Recoda 4CH MINI Mobile DVR User manual
Contents
1. This channel has no video input 2 The camera of this channel breaks down or work abnormality 3 If the camera takes an electricity power from the equipments directly may be the equipment s electric voltage isn t enough to make camera work as usual 4 The cable that links this channel has problem Problem 8 Record files have no audio Probably of the reason is as follows 40 User Manual for Mobile DVR 1 Audio function setup in OFF mode in system 2 Use wrong input cables Audio input including two types One is LINE IN and the other one is MIC IN It will be showed on Record setup interface in system User must select one of them before make a record The cable AINI and AIN2 match with LINE IN mode however cable MICIN match with MIC IN mode 3 Audio output cable didn t connect or connect in a wrong way Problem 9 Device cannot make a record successfully The following reasons might cause this problem 1 Recode mode setup in a wrong way There are 3 kinds of record mode Auto Timed and Alarm Before recording user must to setup record mode in system If 1t was set in Alarm mode but has no alarm right now device will not make a record If it was set in Timed mode but the current time not within timed period same as above device will not make a record as well 2 Overwritten function was OFF and the capacity of SD card less than 500M in this situation device will stop recording 3 The ERR lig2. a i Fn wt AO CALL NO 2 CENTER NO 99 APN ctnet USER NAME card PASSWORD WIRLESS ON enable wireless OFF Disable wireless press the ENTER key to select TYPE WCDMA WCDMA module EVDO EVDO module TD TD module press the ENTER key to select APN APN CMWAP Press the Enter key to enable the keyboard window then use left right up down enter key to setup CENTER NUM Center number Press the Enter key to pop out keyboard window then use left right up down enter key to setup USER NAME Press the Enter key to pop up keyboard window then use left right up down enter key to setup PASSWORD Press the Enter key to pop up keyboard window then use left right up down enter key to setup Click SAVE to save all setup Link mode touch off mode call the device dial up to get on line send the SMS off line Trigger number create with digit Phonetic function select on off with button Enter Call No creates with digit O DDNS DDNS Cursor to the DDNS Press the ENTER key to enter below interface 22 User Manual for Mobile DVR DDNS SETUP DDNS ON OFF TYPE DYNDNS 3322 USER NAME PASSWORD DIO WTAE DDNS Close Open with Enter key to select TYPE DYNDNS 3322 with Enter key to select User Name Password user name and password for setting DDNS press Enter key to enter then enter to th
3. 2CIF D1 optional maximum support 2CH of D1 2CH of CIF 6CH alarm input Level input 1CH alarm output Relay output RS232 interface for remote control RJ45 10M 100M Ethernet port Video recording mode Auto alarm timed and manual recording The video file format is ASF The file can be played by general media player VLC or our customized software which support channel or 4 channels synchronous playback Storage Maximum Ipcs 2 5 hard disk with removable hdd housing plus 1pcs 32 GB SD card Support HDD heater funtion and SD card connector import from Japan Quick start mode the device will turn to working in 25 sec after power on Other start or close mode including ACC on timed turn on off manual boot shutdown the device Voltage supply range is from 8V to 36V the DVR is compatible with the most of vehicles Power output is 12V 1 5A Energy efficient design the power consumption is less than 5W with normal operating state With anti vibration and anti high temperature protection the quality of video files is always guaranteed Operating temperature 25 C to 70 C All materials and PCB production conform to RoHs standard Elegant and industrial design Mini size for easy installation more concealing 4 User Manual for Mobile DVR Dimensions 160 W x200 H x62 D mm Weight 22009 1 2 Appearance Front view Back view User Manual for Mobile DVR 1 3 Remote Control KEY Fei siete a To a
4. can be choose to open or closed while recording RECORD TIME LIST DY EVERYDAY WO NI BAN 4 TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY SUNDAY TIME 1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 TIME 2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Note System will auto start recording within the period in Timed setup Sub streaming set Cursor move to Sub streaming and press ENTER key enter to the following interface 15 User Manual for Mobile DVR SUB STREAM SETUP RESOLUTION CIF QCIF QUALITY Medium High Low SITS RATE 24 32 48 56 64 80 96 1 12 1 28 160 1 76 200 280 FRAME RATE 01 01 01 02 02 03 04 05 07 1 0 1 3 15 20 Resolution CIF QCIF selectable Image quality Medium High Low Bit Rate 24 32 48 56 64 80 96 112 128 160 176 200 280 bits Press ENTER key to enter Default is 96 bit press ENTER key to enter Frame Rate 01 01 01 02 02 03 04 05 07 10 13 15 20 frame Default is 10f press ENTER key to enter Click SAVE to save the configuration 4 4 3 Power Management POWER SETUP POWER MODE DELAY POWER OFF DELAY TIME POWER ON TIME POWER OFF TIME TIME ACC ON OFF 5 MIN HH MM SS HH MM SS Power mode start up and shut down mode by pressing ENTER key to select 16 User Manual for Mobile DVR O TIME DVR w
5. overwritten The default setting 1s auto recording after power on Timed recording and alarm recording are supported Disk Data Support SD cards overwritten function User Manual for Mobile DVR overwritten Video Search Search video files anytime per day type n a and target SD card Playback _ _ __ _ __ ______ ____ Support 1 to 4 channels playback System Playback AAA a a a a ws eee 3 Graphical User GUI Setup system parameters with the remote control Interface Support up to 6 channels alarm input 3 Input Pre record 10 seconds ahead of the alarm Alarm Record duration after alarm can be set in system Pm GPS module can be built out device HTTV 5 0 B the GPS info will be recorded 3 synchronous HTTV 5 0 A Support external GPS module A aeaaaee by RJ45 Ethernet port Selectable with innor 3G wireless transfer WCDMA EVDO HSPA TD CDMA ETC GPRS EDGE WiFi for customized with HTTV 5 08 Optional Function Network ee G Sensor Built in G sensor is available with HTTV 5 0 A and HTTV 5 0 B corr rr rr A An 3 System auto power on off l 3 1 Vehicle acc on off system auto power on after acc on system power off Power Settings l l according to the delay time up to 240min default 5min after acc off Others l l 2 Preset time Only according to time preset table Power off With the power off protection all da
6. setup please press SAVE to save all settings Oo G SENSOR GSENSOR setup Press the ENTER key to enter below setting interface for G sensor configuration G SENSOR ALARM SWITCH ON OFF THRESHOLD VALUES X 2 00 g Y 2 00 g Z 2 00 g STATUS X 0 00 Y 0 00 LIMIT Limit value for X Y Z Minimum value is 0 00g and Maximum value is 9 99g press digit keys to 19 User Manual for Mobile DVR setup ALARM G Sensor alarm OPEN CLOSE setup press ENTER to set it O Alarm Open Open alarm recording and alarm files will be recorded when X Y Z value over than Limit value under record statues O Alarm Close Close alarm recording and alarm files will not be recorded when X Y Z value over than Limit value under record statues CHECK Adjust X Y Z current values when user start up device at first time Press the ENTER key to confirm After CHECK X Y Z value will be 0 Remark Please do remember to click SAVE to save data after setting 4 4 5 Security Settings SECURITY PASSWORD ON OFF USER PWD tilda CONF PWD xy ADMIN PWD D CONFIRM e UE NOTICE PASSWORD IS 6 DIGITAL Password setting PASSWORD ON Enable password OFF Disable password press the ENTER key to select Select and press SAVE to save the configuration Administrator Password should be same as User s Attention Multi device have AC recording at the same time please se
7. the Enable checkbox Both v 51 O after you are finished yuxin 5679 to 5679 Both 1921680 100 O mer chensb 9999 to 9999 Both 192168 0 3 O Y2 5678 to 5678 Both 192 168 0 44 cao 8080 to 8080 Both 192 168 0 6 O 0 to 0 Both 192 168 0 0 F Cancel Changes Picture 2 LINKSYS A Division of Cisco Systems linc x Firmware version 1 0 01 Wireless G Broadband Router WRT54G2 Setu Applications p Setup Wireless Security Brn jape Basic Setup DDNS MAC Address Clone Advanced Routing Administration EONS Service DynDNS org youto ACCESS using dor User Name aaaaabbbbb a anging IP must sign up for service Internet IP DynDNS org Address G More Status DENS is updated successtully Save Settings Cancel Changes veal ee 1 1 Cisco Picture 3 37 User Manual for Mobile DVR 7 2 2 Wireless setting There are 3 types WCDMA EVDO and TD When user set 1t please make sure the type you select must be match with the type of 3G modules Please make a reference in picture 3 3G SETUP 3G FN ON OFF TYPE WCDMA EVDO TD LINK MODE NORMAL TRIGGER NO 1 TRIGGER NO 2 TRIGGER CALL NO 1 VOICE FN OFF ON CALL NO 2 CENTER NO 99 APN ctnet USER NAME card PASSWORD Picture 4 7 2 3 Statues check out 7 Press F1 key on remote control under preview interface to check out current statues It wi
8. 3 The equipment breaks down Problem 16 During playback the map doesn t show Possible reason 1s as follows 1 Net cable did not connect to PC 2 Net works but the computer can not get to the Internet 42
9. EM SETUP ALARM SET SECURITY NET WORK 12 4 4 1 Basic Settings User Manual for Mobile DVR BASIC SETUP _ Three type Y M D DIMI WDY DATE TYPE TIMEZONE DYN IDLE TIME DEVICE NO COMPANY NAME VEHICLE NO DRIVER NAME BUS LINE NO DATE TYPE year month day day month year or month day year Press Y M D GMT 08 00 12 01 12 2009 05 27 09 01 30 30 s Default 30 senconds 11111 Default 30 senconds Company Name 010101010 Driver Name Line number SAVE ENTER to select TIMEZONE Default GM 08 can selectable with or ENTER DATE Alterable with number button TIME The same setup as DATE OPR TIMEOUT All system Interface closed time default time is 30s range 30s 3600s Press digit keys to setup the operating closing time DEV NUM It refers to the device ID Press digit keys to setup the ID While the client uses only one remote control for multi device please setting with different device number and password Device number should be 5 number rename please push DEL to clear up the record end enter the new device number COMPANY NAME VEHICLE NO DRIVER NAME LINE NUM Press Enter key to get the keyboard window displayed and use left right up down enter key to setup Select SAVE and press 4 4 2 Recording Settings Recording data setting ENTER to save the settings 13 User Manual for Mobil
10. R Preview time overlay Yes No select with button ENTER Vehicle Number overlay Yes No select with button ENTER GPS overlay on the record Yes No select with button ENTER CHANNEL DIO SE BAUDRATE PROTOCOL 4 6 7 PTZ Manage PTZ MANAGE CH1 CH2 CH3 CH4 1 0 255 Se 0 2550 91 0 255 ia 4 CHANNEL 600 1200 2400 4800 9600 19200 38400 57600 115200 A CHANNEL Pelco D Pelco P 29 User Manual for Mobile DVR SERIAL MANAGE CHOICES SERIAL 1 PTZ LED SCREEN SERIAL2 PTZ LED SCREEN SAVE 5 Installation guideline 5 1 HTTV 5 0 A and HTTV 5 0 B Pictures HTTV 5 0 A A m HTTV5 0 A device picture ly Without removable hard disk housing AV OUT Connector r 7 mh o F ij Al j Signal transport board 30 User Manual for Mobile DVR 9 1 2 HTTV 5 0 B GPS connector 3G Antenna connector WIFI Antenna connector HTTV 5 0 A device picture without removable hard disk ra SD card slot 5 2 Cables 5 2 1 Power Cable It is power cable picture The red and black cable should be connect to the power level in vehicle Pay attention to the color The red one connect to anode and the black one connect to the cathode the yellow cable connect to ignition cable when switch mode set up in ignition mode The device will power on when vehicle switch on by key automatically When vehicle switch off by key the device will
11. R IP 192 168 001 000 CONTROL PORT 5678 MEDIA PORT 5678 Picture 1 36 1 2 3 4 5 User Manual for Mobile DVR Server IP must be globe IP Default Port 1s 5678 If the computer which running Fclient in local area network Port map must be setting in router Please make a reference in picture 2 There are two types IP setting Domain and IP If customer set 1t as Domain the user router must support DDNS Please make a reference in picture 3 Wireless G Broadband Router WRT54G2 Applications Access Applications ae A amp Gaming Setup Wireless Security Masiro amp Gaming Administration Port Range Forward Port Triggering DMZ Port Range Forwarding Port Range Certain applications may require j to open specific ports in order Application Start End Protocol IP Address Enable ld ld Examples of these applications include servers and certain web 80 to 80 Both 192168 0 160 O online games Ahen a request for a certain port comes in from data 5 0 0 0 to 5 0 0 0 Both s 192 1680 a 6 0 O the Internet the router will route the data to the computer you ServerD 5050 to 5050 Both 192 168 0 155 O specify Due to security concerns you may want to limit ServerD 5051 to 5051 Both 192168 0 155 F port forwarding to only those ports you are using and yuxin 20 to 20 Both 1921680151 uncheck
12. S Document system UPgrAdS oooccnnccononncnncnnonnonconnonnonnonconconnonconnonnonos 34 6 2 HITV5 OX APP Application program Upgrade cccccccccssccessccessecessecesseceeseeeenseees 35 A E a II AN 35 IGUS rO de eon E E E alae cada ese 36 Jols Working systemi Representational 36 dee Parameter Seting A EE E E naan ee N ENO 36 Lillo Network SCUUIIG us aid 36 Taa Weles Se aa aaa a aa a a em tenicteten Geman 38 Tela E E AMA NI A E ate nore nen ne RE 38 A 38 A E cee nega ges seat eee ec csaeeeneee 39 l User Manual for Mobile DVR System Introduction 1 1 Features H 264 main profile Video compression format Support 1 to 4 channels video input Adopt 10bit video decoder processor to ensure picture quality and each video channel is attached with an independent video decoder to avoid disturbing from each other Industrial grade design all electronic components conform to industrial standard through the entire design including the special connectors dedicated for mobile DVR Built in GPS G sensor optional Built in wireless module like 3G EVDO HSPA HSDPA GPRS WiFi optional Support IP call function optional G 726 audio compression 4CH audio input 1CH audio output With the special UPS technology the DVR will work for another 10 to 15 sec after power failure which makes the device shut down normally and keep the file safe Real time recording 100f s PAL 120f s NTSC Recording resolution CIF
13. User Manual for Mobile DVR D VW IGP Y ECHA 4CH Mobile DVR USER MANUAL User Manual for Mobile DVR Contents al eo AA A 4 bis RO 4 Za SERIO De AI ANC nales bocodil 5 Loe IO A A a alee solemn 6 PAs Front pane A hk es hk esse i Rese a Ree 7 LAT LEDO yan E E OE ES E EEEN 7 1 4 2 OUNCES ratio I ko BEDO aeea a a a a Siecle Uae ct Seas 8 A a o PU PA 8 Technique Piramie teis anene 9 E E O 10 dte COn ea II A ad cnc eset eens cts cece cee ee cena ecets eee cenesose ene 10 AD MM Mi e aenneren aaa a tonas ache se oinasncoheas atone ncohekes 11 Ads A A eee een 11 AA SS ieee tau eae E E E E E are ee ae eee ee 12 AAT Basio SEtUInGS rial 13 AA SIRECONCIING MO lolo dodo ended ace 13 4 4 3 Power Minas ment tii iii ire 16 AAA ALAS NaS eos e ese cdas 17 4 4 5 SECU eNOS enra E E sl ice E Aoucedieunt 20 AOs O S N 20 Aan oe ene aaa aaa aaa aaa aa a 24 Ao Manacor A E salient etioee ices 24 4 6 1 Log MAN AMENA A A AAA A E E E EE EEEE 23 4 6 2 SD Card Mana gem nt seniorii atiii ia E E E EE E EEO TE EOT E 26 doos Denok CU Suaa A en a a a 27 4 6 4 Conna Win AA A heen seeenetes 24 4 6 5 gt E 28 Installation cuida edo 30 dl SEMI EN 30 A A A PPP a eam cadet dot 31 User Manual for Mobile DVR eee A rarest ee RN 31 Saks A hi een aa eee eee ea 31 ADA GES PATS AAA AA AA AA AA AA AS ASAS 32 52 3 AV INPUT OULPUE cable adas 32 5 2 4 Alarm input and output cable nio 33 Device Wer ade Cuide in acct tie tis 34 6 1 HTTV5 0X RF
14. ager disk manager system default settings and system upgrade 24 User Manual for Mobile DVR SYSTEM INFO FIRMWARE VER VO00001 HARDWARE VER VO001 MCU VER V0001 CAPACITY TOTAL ANNE 32000KB 2000KB 4 6 1 Log Management LOG MANAGE START TIME 2009 05 27 00 00 00 END TIME 2009 05 27 23 59 59 DATE TIME EVENT NAME 09 05 27 alarm in 09 05 27 alarm in 09 05 27 power on 09 05 27 alarm in Log manager will record the alarm info including date time and name START TIME press digit keys to set up the start time for an inquiry of a log END TIME Until what time to search the logo press digit keys to setup SEARCH press the enter key to search all log info in this time period Press the direction keys to select FIRST UP NEXT LAST and press the ENTER key go to corresponding page Select the page with direction button key ENTER to confirm 23 User Manual for Mobile DVR 4 6 2 SD Card Management DISK MANAGE SD FORMAT FORMAT SELECT SD HDD Disk management is used to format the SD cards SD SELECT to select SD1 or HDD by pressing the enter key CANCEL Cancel disk management operations and return back to the management tool interface FORMAT Select the format button and press the enter key to enable below window for formatting SD cards Yes press the ENTER key to start formatting No Cancel formatting and return back to the disk ma
15. aning as follows OFF This SD card didn t be inserted or can not be identified by the equipments ON This SD card existence but it isn t the one that is recording image at present Flicker This SD card exists and it is the one that is recording image at present Possible reason 1s as follows 1 User doesn t setup record in system 2 Two SD cards all have already recorded full but overwritten function was off in system 3 Although Overwritten function was on in system all the files in two SD card are alarm record ones These files cannot be deleted automatically so SD card can not memory new record files Problem 5 HDD indicator not works or keep flicker The HDD indicator has 3 medium statuses OFF ON and Flicker respectively meaning as follows OFF This HDD didn t be inserted or can not be identified by the equipments ON This HDD existence but it isn t the one that is recording image at present Flicker This HDD exists and it is the one that is recording image at present Problem 6 HDD and SD card indicator not works or keep flicker 1 No record task according to system set up 2 SD card and HDD both record full and overwrite function be set in OFF statues 3 The files are alarm record file even overwrite function be set in ON statues after SD card and HDD both record full the device cannot start make the new record Problem 7 Video Lost in certain channel Possible reasons are as follows 1
16. be power off as well Remark 1 Please make sure the power level voltage between 12V 24V 2 Please make sure insulate all cables after complete connect cables 3 Yellow cable must be connected with ignition cable 4 MDVR Can not make ground strap connection it must get the anode and cathode from power level The 31 User Manual for Mobile DVR diameter of anode and cathode cables must over than 1 5 BLACK BAT YELLOW ACC RED BAT il Vf Yellow It is ACC cable 5 2 2 GPS Antenna 5 2 3 AV input output cable It is picture for AV input output cable 32 User Manual for Mobile DVR Je dun Power output 12 V power output with DC connector 5 2 4 Alarm input and output cable 33 PAL LEND ER Gee O AI O AT ADO A GND E ile Con ALARM IN OUT Y N ee i Ws CD O COMHL SCD Noo 6 Device Upgrade Guideline 6 1 HTTV5 0X RFS crc Document system upgrade User Manual for Mobile DVR serial 1 signal sending serial 1 signal receiving ground serial 2 signal sending serial 2 signal receiving stanby stanby stanby ground DC12V output ground DCSV output relay 2 NO signal relay 2 COM signal relay 2 NC signal ground relay 1 NO signal relay 1 COM signal relay 1 NC signal ground alarm in 4 alarm in 3 alarm in 2 alarm in 1 the orange notes white pink black purple brown white white white black y
17. ctivate the device LOGIN To enter system settings l 0 9 0 9 Under the configuration mode 0 9 stand for numbers under 3 the playback mode 1 2 3 and 4 are for switching between related 3 3 single channel and the number 5 is for 4 channels synchronous 3 playback 3 1 1 For data setting DEL Backspace EXIT Return to the previous interface ENTER Enter button A Y dd 3 up down left right left and right buttons are use for decreasing or increasing volume ann nr bn INFO To display system info under monitoring mode aa With the backward playing button the video files can be played with 3 l 2 4 8 16 times speed Press play button to get a normal speed play 3 Play button A nn nn nn wn Gem mn wn nnn www wn ww nnn nnn 3 With the forward playing button the video files can be played with 3 2 4 8 16 times speed forwardly Press play button to get a normal 3 speed play Record button Stop button is to stop the normal playing and return back to the playlist Interface A e e e e e e e e e e e e e e e e e e e e e e e e e e e e e e e e e e e e e e e nn nn nn a aa a ae ae a ae a a a a e For HTTV 5 0 B only Under monitoring mode it is user to display the info of G sensor GPS wireless module SIM card dial up and so on l F2 Single channel monitor display terrace situation F3 Reserve User Manual for Mobile DVR 1 4 F
18. e DVR RECORD SETUP SYSTEM PAL NTSC RECORD MODE AUTO TIMED RESOLUTION D1 HD1 CIF AAA BITRATE D1 2048 2000 1600 1400 NG D Omen NO 1200 1000 800 600 HD1 1500 1300 1100 900 800 700 600 500 CIF 1200 1000 800 TIME SLICE 15 30 45 60 my 700 600 500 400 300 OVER WRITTEN ON OFF SD FUNCTION NO REC MIRR REC Genes ALARM DELAY 30 30 18008 CHANNEL QUALITY FRAME RATE RECORD CH1 1 4 eG sy 25 30 ON OFF TIME LIST SUB STREAM SAVE SYSTEM Press ENTER key to select PAL or NTSC RECORD MODE AUTO Timed Manual default AC record press ENTER to select RESOLUTIONS Press the ENTER to select D1 HD1 or CIF default D1 Please note 4 channels will be set Synchronously e g if you set CIF the CIF resolution will apply to all channels However if you set the resolution as D1 this setting will apply to chl and ch2 CIF will apply to ch3 and ch4 The resolution doesn t relate with the below Channel Quality Frame Rate Record directly Default 1600KBPS alterable with ENTER or 1 AUDIO Audio recording On Off switch press the ENTER to select AUDIO INPUT LINE IN MIC press the ENTER to select TIME SLICE There are 4 types of time period for continued recording they are 15 30 45 and 60 minutes Press the ENTER key to modify this setting CHANNEL QUALITY FRAME RATE RECORD Those four keys are for the configurat
19. e keyboard interface move the cursor and input corresponding letter through press Enter key DOMAIN With press Enter key to input matched domain and enter to key interface choose the correct letters by moving cursor and then press Enter to input them Click the SAVE after complete setup O WIFI SET Move cursor to WIFI and then press ENTER to enter to the following interface WIFI SETUP WIFI ON OFF ENCRYPT ON OFF TYPE WEP IP 192 168 000 192 GATEWAY 192 168 000 001 SUBMASK 255 255 255 000 SSID WIFI SO 5 DE WIFI Choose ON or OFF with Enter key ENCRYP Choose ON or OFF with Enter key ENCRYTP TYPE Default WEP Choose the type NONE SHARED WPAPSK WPA2PSK WPANON with 23 User Manual for Mobile DVR Enter key IP Address Gateway SUBMASK SSID PASSWORD Remark After complete setup please press SAVE to save all settings and all above settings must match with router 4 5 System Info SYSTEM INFO FIRMWARE VER VO00001 HARDWARE VER VO001 MCU VER V0001 CAPACITY TOTAL ANNE 32000KB 2000KB FIRMWARE VER Software version number HARDWARE VER Hardware version number MCU VER Single chip version number SD NUM Name of SD card Number Display SD and HDD Total CAPACITY Display SD Card and Hard disk s capacity LEFT CAPACITY Display SD Card and Hard disk s left capacity 4 6 Management Tools Management tools include log man
20. ellow black red yellow notes green red notes white the ash notes black black yellow notes green red notes white the ash notes black black the white notes green the white notes brown the white notes blue the white notes black 1 Copy the files to SD card or at Hard disk and please be sure that make the file copied completely 2 Insert SD card or Hard disk when device in disconnect electricity statues 3 Enter to the system choose management and then select upgrade types upgrade via SD card or Hard disk and start upgrade after choose 4 The LCD will show that System 1s upgrading please do not make the device power off 5 When device upgrade complete 1t will re start and go back to monitoring statues 34 User Manual for Mobile DVR 6 2 HTTV5 0X APP cre Application program upgrade Upgrade same as 6 1 6 3 MCU upgrade 1 Make the upgraded file to be copied to SD card or at hard disk then change the file name as Boot flash bin please be sure that make the file copied completely 2 Insert SD card or Hard disk when device in disconnect electricity statues 3 It will upgrade automatically after device power on 4 Check out the updated version through press INFO key on remote control or via System Info in device menu to check it Remark 1 Please make sure never do any operation during upgrading 2 Make sure all the all the upgraded files are in SD card or hard disk Power m
21. fault User Password 111111 10 User Manual for Mobile DVR Attention If the administer closed security setting you will directly go to the main menu without login 4 2 System Main Interface The main interface will be displayed on the screen when you login successfully it contains 4 3 Video Records Playback Select Playback icon with left right up or down key and press enter key to get below interface REC SEARCH ff Pe C C REC TYPE ALL ALARM POSO SD 1D DATE 2009 05 27 START TIME 00 00 END TIME 23 59 Note System will highlight the valid recording info in yellow color 11 User Manual for Mobile DVR REC TYPE press the Enter button to select All or Alarm The default setting is All DISK SELECT press the Enter button to select the SD card The default setting is SD1 DATE Default is current day Press digit keys to reset START TIME Press digit keys to setup the start time default setting 1s 00 00 END TIME Press digit keys to setup the end time default setting 1s 23 59 SEARCH Take curser move to SEARCH and press the Enter key to see the result SEARCH RESULT DATE 2009 05 27 TYPE RES START O Press direction keys to view recording information press Enter to play press ESC to return back O Press direction keys to select FIRST UP NEXT LAST and press ENTER to enter the corresponding page 4 4 System Settings SYST
22. ff to enable or disable recording O Alarm output Support 1ch alarm outputs ENABLE On Off switch 17 User Manual for Mobile DVR ON Enable alarm output OFF Disable alarm output Press the ENTER key to select PWL power level output for alarm High stands for high power level output and low refers to low power level output Select and press SAVE to save all setup O MOVE SET Motion Detection MOTION DETECTION CHANNEL LEVEL ENABLE AREA CHI CH2 CH3 CH4 HIGH MID LOW OFF ON SETUP Channel Number CH1 CH2 CH3 CH4 press ENTER key input Level HIGH MID LOW Press ENTER input ENABLE ON OFF Press ENTER input ENABLE ON start alarm record and records alarm journal when alarm ENABLE OFF Don t start alarm record and don t records alarm journal when alarm AREA SET Press ENTER key to setup Remark After complete setup please press SAVE to save all settings O OVER SPEED Move cursor to over speed and press ENTER key to enter to over speed alarm interface as below 18 User Manual for Mobile DVR GPS OVER SPEED THRESHOLD 60 0 999 km h ENABLE ON OFF THRESHOLD 0 60km h input range 0 999 Key Del to cancel ENABLE Press ENTER key to set up ENABLE ON To start alarm record and records alarm journal when GPS speed overran threshold ENABLE OFF Never to start alarm record and records alarm journal when GPS speed overran threshold Remark After complete
23. ht of front panel shine Can pass to look into a system information If SD card space shows in 0 please check whether SD card has been formatted before use and inserts or not 4 Record mode be set to OFF in each channel Please press Enter button on remote control to switch OFF to ON mode before record otherwise device will not make any record Problem 10 Alarm input invalid May be the following reason to cause this problem 1 Alarm setup in a wrong way in system 2 Alarm input cable did not connect to the device or cable not works 3 Alarm trigger signal to get an electric shock failure Problem 11 Alarm output invalid Possible reason 1s as follows 1 Cable connection in a wrong way 2 System setting in a wrong way Problem 12 GPS signal lost GPS has no signal probably of the reason is as follows 1 Didn t connect GPS antenna 2 The GPS antenna put indoors 41 User Manual for Mobile DVR 3 The GPS module damages Problem 13 G Sensor data abnormal The reason as below 1 The G Sensor damage 2 User did not check the X Y Z data in system Problem 14 Can t playback files on PC successfully Possible reason 1s as follows 1 Have never chosen a record file or document path please choose the path that records file first before playback Problem 15 Remote control not works Probably of the reason is as follows 1 The remote control didn t pack battery 2 The remote control damages
24. ill auto power on off according to the preset time table o ACC System will auto power on off according to vehicle acc switch on off signal DELAY POWER OFF When this function is on the DVR will continue making record for a while as per the configuration When this function is off the DVR will shut down when ACC 1s off Press enter key to select TIME off Shut down system at once Press ENTER key to select DELAY TIME Press digit keys to select The range is between 3 and 240mins Use key Del to cancel number button to enter in POWER ON TIME Press digit keys to select POWER OFF TIME Press digit keys to select 4 4 4 Alarm Settings ALARM SETUP INPUT ENABLE PWL RECORD FUNCTION 01 ON HIGH ON LEFT RIGHT 02 ON HIGH ES MIDDLE 03 ON LOW ON BRAKE 04 OFF LOW OFF FRONT I 05 OFF HIGH ON POSTERN 06 OFF gt BACKING OUTPUT ENABLE PWL RELAY OUTPUT OFF HIGH O Alarm input Support 6ch alarm input ENABLE switch on off ON Enable alarm input OFF Disable alarm input Press the ENTER key to select on or off to enable or disable alarm input Level Setting Setup input alarm level signal HIGH high electrical level input signal will enable alarm Press enter to set the level High or low level can be set with input signal open or close can be set with output signal RECORD ON Enable alarm recording OFF Disable alarm recording Press the ENTER to select on or o
25. ion of every single channel press the ENTER key to set up OVERWRITTEN Overwritten on off switch Press the ENTER key to select ALARM DELAY Set alarm delay between 30 seconds 1800 seconds press digit keys to setup GOP I frame interval Press digit keys to set BITRATE Press digit keys to select Default 1600kbps alterable with ENTER or TIME LIST 2 time periods can be set for a day the DVR will automatically make video records according to the setting This function is available only with the timed recording mode Press the ENTER key to enter below setting interface SD card cannot recording mirror recording recording loss please press ENTER 1 Cannot recording The device can only recording against HDD if the HDD is full the SD card cannot save the video record 2 Mirror recording main stream recording on HDD sub stream recording on SD card at the same time There are three situations that may lead video record failure 14 User Manual for Mobile DVR 1 While HDD do not record the SD card cannot have video record 2 SD card 1s not available 3 HDD 1s not available SD card cannot record 3 data loss HDD error or HDD not available SD card main stream record Attention HDD priority while both HDD and SD card is available Four channel image quality from level 1 to level 5 the highest is level 1 the lowest is level 5 Frame rate PAL 1 25 frame NTSC 1 30 frame the frame rate
26. ll show the information about 3G modules Such as whether 3G or SIM card exists or not Signal and dial up statues Please make a reference in picture 4 7 3 PC software setting Make Fclient software running first When device dial up successfully it will connect automatically with server which set by user Green color means connecting Please have a reference in picture 5 38 User Manual for Mobile DVR MM EF NAO Picture 5 8 F A Q Problem 1 The power indicator not bright after power on The following reasons will cause the power indicator not works 1 Electric voltage isn t within the range of 8 36 V 2 The fuse in power cable was burned 3 ACC setting failure or ignition connects in a wrong way Problem 2 ERR indicator keep on light The following errors will cause the ERR indicator keep on light 1 Two SD cards didn t be inserted 2 The system partition under abnormal statues even the SD card be inserted it also can cause the equipments can not be identified 3 MCU not works 4 SD card cannot read and write in normal Problem 3 Channel indicator not works The following reasons will cause the Channel indicator not works 1 No video signal input 2 Cameras break down 39 User Manual for Mobile DVR 3 Indicator is damaged 4 The system cannot be operated in normal Problem 4 SD card indicator not works or keep flicker The SD card indicator has 3 medium statuses OFF ON and Flicker respectively me
27. nagement interface 26 User Manual for Mobile DVR Yes press the ENTER key to start formatting No Cancel formatting and return back to the disk management interface 4 6 3 Default Settings RESTORE TO FACTORY DEFAULTS Yes Press the ENTER key to recover all parameters to the original default settings No Cancel this operation and return back to the management tool interface 4 6 4 Config Management Import and export config file 27 User Manual for Mobile DVR CONFIG MANAGE m IMPORT CONFIG FILE SD HDD EXPORT CURRENT CONFIG FILE S Dyin BIB Import Configuration Import the DVR CFG file into device from the SD card or HDD Export Configuration Export the DVR CFG file from device to the SD card or HDD 4 6 5 System Upgrade SYSTEM UPGRADE CURRENT VER 1072101 T072701 V000001 V000001 UPGRADE TYPE Uboot Kernel Rootfs App UPGRADE FROM SD HDD System current version Select matched version according to upgrade type Upgrade type Press Enter to choose the type such as Application program bootstrap program kernel program Upgrade from SD card or Hard disk Remark Upgrade type should be match with select way 28 4 6 6 OSD Setup User Manual for Mobile DVR OSD SETUP REAL TIME DISPLAY TIME YES NO RECORD OVERLAY DISPLAY RECORD TIME YES NO VEHICLE NO YES NO GPS YES NO Record time overlay Yes No select with button ENTE
28. parate name the device and use different password The Device ID can be set in the menu of basic setting 4 4 6 Network Settings Network parameters should be set on the device The system will detect devices without any further setting if 20 the configuration is correct Local Network User Manual for Mobile DVR NETWORK SETUP LOCAL NETWORK IP ADDRESS NETMASK GATE WAY MAC CENTER SETUP y Sn OA he 7 255 255 255 000 192 168 000 001 TYPE DONNE SERVER IP CONTROL PORT MEDIA PORT 00 44 53 75 55 56 IP DOMAIN 192 168 001 000 5678 5678 LAN CONNECT Set up IP address net mask gateway MAC address etc and please set the server IP in same with net mask s Please make a reference on the above picture WAN CONNECT No need set up network on PC CENTER SET LAN CONNECT Server IP must keep same with device s and the port number is 5678 WAN CONNECT SERVER IP Set up WAN IP PORT NUMBER If user get online via router make a port mapping is necessary the port number is 5678 DOMAIN If user use dynamics IP user can apply a DDNS account and then to set up DOMAIN for example www 123 cn 3G wireless settings Press ENTER key to enter the following interface 21 User Manual for Mobile DVR 3G SETUP 3G FN ON OFF TYPE WCDMA EVDO TD LINK MODE NORMAL TRIGGER NO 1 TRIGGER NO 2 Toar CALL NO 1 010
29. ront panel 1 4 1 LED indicators PWR Power LED LED light means system has powered on ALM Alarm LED REC Record LED LED Light means device is recording HD HDD light on means load successfully Lights off means load failure Flicker means video recording GPS GPS signal ERR Error prompt V Loss1 Video Loss HTR Heater SD SD card Light on means load successfully Lights off means load failure Flicker means video recording NET Network 1 4 2 Others IR Infrared receiving terminal LOCK HDD Lock device cannot to start without lock MIC MIC input EAR EAT output User Manual for Mobile DVR 1 5 Back panel PWR Power connector 21 GPS GPS antenna connector EXTEND I O Extend I O connector RJ45 Network connector AV IN AV inpurt connector AV OUT AV output connector 21 WIFI WIFI antenna connector 2 3G 3G antenna connector 2 GPS WIFI and 3G antenna use for device M705B 2 Specifications Function Item Description Channel 1 4 channels Support CIF HD1 D1 resolution compatible with 2CH of D1 amp 2CH of CIF fps 1 to 25f s ch adjustable PAL or 30f s ch NTSC Overlays information such as date time and vehicle ID vehicle number Recording A EGET ER RAE SET AE CF EG Support two SD card recycle recording Automatically switch to the other one System SD card REC when the first SD card was full and the data will be automatically
30. ta can be saved safely and the recording can protection be closed normally after power failure 3 Technique Parameters Processor System Hisilicon Hi3512 H 264 main profile Linux 2 6 Security Two level password protections for administrators and users O Video Input Output Input 4 CVBS 1 0Vp p 75Q Output 1 CVBS 1 0Vp p 750 9 User Manual for Mobile DVR Audio Compression G 726 5KB s Alarm Input Output 6 channels input 1 channel output Video Recording Recording Resolution D1 HD1 CIF MAX 2 channels of D1 and 2 channels of CIF Record Quality 1 5 levels 1 is the highest level and 5 is the lowest level Record Mode Default Auto Record Other modes Timed and Alarm Record Optional Record Storage Maximum support one 32GB SD card and one 2 5 inch hard disk Search Video Record according to record time record mode and record storage Record Search device etc Record Playback Max support 4 channels playback synchronous Communication Interface RS232 interface for remote control RJ45 10M 100M Ethernet port Wireless Transfer Built in 3G WEVDO CDMA200 TD SCDMA or optional GPRS WIFI and EDGE Module GPS and G Sensor built in Temperature Humidity Normal Temperature 0C 50 C Heater 25C 50 C Humidity 20 to 80 4 GUI 4 1 Login Eojeiiy DEVICE NO 00000 USER NAME user admin RRN 21D KKKKKK Factory Default Username admin Factory Default Admin Password 888888 Factory De
31. ust be off before upgrade 3 If user have to upgrade device again please be noted that the same version cannot be upgraded to it 4 The correct upgrade sequence is file system upgrade application program upgrade and the last one is MCU upgrade 5 When device re start during upgrading it means upgrade has finished automatically 6 4 Edition number Press key INFO onthe remote control enter in the menu System info to check the edition 6 5 Restore to factory default Enter in management menu restore to factory default the device will restart to the monitor state Attention 1 While the device upgrade please make sure not to have any other operation 2 Make sure the upgrade file is saved in SD card or HDD also the device should be power off before upgrade 3 The upgrade sequence is File system Application system SCM 4 The device will restart against upgrade finished S Device had restored to factory default 35 User Manual for Mobile DVR 7 3G User Guideline 7 1 Working System Representation External Module G Sensor GPS Jerone JE ER WCDMA 3G EVDO Remote Control Wireless network Remote monitor center PC Management software 7 2 Parameter Settings 7 2 1 Network Setting NETWORK SETUP LOCAL NETWORK IP ADDRESS 192 168 000 192 NETMASK 255 255 255 000 GATE WAY 192 168 000 001 MAC 00 44 53 75 55 56 CENTER SETUP TYPE IP DOMAIN BIO TANINE SERVE
Download Pdf Manuals
Related Search