Home

2N OMEGA Lite - Config tool L&Scaron; 1340v.1.6

1. OMEGA Lite Configuration instrument TELEKOMUNIKACE 2 1 9 Emergency numbers A table listing the emergency numbers that the lines can call without authorisation 15 numbers are available with a maximum of 16 digits 2 1 10 Passwords 2 1 10 1 The password for users classified as Supervisor The table for entering the supervisor s password This password is used for instance during the RESET services of the PBX etc The user with the Supervisor authorisation has access to all parameters in the PBX and can also change passwords for users with the User authorisation 2 1 10 2 The password for users classified as User The user with the User authorisation has the possibility of changing only some of the PBX parameters when programming and can change the password for the user with the User authorisation All parameters are available for reading 2 1 11 Bank holidays A table in which up to 16 annual bank holidays can be entered The PBX behaves as though it were a Sunday 2 1 12 Charging A form for entering the types of calls recorded in the call memory The entry Record incoming numbers allows a record of the incoming calls to be made in the accounting rows for ports so enabling this The entry Record the entire number of private calls enables the numbers of private calls to be recorded Charge Incoming Incoming unserved Log IV Write IV Write IV Write IV Print IV Print JV Print Outgoing Private Iv Write
2. User s manual configuration instrument 25 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 1 17 AUDIO Groups The AUDIO inputs outputs include eight AUDIO groups to be assigned to the Broadcast Tape recorder service in the Groups Switches Broadcast Tape recorder menu AUDIO Groups Group 1 v auxi aux2 7 4 mif m auxs auxe aux7 es Group 2 aui M aua s Eji m aus M auxe M aux MA Group 3 auxi auxz aux 7 auss 7 auxe 7 Aux au Group 4 aux Aux2 P auxs auxe auss A aux AU Group 5 Au aux2 aus TA aus a aux 7 Au Group 6 auxi aux2 7 4 M aux 7 auss 7 auxe 7 aux a Group 7 au au2 4 A augs A aux aA Group 8 auxi aux 4 15 p aus A aux A 2 1 18 AUDIO Relay Each AUDIO input output can be assigned one relay The relay closes when the given AUDIO channel is used for the Tape recorder Broadcast service Typically this option is mainly used for Broadcast with the relay activating the so called Broadcast exchange User s manual configuration instrument 26 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE AUDIO relay AUX1 Relay3 nd AUX2 Relay4 d 2 2 Internal lines 2 2 1 Numbering This item offers a list of internal subscribers to the PBX Here the individual ports are assigned a subscriber number and a name The name is allowed to up to 14 characters the numbering
3. Duty 16 WAT BI CT DIVET F M Use Duty 17 WAP BS CT DIVvETL F M Use Duty Day Night J Private This table sets the authorisations for calling to a public telephone network in particular each internal line for the DAY regime the NIGHT regime and private calls in an arbitrary regime Here it is also determined whether a line will obligatorily use the LRC or not and what level of savings for route selection If tables A F are checked then it means that the given internal subscriber controls the selection to an external network on the agreement of the number called with the values shown in tables A F If the number called is in agreement with the number in the prohibition table the call is ended If the caller has the prohibition table checked then they can only call the numbers entered into the table If the User s manual configuration instrument 29 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE combination and permission tables are combined then the permission table always has preference If the choice Use LCR is not checked then after selecting the start up service to an external line the direct free external line is allocated without using alternate routes in the LCR Without this choice the PBX behaves as standard If this choice is checked so that after selecting the service start up to an external line no port picks it up the caller receives a simulated external dialling tone and carr
4. USER MANUAL Configuration Program Version 1 6 User s manual configuration instrument 1 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE Dear customer Our compliments on buying the 2N OMEGA Lite This new product was developed with an emphasis on the maximum possible use value quality and reliability We hope that you will be utterly satisfied with the 2N OMEGA Lite for many years to come User s manual configuration instrument 2 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE CONTENTS 1 The PBX configuration instrument menwu e eenee seen etna annt nn ananas 5 alee men U0 MC EE 5 PZ VV MINOW S 52s ccaseate an eate eU M puta pua MM EMI IM I MMC EE 6 1 9 SSNS oett to tet tems 6 MEI 7 2 Programming tables for the 2N OMEGA Lite PBX eere 7 2 Vey Global data c ERR 9 2 1 1 Informa ton M E E a EE E E E 9 2 1 2 HardWare sinesine E EE E EEE ee einen a a 11 2 1 3 Diagnostics for the PBX and localisation nennen 11 2 1 4 External lies ion rer nere aden abn HI Re eren ir eret ERST 12 2 1 5 licut cece ieee tetas eee ee 15 2 1 6 Tone parameters etre ver en E E A RII CHER e PR en Fee UI ety 17 2 1 7 Paratneters for voicemail sss 2 e nen n iit ncn n In Dr ean 18 2 1 8 Authorisation Tu Imber coc euere ea Ee E E a a a s 18 2 1 9 Emergency tiumbets uniri RERDRUHCRERER
5. amp fF if 2p 3p 4 Vip 2w3iv4pM 8001112224 In the rows of this table the number dialled to an external network from a subscriber who has ticked the choice Use the LCR is compared with the numbers entered here This comparison eliminates the rows that are not in agreement in at least one of the four masks for dialling analysis for an internal subscriber and the Rows of the dialling analysis The result is a route number routes ranging from 0 150 though which the outgoing call will be dispatched In the table rows it is also possible to set up a mask for choosing the ARS 1 4 service These services are primarily used for access to private networks The next chapter gives some illustrative examples User s manual configuration instrument 65 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 6 2 Routes providers Here routes are allocated that can be used by the external line bundles to make a connection They are always selected in the order of the first external line from the bundle At the same time this is where it is defined how many numbers from the number called are subtracted and what numbers are prearranged or which operator will be selected for providing a least cost route Saving automat Providers Em It is also necessary to enter on what day and hour the given route is to be used The selected bundles use it independently of the programmed bundle selection for the int
6. Configuration instrument TELEKOMUNIKACE 2 8 Numbering 2 8 1 Internal lines See Internal lines Numbering 2 8 2 Services e Table for programming the numbering plan of the PBX s services 2 8 3 DID for the ringing table Enables an external subscriber to call through to the ringing table during a DID If the DID number is not in agreement with the subscribers DID or internal numbering and agrees with the number in the DID table for the ringing table then the ringing table is used here set up with regards to the DAY and NIGHT regime Enables the ringing table to be set up during DID ISDN Point to Point type DISA 2 9 Operating parameters 2 9 1 Internal lines 2 9 1 1 Redirecting This table clearly displays all of the redirecting for all of the internal subscribers 2 9 1 2 Tariff credit The item Prepaid serves for assigning the maximum number of 16 kHz impulses received When the assigned number is reached the call automatically ends A new call can be made as soon as a new credit programme is topped up 2 9 1 3 Blocking Here it is possible to easily check or set blocking for each internal line including its password and not stop the service 2 9 1 4 Alarms Set up an alarm on each line It is possible to choose between Single or Repeating 2 9 1 5 Account statistics Clearly displays the costs of the internal lines from outgoing calls through the external lines that have tariffs An update is
7. Emit Dealer Name Chales Street Serial No City OO ZIP 0609 50006 Emit Remark H J OK X Cancel 3 you must fill in the PBX Serial number 4 you must fill in a phone number which will be used for the remote modem connection 5 you may enter information about customer and dealer 6 click OK for confirmation 7 choose the correct code from the offered codes and write it into the PBX by pressing Store Code While writing the code it is necessary to be connected to the PBX over serial interface 8 While writing a new code you will be notified if a code already exists By pressing Ignore button code will be overwritten User s manual configuration instrument 91 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE Licence storing PIN stored in PBX 0609 50006 Cancel Reset PBX Reset PBX Note Always create access codes matching an existing valid serial number of gateway User s manual configuration instrument 92 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 14 4 Description of OMEGA Lite Program Menus and Bar Buttons MENU WINDOWS Panel when the connection with the PBX to be supervised has been established the statuses of all lines and speech buses are displayed Billing data when billing and diagnostic lines have been read from the file Y
8. IR RED UE E te ES 20 2 1 10 P SSWOFdS eee eter erede exte gen avtod ee eutetes E Dexia eed gea ee Eee ues Ded da xd ge Paene udaue dta 20 2AT Bank OWA ys eee etre ri tete peindre tte deine dot tote PR ae dre ed anh o 20 2 112 Charting oe emet deti teta at edt t a se tente tes 20 2 1 13 Tones and tin Ege eed emet ae tete dinem ted inbne de tutes iain te EEE 21 2114 VOIES ue EEE elivehider tabbed OT TAA teeadetined caste hed exkbned ont eveese Saeed aes 23 2115 Modemi seeren 24 21 16 GSM Call Vol me L vels 4e rette metet teet O EET E 25 ZL AUDIO GIo pS 5 oett eter be tete abet bem trends AAEE ER EKE AR EE E pe ie 26 DANS AUDIO Rel y oce tret ee EREA EE NENEN 26 2 2 Internal liess eruere vipPcC PN ean enn II 27 2 2 1 Num sen See ee 27 222 ACCESS to extermal ines e RU gota d RIMIS RI I IRR eR eee eiateeneiates 28 2 2 3 P rmitting Servicess E HU 32 2 2 4 brin f EE 35 2 2 5 Allocating to a group and a department sessssesseeeeeeeeeeren nennen nennen nene 35 2 2 6 Callins re Resource 35 2 2 7 Giles sire Po a p MERE 35 2 2 8 FLASH settings and the type of dialling eese eene 35 2 2 9 Allow direct dialling to bundles eeseeseeeeeeeeeeeeeneennnee nnne nennen nennen 36 2 2 10 Work and private MSN ssssesseseseeeeeeene enne nennen nnne nenn
9. Silence Fluctuation aE 4b 4b lh Jitter period ms CPT detection treshold 100 Y DTMF Increasing of DTMF resistant for DISA Min length of the DTMF sign that is accepted in the DISA direct inward calling Increasing of DTMF resistant for VMail Min length of the DTMF sign that is accepted in VoiceMail Amplitude of the DTMF L Group the size of the DTMF sign s amplitude as a rule itis not necessary to change it Amplitude of the DTMF H Group the size of the DTMF sign s amplitude as a rule it is not necessary to change it The PBX has two tone generators which can be used as tone sources when setting Tones The tone can be formed from up to three varying frequencies When forming the tones it is necessary to uphold the rule on the overall size of the amplitude 1 Frequency Amplitude to 62 User s manual configuration instrument 17 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE 2 7 Frequency Amplitude to 31 3 Frequency Amplitude to 21 Generator 1 sine 1 Default frequency 425 Hz Generator 2 sine 2 Example of forming a British tone Amplitude of the voice modules The default value is set at 64 and it is not recommended to change it Busy tone detector parameters Count of CPT periods minimum count of tones beeps according to ITU T E 180 before hang up Silence fluctuation intensity of the silence signal 0 65535 Jitter period tone duration tolerance
10. ED PEE RE Ee Eee 99 2 14 9 Panel eese nee erre REP RP rA E PE a De EP PEE RED EC 99 2 14 10 Remote Supervision LOEIS ICS iii ione re bee te uon genie uec dui qe eade a Rode RE NER edd 99 2 14 11 Discornnectmg Connection reet pet e re ot de ue dove pU eens 99 2 14 12 Cancelling ContiecttOn oec eek ete tube te get ved pee ek eee pane e DRE nese este ees 100 User s manual configuration instrument 4 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE 1 The PBX configuration instrument menu The basic menu for the PBX configuration instrument contains the following items Configuration tool for 2N OMEGA Lite actuel cfg 10 x p Data Windows Set Help 18 x peg Sh 2 7 e N 2 AVS 5 he ua 7 7 8 First instalation Thematic index Alphabet index E3 Internal lines CJ System lines Global data 4 Virtual lines External lines Ea Saving automat Used for programming of PBX global data 1 1 Data e New Making a new PBX configuration file e Open Opening a current configuration file e Close Closing an open window with a configuration file e Save Saving a file e Save as Saving a file under another name e Firm values Using the factory settings in the default set up e From the PBX Reading the configuration from the PBX e To the PBX Saving a configuration into the PBX e Reset the PBX Reset the PBX the same function as turning on and off e Time synchroni
11. GSM2 Sol User s manual configuration instrument 59 www 2n cz 2N OMEGA Lite Configuration instrument 2 5 7 Ringing table TELEKOMUNIKACE One of the following actions can be programmed in each row Action Parameter Description Ring VL VL number or SYS Ringing for a specific number Ringing for a specific number If engaged EURO VE eon VL number or SYS then it does not form a queue If only one che gia ringing then it rings on Ringing for a specific number If engaged Mire Mire VL number or SYS then it does not form a queue and carries out the command two rows below Ring VL without Ringing for a specific number and jumps two a queue and VL number or SYS rows down If engaged then no queue formed jump and carries on in the ringing table Ringing for a specific number and thus d bed VL number or SYS identifying itself even in a voice system if the ringing is forwarded Don t ring VL VL number or SYS Ends ringing to a specific number Ring accessible None Ringing accessible internal and system lines Ring accessible None Cyclic ringing accessible internal and system cyclically lines Ring accessible None Ringing the first of the accessible internal and linearly system lines Ring accessible None Cyclic ringing accessible internal and system cyclically no lines If it is engaged then it does not form a queuing queue If only one ringing then it rings on None Ringing the firs
12. Iv Write IV Print IV Print v Write incoming numbers J Write whole numbers of private calls Impuls fee 0 30 US User s manual configuration instrument 20 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 1 13 Tones and ringing Dial tone Special dial tone Gener sine 1 ozT MORSE Baby Call tone Gener sine 1 ozr MoRSE K Network dial tone Gener sine 1 oz MoRsE 4 Busy tones Busy tone Gener sine 1 oes 330 330 CZECH Congestion tone Gener sine 1 oes 160 150 CGT Not allowed service Gener sine 1 08s 330 670 Ringing from IL Gener sine 1 RING_ MORSE_M co Gener sine 1 RING_ 1 4 Waiting VL Gener sine 1 oBs 330 330 CZECH Gener sine 1 RING MORSE N x co auxi Permanent tone In this screen you can change the type of tones and ringing in individual states The screen is primarily meant for special applications It is necessary to select Tone source left part of the table and Tone cadence right part of the table The types of tones heard in the handset and ringing heard on the telephone Dialling tone e Special held calls e Baby call activate the Baby call dispatcher regime e Network dial tone simulated tone when using ARS call back regime internal GSM and ISDN in certain cases Busy tone e Busy the person called is engaged the service cannot
13. PSTN Priorita TRUNK2 X 2 i EE TRUNK4 v 255 TRUNKI6 vj 255 kb Lb TRUNKI v 2 cn c adde ud Ek TRUNK1 v TRUNKI v 2 e MEME TRUNKI v 255 This table is for allocating a selection of bundles for external lines to internal lines analogue and system subscribers If an internal subscriber chooses the service Access to an external line and the LCR is not activated or they are returning from it because a different cheaper route was not found then for calling to the VTS the priority external line is first used and if the first choice is not available then the first free external line selected from the bundle The priority line can even be from a disallowed bundle If for instance we imagine 4 varying privileged groups of subscribers from the standpoint of their choices for a free external line ignoring the LCR The first circuit will be 2 internal lines to the flat of the building administrator the second circuit to the director with an assistant and a company fax the third circuit will be 4 traders and the fourth circuit the other employees with the lowest set selection for an external line In order to meet these requirements we split up the external lines except external lines allocated to GSM phones into for instance 4 bundles Bundle 1 has 1 external line for the building administrator s flat External lines 2 User s manual configuration instrument 28 www 2n cz 2N OMEGAL
14. Speed Dialling sssssssssseseeeneeeeeenennenn nennen nnns 83 2 12 1 Common Abbreviated Dialling eese ener enne enne 83 2 12 2 Private Abbreviated Dialling si 52 iret eere eee CHEER nents 84 2 13 Export Import of Abbreviated Dialling seesssseeeeeennnnnnns 85 2 13 1 Common abbreviated dialling Export eese nne enne 85 2 13 2 Private abbreviated dialling Export eese nne nennen nennen 86 Abbreviated dialling Impott 2 3 3 tee ette e I tesi don RE tUe a ie done ines 87 2 13 3 Errors during Abbreviated dialling Import eese 88 2 13 4 Creating of Abbreviated dialling file essere nene 89 2 14 REMOTE SUPERVISION anneanne annaa aaa aa a ntes ndis nnns aaa nsns nnn 90 2 14 1 What Remote Supervision Provides eese nnne nennen nene nere 90 2 14 2 What You Need edes reete e eria pietre peter dtp 90 2 14 3 Creating and writing of a gateway remote access code esseseeeeeeeenre 90 2 14 4 Description of OMEGA Lite Program Menus and Bar Buttons eeeeeeeeee 93 2 14 5 Types of Establishing Connection nennen nnne en nene 95 2 14 6 AUTOMATIC CONNECTION sesiis rit Fir HE FE EE IRE E HE ER PU HER UE HE a eh 95 2 14 7 MANUAL CONNECTION isien a ERE E IE Ue EET PEDRO Ine Hee eee 98 2 14 8 Downloading Data treten e EE RA edi EE PER De
15. abbreviated dialling Export fill in the Common abbreviated dialling and choose Export in Menu Data User s manual configuration instrument 85 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Ulo it jako 2 x Ulo it do e Prg_Short J 3 er E3 N zev ShortCom souboru Ulo it jako typ Fix column width odx Stormo Semicolon separator csv TAB separator adt Fix column width ods name of the file is automatically given ShortCom with a destination folder where OMEGA Lite Program is installed choose the type of columns separation index number of the dialling text number Separation may be done using semicolon csv tabulator odt or fixed length odx click on Save to save the abbreviated dialling 2 13 2 Private abbreviated dialling Export fill in the Private abbreviated dialling and choose Export in Menu Data Oteviit 24x Oblast hled n E Prg_Short J a ex E3 ShortL11 csv ShortL12 csv ShortL13 csv N zev Shout souboru Soubory typu Te odd len st edn kem csv Storno User s manual configuration instrument 86 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE name of the file is automatically given ShortLxx according to the extension number with a destination folder where OMEGA Lite Program is installed choose the type of columns separation index
16. agreement with the row in the Dialling Analysis Note e Setting the authorisations is independent of the LCR e The selection Obligatory LCR must be selected at the same time as Use LCR Example 1 The subscriber is not allowed to call abroad Then table B is ticked in which only one row is filled in with the value 00 The other boxes are not ticked Thus if they use OO as the transfer sign to the international network then the call is ended Example 2 The subscriber is allowed restricted external calls they are not allowed 906 they can only get to GMS Paegas through the GMS phoning module Then they have Tables A and B ticked in which only rows are filled in with 00 and 906 and they also have the boxes Use LCR and Obligatory LCR ticked At the same time we assume that they have the first of the four savings levels ticked and the row Analysis of Savings is also ticked at the first of the four levels After dialling 603 it is found that there is agreement with a route though GSM and if the route is free then the call is made The route analysis is filled in so that in one row there is the code 603 followed for instance by the number for route 1 Thus the route number is programmed as to which bundle is used and the entries for adding and removing numbers are left free see programming the LCR If the GSM route User s manual configuration instrument 30 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUN
17. and cannot be removed Go to line Row number Jumps to the selected ringing table row Connects the AUX assigned to the Announce Broadcast service plays the voice message through Voice message and the AUX Broadcast remains connected broadcast until hang up or the Terminate broadcast service activation GSM DTMF test None While calling to a module equipped with DTMF detectors designated as OL2GSMD OLGFAX at 2N you can dial the DTMF characters during ringing that are displayed on the PBX Attention The total number of rows in all of the ringing tables cannot exceed 500 User s manual configuration instrument www 2n cz 61 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE Here are some working examples for illustration Example 1 During incoming ringing it has to concurrently ring lines 13 14 15 and 16 and all lines that have ringing from external lines accessible All lines ring at the same time until one of them takes the call or the call ends externally Example 2 During incoming ringing it starts ringing line 12 after 10 secs it stops on line 12 and starts on line 14 After another 5 secs it transfers ringing to lines 13 and 15 Then all 3 lines ring until one of them takes the call or the call ends externally Of course it must ring the accessible line first Example 3 During incoming ringing it rings the group linearly Again we bear in mind the lines that h
18. automatically chosen as the first DID through a superior PBX after engaging a line The prefix is not recorded in the charging row e Min time for accounting the period deducted from the call time for temporary charging e Priority an internal line must have higher or the same priority so that it can use this external line e Series fill in the series number or numbers incoming series number without DID numbers or leave the series empty if the ISDN network operator only sends a DID number for precise information ask the operator of the ISDN network e MSN the line in the PTMP connection e MSNi s fill in the MSN number 1 to 8 e Main group dividing up the MSN numbers into two groups for the option of switching to the DAY NIGHT regime and other functions related to group 1 2 e Deactivating 2 layer by authorising it deactivates the second ISDN layer after setting the time User s manual configuration instrument 51 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE GSM line Digital line types Line Mame Options cs gateway ah PIN without autoriz Min time For accounting s 1 EH Roaming enabled V Receive SMS V Send SMS SMS after no answered call SMS after accepted call Trace GSM CLIR selection Belong operator Y Prefix Priority o SMS at No Answer Missed call from on Soc 91s Mobility extension SMS after accepted cal
19. available during each data reading from the PBX User s manual configuration instrument 73 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 9 2 External lines 2 9 2 1 Making accessible The table has as many columns as there are internal subscribers and as many rows as there are external lines Thus at intersections it is possible to tick or end an internal subscriber s access to each external line 2 9 2 2 Tariff credit and Blocking The item Prepaid serves for assigning the maximum number of 16 kHz impulses received When the assigned number is reached the call automatically ends A new call cannot be made through this external line Credit must be topped up through a programme The item Blocking enables an external line to be blocked for example during a breakdown User s manual configuration instrument 74 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 10 Mobility Extension Mobility Extension function enables telephone stations preferably GSM telephones to share internal line services switching dialling VTS outside the PBX Primary setup is made by the PBX administrator 2 10 1 Mobility Extension IN Here you set up the conditions for Mobility Extension in the incoming direction from the external telephone number preferably from a GSM telephone Mobility Extension In Number Password Order of used common short dial Enter Line
20. be provided e Congestion blocked network from an external network the line is broken network is blocked wrong number no credit calling internal network telephone broken full queue cannot be redirected reject User s manual configuration instrument 21 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE e Not allowed service unauthorised entry entered an unauthorised service or line lock timeout selection cannot be done Ringing from An internal line The intercom An external line Call back Return from redirection Alarm Waiting tone e VL calling from an internal line e SYS calling from a system line e CO calling from an external line Ticking e When connecting e End CO CO at the end of a call between two external lines there is a ticking before break up Before entering this screen there is a warning about the possible negative effect operation may have on the PBX after an unprofessional change to the tones User s manual configuration instrument 22 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 1 14 Voices Here you can change the voice settings system user and music to make waiting more pleasant System voices The PBX contains 11 systems voices The voices notify the user about being redirected accepting the service dialled a more expensive call in the LCR least cost routing etc In this category there is also music to
21. extenders 19 buttons Advance telephone type 1x90 button Extender up to 109 programmable buttons Overall number of all programmable buttons can be up to 460 for the entire system For 2N StarPoint telephones it is possible to select from several ringtone melodies The melodies for individual types of calls can be assigned in the environment PBX Configuration tool system lines buttons user settings User s manual configuration instrument 42 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Earphone volume Handsfree volume Ring volume LCD contrast J 1 1 i 1 Internal call Berinphone x External call Moonwave x Alarm clock Buzz x Door communicator Bome S e Call retum BueSky x VIP call Frozen Decet gt Next call Hoy mey Back call Weaky Giran Special call Specialcal gt Set Key loudness allows an acoustic signal when pressing system telephone buttons Earphone volume volume control for the earphone Handsfree volume volume control when using handsfree Ring volume the volume when ringing LCD contrast the intensity of the display contrast Internal call the type of ringing from an internal line External call the type of ringing from an external line Alarm the type of alarm call Door communicator the type of ringing from the door communicator Call return the type of ringtone if a call is returned VIP call the type of
22. for example User s manual configuration instrument 15 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Internal lines Global data Pulse Pulse 1 dial time Dial time mmm BE EE Ee ee Crossing time to Failure loop cen e Bad dial key protection Switching on lock Ticking after attach E EE Back to Forwarder Back to operator EE EE End of switching over Ringing of holding CO End of holding a a Time of back ringing a Length of alarm ringing D e E Delay from front Increasing of DTMF resistant for DISA Increasing of DTMF resistant For VoiceMail Bulk Forwarding to VM Trace Digital phone L2 Trace Digital phone Ring User s manual configuration instrument 16 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 1 6 Tone parameters Parameters of tones DTMF Increasing of DTMF resistant for DISA J e al 3 A J e 4b 3 D Increasing of DTMF resistant For YoiceMail e N i Amplitude DTMF L Group Amplitude DTMF H Group 62 T Generator 1 Frequency 1 425 Amplitude 1 46 Sj Frequency 2 o Amplitude 2 Frequency 3 0 Amplitude 3 T b ad Generator 2 Frequency 1 350 Amplitude 1 Frequency 2 440 Amplitude 2 Frequency 3 n E Amplitude 3 Voice modules auu TS 4b lab lat 34 4 Amplitude voice modules 64 Busy tone detector parameters Count of CPT periods
23. group Ringing from this line is characterised by being different from the usual ringing Groups Porters Group 1 Line Relay Number Porter 1 17 Relay oo Porter 2 no Line Relay Number Em joo Porter 2 joo r amp roup 2 The selection Number enables a DTMF number to be sent to the intercom e g 00 for 2N INTERCOM to open the door If the door communicator is not equipped with a door opening relay use the module relay and select the Activate relay service for activation 2 7 4 Switching time Groups Switching times Group 1 Group 2 bs wor ps IE 12 00 12 30 17 00 12 30 13 00 16 00 16 00 0 00 0 00 15 00 0 00 0 00 11 00 12 00 15 00 12 00 0 00 0 00 0 00 0 00 0 00 Mme 0 00 0 00 0 00 000 0 00 0 00 0 00 000 000 0 00 0 00 000 000 0 00 0 00 000 0 00 0 00 0 00 000 0 00 0 00 0 00 000 0 00 0 00 State Day v Automat State Day Automat v Day light saving User s manual configuration instrument 70 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE In this menu it is possible to set two times for automatically switching to the DAY and NIGHT regimes for each group and for every day Ticking the box Automatic gives automatic switching at the requisite times Not entering anything for the time means that there is no switching So for instance leaving out one box for DAY and one for NI
24. ip undbba be pue phases puc EUR eae ap De uid 64 2 62 SAVING Elite 65 2 6 1 Dialling analysis Ep 65 2 6 2 Routes providers ege pete bn ee ined 66 2 6 3 Dialling analysis mask eee tere e rtp eer eo Dp oon ke uve kee ead 67 ZENPNCIOl s E 68 2 7 1 Designatine MeS EP 68 2 1 2 Switches Broadcast Tape Recorder eee eese nies ste nhan tastes aaa aen aea ad 69 2 7 3 lioe iu c M 70 2 7 4 Switching o ri EP EN 70 2 7 5 iei iclinFirte E O 71 2 8 NU belli ss ciem Eee 73 2 8 1 Internal WES DR 73 2 8 2 BELVICES M M 73 2 8 3 DID for the tinging t ble rr d ao ee ee reo tee pedo eov a Reda 73 2 9 Operating parameters sssssssssssssssssseeeeeeeeeeen nennen nennen sss e innen rennen sss 73 2 9 1 Tintemall Mc ME 73 2 0 2 lourd S 74 2 10 Mobility EXITGFISIODI aues enn e nen RR XN SR RSS SESERRR ERR NR RN NREERRRE SAN YRRANURERRR ERAN RR ERAN NRRRR RR RA VNS ae 75 2 10 1 Mobility Extension IN nein eerte Ee REPE Pe eei EP niin e Ee e Pe PE ERE Pies 75 2 10 2 Mobility Extension OUT aee bee entente petita bae dp er pee de nnb Y Ep uL eve eia a Fog TI 2 10 3 Mobility Extension set VICES eee teer pede poner deve rte eo ENT qp e enean equae 79 2A1 GLUP ROUINO EEUU 80 211 1 CLIP Routing Set ng iom ede eee rei ie eene ae aN ak SeA aa Ena Aiens 80 2 12 Short
25. is changed to the call mode If it is activated the expiring of the period and end of the dialling is announced by a short beep Any other dialling is considered a service into the call User s manual configuration instrument 56 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 5 3 GSM Services Set the GSM ports for which the GSM CLIP function is to be enabled GSM services Line GSM service enabled CLIP In CLIP Out e CLIP In enter the expected incoming GSM identification format e CLIP Out enter the expected outgoing GSM identification format These services are rendered by some GSM providers only User s manual configuration instrument 57 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE 2 5 4 Trunks rons mum rows mme rows Sol Sol GSM2 SolL1 oil v Cyclic Cyclic J Cyclic J Cyclic Cyclic The table serves for allocating individual external lines to a bundle The maximum number of external lines in the bundle is 24 There are 16 bundles Every external line may be in one or more bundles at once The first eight bundles can use the service Internal call through a bundle A cyclic start up for an external line can be used in the bundle 2 5 5 Trunks for accessing ringing The table serves to allocate individual external lines to a bundle for using the service accessing ringing from a bundle Every exte
26. make waiting more pleasant MusicOnHold It is not recommended to make changes to the system voices User voices They are for notifying the caller in DISA Yoice Messages SYSO1_EN way DON T CONFIRM SYS02 EN wav Gave SYS 3 EN wav SYSO04 EN wav m EXPENSIVE SYSO5_EN way FORWARD SYSO6_EN way SYSO _EN wav SYSO8 EN wav SYS0S8 EN wav SY510 EN wav DISA1 ENG WAW After reading the DAT from the PBX this table will display a list of the voices contained in the PBX Pressing the key Load saves the voices in the Wav directory which are then automatically formed in the root directory of the installed PBX s configuration tool If you are going to make changes in the voices settings it is necessary to first put the voice in this Wav directory and then set it here A voice is a type of wav and must have the following parameters MONO 8bit 8kHz unsigned The overall capacity of the voices is ca 3 minutes The length of the system voices including the music is ca 40 sec User s manual configuration instrument 23 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Mess The name of the voice as it is herein presented in the PBX configuration tool e g as a DISA parameter in the ringing table File The name of the voice as it is saved in the PBX A change to the original voice press the key Load enter the voice created into the Wav director
27. name e CLIR selection a choice of sending identification by operator hide number show number e Prefix a 4 digit prefix which is automatically chosen as the first DID through a superior PBX after engaging a line The prefix is not recorded in the charging row e Min time for accounting the period deducted from the call time for temporary charging e Priority an internal line must have higher or the same priority so that it can use this external line e PIN a four digit code for accessing SIM cards GSM linka UMTS Digital line types Line Name Options Serie PIN GSM gateway Private without autoriz Min time for accounting s E ex Roaming enabled V Receive SMS MV Send SMS SMS after no answered call SMS after accepted call Network selection CLIR selection Belong operator Y Automatic Prefix C UMTS Nes C UMTS GSM Priority fo C GSM UMTS C GSM SMS at No Answer Missed call from n e ls Mobility Extension SMS after accepted call You have called with Zn e Zls Mobility Extension Sol GSM1 UMTS GSM2 GSM3 VoIP This setting is for voice parametres GSM UMTS module to use it for common calling If you want to use also UMTS DATA internet connection you have to set it in the web interface of the VoIP module Use your web browser to connect into the the VoIP module In the Network Data connection item enter parametres which you get
28. number of the dialling text number Separation may be done using semicolon csv tabulator odt or fixed length odx click on Save to save the abbreviated dialling Abbreviated dialling Import The abbreviated diallings are always imported into the active window Common abbreviated dialling Private abbreviated dialling You may also import them crossways for example Private abbreviated dialling into Common abbreviated dialling and the other way round Of course it must be taken into account that there could be max 112 Private abbreviated dialling and 200 Common in the desired section Private Common abbreviated dialling choose command Import in the Menu Data choose the desired file as a first option are offered those files which belong to the give folder ShortL private ShotCom common rest of the files may be found according to the name and extension Oteviit 20x Oblast hled n Pra Shot ee ShortL12 csv ShortL13 csv new rec souboru Soubory typu I separator csv Storno User s manual configuration instrument 87 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Otev t 20x Dblast hled n E Pra Shot e Ee ShortCom csv ShortL11 csv ShortL12 csv ShortL13 csv souboru Soubory typu Te odd leny st edn kem cs Storno after clicking Open the abbreviated dialling is importe
29. ringtone if an incoming call is from a number in the fast dialling of the given system telephone User s manual configuration instrument 43 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE Back call the type of ringtone from a line that was blocked by the person being called using the waiting for free line service Special call User s manual configuration instrument 44 www 2n cz 2 3 2 Description of the buttons All of the descriptions of the buttons can be formed and then printed out in the environment PBX configuration tool system lines buttons prints After filling in the functions of the individual buttons in MENU PBX configuration tool system lines buttons buttons the descriptions are reset but in PBX configuration tool system lines buttons prints it is possible to edit them The number of letters in a text for individual buttons is given by the width of the individual letters used sju Seas dnes Jas 3990011015 Print v Preview Print foil u 2 Jia Ju J User s manual configuration instrument 45 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE For a print preview of the descriptions allow the printing of the individual groups of buttons and press preview BEB i gt n SS Be Cosel COMM SHORTS To Print the descriptions allow the printing of the individual groups of buttons and press Prin
30. to do so then first select the tone source and then the cadence Music to make waiting more pleasant Defines the source of music used during both internal and external waiting Other types of tones are only used for special applications User s manual configuration instrument 71 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE The voice at the start of redirecting is used at the start of being redirected to the VTS The voice when exceeding the call period during redirection is used as a notification that the call must end during redirecting however at this moment it is possible to extend the call by 1 10 minutes before the voice gives the notification again by selecting DTMF 1 10 and selecting the call period Examples of voice The voice at the start of the redirecting Your call will be redirected The voice when exceeding the call period during redirection You have a limited time for this call through a tone selection you can extend the call by one to ten minutes otherwise your call will be ended DISA tone The tone that is used when calling DISA if a voice is not played to the caller Attention If you want to use modem detection on an external line where the DISA is activated without a voice then you are not allowed to use a continuous dialling tone These voices they are not recorded as standard User s manual configuration instrument 72 www 2n cz 2N OMEGA Lite
31. will only go through its module for GSM telephony and it won t contain the neighbour s It is also possible for the director to have both 3 and 4 ticked for the dialling analysis mask on his lines which for an outgoing call to GSM EuroTel broadens the opportunity of entering both modules for GSM telephony And why not when the PBX can charge these calls separately for internal subscribers Example 2 With the help of the LCR the PBX can save not only money but also time Imagine a certain department of people that are allowed to call an external network for work on numbers DID that are often repeated The DID of the affiliated branches will be entered in the LCR s Route Analysis rows and these calls will have the route with the largest available amount of external lines in the bundle or bundles If we set the internal lines of this department so that for a normal outgoing call not through the LCR then they will only have one bundle that doesn t have many external lines and they have the Use LCR ticked then the frequently dialled numbers of the affiliated firms are easily called through a well sized bundle in the routes of the LCR but for unknown DIDs it will be more difficult as only a very limited number of external lines will be available for this call User s manual configuration instrument 67 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Example 3 Other authorisation If an internal line was set to Oblig
32. 6 according to the modem type select the CO dialling type confirm the settings by pressing OK zip xi Local connection Modem Confirmation Part coma v Baudrate seo x Initializaton string ATXSVIEILIM3W2 V Use prefix Prefix oO Tone C Pulse J OK X Cancel 11 Press the bar button CONNECT TO PBX three OMEGA LITE symbols in a sequence 12 Click using your mouse on the YYMM XXXXX PBX file which is used for remote supervision 13 Press the CONNECT MODEM AUTO button 14 Select the technician responsible for remote supervision confirm the access password or select a new technician by pressing the NEW button and quit the dialog window by clicking on OK 15 Click on the telephone number used for remote supervision including DISA number if DISA if used and press the DIAL button this dialog window is not displayed if there is only one telephone number User s manual configuration instrument 96 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 16 Now the connection is being established 17 If everything is OK the following information will be displayed gradually establishing connection connection established remote supervision password confirmed 18 The following data are displayed on the bottom bar from the left to the right connection type MOD time of the PBX to be supervised activity is indicated by a pulsating target pro
33. C Immediately Immediately Never Never After 1 ei s C After 1 s Days Hours Minutes Record validity Permanent F o m o Outgoing ringing of CO line for Auto CLIP routing User s manual configuration instrument 80 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE Set the following Save latest records only the CallBack database only includes the last most recent calls to the selected PSTN number If this number was called by multiple subscriber lines then the last calling station is only saved and the CallBack is routed to this station Save also answered calls the CallBack database also includes answered calls to the PSTN Erase after answered incoming call the record is deleted from the CallBack database if a call coming from the record line is answered Any subsequent call is then governed by the ringing table for the given port To define how long a record should be saved in the CallBack database use the Record validity item Set the following Permanent the record is deleted not on a temporary basis but as defined above Days Hours Minutes the record is deleted as selected The maximum record time is 45Days 12Hours 15Minutes The CO line Outgoing Call duration the minimal CO line outgoing call duration including ringing needed the call to be counted as a realized successful from the point of view of the Auto CLIP Routing function Long
34. GHT only ensures one cycle of automatic switching during one day Ticking the box Automatic gives automatic switching at the requisite times The selection State in which the choice of either DAY or NIGHT is entered ensures the PBX is started in the given regime if automatic switching is not used The choice Change to summer time ensures that the PBX automatically switches over to summer or daylight saving time 2 7 5 Global data Groups Global data Group 1 Written ciffers count Announcement tone 16_ Gener sine 1 OzT PERMANENT Forwarding Message FORWARD Y Call timeout message PASSWORD v Group 2 Written ciffers count Announcement tone TE Gener sine1 gt OZT_PERMANENT gt Forwarding Message FORWARD v Call timeout message PasswoRD v Pleasant waiting tone Music Permanent tone DISA tone Gener sine 2 7 OzT PERMANENT The choice Number of registered figures determines how many numbers are entered into the charging rows of work calls Only the first five numbers of private calls are automatically displayed thus this choice has no effect on them unless it is not set otherwise in the Global data charging The choice Dialling tone enables the type of dialling tome to be selected from the constant type and the Morse type and the type for calling to a state line The other types of tones are only for special applications As a rule it is not necessary to make changes If you wish
35. IKACE is engaged then because the subscriber has the LCR set as obligatory they hear the engaged tone and will have to call later User s manual configuration instrument 31 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 2 2 3 Mask for dialling analysis Internal lines Mask for dial analysis Mask of dial analysis sel This serves to set up one to four levels of saving for individual internal lines after the service Dialling to the VTS Details in chapter LCR Level of Saving 2 2 3 Permitting services In this table it is possible to allow or disallow each internal line an individual service In group C it is possible to set three types of levels connection level for connecting to a call default service to call 0 A line that is at a lower or equal level can be connected to The level has values from 0 15 The default level is 0 no one can call anybody call level for calling between internal lines A line that is at a lower or equal level can be called The level has values from 0 15 The default level is 0 everybody can call everyone the level in the department determines the ranking of lines to the departments The lines to the departments are ranked from the highest levels to the lowest This service is only tied in to automatic logging in to the department using the DSS key on the system phone If the department is created by hand using the PBX c
36. LEKOMUNIKACE or until the incoming ringing from an external line Number of voice from Stops previous ringing to internal lines and DISA 1 to 1020 takes an external line to wait for a fax or Or nothing modem call or DTMF number DISA End None Ends dialling detection Voice dise ian Plays the voice After lifting an external line with the DISA Select tone A selection of tones service activated a different tone can be imposed for special applications Table Number of ringing table Ringing tables can be catenated Automatic Automatic operator s Rings a given automatic operator voice operator hurnbsr 0 8 system If module not working then it carries on with next row in table Connect remote Rings the remote access modem in the PBX ACCES None If the module is not installed then it carries on with next row in table Carries out a start up on the bundle for outgoing lines to the VTS by parameter This Transit DID MESES ere Es an outgoing call to be made from virtual within the PBX on the line account given by the parameter Call fast dialling The number or name of the joint fast dialling After an incoming external call it dials the given fast dialling Which line the call will be charged to and which lines it will go to the VTS is determined in the settings External lines Identification for transit calls Hangs up on an external line and ends all Hang up None actions It is in the last row
37. TELEKOMUNIKACE 2 1 5 Internal lines e Pulse The digit replacing the tone hash on pulse telephones e Pulse The digit replacing the tone asterisk on pulse telephones e Time for 1 dialling Defines the maximum time waiting for the first number to be dialled after phone is picked up The line gets the engaged tone after this time period has elapsed e Time for further dialling Defines the maximum time spent waiting for the next number to be dialled from an internal line After it has lapsed the engaged tone is heard and the call is cancelled e Crossing Time to failure loop Defines the time period before the engaged tone is sent following unsuccessful dialling After the line goes to a fault loop e Bad dial key protection The time period for which the next digit dialled is ignored after dialling the entire number It serves to prevent inadvertent call back after unsuccessful dialling e Switching on lock The time the intercom lock is fastened e Regime supervisor is valid The time period for which the supervisor services can be called upon after logging in to the Supervisor service e Ticking after attach The time for which a ticking can be heard on the call after connecting After this period the service cannot be disconnected from the call e Back to forwarder The time the PBX tries to get a connection after reconnecting with a hung up line After this time it carries on in getting a connection but it also starts ringing
38. User password to be changed All parameters are available for reading The user can change the following parameters Authorisation numbers Emergency numbers Bank holidays The name of the VL Internal priority lines Authorisation without ARS Allowing services all Divisions Classification into groups and divisions Calling to the entire division FLASH and the type of choices for VL Allowing direct choice for bundles Operating parameters for internal and external lines Buttons for system telephones External lines name and type of choice Bundles for ring retrieval Assigning ringing tables into the ringing table for external lines Labelling lines Switchover times Global group data dialling tone softening tone DISA tone Quick dialling joint and personal User s manual configuration instrument 7 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE The standard password setting for both users is 1111 Without the password the PBX cannot be programmed Please remember the password User s manual configuration instrument 8 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 1 Global data 2 1 1 Information This item informs you on the construction of the PBX that you are programming Here you will find the number of the SW version in the PBX the production number of the PBX to which you are connected th
39. X is in the DAY mode The setup parameters are Never Immediately after 1 9 rings Warning If you select Immediately and the outgoing calls are made via GSM gateway it will take approximately 10 seconds before the external telephone starts ringing because of the connection method within the GSM network Call at night whether outgoing Mobility Extension should be activated or not if the PBX is in the NIGHT mode The setup parameters are Never Immediately after 1 9 rings Warning If you select Immediately and the outgoing calls are made via GSM gateway it will take approximately 10 seconds before the external telephone starts ringing because of the connection method within the GSM network Call Type enter over which bundle of external lines the respective outgoing Mobility Extension should be made Selected can be only those bundles that do not include analogue external lines Wait for trunk whether the system should wait until the busy line in the respective bundle has been released or not If all lines in the respective bundle are busy and Waiting for bundle is allowed the system waits until the external line in the bundle is released Otherwise the outgoing call is not made Send SMS The SMS will will not be sent After accepted ME call Called party answers the call on the ME stati M call is established Answered ME Called party does not answer the call on the ME statin kut the call was answered on the ralted ext
40. YMM XXXXX ACC the billing data calls are displayed in the window PBX diagnostics when accounting and diagnostic lines have been read from the file YYMM XXXXX DIA the diagnostic data log system lines are displayed in the window User s manual configuration instrument 93 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE z Connect to PBX the window with a directory tree for selecting a file to establish connection with the PBX to be supervised Es Disconnect modem connection disconnects from the supervised PBX keeping the selection of the PBX in OMEGA LITE Program Recover modem connection recovers connection with the selected PBX upon Disconnect modem connection Cancel connection with PBX cancels connection with the supervised PBX and selection of the PBX in OMEGA LITE Program Set communication displays the window for communication and connected modem parameter setting Download billing and diagnostic lines downloads call billing and log system line DATA Trace downloads tracing lines from ISDN e Download data from PBX downloads the configuration of the PBX to be supervised eal Save data into PBX saves the configuration of the PBX to be supervised User s manual configuration instrument 94 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 14 5 Types of Establishing Connection It is possible to establish conne
41. against silence starting from tone silence 1 1 ms CPT detection threshold behind filter minimum tone level 0 255 for the tone to be considered present 2 1 7 Parameters for voicemail Voicemail a line or department to which the modem of a voice system is connected Audio lines Kerio VoiceMail and the ITS voice system lines Identification of mailbox selection prefix before the identification sign the default setting is a pause of 1s DTMF for call clear return from being put through called subscriber is engaged Increasing of DTMF resistant for VMail Min length of the DTMF sign that is accepted in VoiceMail Use protocol ITS permission prohibition for the voice mail ITS Use protocol 602 permission prohibition for the voice mail SW602 2 1 8 Authorisation numbers Tables A B C D E F for programming authorisations Tables A B C D are prohibitive and conversely tables E and F are for exemptions and have greater priority Every table has 16 rows Local numbers up to 5 digits can be entered into tables A and B the rest take ten digits Apart from the numbers it is also possible to add the sign which presents all numbers 0 9 User s manual configuration instrument 18 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE Authorization tables 00421 User s manual configuration instrument 19 www 2n cz 2N
42. atory use of LCR then the numbers of frequently phoned business partners could be entered into it Then an internal subscriber calls these DIDs through the LCR route but they cannot call to other numbers in the public network because if a chosen number is not found in the LCR table that is obligatory for the subscriber then the subscriber gets the engaged tone 2 7 Groups 2 7 1 Designating lines Groups Priminent lines Group 1 Operator FAX Modem Day Night viii 12 x f 11 Group 2 perator FAX Modem Day Night EM mo It is possible to split subscribers into two groups on the PBX For each main group it is possible to define the following privileged subscribers e Day the number of the subscriber working as the operator for the DAY regime e Night the number of the subscriber working as the operator for the NIGHT regime e Fax the number of the subscriber where there is a fax for a group e Modem the number of the subscriber where there is a modem for a group User s manual configuration instrument 68 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 7 2 Switches Broadcast Tape Recorder Groups Relays Group 1 Temporary Permanent Broadcast Tape recorder Relay Relay2 Group 1 Group 2 Group 2 Temporary Permanent Broadcast Tape recorder Y v Y Enter the port relay for Activate temp
43. ave ringing from external lines accessible Example 4 During an incoming call it rings group 3 cyclically Accessible lines don t ring If after 60 secs no one answers it ends on the voice mail of subscriber 11 Action Parameter Call accessible lines Call VL 13 Call VL 14 Call VL 15 Call VL 16 Wait 0 Tab 1 Action Parameter Call accessible lines Call VL 12 Wait 10 Don t call 12 Call VL 14 Wait 5 Call VL 13 Call VL 15 Wait 0 Tab 2 Action Parameter Call accessible lines Call dept linearly 5 Wait 0 Tab 3 Action Parameter Call dept cyclic 3 Wait 60 Don t call Call voicemail 11 Wait 0 Tab 4 User s manual configuration instrument www 2n cz 62 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE Example 5 During an incoming call after 4 Action Parameter secs the external line is picked up it waits for Wait 4 the DISA or fax dial tone with the voice signal DISA 1 number 1 After it subsides it waits another 6 Wait 6 secs and if the DID does not come then it rings DISA End for 20 secs on lines 12 and 13 Afterwards it Call VL 12 forwards the call to the operator and if no one Call VL 13 takes the call after 30 secs i
44. back to the switcher e Back to operator If the target user does not pick up the phone in this period the ringing goes back to the operator e End of switching over After this period the PBX considers the call as dead The caller is told this by a voice telling them that all lines are unavailable and the call is cancelled e Ringing of holding CO The time between being notified by tinkling on an internal line that an external call is on hold e End of holding The time limit for a temporarily held external line to be hung up e Time of back ringing The time call back lasts for e Length of alarm ringing The time the alarm will ring after activating it on an internal line e Delay from front The time when a new incoming call is not accepted after having been hung up e Increasing of DTMF resistant for DISA Min length of the DTMF sign that is accepted in the DISA direct inward calling Increasing of DTMF resistant for VMail Min length of the DTMF sign that is accepted in VoiceMail e Trace key system phone L2 enable writing of key system phone layer 2 events into LogSystem listings To read the data push the dollar button on the main bar of the configuration tool while reading accounting data for example e Trace key system phone ringing enable writing of key system phone ringing into LogSystem listings To read the data push the dollar button on the main bar of the configuration tool while reading accounting data
45. because faxes can t be sent through GSM it is necessary to prevent this This can be done for instance such that the fax line will have a different dialling analysis mask ticked than the row with the number of the Brno branch which alternates the connection through GSM Thus we achieve a state in which the fax line cannot find a cheaper exit for the Brno branch and returns from the LCR to make the connection through the standard public network 2 6 3 Dialling analysis mask This serves to limit combing through all the rows when calling with the LCR The Route Analysis row will only be searched through if the dialling analysis mask is also ticked for an internal line that is seeking a cheaper route Example 1 Two modules for GSM telephony with the operator EuroTel are installed in the PBX One belongs to one firm the other to another In the Route Analysis table one row will be entered with the number 602 aiming at bundle 5 the first module for GSM telephony and for example the dialling analysis mask has 3 ticked Another row will also have the number 0602 entered but be directed to bundle 6 the other module for GSM telephony and the mask will have 4 Afterwards the internal subscribers of the first firm must have mask number three ticked and they are not allowed to tick mask 4 In contrast subscribers in the other firm must have the number 4 ticked in the dialling analysis mask and are not allowed to tick 3 This ensures that each firm
46. break up The maximum time for a call of two external lines that do not have connected break up signalling e Trace ISDN The selection allows the type of diagnostics for the ISDN modules to be set after restarting the PBX e ISDN blocking time after extern busy The time for which the ISDN line is not accessible after a previous occupancy by external equipment e g by an ISDN modem User s manual configuration instrument 13 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE e Don t disintegrate conference Allowing no collapse for conferencing between an internal line and at least two external lines after the internal line has hung up External lines Global data Minimum ring time Minimum quiet for ring end ms Pause length for dial CO ms Flash length to CO ms Dial pulse to CO ms Dial gap to CO ms Gap between numbers PY ms DTMF dial length ms Waiting for CPT CD ms DTMF dial CO translation ms Test repetition CO s CO Out Relax ms CO In Relax ms E End of waiting DISA FAX madem s 1 dial to CO time s Dial to CO time s a Dial to GSM time s h m Max call ime without break up s x0 H Max call time with break up s 300 Trace ISDN Notwace e ISDN blocking time afterextem busy s p 4 Don t disintegrate conference r rj User s manual configuration instrument 14 www 2n cz 2N OMEGA Lite Configuration instrument
47. ction with an 2N OMEGA Lite PBX to be supervised e automatically or e manually 2 14 6 AUTOMATIC CONNECTION Settings of PBX To Be Supervised Automatic connection can be used for a PBX provided that a DDI to the ISDN line ringing chart is reserved for remote supervision an ISDN MSN line is reserved for remote supervision a CO line is reserved for remote supervision the DISA to the ringing chart is used the modem connection detection is enabled in DISA fad adi Dae Example of ringing chart set up for types 1 3 Interconnect remote supervision Ring to operator die Wait 0 Hang up Example of ringing chart set up for types 4 5 DISA T Wait 6 DISA END Ring to operator oe Wait 0 Hang up Note With remote supervision type 5 you have to set the GLOBAL DATA MODEM Modem switch to remote supervision in the programming tool The DISA tone may not be dialtone permanently User s manual configuration instrument 95 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE Establishing Connection 9 Run the OMEGA Lite Program SW 10 Press the bar button SET COMMUNICATION tools symbol and check and set the modem parameters set the COM port connected to the modem select the communication rate according to the modem capacities select the use of PREFIX of the master PBX set the modem connecting tone transmission or up arrow symbol above digit
48. cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE 2 2 4 Departments These tables are used during the Call Department service In all there are 8 tables with 56 fields available 2 2 5 Allocating to a group and a department The table serves to allocate individual internal subscribers to one of two groups for the purpose of switching from the DAY and NIGHT regimes One subscriber cannot be in more than one group At the same time this is where individual internal subscribers are allocated to one of eight departments for sorting ringing One subscriber can be in more than one department simultaneously 2 2 6 Calling to a department If an internal line is using the call a department service then the call either only starts on the first free internal line or at the entire department depending on which group the line belongs to and whether the given department has checked the parameter Call to the entire department 2 2 7 Global data See Global data internal lines 2 2 8 FLASH settings and the type of dialling Internal lines Flash setup Minimum flash length Maximum flash length Ukon eni Flash Line ms Pulse dial Pulse dial Pulse dial Pulse dial The table is used for setting the minimum and maximum length of the FLASH on the analogue internal lines FLASH detection is carried out by windows A FLASH signal is only considered to be a disruption to the current by the subscriber lo
49. d 2 13 3 Errors during Abbreviated dialling Import If a file with abbreviated dialling records is not correctly created or contains Range error You try to write data out of range storing positions Continue will ignore data out of range Continue E Storno higher number of records a note is displayed this note means that the file contains higher number of records then it is possible to write in the assigned memory space This can happen if you try to Import Common abbreviated dialling into memory space reserved for Private abbreviated dialling User s manual configuration instrument 88 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Format error x Text error You try to write text longer than 16 chars Continue will set length to 16 chars Continue in the file in column Text is used more than 16 chars which is the max possible value Format error Eg DTMF error You try to fill disabled chars You can use only 0123456789 ABCD TPF 2 Interrupt in the file in column Number is used not allowed char Allowed chars are only 0123456789 ABCD FPT 2 13 4 Creating of Abbreviated dialling file Abbreviated dialling files have following format and separator semicolon extension scv tabulator extension odt fixed length extension odx User s manual configuration instrument 89 www 2n cz 2N OMEGA Lite Configurati
50. duction number of the PBX to be supervised YYMM XXXXX connected 11 Go on as if you used a serial link User s manual configuration instrument 97 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE 2 14 7 MANUAL CONNECTION Setting of PBX To Be Supervised Manual connection is used if 1 No automatic connection can be made Example of ringing chart set up Ring to allowed Ring to operator E Wait 0 Hang up Establishing Connection Run the OMEGA Lite Program SW Press the bar button SET COMMUNICATION tools symbol and check and set the modem parameters set the COM port connected to the modem select the communication rate according to the modem capacities select the use of PREFIX of the master PBX set the modem connecting tone transmission or up arrow symbol above digit 6 according to the modem type select the CO dialling type confirm the settings by pressing OK 3 Press the bar button CONNECT TO PBX three OMEGA LITE symbols in a sequence 4 Click using your mouse on the YYMM XXXXX PBX file which is to be used for remote supervision 5 Press the CONNECT MODEM MANUAL button 6 Select the technician responsible for remote supervision confirm the access password or select a new technician by pressing the NEW button and quit the dialog window by clicking on OK 7 Dial the telephone number to be used for remote supervision on the telephone set c
51. dule None of the numbers have to be added or subtracted as the code 0603 is still in the memory nowhere was called it was only used for decoding to allocate the route and after being picked up the port in bundle 5 calls to it The next number dialled by the internal subscriber is automatically filled in thus achieving cheap calls to a mobile phone from an internal subscriber though the GSM module Example 2 Our PBX is in Prague If for instance the outgoing call starts 05 333666 which is the number of the firm s branch in Brno which also has the module for GSM User s manual configuration instrument 66 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE telephony we can determine that this Brno number uses of instance route 1 which also goes through a GSM module and totally replaces the number dialled with the GSM number of your branch Here it is predetermined that the number uses route 1 Bundle 5 an external line with the GSM telephony module also uses this but here it is necessary to take away all 8 numbers in the box Subtract the number 8 is entered and replace them with for example the number 0603234567 this number will be entered in the column Add because this number is the number of the module for the GSM telephony of your Brno branch This again gives a cheaper connection from Prague to Brno than through the land line network Example 3 Imagine that the fax line also uses the LCR but
52. e time for which access to the PBX by remote control is allowed and a precise labelling of the PBX firmware saved in the RAM and FLASH memory This labelling is in accord with the file name used to upgrade the firmware in the PBX Information PBX 2N OMEGA Lite Version 4 07 Revision 01 Serial No 0609 50000 RA Validity 256 Board No 07 0201 0035 SW valid Not limited GSM Last license Last license ME valid Last license ME count 2 RAM V4 0 7EN Lite 20091222 1811 Beta Rev 1 bin FLASH V4 0 7EN Lite 20091222 1811 Beta Rev 1 bin Linky IL S SYS 4 FW Language Men T 22 co 1 Language 1 Dre cz GSM 2 Language 2 Hu ISDN 2 onis VoIP 8 Language E tr AUDIO 2 Language 4 Men RELAY 4 Last update User Supervisor 28 12 2009 13 33 28 Information about licences RA Validity expiring period for remote control with integrated modem to PBX according to main board type SW valid SW validity expiring period it is possible to make only emergency calls after expiring of this period User s manual configuration instrument 9 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE ME valid licence expiring period of Mobility Extension service ME count maximum count of Mobility Extension service users default users count 2 without validity limitation GSM validity displays the time before licence expiry for call blocking from GSM modules bl
53. ed as ringing e Minimum quiet for ring end It is the pause in the ringing from an external line after which the ringing from an external line is considered finished e Pause length for dial CO Enables a pause to be entered between the numbers dialled Used in complementary numbers after quick dialling and after detecting routes User s manual configuration instrument 12 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE e FLASH length to CO Enter the length of the FLASH signal generated by the PBX to the external port e Dial pulse to CO Enter the length of the dial pulse s impulse to the external port e Dial gap to CO Serves to set the gap length for pulse dialling to an external port e Gap between numbers PV Serves to assign the gap length for pulse dialling sent to an external pulse e DTMF dial length Serves to assign the length of broadcasting the dual tone multi frequency DTMF dialling to an external port This value also determines the DTMF dialling pause e Waiting for a CPT CO Determines the maximum period the PBX spends trying to detect the external dialling tone used to determine the working of the external port e DTMF dial CO translation The dialling gap for an internal tonal line to an external tonal line after which the dialling to the external line is only heard e Test Repetition CO How much a faulty external line test is repeated e CO OUT Relax The minimum time for sus
54. em telephones OMEGA FCI no longer made OMEGA LH and a digital system telephone 2N StarPoint 500 up to 5 types supplied can be connected If you want to assign one of the functions HandsFree Transfer Mute to a programmable button a direct call to an internal line or direct access to an external line then first left click the mouse on the programmable button that you want to set chon a Common short cial Select Type Line direct access to external and internal lines Function the basic function for controlling a system telephone HF MUTE TRF CANCEL User s manual configuration instrument 37 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Service services e g switching from DAY NIGHT logging in to a department allowing Mobility Extension Service Set alarm of line M Set alarm of Cancel alarm of line Block line Block department Set do not disturb to line Set do not disturb to department Cancel blockade of line Cancel blockade of department This is the procedure to set all of the programmable buttons as you wish If you right click with the mouse then you will see Sestava default Sestava reditel Sestava operator Sestava recepce Reset Copy to clipboard Paste from clipboard Export Import Default setting the programmable buttons original setting stable setting with regards to the individua
55. ension m User s manual configuration instrument 77 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Answered call Called party does not answer the call on any of his statins ME or certain extension SMS at No Answer The text is used for SMS if the called party does not answer the call the missed call text is common with text for all outgoing calls thru internal GSM gateway SMS after accepted call The text is used for SMS if the called answers the call the established call text is common with text for all outgoing calls thru internal GSM gateway N Calling party number C Calling party name User s manual configuration instrument 78 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 10 3 Mobility Extension services These services are executed based on a command from Mobility Extension After detecting the DTMF characters entered on the end of the external telephone number this service is simulated in the PBX Mobility Extension Services Service FLASH c Double FL4SH Hang up st i Password repeat count Here enter FLASH DTMF characters after which FLASH a short line interruption is to be generated in the call in order to be able to transfer the call or dial another service Double FLASH DTMF characters after which FLASH FLASH a short line interruption twice after each other is to be generated
56. ent as with physical lines User s manual configuration instrument 48 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 5 External lines 2 5 1 Types of lines CO line type Options c01 co line Serie Prefix V 16kHz Dial Tone DTMF 7 BE Announcement tone length ms 330 m Without authoriz Time to dial startup ms 300 m Priorit o Test CPT Min time for accounting s 5 ES i v Current test External 1 In this table the properties of the individual lines for the analogue external lines is set up Analogue external line e Name a maximum 14 character name for the external line e Series only an incoming external line which has not been tested for correct working and cannot be entered upon in the outgoing direction 16 kHz an external line with a 16 kHz impulse receiver Private a line connected to a private network which is not charged Without authorisation on this line a check of authorisation is not made Test CPT A test for the dialling tone on the external line Current test The other option is to test the line current when answering Prefix a 4 digit prefix which is automatically chosen as the first DID through a superior PBX after engaging a line The prefix is not recorded in the charging row Dialling setting the type of dialling for an external line Announcement tone length determines how long it must detect an external dial
57. er calls would be saved to the Auto CLIP Routing call history only if Save even realized calls has been selected To add a CallBack ringing to a subscriber line according to the available ringing table use the Add ringing table item Set the following Immediately the ringing table is added together with the CallBack ringing to the subscriber line Never the ringing table is not applied n the ringing table is added in a certain number of seconds 1 254 If older records are saved too regarding multiple PSTN calling subscriber lines then enable the Add ringing to another subscriber line option Ringing is routed to the latest record first and only then older records are added as preset Set the following mmediately ringing to an earlier record is added together with the CallBack ringing to the subscriber line that created the later record Never no ringing to an earlier record is applied In ringing to an earlier record is added to the subscriber line that created the later record in a selected number of seconds 1 254 User s manual configuration instrument 81 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE The ringing adding options can be combined Add ringing to another subscriber line is applied first followed by Add ringing table User s manual configuration instrument 82 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 12 S
58. ernal subscribers in the authorisation table It is possible to take away 14 numbers at most and the number of automatically prearranged numbers is not allowed to exceed 30 The symbol T means crossing over to tone dialling a comma means a delay in dialling and W means switching to tone dialling and waiting for log in possible for ISDN int GSM or analogue external lines with a tariff impulse E amp M if a log on does not come then it carries on with the DTMF dialling after the set time For each route if ISDN lines are used in the outgoing bundle then it is possible to assign identification using the MSN numbers identically as when setting the services and private MSN numbers for the internal lines It is particularly beneficial to use this for outgoing calls to private circuits Track Mo Tu We Th Fr Sa Su HoFrom Hour Min To Hour Min PSTN trunk Remove dd errrrrrr spi sp Ee sda 1 rerrrrrr fo sz ss sz mwo jo feo z wwi zr vm BEHENENNSNE o zo f sio a z Jo z vsu 1 zr vm 3 rFrrrrrrr f s s s Hl f0 v usui r vw zl 024 50 74 75 99 100 124 125 149 Example 1 How to learn that during outgoing calls to a number starting with 0603 route 0 is used which goes through the PBX s GSM module of the operator Paegas The dialling to the Paegas mobile network given above has a predetermined route 0 This for instance is allocated to bundle 5 in which there is the external line with the GSM mo
59. from your UMTS provider User s manual configuration instrument 53 www 2n cz 2N PBX VoIP module Data connection Data connection Connection provider name Dial number optional APN access point initial AT commands optional PPP usemame optional PPP password optional Dascripoon Data connection enabling of the function Connection provider name Informative name e g provider name Dial number optional data access optional made by system APN access point login to the provider parameter requested by provider Initial AT commands optional not necessary PPP username optional username for connection to the provider parameter requested by provider not always PPP password optional password for connection to the provider parameter requested by provider not always Description Informative item Accept settings by clicking at Modify item Icon paper with pen Example setting of the VoIP module User s manual configuration instrument 54 2N PBX VoIP module TELECOMMUNIC RATIONS Data connection Doto connection Commecton provider name Dial number optional APN access point Initial AT commands optional PPP usemame optional PPP password optonal Description You can check successfull connection in menu Network Main configuration In case of successfull connection you can see there IP of the provide
60. he MENU bar when the headset is connected Automatic answer enabled when activated by the button on the system telephone it enables automatic answering using the loud telephone during an incoming call 2 4 Virtual lines 2 4 1 Numbering the virtual lines This item contains a list of the PBX s virtual lines The virtual line is an extension that does not exist physically On its account the authorisation ARS and other parameters can be set for an outgoing call A subscriber number is allocated to individual ports and can be up to four digits with a four digit PIN used to identify a virtual line Attention a collision with the numbering of the other lines and services must not arise By right clicking the mouse the ports can be automatically numbered User s manual configuration instrument 47 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Virtual ports numbers 2 4 2 Direct selection on the bundles allowed The same set up and intent as with physical lines 2 4 3 Tariff credit The same set up and intent as with physical lines 2 4 4 Authorisation The same set up and intent as with physical lines except that here only private authorisations can be set up It does not distinguish the DAY NIGHT regime 2 4 5 Allocating a bundle The same set up and intent as with physical lines except that here only allocating the bundle is set up 2 4 6 Mask for dialling analysis The same set up and int
61. hone number manually 2 14 12 Cancelling Connection To cancel the established connection press the bar button CANCEL MODEM CONNECTION WITH PBX cross in a red field By pressing this button you cancel the connection and selection of the PBX in the programming tool User s manual configuration instrument 100 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE The manufacturer reserves the right in contrast to the submitted documentation to make modifications to the product that will improve the product s properties Please use the product in accord with the instructions and for the purpose for which it was designed and manufactured After the product or its components have come to the end of their lifespan please dispose of them in accordance with the valid legal provisions for environmental protection User s manual configuration instrument 101 www 2n cz
62. hort Speed Dialling 2 12 1 Common Abbreviated Dialling You can enter up to 200 common abbreviated dialling options into the PBX Short dials common Not able for group 1 0 Peter 601222333 T Not able for group 2 Call T a m By pass authorization TR V Not able to delete Wait for trunk I Send SMS at no answer Notable for aroup 1 1 John 777888999 Not able for group 2 Call T T k5 By pass authorization ds om 7 Not able to delete Send SMS at no answer Free memory o24 2548 J 50 74 J 75 99 J 100 124 125 143 150 174 175188 65261 99x User s manual configuration instrument 83 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE 2 12 2 Private Abbreviated Dialling Key telephone users may enter additional 112 private dialling options that can be retrieved from the particular key telephone only User s manual configuration instrument 84 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE 2 13 Export Import of Abbreviated Dialling It is possible to Import Export the Abbreviated Dialling from to a file From an active window you may use Data Export Data Import in the Menu DATA Omega Program configuration cfg Abbreviated dialling Export Abbreviated dialling are exported always from the folder in which you currently are Common abbreviated dialling private abbreviated dialling 2 13 1 Common
63. ies on After every number called the selection is compared with the numbers in the Dialling Analysis table and at the same time the LCR level of the internal subscriber and the dialling analysis are compared If a route is found then a call is made along it If the route found is engaged or no alternative route is found at all or the level of the LCR is not in agreement then the call takes place along a standard external line with the announcement Attention please this call is more expensive Selecting the Obligatory LCR If this box is checked it means the same as in the previous example that after selecting the start up service to the VTS a simulated dialling tone is given and the number called is checked to see if it is not the same as a code in the Dialling Analysis table If a number is dialled that is not in the Route Analysis then a connection is made through a standard external link If agreement is found and the route is free then the call is made along this route In the event that the route is engaged the caller is not allowed to make the call and receives the engaged tone or an announcement that the connection failed The selection Mask for Dialling Analysis Level of Saving Here up to 4 levels of saving The individual rows in the Dialling Analysis also have 4 boxes for ticking the level of saving So that the internal subscriber can get to the Dialling Analysis they must have at least one box ticked for the level of saving in
64. in the call Not designed for direct use in the PBX Hang up DTMF characters after which in the case of transferring calls the transfer is made but the connection of the external telephone number with the external line is not terminated and it is possible to continue dialling calling VL calling VTS calling a service in the case of hesitating to dial time supervision of dialling the first and the next digit expires the subscriber hears a congestion tone the dialling tone is heard again and the PBX is ready for receiving dialling Password repeat count maximum number of attempts to enter the user password for the line if required User s manual configuration instrument 79 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 11 CLIP Routing CLIP Routing helps callers from the PSTN to call back the call establishing subscriber line in the PBX overriding the ring table rules for the port used 2 11 1 CLIP Routing Setting Set the parameters in the CLIP Routing Setup menu C3 Global data E3 Internal lines EJ System lines CJ virtual lines CJ External lines EJ Saving automat E Groups E3 Numbering 3 Working parameters E3 Mobility Extension VER CLIP Routing setup Pex COM E Auto CLIP routing ptions Save only the newest records Save even realized calls Erase after realized incoming call Add ringing of next internal extensior Add ringing table
65. internal that should have the Mobility Extension service sharing identical services with an external telephone number activated One internal line has one external telephone number allocated After being allocated in one of the menu lines offered according to the ME license inserted it will not be displayed in the following ones Name Name of the external telephone number enter the name without diacritics The name is shown on the display of the system telephone Number external telephone number Password personal password of the allocated internal line It is the same as the password set up in the nternal lines Operating parameters Blocking MENU If it is allowed to enter a password it is always necessary when calling from this external telephone number to enter the password first and then further dialling is possible The user is asked to enter the password with the following message Enter password Order of used common short dial after entering the Name and Number a new common quick dialling is established whose ordinal number is displayed Always the first free common quick dialling is offered Mobility Extension In Line Name Number Password Order of used common short dial 1 fis v Pet 603123456 Dyn o 2 fis gt Pavel 777987654 WYN p 3 User s manual configuration instrument 75 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE A common quick dialling established i
66. is 4 digits at most Pay attention that no collision with the numbering of services arises In the DDI column enter the DDI number used when phoning an internal line during DISA DDI if it is not set up otherwise in the ringing table Select the user language in the Language column to display the key system phone menus line names and personal quick dialling labels Select one of up to 4 languages as preset in the Global data Localisation menu The Prefix CLIP column represents the transition sign to the VTS for internal lines that identify an incoming call and for system telephones with at least 05 12 firmware It enables this equipment to accept call back directly from a list of rejected calls It can contain up to 4 characters The column Prefix CLIP private represents the transition sign to a private network an external line denoted as a private one for internal lines that identify an incoming call and for system telephones with at least 05 12 firmware It enables this equipment to accept call back directly from a list of rejected calls It can contain up to 4 characters User s manual configuration instrument 27 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Internal lines Port Type Number DDI Language Name Prefix CLIP Prefix CLIP private Ro fir Ben emer son RR Ben Reeve EN CNN 2 2 2 Access to external lines 2 2 2 1 Allocating external lines Trunks assigning Prior Trunk
67. ite Configuration instrument TELEKOMUNIKACE and 3 the directorate are assigned to bundle 2 The external lines 4 and 5 are in bundle 3 and the last external lines 6 7 and 8 are assigned to bundle 7 Afterwards for starting up an external line we can assign the internal links from the administrator s flat just to bundle 1 Like this no one else can get on this external link For the director assistant and fax we assign bundles 2 and 7 for starting up to the VTS Like this two calls can be made simultaneously from the directorate on the private lines and other calls faxing other external conference calls choose one of the free external lines from the last bundle 7 Similarly the traders lines can be chosen from bundles 3 and 7 for external calls The other employees can only use the last bundle 7 In this case bundle 7 not only serves the group other employees but also as a reserve for the traders and the directorate with a fax This selection can be enriched by setting the priorities for the internal and external lines For the priorities the valid principle is that an internal subscriber must have the same or higher priority than an external line so that it can be assigned to him 2 2 2 2 Authorisations Authorization of internal lines Tables A F Saving automat 1 WMALTBPFCFDKMELSF W Use Duty i2 ABI CI D EMF M Use Duty 13 AMBI CI DIEIF WM Use Duty 4 A BvcrbprtErFr M Use Duty 15 MAB PC DM TD F ius
68. ivation Line Warn from Selective activation 13 v Internal lines Reverse 7 V Operator v Function CALLER ID JV External lines Function CLIP w o clinking v Return DTMF v Manual v FSK IE v Dial end British Telecom FSK v Ring circular Pulse dial JV Possible to take over ringing J Switch on tape recorder Forward busy in daytime MV Forward not present in daytime oper v Forwarding all day feoiz22333 To PSTN amp Ars Forward busy at night 601222333 Forward not present at night psrw v Forwarding all night a S 4 Switch on tape recorder enable this item to connect all outgoing incoming calls to the appropriate AUX output as preset in the Global data AUX groups and Groups Switches Broadcast Tape recorder menus User s manual configuration instrument 33 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Call forwarding xxx select one of the administrator forwarding settings always busy no answer for Day Night modes For call forwarding to the public switched telephone network enter the required number into the To PSTN and ARS line Attention On lines defined as fax modem or intercom call notifications and peeping peeping after the call to an external network has ended and round calls is not automatically banned It is necessary to set it up for each individual line separately User s manual configuration instrument 34 www 2n
69. l PBX HW configuration ee 4 2N OMEGA Lite H Basic desk i mL ISDN So M GSM GSM gates B COIL Without tariff meter CO1 CO line 49 IL1 11 0ffice 1 m IL Internal sys1 14 Director o QF sys2 15 secretary bee SYS System Ey Extender 1 2 1 3 Diagnostics for the PBX and localisation User s manual configuration instrument 11 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Localization Localization International no Mational 00420 Local Installation Person TechSupport Place fen TELEKOMUNIKACE a s Language 1 bac v Language 3 Ctr X Language 2 Hu Language 4 en If you use external and internal lines with call identification support then fill in the part Localisation International fill in the international calling code usually 00 National fill in the country code in the national network for the Czech Republic CR it is 00420 Local fill in the local transfer number in the ISDN network usually 0 not used in the CR In the section nstallation you assign who and where is installed in the PBX Languages Select 1 4 user languages from the list of user languages for key system phone menus and tags extension names and personal quick dialling labels 2 1 4 External lines e Minimum ring time Determines how long the minimum continuous ringing from an external line must be detected for the external line to be announc
70. l tou have called with on oc 951s Mobility extension GSM1 sw2 UMTS VoIP Name a maximum 14 character name for the external line Series only an incoming external line which is not tested for correct working and cannot be entered upon in the outgoing direction Private a line connected to a private network which is not charged Without authorisation checks on authorisation not made on this line Roaming enabled allowing roaming on the GSM port Receive SMS allowing SMS to be accepted Send SMS allowing SMS to be sent SMS after no answered call the SMS is sent if the called party does not receive the call the missed call e SMS after accepted call the SMS is sent if the called party answers the call the established call e Trace GSM enable logging of AT communication via a GSM module into LogSystem listings By doing so you make the log heavily loaded so think twice before enabling e SMS at No Answer The text is used in the SMS if the called party does not answer the call the missed call text is common with text for MobilityExtension feature e SMS after accepted call The text is used in the SMS if the called party answers the call the established call text is common with text for MobilityExtension feature n Calling party number User s manual configuration instrument 52 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE c Calling party
71. l types of setups User s manual configuration instrument 38 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Manager setting a specific setting for the programmable buttons if at least one extender is connected Operator setting a specific setting for the programmable buttons if at least one extender is connected Reception setting a specific setting for the programmable buttons if at least one extender is connected Cancel annuls the programmable buttons settings To clipboard copies the programmable buttons settings From the clipboard enters programmable buttons settings that have been copied beforehand Export exports programmable buttons settings to a csv file Import imports programmable buttons settings from a csv file User s manual configuration instrument 39 www 2n cz 2 3 1 1 OMEGA FCI Terminal sjuug saavuag E KLS ra TW Up to 20 programmable buttons can be set User s manual configuration instrument 40 www 2n cz 2 3 1 2 OMEGA LH Terminal ilies Extenders Secretary B Can also be set with extenders 16 buttons telephone 2x20 button Extender up to 56 programmable buttons User s manual configuration instrument 41 2 3 1 3 2N StarPoint 500 Terminal STANDARD Extenders E 7 Secretary M sjuug seavuas gt X X N e It can also be set with the connected
72. le directory YYMM XXXXX PBX and extended with new data upon re loading 2 14 9 Panel Once the connection has been established you can display the port status panel of the PBX to be supervised including speech bus configuration by pressing the WINDOWS PANEL With the PBX connected bus 11 and status call shall always be displayed for the line used for remote supervision 2 14 10 Remote Supervision Logistics A record is made on the remote supervision in progress in the RRMM XXXXX LOG file including when how and by which technician the connection was established and whether the technician downloaded or saved configuration from into the PBX This file is saved together with the YYMM XXXXX PBX file 2 14 11 Disconnecting Connection A modem connection can be discontinued for cost cutting reasons by pressing the bar button DISCONNECT MODEM CONNECTION pause symbol two perpendicular lines in a green field By pressing this button you discontinue the connection keeping the original connection settings This means that to recover connection you just press the bar button RECOVER MODEM CONNECTION replay symbol black arrow in a green field and the number will be dialled automatically and the connection will be re established User s manual configuration instrument 99 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE If you used manual connection you will be invited to dial the telep
73. ling tone so that it can designate the line as working If the value 0 is set then the tone is never checked and this line will thus never report a fault e Time to dial startup determines the minimum time for dialling to be started after the external dialling tone has been detected e Min time for accounting the period deducted from the call time for temporary charging e Priority an internal line must have higher or the same priority so that it can use this external line User s manual configuration instrument 49 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 5 2 Types of digital lines So line Digital line types Line Name Options Ringing tabs UP DDI Day Night Main group das T AIMSN MSN1 222333441 Ta x T z Grou 7 Block Out 7 Auto Tel MsN2 22233342 Tab2 Tab1 Gru gt r aes autoriz msna ES EI EN IV Synchron PBX time mss Ta z ra 1 s so E Faxline M TU rr s FE Prefix j MN EI TU ETIN Min time for accounting s E a wsN Tab1 v Tab1 gt Group1 v Priority o 2 layer deactivation 00 ms Sol GSM2 Digital line types Line Name Options Ringing tabs ISDN I v DDI Day Might Main group Ine E latina MPT Seriel 12223334 Tab 1 BilllTa1 BE Group 1 lock Du zi z 1831 z Ta z fare Auto TEI o a Serie2 Without autori a T Private Serie3 Tab 1 gt Ta Group 1 Receive o
74. n the Mobility Extension IN OUT environment can only be edited here Direct editing in the Common quick dialling MENU is block for such dialling Short dials common ii dot able fi up Petr 603123456 ee jar ET HF Notable for group 2 Not abi ta delete Jv Wait for trunk Not able for group 1 Pavel 777987654 Not able for graup 2 authorization e to delete wait for trunk User s manual configuration instrument 76 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 10 2 Mobility Extension OUT Here you set up the conditions for Mobility Extension in the outgoing direction the allocated internal line rings Editing the settings for the outgoing direction is only possible if Mobility Extension IN is entered Otherwise no MENU is offered Mabiltu Cutension Ou DILEILLEEEE EI MEI uz cel EI Haus Uald ess a u Cal spe endt 14 fi Irmos z E alg wrk d ve th M v4 v A e 10 E 23er nu xl Mev al Turk xl fe 84 p vx PMN ie SE IMS a de Aw set Hizan yb 7T Ar Set DH T Ge HITT hekin F Hensin DMS ate azltphedcad i beue os ended th eh X TH eRe LTS Mrki Line and Name of the respective telephone number respective common quick dialling is automatically transferred to this table from the Mobility Extension IN settings Then enter Call at day whether outgoing Mobility Extension should be activated or not if the PB
75. nnection to a COM port or a LAN modem remote control telemonitoring confirmation reading and entering DAT into the PBX e Select communications device select COM TCP IP UDP e TCP IP Setting IP addresses of PC where an XAPI server is running e Selecting COM Selecting the COM ports e COM Baud speed Setting the speed of communication with the PBX e Select language Choosing the language you want to use User s manual configuration instrument 6 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE 1 4 Help e Contents help e Search for words in help e Using help general instructions for using help in OS WIN e About the application information on the SW version of the Program 2 Programming tables for the 2V OMEGA Lite PBX The following passages give a detailed description of all of the programming parameters in the 2N OMEGA Lite PBX The chapter is in the same position as the menu in the PBX configuration device s themed index For access to programme the PBX you need a password The PBX configuration instrument enables two types of users to change the PBX settings Password for a Supervisor user The user with the supervisor authorisation has access to all of the PBX parameters and can also change the password for a user with user authorisation Password for an ordinary User The user authorisation only allows certain PBX parameters to be changed when programming and the
76. ocking of IMSI or first IMSI part View the IMSI after the SIM card is read in the v LogSystem listing Last licence shows the valid licence serial number It is possible to download a licence with a serial number higher than the current one Such a licence may be entered just once into the PBX To enter a licence push the key button on the main bar of the configuration tool To create a licence communicate the licence type validity time and board number to the supplier Lines displays the count of available ports for each interface Languages shows the system language to be used for accounting and logsystem data listings and ME SMS messages as determined by the FW type CZ FW cz sk EN FW en de and available user languages for the key system menus and tags extension names and personal quick dialling labels The last changes item provides information on the most recent data entered into the PBX or a file for each user type User s manual configuration instrument 10 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 1 2 Hardware Information on the physical construction of the PBX including the attachment of the individual types of modules at all positions in the PBX Individual modules can be added or taken away thus altering the PBX s construction However the simplest way is to read the actual configuration directly from the PBX along a series port or through the TCP IP protoco
77. on instrument TELEKOMUNIKACE 2 14 REMOTE SUPERVISION 2 14 1 What Remote Supervision Provides instantaneous response to client needs 2N OMEGA Lite PBX programming while keeping parameters of a serial link firmware modification ISDN module tracing time RESET setting PBX port status monitoring speech bus traffic monitoring call billing DATA downloading log system DATA downloading 2 14 2 What You Need To establish a modem based remote connection you need e aPC with installed OMEGA Lite Program e a modem not winmodem connected to the PC e a file YYMM XXXXX PBX with access licence to the 2N OMEGA LITE PBX to be supervised PBX Modem Setting The internal modem is configured using the OMEGA LITE Program programming tool The modem is set using AT commands we do not recommend you to change the factory settings unless absolutely necessary and the PBX has to be RESET upon every change The modem change will be apparent 10s after the RESET 2 14 3 Creating and writing of a gateway remote access code To enable remote control of 2N OMEGA LITE PBX it is necessary to create an access code and write it into the gateway 1 Press the Connect with PBX T button on the tray 2 Press button Create User s manual configuration instrument 90 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 PBXs ox Custome gt Number Name iem 2333444555 Stet cy ze
78. onfiguration instrument then this service is not paid heed The level has values from 0 15 The default level is O User s manual configuration instrument 32 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Internal lines Services C Enable Enable Alarm Hold Breaking into level v Meeting confer v Switch over 0 E v Autoconference v Park 5 A Calling level v Private calls v Alternate 7 v Accession v Backcall E v Accounting code v Conference Level in dep v Syst short dials IV Warn o m v Fill short dials Iv Spy zl The permission to receive CLIP on an analogue telephone is carried out in the marker activation CLIP function by setting this CLIP will be displayed on analogue telephone if the analogue telephone s connection allows this CLIP function without clinking in certain cases wireless phones MICROCOM TOPCOM to receive CLIP it is necessary to set the option of without ringing This suppresses the first ringing and the accepted CLIP is displayed on the second ring DTMF setting this means the identification of the calling CLIP is sent using DTMF FSK setting this means the identification of the calling CLIP is sent using FSK the majority of telephones with the CLIP display option support it If the telephone is connected with the BT CLIP standard then it is necessary to allow the BT FSK setting Internal lines Services act
79. onnected to the modem get transferred by the TRANSFER TO REMOTE SUPERVISION default value the operator dials FLASH into the call and then press the ATA button Now the connection is being established If everything is OK the following information will be displayed gradually establishing connection connection established Nh o User s manual configuration instrument 98 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE remote supervision password confirmed 10 The following data are displayed on the bottom bar from the left to the right connection type MOD time of the PBX to be supervised activity is indicated by a pulsating target production number of the PBX to be supervised YYMM XXXXX connected Go on as if you used a serial link 2 14 8 Downloading Data With the PBX connected you can download DATA billing system messages To download data press the bar button DOWNLOAD BILLING AND DIAGN LINES symbol of the OMEGA Lite Program tool The two DATA types are downloaded together and the course of downloading is monitored graphically by the so called thermometer To display the DATA select the WIDNOWS BILLING DATA menu or PBX DIAGNOSTICS Data are displayed from the file YYMM XXXXX ACC or YYMM XXXXX DIA after being downloaded from the PBX These files are created upon the first download in the remote supervision fi
80. op that corresponds to the time set in the minimum and maximum length of the FLASH By right clicking on the box with FLASH values it is possible to set the same value in the remaining boxes in the column The field End Flash is used when it is necessary to detect a break in the connection to an analogue CO VL division The connected analogue CO line must User s manual configuration instrument 35 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE be modified for detecting a break in the connection using a disruption in the current loop If the box Pulse dialling is not ticked then it only accepts tone dialling 2 2 9 Allow direct dialling to bundles This table is used to disable the service of direct dialling to a bundle The internal subscriber is only allowed the service to the bundles that they have ticked 2 2 10 Work and private MSN Every internal line can be allocated to a different MSN for work and private calls This means that during the regular settlement of costs for the operator s network costs can be divided up by the individual MSN 2 2 11 Operating parameters See Operating data Internal lines User s manual configuration instrument 36 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 3 System lines 2 3 1 Buttons In this MENU it is possible to set the programmable buttons for all of the connectable types of telephones Two types of analogue syst
81. orary permanent switch for groups PBX 1 and 2 e Temporary activate the switch temporarily default 85 the relay is closed until the dialling timeout expires 15s the activation is terminated immediately by hang up If this item is empty you can enter the required port relay after dialling the service e Permanent activate the relay permanently default 83 the relay is closed permanently and can be opened using the Deactivate permanent switch service default 84 If this item is empty you can enter the required port relay after dialling the service Assign AUX group to Broadcast and Tape recorder e Broadcast the selected AUX ports of the selected AUX group will be used for the Broadcast default 20 service at relax and for the Announce through Broadcast service in the ringing table e Tape recorder the selected AUX ports of the selected AUX group will be used for the Switch on tape recorder default 420 service during a call and also automatically with every call of the extension for which the Switch on tape recorder service is selected in the Subscriber lines Service enable Activation menu Assign the AUX ports into groups in the G obal data AUDIO groups menu User s manual configuration instrument 69 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 7 3 Intercoms This table determines the intercoms location on the internal lines It is possible to set two intercoms for each
82. pending an external line after an outgoing call e CO In Relax The minimum time for suspending an external line after an incoming call e End of waiting on a DISA FAX modem The time an incoming external call waits after detection by the CNG fax signal or after direct inward calling on a free or engaged subscriber before hanging up on the external line or carrying on with another row in the call table e 1 dial to CO time The maximum time for delay when dialling an external line If there is no dialling during this time the external number is hung up on Dial to CO time The maximum time for delaying in dialling an external line It is renewed after every new number dialled by the internal user and after it has expired the device switches from dialling to calling It is permissible for the expiration of this time to be marked by a short peep Any other calling after this time has elapsed is considered to be a call service e Dial to GSM time The maximum time for dialling another call to a GSM line It is renewed after every new number dialled by the internal user and after it has expired the device switches from dialling to calling It is permissible for the expiration of this time to be marked by a short peep Any other calling after this time has elapsed is considered to be a call service e Max call time without break up The maximum time for a call of two external lines that have connected break up signalling e Max call time with
83. r Local IP address 10 172 132 151 Remote IP address 10 64 64 64 User s manual configuration instrument 55 2N OMEGALite Configuration instrument TELEKOMUNIKACE Digital line types Name Options Ringing tabs Without autoriz vaP gate Private Min time for accounting s fi Prefix CLIP 811 p Strip e Dial to VoIP s 25 Sol VoIP Priority Name line name of max 14 characters Without autoris the authorisation check will not be performed on this line Private line connected to the private network no accounting is performed Prefix prefix of up to four digits which will be automatically called after outgoing occupation of the line as the first DIN via the superior central Prefix is not recorded into the accounting line e Minimum time for accounting time subtracted from the call time for pseudo accounting Priority internal line must be of higher priority to use the external line CLIP enter how should the line be identified in the outgoing direction Strip enter number of digits from the incoming identification which should be subtracted in the input direction in order that the remaining digits are the DIN to the participant of DIN to the ringing table e Dial to VoIP maximal period for delay of the next selection into the VoIP line The time survey is reset after each obtained digit from the internal participant and after its expiring the dialling mode
84. rnal line can be in one or more bundles at once 2 5 6 Ringing For every external line you can set up the same or a different ringing table for the DAY and NIGHT regime The tables are general and the same table can be used for various ports e DISA when setting it is possible to call the DTMF by selecting an internal subscriber e Internal numbering plan a number received during DISA DID will be compared with the subscribers internal numbering e DDI numbering plan the number during DISA DID will be compared with the subscribers DID numbering e FAX when using the DISA command in the ringing table the fax 1100Hz introductory tone will be detected e Modem when using the DISA command in the ringing table the modem 1300Hz introductory tone will be detected User s manual configuration instrument 58 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Here you can select where the DISA is entered in the ringing table so that after an incoming ringing on an external line it takes into account FAX or Modem tone in the DTMF selection and connects to the declared internal line in accordance Ringing from external lines can elicit a maximum of 500 events Incoming traffic in CO lines v DISA v DISA Tab 4 Intem numb plan Tab 1 Intern numb plan v DDl number plan v DDl number plan JV FAX JV FAX v Modem v Modem i Ring IL i A Ring accessible External 1 aswt
85. rvices in the ringing table then the row Wait 0 is not allowed to occur 2 5 8 Global data see Global data for external lines 2 5 9 Groups and switching Here external lines are allocated to one of the two main groups depending on which decides whether it is the DAY or NIGHT regime and according to this a ringing table is selected User s manual configuration instrument 64 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 6 Saving automat After dialling the service access to an external line none of the external lines are activated For lines that use the LCR the PBX simulates an external dialling tone and awaits the next number dialled According to an analysis of the next number dialled the PBX determines the connection and carries out the connection For an internal subscriber entry to the LCR is obligatory possible or prohibited as determined in the Authorisations Table At the same time it is possible to use up to 4 analysis masks and these being in combinations that allow or block the analysis of dialling depending on the individual rows of the Dialling Analysis table 2 6 1 Dialling analysis Saving automat Selection analysis Mask of dial analysis Mask of service Ars Number Interpretation 1 Gigs EN a sf EM E oy 601 2 p1T2w3iv4 1T 2T 3f 4 602 602 EVEN LEM EM EM LE E MG 603 Ss Bigs os ew gf EM IE DN 8001112222 gt BH EN EN BENED BEN DIN 8001112223
86. t User s manual configuration instrument 46 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 3 3 Allowing services Enabling system phone services 14 w Can pick up remote v Can take over from front of other syst lines Can use headset P Active headset v Automat answer enabled v Loud invitation w o MUTE Automat answer active v Cancel all Calllist This is where the permission for certain services on the pertinent system phones is done Can pick up remote remote answering is allowed with the voice call service The speaker of a loud telephone is activated and the microphone is muted Loud invitation without MUTE a similar function as remote answering but activated by the microphone Can take over from front of other system lines by pressing a light button it is possible to take over a queued call from another system telephone Cancel callthrough the permission it is possible to refuse a call to an independently ringing system telephone by pressing the Cancel button and then no longer continuing in the ringing table Call list by allowing this it enables a printout of the calls to be made We recommend prohibiting this for system phones that do not support this function necessary to have at least the 05 12 version of the system phone Can use the headset this permission enables the Speaker loud telephone headset function to be controlled through t
87. t free accessible internal Ring accessible linearly no queuing system line If it is engaged then it does not form a queue If only one ringing then it rings on Ring dept linear Departments 1 to 8 Rings first free number from the department Ring dept cyclic Departments 1 to 8 Cyclically rings first free number from the department Ring entire dept Departments 1 to 8 Rings entire department Ring dept linear Departments 1 to 8 without queue or jump Rings first free number from the department If internal lines engaged then it does not form a queue and carries out the command two rows down Ring dept cyclic Departments 1 to 8 without queue or jump Rings another free line from the department If internal lines engaged then it does not form a queue and carries out the command two rows down Ring entire dept without queue or jump Departments 1 to 8 Rings entire department If internal lines engaged then it does not form a queue and carries out the command two rows down Ring operator None Rings the operator Rings the voice mailbox given by the Ring voicemail VL number or SYS parameter Action Parameter Description Don t ring None End all ringing Wait Time from 1 to 999 s Wait for the set length of time 0 unlimited wait User s manual configuration instrument www 2n cz 60 2N OMEGA Lite Configuration instrument TE
88. t neret nene nnne enne enne enne rennen 36 2 2 11 Operating parameters sess nne nnne en neren tenen nne enene enne nen enne 36 DNESU UIDI E 37 2 3 1 hun mee M 37 2 3 2 Description of the buttons enne nennen enne enne nenne nne there en nere nnnenne 45 2 3 3 Allowing services eeeeeeeeeeeeeeeeeeee eene nennen enne nennen enene a sanse ponani nter tenerent rennen 47 NBI 47 2 4 1 Numbering the virtual lifies iie eei ete eL eise sess itta tene beo Poe casa Pe ore esa aies Ee 47 2 4 2 Direct selection on the bundles allowed sss 48 2 4 3 Wrath credit e ERREUR IRR RAI 48 2 4 4 Pus IMMER 48 2 4 5 Allocating a bundle seen enne nennen nennen entente entere issida 48 2 4 6 Mask for dialling analysis eee nnne neren nnne 48 ZI 49 2 5 1 Types OF lines eroe e re a ee qon v etie hein pee tule el peak ub v Dre Pu Rare ep eed 49 User s manual configuration instrument 3 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 2 5 2 Types of digital lines USED PLE petiere PSP 50 2 5 3 SUNT RACE Be eee ee ea 57 2 5 4 Kp ccc Gia I 58 2 5 5 Tr nks for accessing TiN SIN oie ie ane RR eel 58 2 5 6 RINEN xDD T 58 2 5 7 Ringing table DI 60 2 5 8 iei licec E T 64 2 5 9 Groups and switching pete etie peoples ee tout
89. t records voice 3 Wait 20 e g you will be connected to the answer Call operator phone it connects to the answer phone on line Wait 30 19 and if the answer phone does not accept the Don t call call then it hangs up after 90 secs Voice 3 Call voicemail 11 Wait 90 Hang up Tab 5 Parameter Example 6 Delayed DISA During an Action incoming ringing it rings for 20 secs on the Call accessible accessible lines and line 19 If no one picks lines it up then it picks up the external line then it Call VL 19 awaits the DISA or fax DID with the voice Wait 20 signal number 1 After the signal subsides it DISA 1 waits 6 secs and if a DID does not come in Wait 6 that time it rings line 12 and the operator for DISA End 30 secs If no one takes the call in this time Call VL 12 it plays voice 2 to the subscriber and hangs Call operator pe Wait 30 Don t call Voice 2 Hang up Tab 6 Example 7 Using CLIP support ringing from Action Parameter an external line is directed to internal line 15 Wait 2 The time it rings on line 15 is not influenced Call VL 15 by the ringing table and is controlled by the Wait 0 settings in line 15 For this case it is most Hang up important to prearrange the command Wait with the parameter 2 secs before the actual Tab 7 command Call VL with the parameter 15 User s manual configuration instrument www 2n cz 63 2N OMEGALite Configuration instrument TELEKOMUNIKACE IMPORTANT When using the DISA se
90. verlap dial Ta z Ta E 1 x Send CLIP Serie4 Tab 1 Tab 1 roup v Synchron PBX time Serie5 Tab 1 T Group 1 Fax line Series Tab 1 Tab 1 Group 1 Frere Serie7 Tab 1 x Tab 1 Group 1 Min time for accounting s fi z Secs rat m T v Group1 7 Priority o 2 layer deactivation i00 ms Sol GSM1 GSM2 e Name a maximum 14 character name for the external line e DDI ISDN line in the PTP connection e MPT configuration enables NT1 analogue telephone equipment to be connected to an ISDN line with a DID e All MSN reacts to all incoming numbers by a ringing set on the MSN1 User s manual configuration instrument 50 www 2n cz 2N OMEGA Lite Configuration instrument TELEKOMUNIKACE e Block Out only an incoming external line and it cannot be entered on in the outgoing direction Auto TEI Without authorisation checks on authorisation not made on this line Private a line connected to a private network to which charging is not done Receive overlap dialling only for special PTMP applications Send CLIP it is possible to forward the caller s CLIP to a private ISDN line Synchronising PBX time during an outgoing call the PBX time is synchronised with the ISDN operator s time if the operator provides this Fax line labelling an ISDN fax line Calling is with 3 1 audio signalling e Prefix a 4 digit prefix which is
91. y formed right click with the mouse on the voice you want to change Mess File Userl DISA1 ENG wAV i DISA ENG wia Music 2N wav SYSO1 EN wav SYS 2 EN wav SYS 3 EN wav SYSU4 EN wav SYSO5 EN wav SYS06 EN wav select the voice formed that is saved in the Wav directory press the key Save Adding a new voice press the key Load enter the voice created into the Wav directory formed right click with the mouse in the space for user voices DISA1 ENG WAV select the command Add select the voice formed that is saved in the Wav directory press the key Save 2 1 15 Modem Changes can be made in the internal modem s configuration depending on the PBX model for telemonitoring The basic set up accepts silent running of the modem The settings are changed by the AT command The command is accepted after carrying out a RESET User s manual configuration instrument 24 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE Permission for Modem switch for telemonitoring in the DISA detection is according to the ringing table selected if it is sited directly in the modem module 2 1 16 GSM Call Volume Levels The table helps adjust the automatic call volume through a GSM module against other interfaces GSM call volume levels From PBX to GSM dB From GSM to PBX dB The values are in dB Take small steps while changing the settings
92. zation Setting the time to the PC which is connected to the PBX e Upload the PBX software Loading firmware into Flash e Reset and boot the PBX from Flash Reset the PBX with firmware support into Flash and rewriting it into RAM e Freezing the PBX The PBX switches to the service regime Ongoing calls are completed other calls cannot be started This state is indicated by the sign PBX repairs on the system phones Afterwards it is possible to turn the PBX off and change the modules The PBX switches to the operating state after the command Unfreeze PBX or after turning on or off Unfreezing the PBX Returning to the operating state Print actuel window Printing sets Print setup Close the program User s manual configuration instrument 5 www 2n cz 2N OMEGALite Configuration instrument TELEKOMUNIKACE 1 2 Windows e Cscade Grouping the windows into a cascade e Tile Grouping the windows next to each other without overlap e Arrange icons e Panel The state of the lines e Account data Displaying calls e PBX diagnostics Displaying log system reports 1 3 Settings CET inl x Local connection Modem Confirmation Active device COM C TCP IP Over IP Modul C UDP COM Port cow2 Baudrate 57600 TCP IP Name IP address Port Default T4750 OT Y Default 127 0 0 1 1234 UDP l IP address Port 1923158 1 50 feo X Cancel Settings for local connections co

2N OMEGA Lite - Config tool L&Scaron; 1340v.1.6

Contents

Download Pdf Manuals

Related Search

Related Contents