Home

PDC-35 - DiscoWorld.dk

image

Contents

1. either USB or CD mode 16 gt S BUTTON For selecting random play With the function activated the LCD will light up 17 PITCH BEND BUTTON The pitch will drop while the button is pressed and return to the original pitch when it is released 18 PITCH BEND BUTTON The pitch will automatically rise when the button is pressed and return to the original pitch when it is released 19 USB PORT Support USB playing and you may also connect the computer with the USB cable but only when enter into USB work mode 20 DISPLAY 21 DISC TRAY To enter the disc please refer to the explanations under 6 2 CD tray REFERENCE DRAWING FOR FRONT PANEL 22 DELETE BUTTON Delete songs on the SD or USB track 23 SD CARD SLOT Slot for inserting SD card The contacts of the card must point downwards unit cannot read cards with a capacity of more than 4GB The unit is not compatible to SDHC cards and only 24 FOLDER Allows you to navigate through folders or tracks similarly in either USB or SD mode 25 USB PORT ALLOWS THE CONNECTION OF ANY USB MEMORY STICK 24 FOLDER Allows you to navigate through folders or tracks similarly in either USB or SD mode 26 10 BUTTON Use this button to jump of 10 tracks in one press 27 DISPLAY 28 HEADPHONE VOLUME Adjust the headset volume 29 REPEAT BUTTON USE THIS BUTTON TO REPEAT ONE TRACK OR ALL THE TRACK OF THE CD 30 CONT SINGLE BUTTON Press this button to switch between the SINGLE and C
2. ONTINUOUS play mode The selected mode is indicated on the LCD In SINGLE mode after each track the unit stops the reading In CONTINUOUS mode the unit reads all tracks and stops 31 SD USB BUTTON Press this button to choose SD or USB mode while USB connect and the SD in the tray 32 SKIP I lt lt BUTTON Use this switch to restart the track or to select the last track 33 SKIP gt gt I BUTTON Use this button to select the next track 34 RECORD BUTTON Enter the recording mode 35 STOP BUTTON Pressing the CUE button during play provides a return to the position at which play was started 36 PLAY BUTTON Each time you press the PLAY PAUSE button the operation changes from play to pause or from pause to play 37 RECORD VOLUME Used to adjust the level of volume which be recording 38 HEADPHONESINPUTS 3 5 MM JACKS HEADPHONE FOR CONNECTING STEREO HEADPHONES REFERENCE DRAWING FOR BACK PANEL AC CORD Use this cable to connect the AC mains power to the unit POWER BUTTON Press the power switch to turn the unit on To switch power off press the power switch again LINE OUT B The audio for the left USB player is an output for these jacks LINE IN The audio for each SD USB player is an input for these jacks LINE OUT The audio for each SD USB player is an input for these jacks LINE OUT A The audio for right SD player is an input for these jacks This button sets the beginning of the loop The Loop
3. Pa La Dynamics Professorial Audio PDC 35 PROFESSIONAL MP3 CD PLAYER USB SD PLAYER RECORDER USER S MANUAL 172 824 IMPORTANT SAFETY PRECAUTIONS This symbol is to alert the user to the presence of uninsulated dangerous voltages inside the product s enclosure that may constitute a risk of electric shock This symbol is to alert the user to important operating and maintenance service instructions in this manual and literature accompanying the product Caution Marking Explanation CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING CHANGES OR MODIFICATIONS TO THIS UNIT NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE WILL VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT ANY CHANGE TO THE EQUIPMENT WILL VOID FCC GRANT This equipment has been tested and found to comply with the limits for a Class C digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This eguipmetn generates uses and can radiate radio freguency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However htere is no guarantee that interference will not occur in a particular installation If this w
4. a swimming pool and the like 3 IMPORTANT SAFETY PRECAUTIONS Cleaning The appliance should be cleaned only as recommended by the manufacturer Non use periods Unplug this apparatus during lightning storms or when unused for long periods of time Object and liguid entry Care should be taken so that objcets do not fall and liguids are not spilled into the enclosure through openings Damage reguiring service The appliance should be serviced by gualified service personnel when A The power supply cord or the plug has been damaged B Objects have fallen or liguid has been spilled into the appliance C The appliance has been exposed to rain D The appliance does not appear to operate normally or exhibits a marked change in performance E The appliance has been dropped or the encolsure damaed Servicing Do not attempt to service the appliance beyond that which is describde in the operating instructions All other servicing should be referred to gualified service personnel Outdoor antenna grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electrica Code ANSI NFPA NO 70 1984 provides information with regard to proper grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and require
5. especially if the unit is connected to a power source WARNING Do not turn on your stereo system with the volume at maximum This will damage your speakers and void you warranty Getting your system ready for use Cloose an area away from heat Allow about Te inches between the cabinet back and the wall for propor ventilation Place your system near an outlet supplying common household current 105 120V AC60HZ Grounding or polarization Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Power cord protection Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Carts and stands Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Water and Moisture The appliance should not be used near water for example near a bathtub washbowl kitchen sink laundry tub in a wet basement or neat
6. indicator on the display flashes WARRANT Y CONDITIONS PDC 35 equipment is covered by a 1 year warranty on parts and labour except for faders 90 days The follwing rules apply from the day the equipment leaves the factory The date on the invoice is considered to be the date the warranty begins Only companies approved by PDC 35 are allowed to work on the equipment Warranty becomes void when other service technicians open the equipment During warranty period defective equipment must be sent by pre paid mail in the original box PDC 35 will return the goods by pre paid mail during the first year of warranty thereafter the mailing cost is to be paid by the recipient Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use For all service enquiries refer to your local distributor as he is best able to help you SPECIFICATIONS Anti Shock Buffer Memory 40 seconds Power supply 100 240v 50 60Hz Dimensions 482x45x52 5mm
7. last saved loop To finish the loop press the reloop button 8 IN BUTTON This button sets the beginning of the loop The Loop indicator on the display flashes REFERENCE DRAWING FOR FRONT PANEL 9 OUT BUTTON When you press this button you set the end point of the seamless loop and you start the loop To finish the loop press again this button 10 CONT SINGLE BUTTON Press this button to switch between the SINGLE and CONTINUOUS play mode The selected mode is indicated on the LCD In SINGLE mode after each track the unit stops the reading In CONTINUOUS mode the unit reads all tracks and stops 11 PROG AND FOLDER CONERSION BUTTON In STOP mode you can program several tracks 20 tracks max Press the STOP button to enter in the stop mode Press the PROG button to enter in the program mode Use the skip track buttons to choose the track you want to listen then press the PROG button to enter your choice Use one more time the skip track buttons to choose the track you want to listen then press the PROG button to enter your choice Repeat the operation to select all the track you want to listen Press the play pause button to start the playback 12 10 BUTTON Use this button to jump of 10 tracks in one press 13 SKIP I lt lt BUTTON Use this switch to restart the track or to select the last track 14 SKIP gt gt BUTTON Use this button to select the next track 15 FOLDER BUTTON Allows you to navigate through folders similarly in
8. licable to the particular apparatus the in formation and warnigns listed before The wording is capable of being supplements although not replaced by drawing or cartoons 5 The symbol shall be shown adjacent to the text of important safety instructions 2 IMPORTANT SAFETY PRECAUTIONS A Safety Instructions A Installation Operate the unit only from a power source as indicated on the unit or in the operating instructions Overloaded AC outlets and extension cords are dangerous and 32 are frayed cords and broken plugs Call your service technician for replacement of such cords and plugs Audio products are provided with ventilation openings to allow heat generated durin operation to be re t TE hesg openings are blocked heat build up within the Set can cause failure which may result in a fire hazard Therefore 1 Never block the ventilation openings of a unit by placing it on a bed soft rug etc 2 Never place a set in a built in enclosure unless proper ventilation is provided 3 Never cover the opening with cloth or other material 4 Do notinstall near any heat sources such as radiators heat registers stoves or other apparatus a amplifiers that produce heat 9 PP To avoid personal injury 1 The manufacturer recommends that this unit not be mounted on a wall or ceiling 2 Carefully follow the operating instructions when making connections 3 Do not insert tools hands or fingers in openings such as tape slot
9. ments for the grounding electrode See Figure 1 IMPORTANT SAFEGUARDS 1 READ sd katad eee the safety and operating instructions should be read before the product is operated A AE TAIN ASTRUC Daal safety and operating instructions should be retained for future referencd alal WRNING AII warnings on the appliance and in the operating instructions should be adhered 0 4 FOLLOW INSTRUCTIONS AII operating and use instructions should be followed REFERENCE DRAWING FOR FRONT PANEL 43 5 IMPORTANT Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure CD player Function 1 EJCET BUTTON Press to load or eject disk Each press will open or close the disk tray NOTE Disc holder will not open unless stop or pause button has been pushed first 2 PLAY PAUSE BUTTON Each time you press the PLAY PAUSE button the operation changes from play to pause or from pause to play 3 CUE BUTTON Pressing the CUE button during play provides a return to the position at which play was started 4 CD USB BUTTON Pressing the CUE button during play provides a return to the position at which play was started 5 TIME BUTTON Used this button to choose the time mode Elapsed time remaining time or total remaining time 6 REPEAT BUTTON Us Use this button to repeat one track or all the track of the CD 7 RELOOP BUTTON This button is used to start the
10. quipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving anterna Increase the separtion between the wguipmetn and receiver Connect the equipmet into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an expeiencde radio TY technicial for help This device complies with Part 15 of the FCC Rules Operation is subjcet to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesirde operation CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPARATUS TO RAIN OR CORDS IF THIS HAPPENS BE SURE POWER TO THE ELCETRICAL OUTLET IS TURNED OFF BEFORE YOU TOUCH OR UNPLUG THE APPLIANCE Outdoor Use and Wet Location Warning Note 1 Important safety instructions shall be provide with each appliance These safety instructions may be in the form of a separate booklet separate sheet or part of the instruction manual 2 If included in the instruction manual the safety instructions shall be located before any operationg instructions 3 These instructions shall be entitled IMPORTANT SAFETY INSTRUCTIONS 4 The safety instructions shall include as app

Download Pdf Manuals

image

Related Search

Related Contents

E8408A C-Size VXI Mainframe User and Service Manual  取扱説明書(RX-651/RX-651E)    EMDE13011452 EMAUX激流喷嘴EM0055 英文说明书 20130510  取扱説明書 - TAIYO  Fritadeira MOD OFE 290 – Manual de serviço  CROQUET  Release Notes  Origin Storage DELL-BDRW-SATA  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.