English manual
Contents
1. A mesh into place after adjustment Further the back also angles by pulling the strap on the back of the chair Please take care not to get your fingers caught between the rotary joint and the back C We recommend to remove the pressure load from the users body and legs before angling the back and leg support Put a gentle back pressure on the back and leg support to remove the pressure load secure the chair when any adjustments have been made Then place the user into the Manatee LEG SUPPORT ANGLING The leg support on the Manatee angles individu ally Please follow the description below when angling the back 1 Press the release buttons A on both sides 2 Angle the leg support B into the required position 3 Please check that both release buttons A mesh into place after adjustment Further the leg support also angles by pulling the strap underneath the chair We recommend to remove the pressure load from the users body and legs before angling the back and leg support Put a gentle back pressure on the back and leg support to remove the pressure load secure the chair when any adjustments have been made Then place the user into the Manatee SEAT DEPTH The seat depth on Manatee size 0 can be ad justed in two positions 1 Dismount the screws A in both sides with a 4 mm Allan key 2 Replace the short tubes with the long enclo sed ones Fasten the screws A sec2. designed to make it easier to place the user in the chair Secure the chair when any adjustments have been made Then place the user into the Manatee BODY SUPPORT Please follow the description below to mount the body support the correct way 1 Fasten the strap with velcro around the back A 2 Place the user in the chair Mount the strap B around the body 3 Tighten the body support with velcro and the buckle C The body support may not be used as a long term support This support is only designed to make it easier to place the user in the chair Secure the chair when any adjustments have been made Then place the user into the Manatee POMMEL WITH STRAP Please follow the instructions below to mount the pommel and the strap the correct way 1 Fasten the strap with velcro underneath the seat A 2 Adjust the pommel B sidewards to gain the optimal position The pommel with strap may not be used as a long term support This support is only designed to make it easier to place the user in the chair secure the chair when any adjustments have been made Then place the user into the Manatee STRAPS FOR LEG CONTROL Please follow the description below to mount the straps the correct way 1 Fasten the strap with velcro underneath the leg support A 2 Adjust the straps B sidewards to gain the optimal position Fasten with velcro The straps may not be us
3. and intervals prescribed by the supplier and or stated in the manual For further information we refer to the R82 homepage download The warranty can only be sustained if the R82 product is in use in the same country where it was purchased and if the product can be identified by the serial number The warranty does not cover accidental dam age including damage caused by misuse or neglect The warranty does not extend to non durable parts which are subject to normal wear and tear and need periodic replacement The warranty is null and void if non original R82 parts accessories are used or if the product is repaired or altered by anyone other than an authorised R82 representative or by trained personnel officially recognised by R82 for repair and maintenance of R82 products R82 reserves the right to inspect the product being claimed for and the relevant documentation before agreeing to the warranty claim and to decide upon whether to replace or repair the defective product It is the customer s responsibility to return the item being claimed for under warranty to the address of purchase The warranty is given by R82 or subsequently an R82 dealer MAINTENANCE When the chair has been used in water containing chlorine it has to be washed out with clean water and dried with a cloth Make sure that all water is out of the frame Do not use any cleaning materials containing chlo rine or methylated spirit All screws on the chair have to b
4. four fingerscrews B Make sure the chair is properly fitted on the the frame E g lift the seat to make sure it is corretly fastened to the frame HEIGHT ADJUSTABLE FRAME Mounting the wheels Fit the 4 wheels using a spanner and tighten to ensure safe fitting Adjusting the frame Loosen the fingerscrews A Unfold the frame and rise to the desired height Make sure to tighten the fingerscrews A properly in the wished height Placing the chair on the frame Lock the wheels into position using the foot operated locks Place the rear B of the chair in the holder on the frame E You may need to use the adjusters G to achieve the desired position Place the front D of the chair in the other holder on the frame C Pay attention that you do not get your fin gers trapped when folding unfolding the frame The chair must be placed in the centre of the frame Between the 2 rubber supports F Make sure that G is clicked into place test the chair to make sure it is properly fitted onto the frame WALL FITTINGS FOR FRAME Drill 8 mm holes for the screws B Place rawlplugs C in the holes Screw the 2 wall fittings A into the wall with the screws B Hang the folded Manatee frame on the wall fittings The wall fittings are only for the Manatee frame eoeeecece eee eee eee eee eee eee eee eee eee eee eee eee eee eee eee eseeeeseeseeeeeeeeseeZreeeeeee
5. 16 PROGUCT IGEN CANON irsse csnen5 2ceacscsraenctatcanecseeauessenecewanasese 17 Wiles S10 219 0 9 eee eee eee ee eee eee ee ee 18 OCMC O O errre EEE EETA 19 ROG T erea EEE EE E E E EEA 19 DRDO eraa EEA 19 Care and maintenance onnnennenoaneenennnnneonnonrrnnrnnrnnene 20 TrouUDIESNOOUNG ssosisser sineera Eni aes 20 MANATEE Congratulations on your new Manatee bathing chair In choosing the Manatee we are sure that you have got a bathing chair which will live up to any expectations one can have for a modern aid for children The Manatee is designed to be used in bathrooms in which the child can not ever be left alone The Manatee is a bathing chair for children between 1 and 11 years with a lesser handicap The Manatee is constructed to provide both caregivers and users a wonderful bathing experience The bathing chair is designed to place the user in exactly the right sitting position The depth of the seat can be adjusted allowing the bathing chair to grow with the child and provide many years of use The adjustments and accessories are logically positioned affording the caregiver proper working conditions This user manual is meant as a guide to assist the user in gaining the full benefit of the many options offered by the Manatee Therefore we recom mend you to go through this manual before the Manatee is put into use SAFETY The Manatee has earned the CE mark This certifies that it meets all relevant E
6. R R82 A S Parallelvej 3 8751 Gedved Denmark Please find your distributor on www R82 com CARE AND MAINTENANCE COVER The cover is made of fire resistant fabric The cover can easily be removed and can be machine washed at 60 R82 recommend washing at 50 FRAME Make sure that all screws underneath the chair A are safely fastened especially when the chair has been adjusted from one depth to another The screws B at the rotary joints have to be inspected on a regular basis It is important to keep the chair clean both considering your own well being and the validity of the warranty When the chair has been used in water containing chlorine it has to be washed out with clean water and dried with a cloth Make sure that all water is out of the frame Do not use any cleaning materials containing chlorine or methylated spirit INSPECTION It is important to be aware of any indications of beginning faults on the frame PVC parts and the like REPAIR If there is a fault on your bathing chair you should contact your dealer at once Defective chairs should not be used If your chair needs reconditioning or repair only original R82 parts must be used Accessories or available spare parts which are broken can be forwarded to R82 for repair If fault occurs in the fundamental parts the whole chair needs to be returned to R82 for repair R82 will not be held responsible for damage or injury caused by use of non original parts or repairs ma
7. Rec manoltee English manual 2010 R82 A S All rights reserved The R82 logo and the bathing chair Manatee are registered trademarks of R82 A S 10 2015 rev 3 eoceeecec eee eee eee eee eee eee ee eee eee eee eee ee eee eee eee eee eseeeeeeeeeeeeeeseeeeeeZeeeeeeeeeeeeeeee ee ooo HEH HHO HO HOHE HOH HO HOH HHO HOH HHO HEHEHE EHO HOHE OOOO HOHE EOE OS SA acess ease E day cases E E E E E 4 NUM EAA AE EN A 4 Di AMIS ANOS otis ce ercea ces ndaohtaua senses patented anA aiani 5 Preparing 10r USO esse rsencersnc ats op ncaeersen soreness EREE Eaa 5 BACK AGING aacaercecotaecaientenscceecesaac cast EEEE SE EEEE SiS 6 Leg support angling Penner mentee ere one te iene tenn terete rer te ten tee 6 Se CS OU e A E r SCENEN ere EE SEEE ee 7 JCAL ANGINO eee eee ee eee ere nee eee ee 8 Head sidesupport deen oe ene enter eee ee ee 8 FAO SUDDO oe atest E E E E 9 BOOY SUDDO ee E E E anes 9 Pommel with strap xsciscrcancasscccrserssness sanssananedscepeceneoamyintnees 10 Straps for leg COMMON seieoat tee ee ee eda tae 10 Dismounting and mounting the COVET ccceeeeeee ees 11 Folding the chair ssepetessoancesstocseace apeuee eeeeeiae oaiewecetecieacomeameceeasrs 12 FAO eer E E E AEE ann 13 Height adjustable Frame scene se diacarns ences een enncaaesemesecse 14 Wall fittings for frame va desipiot cic ena peece eee sdatenseaeeeeceeudoeesacbesasss 15 Product identification rscceencets co eacanenenenseteaesseuentonsnenensvedenss
8. de by a non authorized R82 person TROUBLESHOOTING Problem solution The screws do not mesh into Slide the frame out to its longest length Turn the seat over and slide the nut along the nuts after adjusting the to the hole in the frame and the screw can then be fastened securely depth The release buttons do not Move the frame backwards and forwards slightly until the buttons mesh into mesh into place place The cover has become loose Tighten the cover with the velcro underneath the seat and leg support The chair slips on the bath The rubber cover may be damaged Please contact R82 and replace the cover bottom The velcro does not fasten Remove any dirt from the velcro If this do not work the cover or accessory has to together be replaced Please contact R82 The user helper may experience several of these problems in a bathing chair that is incorrectly adjusted or is being incorrectly used 20
9. e check that both release buttons A mesh into place after adjustment The front leg also adjust when pulling out the strap underneath the seat The user must be removed from the pro duct before angling the chair legs secure the chair when any adjustments have been made Then place the user into the Manatee HEAD SIDESUPPORT As standard the Manatee is delivered with a head sidesupport The support can be used either as a head or as a sidesupport Follow the description below to mount the support in the correct way 1 Spread out the strap with the reverse up Place the wedges on the strap in the required position A 2 Fold up the ends of the strap and fasten it to the wedges B with the velcro 3 Turn the strap around and it is ready to be mounted on the chair C Make sure that the wedges are well fas tened to the velcro on the strap The head sidesupport may not be used as a long term support This support is only designed to make it easier to place the user in the chair secure the chair when any adjustments 8 have been made Then place the user HIP SUPPORT m As standard the Manatee is delivered with a hip support Follow the description below to mount the support the correct way 1 Fasten the strap in the fittings A on both sides of the chair 2 The hip belt is tightened with velcro and a buckle B The hip support may not be used as a long term support This support is only
10. e checked regularly to avoid unintended failures Adjustments which are not described in this manual must only be made by authorized R82 personnel PREPARING FOR USE We deliver the Manatee folded which means it takes up as little space as possible during transport Follow the instructions below to prepare your bathing chair for use 1 Press the release buttons A on both sides and fold down the chair legs 2 Press the release buttons B on both sides and fold down the leg support 3 Press the release buttons C on both sides and pull up the back The Manatee is ready for use Please check that all release buttons mesh into place after adjustment A Never leave the user unattended in the Manatee The user must be removed from the product before angling the chair legs We recommend to remove the pressure load from the users body and legs before angling the back and leg support Put a gentle back pressure on the back and leg support to remove the pressure load eoeeeec eee eee eee eee eee eee eee eee eee eee eee eee eee eee eee eeseeeeeeeeeeeeeeseeZeeeeZeeeeeeeeeeeeeeee ee oo oH EHO HHO HO HOHE HHO HHH HOH HHO HHO HOH HOE HOODEO EOE HOO EEO OES BACK ANGLING The back on the Manatee angles individually Please follow the description below when an gling the back 1 Press the release buttons A in both sides 2 Angle the back B into the required position 3 Please check that both release buttons
11. ed as a long term support This Support is only designed to make it easier to place the user in the chair Secure the chair when any adjustments have been made Then place the user into the Manatee DISMOUNTING AND MOUNTING THE COVER Follow the description below when the cover needs to be dismounted and washed 1 Unzip the cover on the back A and under neath the seat B 2 Open the velcro underneath the chair C and the cover can be pulled up D and off the chair Please look in the back of this manual re garding maintenance of the cover Follow the description below to remount the cover on the chair 1 Put the cover over the back and pull down D Make sure that the foam cushions in the cover are placed around the frame 2 Zip the cover on the back of the chair A 3 Mount the small cover piece with the zipper underneath the chair B Make sure that the velcro is pointing downwards 4 Tip up the leg support E and the velcro un derneath the seat C and underneath the leg support C can be closed Make sure that the foam cushions in the cover are placed around the frame 5 Tip down the leg support E and make sure the velcro is fastened correctly Please check on a regular basis that the Zippers A B are safely closed Please check on a regular basis that the velcro fastens safely together 11 FOLDING THE CHAIR The Manatee can easily be folded and stored without ta
12. eeeeeeeeeeeeee oe oH EHO HHO HO HOHE HOH HOO HHO HOH HHO HHO PHO HOE HOHE OEE HOO OEE OES PRODUCT IDENTIFICATION Size 0 A Serial number The label is placed on the right side of the cross bar on the back B Manufacturer The label is placed on the right side of the cross bar on the back Size 1 2 3 A Serial number The label is placed on the inside of the frame at the right side of the chair B Manufacturer The label is placed on the inside of the frame at the left side of the chair Dato 31 01 02 Belast kg 0840 01 111878 001 Varenr 880003 5707292 134158 Ree ce Parallelvej 3 DK 8751 Gedved PRODUCT IDENTIFICATION Frame A Serial number The label is placed on the inside of the frame B Manufacturer The label is placed on the inside of the frame Height adjustable frame A Serial number The label is placed on the inside of the frame B Manufacturer The label is placed on the inside of the frame Date YYYY MM DD Max Load XX KG SN XXXXXX Ver XX Art No XXXXXX Product Size X MANN CE 01 0570729530134 21 256829 Rec Parallelvej 3 DK 8751 Gedved www R82 com Made in Denmark eoceeecec error reece eee eee eee eee eee eee eee eee eee eee eee eee eee see eseeeeeeeeeeseeeeeeZeeeeeeeeeeeeeeZe ee ooo HE HO HHO HOHE HO HoH HOH HOO HHO HHO HOH HOE HOODEO HEHE O EEO EOE OS Seat width A Seat depth B Back height C Lower leg length D Seat heigh
13. king up much space Follow the description below to fold the Manatee correctly 1 Press the release buttons A on both sides and move the leg support up into the horizon tal position 2 Press the release buttons B and move down the back into the horizontal position 3 Press the release buttons C and tip up both a the front and rear legs into horizontal oe aa gt The Manatee is now folded The user must be removed from the pro duct before angling the chair legs We recommend to remove the pressure load from the users body and legs before angling the back and leg support Put a gentle back pressure on the back and leg support to remove the pressure load Please check that all release buttons mesh into place after adjustment Please take care not to get your fingers caught between the rotary joint and the back D If desired it is possible to pull out the release strap with one hand and angle the back with the other hand E FRAME Adjusting the frame Loosen the fingerscrews A in both sides Pull out the frame to the desired position Make sure the fingerscrews A clicks into place in the holes in the bars Please be aware of the max indication on the bar Placing the chair on the frame Loosen the fingerscrews B Place the rear C of the chair in the holder on the frame D Place the front E of the chair in the other holder on the frame F Fasten the
14. t E Total width G Length folded H Height folded Weight Max load weight Frame Frame width Frame length Height Height min Height min with seat Height mid Height mid with seat Height max Height max with seat Height folded Frame weight Max load on frame Size 0 mm inch 330 12 4 220 250 8 2 9 300 370 11 1472 390 460 15 4 18 430 16 280 11 140 430 5 16 420 16 1030 1100 40 43 130 5 5 kg 12 Ib 50 kg 110 Ib Height adjustable 590 mm 23 980 mm 38 380 mm 760 mm 440 mm 840 mm 480 mm 18 900 mm 35 210 mm 8 8 kg 17 5 Ib 75 kg 165 Ib 143 4 2934 17 3234 OO OL OL A m MEASUREMENTS Size 1 mm inch Size 2 mm inch Size 3 mm inch 330 12 330 12 400 15 2 400 470 15 187 640 25 350 137 140 430 5 16 4 430 16 280 11 140 430 5 16 4 580 22 350 13 140 430 5 16 420 16 420 16 490 19 1100 1170 43 45 1360 1430 53 55 1440 1510 56 58 4 130 5 130 5 130 5 5 kg 12 Ib 6 kg 13 Ib 7 kg 15 5 Ib 50 kg 110 Ib 75 kg 165 Ib 75 kg 165 Ib Basic 435 mm 17 990 1110 mm 387 2 437 270 mm 107 2 kg 4 5 Ib 75 kg 165 Ib 18 TECHNICAL DATA Frame Powder lacquered Aluminium tubes ABS parts Glass fibre strengthened Nylon Cover Fire resistant 100 polyester DISTRIBUTOR PRODUCE
15. urely Please follow the below to adjust the seat depth of the Manatee size 1 2 1 Loosen the screws A in both sides with a 4 mm Allen key 2 Adjust the depth into the required position by pulling out the frame 3 Fasten the screws A again Please check on a regular basis that the screws are fastened safely Make sure that the screws mesh into the nuts The user must be removed from the prod uct before adjustment secure the chair when any adjustments have been made Then place the user into the Manatee SEAT HEIGHT The seat height of the Manatee can be adjusted by changing the position of the legs 1 Press the release buttons A in both sides 2 Angle the legs B into the wanted position 3 Please check that all release buttons A mesh into place after adjustment The legs also adjusts when pulling out the strap underneath the seat The user must be removed from the pro duct before angling the chair legs secure the chair when any adjustments have been made Then place the user into the Manatee eoeeeec eee eee eee eee eee eee eee eee eee eee eee eee eee eee ee eeeseeeeseeeeeeeeeeseeZreeeZeeeeeeeeeeeeeeZe ee ooo HEH HHO HOHE HOH HOH HHO HHH HOH HOOP HOHE HOO HOE OEE OES SEAT ANGLING Please follow the instructions below to adjust the seat angle on the Manatee 1 Press the release buttons A on both sides 2 Angle the front leg B into the required posi tion 3 Pleas
16. uropean safety requirements The durability of this product is 5 years when it is used on a daily basis Hereafter the product must be renovated by R82 personnel to extend the lifetime Remove the CE mark when rebuilding the product or when using other than original R82 spare parts Never leave your child unattended in this product Ensure constant supervision by an adult Incorrect use of the product may cause serious injury to the user Ensure that the belt is securely fixed to the product before every use The user must be removed from the product before angling the chair legs We recommend to remove the pressure load from the users body and legs before angling the back and leg support Put a gentle back pressure on the back and leg support to remove the pressure load Check the temperature of the water before the Manatee and the child is placed in the bath The enclosed belts and accessories can not be used as long term supports but may only be used as an extra help when positioning the user Secure the chair when any adjustments have been made Then place the user on to the Manatee Check on the cover belts and accessories and make sure that the velcro fastens securely WARRANTY R82 offers a 2 year warranty against defects in workmanship and materials The warranty would be adversely affected if the customer s responsibility of servicing and or daily maintenance is not carried out according to the guidelines
Download Pdf Manuals
Related Search