User`s Manual
Contents
1. User s Manual 1 5 1 8 LCD VIDEO BABY MONITOR Contents List 1 Welcome 7 Monitor set up amp operation 2 Warnings 8 AV connection 3 Safety 9 Technical information 4 Product content 10 Trouble shooting 5 Product features 11 Warranty 6 Camera set up amp operation 12 EU Environmental Protection 1 Welcome Congratulations on choosing to buy a Baby product This Baby product is manufactured to the highest standards of performance and safety As part of our philosophy of customer service and satisfaction this product is backed by a comprehensive 1 year warranty We hope you will enjoy using your purchase for many years to come 2 Warning For carefree and safe use of this product please read this manual and safety information carefully and follow all instructions This product is approved to Australian standards Internal manipulation of this product or any modification to this product is forbidden due to safety security and electrical authority approval issues In case of improper usage or if you have opened altered and repaired the product yourself all warranties expire The supplier does not accept responsibility for additional damage other than covered by the legal product responsibility Young children should use the device only under adult supervision No guarantee or liability will be accepted for any damage caused due to incorrect use of the equipment supplied other than indicated in thi2. e after a short period of time if no sound is detected e The camera will switch back to active mode after sound is detected e Use the Voice Control Tune dial 4 to adjust the sensitivity of the voice control feature 8 AV Connection The monitor can be connected to a TV or other visual display by using the AV cable Connect the AV cable 3 5mm jack to the AV output 12 on the monitor Connect the Yellow and red RCA jacks to an AV input on the TV or visual display e Use the colour coding of the RCA jacks to match the colour coding on the TV or visual display Use the AV or source select on the TV or visual display to select the channel that the monitor is connected to and display the image 9 Technical information Camera frequency 2 4GHz Channel frequencies CH1 2414MHz CH2 2432MHz CH3 2450MHz CH4 2468MHz AN modulation method FM Antenna Built in omni directional Image sensors 1 3 coms Effective pixels NTSC 510 h x492 v PAL 628 h x582 v 10 Trouble shooting No picture or sound Lens F6 0mm F1 8 Night vision distance 3 5m Camera power DC6V Monitor Power DC5V or lithium ion battery Operating temperature 0 40 C 32 104 F Monitor frequency 2 4GHz Display inch 1 5 0 1 8 0 Display Full colour Receiver sensitivity 83DBM Recharging time 2 to 3hrs Ensure both the camera and the monitor are turned on Confirm the Power indicator light 4 on the camera and one of the channel lights 5 on the mon
3. itor are lit Make sure low power indicator lights are off e If they are on the batteries need to be recharged If no lights on the camera or monitor come on batteries need to be recharged Adjust the Bri 8 button the brightness may be set to low The monitor may be in standby mode due to the voice control feature e Turn voice control function off using the switch 15 on the monitor or e Adjust the voice control tune 4 on the monitor Image interference This may be caused by other 2 4GHz products operating in the area mobile phones appliances or other electrical devices Change the channel on the camera and monitor to find a channel that is not affected Move the location of the monitor e Ensure that no metal barriers or reinforced concrete walls are between the monitor and the camera Try turning off devices that may be causing interference to identify the device causing the problem we 11 Warranty 1 5 1 8 Baby Monitor is warranted against faulty workmanship for a period of 12 months from the date of purchase Supplier s liability is limited to replacement of the product and claims for associated or consequential loss or damage will not be accepted by supplier s Warranty is void and does not apply if at supplier s discretion the product has been damaged or rendered faulty by accident abuse misuse incorrect application or if the product has been modified or tampered with Proof of purchase i
4. nd monitor can be operated while recharging the battery or left connected to the DC power adaptors for use 6 Camera set up amp operation Connect 6V AC adaptor with 4 Ensure that the channel switch 6 is set to channel 1 Make 8 of the comera fired well Place camera on a firm surface facing the baby up or down to face the baby The camera will automatically switch to night vision in a dark environment When in night vision mode the picture will appear in black and white e Night vision mode will switch off as soon as the camera is exposed to light 7 Monitor set up amp operation Press the power button 1 to turn on Ifthe CH1 LED 5 is not lit press the CH button 10 until it is Ensure that the camera is recharged and turned on The image from the camera will be shown on the monitor Use the Bri 7 amp Bri 8 buttons to adjust the brightness of the image Open the stand 13 and place in a location suitable for viewing Adjust camera to show baby if required Use dial 2 to adjust volume If the image is subject to interference try moving the location of the monitor or changing the transmission channel by pressing the CH button 10 e Once the channel is changed on the monitor it is necessary to change the channel on the camera using the Channel Switch 10 The voice control function can be turned on or off with switch 15 e This function will allow the camera to switch to standby power saving mod
5. s owner s manual and the included warranty card 3 Safety To prevent short circuits this product should only be used inside and only in dry spaces Do not expose the components to rain or humidity This product is designed for use with standard 110v 240v AC power Do not connect to other sources of power Never connect an adaptor or power cord when it is damaged Avoid extreme ambient temperatures and strong vibrations Do not disassemble any part of the product the device contains live parts and no user serviceable parts are inside 4 Product Content Check that you have received the following parts O 1xCamera O 1xAVcable 1xLCD monitor O 1xUser s manual 2xPower adaptors 2x Lithium ion batteries INBUILT NOT SHOWN 5 Product features Camera Infra red led Lens Antenna DC input Light sensor Channel switch Microphone Clip Flexible hose WOMAN AUAWHN Monitor Power button Volume button TFT LCD monitor Voice control tune Channel indicator Low power indicator LED Image Bright Image Dim Charge indicator 10 Channel button a w 11 AC adapter 5V DC input i 12 A V Output y 13 Stand 14 Battery compartment 15 Voice control switch located behind battery ON AU PWD r TND Ge Before use 1 5 1 8 Baby Monitor is pre installed with rechargeable batteries Before use fully recharge the batteries in the Monitor and Camera The camera a
6. s required to validate warranty claims All claims outside the warranty period will be rejected household waste Please recycle where facilities exist Check 12 EU Environmental Protection Waste electrical products should not be disposed of with with your Local Authority or retailer for recycling advice
Download Pdf Manuals
Related Search