Abridged user`s manual
Contents
1. General product care Taking care of your telephone Your cordless telephone contains sophisticated electronic parts so it must be treated with care Avoid rough treatment Place the handset down gently Save the original packing materials to protect your telephone if you ever need to ship it Avoid water Your telephone can be damaged if it gets wet Do not use the handset outdoors in the rain or handle it with wet hands Do not install the telephone base near a sink bathtub or shower Electrical storms Electrical storms can sometimes cause power surges harmful to electronic equipment For your own safety take caution when using electrical appliances during storms Cleaning your telephone Your telephone has a durable plastic casing that should retain its luster for many years Clean it only with a dry non abrasive cloth Do not use dampened cloth or cleaning solvents of any kind Frequently asked questions Below are the questions most frequently asked about the cordless telephone If you cannot find the answer to your question visit our website at www vtechphones com or call 1 800 595 9511 for customer service My telephone does not work at all Make sure the telephone base is installed properly and battery is installed and charged correctly For optimum daily performance return the handset to the telephone base after use The display shows No line cannot hear the dial tone Disconnect the2. NO A 0 While entering names and numbers you can e Press DELETE to backspace and erase a digit or character e Press and hold DELETE to erase the entire entry e Press V or A to move the cursor to the left or right e Press and hold PAUSE to insert a dialing pause for entering numbers only e Press 0 to add a space for entering names only Review a directory entry Entries are sorted alphabetically 1 Press BA when the phone is not in use 2 Scroll to browse through the directory or use the dialing keys to start a name search Delete a directory entry 1 When the desired entry displays press DELETE 2 When the handset displays Delete contact press SELECT Edit a directory entry 1 When the desired entry displays press SELECT 2 Use the dialing keys to edit the number then press SELECT 3 Use the dialing keys to edit the name then press SELECT Dial a directory entry e When the desired entry appears press amp to dial Caller ID If you subscribe to caller ID service information about each caller appears after the first or second ring If you answer a call before the caller information appears on the screen it will not be saved in the caller ID log The caller ID log stores up to 30 entries Each entry has up to 24 digits for the phone number and 15 characters for the name If the telephone number has more that 15 digits only the last 15 digits appear If the name has more th
3. When you received a voicemail the handset displays X and New voicemail To retrieve you typically dial an access number provided by your telephone service provider and then enter a security code Contact your telephone service provider for instructions on how to configure the voicemail settings and listen to messages 9 NOTE e After you have listened to all new voicemail messages the indicators on the handset turn off automatically Turn off the new voicemail indicators If you have retrieved your voicemail while away from home and the handset still displays the new voicemail indicators use this feature to turn off the indicators non This feature turns off the indicators only it does not delete your voicemail messages Press MENU when the phone is not in use Scroll to Settings and then press SELECT Scroll to Clr voicemail and then press SELECT Press SELECT again to confirm Register a handset When your handset is deregistered from the telephone base follow the steps below to register it back to the telephone base 1 Remove the handset from the telephone base 2 Press and hold g FIND HANDSET at the telephone base for about four seconds until the IN USE light turns on Then press on the handset It displays Registering The handset show Registered and you hear a beep when the registration process completes The registration process takes about 60 seconds to complete w N m ie
4. handset is not in use 2 Scroll to Settings and then press SELECT 3 Scroll to choose Key tone then press SELECT 4 Press V or A to choose On or Off then press SELECT to save Ringer tone You can choose from different ringer tones for each handset 1 Press MENU when the handset is not in use 2 Scroll to Ringers and then press SELECT 3 Scroll to choose Ringer tone then press SELECT 4 Press V or A to sample each ringer tone then press SELECT to save S9 NOTE e If you turn off the ringer volume you will not hear ringer tone samples Ringer volume You can adjust the ringer volume level or turn the ringer off 1 Press MENU when the handset is not in use 2 Scroll to Ringers and then press SELECT twice 3 Press V or A to sample each volume level then press SELECT to save f9 NOTE e When the ringer volume is set to Off the handset still rings when you press FIND HANDSET at the telephone base Temporary ringer silencing When the telephone is ringing you can temporarily silence the ringer without disconnecting the call The next call rings normally at the preset volume To silence the handset ringer e Press CANCEL or MUTE The handset displays Ringer muted Retrieve voicemail from telephone service Voicemail is a feature available from most telephone service providers It may be included with your telephone service or may be optional Fees may apply Retrieve voicemail
5. operation or handling neglect inundation fire water or other liquid intrusion 2 Product that has been damaged due to repair alteration or modification by anyone other than an authorized service representative of VTech 3 Product to the extent that the problem experienced is caused by signal conditions network reliability or cable or antenna systems 4 Product to the extent that the problem is caused by use with non VTech accessories 5 Product whose warranty quality stickers product serial number plates or electronic serial numbers have been removed altered or rendered illegible 6 Product purchased used serviced or shipped for repair from outside the United States of America or Canada or used for commercial or institutional purposes including but not limited to Products used for rental purposes 7 Product returned without a valid proof of purchase see item 2 below or 8 Charges for installation or set up adjustment of customer controls and installation or repair of systems outside the unit How do you get warranty service To obtain warranty service in the USA please visit our website at www vtechphones com or call 1 800 595 9511 In Canada go to www vtechcanada com or call 1 800 267 7377 NOTE Before calling for service please review the users manual a check of the Products controls and features may save you a service call Except as provided by applicable law you assume the risk of lo
6. telephone line cord from your telephone and connect it to another telephone If there is no dial tone on that other telephone either then the telephone line cord may be defective Try installing a new telephone line cord If changing the telephone line cord does not help the wall jack or the wiring to this wall jack may be defective Contact your telephone service provider You may be using a new cable or VolP service the existing telephone jacks in your home may no longer work Contact your service provider for solutions While the handset is not in use press MENU and then enter 364 to change the handset LCD language back to English accidentally set my LCD language to Spanish or French and don t know how to change it back to English Limited warranty What does this limited warranty cover The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase Consumer or you that the Product and all accessories provided in the sales package Product are free from defects in material and workmanship pursuant to the following terms and conditions when installed and used normally and in accordance with the Product operating instructions This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada What will VTech do if the Product is not free from defects in materials and workmans
7. trademark of VTech Holdings Limited Specifications are subject to change without notice 2014 VTech Communications Inc All rights reserved 12 14 CS6114 X_ACIB_V5 0 Document order number 91 007041 050 100 Technical specifications Frequency Crystal controlled PLL synthesizer control Transmit 1921 536 1928 448 MHz frequency Channels 5 Nominal Maximum power allowed by effective FCC and IC Actual operating range range may vary according to environmental conditions at the time of use Power Handset 2 4V Ni MH battery requirements Telephone base 6V AC 300mA Charger 6V AC 300mA Memory Directory 30 memory locations up to 30 digits and 15 characters Caller ID log 30 memory locations up to 24 digits and 15 characters
8. Go to www vtechphones com to register your product for enhanced warranty support and the latest VIech product news 800 595 951 08 2138 MUTE REDIAL DELETE PAUSE CS6114 CS6114 11 CS6114 2 DECT 6 0 cordless telephone CD 3 DELETE PAUSE vtech Abridged user s manual Congratulations on purchasing your new VTech product Before using this telephone please read Important safety instructions This abridged user s manual provides you with basic installation and use instructions A limited set of features are described in abbreviated form Please refer to the online user s manual for a full set of installation and operation instructions at www vtechphones com Telephones identified with this logo have reduced noise and interference when used with most T coil equipped hearing aids and cochlear implants The TIA 1083 Compliant Logo is a trademark of the Telecommunications Industry Association Used under license Compatible with Hearing Aid T Coil TIA 1083 What s in the box Your telephone package contains the following items Save your sales receipt and original packaging in the event warranty service is necessary 1 set for CS6114 CS6114 11 2 sets for CS6114 2 Abridged Important user s safety manual instructions Handset overview aw 2 _ 4 O 3 e A EOS r Sa S 9 Lor a ori A E on SZ e 6
9. IND HANDSET at the telephone base OR _ e Press amp or any of the dialing keys on the handset f9 NOTE e Do not press and hold W FIND HANDSET for more than four seconds It may lead to handset deregistration Redial list Each handset stores the last five telephone numbers dialed When there are already five entries the oldest entry is deleted to make room for the new entry Review and dial a redial list entry 1 Press REDIAL when the handset is not in use 2 Press V A or REDIAL repeatedly until the desired entry displays 3 Press amp to dial Delete a redial list entry e When the desired redial entry displays press DELETE The directory can store up to 30 entries which are shared by all handsets Each entry may consist of a telephone number up to 30 digits and a name up to 15 characters Add a directory entry 1 Enter the number when the phone is not in use Press MENU then go to Step 3 OR Press MENU when the phone is not in use then press SELECT to choose Directory Press SELECT again to choose Add contact Use the dialing keys to enter the number OR Copy a number from the redial list by pressing REDIAL and then press V A or REDIAL repeatedly to select a number Press SELECT to copy the number Press SELECT to move on to enter the name Use the dialing keys to enter the name Additional key presses show other characters of that particular key 5 Press SELECT to save
10. N 1 Handset earpiece 2 LCD display 3 VCID VOL e Review the caller ID log when the telephone is not e Scroll down while in a menu or in the directory caller ID log or redial list e Move the cursor to the left when entering numbers or names e Decrease the listening volume during a call 4 FLASH e Make or answer a call e Answer an incoming call when you receive a call waiting alert 5 1 e Press repeatedly to add or remove 1 in front of the caller ID log entry before dialing or saving it to the directory 6 TONE e Switch to tone dialing temporarily during a call 7 MUTE DELETE e Mute the microphone during a call e Silence the handset ringer temporarily while the phone is ringing e Delete the displayed entry while reviewing the directory caller ID log or redial list e Delete digits or characters when entering numbers or names 8 Microphone 9 Charging pole 10 MENU SELECT e Show the menu e While in a menu press to select an item or save an entry or setting 11 AWN VOL e Review the directory when the phone is not in use e Scroll up while in a menu or in the directory caller ID log or redial list e Move the cursor to the right when entering numbers or names e Increase the listening volume during a call 12 OFF CANCEL e Hang up a call e Return to the previous menu or idle mode without making changes e Delete digits while predialing e Silence the hand
11. an 15 characters only the first 15 characters are shown and saved in the caller ID log Review a caller ID log entry 1 Press CID when the phone is not in use 2 Scroll to browse through the caller ID log Missed call indicator When there are calls that have not been reviewed in the caller ID log the handset displays XX missed calls Each time you review a caller ID log entry marked NEW the number of missed calls decreases by one When you have reviewed all the missed calls the missed call indicator no longer displays If you do not want to review the missed calls one by one press and hold CANCEL on the idle handset to erase the missed call indicator All the entries are then considered old Dial a caller ID log entry e When the desired entry appears press to dial Save a caller ID log entry to the directory 1 When the desired caller ID log entry displays press SELECT 2 Use the dialing keys to modify the number if necessary Then press SELECT 3 Use the dialing keys to modify the name if necessary Then press SELECT Delete the caller ID log entries e When the desired caller ID log entry displays press DELETE To delete all caller ID log entries 1 Press MENU when the phone is not in use 2 Scroll to Caller ID log and then press SELECT 3 Scroll to Del all calls then press SELECT twice Sound settings Key tone You can turn the key tone on or off 1 Press MENU when the
12. harge the battery provided with this product only in accordance with the instructions and limitations specified in this manual e If the handset will not be used for a long time disconnect and remove the battery to prevent possible leakage Charge the battery Place the handset in the telephone base or the charger to charge Once you have installed the battery the handset LCD display indicates the battery status see the table below f9 NOTES e For best performance keep the handset in the telephone base or charger when not in use e The battery is fully charged after 16 hours of continuous charging e f you place the handset in the telephone base or the charger without plugging in the battery the screen displays No battery Battery indicators Battery status The screen is blank or displays Put in charger and flashes The battery has no or very little charge The handset cannot be used Charge without interruption at least 30 minutes The screen displays The battery has enough charge to be used for a short time Charge without interruption about 30 minutes Low battery and flashes The screen displays HANDSET X The battery is charged To keep the battery charged place it in the telephone base or charger when not in use Before use After you install your telephone or power returns following a power outage the handset will prompt you
13. hip during the limited warranty period Materially Defective Product During the limited warranty period VTech s authorized service representative will repair or replace at VTech s option without charge a Materially Defective Product If we repair the Product we may use new or refurbished replacement parts If we choose to replace the Product we may replace it with a new or refurbished Product of the same or similar design We will retain defective parts modules or equipment Repair or replacement of the Product at VTech s option is your exclusive remedy VTech will return the repaired or replacement Products to you in working condition You should expect the repair or replacement to take approximately 30 days How long is the limited warranty period The limited warranty period for the Product extends for ONE 1 YEAR from the date of purchase If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty this limited warranty also applies to the repaired or replacement Product for a period of either a 90 days from the date the repaired or replacement Product is shipped to you or b the time remaining on the original one year warranty whichever is longer What is not covered by this limited warranty This limited warranty does not cover 1 Product that has been subjected to misuse accident shipping or other physical damage improper installation abnormal
14. ng a telephone conversation there may be interference To improve reception move closer to the telephone base Use the handset menu Press MENU when the phone is not in use Press V or A until the screen displays the desired feature menu Press SELECT e To return to the previous menu press CANCEL e To return to idle mode press and hold CANCEL Configure your telephone Set language The LCD language is preset to English You can select English French or Spanish to be used in all screen displays 1 Press MENU when the handset is not in use 2 Scroll to Settings then press SELECT twice 3 Scroll to choose English Fran ais or Espa ol 4 Press SELECT twice to save your setting N iS Set date and time 1 Press MENU on the handset when not in use 2 Scroll to Set date time and then press SELECT Use the dialing keys 0 9 to enter the month MM date DD and year YY Then press SELECT Use the dialing keys 0 9 to enter the hour HH and minute MM Then press V or A to choose AM or PM 5 Press SELECT oO D Temporary tone dialing If you have pulse rotary service only you can switch from pulse to touch tone dialing temporarily during a call 1 During a call press TONEX 2 Use the dialing keys to enter the relevant number The telephone sends touch tone signals It automatically returns to pulse dialing mode after you end the call Telephone opera
15. set ringer temporarily while the phone is ringing e Erase the missed call indicator while the handset is not in use 13 0 OPER e Enter space character during text editing 14 e Show other dialing options when reviewing a caller ID log entry 15 REDIAL PAUSE e Review the redial list e Insert a dialing pause while dialing or entering numbers into the directory 16 Battery compartment cover Telephone base overview 1 B FIND HANDSET e Page all system handsets 2 Charging pole 1 Charging pole Display icons overview You can choose to connect the telephone base for desktop usage or wall mounting NOTES Use only the adapters provided e Make sure the electrical outlets are not controlled by wall switches e The adapters are intended to be correctly oriented in a vertical or floor mount position The prongs are not designed to hold the plug in place if it is plugged into a ceiling under the table or cabinet outlet KATIP e If you subscribe to digital subscriber line DSL high speed Internet service through your telephone line make sure you install a DSL filter not included between the telephone line cord and telephone wall jack Contact your DSL service provider for more information Mount the telephone base Install and charge the battery Install the battery Install the battery as shown below f9 NOTES Use only supplied battery e C
16. ss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product s to the service location VTech will return repaired or replaced Product under this limited warranty Transportation delivery or handling charges are prepaid VTech assumes no risk for damage or loss of the Product in transit If the Product failure is not covered by this limited warranty or proof of purchase does not meet the terms of this limited warranty VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty What must you return with the Product to get warranty service 1 Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty and 2 Include a valid proof of purchase sales receipt identifying the Product purchased Product model and the date of purchase or receipt and 3 Provide your name complete and correct mailing address and telephone number Other limitations This warranty is the complete and exclusive agreement between you and VTech It supersedes all other written or oral communications related to this Product VTech provides no other warranties for this Product The
17. tions DELETE Make a call e Press and then dial the telephone number Answer a call e Press or any of the dialing keys End a call e Press OFF or put the handset back in the telephone base or charger Volume e During a call press VOL or VOL to adjust the listening volume Mute The mute function allows you to hear the other party but the other party cannot hear you 1 During a call press MUTE The handset displays Muted 2 Press MUTE again to resume the conversation The handset displays Microphone on briefly Join a callin progress for multiple handset models only You can use three handsets at a time on an outside call e When a handset is already on a call press amp on another handset to join the call e To exit the call press OFF on the handset or place it in the telephone base or charger The call continues until all handsets hang up Call waiting When you subscribe to call waiting service from your telephone service provider you hear an alert tone if there is an incoming call while you are already on a call e Press FLASH to put the current call on hold and take the new call e Press FLASH at any time to switch back and forth between calls Find handset Use this feature to find the system handset To start paging e Press amp FIND HANDSET on the telephone base when not in use All idle handsets ring and display Paging To end paging e Press F
18. to set the date and time Set date and time 1 Use the dialing keys 0 9 to enter the month MM date DD and year YY Then press SELECT 2 Use the dialing keys 0 9 to enter the hour HH and minute MM Then press V or A to choose AM or PM 3 Press SELECT to save Check for dial tone Press amp If you hear a dial tone the installation is successful If you do not hear a dial tone e Make sure the installation procedures described above are properly done e It may be a wiring problem If you have changed your telephone service to digital service from a cable company or a VoIP service provider the telephone line may need to be rewired to allow all existing telephone jacks to work Contact your cable VoIP service provider for more information Operating range This cordless telephone operates with the maximum power allowed by the Federal Communications Commission FCC Even so this handset and telephone base can communicate over only a certain distance which can vary with the locations of the telephone base and handset the weather and the layout of your home or office When the handset is out of range the handset displays Out of range or no pwr at base If there is a call while the handset is out of range it may not ring or if it does ring the call may not connect well when you press Move closer to the telephone base then press to answer the call If the handset moves out of range duri
19. warranty exclusively describes all of VTech s responsibilities regarding the Product There are no other express warranties No one is authorized to make modifications to this limited warranty and you should not rely on any such modification State Provincial Law Rights This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province Limitations Implied warranties including those of fitness for a particular purpose and merchantability an unwritten warranty that the Product is fit for ordinary use are limited to one year from the date of purchase Some states provinces do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you In no event shall VTech be liable for any indirect special incidental consequential or similar damages including but not limited to lost profits or revenue inability to use the Product or other associated equipment the cost of substitute equipment and claims by third parties resulting from the use of this Product Some states provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you Please retain your original sales receipt as proof of purchase Designed to fit your home And yout life VTech Communications Inc A member of THE VTECH GROUP OF COMPANIES VTech is a registered
Download Pdf Manuals
Related Search