QX12AV, QX15AV Active Speakers with VHF
Contents
1. E qtx QX12AV QX15AV Active Speakers with VHF Order ref QX12AV 178 612 QX15AV 178 615 User Manual www avsl qtx com VERSION 1 an enyd group brand E qtx Introduction Thank you for choosing this QXAV series active cabinet Please read this manual prior to use to avoid damage through misuse This compact and powerful active speaker has dual VHF receivers with a handheld transmitter and bodypack transmitter for use as a single wireless unit or as part of a VHF array for conferences and other events Package Contents Please check the contents to ensure that the product has been received in good condition QXAV active speaker IEC mains power lead s 1 x VHF handheld microphone 1 x VHF bodypack transmitter amp 3 5mm aux lead 2 x 9V battery PP3 If you find any accessory is missing or the product has arrived with any problems please contact your retailer at once This product contains no user serviceable parts so make no attempt to try to fix or modify this item yourself as this will invalidate the warranty We recommend you keep the original package and proof of purchase for any possible replacement or returned demand Warning To prevent the risk of fire or electric shock do not expose this appliance to rain or moisture and avoid ingress of water into the enclosure To prevent electric shock do not remove the cover No user serviceable parts inside Refer servicing to qualified service personnel Safety P2. he handheld unit testing for output through the speaker Take care not to incur feedback howling or screeching sound through the speaker by keeping the microphone a sensible distance from the speaker and pointing away from the speaker so that it doesnt hear the speaker output Repeat the process for the bodypack transmitter ensuring that the level control on the bodypack is turned up and there is a signal playing through it When not in use switch the wireless microphones off Specifications po KRAVE OQXI5SN yS 25mm 1 titanium compression driver 174 1MHz 175 0MHz Output power RMS 200W 250W Output power Max 400W 500W Dimensions 350 x 565 x 325mm 430 x 680 x 370mm Oo y y O7eg Yo Weight 13 2kg 17 8kg Troubleshooting Check POWER switch is on No output and no LEDs lit Check mains lead is connected Check mains fuse hasn t blown Check 9V batteries in wireless transmitters Power LED lit but no VHF Check wireless transmitters are switched on Check VHF POWER is switched on output Power LED lit but no sound from external inputs sE DISPOSAL AD Please dispose of the unserviceable device according to the current statutory requirement Errors and omissions excepted Copyright 2013 AVSL Group Ltd 178 612 178 615 User Manual
3. level signal Tone shaping is available by adjusting the BASS and TREBLE controls and master level is governed by the VOLUME rotary control A line level output can be used to link onto other equipment via the OUTPUT XLR connector Ensure that volume controls are turned down before powering down and unplug from the mains when not in use for long periods VHF Wireless Microphones Insert the supplied 9V battery into the handheld microphone by carefully unscrewing the base and connecting the and terminals of the battery to the corresponding clips inside the microphone body taking care to observe the correct polarity Slide open the bodypack and insert the supplied 9V battery again observing the correct polarity Connect the threaded end of the supplied 3 5mm jack lead to the bodypack transmitter and the other stereo connector to a playback device or other line output source If preferred the bodypack may be used with an appropriate lavalier or neckband microphone such as 171 855UK 171 856UK or 171 857UK With the VOL A and VOL B controls turned down press the VHF ON OFF button in so that the VHF POWER LED lights Switch on each wireless transmitter in turn the RF LEDs should light as a result If the LED on the transmitter lights dimly change the battery Note the switch on each transmitter has a midway MUTE position switch fully on for testing 178 612 178 615 User Manual E qtx Gradually increase VOL control of t
4. rior to connecting mains ensure that the supply voltage is correct and the mains lead is in good condition If the mains fuse blows refer the unit to qualified service personnel If the VHF microphones are to be unused for a long period of time remove the batteries Placement Keep the unit out of direct sunlight and away from heat sources Place the unit in an upright position during use and storage Keep the unit away from moisture or dusty environments Cleaning Use a soft cloth with a neutral detergent to clean the cabinet panel and controls To avoid damage do not use solvents to clean this equipment 178 612 178 615 User Manual E qtx Rear Panel 123 4 5 6 RF indicator Ch A Volume control Ch A RF indicator Ch B Volume control Ch B VHF system power indicator VHF system on off switch 6 3mm jack line input XLRF line input XLRM line output 10 Bass EQ control 11 Treble EQ control 12 Master volume control VHF WIRE_ESS Ml ROPHC NE CONTROLS 0 0 REA RFB VOLA VOL B INPUT BAL OUTPUT r f BASS TREBLE VOLUME oP A Se a Operation Connect the QR series portable PA unit to the mains using the appropriate mains IEC lead supplied With the VOLUME controls down anti clockwise turn the POWER switch on BASS and TREBLE controls should remain pointing vertically 12 0 clock position A 6 3mm jack or XLR line input is provided to connect a line input This can accept balanced or unbalanced line
Download Pdf Manuals
Related Search