Heavy Duty station
Contents
1. Clean periodically 2 Press the new fuse into the fuse holder and replace it in the station Replace any defective or damaged pieces Use original JBC spare parts only Repairs should only be performed by a JBC authorized technical service 14 15 Safety It is imperative to follow safety guidelines to prevent electric Do not use the units for any purpose other than soldering or rework Incorrect use may cause fire shock injury fire or explosion The power cord must be plugged into approved bases Be sure that it is properly grounded before use When unplugging it hold the plug not the wire Do not work on electrically live parts The tool should be placed in the stand when not in use in order to activate the sleep mode The soldering tip the metal part of the tool and the stand may still be hot even when the station is turned off Handle with care including when adjusting the stand position Do not leave the appliance unattended when it is on Do not cover the ventilation grills Heat can cause inflamable products to ignite Use a non residue classified flux and avoid contact with skin or eyes to prevent irritation Be careful with the fumes produced when soldering Keep your workplace clean and tidy Wear appropriate protective glasses and gloves when working to avoid personal harm Utmost care must be taken with liquid tin waste which can cause burns2. Once the cartridge is properly inserted we recommend tightening the screw to prevent moving Important It is essential to insert the cartridges as far as the mark for a good connection Compatible cartridges The HDE A works with C470 cartridges and 1470 handles Find the model that best suits your soldering needs in www jbctools com Hound Chisel Hound bent Bevel Special models www jbctools com Compatible Soldering Iron Handles 7470 Handles for Heavy Duty Use C470 Cartridge range For intensive soldering jobs requiring continued high thermal power They feature a non slip grip with a good thermal insulation and a screw which fixes the cartridge and prevents rotation General Purpose HD Handle General Purpose HD Handle with 3m cable Ref T470 A Ref T470 SA Tri lobed Handle Ref T470 ZA For better handling of the tool Thermal Insulator HD Handle Thermal Insulator HD Handle with 3m cable Ref 1470 FA Ref 1470 MA T470 FA dl E Note All models are supplied with a 1 5m cable except those specified with 3m Operation The JBC Exclusive Heating System This revolutionary technology is able to recover tip temperature extremely quickly It allows the user to work at a lower temperature and improve the quality of soldering The tip temperature is further reduced thanks to the Sleep and Hibernation modes which increase the tip life by 5 1 Work When the tool is lifted from the
3. This appliance can be used by children over the age of eight and also persons with reduced physical sensory or mental capabilities or lack of experience provided that they have been given adequate supervision or instruction concerning use of the appliance and understand the hazards involved Children must not play with the appliance Maintenance must not be carried out by children unless supervised www jbctools com Specifications HDE 1A 120V 50 60Hz Input fuse 4A Output 47V HDE 2A 230V 50 60Hz Input fuse 2A Output 47V HDE 9A 100V 50 60Hz Input fuse 4A Output 47V Weight 5 9 Kg 13 1 Ib Dimensions 145 x 120 x 225mm Output Peak Power 250W Temperature Range 90 500 C 190 932 F Idle Temp Stability still air 1 5 C 3 F Tip to ground resistance 2 ohms Tip to ground voltage 2mV RMS Ambient Operating Temperature 10 40 C 50 104 F USB A USB B Peripherals connectors RJ12 connector for Robot Complies with CE standards ESD protected housing skin effect 16 17 www jbctools com 0100 20 000 3 vs L ISNA AO0L W6 30H Vc L 35014 AOEZ VC 30H 3804 AZL ELYELOO MOVE 1588100 AW1dSIG LNOUWS UO 19St L00 WOLLOS 0 S 0L100 dOL O 3YNSOTONI O 6S0 L00 LINOZIO NV33 O W6 30H VZ 3aH VL 30H 17 SLUWd 3HVdS N E8ZLLOO X V6 30H VC 3GH VL 3O0H
4. stand the tip will heat up to the selected temperature Selected 350 C Tools Menu Set temperature limits Select temperature levels 2 Sleep When the tool is in the stand the temperature falls to 180 C 360 F preset sleep temperature T470 Sleep Tool in the stand Actual Temp 180 C Delay to hibernation 29 30 P ort 2 Tools Menu Set Sleep temperature Set Sleep delay from O to 9 min or no Sleep 3 Hibernation Long time in the stand After longer periods of inactivity pre set to 30 min the power is cut off and the tool cools down to room temperature 9 17 14 7470 Hibernation Actual Temp 25 C Port Tools Menu Set Hibernation delay from O to 60 min or no hibernation Work Screen www jbctools com The HDE A offers an intuitive user interface which provides quick access to the station parameters Status Bar Tool in use 4 ANGI Temp Levels indicator Displayed if temperature ___ levels are Giuli activated aun Information Change port Menu Options Press INFO for each parameter description System notifications Status Bar USB flash drive is connected ch is ab Station Tools Counters ys 5 O Peripherals Graphics Reset Station is controlled by a PC otation is controlled by a robot C Station software update Press INFO to start the pr
5. NIE NOILVLS ALNG AAV3H AOOL V6 30H Ive 688100 AOZL VL 30H 19 18 Warranty JBC s 2 year warranty covers this equipment against all manufacturing defects including the replacement of defective parts and labour Warranty does not cover product wear due to use or mis use In order for the warranty to be valid equipment must be returned postage paid to the dealer where it was purchased This product should not be thrown in the garbage In accordance with the European directive 2002 96 EC electronic equipment at the end of their life mmm must be collected and returned to an authorized recycling facility www jbctools com 0013170 0215
6. ng area free of cable Quick tip changer The cartridge extractor inserter system permits switching cartridges without interrupting your work Adjustable tool holder Suits your work position Adjustable cable collector Tip Cleaner www jbctools com Improve thermal transfer by cleaning the tip after each solder joint Brass wool Hef CL6210 Sponge Ref 50354 Very effective cleaning method It leaves a small layer of solder on the tip to prevent oxidation between cleaning and rewetting Splashguard It minimises splashing of solder particles when using the brass wool Wiper Ref CLO236 A temperature resistant receptacle lets the operator remove excess solder by gently tapping or wiping It can be easily removed for cleaning Optional Inox wool Brushes Ref CL6205 Ref CL6220 The least harmful cleaning method Keep the sponge damp with distilled water when working to avoid tip wear Non slip base No need to hold the base while cleaning tips Tapping Wiping Tap gently to remove Use the slots to excess solder remove remaining particles Tip tinner Sand Ref TT A Ref CL6211 Changing cartridges 1 Removing Untighten Untighten the screw Place the Soldering Iron in the extractor and remove the cartridge 3 Fixing 2 Inserting Insert the cartridge and press slightly until the mark
7. o iS C www jbctools com English Heavy Duty station Ref HDE A E www jbctools com Packing List The following items should be included HDE Control 1 unit Stand e 1 unit Ref HDE 1A 120V Ref HD SD HDE 2A 230V HDE 9A 100V General purpose HD Tip Cleaner 1 unit Sponge 1 unit Handle 1 unit Hef CL9885 Ref 50354 Ref T470 A oy OW Stand Cable 1 unit Power cord 1 unit Manual 1 unit Ref 0011283 Ref 0010569 230V Ref 0013170 0013671 100 120V Heavy Duty station Ref HDE A Features HDE Control Unit WS www bctools com HDE 2A Control Unit 230V 50 60Hz Rated 0 9 A Fuse T2A Equipotential connection USB B connector Power Socket Peripheral connector RJ12 connector for joining modules for Robot system and pedals ooo C470 cartridges Required but not supplied General purpose HD Handle Ref T470 A Stand Ref HD SD E www jbctools com USB A connector 2 8 Color TFT screen with capacitive keyboard Tilt the display for easy reading Compatible Peripherals Join the station port with 1 module and 1 pedal See below the compatible peripherals Fume Extractor Switch Pedal Ref FSE A Hef P 005 Adjustable Stand Cable collector Keeps worki
8. ocess Warning Press INFO for failure description b Error Press INFO for failure description the type of error and how to proceed 10 11 www jbctools com Process analysis Soldering Net By pressing Graphics in the main MENU temperature and power responses in Remotely manage and monitor as many stations as your Windows PC can handle real time are displayed for each port This helps you decide which the proper tip is for every soldering job and the quality of the solder joint 1 Download the JBC Manager software and the user manual from www jbctools com manager html 2 Connect the stations via USB B connector and the PC will automatically detect them 3 The notification B will be displayed on the station Graphics Functions Set all the station parameters from your PC Organize groups of stations and set all their parameters at the same time Store specific configurations for later uses Analyze the soldering graphics of the stations on your PC and export them Power Temperature JBG Manager software See other port graphic Export graphics Insert a USB flash drive into the USB A connector to start saving your soldering any JBC process in csv format station 12 13 Working with Robots Manage and monitor the station using a Robotic system 1 Connect the tool to the station port by means of the Converter 2 Connect your Robot
9. system to the Robot connector RJ12 of the station DB9 RJ12 Adapater available only if necessary Ref 0013772 3 Enable the Robot option in the station settings and the notification will be displayed 4 Set your Robot s commands according to the Robot Communication Protocol available on the website www jbctools com jbcsoftware menu 115 html Converter Ref 0002747 HDE Control Unit RS 232 connection Update the station software 1 Download the JBC Update file from 2 Insert the USB flash drive www jbctools com software html and save The icon db is diplayed while updating it on a USB flash drive Preferably one with no other files JBC Update file Maintenance www jbctools com Before carrying out maintenance or storage always allow the equipment to cool Clean the station screen with a glass cleaner or a damp cloth Use a damp cloth to clean the casing and the tool Alcohol can only be used to clean the metal parts Periodically check that the metal parts of the tool and stand are clean so that the station can detect the tool status Maintain tip surface clean and tinned prior to storage in order to avoid tip oxidation Rusty and dirty surfaces reduce heat transfer to the solder joint Periodically check all cables and tubes Replace a blown fuse as follows 9 1 Pull off the fuse holder and remove the fuse If necessary use a tool to lever it off
Download Pdf Manuals
Related Search