decrypta 1
Contents
1. to choose and continue to next menu Enabling clear zero Gi to select from yes or no to choose and continue to next menu Enabling Extended compressed S to select from yes or no to choose and continue to next menu O hoosing listen in code S to select from 1 to 9 Ato F 0 empty to choose and continue to next menu O heck printer buzzer mode S to select from yes or no to choose and continue to next menu Handshake order configuration to select from 1to 7 1 1400hx VFSK 2 SIA CFSK 3 Dual 1400Hz 2300Hz 4 2300hz 5 Stratel 6 Telim on Telim models only 7 Robofon on Robofon models only to choose and continue to next menu Wait after off hook option to select from no or yes 4 5 seconds delay to choose and continue to next menu MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal QC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 O eratin Page 10 uide for Alarm Receiver DECRYPTA Enabling CALLER ID to PC to select from yes or no to choose and continue to next menu Enabling CALLER ID to printer 8 to select from yes or no to choose and continue to next menu Enabling CALLER ID to pc and printer Qe to select from yes or no to choose and continue to next menu D ending date and time option 8 to select from yes or no to choose and continue to next menu Delay time for a2. 16 EN41003 Warning Application Note 48 eueb EEN 16 Techhical data sheet for DECH KT nn inna ANN NEEN aaa maata AAA 18 Desenpionyad kaa AT TT MA r An naa senda ana nan da ia adan Ap a Features Specifications MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 Page 2 Operating guide for Alarm Receiver DECRYPTA Alarm Receiver DECRYPTA The twin line alarm receiver card DECRYPTA for PC and PC compatible computers is a MCDI product It carries a five year limited warranty Physical characteristics of DECRYPTA SizeSizeSize Receiver has all out dimensions 15 L x 5 5 W x 2 H 38 cm L x 14 cm W x 5 cm H Housing Rugged aluminum chassis Baked black enamel finish or nickel plating finish Buffer memory Buffer holds up to 800 events in Native mode 1000 in Ademco emulation Mode Buffer is used when computer is absent Unit keeps printing during fail time if power is connected and maintained When computer comes back on buffer empties to the computer If more than 800 events 1000 Ademco mode are received in the buffer during fail time DECRYPTA writes over the oldest event Written records may be available on printer connected to parallel printer port Printer port Connector port for IBM compatible parallel printer type DB25 One printer can be used for all DECRYPTA linked by cables MRDC2 or MRDC3 instead of one printer
3. CALLER ID NATIVE FORMAT LINE 1 TIME AND DATE LINE 2 RECEIVER AND LINE NUMBER SIGNAL FROM PANNEL LINE 3 CALLER ID INFORMATION SIA CALLER ID NATIVE FORMAT LINE 1 TIME AND DATE LINE 2 RECEIVER AND LINE NUMBER SIGNAL FROM PANNEL LINE 3 CALLER ID INFORMATION MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 Page 12 Operating guide for Alarm Receiver DECRYPTA Formats and characters transmitted Receiving Formats MCDI DTMF FSK Acron Ademeco Contact ID Ademco L S Standard Ademco L S expanded Ademco Fast High Speed Ademco Express Ademco Old DCI FBI Super Fast Franklin Fast Napco Radionics Standard Radionics Expanded Scantronic Sescoa standard Sescoa SS SIA 1l Ill Silent Knight Slow Fast CFSK III Varitech VFSK Stratel SurGard Robofon Telim Pulse 10 20 40 bps 3x1 4x1 4x2 Dual Round 10 20 40 bps 4x2 Checksum 10 20 40 bps 3x1 4x1 Extended Dual Round Frequencies 1800 Hz 1900 Hz Handshake and kissoff 1400hz 2300hz DTMF 10 char sec FSK 110 bauds or 300 bauds SIA CFSK VFSK Bell 103 Listen in Two way voice Listen in function Some alarm panels offer the option for the Central station operator to listen for sound in the premises where the alarm signal originates Alarm panels supporting Listen in keep the telephone line open after having sent a signal to allow sound monitoring The telephone line will be
4. SIA E Function block code SIA Data code packet separator SIA lt LF gt Line Feed DECRYPTA Error and Warning messages sent to Pinrter port and PC HH MM MM DDIYY RL Account XYY Printer message Time Date Receiver 0000 01 Printer error Time Date Receiver 0000 02 Printer reset Telephone line monitoring Time Date Receiver 0000 08 Error Line 1 Time Date Receiver 0000 04 Reset Line 1 Telephone line monitoring Time Date Receiver 0000 05 Error Line2 Time Date Receiver 0000 06 Reset Line2 External battery backup Time Date Receiver 0000 07 Low external battery Time Date Receiver 0000 08 Normal external battery CMOS RAM battery Time Date Receiver 0000 09 Low CMOS battery Time Date Receiver 0000 OB Normal CMOS battery Transmission message Time Date Receiver 0000 00 Bad transmission Time Date Receiver 0000JA BAD TRANSMISSION Format SIA No Transmission Time Date Receiver 0000 F1 No signal received Line 1 Time Date Receiver 0000 F2 No signal received Line 2 Transmission to computer and printer in ADEMCO 685 Surgard emulation mode User Manual for information on transmission See ADEMCO 685 standards User Manual for information on transmission See Surgard MRL2 documentation Surgard emulation applies to Dial up Alarm signals and Telephone ID Messages from DECRYPTA to DECRYPTA printer port When computer ceases to answer Computer absent is sent to DECRYPTA parallel port When computer answers Computer restore i
5. To close communication with alarm signal site after 180 seconds of event reception simply hang up the telephone This is because the DECRYPTA is not in function anymore its delay having expired Transmission to computer and printer in DECRYPTA Native mode Pulse DTMF FSK FORMAT 3x1 4x1 Hmm MWDD VYYJ RL CCCC GA lt CR gt Default Hmm MMW DD YY RL CCCC A lt CR gt Option 4x1 set by INITLR Hmm MM DDI YY RL CCC A lt CR gt Option 3x1 set by INITLR Hmm MM DDIYY RL GCCC AZ lt CR gt Option 3x1 extended compressed 4x2 MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 Page 13 Operating guide for Alarm Receiver DECRYPTA HH mm__MM DD YY _ _ RL CCCC AZ lt CR gt FORMAT 4x2 HH mm__MM DD YY ___RL_CCCC_AZ lt CR gt FORMAT 4x3 SESCOA SS HH mm__MM DD YY ___RL_CCCC_AZZ Z lt CR gt FORMAT 4x3 SUR GARD HH mm__MM DD YY ___RL_CCCC_AZZ lt CR gt FORMAT ADEMCO HIGH SPEED HH mm__MM DD YY __RL_CCCC_AAAA_AAAA_A lt CR gt FORMAT ACRON HH mm__MM DDI YY ___RL_CCCC_AAAAAAAA lt CR gt HH mm__MM DDI YY _RL__CCC_AAAAAAAA lt CR gt FORMAT FBI SUPER FAST HH mm__MM DD YY ___RL_CCCC_EZZ lt CR gt FORMAT CONTACT ID HH mm__MM DDI YY FORMAT MODEM SIA HH mm__MM DD YY __RL_ CCCCCC EAAZZZ AAZZZ AAZZZ lt LF gt RL_ CCCCCC EAAZZZ AAZZZ AAZZZ lt CR gt FORMAT MODEM CFSK VFSK HH mm__MM DD YY __ RL_CCCC_AZ lt CR gt CALLER ID RL_CCC
6. a sequential pile and displayed on screen MCDI Inc 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Features Mobile without need of reconfiguration Internal buffer 800 to 1000 events CMOS Lithium battery for non volatile memory Supports SIA BFSK CSFK VFSK etc Caller ID option Supports software retransmit function Alert Warning buzzer for operation without PC Acknowledge functionon front panel Dead line detection and operation status on front panel Printer status on front panel Interface with wireless phone terminals around the world Listen in Two way voice Size and construction Size 15 L x 5 5 W x 2 H 38 cm L x 14 cm W x 5 cm H Housing Rugged aluminum chassis Baked black enamel finish Nickel plated silver finish on special order Monitoring Software DECRYPTA interfaces with Monitoring software in Native mode Ademco 685 emulation mode and SurGard emulation mode Compatible with most automation software on the market Configuration 1 parallel port DB25 for printer 1 serial port for connection to computer 1 port DB9 for linking DECRYPTAs 2 RJ11 telephone line jacks 5 status LED on front panel Configurable by PC 286 or up or directly on front panel Configuration software included Four sealed controls on front panel Display Displays incoming signals or controls on 4 lines by 24 characte
7. for the DECRYPTA receiver are From External Battery standby 12V 1A 2 Itis essential that when other option cards are introduced which use or generate a hazardous voltage the minimum creepages and clearances specified in the table below are maintained A hazardous voltage is one which exceeds 42 4V peak a c or 60V d c If you have any doubt seek advice from a competent engineer before installing other adapters into the host eguipment 3 The equipment must be installed such that with the exception of the connections to the host clearance and creepage distances shown in the table below are maintained between the card and any other assemblies which use or generate a voltage shown in the table below The larger distance shown in brackets applies where the local environment within the host is subject to conductive pollution or dry non conductive pollution which could become conductive due to condensation Failure to maintain these minimum distances would invalidate the approval 4 The analogue telecommunications interface is intended to be connected to telecommunication network voltage TNV circuits which may carry dangerous voltages The telephone cord s must be disconnected from the telecommunications system until the card has been installed within a host which provides the necessary protection of the operator If it is subsequently desired to open the host equipment for any reason the telephone cord s must be disconnected prior to effecting ac
8. per DECRYPTA unit Events are also displayed on last DECRYPTA for all units Phone jack Double Phone connector type RJ11 on Rev 4 and Rev 5 Connect Green and Red only on each connector Power connector A twelve 12 volt power input connector is located at the back of DECRYPTA A 3 foot wire is supplied Connect red wire to positive side and black wire to negative side of power source Alert WarningBuzzer On board buzzer is available for alert warning when Computer is absent Enable if setup parameter Check printer is set to Yes Is activated start buzzing by event to be printed on DECRYPTA printer port Stop buzzing by pressing twice 2 ON LINE printer key Refer to printer connected to DECRYPTA parallel printer port Will resume buzzing if printer is left off line CMOS Lithium battery Receiver memory function support depends on CMOS battery CMOS battery is located on receiver position BT1 Renata Model CR2430 or equivalent Minimum life expectancy 7 years to 10 years Shelf life 4 months Software tool COMIRQ COMIRQ is a DOS software program shipped with all receivers It is used to check signals sent to PC by DECRYPTA This tool is very useful to find free IRQ To check installation and find free IRQ run COMIRQ followed by COM IRQ parameters Example COMIRQ 3 5 Check if IRQ 5 is free for a DECRYPTA installed on COM3 When COMIRA is displayed send a signal to DECRYPTA where same setup parameters have been given Signal is disp
9. 45 Example 3x1 Standard 3 x 1 1231 Example 4x1 Standard 4 x 1 12341 Example 3x1and4x1 without the CLEAR ZERO option 0123 01 for 3 x 1 1234 01 for 4x 1 Compressed Yes Compressed extended 3x1 or 4x1 No default Extended Example 3x1 Extended compressed in 4 x 2 standard 1234 4445 After compression 012345 Example 4x1 Extended compressed in 4 x 2 standard 12345 55556 After compression 123456 Listen In Empty or 1 F MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal QC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 Page 6 Operating guide for Alarm Receiver DECRYPTA 3x1 4x2 Define code to trigger Listen In mode in 3x1 or 4x2 formats Printer Buzzer Yes Check printer on DECRYPTA port No Do not check for printer default By default DECRYPTA does not verify printer status on parallel port but sends data to be printed as if a printer was connected to this port Yes option tells the DECRYPTA receiver to verify and report on the status of the printer connected to the DECRYPTA parallel port The status verification applies to the DECRYPTA lowest COM in the computer if more than one MCDI receiver is installed A connector is needed to daisy chain multiple DECRYPTA receivers to send all output to one printer only When Check printer option is enabled Yes and the computer is absent each event being sent to printer triggers a warning buzzer This warning sound may be stopped by click
10. C_18_TAAA_GG_ZZZ lt CR gt same as 4x2 Phone signal added to event code Examples HH mm__MM DDI YY ___RL_CCCC_AZ t t lt CR gt HH mm__MM DDI YY RL CCCC 18 TAAA GG ZZZ tt t lt CR gt HH mm__MM DD YY __ RL HCCCCCC EAAZZZ AAZZZ AAZZZ Heartbeat lt CR gt Code definitions HH Hour Character mm Minute DD Day A 1 space oP 2 spaces MM Month YY Year Present Absent Character R Receiver number L Line number C Account number A Event code or modifier E Zone type Z Zone G Group Partition T Type E or R Zero MCDI Inc 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Option 4x1 extended compressed 4x2 Option zero removed 3x1 4x1 extended lt CR gt Native mode Ademco685 Emulation Added to 4x2 Added to Contact ID t t lt CR gt Added to SIA Signal sent to the computer every 30 seconds if option is enabled Receiver Option Receiver Option Receiver Option FBI super Fast Contact ID Internet http www mcdi com Telephone 514 481 1067 Fax 514 481 1487 Page 14 Operating guide for Alarm Receiver DECRYPTA lt CR gt EOS Carriage Return lt ACK gt Data retransmits to computer every 2 second until ACK is received by DECRYPTA ACK 06H or 06 Heartbeat signal Receiver Option t t Telephone number from Caller ID Beginning data delimiter SIA Ending data delimiter SIA Field separator SIA Account ID block code
11. MCDI DECRYPTA ALARM RECEIVER v001211 MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal AC Canada H3X 2L1 Telephone 514 481 1067 Fax 514 481 1487 Page 1 Operating guide for Alarm Receiver DECRYPTA Contents Alarm Receiver DECR YP TA sni ena aan kaes AMMAS AADAMA UA AAA AA UA AMMAS AAA AA 2 Physical characteristics of DECHRVPTA EEN 2 SE eege AN A UU Ee dee 2 Buffer memory 2 Printer port 2 Phone jack 2 Power connector 2 Buzzer Alert Warning 2 CMOS Lithium battery Se rss EE 2 Software tool COMIRG Auen 2 Installing DECRYPTA receiver ooooo ooooooo oom Woman 3 Configdring DEGRY PTA Mee 3 Physical characteristics of DECRYPTA Haa nn eee nwa ase EE an 3 Setting up DECRYPTA Firmware Version BI bi EEN 4 Transmission CEET 6 Formats and characters tranSMitted o o oo a daaa AAA AA AN AN A kaktused eaka Naa a 12 RECENVING TS 12 Listen in TWO way voice 12 Transmission to computer and printer in DECRYPTA Native mode 12 Transmission to computer and printer in ADEMCO 685 Surgard emulation mode 14 Messages from DECRYPTA to DECRYPTA printer POft ooooooooo oom 14 Warranty nn AAA BA AA nanang han naa ANN Laaa A Ra NN adi inai 14 begal compliance and Warning EE 14 United States Regulation FCC Warning nina nn aeaa A a il 14 EC Declaration of Conformity
12. Number Caller Id To Printer 0308 Heartbeat Caller ID ALL 02A8 Sescoa SS instead of 4x2 SUM Date Time 0298 3x2 Instead 4x1 Send Year 0288 Clear Zero ACK Delay 0268 Compress Extended SA TLR DECRYPTA 0258 Listen In Empty or 1 F SurGard Mode 0248 Printer Buzzer 0238 0228 Start handshake with 1400hz VFSK 0218 SIA CFSK DUAL 1400hz 2300hz 2300hz Stratel Telim Robofon lt CR gt Edit lt ESC gt Exit F1 Restore default lt F2 gt Read Config File Setup program display description and commands Address section Address part of display shows address fields for all DECRYPTA and TLR SA TLR receivers installed with PC Move cursor to desired DECRYPTA using UP DN arrows Press lt Enter gt to move to Parameter section on right part of display Parameters displayed on the right are actual operating parameters Press F1 to restore Factory defined parameters Press F2 to restore saved parameters Press lt ESC gt to Exit setup program INITPLUS Before accepting Exit command INITPLUS reguest authorization to save new parameters When exiting from INITPLUS time on ALL DECRYPTA TLR SA TLR will be reset to PC time MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 Page 5 Operating guide for Alarm Receiver DECRYPTA Parameter section to the right of Address section DECRYPTA address selected when entering this section is s
13. cess to any internal parts which may carry telecommunication network voltages Table Clearance mm Creepage mm Voltage Used or Generated by xX Y Host or Other Cards For a host or other expansion card fitted in the host using or generating voltages Above 300 Vrms or Vdc greater than 300V rms or dc advice from a competent telecommunication safety engineer must be obtained before installation or relevant equipment MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 Page 17 Operating guide for Alarm Receiver DECRYPTA Power Supply Unit or other source of excessive voltage MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 Page 18 Operating guide for Alarm Receiver DECRYPTA Technical data sheet for DECRYPTA Description DECRYPTA is the ideal receiver for mobile surveillance and field maintenance DECRYPTA has all features of TLR and SA TLR receivers and now an integrated display DECRYPTA is acompact high performance stand alone receiver you can bring in the field or use with all PCs and laptops DECRYPTA has two telephone line inputs Imposes no limit on number of accounts per line and provides a DB25 parallel printer port for direct printer output With rugged const
14. cknowledge to pannel 8 to select delay in seconds from 1 to 5 to choose and continue to next menu Check printer buzzer mode 8 to select from yes or no to choose and continue to next menu e utput in Sur Gard mode 8 to select from yes or no to choose and continue to next menu Setting Time hour 8 to select from 00 to 23 to choose and continue to next menu Setting Time minutes to select from 00 to 59 x to choose and continue to next menu MCDI Inc 86 Claude Champagne Avenue Montreal QC Canada H2V 2X1 Telephone 514 481 1067 Internet http www mcdi com Fax 514 481 1487 Page 11 Operatin uide for Alarm Receiver DECRYPTA Setting Date month to select from 01 to 12 to choose and continue to next menu Setting Date day to select from 01 to 31 to choose and continue to next menu Setting Date year to select from 00 to 99 to choose and return to begin of configuration mode Will save all configuration Message saving configuration will appear Gi press simultanously will reset DECRYPTA to factory default IDLE MODE When not in configuration nor receiving signals Decrypta displays date on first line and time on second line TYPICAL DISPLAYS INCOMING SIGNALS 4X2 CALLER ID NATIVE FORMAT LINE 1 TIME AND DATE LINE 2 RECEIVER AND LINE NUMBER SIGNAL FROM PANNEL LINE 3 CALLER ID INFORMATION CONTACT ID
15. closed by the Central station subject to operator action or receiver setup Listen in criteria Receiver DECRYPTA is triggered into Listen in mode for incoming events according to panel setup for specific formats SIA and Contact ID formats have specific codes for Listen in See Panel setup DTMF formats use the AEx signal where x can be 0 to F atthe Installer s choice 3x1 and 4x2 formats have no standard codes for Listen in DECRYPTA allows self selection of Listen in codes at Setup time Receiver action upon reception of Listen in trigger Upon reception of event in the Listen in category DECRYPTA receiver maintains the telephone line open for a period of up to 180 seconds or less then 180 seconds upon reception of any telephone tone from the keypad Operator control for Listen in Operator must be warned by Monitoring software of account listen in capability Operator has a maximum of 180 seconds from time of alarm reception to telephone pickup Failure to pickup telephone in this delays will cause line hang up by DECRYPTA receiver Once the line is seized by Central station local telephone the hang up action of DECRYPTA will have no effect To close communication with alarm signal site in the first 180 seconds when DECRYPTA is in action operator must press any key on the telephone keypad before hanging up The DECRYPTA will hang up telephone line before 180 seconds only upon reception of a tone from telephone keypad
16. dio or television farther away from each other or connect the computer with the device and the radio or television to outlets on separate circuits Consult the dealer or an experienced radio television technician for additional suggestions NOTE FCC registration does not constitute an expressed or implied guarantee of performance Right of the Telephone Company If this device causes harm to the telephone network the telephone company may stop your service temporarily or ask you to remove your equipment until the problem is resolved If possible they will notify you in advance If advance notice is not practical you will be notified as soon as possible and be given the opportunity to correct the situation You will also be informed of your right to file a complaint with the FCC Your telephone company may make changes in its facilities equipment operations or procedures that could affect the proper function of this device If they do you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service Federal communication commission FCC Notice FCC Registration Number This device complies with Part 68 Rules and Regulations of the FCC for direct connection to the Public Switched Telephone Network the FCC registration number and REN number appear on a sticker If requested this information must be provided to the telephone company Your connection to the telephone line must comply with these FCC rul
17. ercised when changing Handshake seguence Itis a well known fact that many dialers do not respond well to all startup seguences 1200 bps no parity 8 bits stop bit MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 Page 7 Operatin uide for Alarm Receiver DECRYPTA DESCRIPTION OF DECRYPTA DISPLAY DECRYPTA FRONT VIEW LCD DISPLAY CARRIAGE RETURN ESCAPE LINE 1 and LINE PRINTER LED OMPUTER LED Steady incoming signal POWER LED Blinks fast when Blinks slow no PC Blink slow no connexion Always on when printing Blinks Fast transmitting to PC Off OK unit is powered HERE EE DB9 FOR CHAINING OF DECRYPTAS USE MCDI DB25 NULL MODEM CABLES MRDC2 OR MRDC3 CABLE TO PC INCLUDED SERIAL ARD RESET 12V DC INPUT MOLEX BUTTON CABLE INCLUDED red is J l J MCDI INC PRINTER LINE1 LINE 2 Montreal Quebec MADE IN CANADA x positive black is negative DIRECT PRINTER OUTPUT DB25 USE SUPPLIED JUMPER INPUTS FOR PHONE LINE 1 AND WHEN NO PRINTER LINE 2 CONNECTED CARE OF LCD UNIT To clean always use a slightly damp cloth never use abrasives or solvants Avoid pressure and shock on LCD area damage may results CARE OF DECRYPTA UNIT To clean always use a slightly damp cloth never use abrasives or solvants Avoid pressure shock vibration moisture and excessive hum
18. es Use only an FCC standard RJ11W RJ14W or RJ11C RJ14C network interface jack and FCC compliant line cord and plug to connect to the telephone line To connect the device press the small plastic tab on the plug at the end of the telephone s line cord Insert into a jack until it clicks To disconnect press the tab and pull out If a network interface jack is not already installed in your location you can order one from your telephone company Order RJ11W RJ14W for wall mounted telephones or RJ11C RJ14C for desk table use In some states customers are permitted to install their own jacks This device may not be connected to a party line or coin telephone line Connection to Party Line Service is subject to state tariffs contact the state public utility commission public service commission or corporation commission for information Itis no longer necessary to notify the telephone company of your device s Registration and REN number however you must provide this information to the telephone company if they reguest it If trouble is experienced with this equipment for repair or warranty information please contact Local dealer or MCDI 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 If the equipment is causing harm to the telephone network the telephone company may request that you disconnect it until the problem is resolved This device does not have any serviceable parts Repair o
19. hown in heading above columns of parameters Move cursor to desired parameter using UP DN arrow Key in each new parameter After all changes have been entered press lt ESC gt to go back to Address Section ONLY in Address Section can changes be saved and sent to receiver Parameter definition Emulation mode easy setting information MCDI Mode Default setting Ademco 685 Mode Default setting Date Time NO Surgard Mode Surgard YES OPTIONS Address Memory address for DECRYPTA port as configured by connexion to com port IRA 3 4 5 default 9 10 11 12 15 DECRYPTA reguires no IRA setting Receiver Number sent to computer and printer 0 to F default 1 Line 1 Number sent to computer and printer Oto F default 1 Line 2 Number sent to computer and printer Oto F default 2 Heartbeat Yes enable No disable default DECRYPTA sends Heartbeat signals to computer every 30 seconds only in Native mode and Surgard mode Sescoa SS Yes enable No disable default Conflict with Pulse 4X2 Checksum format 3x2 Instead 4x1 Yes enable No disable default Conflict with 4X1 in Compressed Expanded DO NOT select with Compressed Expanded YES Clear Zero Yes Zero removed in 3x1 and 4x1 No zero present default Tells DECRYPTA receiver not to insert a zero in front of the account number and in front of the alarm code for incoming 3 x 1 and 4x 1 Example 3x1 Extended compressed in 3 x 2 standard 1234 4445 After compression 123
20. idity damage may results Do not expose to direct sunlight Operating condition 4 C to 40 C Storage condition 15 c to 65 C Always use a 12V DC power supply 6W with supplied cable MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal QC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 Page 8 Operating guide for Alarm Receiver DECRYPTA DESCRIPTIONS OF INTERNAL MENUS Start up menu On power up Configuration menu To enter configuration press AN ea At any point during configuration Pressing E will save configuration Choice of language french fran ais portuguese portugu s or german deutsch to choose language and continue to next menu in selected language O a receiver number to select from 1 to 9 to choose and continue to next menu Assigning a number to line 1 to select from 1 to 9 to choose and continue to next menu Assigning a number to line 2 CC to select from 1 to 9 to choose and continue to next menu Enabling heartbeat Gei to select from yes or no to choose and continue to next menu MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 Page 9 Operatin uide for Alarm Receiver DECRYPTA Enabling Sescoa SS format to select from yes orno to choose and continue to next menu Enabling 3x2 instead of 4x1 S to select from yes or no
21. ing twice the ON LINE printer key Buzzing resumes if printer is left Off line Do not set the Yes parameter if no printer is installed Multiple error messages could be generated by taking this action Wait after O H Delay to start Handshake after Off Hook No normal Yes 5 seconds 2 Rings Setting not in use DECRYPTA set to 1 ring Setting not Caller ID dependent Caller ID PC No Do not send telephone ID data to PC Yes Send telephone ID data to PC Caller ID PRN No Do not send telephone ID data to DECRYPTA printer Yes Send telephone ID data to DECRYPTA printer Caller ID ALL No Do not send telephone ID data except when bad transmission occurs Yes Send telephone ID data to PC and DECRYPTA printer unless PRN and PC select otherwise Date Time Yes enable Default No disable Send year Yes Date including the year No Date with no year default Yes tells DECRYPTA to add the Year in date format HH mm MWDD YY No by default tells DECRYPTA to use date and time format MM DD SA TLR Yes enable SA TLR DECRYPTA No disable Default DECRYPTA Surgard Mode Yes enable No disable Default ACK delay Wait time in seconds for ACK reception before resend Surgard Native mode only Start handshake with 1 1400hz VFSK 2 SIA CFSK 3 DUAL 1400hz 2300hz 4 2300hz 5 STRATEL 6 TELIM 7 ROBOFON Transmission rate Default seguence is as above Option is to change first element with the one selected Extreme care must be ex
22. layed only if COM and IRQ are free If no signal is displayed change IRQ in COMIRQ and in DECRYPTA setup Try again until signal is displayed indicating a free IRQ Press Space bar to display one signal at atime Press A to empty receiver buffer and enable ACK MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 Page 3 Operating guide for Alarm Receiver DECRYPTA Installing DECRYPTA receiver Power the DECRYPTA from any 12 volt source Connect DECRYPTA to a computer serial port using the supplied null modem cable Itis recommended to connect a printer to the DECRYPTA parallel port This printer insures a full hard copy backup of all signals received by DECRYPTA If a printer is not connected make sure supplied jumper is connected to printer port Configuring DECRYPTA receiver DECRYPTA is configured using Setup software INITPLUS or internal configuration menus Configuration in French German Spanish and Portuguese is handled only by internal configuration menus DECRYPTA can be configured two ways 1 Using DECRYPTA display and Menus See P 8 to 11 of this document 2 Using INTIPLUS setup program Connect DECRYPTA to PC See Section above on How to install DECRYTYPA Physical characteristics of DECRYPTA FRONT PANEL DESCRIPTION POWER Green LED Lights when DECRYPTA is on LINE 1 2 Red LED Lights when a transmission occurs Blinks whe
23. n signal is absent COMPUTER Yellow LED Lights when a transmission occurs Blinks when computer is absent PRINTER Yellow LED Lights when printing occurs MCDI Inc 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 REAR PANEL DESCRIPTION 12V Power input 12 V DC 6W SERIAL DB25 male connector Data transfer to computer in Surgard emulation Serial port 1200 Baud 8 bit 1 stop bit Pin 2 transmit Pin 3 receive Pin 7 ground Cable type null modem PRINTER DB25 female connector Printer parallel port REMOTE For optional chaining of DECRYPTA units Displays incoming signals on last DECRYPTA in row LINE 1 LINE 2 Incoming phone lines Internet http www mcdi com Telephone 514 481 1067 Fax 514 481 1487 Page 4 Operating guide for Alarm Receiver DECRYPTA Setting up DECRYPTA Firmware Version 5 1 5 Firmware version 5 1 5 and setup program INITPLUS added features New setup display allows easier selection of software interface emulation formats Ademco 685 mode Surgard mode Native mode Receiver handshake heading pattern is now selectable Setup program INITPLUS v1 9 displays selection pattern seen below Addresses DECRYPTA PARAMETERS MCDI INC 514 481 1067 Cold Reset Ctl R 03F8 Address 03F8 02F8 03E8 IRQ Not applicable ot DECRYPTA Wait After Off Hook 02E8 Receiver number 2 Rings Not in use set to 1 ring 0338 Line 1 Number Caller ID To PC 0318 Line 2
24. r exchange must be made by the manufacturer or its representatives Signaling method This device does not dial out Ringer Eguivalence Number The FCC Registration label on the device includes a Ringer Eguivalence Number REN which is used to determine the number of devices you may connect to your telephone line A high total REN may prevent telephones from ringing in response to an incoming call and may make placing calls difficult In most areas a total REN of 5 should permit normal telephone operation To determine the total REN allowed on your telephone line consult your local telephone company Hearing aids This device does not convert the signal for human hearing Programming Emergency numbers This device does not dial out Important safety instructions When using the device basic safety precautions should always be followed to reduce risk of fire electrical shock and injury to persons including the following 1 Read and understand all instructions 2 Follow the warnings and instructions marked on the product 3 This device is installed in a computer This work should be done by a qualified computer technician 4 Avoid using during electrical storm There may be a remote risk of electrical shock from lightning MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 Page 16 Operating guide for Alarm Receiver DECRYPTA 5 CAUTION Do no use
25. rs Displays last 800 events Configuration and operation on front panel Alarm acknowledge key for easy operation Configuration menus in English French German Spanish or Portuguese Internet http www mcdi com Telephone 514 481 1067 Fax 514 481 1487
26. ruction ease of operation and mobility DECRYPTA adds many new and attractive features to the basic Monitoring Station Line circuitry FCC USA IC Canada CE Security Europe CE Telecom Europe ICT D800 428K Germany IBPT TC970587 Belgium certified Specifications Communications DECRYPTA provides an 2 RJ11 type phone jacks for connection to one or two telephone lines Type Pulse DTMF FSK Reception Speed 10 20 40 pps DR CS Handshake and Kissoff 1400Hz 2300Hz 2225Hz Pulse Frequency Telim 1800Hz 1900H 1100Hz Reception Formats supported Acron Radionics 6500 Ademco Radionics extended Slow Fast Sescoa Slow Super Fast Contact ID Sescoa Standard Extended SIA Express Contact ID High Speed compressed amp converted CFSK BFSK VFSK Silent Knight Slow MCDI Take a look SurGard FBI Super Fast Napco Point ID 3x1 3x1 extended 4x1 3x1 extended compressed 4x2 4x1 extended 4x1 extended compressed 4x2 4x2 Zero removed 3x1 4x1 extended Optex s Varitech C amp K Bell 103A2 or CCIT on option For Germany and Scandinavia as Pulse replacement Telim Robofon Printer Output 2 Standard DB25 connector for Centronics Parallel Interface 2 Cables MRDC2 AND MRDC3 option allow one printer to serve all DECRYPTA receivers chained Event logging when PC is absent DECRYPTA stores up to 800 events Native mode or 1000 events Ademco 685 mode SurGard mode Events are stored as
27. s sent to DECRYPTA parallel port Warranty The Electronic products of MCDI Inc are under a five year limited warranty Material is repaired or exchanged free of charge when returned to MCDI service points post paid Abused or misused equipment is not covered by this warranty Power surge damages are not covered by warranty Legal compliance and Warning United States Regulation FCC Warning Radio TV interference This device is not eguipped with dialing eguipment Telephones eguipped with electronic dialing keys generate and use radio freguency energy and if not installed and used properly and in strict accordance with the manufacturer s instructions may cause interference to radio and television reception NOTE This device has been tested and found to comply with Part 15 if the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and MCDI Inc Internet http www mcdi com 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Telephone 514 481 1067 Fax 514 481 1487 Page 15 Operating guide for Alarm Receiver DECRYPTA 2 This device must accept any interference received including interference that may cause undesirable operation If your device causes interference one of the following measure may correct the problem Reorient or relocate the receiving TV or radio antenna when this may be done safely To the extent possible move the device and the ra
28. sharp instruments during installation procedure to eliminate the possibility of accidental damage to the device the computer or the cord 6 Save these instructions Europe EC Declaration of ConformityEC Declaration of ConformityEC Declaration of Conformity We MCDI Inc 86 Claude Champagne Avenue Montreal AC Canada H2V 2X1 Declare under our sole legal responsibility that the following products conform to the protection reguirements of council directive 89 336 EEC on the approximation of the laws of member states relating to electromagnetic compatibility as amended by directive 93 68 EEC MCDI DECRYPTA alarm receiver The products to which this declaration relates are in conformity with the following relevant harmonised standards the reference numbers of which have been published in the Official Journal of the European Communities EN50082 1 1992 EN55022 CLASS A EN 60555 PARTS 2 amp 3 EN41003 1993 BAPT Note 48 revision 5 EN60950 IEC Ed 2 Amendment No1 1992 Amendment No2 1993 Amendment No3 1996 Signed this 7th day of January 1997 MCDI Inc Europe EN41003 Warning Application Note 48 Issue SEN41003 Warning Application Note 48 Issue SEN41003 Warning Application Note 48 Issue 5 1 The power reguired by the host and the total of all adapter cards installed within the host environment together with any auxiliary apparatus shall not exceed the power specification of the host apparatus The power reguirements
Download Pdf Manuals
Related Search