Home

Juno T41 - User Manual

1. 1 2 4 In the Launcher tap Settings Wireless amp networks VPN settings The VPNs configured in the handheld are listed on the VPN settings screen Tap the VPN that you want to edit Tap Edit network then make the required changes Tap the Menu button then tap Save To delete a VPN 1 2 In the Launcher tap Settings Wireless amp networks VPN settings The VPNs configured in the handheld are listed on the VPN settings screen Tap the VPN that you want to delete Tap Delete network then tap OK Trimble Juno T41 User Guide 34 Using the GNSS receiver The Juno T41 handheld includes an integrated GNSS receiver that enables you to use GPS satellites GPS Global Positioning System is a Global Navigation Satellite System GNSS consisting of a constellation of satellites that orbit the earth GNSS provides worldwide all weather 24 hour time and position information To receive signals from GPS satellites the handheld must have a clear view of the sky GPS positions may not always be available particularly in or near buildings in vehicles or under tree canopy To use GPS satellites 1 Inthe Launcher tap Settings Locations amp security 2 Tap Use GPS satellites to select it Using GPS enables the handheld to determine your location within 2 to 4 meter accuracy and geo tagging of photos you take using the handheld s integrated camera Using an external GNSS antenna The Juno T41 hand
2. The Status bar appears at the top of the screen On the left it displays icons indicating that you ve received notifications and on the right it displays icons indicating the handheld s status along with the current time If there are more notifications than can fit in the status bar the icon CF appears Click the icon to view all notifications See Managing notifications page 23 Status indicators that appear in the Status bar are as follows Trimble Juno T41 User Guide 17 Icon mg mg mg Ne K E SE ma T iung Description Connected to GPRS mobile network GPRS in use Connected to EDGE mobile network EDGE in use Connected to 3G mobile network 3G in use Mobile network signal strength Connected to a Wi Fi network Roaming No signal Airplane mode GPS is on Receiving location data from GPS Icon a a Description Bluetooth is on Connected to a Bluetooth device Alarm is set Speakerphone is on Vibrate mode Ringer is silenced Phone microphone is mute No SIM card installed Battery is very low Battery is low Battery is partially charged Battery is full Battery is charging The following icons indicate that you ve received a notification See Managing notifications page 23 for information about responding to these notifications In addition to these icons applications you install on the handheld may use their own notification icons Icon Icon Description EE
3. the menus that appear e To open the Launcher and view all your applications tap the Launcher icon You can customize the application icons widgets shortcuts and other features that appear on the Home screen See Personalizing the Home screen page 23 You can set the screen timeout so that if you don t use the handheld for a while the screen automatically turns off to conserve battery power In the Launcher tap Settings then tap Display Screen timeout then select the required timeout To wake up the handheld when the screen has turned off press the Power button If you have set security on the handheld you will need to unlock it see Locking the screen page 26 then drag the lock icon to the right Viewing other parts of the Home screen Extensions to the Home screen provide more space for widgets shortcuts and other items Slide your finger left or right across the Home screen Small dots at the lower left and right indicate which screen you re viewing Trimble Juno T41 User Guide 16 Sieehead starting a Michon rivers See all your apps Touch the Launcher mon Tap and hold the small dots on the lower left or right of the screen to view thumbnails of the Home screen and its extensions which you can tap to open To return to the Home screen at at any time in any application press See all your apps QC Touch the Launcher Kon the Home button gt Touch the Launcher k Status indicators
4. To access the camera setting options start the camera application The camera setting options are displayed on the screen and indicate the current settings To edit the settings tap the required option In Still mode the settings are Trimble Juno T41 User Guide 36 Control B Settings Store location White balance Flash mode Zoom Available settings Use to set Focus mode Autofocus Auto to more quickly take pictures focused at infinity Infinity or close ups Macro Exposure 2 to 2 Picture size Picture quality Color effect Restore to defaults GPS location stored with photo E GPS Location not stored with photo Set the camera to adjust the white balance automatically or specify how the camera adjusts colors in different kinds of light Automatic Incandescent Ed Daylight TE Fluorescent O Cloudy kad Automatic On E oft x1 to x4 In Video mode the settings are Control B Settings White balance Description Use to set Color effect Restore to defaults Set the camera to adjust the white balance automatically or specify how the camera adjusts colors in different kinds of light Automatic Bad Incandescent Ed Daylight a Fluorescent Trimble Juno T41 User Guide 37 Control Description ji Cloudy Flash mode On Off Video quality Set the appropriate video quality and maximum length combination High 30m Low 30m Trimble Juno T4
5. To check the memory capacity on the handheld in the Launcher tap Settings Storage Trimble recommends that you regularly copy important data to an office computer For more information see Connecting to an office computer page 29 Deleting data To quickly delete all data on the SD card in the Launcher tap Settings and then tap Storage Erase internal SD card To quickly delete all the data on the handheld 1 In the Launcher tap Settings and then tap Privacy Factory data reset 2 If you want to delete all the data on the SD card select the Erase internal SD card option Otherwise leave this option unselected 3 Tap Reset phone Memory cards As an alternative to storage memory you can save data to a memory card Use a MicroSD memory card to securely transfer data to and from another device that supports MicroSD memory cards WARNING The presence of any dust or moisture in the memory card slot may adversely affect the device and void your Trimble warranty To prevent dust or moisture entering the memory card slot Make certain that the storage card slot door is attached correctly when you are using the handheld outdoors When inserting or removing a memory card place the handheld on a dust free indoor surface N WARNING Static electricity can harm electronic components inside the handheld To prevent static damage discharge static electricity from your body before you touch any of the electronic components in
6. a kaa Cp ah New text or multimedia message Problem with text or multimedia message delivery New voicemail Upcoming event Data is syncing Problem with sign in or sync SD card or USB storage is full An open Wi Fi network is available Handheld is connected via USB cable co Description Call in progress Call in progress using a Bluetooth headset Missed call Call on hold Call forwarding is on Song is playing Uploading data Downloading data Connected to or disconnected from Trimble Juno T41 User Guide 18 Icon Description Icon Description virtual private network VPN 3 More notifications HE Application update available A Carrier data use threshold approaching or exceeded Interacting with the handheld To interact with the handheld using the touchscreen use a capacitive stylus or your finger to tap items on the touch screen to scroll up or down and to enter information Action Tap Tap and hold Drag Swipe or slide Double tap Pinch Rotate the screen Definition Touch the screen once to open items and select options Use the keyboard input panel to enter typed text by tapping keys on the on screen keyboard Tap and hold the stylus or your finger on an item to see a list of actions available for that item On the pop up menu that appears tap the action you want to perform Hold the stylus or your finger on an item for amoment and then witho
7. AC adaptors safely Use only the AC adaptor intended for the handheld Using any other AC adaptor can damage the handheld and may void your warranty Do not use the AC adaptor with any other product Make certain that the input voltage on the adaptor matches the voltage and frequency in your location Make certain that the adaptor has prongs compatible with your outlets Do not use the AC adaptor in wet outdoor areas it is designed for indoor use only Unplug the AC adaptor from power when not in use Trimble Juno T41 User Guide 6 Electrostatic discharge WARNING Static electricity can harm electronic components inside your handheld To prevent static damage Discharge static electricity from your body before you touch any of the electronic components inside your device such as a memory module You can do so by touching an unpainted metal surface The handheld is designed for outdoor conditions however under conditions of low humidity extremely high voltage discharge events are possible Users are advised that the risk of causing discharge to sensitive electronics can be minimized by avoiding finger contact to the recessed connectors on the unit Battery safety The rechargeable Lithium ion polymer battery is supplied partially charged Charge the battery completely before using it for the first time see Powering the handheld page 12 If the battery has been stored for longer than six months charge it before use
8. ENTIRE LIABILITY UNDER ANY PROVISION HEREIN SHALL BE LIMITED TO THE AMOUNT PAID BY YOU FORTHE PRODUCT TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IN NO EVENT SHALL TRIMBLE OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGE WHATSOEVER UNDER ANY CIRCUMSTANCE OR LEGAL THEORY RELATING INANYWAY TO THE PRODUCTS SOFTWARE AND ACCOMPANYING DOCUMENTATION AND MATERIALS INCLUDING WITHOUT LIMITATION DAMAGES FORLOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OF DATA ORANY OTHER PECUNIARY LOSS REGARDLESS OF WHETHER TRIMBLE HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH LOSS AND REGARDLESS OF THE COURSE OF DEALING WHICH DEVELOPS OR HAS DEVELOPED BETWEEN YOU AND TRIMBLE BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES THE ABOVE LIMITATION MAY NOT APPLY TO YOU PLEASE NOTE THE ABOVE TRIMBLE LIMITED WARRANTY PROVISIONS WILL NOT APPLY TO PRODUCTS PURCHASED IN THOSE JURISDICTIONS E G MEMBER STATES OF THE EUROPEAN ECONOMIC AREA IN WHICH PRODUCT WARRANTIES ARE THE RESPONSIBILITY OF THE LOCAL DEALER FROM WHOM THE PRODUCTS ARE ACQUIRED IN SUCH A CASE PLEASE CONTACT YOUR TRIMBLE DEALER FOR APPLICABLE WARRANTY INFORMATION Notice to Australian Purchasers The Australian Consumer Law Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund
9. N WARNING Use only the battery intended for the product Using any other battery can damage the handheld and may void your warranty If the battery becomes damaged or stops charging fully replace it with a new battery WARNING Do not damage the rechargeable Lithium ion polymer battery A damaged battery can cause an explosion or fire and can result in personal injury and or property damage To prevent injury or damage Do not use or charge the battery if it appears to be damaged Signs of damage include but are not limited to discoloration warping and leaking battery fluid Do not store or leave your device near a heat source such as near a fireplace or other heat generating appliance or otherwise expose it to temperatures in excess of 70 C 158 F such as on a vehicle dashboard When heated to excessive temperatures battery cells could explode or vent posing a risk of fire Do not immerse the battery in water Do not use or store the battery inside a vehicle during hot weather Do not drop or puncture the battery Do not open the battery or short circuit its contacts WARNING Avoid contact with the rechargeable Lithium ion polymer battery if it appears to be leaking Battery fluid is corrosive and contact with it can result in personal injury and or property damage To prevent injury or damage If the battery leaks avoid contact with the battery fluid If battery fluid gets into your eyes immediately rinse your
10. Wireless amp networks 2 Make sure Wi Fi is turned on If it is not tap Wi Fi to turn it on Trimble Juno T41 User Guide 30 3 Tap Wi Fi Settings The handheld lists the Wi Fi networks available Secured networks are indicated with a Lock icon 4 Ifthe handheld finds a network that you connected to previously it connects to it Otherwise tap the network that you want to connect to e Ifthe network is open you are prompted to confirm that you want to connect to the network Tap Connect e Ifthe network is secured you re prompted to enter a password or other details To view details about the speed security address and related settings of the network you are connected to in the Wi Fi settings screen tap the network name By default when the Wi Fi radio is on notifications appear in the Status bar when the handheld detects an open Wi Fi network To receive notifications when open networks are in range in the Wi Fi settings screen select Network notification Adding a Wi Fi network You can add a Wi Fi network so the handheld remembers it along with any security details You can then connect to it automatically when it is in range You must also add a Wi Fi network to connect to it if the network does not broadcast its name SSID or to add a Wi Fi network when you are out of its range To join a secured network you must obtain the security details from the network s administrator In the Launcher tap Settings W
11. any additional information about the caller if they are saved in Contacts All incoming calls are recorded in the Call log To answer a call drag the green phone icon to the right If you were already on a call the first call is placed on hold while you answer the new call To silence the ringer before answering the call press the Volume Down button To decline a call drag the red phone button to the left Using the Call log The Call log contains all the calls you have made received or missed You can use it to redial a number or return a call 1 Inthe Phone application or Contacts tap the Call log tab 2 To dial a number listed in the Call log tap next to the required number You can also add an entry s number to your Contacts 1 Tap and hold the entry 2 Tap Add to contacts 3 Tap Create new contact or scroll to an existing contact to add the number to Trimble Juno T41 User Guide 26 To clear the Call log press Menu and then tap Clear call log Dialing a number from the Contacts list To make a phone call using the Contacts list 1 Inthe Launcher tap Contacts or tap the Phone icon on the Home screen and then tap the Contacts tab 2 Tap the required contact to call Messaging Use Messaging to send and receive text messages SMS and multimedia message MMS Sending a text or a multimedia message 1 Make sure that a SIM card is installed See Inserting and removing the SIM card pag
12. brouillage est susceptible d en compromettre le fonctionnement information is applicable to this device C 4 0 700 that carry the following CE mark i This product has been tested and found to comply with all requirements for CE Marking and sale within the European Economic Area EEA The Trimble Juno T41 has Bluetooth wireless technology approval in most EU countries and satisfies the requirements for Radio and Telecommunication Terminal Equipment specified by European Council Directive 1999 5 EC These requirements provide reasonable protection against harmful interference when the equipment is operated appropriately in a residential or commercial environment Juno T41 handhelds equipped with wireless cellular modem radios are intended for connection to European Networks operating with GSM 900 or GSM 1800 A copy of the CE Declaration of Conformity for the Juno T41 handheld can be accessed from http www trimble com support shtml Europe EU Conformance The following CE compliance Australia and New Zealand This product conforms with the regulatory requirements of the Australian Communications Authority ACA EMC and Radiocommunications framework thus satisfying the requirements for C Tick Marking and sale within Australia and New Zealand Additionally Juno T41 3 5G products that incorporate a n modem also comply with the requirements for A Tick Marking and sale in Australia Trimble Juno T41 User Guide 3 Taiwan Battery R
13. device is designed and manufactured not to exceed the emission limits for exposure to radio frequency RF energy set by the Federal Communications Commission of the U S Government The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate or SAR The SAR limit set by the FCC is 1 6W kg Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands Although the SAR is determined at the highest certified power level the actual SAR level of the device while operating can be well below the maximum value This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network In general the closer you are to a wireless base station antenna the lower the power output The highest SAR value for the device as reported to the FCC when worn on the body as described in the user guide is no more than 0 39 W kg for GSM850 1 23 W kg for PCS1900 Body worn measurements differ among device models depending upon available accessories and FCC requirements While there may be differences between the SAR levels of various devices and at various positions they all meet the government requirement The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposu
14. emitted is hundreds of times lower than the electromagnetic energy emitted by wireless devices such as mobile phones However the use of wireless radios may be restricted in some situations or environments such as on aircraft If you are unsure of restrictions you are encouraged to ask for authorization before turning on the wireless radios Exposure to radio frequency radiation from cellular wireless transmitters Juno T41 handhelds equipped with wireless cellular modem radios have been designed and manufactured to meet safety requirements for limiting exposure to radio waves When used in accordance with the instructions set forth in this manual the equipment has been independently verified to not exceed the emission limits for safe exposure to radio frequency RF energy as specified by the Federal Communications Commission of the U S Government in 47 CFR 2 1093 These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies The standards include a substantial safety margin designed to assure the safety of all persons regardless of age and health AC Adaptor safety To charge the handheld s battery use the USB power cable and adaptor kit provided with the handheld see Powering the handheld page 12 WARNING To use
15. hold the folder window s title bar Enter a new name in the dialog that appears Tap OK n BY B Set the time and date 1 Inthe Launcher tap Settings Date amp time 2 Do one ofthe following e Tap Automatic to use network time and date settings e Manually set the time and date Make sure Automatic is not selected then tap the other options on the screen to set the date time zone time time format and date format 3 Tap the Back A button to exit the screen Trimble Juno T41 User Guide 23 Using the clock In addition to displaying the date and time the Clock application can be used as an alarm clock To open the Clock application in the Launcher tap Clock The clock opens with the date and time displayed on the Home screen With the Clock application running you can e Tap the Dimmer icon ba to dim the screen brighteness Tap the Dimmer icon again to restore normal brightness ak e Set alarms Tap the Alarm icon O to open the Alarms screen Setting alarms On the Alarms screen PA e Tap the Alarm icon O next to an alarm to turn it on or off Alarms that are set are underlined in green e Tap an existing alarm to change its time and other attributes e Tap Add alarm to add a new alarm You can also add a new alarm on the main Clock screen press the Menu button and then tap Add alarm Display settings The backlight makes the screen easier to read in low light but uses extra power Use the Brigh
16. new APN a Tap Access Point Names b Tap an existing APN to edit it or press Menu New APN to create a new APN Enter the APN settings that you obtained from your wireless service provider c Press Menu Save d To use the new or edited APN select it in the APN screen 5 To enable data transfer over the cellular network select Data enabled 6 To enable data transfer when roaming select Data roaming 7 To limit limiting data connections to 2G networks GPRS or EDGE select Only use 2G networks This will extend the battery charge When connected to a 2G network Trimble recommends that you do not transmit a lot of data such as sending uploading or downloading pictures or video until you are connected to a faster mobile or other wireless network Connecting to a Wi Fi access point To use Wi Fi on the Juno T41 handheld you must access a wireless access point or hotspot Some hotspots are open and you can easily connect to them Others are hidden or implement other security features so you must configure the handheld so it can connect to them The Status bar displays icons that indicate Wi Fi status When you connect to a Wi Fi network the handheld obtains a network address and other information it needs from the network If required you can configure the handheld with advanced settings see Advanced Wi Fi settings below To turn on the Wi Fi radio and connect to a Wi Fi network 1 Inthe Launcher tap Settings
17. provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on The user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission rules The radios in this device have been designed and manufactured to not exceed stipulated emission limits for exposure to radio frequency RF energy as required by the Federal Communications Commission of the U S Government 47 C F R 2 1091 and 2 1093 The external antenna connector provided in this device is for GNSS antennas only IC Operation is subject
18. spend some time reading this guide to learn about the special features of the product Use and care of the handheld When using the handheld e Protect the touch screen by using your finger or the capacitive stylus and avoid using excessive pressure and sharp or abrasive objects To protect the touch screen from pressure and abrasive objects Trimble recommends that you apply a screen protector e Keep the outer surface free of dirt and dust e Ensure that the protective covers are appropriately fitted to the external antenna port and SIM memory card slot so that they are kept free from dirt dust fluid ingress and electrostatic discharge e Protect the handheld from extreme temperatures For example do not leave the handheld on the dashboard of a vehicle e Depending on the model the handheld is rated IP65 or IP68 but is not waterproof Do not immerse the handheld in water and be careful not to drop the handheld or subject it to any strong impact To clean the handheld wipe it with a clean dry cloth Trimble Juno T41 User Guide 9 Technical assistance Go to the Juno T41 handheld webpage on the Trimble website www trimble com Outdoor Rugged Computers junot41 aspx for the latest support information including e support notes detailing support issues e documentation e the latest files available for download Additional help If you still cannot find the information that you need contact your Trimble reseller P
19. 02 2 elec eee eee ee eee aaa 11 Powering the handheld 0 0 eco cece eee cece cece cece cece cece cece eeeceseeseeseees 12 Resetting the handheld to factory defaults 2 22 elie cece eee eee eee eee eeeeee 14 Storing data aoaaa aoaaa eee eee ee eee eee eee LLDD DDALL ee eee eeeeeeeeeeeeeseeseees 14 Deleting data KA 15 Inserting and removing the SIM card 2 2 2 22 aa 16 Using the Android operating system o eee eee cece eee eee e aa LLa aLaaa aana aaan 17 Using the Home screen _ 12 22 2222 aoaaa aoaaa ahaaa aLaaa LLALL DAAL eee eeceeeeeseeceseeeeeeeeees 17 Viewing other parts of the Home screen 2 cece eee eee eee eee e eee ec ceeseeeseeeeee 17 Status indicators l elec eee cece cece eee e cece eee e cece eee c cece LLa ooann annn 18 Interacting with the handheld 2722 0 a 20 Entering information 202 cece aooaa cece ccc ee ccc ccc ee cece cece cece ceeseeeeeeeteeeeeeseeees 21 Personalizing the Home screen aa 23 Set the time and date a 24 SINING CIO CI mada HA AG a eee Stee aa E LS ood eden ee SA amAAUL eee 25 Setting alarms o cece cece eee cee eee eee LLLA LLLA LLLA LLLA LLLA Loan LLa aaau 25 Display Settings ee cess tee ec een an GG a a Ba 25 SOUNGS oop ceecendde doce ceee dee dehcea caddie cocdupecuced cctbecdecusiviesseedecesdaabaececeseaseneevaneces 26 OCS THES COCR oo as cee acdsee dee
20. 1 User Guide 38
21. A damaged battery can cause an explosion or fire and can result in personal injury and or property damage To prevent injury or damage Do not use or charge the battery if it appears to be damaged Signs of damage include but are not limited to discoloration warping and leaking battery fluid Do not store or leave your device near a heat source such as near a fireplace or other heat generating appliance or otherwise expose it to temperatures in excess of 70 C 158 F such as on a vehicle dashboard When heated to excessive temperatures battery cells could explode or vent posing a risk of fire Do not immerse the battery in water Do not use or store the battery inside a vehicle during hot weather Do not drop or puncture the battery Do not open the battery or short circuit its contacts WARNING Avoid contact with the rechargeable Lithium ion polymer battery if it appears to be leaking Battery fluid is corrosive and contact with it can result in personal injury and or property damage To prevent injury or damage If the battery leaks avoid contact with the battery fluid If battery fluid gets into your eyes immediately rinse your eyes with clean water and seek medical attention Do not rub your eyes If battery fluid gets onto your skin or clothing immediately use clean water to wash off the battery fluid WARNING Charge and use the rechargeable Lithium ion polymer battery only in strict ac
22. USER GUIDE Trimble Juno T41 handheld Version 1 00 Revision A ST on bl December 2012 ae rim e Corporate Office 10355 Westmoor Drive Suite 100 Westminster CO 80021 USA www trimble com Legal Notices 2012 Trimble Navigation Limited All rights reserved Trimble the Globe amp Triangle logo are trademarks of Trimble Navigation Limited registered in the United States and in other countries Juno is a trademark of Trimble Navigation Limited The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Trimble Navigation Limited is under license Android is a trademark of Google Inc Microsoft Vista Windows and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries All other trademarks are the property of their respective owners Release Notice This is the January 2013 release Revision A of the Trimble Juno T41 handheld documentation Limited Warranty Terms and Conditions Product Limited Warranty Subject to the terms and conditions set forth herein Trimble Navigation Limited Trimble warrants that for a period of 1 year from date of purchase this Trimble product the Product will substantially conform to Trimble s publicly available specifications for the Product and that the hardware and any storage media components of the Product will be substantially free from defects in mater
23. any of the electronic components inside your device such as a memory module You can do so by touching an unpainted metal surface To insert or remove a SIM card 1 Turn off the handheld see Turning on and turning off the handheld page 13 2 Ina dust free indoor environment remove the two small screws to remove the SIM card slot cover on the left side of the handheld 3 Insert or remove the SIM card with the gold contacts face down 4 Replace the SIM card slot cover tightening the two small screws Trimble Juno T41 User Guide 15 Using the Android operating system The Juno T41 handheld is powered by the Android operating system When you start the handheld the Home screen appears From here you can access all the features on the handheld Using the Home screen The Home screen has the following elements EJ ua MT 4 00 ou e TheStatus bar at the top of the screen showss the time signal strength battery status and other information It also displays notification icons See Managing notifications page 23 e Widgets for example the Google search field are applications that you can use directly on the Home screen Rearrange your Home screen Touch amp hoti an item and when it wbrabes drag A where you want e To open any item anywhere on the Home screen tap it To add a i shortcut to an application or a widget tap and hold an empty space on the Home screen then select the required item from
24. arts of the Juno T41 handheld This section describes the main features of the Juno T41 handheld and provides the information you need to get up and running with the handheld eS oo a Power button Charge Notification LED Headset connector Microphone Volume Action buttons Camera and flash MicroSD and SIM card slot Speaker Touch screen I O Power connector GNSS antenna port Buttons Home Menu Back Search O G BO 8 SOO QO Trimble Juno T41 User Guide 10 Powering the handheld The Juno T41 handheld contains a rechargeable Lithium ion polymer battery Note Charge the battery completely before using the handheld for the first time If the battery has been stored for longer than six months charge it before use Trimble recommends charging the battery for four hours to recharge it fully Note Cold temperatures or using Bluetooth wireless technology Wi Fi or the cellular modem consume additional battery power and so shortens battery life between charges Battery safety A WARNING Use only the battery intended for the product Using any other battery can damage the handheld and may void your warranty If the battery becomes damaged or stops charging fully replace it with a new battery WARNING Do not damage the rechargeable Lithium ion polymer battery
25. cordance with the instructions Charging or using the battery in unauthorized equipment can cause an explosion or fire and can result in personal injury and or equipment damage To prevent injury or damage Do not charge or use the battery if it appears to be damaged or leaking Charge the Lithium ion polymer battery only in a Trimble product that is specified to charge it Be sure to follow all instructions that are provided with the battery charger Discontinue charging a battery that gives off extreme heat or a burning odor Use the battery only in Trimble equipment that is specified to use it Use the battery only for its intended use and according to the instructions in the product documentation Trimble Juno T41 User Guide 11 Charging the battery 1 Connect the AC power adaptor to the Power socket on the handheld and then connect the adaptor to main power An international adaptor kit is provided with the handheld 2 Check that the Charge Notification LED on the handheld is solid orange indicating that the handheld is properly connected to the power source and the battery is charging Fully charging the battery from empty takes approximately four hours The Charge Notification LED on the handheld indicates the battery power or charging status and operating system notifications as shown below LED State Handheld battery state Solid orange Battery is charging Flashing orange Battery is charging operating
26. do one of the following e drag the Status bar down from the top of the screen e inthe Launcher or on the Home screen press the Menu button and then tap Notifications Tap a notification to open it in its application To clear all notifications open the Notifications panel and then tap Clear at the top right of the panel All event based notifications are cleared ongoing notifications remain in the list To close the Notifications panel drag the tab at the bottom of the Notifications panel to the top of the screen or press the Back button The panel also closes when you touch a notification to respond to it Personalizing the Home screen You can add application icons shortcuts widgets and other items to any part of any Home screen where there is free space You can also change the wallpaper To add an item to the Home screen 1 On the Home screen press the Menu 7 button and tap Add or tap and hold an empty location on the Home screen If there is no space on the Home screen Add is disabled you must delete or move an item before you can add another item or switch to another Home screen pane 2 Onthemenu that opens tap the type of item you want to add You can add the following types of items to the Home screen e Shortcuts Add shortcuts to applications for example a bookmarked webpage ora favorite contact The shortcuts available depend on the applications you have installed e Widgets Add any ofa variet
27. e 16 2 Make sure that the phone is turned on See Turning on and turning off the integrated radios page 30 3 Tap the Messaging icon pa in the Launcher The Messaging window opens where you can create a new message or open an ongoing message thread 4 Tap New message to start a new text or multimedia message or tap an existing message thread to open it 5 Fora new message do one of the following e enter a phone number in the To field As you enter the number matching contacts appear You can tap a contact to select it or continue to enter the number e start to type the name of a contact in the To field As you type matching contacts appear Tapa contact to select it 6 Tap the composition text box and enter your message using the on screen keyboard 7 Fora multimedia message press Menu 1 and then tap Attach to select the media file to attach to the message 8 Tap Send or Send MMS Deleting a message thread Tap and hold the message thread then tap Delete thread in the menu that opens or press Menu and then tap Delete threads to delete all message threads from the window Replying to messages If you are working in a message window messages that you receive are displayed in it Otherwise you receive a new message notification and a new message icon appears in the Status bar See Trimble Juno T41 User Guide 27 Managing notifications page 23 When you tap the new message notifica
28. e and maximum or lesser gain approved for the transmitter by Industry Canada To reduce potential radio interference to other users the antenna type and its gain should be so chosen that the equivalent isotropically radiated power e i r p is not more than that necessary for successful communication Conformement a la r glementation d Industrie Canada le present metteur radio peut fonctionner avec une antenne d un type et d un gain maximal ou inf rieur approuv pour l metteur par Industrie Canada Dans le but de r duire les risques de brouillage radio lectrique a l intention des autres utilisateurs il faut choisir le type d antenne et son gain de sorte que la puissance isotrope rayonn e quivalente p i r e ne d passe pas l intensit n cessaire a l tablissement d une communication satisfaisante Licence exempt This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Le pr sent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence L exploitation est autoris e aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radio lectrique subi meme si le
29. e the settings 3 To capture the photo tap the Shutter icon on the screen or tap and hold the Shutter icon to focus when the photo is in focus the focus indicators in each corner turn green The camera takes the photo when you lift your finger off the Shutter icon The photo you just took is displayed for a moment and then is displayed as a thumbnail which you can tap to open in the Gallery Photos are stored as jpg files To cancel taking the photo slide your finger off the Shutter icon and then lift your finger off the screen To view photos in the Gallery tap a thumbnail in the camera application to open the Gallery or in the Launcher tap Gallery Using the camera in Video mode 1 Start the camera and make sure the slider is in Video mode o oel 2 Adjust any other settings if required see Camera setting options page 37 3 Point the lens to frame where you want to start recording then tap the Start Video icon on the screen The video starts recording and the timer starts counting up to indicate the length of the video 4 To stop recording tap The video you recorded is displayed as a thumbnail which you can tap to open in the Gallery Videos are stored as 3GPP files N To close the camera application press the Back LA or the Home button To view videos in the Gallery tap a thumbnail in the camera application to open the Gallery or in the Launcher tap Gallery Camera setting options
30. ecycling Requirements The product contains a removable Lithium ion polymer battery RA Taiwanese regulations require that waste batteries are vs recycled Fa 78 cg 1G Be European Union Customers WEEE For product recycling instructions and more information please go to www trimble com ev shtml Recycling in Europe To recycle Trimble WEEE Waste Electrical and Electronic Equipment products that run on electrical power Call 31 497 53 24 30 and ask for the WEEE Associate Or mail a request for recycling instructions to Trimble Europe BV c o Menlo Worldwide Logistics Meerheide 45 5521 DZ Eersel NL Trimble Juno T41 User Guide 4 Contents Safety Information 2 22 cece eee aaah aaa aaa e LLALLA LDAA LLALLA LLLA LLALL LaaLa aLaaa Laan 6 FOS E e A E E E E R 6 RF Exposure Information SAR aana aa aaao aaan aoaaa aa LaaLa LaLa aaa Laa Laana aLaaa aa 6 AC Adaptor safety AY 7 Electrostatic discharge 2 2 ieee cece cece eee eee eee cece cece cece eeeeeeeeeceeceteeseeees 8 Battery safety cetas medi ewes ee dueedse cues ceteceddedectucsteddcc aet aeia adado 8 Storage card use 9 About the Trimble Juno T41 handheld 0 02 cece cece cee eee eee eeeeees 10 About this user guide 10 Use and care of the handheld 022 2 eee cece cece cee cece cece cece eeeeeeeeeeeseeeeees 10 Technical assistance a 11 Parts of the Juno T41 handheld
31. en or application not to any specific item on the screen To open options menus press the Menu button Not all screens have options menus if you press Menu ona screen that has no options menu nothing happens Some screens have more options menu items than can fit in the main menu tap More to open a menu of additional items Options menus contain items that apply to the current screen or to the application as a whole e Context menus contain tools that apply to a specific item on the screen To open a context menu tap and hold an item on the screen Not all items have context menus If you tap and hold an item that has no context menu nothing happens Trimble Juno T41 User Guide 20 Using the on screen keyboard In some applications the keyboard appears automatically In others it appears when you tapin a text entry field If you tap in a text field which already contains text the cursor is inserted at the point where you tapped and the insertion point tab appears To move the insertion point drag the insertion point by its tab Select a word or several words at a time to copy cut and paste text See Editing text below Tap the required keys on the screen to enter text What you type appears in the text field and in the strip above the keyboard When the keyboard has a suggestion for what you might be typing the word you are typing is underlined in the text field and the suggestions appear in orange in the strip above the keyb
32. es when you receive a phone call or notification media music videos and alarms You can select to use the same volume for calls and notifications or you can set the notification ringtone volume independently e Phone ringtone Select the ringtone to sound when you receive a phone call Tap a ringtone to listen to it e Notification ringtone Select the ringtone to sound when you receive a notification Tap a ringtone to listen to it e Audible touch tones Select to turn on tones when you use the phone to dial a number e Audible selection Select to play a sound when you tap buttons icons and other onscreen items e Screen lock sounds Select to play a sound when the screen is locked or unlocked e Haptic feedback Select to make the handheld vibrate briefly when you tap soft buttons and perform other actions Locking the screen You can set the screen on the handheld to lock to prevent others from using it 1 In the Launcher tap Settings Location 8 security 2 Ifyou have not set screen lock settings before or you have reset them to None tap Set up screen lock If you have already set a screen lock tap Change screen lock 3 Tap Pattern PIN or Password Follow the instructions that appear on the screens The next time you turn on the handheld or wake up the screen you must enter your PIN or password or draw your unlock pattern to unlock it Locking the phone You can set the SIM card to lock to prevent others
33. eyes with clean water and seek medical attention Do not rub your eyes If battery fluid gets onto your skin or clothing immediately use clean water to wash off the battery fluid WARNING Charge and use the rechargeable Lithium ion polymer battery only in strict accordance with the instructions Charging or using the battery in unauthorized equipment can cause an explosion or fire and can result in personal injury and or equipment damage To prevent injury or damage Do not charge or use the battery if it appears to be damaged or leaking Charge the Lithium ion polymer battery only in a Trimble product that is specified to charge it Be sure to follow Trimble Juno T41 User Guide 7 all instructions that are provided with the battery charger Discontinue charging a battery that gives off extreme heat or a burning odor Use the battery only in Trimble equipment that is specified to use it Use the battery only for its intended use and according to the instructions in the product documentation Storage card use The handheld provides a storage card slot providing an alternative storage location to the storage memory in the handheld WARNING Static electricity can harm electronic components inside your handheld To prevent static damage Discharge static electricity from your body before you touch any of the electronic components inside your device such as a memory module You can do so by touching an unpainted metal
34. for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Trimble s warranty as set out in the user manual accompanying this statement or as described in the warranty card accompanying the Product you purchased is in addition to any mandatory rights and remedies that you may have under the Australian Consumer Law Trimble Juno T41 User Guide 2 Official Language THE OFFICIAL LANGUAGE OF THESE TERMS AND CONDITIONS IS ENGLISH IN THE EVENT OF A CONFLICT BETWEEN ENGLISH AND OTHER LANGUAGE VERSIONS THE ENGLISH LANGUAGE SHALL CONTROL Registration To receive information regarding updates and new products please contact your local dealer or visit the Trimble website at www trimble com register Upon registration you may select the newsletter upgrade or new product information you desire Notices FCC Regulations This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to
35. from using the phone 1 In the Launcher tap Settings Location 8 security 2 Tap Set up SIM card lock 3 Tap Lock SIM card and enter a PIN To change the SIM card PIN tap Change SIM PIN To remove the SIM card lock tap Lock SIM card again to deselect it Trimble Juno T41 User Guide 25 Using the phone Use the Juno T41 handheld to make and receive phone calls You can enter a number to dial using the keypad see below or select a number from your Contacts list see Dialing a number from the Contacts list To make a phone call 1 Make sure that a SIM card is installed See Inserting and removing the SIM card page 16 2 Make sure that the phone is turned on See Turning on and turning off the integrated radios page 30 3 Do one of the following e Tap the Phone icon at the bottom of the Home screen e Tap the Phone application icon i in the Launcher e From Contacts or the Call log tap the Phone tab 4 Tap the numeric keys on the Phone tab to enter the phone number To dial an international number tap and hold the O key to enter the plus symbol Then enter the international prefix for the country followed by the full phone number 5 Tap Cal to dial the number that you entered 6 If required press the Volume Up Down button on the left side of the handheld to adjust the call volume To end a phone call tap pa When you receive a phone call the Incoming Call screen opens with the caller ID and
36. g Options loli c ccc cc cece cece cece cee eeeeeeeeeeeeeeeeeceeees 37 Safety Information Radio use Depending on the model the Trimble Juno T41 handheld contains a Bluetooth radio a Wi Fi radio and a cellular modem radio In some situations you may be required to turn off the radios For example aviation authority regulations restrict the use of wireless transmission devices on board aircraft To prevent the handheld from emitting radio signals do one of the following e To turn off the handheld press and hold the Power button for 3 seconds to display the Phone options menu then tap Power off e To put the handheld in airplane mode press and hold the Power button for 3 seconds to display the Phone options menu then tap Airplane mode This mode turns off all wireless connections e To turn off the Bluetooth Wi Fi and wireless cellular modem radios only a Onthe Homescreen tap Settings then tap Wireless amp networks b If any radios are on tap them to turn them off Note You may need to deactivate the Wi Fi and or Bluetooth radio in the handheld if the country in which you are working does not approve the use of Wi Fi and or Bluetooth wireless technology If you are unsure about whether the Juno T41 handheld s radios are approved for use in your country check with your Trimble reseller RF Exposure Information SAR This device meets the government s requirements for exposure to radio waves This
37. held provides an external GNSS antenna port which is suitable for use in most conditions This port is suitable for GPS antennas only CAUTION The presence of any dust or moisture in the external antenna port may cause the external antenna to not work To prevent dust or moisture entering the external antenna slot take care when using the handheld with an external antenna in wet or dusty conditions To use an external antenna you must configure antenna settings in the GNSS field software once you have connected the external antenna to the handheld Refer to the relevant software documentation for details Using the camera Some models of the Juno T41 handheld contain an integrated 8 megapixel digital camera with geotagging and dual LED flash which you can use to capture photos or video Starting the camera application 1 Inthe Launcher tap Camera 2 Make sure that the protective lens cover is clean wipe it with a microfiber cloth before taking pictures Displaying the camera controls The camera controls are displayed on the right side of the screen See Camera setting options page 37 Trimble Juno T41 User Guide 35 Using the camera in Still mode To take a photo a 1 Start the camera and make sure the slider is in Still mode oo s 2 Use the view finder to frame the photo you want to capture and adjust any other settings if required see Camera setting options page 37 The preview image changes as you chang
38. ials and workmanship Product Software Product software whether built into hardware circuitry as firmware provided as a standalone computer software product embedded in flash memory or stored on magnetic or other media is licensed solely for use with or as an integral part of the Product and is not sold The terms of the end user license agreement as included below govern the use of the Product Software including any differing limited warranty terms exclusions and limitations which shall control over the terms and conditions set forth in the limited Product warranty Warranty Remedies If the Trimble Product fails during the warranty period for reasons covered by this limited warranty and you notify Trimble of such failure during the warranty period Trimble will repair OR replace the nonconforming Product with new equivalent to new or reconditioned parts or Product OR refund the Product purchase price paid by you at Trimble s option upon your return of the Product in accordance with Trimble s product return procedures then in effect How to Obtain Warranty Service To obtain warranty service for the Product please contact your Trimble dealer Alternatively you may contact Trimble to request warranty service at 1 408 481 6940 24 hours a day or email your request to trimble_support trimble com Please be prepared to provide your name address and telephone numbers proof of purchase a copy of this Trimb
39. ic fields by way of health protection The limits are part of extensive recommendations for the protection of the general public These recommendations have been developed and checked by independent scientific organizations through regular and thorough evaluations of scientific studies The unit of measurement for the European Council s recommended limit for mobile devices is the Specific Absorption Rate SAR and the SAR limit is 2 0 W kg averaged over 10 gram of body tissue It meets the requirements of the International Commission on Non lonizing Radiation Protection ICNIRP For body worn operation this device has been tested and meets the ICNIRP exposure guidelines and the European Standard EN 62311 and EN 62209 2 for use with dedicated accessories Use of other accessories which contain metals may not ensure compliance with ICNIRP exposure guidelines Canada This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications Le present appareil num rique n met pas de bruits radio lectriques depassant les limites applicables aux appareils numeriques de Classe B prescrites dans le reglement sur le brouillage radio lectrique dict par le Ministere des Communications du Canada Antenna Statement Under Industry Canada regulations this radio transmitter may only operate using an antenna of a typ
40. ign it a static IP address see below e P settings If you select Use static IP you can use the IP settings to enter an IP address and other network settings for the handheld manually rather than using the DHCP protocol to obtain network settings from the Wi Fi network itself Connecting to a Bluetooth enabled device The Juno T41 handheld has an integrated Bluetooth radio that you can use to establish a wireless connection to other Bluetooth devices that are within range Using a Bluetooth connection you can communicate with devices such as cellular phones office computers other handhelds and Bluetooth enabled laser rangefinders and barcode scanners You can also communicate with peripheral devices that use Bluetooth adaptors instead of serial or USB connections To connect to a Bluetooth device you must turn on the handheld s Bluetooth radio and set up a paired Bluetooth connection between the two devices See Working with paired Bluetooth enabled devices page 33 Turn off the Bluetooth radio when it is not in use to extend the charge of the handheld battery You may also be required to turn Bluetooth off in some locations See Turning on and turning off the integrated radios page 30 To turn on the Bluetooth radio 1 In the Launcher tap Settings Wireless 8 networks 2 Make sure the Bluetooth radio is turned on If it is not tap Bluetooth to turn it on 3 The Juno T41 handheld has a generic name by default which is v
41. ireless amp networks Make sure Wi Fi is turned on If it is not tap Wi Fi to turn it on In the Wi Fi settings screen tap Add WiFi network Enter the network SSID eee DE IT If the network is secured tap Open under Security and select the type of security for the network Enter the password and other security details for the network 6 Tap Save The handheld connects to the wireless network automatically when you are within range Forgetting a Wi Fi network You can make the handheld forget about the details of a Wi Fi network that you added for example if you do not want the handheld to connect to it automatically or if it is a network that you no longer use In the Launcher tap Settings Wireless amp networks Make sure Wi Fi is turned on If it is not tap Wi Fi to turn it on In the Wi Fi settings screen tap and hold the network you want the handheld to forget A Wo por p Tap Forget network Trimble Juno T41 User Guide 31 Advanced Wi Fi settings To access advanced Wi Fi settings in the Wi Fi settings screen press Menu and then tap Advanced You can set e The Wi Fi sleep policy to specify when the Wi Fi radio disconnects If this is set to Never the Wi Fi radio uses more battery power e The MAC Media Access Control address of the handheld when connecting to Wi Fi networks e The IP address assigned to the handheld by the Wi Fi network you are connected to unless you use the IP settings to ass
42. isible to other devices when you connect to them You can change the name so that it is more recognizable Tap Bluetooth settings then tap Device name and enter a sensible name for the handheld Tap Ok Status bar icons indicate Bluetooth status Working with paired Bluetooth enabled devices Pairing the handheld with another Bluetooth enabled device creates a permanent security bond between the devices which helps to exchange information securely between the devices The paired relationship is established when two devices create and exchange a link key Once the relationship is established the handheld and the other Bluetooth device only need to have their Bluetooth radios turned on to exchange information they do not need to be visible to other devices You must pair the handheld with a device before you can connect to it Once you pair the handheld with a device they stay paired unless you unpair them Trimble Juno T41 User Guide 32 To pair with a Bluetooth device 1 In the Launcher tap Settings Wireless amp networks 2 Make sure the Bluetooth radio is turned on If it is not tap Bluetooth to turn it on 3 Tap Bluetooth settings The handheld lists the Bluetooth devices it can detect If the device you want to connect to is not listed make sure it is discoverable refer to the documentation for the device 4 To manually scan for discoverable devices tap Scan for devices 5 To set up a paired connection to a device
43. le warranty a description of the nonconforming Product including the model number and an explanation of the problem The customer service representative may need additional information from you depending on the nature of the problem Warranty Exclusions and Disclaimer This Product limited warranty shall only apply in the event and to the extent that i the Product is properly and correctly installed configured interfaced maintained stored and operated in accordance with Trimble s applicable operator s manual and specifications and ii the Product is not modified or misused This Product limited warranty shall not apply to and Trimble shall not be responsible for defects or performance problems resulting from i the combination or utilization of the Product with hardware or software products information data systems interfaces or devices not made supplied or specified by Trimble ii the operation of the Product under any specification other than or in addition to Trimble s standard specifications for its products iii the unauthorized installation modification or use of the Product iv damage caused by accident lightning or other electrical discharge fresh or salt water immersion or spray outside of Product specifications or exposure to environmental conditions for which the Product is not intended v normal wear and tear on consumable parts e g batteries or vi cosmetic damage Trimble does not wa
44. ming Connecting to an office computer Connect the handheld to an office computer to transfer information settings and files from one device to the other or to install software onto the handheld Connect the handheld to a computer using a USB cable To protect your data Trimble recommends that you regularly copy important data to an office computer When you connect the handheld a computer make sure you follow the computer s instructions for connecting and disconnecting USB devices to avoid damaging or corrupting files Note The Juno T41 handheld uses the Media Transfer Protocol MTP for transferring data between the handheld and a computer For the Microsoft Windows XP operating system Windows Media Player 10 or later must be installed on the computer to provide access to MTP devices such as the Juno T41 handheld For the Windows Vista and later operating systems the MTP drivers are already provided by Microsoft and should be found automatically Trimble Juno T41 User Guide 28 1 Connect the handheld to the computer using the USB cable that you received with the handheld 2 The AutoPlay window opens on the computer Select Open device to view files The Juno T41 is listed as a portable device connected to the computer 3 Copy or move files as required between the handheld and the computer Using the integrated radios to connect to other devices Some models of the Juno T41 handheld include an integrated Bluetooth
45. ng the text you want to edit The cursor is inserted where you tapped and has an orange tab you can use to drag it if you need to move it To select text tap and hold the text or word and then tap Select word or Select all The selected text is highlighted in orange with a tab at each end of the selection You can drag either selection tab to expand or reduce the range of selected text To deselect the text tap any unselected text in the same or in another text field or press the Back button Trimble Juno T41 User Guide 21 3 Tap the selected text to open a menu which gives you options to cut or copy your selection or if you have previously cut or copied text paste You can also enter text by typing over the selected text or tap Delete to delete the selected text 4 Press the Back button to close the keyboard Managing notifications Notification icons appear you when you have new messages calendar events and alarms as well as ongoing events such as when call forwarding is on or the current call status Depending on your settings you may also hear a notification sound the phone may vibrate and LEDs may flash For information on these settings see Sounds page 26 When you receive a notification its icon appears in the Status bar along with a summary that appears briefly For a description of notification icons see Status indicators page 18 To open the Notifications panel to view a list of all your notifications
46. oard The boldfaced suggestion at the left of the strip is the keyboard s best suggestion You can drag the strip to the left to bring any additional suggestions into View Tap space or a punctuation mark to enter the boldfaced suggested word If you tap the space key the suggestion strip offers a series of punctuation marks you can tap to replace the space with Or tap another suggested word to enter it If you tap a word that is not in the system or user dictionary it is entered and you are prompted to tap the word again if you want to add it to the user dictionary Tap the Delete key a to delete characters to the left of the cursor To enter numbers tap the 123 key To return to letters tap ABC To enter symbols and other characters tap and hold one of the top row keys and then slide you finger up to the list of options that appears To select an option lift your finger when you reach it to enter the number indicated in black on that key For example tap and hold a vowel or the C N or S key to open a small window where you can drag onto the accented vowel or other alternate letter you want to use To view additional symbols tap the Alt key on the numeric keyboard Tap it again to switch back Tap and hold the Period key or tap and hold a number or symbol key to select other common symbols To close the keyboard tap the Back button Editing text To edit text in text fields 1 2 Tap the text field containi
47. ogle search for searching your Xx handheld and the Internet In some applications it opens a search box for searching within the application Power Turns off the screen Opens a menu with options for Airplane mode for Silent mode and for powering off the phone Volume Up Down When a call is in progress it increases or decreases the call volume Quickly increases When the phone is ringing it silences the ringer On the Home the ringtone screen when no call is in progress it increases or decreases the volume to ringtone volume or sets the phone to be silent or to vibrate instead maximum or of ringing In other applications it controls the volume of music minimum spoken directions and other audio Entering information Depending on the program or application you are using you can enter information in several ways as described below Input method Description Synchronizing Connect the handheld to an office computer to exchange information between the handheld and the office computer For more information see Connecting to an office computer page 29 Writing Use your finger or a stylus like a pen to write directly on the screen Typing Use the keyboard input panel to enter typed text by tapping keys on the on screen keyboard Recording Create a recording Using the menus The Android mobile technology platform has two kinds of menus e Options menus contain tools that apply to the activities of the current scre
48. ou cannot use it to save data e Internal storage is used for storing applications and private app data e Internal SD card is similar to the hard disk in a computer and is used for storing data and or apps e Removable SD card refers to micro SD cards inserted into the handheld s removable SD card slot The Juno T41 handheld s internal storage is where most applications and private data for those applications are stored The operating system manages and carefully guards internal storage because it can contain your private information you cannot view its contents when you connect the handheld to a computer with a USB cable The handheld s internal SD card sometimes just called SD card is the primary non removable storage for data files Some applications are also designed to be stored on this card rather than in internal storage by default or as an option This storage medium is actually an internal eMMC component It is referred to as an SD card and mounted as sdcard in order to maintain Android Trimble Juno T41 User Guide 13 compatibility When the Juno T41 handheld is connected to a computer see Connecting to an office computer page 29 you can copy files to and from the internal SD card The handheld also has a slot for a removable SD card When a removable card is inserted it is mounted as removablesdcard Like the internal SD card this storage device is accessible when the Juno T41 handheld is connected to a computer
49. ou sseeees sass et eseGe anne detest eee net a aaa 26 Locking the phone 22 2 2 e cece eee cee cee eee cece cece eee eee DDALL LaL Laaa Laana 26 BATAAN 27 Messaging 0000000000000000 0000000000000000 00002 a a000 000222222 a nanna 28 Connecting to an office computer aa eee eee ee eee eee eee eee ee LaaLa aaraa n naa 29 Using the integrated radios to connect to other devices e cece eee eee ce ee eeeeee 30 Turning on and turning off the integrated radios e ccc cece eee eee eee ee eee 30 Connecting to a cellular network from the modem aana aaa n aan2aaa 30 Connecting to a Wi Fi access point oaaao a 31 Connecting to a Bluetooth enabled device eee cece e eee cece cece ee ceeceeeee 33 Accessing a corporate network aoaaa aaa aaa e eee eee e eee e cece cece ee ceececeeseeeeeseees 34 Using the GNSS receiver 36 Using an external GNSS antenna 022 22 a 36 Using the camera _ 22 2 2 aaao aaa aaa aaa aaa aLaaa cece cece cece cece cece eee eeeeeseeseeeeeeeseeseeeees 36 Starting the camera application _ 2 22 22 ieee aoaaa eee eee eee cece e eee aaan aana naan 36 Displaying the camera controls _ 22 2 2 aoaaa aoaaa aoaaa aoaaa eee eee eee cee ceeceeceteeeeeees 36 Using the camera in Still mode U o eee cee cece eee cece eeeeeeeeeeeees 37 Using the camera in Video mode 2 2 22 a 37 Camera settin
50. radio and Wi Fi radio and provide a number of options for connecting to networks and other devices Some models also include an integrated cellular modem for sending and receiving data and support voice calls and text messaging To use the Wi Fi or Bluetooth radio or the cellular modem you need to turn it on see Turning on and turning off the integrated radios below Using a data connection from your local cellular provider the Juno T41 handheld s integrated cellular modem can be used to connect to the Internet send and receive messages including email SMS or instant messages or to send and receive files and other data to and from the office directly in the field You can use the handheld s integrated Wi Fi radio to connect to the Internet or a corporate network using a connection to a Wi Fi access point hotspot You can use Bluetooth wireless technology to connect directly to other Bluetooth enabled devices such as a headset laser rangefinder or a barcode scanner that are within range typically within 5 m to 10m of the handheld This section describes how to enable the radios and the main connectivity options available Use the table below to identify the wireless connection type you want to make and then follow the steps provided Connection method To See Cellular modem Connect to a cellular network page 30 Wi Fi Connect to a Wi Fi access point page 31 Bluetooth wireless technology Connect to another Bluetoo
51. re guidelines This device is compliant with SAR for general population uncontrolled exposure limits in ANSI IEEE C95 1 1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C For body worn operation this device has been tested Trimble Juno T41 User Guide 5 and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 0 5 cm from the body Use of other accessories may not ensure compliance with FCC RF exposure guidelines If you do not use a body worn accessory and are not holding the device at the ear position the handset a minimum of 0 5 cm from your body when the device is switched on Exposure to radio frequency radiation from Bluetooth and Wi Fi transmitters This device is approved as a portable device with respect to Radio Frequency RF exposure compliance The radiated output power of the internal wireless radio transmitters is less than 100 milliwatt which results in exposure levels far below the FCC radio frequency exposure limits even when operated in close proximity to the body The internal wireless radios operate within guidelines found in international radio frequency safety standards and recommendations which reflect the consensus of the international scientific community Trimble therefore believes the internal wireless radios are safe for use by users The level of electromagnetic energy
52. rrant or guarantee the results obtained through the use of the Product or Software or that software components will operate error free NOTICE REGARDING PRODUCTS EQUIPPED WITH TECHNOLOGY CAPABLE OF TRACKING SATELLITE SIGNALS FROM SATELLITE BASED AUGMENTATION SYSTEMS SBAS WAAS EGNOS AND MSAS OMNISTAR GPS MODERNIZED GPS OR GLONASS SATELLITES OR FROM IALA BEACON SOURCES TRIMBLE IS NOT RESPONSIBLE FOR THE OPERATION OR FAILURE OF OPERATION OF ANY SATELLITE BASED POSITIONING SYSTEM OR THE AVAILABILITY OF ANY SATELLITE BASED POSITIONING SIGNALS THE FOREGOING LIMITED WARRANTY TERMS STATE TRIMBLE S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDIES RELATING TO THE TRIMBLE PRODUCT EXCEPT AS OTHERWISE EXPRESSLY PROVIDED HEREIN THE PRODUCT AND ACCOMPANYING DOCUMENTATION AND MATERIALS ARE PROVIDED AS IS AND WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY KIND BY EITHER TRIMBLE OR ANYONE WHO HAS BEEN INVOLVED IN ITS CREATION PRODUCTION INSTALLATION OR DISTRIBUTION INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE TITLE AND NONINFRINGEMENT THE STATED EXPRESS WARRANTIES ARE IN LIEU OF ALL OBLIGATIONS OR LIABILITIES ON THE PART OF TRIMBLE ARISING OUT OF ORIN CONNECTION WITH ANY PRODUCT BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON DURATION OR THE EXCLUSION OF AN IMPLIED WARRANTY THE ABOVE LIMITATION MAY NOT APPLY TO YOU Limitation of Liability TRIMBLE S
53. side your device such as a memory module You can do so by touching an unpainted metal surface To insert a memory card 1 Turn off the handheld See Turning on and turning off the handheld page 13 2 Ina dust free indoor environment remove the two small screws to remove the memory card slot cover on the left side of the handheld Insert the memory card into the card slot with the gold contacts facing up 4 Replace the cover tightening the two small screws 5 When you select the Save As option in an application the memory card appears in the list of available storage locations as removablesdcard Trimble Juno T41 User Guide 14 Note Do not store required data or applications to a memory card if the card will be removed Data saved to a memory card is available only when the card is inserted in the handheld Inserting and removing the SIM card CAUTION The SIM card and its contents can be easily damaged by scratches or bending Use caution when inserting or removing the card CAUTION The presence of any dust or moisture in the SIM card slot may adversely affect the device and void your Trimble warranty To prevent dust or moisture entering the SIM card slot When inserting or removing a SIM card place the handheld on a dust free indoor surface N WARNING Static electricity can harm electronic components inside the handheld To prevent static damage discharge static electricity from your body before you touch
54. ssing a corporate network Use a Virtual Private Network VPN connection to access a corporate network or Intranet VPNs enable you to connect to the resources inside a secured local network from outside that network Before you begin obtain the following information from your network administrator Trimble Juno T41 User Guide 33 username and password domain name host name or IP address of the VPN server To add a VPN 4 In the Launcher tap Settings Wireless amp networks VPN settings Tap Add VPN then tap the type of VPN to add In the screen that opens follow the instructions from your network administrator to configure each component of the VPN settings Tap the Menu button then tap Save The VPN is added to the list on the VPN settings screen To connect to a VPN 1 2 3 In the Launcher tap Settings Wireless amp networks VPN settings The VPNs configured in the handheld are listed on the VPN settings screen Tap the VPN that you want to connect to Enter any requested security details and then tap Connect When you are connected to a VPN an ongoing notification appears in the Status bar If you are disconnected you receive a notification that you can use to return to the VPN settings screen so that you can reconnect to it See Managing notifications page 23 To disconnect from a VPN open the Notifications panel and tap the ongoing notification for the VPN connection To edit a VPN
55. surface WARNING The presence of any dust or moisture in the memory card slot may adversely affect the device and void your Trimble warranty To prevent dust or moisture entering the memory card slot Make certain that the storage card slot door is attached correctly when you are using the handheld outdoors When inserting or removing a memory card place the handheld on a dust free indoor surface Trimble Juno T41 User Guide 8 About the Trimble Juno T41 handheld The Trimble Juno T41 rugged handheld combines a high sensitivity GNSS receiver with depending on the model of handheld an integrated 3 75G cellular modem Bluetooth wireless technology and Wi Fi connectivity The Juno T41 handheld is powered by the Android 2 3 4 operating system is rated IP65 or IP68 depending on the model and has an integrated 8MP camera with geotagging and dual LED flash The integrated GNSS receiver provides accurate 2 4 meter positioning information with postprocessed or real time differential corrections For more information see Using the GNSS receiver page 36 About this user guide This user guide describes how to set up and use the Juno T41 handheld The information in this guide supplements the information in the Juno T41 Quick Start Guide which you received with the handheld Even if you have used other Global Navigation Satellite System GNSS or Global Positioning System GPS products before Trimble recommends that you
56. system notification or operating system notification battery is not charging Solid red Low battery charge Flashing red Low battery charge operating system notification Solid green Battery fully charged Flashing green Battery fully charged operating system notification Avoid keeping the battery at full charge at high temperatures For more information see Use and care of the handheld page 10 Note The life of the battery can be significantly shortened if power is constantly supplied to the handheld To avoid this issue connect the handheld to an external power source only when the battery requires charging Once fully charged disconnect the external power source and allow the battery to discharge through normal use Turning on and turning off the handheld To turn on the handheld press the Power button until the screen lights up To completely shut down the handheld press and hold the Power button until the Phone options menu appears and then tap Power off All running applications are shut down and the handheld is completely turned off You can also use the Phone options menu to put the handheld into silent mode or airplane mode Checking the level of battery power To check the level of battery power remaining at any time while the handheld is on 1 On the Home screen tap the Launcher icon HH 2 Inthe Launcher tap Settings About phone 3 Tap Status The Status screen shows the battery status and battery le
57. tap it in the list of Bluetooth devices If you are prompted to enter a password You will need to obtain this from the other device If the pairing is successful the handheld connects to the device The device shows as connected in the list You can easliy connect to the paired device in the future by tapping it in the list of Bluetooth devices Disconnecting from a Bluetooth device Tap the connected device in the list of Bluetooth devices on the Bluetooth settings screen then tap OK to confirm that you want to disconnect Unpairing a Bluetooth device You can unpair a Bluetooth device to delete all pairing information about it Tap and hold the device in the list of Bluetooth devices on the Bluetooth settings screen then tap Unpair or Disconnect amp unpair Making the handheld visible discoverable to other Bluetooth devices To allow other Bluetooth enabled devices to connect to the handheld or if the handheld will not connect to or pair with another device you are attempting to connect to you must make the handheld visible this is sometimes referred to as discoverable To make the handheld visible to other devices In the Launcher tap Settings Wireless amp networks Make sure the Bluetooth radio is turned on If it is not tap Bluetooth to turn it on EY mt e Tap Bluetooth settings 4 Tap Discoverable The handheld will be discoverable to other Bluetooth devices within range for 120 seconds Acce
58. th enabled device page 33 Wi Fi or cellular modem Access a corporate network Virtual Private Network page 34 Turning on and turning off the integrated radios 1 In the Launcher tap Settings Wireless 8 networks 2 Tap WiFi Bluetooth and or Phone to turn on the required radios Connecting to a cellular network from the modem Use the integrated cellular modem to connect to a cellular network and access the Internet ora company network Use this type of connection to access a background map server or for Internet and email access Trimble Juno T41 User Guide 29 Before you begin the steps below Trimble recommends that you e make sure that a SIM card is inserted in the handheld See Inserting and removing the SIM card page 16 e confirm that the modem can access the Internet directly If necessary contact your service provicer and confirm whether you must enter a user name password and domain details when connecting e make sure that you have the correct APN Access Point Name from your cellular provider The Juno T41 handheld attempts to automatically set the appropriate Access Point Name APN for your data connection based on your cellular provider s identity This process can take several minutes To configure cellular network settings 1 In the Launcher tap Settings Wireless 8 networks 2 Make sure the Phone is turned on If it is not tap Phone to turn it on 3 Tap Mobile networks 4 Ifyou need to create a
59. tion the Message window opens where you can reply to the message If Auto retrieve is not selected see Changing Messaging settings below tap Download to view the message If the message contains a media file tap Play to view watch or listen to it Tap and hold the media file to open a menu with an option for saving messages to your internal SD card Tap and hold a message to open a menu with a number of options for working with the message and its sender s information Changing Messaging settings 1 Tap the Messaging icon y in the Launcher 2 Pressthe Menu button and then tap Settings You can specify the following settings e Delete old messages When selected older messages in a thread are deleted when a set limit is reached Set limits using e Text message limit Set the number of messages to save per thread of text messages e Multimedia message limit Set the number of messages to save per thread of multimedia messages e Auto retrieve When not selected only the heading of multimedia messages is downloaded which you can then tap to open a menu to download the whole message This is useful for controlling how much data you download for example when connected to a slow data network e Roaming auto retrieve When not selected only the header of multimedia messages is downloaded when connected to other carrier s data networks This is useful for avoiding unexpected charges if your contract has limits on data roa
60. tness control to configure power saving settings for the backlight Use the brightness sliders to adjust the display brightness To open the Display settings 1 Inthe Launcher tap Settings then tap Display 2 To set the screen brightness tap Brightness then select Automatic brightness or deselect Automatic brightness and use the slider to set the brightness level 3 Select or deselect Auto rotate screen to turn on or off automatic screen rotation when the handheld is turned 4 Tap Animation to set screen animations as required 5 Tap Screen timeout and then select the required screen idle timeout duration Note If the screen timeout is set to Never the handheld will only turn off if you press the Power button Use this option with caution Leaving the handheld on for long periods of time will shorten battery life Trimble Juno T41 User Guide 24 Sounds Use the Sounds settings to set preferences for the speaker volume and system sounds such as the phone ringtone vibrations alerts notifications and alarms To open the Sounds settings screen in the Launcher tap Settings then tap Sound You can set e Silent mode to turn off all sound notifications including call and notification ringtones except the audio from music videos and other media and alarms e Vibrate Set to always never only when the handheld is in Silent mode or only when the handheld is not in Silent mode e Volume Set the volume of rington
61. to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada This Category Il radio communication device complies with Industry Canada Standard RSS 310 Ce dispositif de radiocommunication de cat gorie respecte la norme CNR 310 d Industrie Canada IMPORTANT NOTE IC Radiation Exposure Statement This EUT is compliant with SAR for general population uncontrolled exposure limits in IC RSS 102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 This equipment should be installed and operated with minimum distance 0 5 cm between the radiator amp your body This device and its antenna s must not be co located or operating in conjunction with any other antenna or transmitter The County Code Selection feature is disabled for products marketed in the US Canada CE a Caution e Risk of explosion if battery replaced by an incorrect type e Dispose of used batteries according to the instructions b Make sure the temperature for adapter will not be higher than 40 C CE SAR Compliance This device meets the EU requirements 1999 519 EC on the limitation of exposure of the general public to electromagnet
62. ut lifting your finger move your finger on the screen until you reach the target position Drag items on the Home screen to reposition them Quickly move your finger across the surface of the screen without pausing when you first touch it to scroll a page or a list up or down In some Calendar views swipe quickly across the screen to change the range of time visible Tap quickly twice on a webpage map or other screen to zoom Double tapping after pinching to zoom in some applications such as Browser reflows a column of text to fit the width of the screen In some applications such as Browser and Gallery place two fingers on the screen at once and pinch them together to zoom out or spread them apart to zoom in On most screens the orientation of the screen rotates with the phone as you turn it from upright to its side and back again You can turn this feature on and off see Display settings page 25 The handheld has the following buttons Button Al Home bd Menu Wt Back Tie U Press Press and hold Opens the Home screen If you re viewing the left or right extended Opens the most Home screen opens the central Home screen recently used applications screen Opens a menu with items relevant to the current screen or application Opens the previous screen you were working in If the onscreen keyboard is open the keyboard closes Trimble Juno T41 User Guide 19 ys Search On the Home screen opens Go
63. vel Trimble Juno T41 User Guide 12 Conserving power Trimble recommends that you do the following to reduce power consumption e Set the handheld to automatically turn off when idle For more information see Display settings page 25 e Reduce the brightness setting for the backlight For more information see Display settings page 25 e Turn off the integrated Bluetooth and Wi Fi radios and the handheld s cellular modem whenever you are not using them For more information see Turning on and turning off the integrated radios page 30 Note Do not disconnect from GNSS if you will be reconnecting within about five minutes A GNSS application can take up to 30 seconds to reactivate the integrated GNSS receiver so disconnecting to save power can cost time Resetting the handheld to factory defaults You can factory reset the Juno T41 handheld if you forget the password that you use to lock the device or to delete all of your personal data from the handheld s internal storage system and application settings and any downloaded applications Performing a factory data reset does not delete any system software updates 1 Onthe Home screen tap Settings then tap Privacy Factory data reset 2 If required select the checkbox to delete data on the SD card 3 Tap Reset phone Storing data The handheld has several types of memory available e Program memory is similar to the RAM in a computer and is used for running apps Y
64. y of miniature applications widgets to your Home screen for example a clock a music player a picture frame the Google search bar a power manager ora calendar that shows upcoming appointments Trimble Juno T41 User Guide 22 e Folders Add a folder where you can organize Home screen items or forexample a folder that contain all your contacts Your folders contents are kept up to date automatically To move an item on the Home screen 1 Tap and hold the item you want to move until it vibrates Don t lift your finger 2 Drag the item to a new location on the screen To drag the item onto another Home screen pane pause at the edge of the screen 3 When the item is where you want it lift your finger To remove an item from the Home screen 1 Tap and hold the item you want to move until it vibrates Don t lift your finger The Launcher icon changes to a Trash Can icon 2 Drag the item to the Trash Can icon 3 When the icon turns red lift your finger To change the Home screen wallpaper 1 Pressthe Menu button and tap Wallpapers or tap and hold an empty area of the Home screen and in the menu that opens tap Wallpapers 2 Tap Gallery to use a picture that you have captured using the camera or copied to your phone Tap Wallpapers to open a screen where you can sample the wallpaper images that come with the handheld 3 Tap Save or Set wallpaper To rename a folder Tap the folder to open it Tap and

Juno T41 - User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents