Operation Manual 05/15/2008
Contents
1. Ring Plus Operation and maintenance manual Before using the machine please read the attached operating instructions Carefully read the safety rules FOR HOUSEHOLD USE ONLY IMPORTANT SAFEGUARDS When using electrical appliances basic satety precautions should always be followed including the following 1 2 3 Read all instructions Do not touch hot surtaces Use handles or knobs To protect against tire electric shock and injury to persons do not immerse cord plugs or appliance in water or other liquid Close supervision is necessary when the appliance is used by or near children Unplug from outlet when not in use and before cleaning Allow to cool before putting on or taking off parts and before cleaning the appliance Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner Return appliance to the nearest authorized service facility for examination repair or adjustment The use of accessory attachments not recommended by the appliance manufacturer may result in fire electric shock or injury to persons Do not use outdoors not let cord hang over edge of table or counter or touch hot surfaces 10 Do not place on or near a hot gas or electric burner or in a heated Oven 11 Always attach plug to appliance first then plug cord into wall outlet To disconnect turn any control2. 26 CLEANING AND MAINT ENANGE uae i pac uh Vani p RE ebd ees 21 MAINTENANCE DURING OPERATION c0 ccsscccecescceeeeccecceaccecensceecenceecenaeeessaeeecenaeecenaeeeseaaeesenaeeessaaeesenaeeessuseessnaeeesnseeens 27 GENERAL MACHINE CLEANING T ree ea M D 27 28 zii 29 TROUBLESHOOTING 30 a RUCE ET 31 TECHNICAL DATA E GENERAL INFORMATION This coffee machine is made for brewing espresso coffee using coffee beans and it is equipped with a device to dispense steam and hot water The machine is designed for domestic use only and is not suitable for heavy or professional use Warning no liability is assumed for any damage caused by incorrect use not in accordance with the intended uses repairs not carried out by authorized customer service centers tampering with the power cord tampering with any part of the machine the use of non original spare parts and accessories failure to descale the machine or use at temperatures below 0 C 32 F IN THESE CASES THE WARRANTY IS NOT VALID FOR THE USER S SAFETY PLEASE FOLLOW THESE INSTRUCTIONS 1 THE WARNING TRIANGLE INDICATES ALL IMPORTANT INSTRUCTIONS CAREFULLY TO PREVENT SERIOUS INJURIES HOW TO USE THESE OPERATING INSTRUCTIONS Keep these operating instructions in a safe place and ma
3. cH ae ee ea A ee eee eee ee 10 COFFEE GRINDER ADJUSTMENT ssceoscssxesescesccccvacuscnccvensiseevsaewandosdmnnseveenneaanbendee 11 BEVERAGE DISPENSING mu rade 12 BREWING WITH WHOLE BEANS 12 BREWING WITH PRE GROUND 13 HOT MMS S IN IN Gece attests 14 STEAM e 15 MAKING CAPPUCCINO 16 MICK IOLANDA E E E 17 BEVERAGE SETTINGS 18 e AEE TL e EAEE A N A A EEEE AE 18 PROGRAMMING FROM THE BEVERAGE SETTINGS MENU cccceecccecceeccccecceceeceeceueeceeceaeeeesennaeeeeeennaeeeeeesneeeeeusnteeeeentats 18 PROGRAMMING THE MACHINE eene mnn 20 RINT EE 21 LANGUAGE MENU WATER HARDNESS MENU ACOUSTIC ALARM MENU FILTER ALARM MENU RINSE MENU CUP WARMER MENU CLOCK SETTING MENU MAINTENANCE eese eene nnne enne nnne 22 WATER FILTER MENU DESCALING MENU BREW GROUP WASHING ENERGY SAVING cn Tee d 23 TURN OFF DELAY TIMER SETTING PETON ON e 23 MAN IRIN cc 24 Be IN deb 24 BREW GROUP WASHING
4. of all types of coffee beans available on the market not including flavored or carmelized The machine automatically adjusts itself in order to optimize the extraction of the coffee ensuring perfect compression of the beans to obtain a creamy espresso coffee that is able to release all the aromas regardless of the type of coffee used The optimization process is a learning process that requires the brewing of a certain number of coffees to allow the machine to adjust the compactness of the ground coffee Attention should be given to special blends which require grinder adjustments in order to optimize the extraction of the coffee see page 11 COFFEE GRINDER ADJUSTMENT The machine enables a slight adjustment of the coffee grinder Coffee may be ground according to your own tastes The adjustment must be performed using the small pin located inside the coffee bean hopper This must be pressed down and turned using the supplied grinder adjustment key only Press and turn the pin one notch at a time You must brew 2 3 coffees before you will taste a difference The references located inside the bean hopper indicate the grind setting 8 BEVERAGE DISPENSING COFFEE BREWING CAN BE STOPPED AT ANY TIME BY PRESSING THE WP THE STEAM WAND MAY REACH HIGH TEMPERATURES DANGER OF SCALDING DO NOT TOUCH IT WITH BARE HANDS Check that all the containers are clean To carry out this operation follow th
5. to operate the side service door must be closed The tank must be removed and refilled with fresh drinking water Open the side service door and empty the drip tray located under the brew group WARNING WHENEVER THIS MESSAGE APPEARS BE SURE TO EMPTY THE DREGDRAWER AS WELL The water filter must be replaced in the following cases 1 60 liters of water have been dispensed 2 60 days have passed since its installation 3 20 days have passed after the machine s last use Note this message only appears when the filter alarm function has been set to see page 21 menu 2 4 The steam knob has been turned to the 7 position and either the Milk Island has not been installed or the carafe is not positioned correctly Install the Milk Island or position the carafe correctly Otherwise turn the knob until it is in the rest position e A descaling cycle must be performed on the machine s internal circuits see page 24 Press the Wl button PROBLEMS The machine does not turn on Hot water or steam is not dispensed Coffee has little crema The brew group does not come out The machine grinds the coffee beans but no coffee comes out see note The coffee is too weak see note Coffee is brewed slowly see note Coffee leaks out of the dispensing head The machine grinds the coffee but coffee does not brew CAUSES The machine is not connected to the power source The plug has
6. turn the cup the knob until it is in the rest position Place the cup beneath the Press the Qj button once dispensing head coffee dispensing begins After dispensing clean the wand as described on page 27 To brew 2 cappuccinos e froth two cups of milk by following step 1 to 6 brew two coffees by following steps 7 and 8 in this case press the Wl button twice MILK ISLAND OPTIONAL This device which may be purchased separately enables you to easily and comfortably prepare delicious cappuccinos Warning before using the Milk Island read the manual and all precautions carefully for correct use Milk Island 04 Type MKI001 Important note the quantity of milk in the carafe must never be below the MIN minimum level nor exceed the MAX maximum level Thoroughly clean all the Milk Island components after use To guarantee best results when preparing cappuccino we recommend using cold 0 8 C 32 45 F partially skimmed milk Milk Island 08 Type MKI002 de Fill the milk carafe with the quantity Place the milk carafe onto the base of milk desired between the MIN of the Milk Island Check that the b knob to the P and MAX levels indicated light on the base is green The machine will stop automatically after steaming continuously for 2 minutes To dispense more steam turn the knob to position and then back to the P position Wait for the milk to b
7. EN YOU WISH TO BREW THIS TYPE OF BEVERAGE ONLY INSERT ONE SCOOP OF GROUND COFFEE AT A TIME TWO CUPS OF COFFEE CANNOT BE DISPENSED AT THE SAME TIME The preparation of an espresso using pre ground coffee is shown in the example given below The customized option of using pre ground coffee is shown on the display Select the desired beverage by Select the function by pressing the A message reminds the user to navigating the click wheel with 000 button until the pre ground insert ground coffee into the your finger option appears Press the W bypass doser button to confirm Pour one scoop of ground coffee into Press the WP button to start the bypass doser using the brewing measuring scoop provided If brewing does not start within 30 seconds from the appearance of the message 3 the machine will return to the main menu and discard any pre ground coffee into the dregdrawer If no pre ground coffee is poured into the bypass doser only water will be dispensed If the dose is excessive or if 2 or more scoops of coffee are inserted the machine will not brew the beverage and the coffee in the bypass doser will be discarded into the dregdrawer 14 BEVERAGE DISPENSING HOT WATER DISPENSING DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS POSSIBLE THE HOT WATER STEAM WAND MAY REACH HIGH TEMPERATURES DO NOT TOUCH IT WITH BARE HANDS USE THE APPROPRIATE HANDLE ONLY Place a container beneath t
8. PRECAUTIONS FOR THE USE OF THE MACHINE Do not use the machine for purposes other than those indicated above in order to avoid danger Do not introduce any substances other than those indicated in the instruction manual During the normal filling of any reservoirs all nearby reservoirs must be closed Fill the water tank only with fresh drinking water Hot water and or any other liquid may damage the machine Do not use carbonated water Do not put fingers or any material other than coffee beans in the coffee grinder Before manipulating the coffee grinder turn of the machine s main switch and unplug the cord Do not put instant coffee or whole bean coffee in the ground coffee container Only use your finger when operating the LCD screen CONNECTION TO ELECTRICAL POWER The connection to the electrical network must be carried out in accordance with the safety regulations in force in the user s country The machine must be connected to a socket which is compatible with the type of plug installed on the machine suitably sized to comply with the ratings shown on the machine identification plate effectively grounded The power cord must not come into contact with any type of liquid danger of electric shocks and or fire be crushed and or come in contact with sharp surfaces be used to move the machine be used if damaged be handled with damp or wet hands be wound in a coil when the machine is being operated Be tampered
9. age by When the desired language is The machine starts and displays navigating the click wheel with displayed press all the messages in the selected your finger language Wait until the machine completes Once the warming phase 15 The machine is now ready to the warming phase completed a small quantity of water brew 15 dispensed Wait for this rinsing to be completed automatically Refer to page 21 to enable disable the rinsing function SETTING THE WATER HARDNESS The test strip can only be used for one measurement Intenza Aroma System zx e 2 3 Machine water hardness setting x e Immerse the water hardness test strip Check the water hardness value and set in water for 1 second the machine water hardness level page 21 the Intenza Aroma System page 7 INTENZA WATER FILTER To improve the quality of the water you use and to extend the life of your machine at the same time it is recommended that you install the water filter After installation select the water filter function under the maintenance menu see page 20 By setting the water filter status to ON the machine informs the user when the filter must be replaced Remove the water filter from its packaging immerse it vertically with the opening facing upwards in cold water and gently press its sides so as to let the air bubbles out Remove the small white filter from Set the Intenza Aroma Sys
10. d and electrical appliances Part 2 15 Particular requirements for appliances for heating liquids EN 60335 2 15 2002 A1 2005 Household and similar electrical appliances Electromagnetic fields methods for evaluation and measurement EN 50366 2003 2006 Household and similar electrical appliances safety Part 2 14 Particular requirements for kitchen machines EN 60335 2 14 2006 Electromagnetic compatibility EMC Requirements for household appliances electric tools and similar apparatus Part 1 Emission EN 55014 1 2000 A1 2001 A2 2002 Electromagnetic compatibility EMC Part 3 Limits Section 2 Limits for harmonic current emissions equipment input current 16A for phase EN 61000 3 2 2000 Electromagnetic compatibility EMC Part 3 Limits Section 3 Limitation of voltage changes voltage fluctuations and flicker in public low voltage supply systems for equipment with rated current lt 16 A for phase and not subject to conditional connection EN 61000 3 3 1995 A1 2001 Electromagnetic compatibility Requirements for household appliances electric tools and similar apparatus Part 2 Immunity Product family standard EN 55014 2 1997 A1 2001 Following the provision of the directives EC 73 23 EC 89 336 EC 92 31 EC 93 68 Gaggio Montano li 27 06 2007 Saeco International Group S p A Via Torretta 240 1 40041 Gaggio Montano B
11. e frothed When the desired quantity of froth has been reached turn the knob until it is in the rest position Remove the carafe using the Gently swirl the carafe and pour Position the cup with frothed handle the milk into the cup milk under the dispensing head Brew coffee into the cup de BEVERAGE SETTINGS Every beverage can be programmed according to your individual tastes QUICK PROGRAMMING You can program the quantity of coffee that will dispense into the cups when any beverage is selected Select the type of beverage you want to program then press and hold the Qj button until the display shows for example The machine dispenses coffee When the desired amount is reached press the Wl button again The display shows The dispensed quantity of coffee is memorized and replaces any previous settings PROGRAMMING FROM THE BEVERAGE SETTINGS MENU To adjust the settings for preparing beverages press the MENU button and select beverage settings by navigating the click wheel with your finger In this phase you can exit the programming mode see page 20 restore factory settings navigate the click wheel with your a finger to select mJ 2 1 save the new settings the quantity of coffee to brew the coffee temperature coffee prebrewing adjust the quantity of coffee to be ground adjust the coffee temperature adjust coffee prebrewing The following pa
12. e instructions in the Cleaning and Maintenance section see page 27 To brew 2 cups the machine dispenses the first coffee and briefly stops dispensing in order to grind the second serving of coffee Coffee dispensing 15 then restarted and completed BREWING WITH WHOLE BEANS This procedure shows how to brew an espresso To brew another type of coffee select it by navigating the click wheel with your finger Use appropriate espresso or coffee cups so that the coffee will not overflow Adjust the drip tray according to Place one cup if you want one Select the desired beverage by the the height of the cup s coffee only Place two cups if you navigating the click wheel with want two coffees your finger If desired select the quantity of Press the i button once for 1 coffee to be ground by pressing the cup and twice for 2 cups The 0 0 0 button one or more times machine begins dispensing the selected beverage The machine stops dispensing automatically based on the quantity determined by the manufacturer It is possible to customize this quantity see page 18 BREWING WITH PRE GROUND COFFEE The machine allows you to use pre ground and decaffeinated coffee Pre ground coffee must be scooped into the bypass doser next to the coffee bean hopper Only use coffee that is ground specifically for espresso machines and never coffee beans or instant coffee WARNING ONLY PUT PRE GROUND COFFEE INTO THE BYPASS DOSER WH
13. ey Lubricant for the Power cord brew group INSTALLATION 5 STARTING THE MACHINE Make sure the power button is not pressed and the machine is turned off Check the machine features on the label on the bottom of the appliance rs a N 3 Remove the coffee bean hopper Close the lid pushing it down Remove the water tank lid completely Install the water filter as Fill the hopper with coffee beans recommended on page 7 t Fill the tank with fresh drinking Insert the plug into the socket Place a container beneath the hot water Do not exceed the max located on the back of the machine water steam wand level indicated on the water tank and insert the other end into a Once filled place the tank back power outlet with suitable current into the machine The machine will automatically prime the water circuit The machine is now ready for use Water may not dispense into the container when the machine is self priming This should be considered normal Press the main power button to the ON position n INSTALLATION SETTING THE LANGUAGE When the machine is switched on for the first time it requires the selection of the desired language This allows you to adjust the parameters of the beverages to the typical parameters of the country where the machine is used This is why some languages are differentiated also by country Select the desired langu
14. g to your individual preferences 1 Press the MENU button 2 Navigate the click wheel with your finger to select the functions change the function settings Press the Wl button to confirm the selection save the new settings Beverage settings see page 18 Machine settings see page 21 Maintenance settings see page 22 Energy saving stand by see page 23 Special functions see page 23 To exit the programming mode MACHINE SETTINGS To change the machine operation settings press the MENU button select machine settings and press the Qj button Navigate the click wheel with your finger Change the display language Change the machine water hardness setting mm With the water hardness function you can adjust your machine to the WEJ level of hardness of the water you use so that the machine will request descaling at the right time Measure the water hardness as shown on page 6 Activate deactivate the acoustic tone each time a button is pressed Activate deactivate the message to replace the water filter By activating this function the machine informs the user when the water filter needs to be replaced weer Clean the internal circuits in order to guarantee that beverages are only MEE made with fresh water This function is activated by default by the manufacturer Activate deactivate the cup warmer located on the top of the machine A B warm c
15. ge describes how to program coffee beverages the programmable settings for each beverage may differ depending on the type of beverage Check that the water tank and Press the MENU button Select beverage settings Press coffee bean hopper are full place the Wl button to confirm the cup under the dispensing head When the settings are changed the message on the display starts flashing When the changes are saved the message stops flashing Select the beverage to program Press the 0 0 O button a few times Press the Wl button to confirm to adjust the quantity of coffee to be ground or select the use of pre ground coffee Press the WI button to save Change the coffee quantity by Press the Wl button for more Change the temperature setting navigating the click wheel with your two seconds to access the high medium low by navigating finger confirm with WP other programmable settings the click wheel with your finger Press the Wl button to save Prebrewing the grounds are slightly dampened before brewing to bring out the full aroma of the coffee and enhance the flavor Press the button to select the Change the prebrew value normal long off by navigating the prebrew setting click wheel with your finger Press the Wl button to save Press the MENU button to exit 20 PROGRAMMING THE MACHINE Some of the machine s functions can be programmed accordin
16. he MENU button select energy saving stand by and press the Qj button Navigate the click wheel with your finger Set the time which must pass before the machine enters the energy saving mode stand by By default the delay time for this function is set at 60 minutes Activate the switch on and energy saving mode reactivation times stand by for the specific days of the week Stand by function is always active and automatically switches the machine to the energy saving mode after the set time replacing timers set times To set the switch on and energy saving mode reactivation times stand by for Monday To set the switch on and energy saving mode reactivation times stand by for Tuesday To set the switch on and energy saving mode reactivation times stand by for Wednesday To set the switch on and energy saving mode reactivation times stand by for Thursday To set the switch on and energy saving mode reactivation times stand by for Friday To set the switch on and energy saving mode reactivation times stand by for Saturday To set the switch on and energy saving mode reactivation times stand by for Sunday SPECIAL FUNCTIONS This menu provides access to the machine s special functions Press the MENU button to access select special functions and press the WP button This menu includes a function which allows you to restore all factory settings This function is particularly important fo
17. he hot Press the 229 button Turn the knob to the water steam wand position The display shows brewing in Wait until the machine has When the machine has dispensed progress hot water dispensed the desired quantity of the desired quantity turn the knob water until it is in the rest position e To dispense another cup of hot water repeat this operation DISPENSING STEAM DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS POSSIBLE THE HOT WATER STEAM WAND MAY REACH HIGH TEMPERATURES DO NOT TOUCH IT WITH BARE HANDS USE THE APPROPRIATE HANDLE ONLY Place a container with the Turn the knob to the beverage to be frothed beneath position V the hot water steam wand The display shows brewing in Heat the beverage by gently progress steam swirling the container while steam the knob until it is in the rest Is dispensed position e Repeat the operation to froth another beverage After dispensing steam clean the steam wand as described on page 27 d BEVERAGE DISPENSING MAKING CAPPUCCINO DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS N POSSIBLE THE HOT WATER STEAM WAND MAY REACH HIGH TEMPERATURES DO NOT TOUCH IT WITH BARE HANDS USE THE APPROPRIATE HANDLE ONLY Fill 1 3 of the cup with cold milk Immerse the hot water steam wand in the milk Froth the milk by gently swirling When you have finished
18. ke them available to anyone else who may use the coffee machine For further information or in case of problems please refer to an authorized service center For Saeco customer service call 1 800 933 7876 in the U S or 1 514 385 5551 in Canada TECHNICAL DATA Nominal voltage See label on the appliance Power rating See label on the appliance Power supply See label on the appliance Shell material ABS Thermoplastic Size w x h x d 313 x 372 x 426 mm 12 60 x 14 57 x 15 75 in Weight 9 Kg 19 8 105 Cord length 1200 mm 47 24 in Control panel Front Water tank 1 7 liters 57 5 oz removable Coffee bean hopper capacity 250 grams 8 9 oz of coffee beans Pump pressure 15 bar Boiler Stainless steel Coffee grinder Ceramic Quantity of ground coffee 7 10 5 grams 0 25 0 37 oz Dregdrawer capacity 14 portions Safety devices Boiler pressure safety valve Double safety thermostat Subject to engineering and manufacturing changes due to technological developments Zu APPLIANCE Coffee bean hopper lid Pre ground bypass doser Cup warming surface Control panel 14 EX Power button SBS Service door Dispensing head EET Dregdrawer Drip tray grill Hot water steam knob Brew group Milk Island connection Drip tray Water tank Socket for power cord ACCESSORIES gt Pre ground coffee Intenza water filter Water hardness test strip measuring scoop and grinder adjustment k
19. lend has been changed a certain number of coffees must be brewed in order to allow the machine to optimize the parameters Please contact Saeco or an authorized service center for any problems not covered in the above table or when the suggested solutions do not solve the problem ADDITIONAL INFORMATION FOR THE CORRECT USE OF THE INTENZA WATER FILTER To correctly use the Intenza water filter please consider the following instructions 1 Store the Intenza water filter a cool area in which the room temperature ranges from 1 C to 50 C 34 F to 122 F Do not store it in direct sunlight 2 Carefully read the operating instructions and the safety warnings provided with each filter 3 Keep the filter instructions together with the manual 4 These instructions integrate those contained in the manual as they focus on the specific application of the filter in the machine SAFETY RULES El IN CASE OF EMERGENCY IMMEDIATELY UNPLUG THE CORD FROM THE OUTLET ONLY USE THE APPLIANCE Indoors For preparing coffee hot water and for frothing milk For domestic use This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance
20. n step 5 ai Ex i A 4 1 1 1 k i 1 N Place a container beneath the hot Turn the knob to the Ill water steam wand position M When the above message Pour the descaling solution into Press the Wl button to start appears the boiler is at the right the tank Insert the tank into the temperature machine When the solution is finished the following message appears on the display The machine begins to dispense The intervals are displayed in Remove the water tank rinse the descaling solution through the order to check the progress of the with fresh drinking water to hot water steam wand The descaling cycle eliminate traces of descaling dispensing occurs at predetermined solution then refill with fresh intervals in order to allow the drinking water solution to settle Insert the tank back onto the machine Rinse the machine s circuits by The machine performs the rinse When the rinse cycle 15 finished the pressing the Wl button cycle During the rinse cycle the above screen appears Then the machine may require the water tank display shows the maintenance to be filled screen Check the quantity of water contained in the tank and if desired install the water filter again or re insert the small white filter see page 7 When descaling is complete return to the main menu to brew beverages Turn the knob until it is in the rest position Brew Group Washi
21. ng MENU gt maintenance gt wash This function is used to clean the machine s internal circuits used for brewing coffee To rinse the brew group simply clean with water as shown on page 28 This wash completes the maintenance process of the brew group We recommend performing this cycle on a monthly basis or every 500 coffees using the Saeco tablets which can be purchased separately Note before performing this function make sure that 1 a large enough container is positioned under the spout 2 the appropriate tablet for cleaning the brew group has been inserted into the pre ground bypass doser 3 the water tank contains a sufficient quantity of water THE WASH CYCLE CANNOT BE INTERRUPTED A PERSON MUST BE PRESENT DURING THE OPERATION Please refer to page 22 to access Insert the cleaning tablet as shown Wait for the cycle to begin the group wash menu above Press the Wl button to confirm Press Wl to start You can check the status of the The brew group has been washed To cleaning cycle on the display exit the programming mode press the MENU button see page 20 CLEANING AND MAINTENANCE fray MAINTENANCE DURING OPERATION During normal operation the empty grounds message will appear This operation must be performed when the machine 15 on The message to empty the dregdrawer is displayed approximately every 15 coffee cycles If you remove grounds with the machine off or when n
22. not been plugged into the back of the machine The hole of the hot water steam wand is clogged The coffee blend is unsuitable or coffee is not freshly roasted The SBS dial is turned towards the left The brew group is out of place The dregdrawer is inserted The water tank is empty The brew group is dirty Rare event that occurs when the machine is automatically adjusting the dose Rare event that occurs when the machine is automatically adjusting the dose The coffee grind is too fine The brew group is dirty The dispensing head is clogged The opti dose adjustment is not at the optimal setting EW TROUBLESHOOTING SAFETY RULES SOLUTIONS Connect the machine to the power source Insert the plug into the machine s power socket Clean the hole of the hot water steam wand using a pin Change coffee blend Turn the SBS dial to the right Turn the machine on Close the service door The brew group is automatically placed in the correct position Remove the dregdrawer first then the brew group Fill the water tank and prime the circuit again Clean the brew group Brew a few coffees as described in the manual Brew a few coffees as described in the manual Adjust the grinder to a coarse grind see page 11 Clean the brew group Clean the dispensing holes with a soft cloth Change the opti dose adjustment see page 8 Note If dealing with an initial start up or if the coffee b
23. ologna Tel 39 0534 771111 Fax 39 0534 31025 www saeco com The manufacturer reserves the right to change the features of the product without prior notice Saeco International Group S p A Type SUP O82BR Cod15001590 Rev 00 del 15 05 08
24. ot signaled on the display the count coffee cycles is not reset For this reason the machine might display the empty grounds message even when the dregdrawer is not full Remove the dregdrawer Empty and clean it GENERAL MACHINE CLEANING The cleaning described below must be performed once a week Note if water remains in the tank for several days do not use it WARNING Never immerse the machine in water Switch off the machine and unplug Clean the tank and the cover Remove the drip tray empty and it wash it with soap and water Do not wash it in the dishwasher Remove the outer sleeve of the hot Remove and wash the wand water steam wand thoroughly rinse support then re insert it doser with a dry cloth it under running water then re insert Wipe the display it 28 CLEANING AND MAINTENANCE CLEANING THE BREW GROUP The brew group must be cleaned at least once a week Before removing the group remove the dregdrawer as shown on page 27 Wash the brew group with lukewarm water Lubricate the brew group after approximately 500 brewing cycles The brew group lubricant can be purchased through Saeco or authorized service centers WARNING Do not wash the brew group with harsh or abrasive detergents or chemicals which could prevent it from operating correctly Do not wash in the dishwasher Press the PUSH button to remove Wash the brew group and the filter Lubricate the brew group guides the bre
25. r restoring the basic parameters Note all custom settings will be lost and cannot be recovered 24 MAINTENANCE Descaling cycle MENU gt maintenance gt descaling gt execute nos This menu performs the automatic descaling cycle Descaling is necessary every 1 2 months when water dispenses more slowly than normal or when the machine indicates the need to descale The machine must be turned on and will automatically manage the dispensing of the descaling agent A PERSON MUST BE PRESENT DURING THIS OPERATION WARNING NEVER USE VINEGAR AS A DESCALER Please use Saeco descaling solution in your machine It has been specifically developed to preserve performance and functionality throughout the lifetime of the machine and to ensure with regular use a high quality delivered product Saeco descaling solution should be disposed of according to the manufacturer instructions and or the regulations in the country of use Note before starting a descaling cycle make sure that 1 a container of adequate size is available 2 the water filter if inserted has been removed Descaling is performed at a controlled temperature If the machine is cold you must wait until it has reached the right temperature otherwise you must cool the boiler as follows If the boiler needs to warm up the machine does so automatically When the heating phase is complete the open water steam knob message appears Then proceed as described i
26. rough the appliance s openings Danger Electrical Current Do not pull out the plug by yanking on the power cord or touching it with wet hands Warning Danger of burning when in contact with hot water steam and the hot water spout FAILURES Do not use the appliance if a failure has been verified or suspected for example after being dropped Any repairs must be performed by an authorized customer service center Do not use the appliance with a defective power cord The manufacturer or its customer service center will have to replace the power cord if damaged Caution Electrical Current Turn off the appliance before opening the service door Danger of burns SEFA MING DESCALING For cleaning the milk and coffee circuits use only recommended detergents provided with the machine These detergents must not be used for other purposes Before cleaning the machine the main switch must be turned to OFF 0 unplugged from the socket and cooled down Keep the appliance from coming into contact with splashes of water or immersing in water Do not dry the machine s parts in conventional or microwave ovens The machine and its components must be cleaned and washed after the machine has not been used for a certain period REPLACEMENT PARTS For safety reasons use only original replacement parts and original accessories WASTE DISPOSAL The packing materials can be recycled Appliance unplug the appliance and cut the po
27. s then restarted and completed ADJUSTMENTS rm AROMA OPTI DOSE ADJUSTS THE COFFEE DOSE PER CUP It is possible to choose three aroma options strong medium and mild by pressing the 9 9 O button These indicate the quantity of coffee the machine grinds for each beverage This button is also used to select the pre ground coffee function SELECT THE AMOUNT OF COFFEE TO BE GROUND BEFORE DISPENSING THE BEVERAGE COFFEE STRENGTH The SBS dial has been carefully designed to give your coffee the fullness and intensity you desire Simply turn the dial and you will notice that the coffee brewed will adjust to the setting selected SBS SAECO BREWING SYSTEM MEDIUM LU SBS adjusts the fullness of the brewed coffee COFFEE 73 The coffee may even be adjusted while i brewing This adjustment has an immediate 07 Nw le NS STRONG f COFFEE effect on the selected type of brewing 0 ADJUSTMENTS DRIP TRAY HEIGHT ADJUSTMENT Adjust the drip tray to the appropriate cup size before selecting the beverage To raise the drip tray press lightly on the lower part of the button To lower the drip tray press lightly on the upper part of the button When the desired height is reached release the button SAECO ADAPTING SYSTEM Coffee is a natural product and its characteristics may change according to its origin blend and roast The saeco coffee machine is equipped with a self adjusting system that allows the use
28. sion cord is used l The marker electrical rating of the detachable power supply cord or extension cord should be at least as great as the electrical rating of the appliance 2 It the appliance is of the grounded type the extension cord should be grounding type 3 wire cord and 3 The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over 2 CONTENTS GENERAL INFORMATION 3 TECANICAL DATA 3 4 4 INSTALLATION ccccccccccccccsecccccccccccccesuccecececsessuuecececeesauecceseceecensuecececeecuauececececetaneseceesecnuinaneeeeeentntnes 5 5 SETTING 6 SETTING THE WATER HARDNE O Ee 6 WTE A TER FE a a E E 7 8 08 5271 8 PAIS IE 9 AROMA OPTI DOSE ADJUSTS THE COFFEE DOSE PER CUP csssssssssssscsecsssessesaesacsesscsecsesaesessessesassessesaesassesaesaseesaeassasaess 9 COFFEE STRENGTH cccccccesssccsseccecenscecesceecenaeecusaceecenaeceesaceeeauaesesuaaeesecaeeeseecacauaeseseaeseesenaeeseneseccanseeseasesessussensnteens 9 DRIP TRAY HEIGHT ADJUSTMENT lt ccxssscecssdsussitecnnssccecdscsaseceunsaestesnaiasdubsaggnc aansasdedevadusssuceanadcadnsusascentanddcbeadevaataceeasstene 10
29. tem Insert the filter in the empty tank the tank and store it in a dry place Soft water The reference mark and the sheltered from dust B Medium water standard groove must match Push firmly C Hard water until it is completely inserted Fill the tank with fresh drinking Place a container beneath the hot Press MENU water and re insert it into the water steam wand Select maintenance and press the machine WP button Select water filter and press Select activate filter and press the Turn the ue to the ll position WU again W button Water dispensing begins When the machine has finished turn the knob until it is in the rest position e Press MENU a few times until the exit message is displayed Then press The machine is now ready for use NOTE if the Intenza water filter is not used insert the small white filter previously removed see step 1 into the tank CONTROL PANEL Access the programming menu __ Steam button Click wheel Brew button Selects the aroma 2 amount of coffee ground Hot water button per cup or selects pre ground coffee Press the i button twice to make 2 cups This operation can be performed up until the grinding of the first cup is complete Press twice gp To brew 2 cups the machine dispenses the first coffee and briefly interrupts dispensing in order to grind the second serving of coffee Coffee dispensing i
30. to off then remove plug from wall outlet 12 Do not use appliance for other than intended use 13 Save these instructions SAVE THESE INSTRUCTIONS CAUTION This appliance is for household use only Any servicing other than cleaning and user maintenance should be pertormed by an authorized service center Do not immerse machine in water To reduce the risk of fire or electric shock do not disassemble the machine There are no parts inside the machine serviceable by the user Repair should be done by authorized service personnel only Check voltage to be sure that the voltage indicated on the nameplate corresponds with your voltage Never use warm or hot water to fill the water tank Use cold water only Keep your hands and the cord away from hot parts of the appliance during operation Never clean with scrubbing powders or harsh cleaners Simply use a soft cloth dampened with water For optimal taste of your coffee use purified or bottled water Periodic descaling is still recommended every 2 3 months Do not use flavored or caramelized coffee INSTRUCTIONS FOR THE POWER SUPPLY CORD short power supply cord or detachable power supply cord is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord Longer detachable power supply cords or extension cords are available and may used if care is exercised in their use long detachable power supply cord or exten
31. up allows you to fully savor the coffee and taste its full aroma Sct the current time date and format you wish to display Set the current time on the machine Set the time format The machine can also display the time in the American format am pm Set the current date day month year day of the week Set the date format The machine can also display the date in American format MM DD YY Y Y 2 PROGRAMMING THE MACHINE MAINTENANCE To access the machine maintenance settings press the MENU button scroll to maintenance and press the Qj button Navigate the click wheel with your finger Access the water filter menu Display how many liters of water can still be used SS before changing the water filter m ra Set the water filter status This function must be Sa activated when the filter is installed Activate the water filter to be performed when you ll install a new filter Note Before starting place a container beneath the hot water steam wand see page 7 Access the descaling menu Display how many liters of water can still be used 3 before the machine requires a descaling cycle Perform an automatic descaling cycle see page 24 Clean the machine s internal circuits used for brewing coffee meer Perform an automatic wash cycle of the brew group see page 26 ENERGY SAVING STAND BY To adjust the energy saving parameters of the machine press t
32. w group and dry using the supplied lubricant Apply the lubricant evenly on both Make sure the brew group is in Make sure the components are in side guides rest position the two references the correct position The hook must match shown must be in the correct position to check its position firmly press the PUSH button Ln The lever on the rear part of the Insert the washed and dried brew Insert the dregdrawer group must be in contact with group DO NOT PRESS THE Close the service door the group base PUSH BUTTON GUIDE MESSAGE THAT APPEARS ERROR CODES EI HOW TO REMOVE THE MESSAGE XX identifies an error code Turn off and after 30 seconds turn the machine again to restore normal operation If the problem persists call Saeco or an authorized service center and give the code xx shown on the display Close the coffee bean hopper lid to be able to make a beverage Put coffee beans into the bean hopper Insert the brew group in its place see page 28 Insert the dregdrawer This preliminary warning does not stop the machine from functioning Proceed until the next message appears Remove the dregdrawer and dispose of the used coffee grounds see page 27 steps 1 and 2 Note The dregdrawer must be emptied only when the machine requires it and when the machine is turned on If you empty the drawer with the machine turned off it will not reset the count of cycles In order for the machine
33. wer cord Deliver the appliance and power cord to a service center or public waste disposal facility This product complies with eu directive 2002 96 ec E The symbol on the product or on its packaging indicates that this product may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product FIRE SAFETY In case of fire use Carbon Dioxide extinguishers Do not use water or dry powder extinguishers DECLARATION OF CONFORMITY EC 2006 95 EC 2004 118 EC 1992 31 EC 1993 68 SAECO INTERNATIONAL GROUP 5 Via Torretta 240 40041 Gaggio Montano Bo Italy declare under our responsability that the product AUTOMATIC COFFEE MAKER SUP 032BR to which this declaration relates is in conformity with the following standards or other normative documents Safety of household and electrical appliances General requirements EN 60335 1 2002 A1 2004 A2 2006 A11 2004 A12 2006 Safety of househol
34. with INSTALLATION Choose solid stationary flat surface no more than 2 of inclination Do not install the machine in areas where water could be sprayed Optimal operational temperature 10 C 40 C 50 104 degrees Fahrenheit Maximum humidity 90 The machine should be installed in an adequately lit ventilated hygienic location and the electric socket should be within easy reach Do not place on heated surfaces Install it at least 10 cm 4 from the walls and cooking surfaces Do not use in places where the temperature may drop to a level equal to and or lower than 0 C 32 degrees Fahrenheit If the machine has been exposed to such conditions notify the customer service center who will have to carry out a safety check Do not use the machine near inflammable and or explosive substances The machine must not be used in an explosive or volatile atmosphere or where there is a high 32 SAFETY RULES concentration of dust or oily substances suspended in the air Do not install the machine on top of other appliances DANGERS The appliance must not be used by children and persons who have not been informed of its operation The appliance is dangerous to children When left unattended unplug from the electrical outlet Keep the coffee machine packaging out of the reach of children Never direct the jet of hot water and or steam towards yourself or others Danger of scalding Do not insert objects th
Download Pdf Manuals
Related Search