enzis installation instructions user manual important
Contents
1. BRUCK LIGHTING SYSTEMS For more assistance with technical questions please call our 15774 Gateway Circle Tustin CA 92780 technical support staff at 714 259 9959 You can also e www brucklighting com contact us by email at info brucklightingsystems com an 2 CANOPY FEED ART NO h f A f ili hick n n 140 307bz bronze The 2 canopy feed is designed for a ceiling thickness between 1 1 16 and 3 16 140 307mc matte chrome TECHNICAL DATA Description power feed with 2 J box for power delivery Design Wesley Dochnahl Dimensions length 3 1 2 Material brass matte chrome plated 1 THIS PRODUCT MUST BE INSTALLED BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED IN ACCORDANCE WITH LOCAL NEC CODE 2 FOR USE WITH ENZIS RAIL NETWORK ONLY 3 The Enzis rail system is not intended for use with a power supply cord or convenience receptacle adaptor This rail system is to be supplied by Bruck Lighting 4 Do not install the Enzis rail system in damp or wet locations 5 Do not install any part of a rail system less than 5 feet above the floor 6 Do not install any fixture assembly closer than 6 inches from any curtain or similar combustible material 7 Disconnect electrical power before adding to or changing the configuration of the rail 8 Do not attempt to energize anything other than lighting rail fixtures on the rail To reduce t2. e the installation CONTENTS OF DELIVERY Run the Enzis track through the power feed and secure by tighten thumb screws E canopy power feed with 2 J box mounting screws allen wrench and with phillips head screwdriver 3 is the recommended size to use crimps
3. he risk of fire and electric shock do not attempt to connect power tools extension cords appliances and the like to the rail 9 This track system MUST BE HARD WIRED For all the wire connections use Listed Wire Nuts 10 Do not connect a rail to more than one circuit unless the rail is constructed so that it can be used with more than on circuit Check with a qualified electrician Although the rail lighting system may seem to operate acceptably a dangerous overload of the neutral may occur and result in a risk of fire 11 Secondary connections must be clean and tight to avoid arcing and overheating 12 Power Feed must be 3 inches away from any support and 6 inches away from fixture 13 Warranty is void in case of unauthorized modifications and or improper use Drill a 2 1 4 hole in the mounting surface Slide the j box C into the mounting surface make sure the side brackets G are not extended outwards When possible place support ring H over J box Tighten the mounting screws F to extend the side brackets and hold the j box in place DO NOT overtighten the screws the side brackets may cut through the mounting surface Pull the 10 w voltage wires A through the back plate B Use wire nuts to connect the wires Attach the back plate B to the j box D with screws Place the magnetic cover plate D over the j box C to complet
Download Pdf Manuals
Related Search