Click for PDF of user manual
Contents
1. 2 EUN ind Do not connect battery until Bait Cover is staked to ground Do not short battery terminals against anything metallic e Charge battery before use Battery may come with half a charge Battery 12 VDC 5 Ah capacity e Charger 110 VAC input 12 VDC 0 5 A output Charger will be damaged if connected incorrectly Remove protective caps from battery Connect charger leads red to red and black to black Red light means battery is charging e Green light means battery is fully charged may take 10 hours e It is recommended to place protective caps back on battery terminal after charging STAKING BAIT COVER e Select a suitable Bait Cover location that is relatively flat and will not flood with water 190 MAX Incorrect Incorrect e The Bait Cover has a slip clutch on the rotating arm If placed on level ground the cover is intended to touch the ground in both the closed position and open position with the clutch slipping a small amount upon contact with the ground This ensures the cover contacts tightly with the ground when closed The main pivot screw on the slip clutch is factory torqued to 130 in Ibs to allow for a cover lifting force of 12 Ibs at the end of the cover i i d i Y Push stakes in through tube holes with the module upright TIMER PROGRAMING Timer button functions TIMER Lets you see set timer prog2. USER BAIT N COVER WHAT 15 2 OP EIR RO Meat 3 PSOE IMB e 4 BATTER 5 STAKING BAIT 6 TIMER 7 Do not hook up battery before fully reading and understanding this manual ABC UM2012A 2012 Westar WHAT IS INCLUDED Module Lid Main Module Battery 1X Stakes 2X 110 VAC IN 12 VDC Charger Bait Cover needs to be staked to the ground before any arm rotation is attempted Do not remove or reattach the module lid when arm is moving Bait Cover needs to be in the closed position when removing or reattaching the module lid OPERATION The automatic battery powered Bait Cover is staked beside your bait pile and will open and close at the times you set You control the movement of the rotating arm cover by pressing the MANUAL button on the timer to one of three modes shown below ON will rotate AUTO opens closes OFF will rotate cover open 1909 to your programed cover closed 1909 Timer settings Opened Position Closed Position ASSEMBLY Attach cover bracket to main module arm using 1 4 20 nuts included WARNING Automatic Bait Cover Am may move a ES Disconnect battery is ANS port Do not loosen or tighten main pivot screw It is factory torqued defo
3. If you do not want to use the beeper unplug and remove it e After test running is satisfactory cycle the MANUAL button to OFF close cover press MANUAL button to AUTO use timers Bait Cover should remain closed and the module lid can now be safely reattached Tips on using your Bait Cover e After placing your Bait Cover initially you may want to leave it open for a longer time during the day to better acclimate the deer feeding beside it Later you can trim the open time down to your desired times e Battery life varies with usage style and temperature approximate battery life is 30 days Bait Cover may freeze to the ground in colder temperatures with sleet or snowfall Check Bait Cover and break it free from the ground in these conditions The Bait Cover is engineered to hold to the ground when deer are present and lift up by overcoming the slip clutch when bear are present to minimize permanent unit damage in the case of exces sive side load the cover bracket is designed to bend at a certain area protecting other parts from damage The cover bracket may be easily bent back to its original shape Problem Bait Cover does not rotate open or close when pressing MANUAL button to ON and OFF In AUTO mode Bait Cover does not open and close using timers or activates at the wrong time No display on timer Bait Cover motor runs but arm doesn t rotate When checking Bait Cover it is partiall
4. G OR USAGE OF TRADE THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF Westar shall not be liable for nor does Westar authorize any person to assume for Westar any other liability in connection with the equipment or services furnished by Westar including without limiting the generality of the foregoing liability for loss of product or liability for direct incidental indirect special or consequential damages or any damages to persons or property Westar will make no allowances for repairs alteration or other work done unless specifically agreed to in writing Purchaser agrees that purchaser s sole remedy for liability of any kind including negligence with respect to the equipment and services fur nished by Westar shall be limited to the remedies provided herein DISCLAIMER Although instruction and recommendations are included for installation and opera tion of your Bait Cover Westar Mfg does not assume responsibility for the instal lation or use of this equipment nor shall we be held liable for the direct or conse quential damages resulting from the improper methods or procedures MESTAR 55 SBAIT m um P O Box 79 ar Dorchester Wl 54425 COVER me Phone 715 654 5000 www baitcover com Westar Mfg reserves the right to change or discontinue products without notice
5. r s obligation under this warranty is limited to repairing at Westar s factory or furnishing a replacement for any part or correcting any workmanship which shall be demonstrated to Westar s satisfaction to have been defective at the time of delivery and with respect to which a written claim specifying the particular defect or defects shall have been delivered to Westar within 6 months from the date of purchase of the Bait Cover to the original pur chaser Defective parts shall be returned to Westar F O B Westar s factory and repaired or replacement parts shall be shipped by Westar F O B Westar s Factory The removal by purchaser of parts re turned to Westar for repair or replacement and the installation by the purchaser of replacement or repaired parts shall be at purchaser s expense Repairs replacements or adjustments for which Westar is responsible will be made as promptly as possible within the standard working hours of any day Overtime if required by purchaser will be paid for by purchaser Westar does not warrant equipment manufactured by others but will submit the manufacturer s war ranty to purchaser upon request EXCEPT AS EXPRESSLY STATED HEREIN THERE ARE NO WARRANTIES EXPRESS OR IMPLIED BY OPERATION OF LAW OR OTHERWISE OF THE EQUIPMENT OR SERVICES FUR NISHED BY WESTAR WESTAR SPECIFICALLY DISCLAIMS AND EXCLUDES ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ARISING FROM A COURSE OF DEALIN
6. rams MANUAL To select ON AUTO OFF ON Opens Bait Cover AUTO Timer follows set ON OFF programs to open close OFF Closes Bait Cover CLOCK To adjust current day and time DAY To adjust day of week HOUR To adjust hour MIN To adjust minute Resets timer s settings erasing ON OFF programs Timer is in 24 hour format example 7 30 pm is 19 30 Adjusting CLOCK Press and hold CLOCK and then press HOUR MIN DAY respectively to adjust the clock to current hour minute and day Programming the TIMERS 1 Press TIMER until 19 open shows on the display 2 Press HOUR MIN to set desired time for 19 open After finishing 19 open press TIMER to get to 191 close 4 Repeat steps 2 3 to set additional timers under 2 18 ff if more timers are desired 5 After setting programs press CLOCK to return to active functions setting the day schedule The timer defaults to running on the 1 day schedule which is every day of the week TU WE If you would like to set ALL of your timers to run on a different day schedule the chart on the right depicts all availible day schedules Press TIMER then press DAY to select one of we m FR sa the 15 day schedules Day schedule should be the same for your ON and OFF timers eee 14 MO WE FR 15 TU TH SA START UP e beeper is included with the Bait Cover When plugged in to the board it will beep when the Bait Cover is opening
7. rm 611520 5 3 8 24 x 75 SHCS torque to 130 in Ibs MMC 901282362 6 Spring washer Lee Spring 375 080 1000 7 Clutch washer 611518 8 Clutch friction disc 0 03 in thick 611519 9 Main enclosure box 611414 10 3 8 ID x 25 bronze flange bushing MMC 293816 11 Board with wiring harness assembly 611406 12 Timer 611405 13 Output shaft bushing 611526 14 Final drive gear and shaft assembly 611527 15 Final drive spacer 611516 16 Final drive dog leg spacer 611524 17 Back plate assembly with bushing and limit switches 611611 18 Gear motor with gear 611408 19 National 12 VDC 5Ahr battery NP5 12 20 Battery charger 12V0 5Ah ELECTRICAL SCHEMATIC ALV1d OVE 1 39 wu N C 5 778 835019 10 N3dO St Q33 3 2 und 2 o LHM LHM 134338 3 8 B 8 rg O OCA We 2 Sg Zl _ 11 8 gtl M 13A 21 94N MVIS3M Bin 0 2 28V C c 5 Q33 N39 pt IUE HOLIMS LINII WOLLOS HJNIL 11 LIMITED WARRANTY Westar Mfg Corp warrants to the original purchaser of the Bait Cover that is not manufactured by others to be free from defects in material and workmanship under normal use and service and when properly maintained by the purchaser Westa
8. y off the ground in the closed position Cause Battery dead Battery wired disconnected Board motor wires disconnected Damaged motor Damaged board Damaged timer May not be set to AUTO No ON open or OFF close timers set Clock set incorrectly Lithium battery inside timer dead Damaged timer Cover frozen to ground Slip clutch pivot screw loose Worn friction discs on slip clutch Damaged gear train Bait Cover staked to ground that s not level An animal lifted the cover TROUBLESHOOTING Solution Charge battery Reconnect battery terminals Check and reconnect Check and replace Replace replace Press MANUAL button to set into AUTO mode Set timers Set clock note its is in 24 hour format Replace battery note battery good for approximately 3 years Replace timer Free cover from ground Tighten screw to 130 in Ibs using Loctite thread locker Do not tighten past 200 in Ibs Replace Replace gear motor or fi nal drive gear Reposition Bait Cover to a better location Set an additional timer to open then close the cover 1 minute later this will re set the cover to the ground ASSEMBLY 10 No Description Part 1 Stakes 611521 2 Enclosure lid 611415 3 Cover and bracket assembly 611628 4 owing a
Download Pdf Manuals
Related Search