CZ202A CZ202AR
Contents
1. eos CZ202A Chrion 12V GROUND 15A max AM 531 1629kHz FM 87 5 108MHz nno owned by Meroen Corporatan ar 051 722 877 been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod or iPhone may affect wireless performance iPhone and iPod are trademarks of Apple Inc registered in the U S and other countries Front Panel Generalities For a longer service life be sure to read the following cautions Do not allow any liquids on the unit from drinks umbrellas etc Doing so may damage the internal circuitry Do not disassemble or modify the unit in any way Doing so may result in damage Do not let cigarettes burn the display Doing so may damage or deform the body If a problem should occur have the unit inspected at your store of purchase The remote control unit may not work if the remote control sensor is exposed to direct sunlight Cleaning the body Use a soft dry cloth and gently wipe off any dirt or dust Fortough dirt apply some neutral detergent diluted in water to a soft cloth wipe off the dirt gently then wipe again with a dry cloth Do not use benzene thinner car cleaner etc as these substances may damage the body or cause the paint to peel Also leaving rubb2. 2 Files without MP3 WMA data will not play To select LOCAL function press and hold the DISP button on the front panel then press 91 button repeatedly until LO or DX displays on the screen rotate the TVOLUME knob to select Local or Distant mode Note The number of radio stations that can be received will decrease after the local seeking mode is ON The files will be played soundlessly if you attempt to play files without MP3 WMA data When VBR files are played the play time display may differ the play location When MP3 WMA files are played a little no sound part is caused between tunes Logical format File system 1 When writing MP3 WMA file on a CD R disc or CD RW disc please select ISO9660 level 1 2 or Joliet or Apple ISO as the writing software format Normal play may not be possible if the disc is recorded on another format 2 The folder name and file name can be displayed as the title during MPS WMA play but the title must be within 32 single byte alphabetical letters and numerals including an extension 3 Do not affix a name to a file inside a folder having the same name Folder structure A disc with a folder having more than 8 hierarchical levels will be impossible Number of files or folders 1 Up to 999 files can be recognized per folder Up to 3000 files can be played 2 Tracks are played in the order that they CD MP3 WMA Operations were recorded onto a disc Tracks
3. 320mV at 1V output Mid 650mv at 1V output Low 1 3V at 1V output input impedance 10 kQ or greater Aux in level lt 2V TIONS General Power supply voltage 14 4VDC 10 8 to 15 6V allowable negative ground Pre Amp output voltage 2 0V CD play mode 1kHz 0dB 10kQ load Fuse 15A Dimensions of the Main Unit 188mm Width x 58mm Height x 190mm Depth Weight of the Main Unit 1 30kg 178mm 50mm E E E ge 170mm Imm N 188mm 7 58mm_ Notes Specifications and design are subject to change without notice for further improvement 9 INSTALLATION WIRE CONNECTION GUIDE CONTENTS 1 Before Starting e scence u u u u 2 Package Contents i 3 General Cautions 4 Cautions on Installation 5 Installing the Source Unit 6 Removing the Source Unit 7 Wiring and Connections 8 Connecting the Accessories 1 Before Starting 1 This set is exclusively for use in cars with a negative ground 12 V power supply 2 Read these instructions carefully 3 Be sure to disconnect the battery terminal before starting This is to prevent short circuits during installation Figure 1 Car battery Figure 1 2 Package Contents Source unit ees Ec 2 Front panel Wire connector EN Trim ring Owner s manual Mounting bracket Screw M4x5 mm Screws M5x6 mm Roonaan 3
4. General Cautions 4 Cautions on Installation 1 Prepare all articles necessary for installing the source unit before your car dealer beforehand 4 Use the enclosed screws for starting installation 2 Install the unit within 30 of the Using other screws can cause horizontal plane Figure 2 damage 3 If you have to do any work on the car Figure 3 body such as drilling holes consult Chassis Chassis i di dox Damage I 1 1 l 1 Max 30 n Max 6 mm M5 screw ra SMS ORT UNIO Sie Figure 2 Figure 3 5 Installing the Source Unit 1 Place the mounting bracket into the instrument panel use a screwdriver to bend each stopper of the mounting bracket inward then secure the stopper 2 Wire as shown in Section 7 3 Insert the source unit into the mounting bracket until it locks 4 Take care of the top and bottom of the trim ring and mount it so that all the hooks are locked Notes 1 Some car models require special mounting kits for proper installation Consult your Clarion dealer for details 2 Fasten the front stopper securely to prevent the source unit from coming loose Console opening dimensions 1 Do not open the case There are no user serviceable parts inside If you drop anything into the unit during installation consult your dealer or an authorized Clarion service center 2 Use a soft dry cloth to clean the case Never use a rough cloth thinner b
5. press and rotate the VOLUME knob to select a desired option then press the VOLUME knob to confirm NOTE VIDEO MENU item is different by the model of connected iPod and language setting Repeat play This function allows you to play the current C 1 CCA 755 7 to monitor CCA 748 track repeatedly or play all tracks in your iPod iPhone repeatedly 1 Press the 2 button once or more until RPT ON appears on the LCD to perform repeat play 2 Press 2 button repeatedly until RPT OFF appears on the LCD to cancel repeat playback Random play This function allows you to play all tracks recorded on a disc in a random order 1 Press 3 button repeatedly until ALBUM RDM appears on the LCD for album random play iPod amp iPhone Operations 2 Press the 3 button once or more until SONG RDM appears on the LCD to perform random play Press 3 button repeatedly until RDM OFF appears on the LCD to cancel random playback Setting iPod simple control mode Use this function if you wish to operate through your iPod connected to this unit via the USB cable RD The factory default setting is OFF Press and hold DISP button to enter system setup 2 Press 1 or p1 button to select S CTRL 3 Rotate the VOLUME knob to select ON or OFF ON Operations are made through your iPod OFF Operations cannot be
6. may not always be played in the order displayed on the PC 3 Some noise may occur depending on the type of encoder software used while recording Eject function Just pressing the 4 button ejects the disc Notes f you force a CD into before auto reloading this can damage the CD e If a CD 12 cm is left ejected for 15 seconds the CD is automatically reloaded Auto reload Listening to a disc already loaded in the unit Press the SRC 5 button to select the CD MP3 WMA mode When the unit enters the CD MP3 WMA mode play starts automatically Loading a CD Insert a CD into the center of the CD SLOT with label facing up The CD plays automatically after loading Notes Never insert foreign objects into the CD SLOT f the CD is not inserted easily there may be another CD in the mechanism or the unit may require service Discs without the ij ROMs cannot be played by this unit Some CD R CD RW discs may not be usable Pausing play 1 Press the 4 button to pause play PAUSE appears in the display 2 To resume CD play press the 4 button again Displaying CD titles This unit can display title data for MP3 WMA disc When SCROLL is OFF each time you press the DISP button to change the title display MP3 WMA disc Track gt Folder gt File title gt Album gt Title gt Artist gt Track Notes If MP3 WMA disc has no ID3 TAG NO TITLE a
7. Clarion Owner s manual amp Installation manual Pedoman Pemilik amp Pemasangan APS Qa QR 3994 5 FR BB 8 SEEM Ana lanunarqhanisAnagy CZ202A CZ202A R CD MP3 WMA RECEIVER PENERIMA CD MP3 WMA CD MP3 WMA 44 gt CD MP3 WMA B IlI L ua Sax usan d5 MP3 WMA 2 Contents Thank you for purchasing this Clarion product Please fully read this owner s manual before operating this equipment 1 FEATURES Expanding Systems 2 PRECAUTIONS Front Panel Generalities Remove the DCP Attach the DCP 3 CONTROLS Operational Panel Names of Buttons Remote Control RCX001 Sold by separately Notes of remote control using 4 CAUTIONS ON HANDLING Handling Discs 5 OPERATIONS Basic Operations System Setup Audio Setup Radio Operations CD MP3 WMA Operations USB Operations iPod amp iPhone Operations AUX Operations TROUBLE SHOOTING ERROR DISPLAYS SPECIFICATIONS INSTALLATION WIRE CONNECTION GUIDE l u u oo CZ202A4 CZ2024R O O c I O O O Q GQ Q Q gt gt gt gt G G G G O sN 1 FEATUR W Compatible with iPod iPhone via USB W Front Panel Auxiliary Input and 2ch RCA Output with Subwoofer Control W BEAT EQ with 3 Band Parametric Equalizer and MAGNA BASS EX Dynamic Bass Enhancement COMPACT DIGITAL AUDIO use Expa
8. LUME knob to select a folder 3 Press the VOLUME button to enter the file list search mode And then the track list appears in the display 4 Turn the VOLUME knob to select a track Press the VOLUME knob to play When play back MP3 WMA file this function is performed in the current folder o Top function The top function resets the CD player to the first track of the disc Press and hold the 4 button 1 sec to play the first track track No 1 on the disc n case of MP3 WMA the first track of the current folder will be played Other various play functions Scan play This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc Press the 1 button to perform scan play CZ202A CZ2024R Repeat play This function allows you to play the current track repeatedly or play a track currently being played in the MP3 WMA folder repeatedly CD 1 Press the 2 button once or more until RPT ON appears on the LCD to perform repeat play 2 Press 2 button repeatedly until RPT OFF appears on the LCD to cancel repeat playback MP3 WMA 1 Press the 2 button once or more until TRACK RPT appears on the display to perform repeat play and RPT segment ights on 2 For MP3 WMA files press 2 button repeatedly until FOLDER RPT appears on the display for folder repeat play 3 Press 2 button repeatedly
9. ant at RADIO mode LO Only stations with strong signal can be received DX Stations with strong and weak signals can be received AUX SENS AUX mode Rotate the VOLUME knob to choose AUX Input sensitivity LOW MID or HIGH at AUX mode SCRN SVR ON OFF Rotate the VOLUME knob to choose SCRN SVR screen saver ON or OFF SCROLL ON OFF For track information that is longer than the display panel When SCOLL is ON the LCD will scroll the ID3 TAG information across the display e g TRACK gt FOLDER gt FILE gt ALBUM gt TITLE gt ARTIST gt TRACK gt When SCROLL is OFF the LCD will display one of the ID3 TAG information the default is TRACK but user can adjust it to other ID3 TAG information by press DISP button Audio Setup Press the P button to enter sound effect setting mode First press shows current EQ Rotate the VOLUME knob to changes BEAT EQ in this order CZ202A4 CZ2024R S CTRL IPOD mode ON OFF Rotate the VOLUME knob to choose S CTRL Simple control ON or OFF Refer to P9 DIMMER ON OFF Rotate the VOLUME knob to choose DIMMER ON or OFF ON LCD dimmer is active when small light of vehicle is turned ON OFF LCD always maximum brightness regardless of the vehicle small light REAR S W Rotate the VOLUME knob to choose REAR or S WOOFER SUB WOOFER TEL SW Rotate the TVOLUME knob to choose MUTE ON or OFF MUTE The sound from this unit is muted
10. ction CD mode No function RADIO mode No function AUX mode No function USB mode Search function iPod mode iPod menu 4 Button Press to eject disc r4 1 Buttons Previous next track Search Long press Open Button Unlock the front panel PS AS Button Scan play Preset scan Auto memory store long press CZ202A4 CZ2024R Disc Slot 2 USB Connector gt VOLUME SN aet PDM pul eTOP Y FOLDER a 1 s 4 g 1 6 ISR AUX Jack gt Button Sound effect setting VOLUME Knob Adjust volume level Confirm press ISR Button Recall ISR station stored in memory and store current station in ISR memory long press 1 6 Buttons 1 Button Scan play Preset station 1 2 Button Repeat play Preset station 2 3 Button Random play Preset station 3 4 Button Play Pause Top play long press Preset station 4 5 Button Previous folder Preset station 5 10 tracks down long press 6 Button Next folder Preset station 6 10 tracks up long press DISP Button Display switch System setup long press Remote Control RCX001 Sold by separately SRC 5 Button Toggle the audio source Power on Power off long press 4 gt gt Buttons Preset station up down Previous next track Search long press SCN PS AS Button Scan play Preset scan Auto memory store long pr
11. d Battery Another disc is already loaded Check wiring and correct Measure Eject the disc before loading the new lone There is an object install inside the unit Remove the object inside the unit Compact disc is dirty Clean the compact disc with a soft cloth lor warped Compact disc is heavily scratched Replace with a compact disc with no scratches Condensation may form on the when power is first linternal lens when the car is urned on parked in a humid place Let dry for about 1 hour with power on CZ202A CZ202AR 9 USB Devices Problem USB device cannot be inserted The USB device has been inserted with wrong direction Measure Reversing the connection direction of the USB device try it again The USB connector is broken Replace with a new USB device USB device is not recognized INo sound heard with ithe display No File shown The USB device is damaged Connectors are loose No MP3 WMA file is stored in the USB device Disconnect the USB device and reconnect If the device is still not recognized try replacing with a different USB device Store these files properly in the USB device Sound skips or is noisy MP3 WMA files are not encoded properly 7 ERROR DISPLA Use MP3 WMA files encoded properly If an error occurs one of the following displays is displayed Take the measures d
12. during telephone calls OFF This unit continues normal operation even when the cellular phone is used ON You can listen to your telephone calls from the speakers connected to this unit When listening to your calls on your car speakers you can adjust the volume by turning the VOLUME knob BEEP ON OFF Rotate the VOLUME knob to choose button beep sound ON or OFF 12 24H Rotate the VOLUME knob to choose time format 12 or 24 hours OFF B BOOST gt IMPACT EXCITE gt CUSTOM Rotate the VOLUME knob to changes CUSTOM and press the VOLUME knob Audio Setup the press 1 or amp 1 button to select it including BAS G BAS F gt BAS Q gt MID G gt MID F gt MID Q gt TRE G gt TRE F rotate the VOLUME knob to select a value BAS G MID G TRE G 7 7 BAS F 60 80 100 200 BAS Q 1 0 1 25 1 5 2 0 MID F 500 1K 1 5K 2 5K MID Q 0 5 0 75 1 00 1 25 TRE F 10 0K 12 5K 15 0K 17 5K Radio Operations Select tuner as playing source Press SRC b button once or more to enter RADIO mode Selecting the radio band Press the BAND button to select one radio band among FM1 FM2 FM3 and AM Manual tuning During manual tuning the frequency will be changed in steps Press the 1 or gt button on the panel to tune in a higher lower station Press the 1 or gt button on the remote control to se
13. ed side up 3 Press battery into compartment as shown 4 Replace and slide cover until it clicks into place Insertion guide 4 CAUTIONS ON HANDLIN Handling Discs Handling New discs may have some roughness around the edges If such discs are used the player may not work or the sound may skip Use a ball point pen or the like to remove any roughness from the edge of the disc Ball point pen Roughness Never stick labels on the surface of the disc or mark the surface with a pencil or pen Never play a disc with any cellophane tape or other glue on it or with peeling off marks If you try to play such a disc you may not be able to get it back out of the player or it may damage the player Do not use discs that have large scratches are misshapen cracked etc Use of such discs may cause misoperation or damage To remove a disc from its storage case press down on the center of the case and lift the disc out holding it carefully by the edges Do not use commercially available disc protection sheets or discs equipped with stabilizers etc These may damage the disc or cause breakdown of the internal mechanism Storage Do not expose discs to direct sunlight or any heat source Do not expose discs to excess humidity or dust Do not expose discs to direct heat from heaters Cleaning Toremove fingermarks and dust use a soft cloth and wipe in a straight line from the cente
14. enzine or alcohol etc For tough dirt apply a little cold or warm water to a soft cloth and wipe off the dirt gently 182 mm Hole 53 mm CZ2B02A CZ2024R 11 Method B Notes of installation 1 Before installation please make sure positive pole first and then the negative pole 7 DO NOT block the cooling fan exit to 6 Removing the Source Unit proper connections are conducted and the unit operates normally Improper connection may result in damage to the unit 2 Use only accessories designed and manufactured for this unit and other unauthorized accessories may result in damage to the unit 3 Before installation please fasten all power cables 4 DO NOT install the unit in the place where close to hot area to prevent damage to electrical components such as the laser head 5 Install the unit horizontally Installing the unit more than 30 degree vertically may result in worse performance 6 To prevent electric spark connect the See 12 cze024 CcZ2024R ensure sufficient heating dissipation of this unit or it may result in damage to this unit Unit Installation Method A 1 Insert mounting bracket into dash board choose appropriate mounting tab according to the gap width bending the mounting tab outwards with a screwdriver to fix the mounting bracket in place Slide the unit into the bracket until you hear a click sound Instrument panel Dashboard Moun
15. er or plastic products in contact with the body for long periods of time may cause stains Remove the DCP The control panel can be detached to prevent theft When detaching the control panel keep it in the safety place and prevent scratches We recommend taking the DCP DETACHABLE CONTROL PANEL with you when leaving the car Als 2 3 Press the SRC o button 1 sec to turn off the power Deeply push in OPEN button to unlock the DCP Hold the side popped out remove the DCP Attach the DCP 1 Hold the DCP and ensure that the panel faces towards you Set the right side of the DCP into the DCP bracket Press the left side of the DCP until it locks A CAUTION The DCP can easily be damaged by shocks After removing it be carefully not to drop it or subject it to strong shocks Once the OPEN button is pressed and DCP is unlocked car vibrations can cause the DCP to fall The connector for the main unit and DCP is extremely important Be careful not to damage it by pressing on it with fingernails screwdrivers etc Note If the DCP is dirty wipe off the dirt with a soft dry cloth only CZ202A CZ2024R 3 3 CONTROLS Operational Panel BAND MENU SRC OPEN n Names of Buttons SRC 5 Button Power Toggle the audio source BAND Button RADIO mode Select tuner band MENU Button MP3 WMA mode Search fun
16. escribed below to solve the problem Display Disc is inserted incorrectly Measure Eject the disc then reload it properly The disc format is not supported Try another disc This is a failure of deck s mechanism Consult your store of purchase If an error display other than the ones described above appears press the RESET button If the problem persists turn off the power and consult your store of purchase When the RESET button is pressed preset radio stations titles etc stored in memory are cleared 10 cze2024 cz202AR 8 SPECIFIC FM Tuner Frequency range 87 5 108 0MHz Usable sensitivity 8dBf Frequency response 30Hz 15kHz Stereo separation 30dB 1kHz Signal noise ratio gt 55dB AM Tuner Frequency range 531 1629kHz Usable sensitivity S N 20dB 30dBu CD Player System Disc digital audio system Frequency response 20Hz 20kHz Signal noise ratio gt 94dB Total harmonic distortion Less than 0 1 1kHz Channel separation gt 60dB MP3 WMA mode MP3 sampling rate 8 kHz to 48 kHz MP3 bit rate 8 kbps to 320 kbps VBR WMA bit rate 8 kbps to 320 kbps Logical format ISO9660 level 1 2 Joliet file system USB Specification USB 1 0 2 0 Playable audio format MP3 mp3 MPEG 1 2 Audio Layer 3 WMA wma Ver 7 8 9 1 9 2 Audio Amplifier Maximum power output 180W 45W x 4 Speaker impedance 4Q 4 to 8 Q allowable Input Audio input sensitivity High
17. ess BAND TOP Button Select tuner band RADIO mode Top play long press La v Buttons Volume up down Pli Button Play Pause ISR Button Recall ISR station stored in memory and store current station in ISR memory long press DISP Button Notes of remote control using 1 2 Display switch Aim the remote control at the remote sensor on the unit Remove the battery from the remote control or insert a battery insulator if the battery has not been used for a month or longer DO NOT store the remote control under direct sunlight or in high temperature environment or it may not function properly Use button shaped lithium battery CR2025 3V only DO NOT subject battery to recharge disassemble heat or dispose in fire or water Insert the battery in proper direction according to the and polarities Store the battery in a place where children ISRC RDM Button Random play RPT Button Repeat play MUTE Button Mute the volume BAND TOP a v en ISR wore EO C3 C9 men MUTE ISR DISP sen n RDM PS AS SCN RPT _ RDM PSIAS RPT Clarion cannot reach to avoid the risk of accident Inserting the Battery 1 Slide remote control unit s rear cover in the direction shown 2 Insert battery CR2025 into insertion guides with print
18. he VOLUME knob to select AUX SENS 3 If the output level of connected external audio player is HIGH rotate VOLUME knob and choose LOW And if the output level is LOW choose HIGH Unit fuse blown Replace with new fuse of correct rating Car battery fuse blown Replace with new fuse of correct rating The microprocessor has malfunctioned due to noise etc Turn off the power and remove the DCP Press the RESET button with a thin rod Note When the RESET button is pressed turn off the ACC power When the RESET button is pressed preset radio stations titles etc stored in memory are cleared Battery depleted Change the battery Battery installed incorrectly Install the battery correctly Improper audio output connection Volume set too low Check wiring and correct Increase volume level Speakers damaged Replace speakers Heavily biased volume balance Adjust the channel balance to center position Speaker wiring is in contact with metal part of car Insulate all speaker wiring connections or distortion Non standard disc used Use a standard disc Speaker power rating does not match unit Replace speakers Wrong connections Check wiring and correct Speaker is shorted Check wiring and correct MUTE wire is grounded Check the MUTE wiring and correct Incorrect connection between ACC an
19. lect preset stations Auto tuning Press and hold the lt lt lt or gt button to seek a higher lower station To stop searching repeat the operation above or press other buttons having radio functions Note When a station is received searching stops and the station is played Preset scan Preset scan receives the stations stored in preset memory in order This function is useful when searching for a desired station in memory Press the P button then press r or mp1 button to select USER preset including BALANCE gt FADER gt M B EX LPF low pass filter gt S W VOL Subwoofer Volume rotate the VOLUME knob to select a value BALANCE LEFT 1 7 gt CENTER gt RIGHT 1 7 FADER FRONT 1 7 gt CENTER gt REAR 1 7 M BEX ON OFF LPF THROUGH 80 120 160 SUBW VOL 6 6 1 Press the PS AS button 2 When a desired station is tuned in press the PS AS button again to continue receiving that station Note Be careful not to press and hold the PS AS button for 1 second or longer otherwise the auto store function will begin and the unit starts storing stations Auto store Only stations with sufficient signal strength will be detected and stored in the memory Press and hold the PS AS button 1 sec to start automatic station search To stop auto store press other buttons having radio functions Notes 1 After auto store the previous stored stations will be o
20. made through your iPod Notes When performing iPod operations using simple control mode make the operations slowly If repetitive operations are performed too quickly Unforeseen errors may occur When performing iPod operations using simple control mode please do not operate the iPod and the unit at the same time otherwise there may be unexpected event happened AUX Operations Press SRC o button on the panel or remote control to select AUX AUX is just for audio content with 3 5mm Jack connector plugged into audio in socket on the front panel AUX Input sensitivity setting 1 Press and hold the DISP button 1 sec Some iPod models do not support this function Consult your nearest Clarion dealer or website to confirm which models do not support this function iPod menu alphabet search This function searches the subfolders for desired alphabetical letters 1 Press the MENU button to select the iPod menu mode 2 Press the VOLUME knob to switch between categories MUSIC PLAYLIST ARTISTS ALBUMS GENRES SONGS COMPOSERS VIDEO MOVIES MUSIC VIDEOS TV SHOWS VIDEO PODCASTS RENTALS 3 Press the VOLUME knob The contents of the category are displayed 4 Press and hold the DISP button 1 sec 5 Rotate the VOLUME knob to select the desired letter to search 6 Press the DISP button again to next perform search 7 Press the VOLUME knob to confirm 2 Turn t
21. mute the volume from the unit Note Doing the operation above again or adjusting volume will release muting Volume adjustment Turn the VOLUME knob on the front panel or press the A or w button on the remote control The adjustable range of volume is 0 to 40 A CAUTION While driving keep the volume level at which external sounds can still be heard Playing source selection Press SRC b button on the front panel or remote control repeatedly to choose desired playing source Notes Playing source selection means selecting which mode such as DISC mode RADIO mode and AUX mode Display system time Press the DISP button on the front panel or DISP button on the remote control to switch the display information system time and playing source RESET Note When the RESET button is pressed preset radio stations titles etc stored in memory are cleared e E Bo T H RESET CZ202A CZ2024R 5 System Setup In any mode press and hold DISP button to enter system setup Press r or p button to select options rotate the VOLUME knob to adjust CLOCK Press the VOLUME knob to enter clock setting mode rotate the VOLUME knob to set clock press re or mp1 button to select hour or minute press and hold the VOLUME knob to confirm DX LO RADIO mode Rotate the VOLUME knob to choose radio local or dist
22. nding Systems Expanding audio features 2 Channel Amplifier lt USB Memory Connect via CCA 755 iPod iPhone Connect via CCA 748 Portable Player Note Connect by AUX IN Jack e The items listed outside of the frames are the commercial products generally sold CCA 748 and CCA 755 Sold by separately A WARNING For your safety the driver should not operate the controls while driving Also while driving keep the volume to a level at which external sounds can be heard 1 When the interior of the car is extremely cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible If moisture forms on the disc wipe it off with a soft cloth If moisture forms on the optical parts of the player do not use the player for about one hour The condensation will disappear naturally allowing normal operation Driving on extremely bumpy or rough roads can cause the disc to skip during playback This unit uses precision parts and components for its operation In the event that trouble arises never open the case disassemble the unit or lubricate the rotating parts Contact your Clarion dealer or service center Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has
23. nt Right TOER Brown wire Phone mute lead White Connect to cellular phone mute lead White Black Purple Front Left Yellow wire Memory back up lead Connect directly to battery Rear Right Purple Black Green Red wire Power lead Rear Left Accessory 12V Green Black sr 4 Speaker system t or Blue White wire Amplifier turn on lead Connect to remote turn on lead of amplifier 2 Speaker system Black wire Ground lead Gray Connect to vehicle chassis ground Front Right z amp White ray Blacl Orange White wire Illumination lead Front Left Connect it to the car power supply terminal ite Blac for illumination o amp Purple Blue wire Auto antenna lead DC Connect it to the car power supply terminal for antenna Purple Black amp Green Not used Insulate each wire 8 Connecting the Accessories Connecting to the external amplifier External amplifiers can be connected to the 2 channel RCA output connections Ensure that the connectors are not grounded or shorted to prevent damage to the unit CZ2024 CZ202AR 13 Clarion Co Ltd All Rights Reserved Copyright 2011 Clarion Co Ltd Printed in China Dicetak di Cina 53 2144 PEME anuales du PN 127075003897
24. ppears in the display Only ASCII characters can be displayed in Tags Selecting a track Track up 1 Press the p button to move to the beginning of the next track 2 Each time you press the p button the track advances to the beginning of the next track 3 For MP3 WMA disc press and hold the 6 button 1 sec to move ahead to 10 tracks Track down 1 Press the r button to move back to the beginning of the current track 2 Press the lt q button twice to move back to the beginning of the previous track 3 For MP3 WMA disc press and hold the 5 button 1 sec to move back to 10 tracks Fast forward Fast reverse Fast forward Press and hold the gt button Fast reverse Press and hold the qq button For MP3 WMA discs it takes some time until the start of searching and between tracks In addition some error may occur in the play time CZ202A CZ2024R 7 8 CD MP3 WMA Operations Folder Select This function allows you to select a folder containing MP3 WMA files and start playing from the first track in the folder 1 Press the 5 or 6 button Press the 6 button to move the next folder Press the 5 button to move the previous folder 2 To select a track press the lt q or ppt button Search Function 1 Press the MENU button to enter FOLD SCH mode Press the VOLUME button to enter the folder list search mode 2 Turn the VO
25. r of the disc to the circumference Do not use any solvents such as commercially available cleaners anti static Spray or thinner to clean discs After using special disc cleaner let the disc dry off well before playing it On Discs Never turn off the power and remove the unit from the car with a disc loaded A CAUTION For your safety the driver should not insert or eject a disc while driving 5 OPERATIONS Basic Operations Note Refer to the diagrams in 3 CONTROLS when reading this chapter CAUTION When the unit is turned on starting and stopping the engine with its volume raised to the maximum level may harm your hearing Be careful about adjusting the volume Power on off Notes Start the engine before using this unit Becareful about using this unit for a long time without running the engine If you drain the car s battery too far you may not be able to start the engine and this can reduce the service life of the battery 1 Start the engine The power button knob illumination on the unit will light up Engine ON position 2 Press the SRC 5 button on the front panel or the remote control to turn on the power under standby mode The unit goes back to the last status after power on 3 Press and hold the SRC b button on the front panel or the remote control to turn off the power Mute Press the MUTE button on the remote control to
26. ting Frame 1 Insert this unit directly to the opening of the dashboard 2 Place M5x6 cylindrical screw through the holes of the mounting frame located inside the opening to holes of the unit and fasten the screws to left amp right Trim ring installation Attach the trim ring around the front panel Take care of the top and bottom of the trim ring and mount it so that all the hooks are locked To Note P Before attaching the mounting bracket slightly bend the spring toward the inside with your fingers and attach it to the side of car j jp Bottom Disassemble trim ring 1 2 Push the trim ring to right and pull out the right part N Push the trim ring to left and pull out the left part Disassemble the unit 1 2 3 4 5 Switch off the power Remove the panel Remove the trim ring Insert the removal keys straight back until they lock then pull the unit out Disconnect all the wires 7 Wiring and Connections Black White Tino ane Las vas Blac Red Antenna Black III Refer to next page Rear audio output Left Subwoofer output 1 co Rear audio output Right Subwoofer output 2 2 Channel Amplifier 16 Pin Connector Extension Lead attached to the source unit Fro
27. until RPT OFF appears on the display to cancel repeat playback and RPT segment goes off Random play This function allows you to play all tracks recorded on a disc in a random order Press the 3 button to perform random play USB Operations 1 Open the cover of the USB connector to the right Insert a USB cable CCA 755 into the USB connector Insert a USB device into the USB cable When connecting a USB device the unit will read the files automatically 2 To remove the USB device you should first select another source or turn off the power in order to avoid damaging the USB device Then take off the USB device Close the cover to the left 3 Operation is same as MP3 WMA operation iPod amp iPhone Operations Connect Connect an iPod or iPhone to the USB connector via CCA 748 cable When connecting a device the unit will read the files automatically The track information display on the screen once playback start MENU In the S CTRL OFF mode press MENU button rotate the VOLUME knob select MUSIC or VIDEO Select MUSIC press the VOLUME knob then rotate the VOLUME knob to show PLAY LISTS ARTISTS ALBUMS GENRES SONGS COMPOSERS press and rotate the VOLUME knob to select a desired option then press the VOLUME knob to confirm Select VIDEO press the VOLUME knob then rotate the VOLUME knob to show MOVIES MUSIC VIDEOS TV SHOWS VIDEO PODCASTS RENTALS
28. verwritten 2 The unit has 4 bands such as FM1 FM2 FM3 and AM FMS and AM can store by AS function Each bands can store 6 stations CZ202A CZ202AR can store 24 stations in total Manual store When one expected radio station has been detected press and hold number button 1 6 to store it in the memory Radio Operations Recall the stored stations Press one numeric button among 1 to 6 on the panel to select the corresponding stored station Local seeking When LOCAL seeking is ON only those radio stations with strong radio signal could be received CD MP3 WMA Operations This unit can playback MP3 WMA files Notes If you play a WMA file with active DRM Digital Rights Management there will be no audio To disable DRM Digital Rights Management When using Windows Media Player 9 10 11 click on TOOL gt OPTIONS gt COPY MUSIC tab then under COPY SETTINGS unclick the check box for COPY PROTECT MUSIC Then reconstruct files Personally constructed WMA files are used at your own responsibility Precautions when creating MP3 WMA file Usable sampling rates and bit rates 1 MP3 Sampling rate 8 kHz 48 kHz Bit rate 8 kbps 320 kbps VBR 2 WMA Bit rate 8 kbps 320 kbps File extensions 1 Always add a file extension MP3 WMA to MP3 WMA file by using single byte letters If you add a file extension other than specified or forget to add the file extension the file cannot be played
Download Pdf Manuals
Related Search