BS-750DMX USER MANUAL
Contents
1. da Ph hhli f l Switch 1 4 2 8 Binary Po ze on aseran 2 In DMX self test mode please follow below table for desired chase DMX Self test Dip switch 10 OFF 3 In MANUAL of self test mode spee and dimmer are classified as 16 levels respectively and are specified as follows Level Dip switch 1 2 3 4 Tu ou wy i Dip switch 2 3 4 UL2. I II INVO cir 11 BS 750DMX USER MANUAL PRODUCT DESCRIPTIONS Thank you for using our company the BS 750DMX it is a powerful DMX strobe that allows control flash speed and dimmer and it has two operating mode by changing DIP switch setting DMX self test mode and DMX pack mode Prior to use we suggest that you carefully read all of the instructions By following the instructions found in these operations you can look forward to reliable and satisfactory performance of your BS 750DMX for years to come TECHNICAL SPECIFICATIONS Power Input AC 120V 230V 60 50Hz 16A max Flash Tube DB901 1 750W 5x10 life Circuit Breaker 16A DMX In Out 3 pin female amp male XLR socket x 1 Dimensions L320xW136xH207 mm Weight 4 6Kgs REAR FUNCTIONS Power Input AC 120V 230V 60 50Hz 16A max Circuit breaker 16A Power Indicator Indicator when power is on DMX DIP switch Assign DIP switch 10 to ON the unit is in DMX pack mode Follow DMX addressing printed on the rear for desired speed and dimming settings Assign DIP switch 10 to OFF the unit is in DMX self test mode follow self test settings to select desired chase DMX Indicator Indicator when DMX is effective DMX Signal Output XLR female socket use to connect other strobe 7 ee DMX Signal Input XLR male socket use to receive DMX signal him 68 u OPERATION INSTRUCTIONS Please confirm power input is matched with that specifi
3. ed on this unit Plug in power cord to turn the power on This unit has two operating modes DMX self test mode and DMX pack mode Switch DIP switch 10 to OFF position this unit is in DMX self test mode There are two self test modes AUTO and MANUAL Set DIP switch 9 to OFF it performs AUTO self test When strobe flashes within the dimming range from 0 to 100 and then from 100 to 0 a slower or faster speed will be executed This strobe will flash with the regular speed corresponding to the variety of the duration of dimmer Set DIP switch 9 to ON it performs MANUAL self test DIPswitch 1 2 3 and 4 are assigned to control speed and DIP switch 5 6 7 and 8 are assigned to adjust dimming level Switch DIP switch 10 to ON position this unit is in DMX pack mode Follow DMxX address setting printed on the rear for desired flash speed and dimmer 6 For safety disconnect power cable when not using V WARNING 1 Avoid direct eye exposure 2 Disconnect from main power before replacing lamps or servicing unit 3 Remember to always replacewith same lamp 4 To prevent fire or shock hazard do not expose this unit to rain or moisture 5 This product must not be used continously longer than 15 minutes under maximum speed and dimmer IV APPENDIX 1 In DMX pack mode please refer to following illustrations for desired channel setting DMX Address Table DMX Address Setting Dip switch 10 ON Switch 1 2 3 4 5 6 7 8 9 10 START switcHs ON CH
Download Pdf Manuals
Related Search