Home
        DAVENHAM STEAM SHOWER ENCLOSURE
         Contents
1.  Fan button in for 3 seconds to switch the display from  Celsius to Fahrenheit  Image 7 8      emis      Ge   Steam ON OFF      Ki  L    Push the Steam ON OFF button to turn the steam function   on  Image 9   When the steam function is on the steam ON OFF  symbol flashes  The steam function is automatically turned off  when the cabin temperature reaches 4 degrees higher than the set  temperature and on when the temperature drops to 4 degrees  below the set temperature        customer service  1 866 855 2284   ei SIGNATURE HARDWARE Signaturehardware com    Davenham Steam Shower Enclosure Installation and User Manual 16    CONTROL PANEL              A  MP3    Press the MP3 button to select the MP3 function  Adjust the  channel to match the channel set on the MP3 emitter   Hold the MP3 button in for 3 seconds to set the channel and    volume     FM Radio ON OFF       Push the FM Radio ON OFF button to turn the radio function on   When the radio is on the FM Radio ON OFF symbol flashes  The  channel will default to that last selected      gt A   Volume Channel    Push the Volume Channel button with the radio on  Image 12  to  adjust the volume  Push the     7   A   buttons to make  adjustments as necessary             To change the channel  press the button twice when the radio is Image 12    on  Image 13   Push the Ki Al buttons to scan        Image 13    customer service  1 866 855 2284   ei SIGNATURE HARDWARE signaturehardware com    Davenham Steam Shower Enclosure Installatio
2.  MANUAL    LCD Display    zech       Fahrenheit     Celsius     Temperature    Temperature Indicator T     Timer Setting     FM Radio Function     FM Radio Volume     FM Radio Channel     Chromatherapy ON OFF  10  Fan ON OFF   11  Steam ON OFF   12  Power ON Indicator  13  FM Radio Channel   14  MP3 ON OFF    2  3  A  5  6  T  8  9    A     ei SIGNATURE HARDWARE    y QY  E      E  H          Pa  Ka    ei    II       customer service  1 866 855 2284  signaturehardware com    Davenham Steam Shower Enclosure Installation and User Manual 13    CONTROL PANEL    Steam Cabin Control Parts    zech       LCD Display    Control Panel      Water Diverter      Steam Outlet    Hand Shower Set    Oo dO N O a A O N    10  Steam Generator Cleaning Liquid Jet     ei SIGNATURE HARDWARE      Steam Temperature Sensor      Water Volume Adjustment    Water Temperature Adjustment      Back Massage Jet    Steam Cabin Control Panel  Power ON OFF   Steam Temperature Setting   Steam Timer Setting    Fan ON OFF    Chromatherapy    Steam ON OFF  MP3   Radio  Volume Channel  Radio Settings    Adjustment      Adjustment       customer service  1 866 855 2284    signaturehardware com    Davenham Steam Shower Enclosure Installation and User Manual 14    CONTROL PANEL       Push any button to light the display  Image 1   Push the Power  button to turn the system on  Image 2  and off  When the power   is turned off  the display and background light shuts off immediately  while the drain valve for the steam gen
3. DAVENHAM STEAM SHOWER ENCLOSURE    INSTALLATION AND USER MANUAL    KS     AS    DN ma  Jm        CONTENTS  Steam Shower Enclosure Installaton  eee 2  Technical INfOPMMAUOM BEE 2  Sieten Wlan 2  PAS SOIMONY TEE 3  TOOIS ANG WE EHNEN EEN 3  VS Cel AON EE 3  Safety INTOrMatiOn  icc 23 ccc ss hac Hele ee i eee 10  Steam Cabin Technical SGpechhcatons eee 11    n UCI EE 11  Bee MEI EE 11  CONE Ol AINE lives EE 12  Steam Generator Cleanmg    16  lee Ee e d du LE 17    customer service  1 866 855 2284  signaturehardware com     ei SIGNATURE HARDWARE    Davenham Steam Shower Enclosure Installation and User Manual 1    STEAM SHOWER ENCLOSURE INSTALLATION    Before you begin  read the following installation and care instructions  Observe all local plumbing  building  and electrical  codes     Unpack and inspect the product for any shipping damages  If you find damages  do not install  Contact Customer Service  at 1 866 855 2284  If you need assistance or have questions while installing your shower enclosure  contact Customer  Service     We recommend that all plumbing and electrical rough in work be completed by a professional prior to shower enclosure  assembly  Signature Hardware accepts no liability for any damage to the enclosure  walls  floor  or for personal injury  during installation     TECHNICAL INFORMATION    e 220 volt  20 amp GFCI breaker   e Line 1  line 2 and ground  1 dedicated line for steam    e The size of breakers and wire gages is determined by local  state  and nat
4. alls with assembly  screws and blocks provided         ST4 50 flat head tapping screw    front door frame       4  Attach the hand spray slide bar and shower basket     M4 25 screw    black O ring    technical panel     gt     M4 gasket           J       M4 gasket  a     black O ring           small copper meson     D M4 25 screw i        small decorative cap         chained holder        ei SIGNATURE HARDWARE    customer service  1 866 855 2284  signaturehardware com    Davenham Steam Shower Enclosure Installation and User Manual 4    5  Drill holes in Wall A and Wall B and insert the wall anchors  inflating nut   Attach the door frame to the wall with  the ST4 x 30 mm tapping screws     press block    ge nut       a 30 mushroom head tapping screw    is               6  Secure the door frame to the shower tray     ST4X25 flat head tapping screw q    lower track  Shower tray en    customer service  1 866 855 2284  signaturehardware com    a e                    ei SIGNATURE HARDWARE    Davenham Steam Shower Enclosure Installation and User Manual 5    7  Attach the right wall panel to the shower tray          ST4X16 round head  tapping screw    ST4X25 flat head  tapping screw    8  Attach the back wall panel to the shower tray     ST4X25 flat ei    ad tapping screw    ST4X16 round head H    tapping screw                  customer service  1 866 855 2284  signaturehardware com     ei SIGNATURE HARDWARE    Davenham Steam Shower Enclosure Installation and User Manual 6    9  Atta
5. ch the left wall panel to the shower tray           L_       ST4X16 round head tapping screw       a    ST4X16  round head tapping screw                10  Install the door panels     F type block A ST4X20 flat head tapping screw                                                             customer service  1 866 855 2284  signaturehardware com     ei SIGNATURE HARDWARE    Davenham Steam Shower Enclosure Installation and User Manual 7    11  Attach the top cover to the shower frame         amp    copper meson    ST4X16 flat head tapping screw    small decorative cap    12  Connect the flexible water feed tubes and electrical wiring to the corresponding outlets     jet pipe    GEN  Be  XQ    AS           8 1  exhaust fan     8 2  chromatherapy lamp     8 3  speaker     00000  e   ez CH    Z    Ceiling shower pipe    CS   o     ei SIGNATURE HARDWARE    customer service  1 866 855 2284    signaturehardware com    Davenham Steam Shower Enclosure Installation and User Manual 8    13  Install the shower door             gasket hinge back cover        movable glass door        gasket  main body    14  Attach the door handle to the shower door     customer service  1 866 855 2284  signaturehardware com     ei SIGNATURE HARDWARE    Davenham Steam Shower Enclosure Installation and User Manual 9    15  Install the plastic sealing and magnetic strips according to the drawing specifications to prevent leakage                                                              roof             mag
6. erator remains running for  one minute       Ir Steam Temperature Setting    The default steam temperature setting is 113 degrees  To adjust the  temperature  push the Steam Temperature Setting button    Image 3  until the desired temperature is reached  When the cabin  temperature reaches 4 degrees above the set temperature  the  steam generator automatically shuts off  When the cabin  temperature reaches 4 degrees below the set temperature the  steam generator automatically turns on       L  Steam Timer Setting    The default steam timer setting is 45 minutes  To adjust the timer  setting  push the Steam Timer Setting button  Image 4  until the  desired time is reached  The system automatically shuts off at the  end of the specified time        Image 4    customer service  1 866 855 2284   ei SIGNATURE HARDWARE signaturehardware com    Davenham Steam Shower Enclosure Installation and User Manual 15    CONTROL PANEL      Chromatherapy       The Chromatherapy button controls the color of the  chromatherapy lights  The chromatherapy symbol on the LCD  display flashes when the chromatherapy lights are turned on   Image 5   Press the Chromatherapy button to adjust the turn the  lights on and off and to adjust the lights as desired           e E d en  f b t Igi H i  s K R 4 E p E     E  d   cE 4 T wl fy H E      3  i  eh Le    Y3   Fan ON OFF  E    The Fan button turns the ventilation fan on and off  When the fan is  running  the fan symbol on the LCD display flashes     Hold the
7. hut off  Turn the water supply valve on if necessary     e Remove the scale on the water level sensor and clean with warm water and a mild detergent  Replace the scale if it  appears to be broken     e Make sure that the temperature setting is not lower than the room temperature  Reset the temperature if necessary   e Replace the thermal switch inside the heater    e Ifall parts appear to be clean and in working order and problems persist it may be necessary to replace the heater   If water does not stop being added to the steam generator    e Replace the water inlet valve     e Remove the scale on the water level sensor and clean with warm water and a mild detergent  If problems persist it  may be necessary to replace the scale     If the unit will not turn ON    e Replace the heater or thermal switch   If water is leaking from the valve    e Replace the valve seal    If the water flow volume is low     e Impurities in the water supply can clog the filter resulting in low water flow  To remove clogs  remove the filter and  rise with warm water     customer service  1 866 855 2284  signaturehardware com     ei SIGNATURE HARDWARE    Davenham Steam Shower Enclosure Installation and User Manual 19    
8. iate GFCI should be provided by the installer and should be tested on a routine basis    e To test the GFCI  push the Test button  The GFCI should power off  Push the Reset button to restore the power  If  the GFCI fails to operate in this matter  it is defective    e Ifthe GFCI fails to provide power to the shower enclosure and a ground current is flowing the user could potential   ly incur an electric shock  Do not use the shower enclosure and repairs performed by a qualified electrician before  using    e Agreen colored terminal  or wire connector marked    G        GR     or    Ground     is provided within the front column  To  reduce the risk of electric shock  connect this terminal or connector to the grounding terminal of your electric service  or supply panel with a connector equivalent in size to the circuit of the conductors supplying this equipment     To reduce the risk of injury     e The wet surfaces of steam enclosures may be slippery  Use care when entering or leaving    e The steam head is hot  Do not touch the steam head and avoid the steam near the steam head    e Prolonged use of the steam system can raise internal body temperature and impair your body s ability to regulate  temperature  hyperthermia   Limit steam use to 10     15 minutes at a time until you are certain of your body   s  reaction    e Excessive temperatures have a high potential for causing fetal damage during the early months of pregnancy   Pregnant or possibly pregnant women should cons
9. ional codes as interpreted by the installing  electrician     PLUMBING REQUIREMENTS    e This unit is equipped with hot and cold braided water supplies with 1   2  NPT pipe threads    e     Install hot and cold shut off valves with 1   2  male NPT pipe threads to connect to water supplies    e     Tighten all connections prior to installation    e We recommend preparing the drain location with the shower enclosure base on site  A drain pipe 2  in diameter is  required  hose can stretch 6      customer service  1 866 855 2284  signaturehardware com     ei SIGNATURE HARDWARE    Davenham Steam Shower Enclosure Installation and User Manual 2    ASSEMBLY    TOOLS AND MATERIALS     Level Screwdriver Silicone Sealant  Caulking Gun Adjustable Wrench Drill   Set Square Rubber Mallet   INSTALLATION    1  The distance between Wall A and Wall B should be within 58  59   The distance between the Floor Drain and  Wall C should be less than 23   Use a level to verify that the walls are perfectly straight     Wall A Wall C Wall B    mg  Le Floor Drain    2  Set the shower tray in place  Place a level on the tray and adjust the tray legs as necessary until completely  straight  Each leg should be touching the floor        eg fixep after adjusting       customer service  1 866 855 2284   ei SIGNATURE HARDWARE signaturehardware com    Davenham Steam Shower Enclosure Installation and User Manual 3    3  With a drill  insert the assembly nuts into Wall A and Wall B  Attach the door frame to the w
10. n and User Manual 17    CONTROL PANEL    Radio Settings    Selecting and saving preset radio stations     e Turn the radio on    e Push the Radio Settings button twice to display the preset numbers  1 8  Image 14     e Scan to the desired station and hold the Radio Settings button until  the appropriate preset number is displayed     Finding a preset station     e Turn the radio on   e Push the Radio Settings button to scan through the preset stations     STEAM GENERATOR CLEANING    To clean the steam generator  remove the cover from the cleaning  liquid inlet  Input 1L of mild detergent  Turn the steam function on  to fill the generator with water  Before steam is released  turn the  steam function off  Do not shut off the control system  the system  will drain the dirty water automatically after 60 minutes  Repeat  these steps to clean the steam generator every 3 months      ei SIGNATURE HARDWARE             Image 14  Leg e   xw  a d     e  CO                  customer service  1 866 855 2284  signaturehardware com    Davenham Steam Shower Enclosure Installation and User Manual 18    TROUBLESHOOTING    If the touch panel is not functioning properly     e Check the connection from the control panel to the power box  If the control panel and power box are properly  connected and problems persist it may be necessary to replace the panel or box     If the steam function is ON but no steam is being released into the cabin   e Check to ensure the water supply valve has not been s
11. netic stripe on the movable door       309B seal E             movable glass door                                     fixed door  i  ovaie glaSs door                                                  movable glass door                                  shower tray             16  Install the decorative trim pieces     aa SS CG E      4 4  lt 5 CZ E E     Be    customer service  1 866 855 2284  signaturehardware com     ei SIGNATURE HARDWARE    Davenham Steam Shower Enclosure Installation and User Manual 10    14  Apply silicone sealant around the base of the shower  Connect the steam drainage pipe to the floor drain     LEN  E    15  Install the shower grid and shower seat  Allow the silicone sealant to dry for at least 24 hours before using your  new steam shower           CA NN  Jim    customer service  1 866 855 2284  signaturehardware com     ei SIGNATURE HARDWARE    Davenham Steam Shower Enclosure Installation and User Manual 11    SAFETY INFORMATION    e When using this unit  basic safety precautions should always be followed    e Children under the age of 16 should not be permitted to use the steam shower enclosure    e Use this unit only for its intended purposes as described in this manual  Do not use any additional attachments not  recommended by the manufacturer    e Never drop or insert objects into openings in the steam shower enclosure    e The unit must be connected to a supply circuit that is protected by a ground fault circuit interrupter  GFCI   The ap   propr
12. ult a physician regarding correct exposure    e Obese persons and persons with a history of heart disease  low or high blood pressure  circulatory problems  or  diabetes should consult a physician before using the steam system    e  f using medication  consult a physician before using the steam system as some medication may induce drowsiness  or affect heart rate  blood pressure and circulation     Hyperthermia warning     Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal body  temperature of 98 6   F  The symptoms of hyperthermia include dizziness  lethargy  drowsiness  and fainting  The effects  of hyperthermia include     e Failure to perceive heat   e Failure to recognize the need to exit the steam shower  e Unawareness of impending risk   e Fetal damage in pregnant women   e Physical inability to exit the steam shower   e Unconsciousness    WARNING      The use of alcohol  drugs  or medication can greatly increase the risk of hyperthermia    customer service  1 866 855 2284   ei SIGNATURE HARDWARE signaturehardware com    Davenham Steam Shower Enclosure Installation and User Manual 12    STEAM CABIN TECHNICAL SPECIFICATIONS    Rated Power  3 0 KW   Rated Voltage  AC240V   Rated Electric Current  16A   Frequency  60 Hz   Power Supply Location  Wall   Water Supply     2  NPT pipe thread  hot cold water  Water Supply Location  Wall   Diameter of Drainage Pipe  1 72  flex pipe   Length of Drainage Pipe  39     USER
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
取扱説明書 - DXアンテナ    Copyright © All rights reserved. 
   Failed to retrieve file