Professional Ultrasonic Cleaner
Contents
1. 1 2 Items Not Suitable for Ultrasonic Cleaning Z Applications 3 4 5 Sample Applications 5 6 Product Structure and Accessories 7 Product Explosion View 8 9 Control Panel and Operations 10 11 Common Cleaning Methods 11 12 13 Operation Guidelines 14 15 Care and Maintenance 16 Usage Guide for AccessorieS 17 SAFETY PRECAUTIONS A Keep it away from children This appliance can be used by children aged from 8 years and above if they have been given ih supervision or2. This unit is equipped with a thermal cutoff If the cleaning function is turned on without water in the tank the temperature will rise continuously The thermal cutoff will be actuated after approximately 15 minutes respectively to ensure safety The unit will be disabled until it is repaired Do not run the unit for extended time or continuously The unit is designed with overheat protection If the unit has been running for 45 minutes it is recommended to stop the unit for about 20 minutes to prolong the life of the unit Do not keep water in the cleaning tank for a long time After cleaning is completed open the drainage valve to drain the dirty water Clean and wipe the tank dry Do not spray water over the housing Use a towel to wipe the tank and the housing dry Do not expose the unit under direct sunshine for a long time Keep the unit in a dry cool and ventilated area USAGE GUIDE FOR ACCESSORIES PLASTIC BASKET The basket has foldable handles It can be raised and suspended above the water to drain INDIREST CLEANING TANK Put the stainle
3. Products Limited Large stainless steel tank Suspendible basket Drainage valve 2 x industrial grade ultrasonic transducers 2 x ceramic heaters 3 x colour LED display Independent control circuit for each ultrasonic transducer Multiple circuit protectors Moisture proofed PCB with industrial IC 2 x cooling fans Degas feature Engineering grade plastics 14 05 047 V Ae ULT 5020 Professional Ultrasonic Cleaner Tank capacity 6 0 L 1 6 gallon Tank size 32 5 x 20 5 x 9 9 cm 12 7 x 8 1 x 3 9 Patented design basket can be raised and suspended to drain water Convenient to use Uniform distribution of ultrasonic waves strong cleaning high durability Mounted underneath the bottom of the tank for safe and even heating more durability construction 1 to 30 minute full range timer 5 temperature settings actual temperature thermometer degas and solution usage timer 40 higher efficiency not susceptible to interference more durable When overloaded or improperly used the protectors shut down the power to certain areas to protect the machine Capable for different working environments with better anti interference performance One for cooling of PCB boards one for cooling of ultrasonic transducers Improve heat dissipation and beneficial for continuous operations Removes air bubbles quickly Better water proof and drop proof properties INTRODUCTION Use tap water Special solutions are
4. Gun cleaning and care Cleaning guns after shooting is time consuming Using SeaClean2 solution in the water and using ultrasonic cleaners can complete the cleaning better quicker and easier than traditional methods Special Education Institutes Kindergartens Speech therapy tools or small toys that are reused need to be cleaned to prevent the growth and spread of bacteria Ultrasonic cleaning can perform thorough cleaning by removing debris hidden inside small holes and crevices before disinfection 10 Golf Clubs 11 Cleaning the heads of golf clubs is a time consuming job Using ultrasonic cleaning with the Enhanced Cleaning method can improve the effectiveness and efficiency Mobile Phone and Electronics Service Shops PCB renewal Non operational electronics after falling into water or non operational key pads can be cleaned with ultrasonic cleaners and pure alcohol to recover the functions Use the Indirect Cleaning method for small sized PCBs APPLICATIONS 12 13 Homes Silverware silver copper or brass decorations It s difficult to clean debris hidden in the patterns with regular methods Ultrasonic cleaning with 50ml 3 tablespoons of dish soap will clean the debris quickly For silver copper or brass items with oxidation which has darkened the items adding small amount of SeaClean2 solution helps to remove oxidation and using ultrasonic cleaning will restore the shine Children or baby it
5. This is the most common timer setting and working state If the timer needs to be adjusted press Time button and button The timer can be set between 1 to 30 minutes Common cleaning times are 5 10 or 15 minutes Prolonged cleaning time may result in a Loosening of the screws if used b Increasing pre existing cracks c Peeling of coating which was already separated Press On Off button to start cleaning During cleaning buzzing sound can be heard from the cleaning tank indicating that the cleaning is underway Closing the lid will reduce the noise level The digital timer will count down to show the remaining cleaning time When it displays Gi 03 the cleaning is done To stop cleaning at any time press On Off button The unit is designed with overheating protection to avoid extended and continuous operation for too long When the red light is on the unit will not turn on even if it is forced to The unit will be idled for about 20 minutes and can be restarted after the green light comes on Select one of the 4 cleaning methods recommended earlier a When the heater is needed press TEMP button to select one of the 5 preset temperatures Press Heater button t flashes indicating the heater is turned on When the water reaches the set temperature X dims indicating the heater is turned off To ensure safety the unit is designed with dual protections The heater will be turned off automatically if i
6. a level between MIN and MAX do not overflow 3 Turn the power switch on Press Time button to set the timer to 10 minutes Press On Off button to start cleaning Ultrasonic waves will penetrate the container and clean the items Selection of container 1 Plastic containers Plastics are soft and will absorb about 30 of ultrasound energy and reduce the cleaning effect 2 Aluminum containers Absorbs about 20 of ultrasonic energy 3 Stainless steel containers Absorbs about 8 of ultrasonic energy NOTE Optional stainless steel indirect cleaning tank is available with this model ENHANCED CLEANING Debris accumulated over a long period of time greasy or heavily soiled Suitable Locations metal processing and jewellery makers hardware manufacturers shooting clubs homes golf clubs automotive repair shops Cleaning Method 1 Large items can be put in the tank directly Small items can be put in the basket then put in the tank Do not put the items on top of each other to avoid rubbing during cleaning 2 Add water to a level between MIN and MAX and above the area to be cleaned 3 Add 50 ml 3 tablespoons of dishwashing liquid STE d M 4 Turn the power switch on Press Temp button to set the water temperature to 45 C 113 F Press Heater button to turn on the heater 4 flashes Close the lid LED lights up When water reaches the set temperature U dims indicating the
7. above the Max line e Do not use solution containing abrasive substances or strong corrosive chemical solution not recommended by the manufacturer or the supplier e Place the device on a dry and flat surface for operation e When the device is subjected to severe electromagnetic interference it may malfunction stop operating or lose control functions If this happens unplug the power cord then re insert it to restart the device IMPORTANT SAFETY INSTRUCTIONS When using electric appliances basic precautions should always be followed including the following e Read all the instructions before using the appliance e To reduce the risk of injury close supervision is necessary when an appliance is used near children e Only use attachments recommended or sold by the manufacturer e Do not use outdoors e To disconnect turn all controls to the off O position then remove plug from outlet Do not unplug by pulling on cord To unplug grasp the plug not the cord Unplug from outlet when not in use and before servicing or cleaning e To reduce the risk of electrical shock do not put the appliance in water or other liquid Do not place or store appliance where it can fall or be pulled into a tub or sink e All servicing of this product including transducer replacement is to be conducted by qualified service personnel e Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is
8. dropped or damaged in any manner e Return appliance to the nearest authorized service facility for examination repair or electrical or mechanical adjustment N Items Not Suitable for Ultrasonic Cleaning Soft Jewellery Pearls emerald ivory coral agate These items are not hard so scratches may occur during cleaning sea turtle shells etc Welded Plated and Glued Items Ultrasonic cleaning may enlarge the gaps inside the welded joints Welded or plated metal items glued items plated coating or glued items and may cause separation Watches Because the strong penetration capability of the ultrasonic waves Except diver s watches with depth water may get into the watches if they are not truly waterproof Use rating over 50 m 150 ft the watch stand supplied as a precaution if not sure Others Ultrasonic cleaning may enlarge the cracks pre existed in the Wood coated glass ceramic camera coating on the glasses ceramic and glass If the items have no filters with pre existing cracks pre existing cracks then it is okay APPLICATIONS 1 Metal Processing Manufacturers and Jewellery Makers Ultrasonic cleaning can remove grease or abrasive powder from work in process metal items and keep them clean Jewellery made with investment casting often has wax layer in addition to debris Turning on the heater will raise the water temperature melt the wax and improve the cleaning 2 Optical Labs During edging and po
9. not necessary in most cases Principles of ultrasonic cleaning Millions of tiny air bubbles are generated within liquid by high frequency vibration The air bubbles burst when in contact with object and dislodge the debris to achieve the cleaning effect e Using tap water is sufficient Purified water or distilled water has the same cleaning effect as AN regular tap water for ultrasonic cleaning e When cleaning silver or copper items where oxidation has darkened the items special solutions such as SeaClean2 needs to be added to the water to remove the oxidation Main Features e 6 0L 1 6 gallon tank capacity Tank opening 32 5 x 20 5 x 9 9 cm 12 7 x 8 1 x 3 9 Longest item that can fit inside the tank is 34 0 cm 13 4 e Suspendible basket to drain water conveniently e 2x industrial grade ultrasonic transducers 2 x 55 W 110 W 2 x ceramic heaters 2 x 80 W 160 W e 3x colour LED display 1 to 30 minute full range timer 5 temperature settings Actual temperature thermometer Solution usage timer Working status indicators Degas feature e Independent control circuits and multiple circuit protections e Industrial grade IC Moisture proofed PCB Cooling fan Drainage valve Read the Manual First The manual should be carefully reviewed before starting to use the device Warnings should be observed carefully Please follow the manual for operations TABLE OF CONTENTS Safety Precautions
10. arings gears valves tools fuel injectors etc Test tubes beakers flasks etc GOLF CLUBS JA gt r Eran Golf clubs and golf balls PERSONAL ITEMS Eyeglasses sunglasses shaver heads watch bands diver s watches dentures etc Silverware silver copper or brass decorations etc BRASS GUN PARTS Reusable brass gun parts etc ELECTRICAL PARTS Terminals for relays and contactors MEDICAL DENTAL Surgical instruments pliers handpieces etc BABY ITEMS Toys baby items speech therapy tools etc PCB INKJET CARTRIDGES PCBs from mobile phones and MP4 ink cartridges etc Lenses crystals PRODUCT DETAIL Top cover Stainless steel tank Housing Drainage pipe fitting Drainage valve handle Control panel Handles Ta 7 m OU A BW D Power switch Power socket J Cover holder Optional Accessory Myy all Professional Ultrasonic Cleaner as D D Ey Es me 3 Bea cesar 4 5 4 7 6 7 r a 9 8 4 Ss y if ti ws gt SP Wi 10 ik gt h I A Ih RERE Power Cord Indirect cleaning tank Size 21 7x18 5x7 4 cm Capacity 2 1 L Internal size 19 8x16 6x7 35 cm gt O Lhd O O aA x z5 U m O O oe a O tS SSS ae 9 Item Top handle Lid windo
11. d on To cancel heating press heater button again dims indicating the heater is turned off When the water reaches the set temperature the heater will turn off automatically 12 Function Button Press function button illuminates indicating Degas function is selected Press On Off button to start degassing will flash for 90 seconds then the unit will return to the normal cleaning function Pressing Function button before it ends will stop degassing If additional degassing is needed after it ends then press Function button again Degas When cleaning heavily soiled or greasy items or silver copper or brass items chemical solutions need to be added into the water The solution may form many small droplets and take a long time to dissolve in the water Newly added water may generate many air bubbles on the tank walls These will reduce the cleaning effect in the beginning phase of ultrasonic cleaning Turning on the degas function will dissipate the droplets and the air bubbles usually in 90 seconds and improve cleaning efficiency 13 On Off Button After powering on the LED displays amp 5 02 which is the default time as shown in picture and the unit is ready with the normal working status Press On Off button once and the cleaning starts The cleaning stops when the timer counts down to UG U7 If the unit needs to be stopped before the timer runs out press On Off button 14 V Decreasing Button a When Time is us
12. ed each pressing reduces the timer by 1 minute b When Temp is used each pressing reduces the set temperature down to the next level c When Oh min is used each pressing reduces the solution set time by 20 minutes 15 h min Solution Usage Timer Set Button Each time that button is pressed timer is increased by 20 minutes For example 20 indicates that the solution is set to be used for 1 hour and 20 minutes The maximum time that can be set is 9 hours 59 minutes 16 Temperature Set Button 5 set temperatures can be selected Press Temp button to select the temperature in the following sequence i 40 C or 104 F 45 C or 113 F 50 C or 122 F 55 C or 131 F gt 60 C or 140 F zj 17 Timer Quick Set Button Press Time button LED display shows 05 00 Each pressing increases the time by 5 minutes COMMON CLEANING METHODS REGULAR CLEANING Only tap water is needed Suitable Locations Jewellery makers optical labs biology chemical labs homes speech therapy clinics kindergartens nursery schools Cleaning Method 1 Put the items to be cleaned inside the basket and put the basket inside the tank 2 Add water to the cleaning tank to a level between MIN and MAX lines and above the area to be cleaned 3 Turn the power switch on Press Time button to set the timer to 5 10 minutes Press On Off button to start cleaning Notes on using the basket 1 The basket reduces the
13. ems Debris left in the small holes and crevices are difficult to clean Bacteria and molds can grow Using an ultrasonic cleaner will deep clean the items before disinfection Crystal glasses and decorations chandeliers Ultrasonic cleaning can bring back the sparkles and make them look like new again Jewellery eyewear watch bands shavers or razors Ultrasonic cleaning can clean the debris in the crevices It is quick and convenient This model has a large tank When cleaning small items the Indirect Cleaning method can be used with satisfactory results Smaller ultrasonic cleaners can also do the job Printing Shops Unblocking dried printer heads or ink cartridges Large printers and inkjet printers often have dried printer heads or ink cartridge ports Replacing them with new ones is very costly Adding acetone or SeaClean2 and using an ultrasonic cleaner with a couple of minutes of cleaning will remove the blockage and make them usable again Avoid acetone from contacting the plastic housing to prevent corrosion Use Indirect Cleaning explained later and a glass or metal container for acetone 14 Automotive Repair Shops The Enhanced Cleaning method can be used to clean precision parts such as valves injectors gears and bearings It cleans out debris in tiny holes and crevices effectively SAMPLE APPLICATIONS JEWELLERY _ he i Sa L ww f Necklaces rings earrings bracelets etc PRECISION PARTS Be
14. friction between the items and the tank but a plastic basket absorbs about 30 of ultrasonic energy and reduces the cleaning effect 2 During cleaning dirt will come off like smoke and the water will become murky over time When smoke stops coming the cleaning is basically done INDIRECT CLEANING Put the items in a separate container Use ultrasonic waves to penetrate the container to do the cleaning Suitable Locations medical instrument sterilisation rooms precision electrical parts manufacturers watch and precision parts manufacturers mobile phone and electronics service shops large printing shops Different industries use different fluids inside the container 1 Watch service shops Watch oil to prevent rust 2 Medical instrument sterilisation Special solution cleaning prior to sterilization 3 Precision electrical parts Hexane to dissolve grease to evaporate quickly 4 Mobile phone and electronic service shops Pure alcohol to evaporate quickly 5 Printing shops Acetone are often used to dissolve ink 6 Homes Rubbing alcohol fo remove odor to clean and to disinfect at the same time Avoid acetone from contacting the plastic housing to prevent corrosion Use Indirect Cleaning and a glass or metal container for acetone Cleaning Method 1 Put the item inside a container Add proper fluid to submerge the area to be cleaned 2 Place the container in the tank directly Add water to
15. heater is turned off Warm water and dishwashing liquid can soften grease and improve cleaning efficiency 5 Press Time button to set the timer to 15 minutes Press On Off button to start cleaning Grease will dissipate and appear to be like black smoke in the water 6 When it stops open the drainage valve to release the dirty water Close the valve afterwards 7 Clean the tank and add fresh water Wash the items for another 3 minutes to remove the residual debris and the detergent SPECAL CLEANING Silver copper or brass items with oxidation which has darkened the items will need special cleaning Suitable Locations silver copper or brass product manufacturers home shooting clubs Cleaning Method Put the items in the basket and then in the tank add water to a level between MIN and MAX and above the area to be cleaned 2 Add special solution SeaClean2 that can remove silver or copper oxidation according to the ratio recommended typically 1 10 Use special solutions according to the instructions for brass cartridges 3 Turn the power switch on Press Temp button to set the water temperature to 50 C 122 F Press Heater button to turn on the heater flashes Close the lid LED eas lights up indicating the percentage range of the set temperature being reached When water reaches the set temperature 3 dims indicating the heater is turned off The heater has dual protection It will be turned
16. instruction concerning use of the appliance in a safe way and if they understand the hazards involved Cleaning and user maintenance shall not be made by children unless they are aged 8 years and above and supervised Keep the appliance and its cord out of reach of children aged less than 8 years e Please store the ultrasonic cleaner where it is inaccessible by children e Danger to children Danger for death through suffocation Keep packaging material away from children e This appliance should not be used by children Keep the appliance and its cord out of reach of children AN To prevent life threatening electrical shock please observe the following AN Danger of electrical shock Do not use while bathing Never immerse the device or the power cord 9 in water or other liquid J Danger of electrical shock Never touch the power plug with wet hands especially when inserting or removing the plug e Danger of electrical shock If the unit has fallen into water during operation do not touch the unit Remove the power plug from the socket first e Danger of electrical shock Do not spray water or liquid over the device e Never operate the device unattended e Follow the manual to operate the device e Do not use components unapproved by the manufacturer e When removing the power cord from the socket grab the power plug not the cord e To protect the power cord from damage do not cause it to get caught by things such as cupboard doo
17. lishing debris and abrasives can scratch lenses Ultrasonic cleaning can effectively protect the lenses Debris exists in the crevices of the frames during processing and polishing Using ultrasonic cleaner and tap water can easily remove the debris 3 Biology Chemical Laboratories Labs can use ultrasonic cleaners to clean test tubes and other glass or metal containers to remove residual chemicals and debris that can affect the accuracy of the test results 4 Medical Instrument Disinfection Rooms Non disposable medical instruments may have blood or organic tissues left after use They need to be removed with ultrasonic cleaners before disinfection 5 Dental Clinics Dental clinics can use ultrasonic cleaners to clean dental instruments and to remove blood and small particles left on the instruments before disinfection 6 Electrical Component Manufacturers Terminals on AC contactors and relays need to be kept clean to prevent sparking and non contact Ultrasonic cleaning is the most effective method to keep these parts cleaning APPLICATIONS Watch and Precision Metal Part Manufacturers Machined watch components and other precision metal parts often have coolant and debris left on the surfaces Ultrasonic cleaning can remove the debris and keep the parts clean Shooting Clubs To reuse brass cartridges Adding special solution such as SeaClean2 solution can make fired brass casings useable and like new again
18. off automatically after 50 minutes 4 Press h min button to set solution usage time Each pressing increases the time by 20 minutes Press W button to reduce the time by 20 minutes each time Common time is 8 47 or 1 00 Refer to the instruction from the solution manufacturer 5 Press Time button to set the timer to 15 minutes 6 Press Function button to select the degas function amp button illuminates Press On Off to start degassing After 90 seconds it changes over to normal cleaning automatically 7 When it is done remove the basket and the items Rinse the items with tap water or follow steps 6 and 7 in the Enhanced Cleaning section During cleaning debris will come off the items like smoke Water will become murky This method will remove silver or copper oxidation and debris in the decorating patterns and crevices and make the items like new again OPERATING GUIDELINES C f A asg h8 Im ee TF Remove the cover and put it on the cover holder vertically Put items in the basket then put them in the cleaning tank Add water to a level between MIN and MAX and above the area to be cleaned If the unit is turned on without water ultrasonic energy will not be absorbed This model also has high power Once on for over 15 seconds it may damage the unit or severely reduce the life of the unit Connect the power cord to an outlet and turn the switch on LED display shows 5 0
19. r or a chair leg do not drag across a hot surface e lf there is damage to the power plug cord housing or other parts of the device do not use the device e Do not disassemble the device except by professionals e Ifthe unit is damaged non operational or has fallen into water take it to a qualified service provider e Remove the power plug from the socket if malfunction occurs before cleaning the device if the device is not going to be used for prolonged period after each use recommended e The installation of an earth leakage circuit breaker with a rated tripping current of no more than 30 mA provides further protection against an electrical shock The installation should only be carried out by a trained electrician AN To prevent fire hazards please observe the following e Never block the vents on the device Keep the vents free from lint hair and other materials e Do not place the device on a soft surface such as a bed or a couch where the vents could be blocked e Observe the other warnings in the previous section e lf the supply cord is damaged it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard SAFETY PRECAUTIONS A N Other observations e Do not operate the product without filling the tank with water Running dry will damage the unit e Do not plug in the power cord before adding water to the tank To avoid overspill do not fill the tank
20. ry rights under common law are in no way affected by this guarantee James Products Ltd Unit 1 Church Close Business Park Todber Sturminster Newton Dorset DT10 1JH England Tel 44 0 1258 820100 Fax 44 0 1258 820550 When returning your unit please call our Returns Department on 44 0 1258 822516 for a RMA Returns Materials Authorisation number Please return your unit in its original packaging along with a covering letter stating when and where you purchased the unit and a description of the problem encountered If the unit is within the guarantee period please enclose proof of purchase LIMITED WARRANTY Consequential and incidental damages including without limitation loss of property and those arising from breach of any express or implied warranty are not the responsibility of James Products Limited and to the extent permitted by law are excluded In accordance with its policy of progressive product design James Products Ltd reserves the right to change product specifications without prior notice Repair or replacement is at the discretion of the manufacturer ames Products Limited www jamesproducts co uk Registered in England No 5250754 Registered Office James Products Ltd Unit 1 Church Close Business Park Todber Sturminster Newton Dorset DT10 1JH England
21. ss steel tank optional accessory on top of the fixed tank as shown Add water in the fixed tank Add chemicals or special solutions SeaClean2 in the indirect cleaning tank Cleaning efficiency can reach 90 of direct cleaning SPECIFICATIONS Description Model Tank Capacity Tank Size Longest Item Fits inside Tank Power Supply Digital Timer Settings Drainage Ultrasonic Frequency Tank Material Housing Material Net Weight Gross Weight Unit Size Professional Ultrasonic Cleaner ULTRA 9020 6 0L Max 5 0 L 1 3 gallon US 1 6 gallon US Min 3 35 L 0 9 gallon US 920K 200X909 CN AZ XO Xoo 34 0 cm 13 4 300 W AC 220 240V 50 60HZz 1 to 30 minute full range timer Drainage valve 35 000 Hz Stainless Steel SUS304 ABS 7 5 kg 16 5 Ib 8 6 kg 19 0 Ib 51 5 x 30 5 x 24 0 cm 20 3 x 12 0 x 9 4 GUARANTEE Your Ultrasonic Cleaner has been carefully manufactured and 100 tested using high quality assured components It is guaranteed against faulty workmanship and materials for a period of 12 months from the date of purchase In the unlikely event that a failure should occur the unit will be repaired or replaced free of charge when returned postage paid to the address below within the guarantee period This guarantee DOES NOT include damage or failure resulting from misuse damage in transit or failure by the user to comply with the Dos and Don ts this list is not exhaustive Your statuto
22. t has been running for 50 minutes 3 gt Thermometer lights 200 ee up to indicate the 0 30 60 90 percentage of the set i i temperature reached b If solution is added to speed up the mixing and to use less solution use degas function Press TIME button to set the timer to 10 minutes then press Function button illuminates Press On Off to start degassing It changes over to normal cleaning automatically after 90 seconds c When debris smoke is no longer visible cleaning is done If additional cleaning is needed reset the timer and repeat the steps above When cleaning is completed switch off the power open the lid and retrieve the basket and the items Alternatively raise and suspend the basket above water as illustrated in the Usage Guide for Accessories section to Te drain water Zr ily N lia amp S Connect the hose to the drainage pipe as shown 7 Open the drainage valve to drain the dirty water Clean and wipe the tank dry Close the drainage valve Nt W A a A 9 CARE AND MAINTENANCE Do not turn on the unit without water in the tank Even though the unit is designed with multiple protections if it is turned on for over 30 seconds without water in the tank it may damage the unit or severely reduce the life of the unit If heating over 3 minutes it will damage the heater
23. ure is 60 90 of the set temperature Flashing red light indicates that the water temperature is close to the set temperature All lights on indicate that the water temperature is at the set temperature 90 100 3 OE Set Temperature Display Press Temp button to select one of the 5 set temperatures ALO or 104 F gt 45 C or 113 F gt 50 C or 122 F gt 55 C or 131 F gt 60 C or 140 F E 4 C F C or F Indicator C Set temperature in C F Set temperature in F 5 LUT Solution usage remaining time It counts down to show the remaining usage time hour minute of the solution 6 0 Solution Warning Light Once the Solution Usage Timer is set the light will come up The light will flash when the solution needs changing 7 ie Degas Status Illuminated the degas function is selected amp Flashing degassing is underway 8 Normal Cleaning Status Illuminated normal cleaning is underway 9 U4 Heater Status Press Heater button flashes indicating the heater is turned on Press Heater button again X dims indicating the heater is turned off 10 Working Status Green Ready G Normal working status ready to use Red Overheat R Under overheat protection 20 minutes or more of waiting time is needed for the light to change from red to green Work can resume afterwards 11 Heater Button Pressing heater button flashes indicating the heater is turne
24. w Lid top Lid bottom Top ring Stainless steel handle Basket foldable handle 1 Basket foldable handle 2 Plastic basket Left up handle Left down handle Silicone seal Left cover Stainless steel tank Front cover Spout Washer Nut Hose Nut Spout Ball valve Bracket Valve handle Elbow Inner tank Bottom cover Power PCB 1 Power PCB 2 Right cover Right down handle Right up handle Transducer PCB Right panel Cooling fan Power switch PCB Power switch Power socket Back cover Cover holder Hose Thermal cut off Heater cover Heater pocket Thermocouple holder Button pad Light socket Film Control panel box Control panel cover Key pad cover Material ABS AS ABS ABS ABS SUS 304 ABS ABS ABS ABS ABS Silicone rubber ABS SUS 304 ABS SUS 304 AL AL Silicone rubber ABS ABS Standard part ABS ABS ABS ABS ABS 94Vo 94Vo ABS ABS ABS 94Vo ABS Standard part 94Vo Standard part Standard part ABS ABS Silicone rubber A0 3A F PA 66 PA 66 ABS 94Vo ABS PC AS ABS TRP 40 CONTROL PANEL AND OPERATIONS M Working Time Display It counts down after work is started 2 man Multistage Thermometer at Solid green light indicates that the water temperature is 0 30 of the set temperature A Solid orange light indicates that the water temperature is 30 60 of the set temperature Solid red light indicates that the water temperat
Download Pdf Manuals
Related Search