DM 2000
Contents
1. LENS USER S MANUAL DRILLING MACHINE DM 2000 e LUXVISION PRECISION INSTRUMENTS Notification Dear Users Thank you for your purchase of DM 2000 Lens Drilling Machine Please take time to read our user s manual carefully before use This guarantees you to make full use of this unit and prolongs the operation life of this unit Precautions If you have detected abnormal heat smoke noise or smell immediately stop using the product In the event of an abnormality turn off the power and disconnect the power plug from the power socket Continuing to use the product may result in electric shock or fire Observe the instructions given below regarding the power cable Be sure to use the supplied or specified power cable Do not modify forcibly bend kink or pull the power cable When disconnecting the power cable from the AC outlet be sure to hold the cable by the plug Pulling the cable may cause wire breakage or shot circuit resulting in fire or electric shock Do not connect or disconnect the plug of the power cable to from the AC outlet using wet hands Doing so may result in electric shock Do not touch the product with wet hands while the power cable is connected to the AC outlet Doing so may result in electric shock Ifthe product will not be used for a long period disconnect the power cable from the power source Leaving the cable connected to the power socket for a prolonged period will consume e2. use part 8 depth locator to adjust and ensure that the surface of dial will not be injured when drilling The two red nips on Lens Holder is used to fix lens Up turn to loose and down turn to fasten Before drilling put and fasten the lens wanted relatively according to Right and Left scale and Fore and Aft Scale then use the screw to adjust the lens to correct position If drill and mill the edger of lens move the screw of lens holder to point B Lens Holder may be moved freely 4 Specifications 220 240V 10 120V 30 W 50 60 Hz 18000 Min 20 20 15m 20m LUXVISION is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss loss of property loss of revenues or profits loss of enjoyment or use costs of removal or installation or other consequential damages of whatsoever nature Some states do not allow the exclusion or limitation of incidental or consequential damages Accordingly the above limitation may not apply to you Every effort has been made to ensure the accuracy of this manual However LUXVISION makes no warranties with respect to the documentation and disclaims any implied warranties of merchantability and fitness for a particular purpose LUXVISION Inc shall not be liable for any errors or for incidental or consequential damages in connection with the furnishing performa
3. lectricity and may result in heating Content Function Introduction usas iade im oec pete et ka koe eer bad etse td eo zo eeu ce pede EROS Na Ga FUR CHOON PP UE INS TE SNO ee TEE 1 Function Introduction This machine is made mainly by aluminum alloy and convenient to use It s main feature is overcoming the disadvantage that common drill machines can not drill diagonally After fixing the lens adjust the lens holder to drill and mill accurately It s precision is much better than common drill machine Main technique parameter 2 Name of Parts Handle Depth locator Motor Angular turning wheel Drill chuck Drill bit Lens locator Switch Lens thickness adjuster Right and left adjustor Center locator Dial Fore and aft adjuster Right and left place dial 3 Function 1 It uses dual purpose motor driving Drill Bit directly which turning is controlled by switch The machine can drill straight hole right and left diagonal hole If drill straight hole replace the second hand of sawyer to the center 0 5 If drill diagonal hole make the second hand to an angle and fix the Lens Angles Site Screw Attach the drill bit loose drill hole with accessory drill bit lock make machine head to left put Drill Bit wanted to the hole turn Fore Screw and make drill bit close to dial Press handle keep 0 5mm distance between drill bit with dial and tighten the hole If depth of arill hole is not enough
4. nce or use of this manual or the examples herein The information in this document is subject to change without notice
Download Pdf Manuals
Related Search