Home

Mobile Computing

Contents

1. eren enne nnne nnns 55 EE EO EE UO CENE RETE DUC LEN VEEEIL EDEN EK DIE RIEN RIS RIS 56 Order NUMDOIS aei cri iieri Bir sess EPEEH MA ORix IDE ERE I EPI xU anoi ED DU EE FIRUM OO TIBUS EN sien 57 Additional MTOR AUIONN Pec 58 E WEEN 58 Appendix Declaration of conformity Certificate of compliance Subject to technical changes 04 2015 Mobile Computer MC 75Axex NI and MC 75A6 HEN Basic Type B7 A27 Safety Instructions 1 Basic Safety Instructions 1 1 Notes on this manual Please read carefully before commissioning the devices The user manual is a constituent part of the product It must be kept in the direct vicinity of the device and accessible at all times to installation operating and maintenance personnel It contains important notes safety instructions and test certificates which are necessary for perfect functioning when the devices are being operated and handled The user manual is written for all people who carry out handling commissioning operation and maintenance work on the product whereby the directives and standards applicable to areas with a gas or dust atmosphere 99 92 EC EN 60079 17 EN 60079 19 IEC 60079 17 IEC 60079 19 must be observed when doing such work Familiarity with and strict adherence to the safety instructions and warnings in this manual are essential for safe handling and commissioning Careful handling
2. Dispatch and Packaging d Disposal The Mobile Computers contain metallic and plastic parts and electronic components The statutory requirements for electrical scrap must be observed for disposal e g disposal by an authorised disposal company 10 Dispatch and Packaging Information ATTENTION Sensitive devices Damage may be caused by incorrect packaging gt Use original packaging for transport Subject to technical changes 04 2015 55 58 Mobile Computer MC 75Axex NI and MC 75A6 HEN Accessories Type B7 A27 11 Accessories Accessories for use in the Ex area B A270 0007 B A270 0008 Spare battery for MC 75A NI Lithium lonen 3 7 V 3600 mAh Spare battery for MC 75A NI Lithium lonen 3 7 V 4800 mAh Battery cover 03 9860 0082 03 9860 0083 03 9860 0072 03 9860 0081 ATEX Zone 2 and 22 ATEX Zone 2 and 22 Class II Ill Division 2 Class II Ill Division 2 Battery cover 1 5x Battery cover 2 5x Battery cover 1 5x Battery cover 2 5x SD card Micro SD cards 1 GB Micro SD cards 2 GB Micro SD cards 4 GB Micro SD cards 8 GB Protective display foil 17 C120 0007 17 C120 0008 17 28BE F006 000A 17 28BE F006 000B 5 pieces per package B7 A270 0016 Spare overlay for keypad green for Numeric 03 9829 0041 QWERTY 03 9829 0042 Accessories for use in the non Ex area Designation BARTEC Order no Single Slot USB Cradle Single slot USB cradle without po
3. 2 1 3 Owner s Managing Operator s Obligations sss 3 1 4 Safety MINS UY CUCING Nm 3 1 4 1 General Safety Instructions sese nnns 3 1 5 Safety Instructions for Operation nnns 3 aT MANENO Em 3 Fo Ee e NEE 4 EC N WROD INS EAE 4 1 394 COMMISSIONING REP 4 1 6 Ex Protection Type Certification and Standards seen 4 COME 1 0 m 4 1 8 Co applicable documents Set of documents 6 LE M 7610 e 0 2110 eR TET 7 2 POGUE CES CUNO HO EE 8 2 1 Blue 8 CC CANON EE 9 3 Ie BD EE 10 3 1 EXO SION ON OLE ele MNT 10 3 2 Other applicable standards 11 CSC E 12 3 3 1 Performance TOAUICS 5 uoces ivtun inae Rina ubten tuno enables nt seclysee bulaaddlschacebdepatsnsdcacadee 12 25 NV SICA El 12 See RR 13 3 3 4 eelere EE 13 3 3 5 Voice and data transmission Wireless LAN sse 14 3 3 6 Voice and data transmission Wireless WAN 14 3 3 7 Voice and data transmission Wireless HAN 14 QS MBA ee 15 3 3 9 Decodable barcode types ue 16 34A BNN c ere een eer ene ee ee eee eee eee eee eee ener 17 3 5 External interfaces Tm 17 3 6 ATEX DlOGUCTIADOINING m 18 UE doo Rm 19 4 Transpor ad SOGE e 20 4 1 PANSO 20 NON o EE P 20 5 CORITISSIORINU PE E EE EU ciavasitarisivihstneinuiseesb
4. ED e MEL P N 31 FUSION 01 Device s ALL Customer s ALL 6 7 5 Phone software G Is only possible with inserted SIM card Symbols In the start menu under gt Phone symbol gt Menu gt Options gt Phone Info tab Subject to technical changes 04 2015 Operation AY Wireless Status Gud au m Export FusionFublicAPLh I Wireless Fusion Copiright C B rmon a S000 0 OAR a P N 31 FUSION 01 Device s ALL Customerts ALL H Apolications Middleware Phone Q Y 8 11 Network L Phone Info 3 Sounds IMEI IMSI Manufacturer Model Name Firmware Audio RIL RHA USB Mux 357936040018404 262032234001739 SIEMENS HC25 REVISION 02 050 18 5B 04 01 01 06 09 0 40 01 01 00 00 01 03 02 02 49 58 Faults and Mobile Computer MC 75Axex NI and MC 75A6 HEN Troubleshooting Type B7 A27 l Faults and Troubleshooting A DANGER Risk of fatal injury in an explosive atmosphere P Examine defective devices and any accessories only outside the potentially explosive atmosphere Information on fault rectification is provided in the User Manual or the Integration Manual from ZEBRA httos www zebra com ZEBRA website for the MC 75Ax manuals for the non Ex protected version SUPPORT A DOWNLOADS Support Portal Select your product to find manuals software and FAQ 7 1 Resetting th
5. configure all wireless functions of the it SE device In the start menu under BARTEC Zyxcel gt Settings symbol On gt System symbol gt Connections symbol Phone amp On gt Wireless Manager symbol Wireless Manager G X7 uam 7 53 Activate deactivate wireless connection gt activate respective button gt All button Wireless connections depend on the configuration 6 7 Software versions Existing software versions and operating systems in the MC 75Ax NI The software is not relevant to the explosion protection of the device See the ZEBRA documentation for further information 6 7 1 OEM In the start menu under gt Settings symbol ULIID Part 1 nD195B2FFe0701D08 UUID Part2 1022030804081003 gt System Info symbol ESN 9250520800069 OS Version 05 02 21840 OEM Name MC75A gt System symbol gt System tab OEM Version 01 23 0005 O5 Version 05 02 21840 OEM Name MC75A OEM Version 01 23 0005 System HW Version Display Misc P Subject to technical changes 04 2015 47198 Operation Mobile Computer MC 75Axex NI and MC 75A6 amp HF NI Type B7 A27 6 7 2 Storage battery Symbols In the start menu under COHEN X M d 7 40 gt Settings symbol Copyrights Version gt Device ID gt System symbol Windows Mabilei 6 5 Professional CE OS 5 2 23137 Build 23137 5 3 9 gt About symbol E 2009 Microsoft Corporation
6. All rights reserved d Version tab This computer program is protected by U S and international copyright laws Windows Mobile amp 6 5 Professional Processor PXA32X 806MHz Memory 232 76 MB Expansion slot Mot i CE OS 5 2 23137 Build 2313 wl KR 2009 Microsoft Corporation All rights reserved The last part of the build number contains storage battery number 6 7 3 Bluetooth Symbols In the start menu under BT Information symbol BT Information Gi iC Qm 7 47 Local Device Information BD Address HCI Version 1 1 HCI Revision 21538 0x5422 Local Device Information LMP Version 2 1 BD Address 4083DE1BD811 Stack Type Microsoft _ HCI Version Manufacturer HCI Revision 21538 0x5422 Patch Version 1056 1058 LMP Version Radio State Leave Radio On Tel Stack Type Manufacturer Generate Local BD Address Patch Version 1056 1058 Barcode Radio State eave Radio On v The BTExplorer application is only available if the StoneStreet One Bluetooth Stack function is activated Further information is provided in the ZEBRA User Manual on Integration MC75A User Guide Subject to technical changes 48 58 04 2015 Mobile Computer MC 75Axe NI and MC 75A6 HEN Type B7 A2T 6 7 4 Fusion software Symbols In the start menu under gt Wireless Companion symbol gt Wireless Status symbol gt Point 7 Versions Wireless Fusion Copyright C
7. HF NI Safety Instructions Type B7 A2T 1 5 2 1 5 3 1 5 4 1 6 1 7 4 50 Inspection Repairs Commissioning Under IEC 60079 19 and EN 60079 17 the owner managing operator of electrical installations in hazardous areas is obliged to have these installations checked by a qualified electrician to ensure that they are in a proper condition Repairs on explosion protected operating equipment may be done only by authorised persons working in accordance with the latest developments in technology and using original spare parts The applicable regulations must be observed Before commissioning check that all components and documents are there Ex Protection Type Certification and Standards Warranty Markings specifying Ex protection and certification are put on the device For Ex protection markings see Chapter 3 Technical Data The Mobile Computers conform to Directive 94 9 EC for devices and protective systems for use to their intended purpose in potentially explosive areas ATEX Directive For the standards conformed to see Chapter 3 Technical Data WARNING It is not permissible to make any modifications or implement any conversions unless the manufacturer gives his approval in writing If components other than those specified are used protection against explosion can no longer be assured It cannot be guaranteed that parts procured from other suppliers have been designed and produced in confo
8. NICHT IN DEN STRAHL BLICKEN LASER KLASSE 2 LUMIERE LASER NF PAS REGARDER DANS LE FAISCEAU APPAREIL A LASER BE CLASBE 2 amp AXDsEROnm 1mW GALITION CLASS 3 LASER LIGHTWHEN OPEN AVOID DIRECT EYE FXPOSURF VORSICHT LASERLIGHT KLASSE JR WENN ABDECKUNG GE FFNET DIREKTE BESTRAHLUNG DER AUGEN VERMEID EN ATTENTION LUMI RE LASER ODE CLASSE 3R EN CAS DOUVERTURE EXPOSITION DANGEREUSE AU FAISCEALI Complies with 21CFR1040 10 and 1040 11 except for deviations pursuant to Laser Notice No 50 dated July 26 2001 and EN60825 1 1994 A1 2002 A2 2001 IEC60825 1 1993 A1 19897 A22001 DEUTSCH KLASSE 1 KLASSE 1 LASER PRODUKT KLASSE 2 LASERLICHT NICHT IN DEN LASERSTRAHL SEHEN KLASSE 2 LASER PRODUKT ENGLISH CLASS 1 CLASS 1 LASER PRODUCT CLASS2 LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT ITALIAN ITALIANO CLASSE 1 PRODOTTO AL LASER DI CLASSE 1 CLASSE 2 LUCE LASER NON FISSARE IL RAGGIOPRODOTTO AL LASER DI CLASSE 2 DUTCH NEDERLANDS KLASSE 1 KLASSE 1 LASERPRODUKT KLASSE 2 LASERLICHT NIET IN STRAAL STAREN KLASSE 2 LASERPRODUKT NORWEGIAN NORSK KLASSE 1 LASERPRODUKT KLASSE 1 KLASSE2 LASERLYS IKKE STIRR INN LYSSTRALEN LASERPRODUKT KLASSE 2 Subject to technical changes 04 2015 FRENCH FRANCAIS CLASSE 1 PRODUIT LASER DE CLASSE 1 CLASSE 2 LUMIERE LASER NE PAS REGARDER LE RAYON FIXEMENT PRODUIT LASER DE CLASSE 2 PORTUGUESE PORTUGUES CLASSE 1 PRODUTO LASER DA CLASSE
9. U 1 D Standard Range Scan Engine and Camera Y MD J2D lmagerEngneand Camera z Keyboard Numeric sa E R QWERTY Engish Et Mobile Computer MC 75A6 NI with GSM HSDPA WWAN option B7 A27 6 lC S W lIRA9WO00 Explosion Protection it UL Ghssi lMDivsin2 2 ATEX Zone2andZone22 3 Data Acquisition l D Standard Range Scan Engine K D 2D Imager Engine U D Standard Range Scan Engine and Camera Y D 2D Imager Engine and Camera E Keyboard u D Numeric R QWERTY English o Mobile Computer MC 75A6 NI with EVDO Verizon option B7 A27 8 FS W RAQWO O Explosion Protection JuL gt Class Il II Division 2 I 2 ATEX Zone 2 and Zone 22 3 DataAcquisiion 1 D Standard Range Scan Engine 1 D 2D Imager Engine uU 1 D Standard Range Scan Engine and Camera KE 1 D 2D Imager Engine and Camera D Keyboard Numeric RI QWERTY English o Subject to technical changes 04 2015 97 98 l Mobile Computer MC 75Axex NI and MC 75A6 HF NI Additional Information Type B7 A27 13 Additional Information 13 1 Links http www bartec group com BARTEC website https www zebra com ZEBRA Homepage The ZEBRA page for the MC75Ax User Manuals and software of the non explosion protected version gt SUPPORT A DOWNLOADS Support Portal Select your product to find manuals software and FAQ The Z
10. 2 Only charge the battery outside the potentially explosive atmosphere 3 Only use the battery for the purpose listed in this User Manual Is only suitable for the Mobile Computer MC 75Ax NI Type B7 A2T 4 There is a danger of burning if used incorrectly Do not expose the battery to temperatures of more than 50 C 122 F 5 Battery acid may escape from the cells and cause burning in the case of damage 6 Defective batteries must be disposed of immediately whereby the provisions on battery disposal applicable in the respective region must be observed 7 The battery may explode if it catches fire 8 Do not short circuit the battery Accessories 1 Only install or replace accessories outside the potentially explosive atmosphere 2 Use accessories exclusively which have been tested or certified by BARTEC for this purpose 3 The end user can replace the Micro SD card SIM card or SAM card only for MC 75A6 HE NI himself 4 The end user cannot replace the keypad himself The devices are adjusted to the selected keypad version Subject to technical changes 04 2015 Mobile Computer MC 75Axex NI and MC 75A6 HEN Type B7 A27 Commissioning 5 2 First steps Unpack the Mobile Computer Insert the battery into the Mobile Computer Charge the battery on the cradle AAA A Switch on the Mobile Computer Optional Charge the battery in a charger Inserta Micro SD card Insert a SIM
11. availability in corporate processes A keypad in different versions is available for manual data entry Further options for the entry of data are provided by the integrated 1D or 1D 2D Scan Engine for the entry of barcodes A 3 2 megapixel camera and or a RFID HF Reader 13 56 MHz are available for data entry as an option Thanks to the ergonomically positioned scan trigger on the MC 75Ax NI data may be easily entered with one hand Several technologies are available for data communication with other systems and corporate areas Wireless WAN WWAN Wireless LAN WLAN Wireless PAN WPAN Bluetooth rDA connection Thanks to the integrated modules in the device smooth voice and data transmission is possible with simple integration into the corporate network Further advantages of use are its heavy duty design easy to read 3 5 VGA colour display with Touch technology and a high performance lithium ion battery In the MC 75Axex NI the PXA320 processor with 806 MHz ensures the fast speed of processes and the operating system Microsoft Windows Mobile 6 5 in connection with the Enterprise Mobility Developer Kits EMDK from ZEBRA ensures simple application development There is an integrated 256 MB RAM in the device for storage and 1 GB Flash to store user defined applications and data BARTEC offers Micro SD memory cards for larger applications and data volumes Subject to technical changes 04 2015 Mobil
12. 1 CLASSE 2 LUZ DE LASER NAO FIXAR O RAIO LUMINOSO PRODUTO LASER DA CLASSE 2 DANISH DANSK KLASSE 1 KLASSE 1 LASERPRODUKT KLASSE 2 LASERLYF SE IKKE IND STRALEN KLASSE 2 LASERPRODUKT FINNISH SUOMI LUOKKA 1 LUOKKA 1 LASERTUOTE LUOKKA 2 LASERVALO ALA TUIJOTA SADETTA LUOKKA 2 LASERTUOTE 19 58 Transport and Storage 4 4 1 4 2 20 58 Mobile Computer MC 75Axex NI and MC 75A6 HF NI Type B7 A27 Transport and Storage Transport D Storage Report any transport damage or incomplete deliveries immediately after receipt in writing to the forwarding company and BARTEC GmbH Any damage caused through incorrect storage shall not be covered by the warranty provisions of BARTEC GmbH ATTENTION Property damage through incorrect storage gt Observe storage temperatures gt Keep humidity away from the Mobile Computers Additional information on the batteries The batteries of BARTEC Type B A2Z0 are developed and manufactured in accordance with the highest industrial standards The operating time or storage period of a battery is restricted however The actual life of a battery is influenced by different factors e g hot cold rough operating environment and falling from a great height If a battery is kept longer than six months the performance may be impaired on a permanent basis Keep the batteries in a dry cool place For longer periods of storage remove the batteries
13. 1 EN 301 489 3 V1 4 1 3GPP TS 51 010 1 v 4 8 0 GSM 11 10 1 EN 50360 2001 Max average 10g SAR 0 992 W Kg Kennzeichnung Marking Marquage 9 II 3G Ex ic IIC T6 Gc II 3D Ex ic IIIC T80 C Dc 10 C lt Ta lt 50 C Verfahren der Procedure of Proc dure de internen Fertigungs internal control of contr le interne de kontrolle Production fabrication EPS 12 ATEX 1 481X Bad Mergentheim den 18 04 2013 Am ppa wald Warmuth Geschaftsleitung General Manager Page 2 of 2 Mobile Computer MC 75Axex NI and MC 75A6 HEN Certificate of Compliance Type B7 A27 Certificate of Comp Strate Number 20110321 E32155 Report Reference 321557 2010 December 01 Issue Date 2014 March 21 U Underwriters L Laboratories i Issued to BARTEC GMBH MAX EYTH STRASSE 16 97980 BAD MERGENTHEIM GERMANY This is fo ertifi that INFORMATION TECHNOLOGY EQUIPM ENT FOR representative samples OI USE IN HAZA RDOUS LOCATIONS See Addendum Page Have been investigated by Underwriters Laboratories ni UL or any authorized licensee of UL in accordance with the Standard s indicated on this Certificate Standard s for Safety See Addendum Page 2 Lddlitional Information See UL On Line Certification Directory at www UL com for additional information Only those products bearing the UL Listing Mark for the US and Canada should be considered as being covered by UL s Listing and Follow Up Service meeting th
14. 1040 11 with the exception of the deviations set out in the Laser Notice No 50 dated 24 June 2007 and EN 60825 1 2007 and IEC 60825 1 Ed 2 The classification of the laser device is stated on a plate attached to the device Laser devices of Class 2 work with a visible low volt light emitting diode As for every bright light source for example the sun you should not look directly into the light beam There is no information about the hazards of being briefly exposed to the laser light of a laser scanner of Class 2 The use of control elements adjustments or the application of procedures which do not comply with the instructions described here may lead to hazardous exposure to beams 6 4 3 Restrictions to wireless devices D Subject to technical changes 04 2015 The use of wireless devices is possibly forbidden or restricted This applies primarily on board aircraft in hospitals in the vicinity of explosive substances or under other hazardous conditions If you are not sure which regulations apply to the use of the device ask permission before switching it on Country specific roaming This device has the International Roaming function IEEE802 11d which ensures that the device is used on the channels prescribed for the respective country Ad hoc operation The ad hoc operation is restricted to the channels 36 48 5150 5250 MHz The use of this bandwidth is restricted to indoor areas use outdoors is not permitted 41 58
15. BARTEC or request them when placing the order Changes to the document BARTEC reserves the right to alter the contents of this document without notice No guarantee is given for the correctness of the information In case of doubt the German safety instructions shall apply because it is not possible to rule out errors in translation or in printing In the event of a legal dispute the General Terms and Conditions of the BARTEC group shall apply in addition The respective up to date versions of data sheets manuals certificates EC Declaration of Conformity may be downloaded at www bartec group com under products and solutions in the area Automatic Technology or ordered directly from BARTEC GmbH Handling the Product The product described in these user manual has been tested and left the factory in perfect condition as regards meeting safety requirements To maintain this condition and ensure that this product operates perfectly and safely it may be used only in the manner described by the manufacturer Appropriate transportation suitable storage and careful operation are also essential for the perfect and safe operation of this product The Mobile Computer must be installed properly and securely if it is to work perfectly and correctly The safe and perfect mounting of the Mobile Computer is a precondition for faultless and correct operation Use in Accordance with the Intended Purpose Exclusive Purpose Improper Use The Mob
16. Electrical Equipment for Use in Class I and II Division 2 and Class III Divisions and 2 Hazardous Classified Locations ANSI ISA 12 12 01 2007 Edition 1 Intrinsically Safe and Non incendive Equipment for Use in Hazardous Locations CAN CSA C22 2 NO 157 92 Edition 1 William R Carney Director North American Certification Programs nderwriters aboratories Inc Any information and documentation involving UL Mark services are provided on behalf of Underwriters Laboratories nc UL or amy authorized licemee of Ul For questions please contaci a local Ul Customer Service Representasie si http w ol on global eng pages corporate contecios BARTEC protects people and the environment by the safety of components s y ste mos and plants BARTEC GmbH Germany Max Eyth StraDe 16 97980 Bad Mergentheim Phone 49 7931 597 0 Fax 49 7931 597 119 BARTEC info bartec de www bartec group com A275 7D0002 Revision A 04 2015 Automation Technology 305169 EN Pi
17. Operation Mobile Computer MC 75Axex NI and MC 75A6 HF NI j Type B7 A27 FCC requirements to protect against high frequency interference This device has been tested and satisfies the limit values for a digital device of Class B according to Part 15 of the FCC Guideline These limit values were stipulated to guarantee appropriate protection against disturbances if the device is used in residential areas The device generates and uses radio frequency energy and may emit this energy This can have a disturbing effect on other radio frequencies if the device is not connected and used in accordance with the operating instructions A guarantee that no interference will arise for a certain installation cannot be given If the device causes G interference to the radio or TV reception which can be recognised by switching the device on and off the interference should be eliminated by one or several of the following measures Re alignment or moving of the receiving antenna Enlarging the distance between device and receiver Connecting the device to a different socket than the one to which the receiver is connected Advice from the dealer or a radio television technician Radio transmission devices Part 15 This device satisfies the requirements of Part 15 of the FCC Guidelines The operation of the device is based on the following two conditions The device may not cause any damaging interference The devic
18. RFID anmtenna from the reverse side of the enclosure and remove Open the cover of the SAM card Insert the SAM card into the opening with the contacts facing down Close the cover of the SAM card Click in the RFID antenna on the reverse side of the enclosure 0 Tighten the four screws using a torx T5 screwdriver 1 Perform a warm boot 2 a E E Subject to technical changes 32 58 04 2015 Mobile Computer MC 75Axex NI and MC 75A6 HEN C Type B7 A27 g 5 4 9 Remove SAM card MC 75A6 HF NI only Work steps 1 Only remove the SAM card outside the potentially explosive atmosphere 2 Press the red ON OFF button to switch off the Mobile Computer 3 Remove the four screws of the cover plate RFID antenna using a torx T5 screwdriver 4 Lift RFID antenna from the reverse side of the enclosure and remove 5 Open the cover of the SAM card and remove the SAM card 6 Close the cover of the SAM card 7 Click in the RFID antenna on the reverse side of the enclosure 8 Tighten the four screws using a torx T5 screwdriver 9 Perform warm boot Subject to technical changes 04 2015 33 58 A Mobile Computer MC 75Axex NI and MC 75A6 HF NI Commissioning Type B7 A27 9 9 9 9 1 9 9 2 34 58 Connection to a PC Active Sync D The MC 75Ax NI series is supplied with the Microsoft WM 6 5 or higher operating system Microsoft provides software free of charge for connect
19. a hazardous area P The general statutory regulations or directives relating to safety at work accident prevention and environmental protection legislation must be observed e g the German industrial health and safety ordinance BetrSichV or the applicable national ordinances P In view ofthe risk of dangerous electrostatic charging wear appropriate clothing and footwear P Avoid the influence of heat that is higher or lower than the specified temperature range P Protect the device from external influences Do not expose the device to any caustic aggressive liquids vapours or mist In the event of malfunctioning or damage to the enclosure take the device out of the potentially explosive area immediately and bring it to a safe place 1 5 Safety Instructions for Operation 1 5 1 Maintenance Subject to technical changes 04 2015 For electrical systems the relevant installation and operating regulations must be complied with e g Directive 99 92 EC Directive 94 9 EC and the national applicable ordinances EN 60079 14 and the DIN VDE 0100 series The disposal of this equipment must comply with the national regulations on the disposal of waste Regular servicing is not necessary if the equipment is operated correctly in accordance with the installation instructions and environmental conditions In this context please refer to Chapter Maintenance Inspection Repair 3 58 Basic Mobile Computer MC 75Axex NI and MC 75A6
20. card MC75Ax HF NI only Remove replace screen protector G Further information is also provided by the ZEBRA documentation 24 58 Subject to technical changes 04 2015 Mobile Computer MC 75Axex NI and MC 75A6 HEN C Type B7 A27 g 5 4 1 Insert battery Depending on configuration the MC 75Ax NI is supplied with a 3600 mAh or 4800 mAh battery Charge time Battery 1 5x B A2Z0 0007 Less than 8 hours Lithium ion battery 3 7 V 3800 mAh Accompanying battery cover ATEX 03 9860 0082 UL 03 9860 0072 Battery 2 5x B A2Z0 0008 Less than 8 hours Lithium ion battery 3 7 V 4800 mAh Accompanying battery cover ATEX 03 9860 0083 UL 03 9860 0081 Work steps 1 Only charge install or replace the battery outside the potentially explosive atmosphere 2 Use batteries exclusively which have been tested or certified by BARTEC for this purpose 3 Insert the battery top first into the battery compartment on the rear side of the Mobile Computers MC 75Ax NI 4 Ensure that the charge contacts of the battery agree with the charge contacts in the battery compartment 9 Press the battery down into the battery compartment until the battery release latch snaps into place 6 With the battery cover latches open insert the cover bottom first then press down on the top of the cover T Close the battery cover latches on either side of the battery cover 8 Feed the handstrap through the slot provided
21. card only possible with MC 75A6 NI Insert a SAM card only possible with MC75A6 HF NI The individual steps are explained on the following pages 5 3 Structure Scan Decode Charging Battery Radio LED Status LED Status LED Ba RN N ke Receiver__ Power Button Touch Screen with Z OR Keypad Protective Overlay OQ XON QWERTY Keypad Shown Microphone Handstrap n Battery Cover IBN sos e y Handstrap Slot NC z SC uu AE E Battery Cover Latch Headset Jack DR 2 P F v Pii i of e p m a W 2 K e Ce Ba si A SC Ch s ar 4 d e OK E if SC ee ey T E n d g pt d RK A a L E e F a p a Lm LAY 2 IrDA Window ua E Memory Card Cover li D d P d P EC de Speaker E OX E Ir Gef Acton Button an Scan Acction Button Imager Configuration Shown Stylus Tether Point Subject to technical changes 04 2015 23 58 SP Mobile Computer MC 75Axex NI and MC 75A6 HF NI Commissioning Type B7 A27 9 4 Handling accessories A DANGER Non certified accessories endanger explosion protection Risk of fatal injury in an explosive atmosphere gt Only use original accessories from BARTEC ZEBRA Only permitted outside the potentially explosive atmosphere gt Vv ww vw Charge battery Insert replace SIM card MC75A69 NI only Insert replace Micro SD card Insert replace SAM
22. collections of fluid and rub with smooth cloths Cleaning agent for optical devices Battery contacts Remove the battery from the device to clean Soak the cotton swabs in an alcohol solution to remove all grease and dirt deposits on the contacts Repeat cleaning several times Before replacing the battery the contacts must be completely dry and no fluff should remain Cradle contacts To clean the cradle contacts remove the battery from the device and close the battery compartment Soak the cotton swabs in an alcohol solution to remove all grease and dirt deposits on the contacts Repeat cleaning several times Before the device is replaced in the cradle the cradle contacts must be completely dry and no fluff should remain Charger plug in connector Separate the charger from the power supply to clean the charger contacts Soak the Q Tips in an alcohol solution to remove all grease and dirt deposits on the contacts Repeat cleaning several times Before the charger is reconnected to the power supply the contacts must be completely dry and no fluff should remain Subject to technical changes 04 2015 37 98 Operation Mobile Computer MC 75Axex NI and MC 75A6 HF NI j Type B7 A27 6 4 Operation recommendations and requirements 6 4 1 Basic safety and health protection requirements Consult your local health and safety officer to ensure that you are acquainted with the sa
23. for it and pull the handstrap fastener downwards 9 Secure the handstrap Battery Handstrap Slot Battery Cover Latch Release Latch Battery Cover Subject to technical changes 04 2015 25 58 SP Mobile Computer MC 75Axex NI and MC 75A6 HF NI Commissioning Type B7 A27 5 4 2 Charge battery 1 Place the Mobile Computer with battery inserted into the cradle 2 Connect the charge cable of the cradle with a suitable power ssource 3 The charge process starts automatically and is shown by an orange flashing light at the LED The battery charges completely in less than 8 hours 4 The charge process of the battery is completed once the LED permanently lights up orange Single Slot USB Cradle Set without USB cable and appliance coupler EE ae 03 9015 0014 without applicance coupler Charging Battery Status LED The charge process of MC 75Ax NI is activated and deactivated at short time intervals to keep battery temperature within the admissible range The MC 75Ax NI shows by LED when the charge process has been deactivated due to high temperature G Further information is provided by the ZEBRA documentation Subject to technical changes 26 58 04 2015 Mobile Computer MC 75Axex NI and MC 75A6 HEN Type B7 A27 g Charging Battery Status LED LED charge status Scan Radio Status Slow orange flashing light UTE Decode LED 1 flash signal every 2 sec The MC 75Ax N
24. months This warranty covers all parts of the delivery and shall be restricted to the free replacement or repair of the defective parts in our Bad Mergentheim factory For this purpose any packaging supplied must be kept where possible In the case of warranty the goods must be returned to us aft