M-Flex user manual
Contents
1. a aasan 12 SOLIS ossa y RRR R kay hx wor ah hx RR RR i n 15 Care and Maintenance eee 15 Troubleshooting si eoa x x e e e cara 16 Specifications is 9 6 R N 9 vee e n ne R R R wae dads 17 Me Flex 12 Specifications llli 17 Me Flex 15 Specifications llle 18 MeFlex Sub Specifications llle 19 TC Electronic Software License Agreement 21 INTRODUCTION Warning Thank you for choosing the MeFlex speaker system The MeFlex series is the next generation of compact lightweight speakers and offers a vast variety of innovative functions and features SAFETY INFORMATION Read this manual before powering or installing the fixture follow the safety precautions listed below and observe all warnings in this manual and on the fixture If you have questions about how to operate the fixture safely please contact your Mach dealer or call the Martin Professional 24 hour service hotline at 45 70 200 201 You are cautioned that any change or modifications not expressly approved in this manual could void your authority to operate this equipment To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Please heed all warnings and follow all instructions in this user manual when using the MeFlex products Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators hea2. This to avoid the risk of short circuiting the amplifier and processor PCB due to condense water The MeFlex cabinets can be used in short term out door applications but have not been designed for long term outdoor installations Clean the cabinets with a general purpose household detergent Grease or marking tape residue can be removed with alcohol or mineral spirits Protective speaker covers are available for the MeFlex models and we strongly rec ommend these if the speakers are frequently transported Service 15 TROUBLESHOOTING Problem Remedy Make sure that all XLR cables are wired according to the AES standards Hot Pin2 Cold Pin3 No sound O Shield ground Pin1 Make sure that the signal is strong enough A weak signal may result in the unit shutting down if the stand by function is enabled No sound when microphone is connected to mic input The microphone requires phantom power Switch to a dynamic microphone Distorted sound but peak indicator does not come on Mixer or other sources is overdriven clipping Turn down the signal from the source Low input signal Ensure that the input cables are balanced Feedback when microphone is turned up Microphones have very different characteristics depending on which application they are designed for Make sure that the microphone is a vocal microphone with a Cardioid unidirectional characteristic Shure offer good help to
3. choosing the right microphone Check http Awww shure com microphones microphone_help asp Turn Microphone away from the speaker Reduce bass and treble EQ Table 1 Troubleshooting 16 Troubleshooting SPECIFICATIONS MeFlex 12 Specifications SYSTEM PERFORMANCE Max long term SPL calculated Max peak SPL calculated Frequency range 10dB Dispersion 6dB Auto stand by 22 00 0000 Mix output impedance LF EQ Shelving e HF EQ Shelving 00 HF TRANSDUCER Power rating IEC 268 Power rating peak Sensitivity resse Reha chase Shad Bes LF TRANSDUCER AMPLIFIER LF output continuous RMS HF output continuous RMS LINE INPUT Input sensitivity pad on Input sensitivity pad off Specifications Nube Board mee Pale Se Madey bio epa 12 min DEM 10 dB 100 Hz d AN eo e ec dae 10 dB 10 kHz deii ole ini Za 50W heparina rada Dread Balanced SS A da P ded 27 K ohm eum E met E er Ss 21 to 14 dB RIED Gee E puc aerate as e ode iod 5 to 40 dB 17 ELECTRICAL AC input US modelo iess ries eee es ene aa EE RE n ER OPUS 110 V 60 Hz AC input EU model 1r Ad mre duly Sh ew eee eed oe SMa PS 230 V 50 Hz Power consumption peak s c ARC ga EA AT EET Kana E Va e eens 420 W Power consumption averag
4. W SENS CEDE 101 dB AMPLIFIER LF output continuous RMS e K nee nee 350 W HF output continuous RMS 002 0000 TOW LINE INPUT DD O A AA AA ERES Balanced Impedancia ERE 27 K ohm Line 1 82 sensitivity varios ai o lao to0dB Specifications MICROPHONE INPUT DP Adages da eda ae teens RA Rae ida Balanced Impedarce PATO ni dork eres nett ER SA ie e RT aes 3 5 K ohm Impedarice pad Off serias regara eoe eres vU UE ae GE e ues 4 K ohm Input sensitivity padon 0 00 NT N R C S R R R R RTE E TRR 21 to 14 dB Input sensitivity pad off 0 eee 5 to 40 dB ELECTRICAL AC input US model tin a ee ae aso R ae CERE 110 V 60 Hz AC input EU model eee eee e 230 V 50 Hz Power consumption peak aag R ests le pe ee iis a e ai 510 W Power consumption average lesse s 185 W Power consumption no signal 000 00 53 W Power consumption Standby 2 00 cee eee eee nee eee eens 5 W Maximum current consumption 2 23 A 230 V 4 46 A O 115 V PHYSICAL DIMENSIONS ees kone AAA ER eg 67 x 48 x 40 cm 26 x 19 x 16 in A NR e ER SENE E 25 kg 55 Ibs Flying attachment 0 0 0 eee eee eee ee 4 points for M6 threaded hardware ACCESSORIES Speaker cover Flying bracket for cluster and array configuration MeFlex Sub Specifications SYSTEM PERFORMANCE Max long term SPL calculated 000 000 123 dB Max peak SPL calculated y sel acne
5. and to be performed entirely within Denmark between Danish residents If for any reason a court of competent jurisdiction finds any provision of this License or portion thereof to be unenforceable that provision of the License shall be enforced to the maximum extent permissible so as to effect the intent of the parties and the remainder of this License shall continue in full force and effect 8 Complete Agreement This License constitutes the entire agreement between the parties with respect to the use of the Software and the related documentation and supersedes all prior contemporaneous understandings or agreements written or oral regarding such subject matter No amendment to or modification of this License will be binding unless in writing and signed by a duly authorized representative of TC Electronic If you have any questions concerning this Agreement or TC Electronic please write to TC ELECTRONIC Sindalsvej 34 8240 Risskov Denmark E mail info tcelectronic com TC Electronic Software License Agreement TC Electronic Software License Agreement 23 v ac URL http www mach audio com
6. ean BE ia Sh gee eee LAM Ogee eas 129 dB Frequency range 10d Bs rer ia la S 45 250 Hz A tostand sc E EA bed ea Ds 1 hour TRANSDUCER DE e Bethe eee gg EY eet robbed ad r 15 woofer with 3 voice coil Power rating TEC 268 caia not cee ee uer POWER e dte ed BA 320 W Power rating peak oc cea sae RIP e weeks ta he ag ET E RER A che 1280 W NI MIA MP DM LP 97 dB AMPLIFIER LF output continuous RMS s 350W High pass filter a ii ee NU ROSE EA e 115 Hz 24 dB LR LINE INPUT E a ed ie tidie meus pa a Gg he NN Balanced A Ug esL E td elei G Pea TAY EAA EK dece eU ue 22 K ohm Specifications 19 20 ELECTRICAL AC input US modelo iess anie eee es ee ne aa whe Bd n ER es 110 V 60 Hz AC input EU model 1r Ad ee hada ioe Sh ew Re ead ee Fe e dis PS 230 V 50 Hz Power consumption peak 0 000 000 510 W Power consumption average n neea e rA a eee eee ee 185 W Power consumption no signal 0 cee eee eee ee 53 W Power consumption standby 0 2000000nn eee eee 5 W Maximum current consumption 2 23 A 230 V 4 46 A 115 V PHYSICAL Dimensions cuv vr RR Oh US Eas 67 x 48 x 40 cm 26 x 19 x 16 in ACCESSORIES Speaker cover Flying bracket for cluster and array configuration Specifications TC ELECTRONIC SOFTWARE LICENSE AGREEMENT Software Package for the MeFlex 12 15 sub hereafter referred to as the Product PLEASE READ THIS LICENSE CAREFULLY BEFORE USING THE S
7. in the DSP offers excellent protection and reliability with nearly unlimited limiting capabilities especially when compared to a typical analogue limiter with a modest 20 25 dB limiting Apart from working as a limiter the DSP also control crossover slopes EQ points high pass filter and delay But still acoustical problems have been addressed with acoustic measures At Mach we recognizes that not even the most powerful processor can correct even basic acoustic challenges In order to get the most out of a DSP the foundation must always be an acoustically well designed speaker system For this reason all drive units have been customized to the MeFlex series and devel oped with emphasis on ultra flat frequency response highly controlled dispersion patterns and very low distortion In addition to this power compression has been kept at an absolute minimum in all models in the MeFlex series and the internal cabinet design has reduced resonances to a minimum Introduction 5 APPLICATION MeFlex 12 The MeFlex 12 is a full range cabinet designed around a co axial 12 woofer and 1 compression driver The co axial design makes the MeFlex 12 an ultra com pact and lightweight speaker which can be used for a large verity of applications Another advantage of the co axial design is the uniform dispersion pattern of 110 x UE lt Mic input 110 degrees enabling the MeFlex 12 to be flown hori zontally or vertically The cov
8. ESULTS OF THE USE OF THE SOFTWARE OR RELATED DOCUMENTATION IN TERMS OF THEIR CORRECTNESS ACCURACY RELIABILITY OR OTHERWISE NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY TC ELECTRONIC OR AN TC ELECTRONIC AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY SHOULD THE SOFTWARE PROVE DEFECTIVE YOU AND NOT TC ELECTRONIC OR A TC ELECTRONIC AUTHORIZED REPRESENTATIVE ASSUME THE JURISDICTIONS SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU 6 Limitation of Liability UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE SHALL TC ELECTRONIC BE LIABLE FOR ANY INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE USE OR INABILITY TO USE THE SOFTWARE OR RELATED DOCUMENTATION EVEN IF TC ELECTRONIC OR A TC ELECTRONIC AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU In no event shall TC Electronic s total liability to you for all damages losses and causes of action whether in contract tort including negligence or otherwise exceed the amount paid by you for the Software 7 Governing Law and Severability This License shall be governed by and construed in accordance with the laws of Denmark as applied to agreements entered into
9. M Flex 12 M Flex 15 M Flex S user manual All rights reserved No part of this manual may be reproduced in any form or by any means with out permission in writing from Mach Audio Ltd P N 35020006 Rev F Introduction a a aa ah a Ar a grad 4 Safety information 00 eee 4 Design concept cria a A A 5 Application rca coo cd edere R R Te KRN RER n 6 Mel e Lb Mrd ME 6 MeFlex a tex CE ee ve Re EM BEA Ss 6 Mel S eun ev ad cee dax RR a E EE a 7 Rear panel interfaces eleelllle 8 Power section si nisus liiprteiennsti ek4 GM hele a BA 8 Power input ues uk dr a bake bene Eden h rs 8 Power SWItCh oc cd er EP RU RH RE EPOR KA E 8 LED indicators lt 31 ie be Are MER STR dae E iux 8 INPUPSOCHON a bebe bya ved bee he eek UE Ri Pg dud ee od 9 Microphone input 1 2 T Z RA R KL Te a Ih 9 Mic line selector pane aa dTe KT T KR a a te eee 9 Microphone links 5 besitos eee aie i Tara da ne haft us 9 Line input 1 amp 2 1 222 et aye a ea he vee bel ewes 9 Output Section wir ranas ER ER RES 10 Master volume 0 R K N rne 10 MDCOUE Sin ara AAA RATE 10 BASS aaa and Hale e Mak eee he dal ae Bie Miu e 10 o deed teats beat me et ng sk wade ed 10 Mounting the speakers 0000 ee eee eee eee 11 Elyirig optiors soos SLE LPLLDEME AL IIIS e 11 Tripod Mounting sic puer aia be debe ede E ee 11 Stand by TUMOR E ERE E 12 Enabling or disabling the stand by function
10. NG OR DISABLING THE STAND BY FUNCTION The stand by function is enabled by removing a jumper from a printed circuit board PCB inside the fixture To access the PCB Using a Torx 20 screwdriver remove the 8 screws that hold the woofer cover in place Stand by function 2 Remove the woofer cover 2 Using a Phillips screwdriver remove the woofer from the speaker casing Stand by function 13 B The jumper is located at the lower right corner of the PCB To enable the stand by function remove the jumper at position JP1 if present To disable the stand by function add a jumper P N 05120701 az00TOETO 810 LTO 019 TM TL Uo Ld El k j Jumper 6 Replace the woofer and the woofer cover before applying power to the unit 14 Stand by function SERVICE Refer all service other than that described here to qualified service personnel CARE AND MAINTENANCE The MeFlex speakers have been designed for mobile use and will when used with common sense care provide flawless performance for many years However we recommend that the following points are noted If the speakers have been subjected to very low temperatures it is advisable to allow for a one hour warm up period before operating them at full output
11. Note When the limiter LED comes on now and then the speaker is approaching the maximum output The indicator comes on 2 dB before limiting sets in and occasional flickering of the LED is fully normal It does not mean that the speaker is overloaded However pushing the volume up until the LED lights up almost continuously might result in clipping the input and can in extreme situations cause damage to the amplifier or drive units In this case either reduce output level from the source reduce bass or treble boost on the EQ or reduce master volume or microphone gain See also Stand by function on page 12 INPUT SECTION Microphone input The microphone input accepts a standard XLR connector Apart from accepting microphones the input can be switched to accept line signals by pressing the Mic line selector Mic line selector Pressing the Mic Line selector button enables the microphone input to be used as a line input The Mic line selector control the sensitivity of the input as follows Mic 5 dB to 40 dB Line PAD 20 dB to 15 dB Signal Input Volume is controlled by the Mic gain control Microphone link This XLR output enables you to link the microphone signal to other MeFlex speak ers It is a passive thru link so the output signal of the plug is similar to the input sig nal Line input 1 amp 2 Note Line 1 and 2 feature a 4 Jack plug which accepts a balanced or unbalanced line level sig
12. OFTWARE IN THE PRODUCT BY PROCEEDING AND USING THE SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENSE PROMPTLY RETURN THE UNUSED PRODUCT TO THE PLACE WHERE YOU OBTAINED IT AND YOUR MONEY WILL BE REFUNDED 1 License TC Electronic grants to you the right to use this copy of TC Electronic software and the related documentation the Software in the Product You own the media on which the Software is recorded but TC Electronic retains title to the Software and related documentation including copies regardless of form or media and to all copyrights therein You may not reproduce the Software or the media holding the copy protection Authorization in any shape or form 2 Transfer of Rights You may transfer all your license rights in the Software the related documentation and a copy of this License to another party provided the other party reads and agrees to accept the terms and conditions of this license 3 Restrictions The Software contains copyrighted material trade secrets and other proprietary material of TC Electronic and or its partners In order to protect this and except as permitted by applicable legislation you may not de compile reverse engineer disassemble copy decode or otherwise reduce the Software to a human perceivable form You may not modify adapt network rent lease loan distribute or create derivative works based upon the Soft
13. cept of a lightweight design in the entire MeFlex series is maintained and an active crossover with hi output link option ensures optimum integration of MeFlex S with the rest of your MeFlex speakers Introduction REAR PANEL INTERFACES This section describes the rear panel interfaces POWER SECTION Power input The enclosed power cable features a Neutric PowerCon plug The PowerCon plug is locked into the socket thus eliminating the risk of accidentally having the main power connector pulled out of the socket Note Remember to bring the cord at all times as it is a custom component often not yet found in normal electrical components Connect the power Plug in the power cord to an AC socket with a voltage which correspond to the amplifier current 110 or 220 volt depending on model refer to the MeFlex label on the rear panel Power switch Before turning on the MeFlex speaker make sure that all sources such as mixer musical instruments or CD players have been turned on and the input gain controls have been turned down When shutting down the system reverse the process i e turn off the speaker and then all external sources LED indicators Blue AC power on Green Receiving signal Red Limiter active Note that on the front of the unit there is an additional Blue LED that turns off when the unit is in standby waiting for a signal Red LED that indicates when the limiter is active 8 Rear panel interfaces
14. e 1 com pression driver incorporated a very lightweight diaphragm and with 107 dB sensitivity the unit is more effi cient than many 2 drivers But it still has the advantage of a very wide frequency response and runs flat to 19 kHz It is mounted behind a 90 x 40 constant directivity horn with excellent coverage control For stronger reproduction of frequencies from 100 Hz and down the MeFlex S is designed to deliver the punchy kick from a bass drum or a hard low frequency bass line At the same time it contributes to an overall increase of dynamics and sound pressure of the MeFlex top boxes The 15 unit in MeFlex S is a powerful construction that features a lightweight chassis The chassis is very open and enables excellent coupling of the diaphragm to the air in the cabinet It incorporates venting below the spider to reduce power compression and improve clarity A special SoftRoll design is featured in the spider This design allows for more than 18mm excursion and extended sub bass output The 39 mm voice coil former is made of aluminium and ensures excellent heat dissipation and very low power com pression A strong Kapton voice coil former ensures excellent mechanical stability Digi LN Vs LINE venit Mixer MeFlex as separate microphone monitor Mic in U Microphone MeFlex 15 connected via MeFlex S high pass out High pass out Line in Mixer tally powered the con
15. e s saae e rA ee eee 145 W Power consumption no signal 0 0 eee ee 53 W Power consumption standby 0 eee eee 5 W Maximum current consumpti0on 0 0 000 2 23 A 0 230 V 4 46 A 115 V PHYSICAL Dimensions x 005 N S ER Neal URP S 50 x 39 x 32 cm 19 7 x 15 4 x 12 6 in Weight MP 15 kg 33 lbs Flying attachment 0 0 ee eee eee eee 4 points for M6 threaded hardware ACCESSORIES Speaker cover Flying bracket for cluster and array configuration MeFlex 15 Specifications 18 SYSTEM PERFORMANCE Max long term SPL calculated 0 0000 00 126 dB Max peak SPL calculated cuore boob bee eee Shek ee es 132 dB Frequency range 10dB 0 eee 49 Hz 20 kHz Dispersion 6 dB esere R REA E RR R RT tenet KRE N ESS 90 x 40 degrees Auto Standby ito sidan stara Us ned aii 12 min Mix output imp dances osa ras bas ae seid a Rha eed 40 ohm LF EQ Shelving oec Z gb hae ope K AR RR ee bas 10 dB 100 Hz HF EQ Shelving cc Ot pw Y Oe lang 10 dB 10 kHz HF TRANSDUCER TyDe a eta had Parcas hentai 1 compression driver with 1 3 4 diaphragm Power rating JEC 268 nens ec RI TASSO dee A p a CURE oO 60W Powerrat ng Peas waite ot Ex DER USE Oa Cele Oe ou S Re e EA HR 240W A LE 107 dB LF TRANSDUCER Type teneat a N R lakes 15 woofer with 3 voice coil Power rating TEC 268 xs secs Rabar nv aii 320 W Power rating T ox Saale cen daba tay Rx TR YU aa 1280
16. erage pattern also allows the MeFlex 12 to be a flown in a line source config uration and it will therefore Keyboard cD work well in highly reverber ant applications such as churches airports or railway stations When flown in a line source array the output of the MeFlex 12 is very high and opens up for use in high power applications such as live or large disco applications up to 300 people Keyboard CD and microphone without mixer Microphone MeFlex 15 MeFlex 15 is the largest model in the MeFlex family and offers true full range sound reproduction with high SPL It is aimed especially at top performance in live venues but applications also include AV productions small scale touring fixed installations and mobile DJ applications MeFlex 15 can be mounted on a stand and even used as a stage monitor The integrated handles lightweight design and sturdy mechanical protection features allow you to handle MeFlex 15 with ease in all applications 6 Introduction MeFlex S The 15 unit is a unique construc tion that features a lightweight chas sis The chassis is very open and enables excellent coupling of the diaphragm to the air in the cabinet It incorporates venting below the spider to reduce power compression and improve clarity A special Soft Roll design is featured in the spider This design allows for more than 18mm excursion A Kapton voice coil former ensures excellent mechanical stability Th
17. erformed by professionals following safe rigging standards and methods TRIPOD MOUNTING Apart from the versatile flying options the MeFlex 12 and MeFlex 15 also feature an integrated 35mm aluminium top hat adaptor which enables the box to be placed on a tripod When using a tripod note the following Make sure that the tripod is capable of supporting the weight of the speaker refer to specifications in the back of this manual Check that the tripod is placed on a stable surface Remember that tripod legs are trip hazards Place them away from the audience or place additional weight on the base of the stand to improve stability Mounting the speakers 11 STAND BY FUNCTION 12 1 The active MeFlex models feature a stand by function When this function is enabled and no input signal has been sensed for one hour or the signal is at a very low level the amplifier automatically shuts down When signal is restored to the speaker the amplifier will automatically be turned on The stand by function is disabled by default in models after and including MeFlex 12 115 volt models serial number 701124 MeFlex 12 230 volt models serial number 701316 MeFlex 15 115 volt models serial number 701555 MeFlex 15 230 volt models serial number 701694 Note that the serial number label can be found on the back of the speaker unit The stand by function is enabled by default in all models with serial numbers prior to these ENABLI
18. nal from sources such as CD players cassette MP3 players computer sound card outputs keyboard and other electrical instruments Input cables must be balanced Unbalanced cables will reduce the input level by 6 dB Rear panel interfaces 9 Volume control on these inputs is controlled by the Master volume control OUTPUT SECTION Master volume Adjusts the master output signal from ee to O dB Mix out This output enables link of the mixed signal microphone line signal to other MeFlex boxes Note that normally a link output will only allow for a few boxes to be linked before the quality of the signal is reduced In the MeFlex speakers an active line driver operates the link output so an unlimited number of MeFlex speakers can be linked while perfect signal quality is maintained Bass Adjust the bass output of the speaker Shelv 100 Hz 10 dB Treble Adjust the high frequency output of the speaker Shelv 10 kHz 10 dB 10 Rear panel interfaces MOUNTING THE SPEAKERS Caution FLYING OPTIONS The MeFlex models can be flown in three different ways Use the custom designed U brackets Typically used for flying horizontally in low ceiling applications or on truss Insert M6 eye bolts in the four flying points Typically used when flying vertically Insert the custom designed flying bracket in the four flying points Typically used for flying MeFlex in horizontal or vertical clusters Rigging should only be p
19. rs cafes retail stores fitness studios airports and other places where ease of use and high output from a compact and light weight speaker system is needed All powered MeFlex products features built in switch mode amplification and Dig ital Signal Processing made by f c electronic As such it represent the next genera tion of composite moulded speaker designs In addition the co axial design of the MeFlex 12 makes it the lightest and most compact 12 speaker in the market for moulded speakers And it opens up new application areas in the installation segment with its ability to be flown horizontally due to its uniform dispersion pattern A separate amplifier for the woofer and compression driver makes all MeFlex speakers true active speakers The switch mode amplification technology runs at relatively low temperatures and lets out very little heat For this reason no heat sinks are required on the MeFlex speakers thus offering the possibility of flying the speakers directly below the ceiling without going into heat protection By adding a DSP to the MeFlex series our R amp D team where enabled to have com plete freedom in dealing with the overall optimization of frequency and impulse response Having full control over the acoustics inside the cabinet pushes the limits of what is theoretically possible The result is a series of speakers with excellent performance and output In addition to the advantages in sound quality the digital limiter
20. t registers stoves or other apparatus including amplifiers that produce heat Protect the power cord from being walked on or pinched particularly at plugs con venience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Unplug this apparatus during lightning storms or when unused for long periods of time This equipment should be installed near the socket outlet and disconnection of the device should be easily accessible Do not install in a confined space Do not open the unit because of the risk of electric shock This device must be earthed Be advised that different operating voltages require the use of different types of line cord and attachment plugs Check the voltage in your area and use the correct type Introduction Do not removed the covers There are no user serviceable parts inside When installing the fixture above ground level verify that the structure can hold at least 10 times the weight of all installed devices Block access below the work area whenever installing or removing the fixture Do not modify the fixture or install other than genuine Mach parts Refer all service to a Mach service technician DESIGN CONCEPT The MeFlex powered speaker series consists of three models MeFlex 12 MeFlex 15 and MeFlex Sub Applications include sound reinforcement for live bands DJ s and AV work but also monitoring mixing installations in ba
21. ware in whole or in part You may not electronically transmit the Software from the Product platform to another in a network You may not separate the Software in its entirety or in parts from the hardware of the Product 4 Termination This License is effective until terminated You may terminate this License at any time by selling the Product This License will terminate immediately without notice from TC Electronic if you fail to comply with any provision of this License 5 Disclaimer of Warranty on TC Electronic Software You expressly acknowledge and agree that use of the Software is at your sole risk The Software and related documentation are provided on an AS IS basis and without warranty of any kind TC Electronic and TC Electronic Licensee s for the purposes of provisions 5 and 6 TC Electronic and TC Electronic Licensee s shall be collectively referred to as TC Electronic EXPRESSLY DISCLAIM ALL WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE TC ELECTRONIC DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF THE TC Electronic Software License Agreement 21 22 SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED FURTHERMORE TC ELECTRONIC DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE R
Download Pdf Manuals
Related Search