Fast Ethernet Media Converter 1 UTP Port & 1 Optical Port User`s
Contents
1. Activity OFF Not linked Fiber port works in full duplex a Fiber Duplex Fiber port works in half duplex oFF mode Half amp collision happens UTP port works in full duplex on mode T P Duplex UTP port works in half duplex om end fault pattern not cake T P 100 10M T P Link ON 100Base TX OFF 10Base T T Qi Technical Specifications Standard Protocol IEEE802 3 10Base T IEEE802 3u 100Base TX FX Connector 1 RJ 45 amp 1 optical port SFP or 1X9 Operation mode full duplex or half duplex Power supply 5V DC 1A Environmental temperature 0 C 60 C Relative humidity 5 90 UTP cable Cat5 UTP cable Fiber 50 125um 62 5 125um multi mode fiber or 9 125um single mode fiber Dimensions 26mm x 71mm x 94mm Cautions 1 This product is suitable for indoor application 2 Put on the dust cover of fiber interface when not used 3 It is forbidden to stare at the TX fiber transfer end with naked eyes2. 120km Our 10 100M Fast Ethernet Media Converter series are fully compliant with JIEEE802 3 IEEE802 3U 10 100Base TX 100Base FX standards They can be installed into a Standard Converter Chassis The installation amp operation procedures are simple amp straightforward Operation status can be locally monitored through a set of Diagnostic LED located in the front panel Tel 86 755 86674946 Features Email sales atoptechnology com Standards IEEE802 3 10Base T IEEE802 3u 100Base TX FX Interface 1 RJ 45 Port amp 1 Optical Port SFP or 1X9 Web www atoptechnology com Flow Control IEEE802 3x flow control for full duplex mode Back pressure flow control for half duplex mode LED Fiber Link Fiber Duplex Fiber Fault 1 P Link T P Duplex T P 100 10M Installation Attach fiber cable from the media converter to the fiber network The fiber connections must be matched between transmit socket and receive socket the TX RX fiber cable must be paired at both ends Attach a UTP cable from the 10 100BASE T network to the RJ 45 port on the media converter Connect the power adapter to the media converter The Fiber Link and T P Link LEDs will light up when all the cable connections are satisfactory 0 Link Link Duplex Duplex Fault 1000M Fiber T P UTP Figure 2 Back panel 4 LED Description ON Linked on fiber port Fiber Link FLASH Activity Not linked a Linked on UTP port Poe
3. ATOP Fast Ethernet Media Converter 1 UTP Port amp 1 Optical Port User s Manual ATOP TECHNOLOGY FCC Warning The 10 100M Fast Ethernet Media Converter series have been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These standards are designed to provide reasonable protection against harmful interference when these devices are operated in a commercial environment These devices can generate use and radiate radio frequency energy and may cause harmful interference to radio communications unless installed in accordance with this Users Guide Operation of these devices in a residential area is likely to cause harmful interference which will make the user responsible for the appropriate remedial action at his her own expense CE Mark Warning These are Class A products In a domestic environment these products may cause _ radio interference in which case the user will need to consider adequate preventative methods 1 Packing list The box should contain the following items The Media Converter AC DC Power Adapter The User s Manual Warranty Card Please notify your sales representative immediately if any items are missing or damaged 2 Overview The 10 100M Fast Ethernet Media Converter series are designed to meet the massive needs for network deployment and able to extend a copper based fast network via fiber cable to a maximum distance up to
Download Pdf Manuals
Related Search