ScreenManager Pro for LCD User`s Manual
Contents
1. 3 Auto FineContrast If unregistered application starts up apply Assign a FineContrast mode to the application to which any FineContrast modes are not registered in Application Registration When the unregistered application became active the monitor mode is automatically switched to the FineContrast mode assigned to the selected application To assign a FineContrast mode to the application select a FineContrast mode from the If unregistered application starts up apply pull down menu Allow independent mode switching by screen This option is available when connecting two or more monitors with the system If this option is checked the FineContrast mode changes for the monitor of application activated Other monitor screen s does not change the FineContrast mode When the application window is shown over several screens only the monitor will change its FineContrast mode that contains most of screen area of the application window Set priority for WindowMovie mode Checking this option enables the monitor to remain in WindowMovie mode Even when choosing another application the monitor does not change FineContrast mode e If your monitor does not support the WindowMovie mode Set priority for WindowMovie mode is not displayed 11 3 Auto FineContrast 3 2 WindowMovie Mode WindowMovie mode is one of the FineContrast modes which is available only in the ScreenManager Pro for LCD The2. tab is checked e Close the setting window Closing the setting window enables the function 4 Hot key is disabled e Close the setting window Closing the setting window enables Timer is disabled the function 5 WindowMovie mode does not work WindowMovie mode may not work with some movie file Gamma correction Direct Draw and Direct Draw Overlay functions are required for the graphics board to activate the WindowMovie mode Run checker application from the menu window of the CD ROM to confirm that your graphic board meets these functions 6 Alarm is not activated Timer e Confirm the Activate alarm 5 minutes before turning off the monitor is checked e Click the Alarm sound to specify the sound file e If your OS is Windows Vista or Windows 7 the WindowMovie mode is not available because overlay is not supported 8 A function cannot be set or performed Pe eee ee ColorNavigator adjustment or SelfCorrection is finished For Multi monitor Setting only 8 The target monitor cannot be controlled or USB connected monitor might not related correctly to the the other monitor is controlled instead of software Follow the procedure described in Manual Setting target monitor page 25 26 Glossary Glossary ContrastEnhancer The function to control the brightness of backlight and the gain level as well as correct gamma value according to the images So it can produce high contrast image
3. The file select window appears 3 Select a sound file and click Open The selected sound file is registered as the alarm sound e Even if the Activate alarm 5 minutes before turning off the monitor is checked it is necessary to click the Alarm sound to specify the sound file How to Specify the Day of the Week for the Timer 7 Click Day of the week The setting window of the day of the week appears 2 Enable the checkbox of the day of the week that you want the timer to work 3 Click OK 4 Click Close The timer is enabled 21 22 8 Sound 8 Sound Volume treble bass and or balance can be controlled for the built in speaker supported monitor e For HD24xxW the settings such as the volume of external speakers connected to the monitor are adjustable and the sound can also be adjusted with the ScreenManager Pro for LCD e Sound settings are not possible while SelfCorrection is running Make sound settings after SelfCorrection is finished 5 ScreenManager Pro for LCD Auto FineContrast Color Adjustment Screen Adjustment Hot Key Timer Sound NID D Monitor E Monitor2 FX2431 Sound Control Volume Treble Bass Balance htto fwww eizo com When two or more monitors are connected to the system select the monitor to set from Monitor pull down menu If some monitors are not displayed perform Manual Setting page 2
4. mode is not available because overlay is not supported e The Auto FineContrast function requires the ScreenManager Pro for LCD setting icon is resident in the notification area The Auto FineContrast function cannot be used when the monitor is being adjusted using ColorNavigator Use the Auto FineContrast function after the monitor adjustment e The FineContrast mode is referred to as the Color mode depending on the type of your monitor P ScreenManager Pro for LCD Auto FineContrast Color Adjustment Screen Adjustment Hot Key Timer Sound AUS REIN ESC ONSTAR TAS ST Activate Auto FineContrast Application Registratio Check to activate Auto FineContrast Application Selection function ER EQRE w Register a FineContrast mode to the FineContrast made for selected application application or delete the registration Custam mode If unregistered application starts up apply 5 2 Refer to If unregistered application starts Not change the mode up apply page 11 Refer to Allow independent mode switching by screen page 11 http vwww eizo com Refer to Set priority for WindowMovie mode page 11 3 Auto FineContrast 3 1 Auto FineContrast Setting 10 To set the Auto FineCotrast assign a FineCotrast mode to the application according to the following procedure 1 2 Check Activate Auto FineContrast Select an application from Appl
5. Windows XP Service Pack 3 Microsoft Windows XP Professional x64 Edition Service Pack 2 Built in USB Version 3 0 or more e When multiple monitors are connected each monitor should display an independent screen Displaying the same screen on each monitor or across multiple monitors prevents adjustment using the ScreenManager Pro for LCD For details of how to change the settings see the User s Manual of the graphics board Independent screen on Same screen on each A screen over the multiple each monitor OK monitor NG monitors NG 1 Setting Up 1 2 Installing the ScreenManager Pro for LCD 7 Connect the USB cable Connect the USB upstream port of the monitor to the USB downstream port of the USB compliant PC or another hub by using the EIZO USB cable ex L J USB Upstream Port USB Downstream Port q ET Clef c e Refer to the user s manual of the monitor for setting up the USB function For HD24xxW FX2431 FX2431TV ColorEdge CX CS series monitor e Connect the USB cable to the USB port upstream that fits the PC PC 1 PC 2 connector Refer to the Setup Manual of the monitor how to connect the USB cable and set up the USB e For HD24xxW Switch the USB settings of the monitor to match the PC For USB settings refer to 2 1 or 3 1 In
6. e Hot key operation is not possible when the monitor is being adjusted using ColorNavigator e Hot key operation is not possible while SelfCorrection is running e The USB Power Save setting will be disabled if the hot key function is used on a monitor equipped with the USB Power Save function For monitors other than HD24xxW MH240W FX2431 FX2431TV E ScreenManager Pro for LCD Auto FineContrast Color Adjustment Screen Adjustment Hot Key Timer Sound UNE 1020 Monitor f Ej Monitor1 5X24614 Hotkeys Power On Off None Input Signal Selecti on None For HD24xxW FX2431 FX2431TV F ScreenManager Pro fo r LCD httoviwww eizo com Auto FineContrast Color Adjustment Screen Adjustment HotKey Timer Sound Monitor _ Hotkeys f Power On Off LME 10400 Monitor2 HD244 2 Volume Up None None PinP On Off Volume Down None None Sub Window On Off Brightness Up None None Sub Window Input Selection Brightness Down None None PinP Sound Selection None sil http eizo com 18 3 6 Hot Key When two or more monitors are connected to the system select the monitor to set from Monitor pull down menu e If some monitors are not displayed perform Manual Setting page 25 Set hot keys to the monitor
7. function is not active when the monitor is being adjusted using ColorNavigator e The USB Power Save setting will be disabled if the timer function is used on a monitor equipped with the USB Power Save function P ScreenManager Pro for LCD Auto FineContrast Color Adjustment Screen Adjustment HotKey Timer Sound P NAJ E Monitor2 5x2461 Setting Time Power Setting Time Power Enable Disable 12 34 ON OFF Enable Disable 12 34 ON OFF Monitor Timer Settings Settings Specify the time and select on or off setting of the power Setting Settings Check to alarm 5 minutes before turning off the monitor Refer to How to Set the Alarm page 21 Click to set the day of the week when the timer works Refer to How to Specify the Day of the Week for the Timer page 21 Click to hear the set alarm sound http eizo com 7 When two or more monitors are connected to the system select the monitor to set from Monitor pull down menu If some monitors are not displayed perform Manual Setting page 25 2 Specify the time to turn on or off the monitor Up to eight schedules can be set 20 7 Timer J Set the alarm sound and the day of the week for the timer according to your preference How to Set the Alarm 7 Check Activate alarm 5 minutes before turning off the monitor 2 Click Alarm sound
8. 5 2 Adjust the sound in Sound Control according to your preference e For some monitor models some items may not be adjustable e Click Reset to change the settings back to the default e For HD24xxW FX2431 FX2431TV the sound does not get back to the default by clicking Reset 9 EyeCare 9 EyeCare By recording the monitor operating time and showing pop up messages periodically you can care the health of your eyes EyeCare Recorder When the ScreenManager Pro for LCD is active the power on time of the monitor is recorded The screen saver running time is recorded because the monitor is on However when the monitor is in the power saving mode the time is not recorded About the power saving mode refer to the user s manual of the monitor Recorded monitor operating time can be output to the CSV file or checked with the pop up messages in the notification area EyeCare Reminder Any pop up messages can be shown periodically e The EyeCare EyeCare Recorder EyeCare Reminder requires the ScreenManager Pro for LCD setting icon is resident in the notification area e The USB Power Save setting will be disabled if the EyeCare Recorder function is used on a monitor equipped with the USB Power Save function 9 1 EyeCare Setting 7 Right click the ScreenManager Pro for LCD setting icon in the notification area and select EyeCare Setting from the list E
9. Put the mouse pointer over the item to which set a hot key and then press any key Pressing either Delete or BackSpace key displays None in the box and resets the hot key e Multiple keys can be set in combination For example when press three keys Ctrl Shift and F2 at the same time Ctrl Shift F2 is displayed e The keys assigned to Windows OS such as Windows logo Delete BackSpace Tab or Enter are not available for the hot keys e For details of the monitor functions refer to the user s manual of the monitor Click Close The hot key setting is enabled e When two or more monitors are connected to the monitor and the same hot key is set for each monitor the setting starts up on each monitor simultaneously by executing the hot key e The set keys cannot be used for other application software as long as ScreenManager Pro for LCD is running e The mute setting of speaker is not available 19 7 Timer 7 Timer With this function the monitor s power is automatically turned on or off at the preset time the monitor power status is the same as pressing the power button of the monitor directly This function refers to the system clock in the OS making it independent from the monitor or computer s power saving system An alarm option which is activated 5 minutes before turning off the monitor is available e The timer
10. User s Manual ScreenManager Pro for LCD Important Please read this User s Manual carefully to familiarize yourself with safe and effective usage About ScreenManager Pro for LCD 0 cecscee 3 IE Setting ll PRE TE 4 1 1 System Requirement sesiis 4 1 2 Installing the ScreenManager Pro for LCD o s 5 1 3 Setting Icon in the Notification Area 6 1 4 Uninstalling the ScreenManager Pro for LCD F 2 How to Start up Exit out of the Setting Window 8 S Auto RineCOntraStinwaunscrwninss mum teetineeets 9 3 1 Auto FineContrast Settings 10 3 2 WindOWwMOviS MOG sus 12 4 Colon Adjustment e seen ere Sere 13 5 ScreemAdjustme nte oe ree eaae se herons i EROF KEV En Lin errant min memes 18 METIER Rennes manette mem 20 BE SOUPER a semer 22 D EVE CAC Re 23 9 1 EVECA TS SONO ia coca consensus 23 9 2 Operating Time Checking ss 24 10 Using the Software with Multi monitor Setting 25 HHMOUDIESNOON OR rae 26 Glossary Tir rames a eeeen erent 27 EIZO No part of this manual may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical or otherwise without the prior written permission of EIZO NANAO CORPORATION EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION s receipt of said information Although ever
11. WindowMovie mode can show an overlay window videos with higher contrast This mode is suitable for watching DVDs and TV The brightness of area outside overlay window videos can be controlled separately refer to the following picture While displaying videos DVD or TV brighter the DTP or e mail software can be displayed with normal brightness Using Spreadsheet Software while playing DVD with Higher Brightness 7 Select the application to play videos from the Application Selection pull down menu 2 Select WindowMovie mode from the FineContrast mode for selected application Luminance is enabled Click Luminance to open the setting window 3 4 Adjust the parts other than the video window by moving the slide bar 5 Click OK e More than two video applications cannot be displayed with high brightness at the same time e WindowMovie mode may not work with some movie file e To activate the WindowMovie mode the graphics board that supports Gamma correction Direct Draw and Direct Draw Overlay functions is required To confirm the graphic board supports these functions execute the WindowMovie check software of the EIZO LCD Utility Disk CD ROM e If your OS is Windows Vista or Windows 7 the WindowMovie mode is not available 12 4 Color Adjustment 4 Color Adjustment Color settings of each FineContrast mode can be adjusted and registered independently Customi
12. d O High sels o D 2 DOG e Clicking Reset returns only the currently used Color mode to the default settings 6 Colors The hue and saturation of the six colors red green blue yellow cyan and magenta can be adjusted by using the graphical adjustment patterns Adjust the hue and saturation by dragging the six adjustment points 6 Colors Control OK Default Click OK 15 4 Color Adjustment 16 Register Delete Restore the monitor adjustment data The color adjustment data adjusted in Color Adjustment tab can be registered with any name By reading the registered data the adjusted values of each parameter can be reflected to the monitor all at once Register Enter any name in Adjustment Data Name text box and then click Register Delete Select the color adjustment data name from Adjustment Data Name pull down menu and then click Delete Selected color adjustment data is deleted Restore Select the color adjustment data name from Adjustment Data Name pull down menu and then click Restore Selected color adjustment data is reflected to the monitor 5 Screen Adjustment 5 Screen Adjustment If connecting a computer through analog signal input you can adjust a screen easily by mouse with displaying patterns for screen adjustment Auto Adjustment function automatically adjusts the flicker in screen display posi
13. dge CX CS series monitor the CAL mode corresponding to the input port being used will be selected 13 4 Color Adjustment 3 Adjust each parameter LE e The adjustable items in Parameter Adjustment depend on the monitor Refer to the user s manual of the monitor to confirm that your monitor supports the items e Brightness may be expressed in the unit of candela cd m depending on the type of your monitor If the entered value cannot be set the value will appear in magenta Color The same functions with the monitor s ScreenManager OSD Color menu Color Temperature Brightness Contrast Gamma OutlineEnhancer ContrastEnhancer Auto EcoView Saturation Hue Gain Black Level and Clipping are available e For monitors other than HD24xxW MH240W FX2431 FX2431TV Color Adjustment Color Temperature Brightness Contrast Gamma OutlineEnhancer ContrastEnhancer orF OoN e Clicking Reset returns only the FineContrast mode currently being used to the default settings Resetting the Custom User mode will also return the 6 Colors values to the default settings 4 Color Adjustment e For HD24xxW FX2431 FX2431TV Color Adjustment Color Temperature a Brightness aturation Q Contrast a Q E 3 Gamma D i OutlineEnhancer J ContrastEnhancer OFF OON Auto Ecoview O Disable Standar
14. ication Selection pull down menu e Application names that have been active and that have been already registered as FineContrast modes are displayed in the pull down menu Select a FineContrast mode to assign from FineContrast mode for selected application pull down menu e Each FineContrast mode availability depends on the models e For details of the FineContrast modes refer to the user s manual of the monitor WindowMoview is for ScreenManager Pro for LCD only When this mode is selected the brightness of the parts other than video overlay window can be adjusted by clicking Luminance It is suitable for word processing or reading while playing videos on DVD or TV with high brightness For the details on the setting refer to 3 2 WindowMovie Mode page 12 This mode is not available for Windows Vista or Windows 7 e User color data which is registered in the Color Adjustment tab can be also selected as a mode of Auto FineContrast function Click Register The FineContrast mode is assigned to the application and the assignation is registered To register applications continuously repeat step 2 through step 4 Click Close Auto FineContrast setting is enabled When the registered application became active the monitor mode is automatically switched to the FineContrast mode assigned to the selected application e No FineContrast modes can be assigned for Windows desktop
15. olled instead of target monitor e Manual settings are not possible when the monitor is being adjusted using ColorNavigator e Manual settings are not possible while SelfCorrection is running Manual Setting 7 Right click the icon in the notification area and select the Monitor Connection List from the list Monitor Connection List Monitors that the software detects are listed To add the monitor or to relate the monitors to software manually click Manual setting Monitor Model Serial No 1 Monitor2 2111W 00000000 2 Monitori S2410W 00000000 2 Click the Manual setting and follow the instruction on screen to assign the monitor to the software 25 11 Troubleshooting 11 Troubleshooting Problems Possible cause and remedy 1 The icon is not shown in the notification area Click Start All Programs EIZO ScreenManager Pro for LCD ScreenManager Pro for LCD Ver x x x to start up the software 2 The icon is in monochrome e Confirm the USB cable is correctly connected E Le Turn off the PC power then turn it back on fim If the problem persists follow the procedure described in i E Manual Setting page 25 3 Auto FineContrast is disabled e The Auto FineContrast function requires the ScreenManager Pro for LCD setting icon is resident in the notification area Confirm Activate Auto FineContrast option in the Auto FineContrast
16. ou can check the operating time of your monitor Check the Operating Time with Pop up Message The monitor operating time will pop up on an hour basis by clicking the ScreenManager Pro for LCD setting icon or by starting up the ScreenManager Pro for LCD ScreenManager Pro for LCD Monitor Operating Time Monitor 51932 Today 1H Yesterday 8H This month 14H Output the Operating Time to the CSV File Click Output File in the EyeCare setting window refer to 9 1 EyeCare Setting page 23 to output the monitor operating time to the CSV file in the past three months on a day basis A B C D E Year Month Day Hour s Minute s 2009 11 0 0 0 0 0 40 20 20 ooN e WN a ONAN 4 Lo No a ShR Dmo uw 24 10 Using the Software with Multi monitor Setting 10 Using the Software with Multi monitor Setting ScreenManager Pro for LCD supports the multi monitor setting and it can control two or more monitors through the software Before you use the application software confirm none of the following problems exist If the one of the following problems remain perform Manual Setting e ScreenManager Pro for LCD setting icon is displayed in monochrome even though the USB cable has been connected correctly and the computer has been restarted e The connected monitor is not displayed in Monitor pull down menu of the setting window e The target monitor cannot be controlled or the other monitor is contr
17. put Signal Switching of the user s manual of the monitor e For FX2431 FX2431TV Switch the USB Selection settings of the monitor to Auto or to match the PC For USB Selection settings refer to 2 1 or 3 1 Input or Broadcast Signal Switching of the user s manual of the monitor e ColorEdge CX CS series monitor This function allows the input signal to link the USB upstream port when one monitor is connected to two PCs For details refer to the User s Manual of the monitor Insert the EIZO LCD Utility Disk CD ROM to the CD ROM drive Menu opens automatically Click Software tab Click ScreenManager Pro for LCD on the menu e When the menu does not appear automatically double click Launcher exe 1 Setting Up 3 Install the software Click Install on the menu then the ScreenManager pro for LCD installer starts up Follow the instruction of the menu to install the software When the installation completes the ScreenManager Pro for LCD setting icon appears in the Windows notification area RE 12 00 e Download and install the software from our website according to the following procedure 1 Extract the downloaded file 2 Double click Setup exe The setup wizard starts up Install the software as prompted by the wizard 1 3 Setting Icon in the Notification Area The software has detected the connected monitor ScreenManager Pro for LCD is ac
18. s Clipping The function to show a color gamut of the monitor according to the specification of the configured color gamut such as sRGB OutlineEnhancer The function to enhance the color difference between pixels of the image to sharpen the outline of the image and enrich the texture It can also blur the outline so that the image looks smooth and soft Overlay Displaying several screens such as video screens with overlapped This function is supported by a graphic board The Software DVD Player uses this function to display DVD screen Also other applications such as Windows Media Player QuickTime Player RealPlayer and TV Play application use this function sRGB sRGB is the international standard for unifying such as color reproduction and color space of computer peripheral devices monitor printer digital camera scanner and so on Set monitor s FineContrast mode to sRGB the color temperature of the monitor is fixed to 6500K WindowMovie The mode to brighten the overlay window area when using the video application It is suitable for using an e mail or word processing application as playing videos brightly on DVD or TV program 27 EIZO EIZO NANAO CORPORATION http www eizo com 13th Edition July 2012 03V22217N1 Copyright 2012 EIZO NANAO CORPORATION All rights reserved U M SMPROLCD
19. t function e Screen Adjustment The ScreenManager Pro for LCD software provides the monitor s screen adjustment functions through the computer e Hot Key Setting The monitor functions can be assigned to any keys on the keyboard e Timer The software turns on off the monitor s power based on the preset timer schedule e Sound Control Volume and balance can be controlled if the monitor employs built in speakers For HD24xxW MH240W the settings such as the volume of external speakers connected to the monitor are adjustable and the sound can also be adjusted with the ScreenManager Pro for LCD e EyeCare By recording the monitor operating time and showing pop up messages periodically you can care the health of your eyes EyeCare Recorder When the ScreenManager Pro for LCD is active the power on time of the monitor is recorded Recorded monitor operating time can be output to the CSV file or checked with the pop up messages in the notification area EyeCare Reminder Any pop up messages can be shown periodically e Multi monitor Setting Support Using the monitor with Multi monitor setting the software sets up or adjusts each monitor individually 1 Setting Up 1 Setting Up 1 1 System Requirements The ScreenManager Pro for LCD software operates under the system shown below Microsoft Windows 7 Service Pack 1 32 bit and 64 bit Microsoft Windows Vista Service Pack 1 Service Pack 2 32 bit and 64 bit Microsoft
20. the notification area click Start All Programs EIZO ScreenManager Pro for LCD ScreenManager Pro for LCD Ver x x x to start up the software P ScreenManager Pro for LCD Auto FineContrast Color Adjustment Screen Adjustment Hot key Timer Sound A USI SUMAN teu UN SAK IAD SST Activate Auto FineContrast Application Registration Application Selection IEXPLORE v Register Delete FineContrast mode for selected application Custom mode v If unregistered application starts up apply Not change the mode Allow independent mode switching by screen Set priority for WindowMovie mode hip www elzo com Click to visit our web site How to Exit out Click Close on each setting window About ScreenManager Pro for LCD The software version can be checked by clicking About through the ScreenManager Pro for LCD icon on the far left of the title bar 3 Auto FineContrast 3 Auto FineContrast By registering a FineContrast mode to each application the monitor automatically switches its FineContrast mode for each application The WindowMovie mode specially provided for this software is available In the WindowMovie mode the brightness of Overlay window area can be controlled separately Refer to 3 2 WindowMovie Mode page 12 e If your OS is Windows Vista or Windows 7 the WindowMovie
21. tion size and resolution The gray balance will be also adjusted at the same time For some monitor models resolution may not be adjustable e Screen Adjustment is not available for digital signal input because the screen is displayed properly based on the setting data of this monitor e Screen adjustment is not possible when the monitor is being adjusted using ColorNavigator Perform screen adjustment after the ColorNavigator adjustment e If SelfCorrection has been started the screen adjustment function will be disabled Perform screen adjustment after SelfCorrection is finished P ScreenManager Pro for LCD Auto FineContrast Color Adjustment Screen Adjustment Hot Key Timer Sound JA S AA Monitor E Monitor2 5X2461 Screen Adjustment Auto Adjustment Manual Adjustment http viwwiw eizo com 7 From Monitor pull down menu select the monitor to adjust when two or more monitors are connected to the system e If some monitors are not displayed perform Manual Setting page 25 2 Click Auto Adjustment Auto adjustment function starts working 3 When the screen is not displayed properly click Manual Adjustment Adjust manually according to the instructions of the screen 17 6 Hot Key 6 Hot Key The monitor functions can be assigned to any keys on the keyboard Pressing the key on the keyboard performs the same operation as executing a function
22. tive The software has not detected the connected monitor ScreenManager Pro for LCD is not active Confirm the USB cable is correctly connected If the problem persists turn off the PC power then turn it back on Monochrome e See 10 Using the Software with Multi monitor Setting page 25 when connecting two or more monitors with the system e The software does not detect the monitor automatically when using SX3031W monitor with Dual Display setting Follow the procedure described in Manual Setting page 25 1 Setting Up 1 4 Uninstalling the ScreenManager Pro for LCD Windows 7 Windows Vista 7 Select Control Panel Programs and Uninstall a Program 2 Select ScreenManager Pro for LCD from the list and click Uninstall Windows XP 7 Select Control Panel Add Remove Programs 2 Select ScreenManager Pro for LCD from the list and click Remove to remove the software 2 How to Start up Exit out of the Setting Window 2 How to Start up Exit out of the Setting Window How to Start up Right click the ScreenManager Pro for LCD setting icon and select Setting of ScreenManager Pro for LCD The ScreenManager Pro for LCD setting window appears e The setting window can also be shown by double clicking the ScreenManager Pro for LCD setting icon in the notification area e When the ScreenManager Pro for LCD setting icon is not resident in
23. y effort has been made to ensure that this manual provides up to date information please note that EIZO monitor specifications are subject to change without notice QuickTime is a registered trademark of Apple Inc RealPlayer is a registered trademark of RealNetworks Inc Windows Windows Media and Windows Vista are registered trademarks of Microsoft Corporation in the United States and or other countries EIZO EIZO Logo ColorEdge ColorNavigator and ScreenManager are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries All other trademarks are the properties of their respective owners About ScreenManager Pro for LCD About ScreenManager Pro for LCD ScreenManager Pro for LCD is the software for adjusting the monitor from the computer using the mouse or keyboard through the USB interface Features e Auto FineContrast By registering a FineContrast mode to each application the monitor automatically switches its FineContrast mode for each application The WindowMovie mode specially provided for this software is available The FineContrast mode is referred to as the Color mode depending on the type of your monitor e Color Adjustment Adjustment Data Registration Function The ScreenManager Pro for LCD software provides the monitor s color adjustment function Adjusted data can be stored loaded as registry data of the system User color data is also available as a mode for Auto FineContras
24. yeCare setting window appears Target Monitor E Monitori 81932 EyeCare Recorder V Record the operating time Output File EyeCare Reminder V Pop up the message periodically Interval 1 H Edit Message 2 When two or more monitors are connected to the system select the monitor to set from Monitor pull down menu If some monitors are not displayed perform Manual Setting page 25 e If the target monitor is changed all of the previous records are vanished 23 9 EyeCare 3 Set EyeCare Recorder and EyeCare Reminder How to set EyeCare Recorder Check Record the operating time When the ScreenManager Pro for LCD is running the monitor operating time is recorded up to three months on a 20 minute basis How to set EyeCare Reminder The message is periodically popped up on the ScreenManager Pro for LCD setting icon in the notification area ScreenManager Pro for LCD x Won t you have a break to rest your eyes 1 1200 Check Pop up the message periodically 2 Set the display intervel of the message The message can be set up to 24 hours by the hour 3 Click Edit Message to edit the message The message editing window appears The message can be edited within 255 characters 9 2 Operating Time Checking By checking Record the operating time of the EyeCare Recorder refer to 9 1 EyeCare Setting page 23 y
25. zed adjustment data of the monitor can be stored in the PC and loaded at any time e Color settings cannot be made when the monitor is being adjusted using ColorNavigator Make color settings after the ColorNavigator adjustment If SelfCorrection has been started the color adjustment function will be disabled Make color settings after SelfCorrection is finished e The FineContrast mode is referred to as the Color mode depending on the type of your monitor E Sc reenManager Pro for LCD Auto FineContrast Color Adjustment Screen Adjustment Hat key Timer Sound CO TNO RMA DAU Sena EINT Monitor E Monitori 8x2461W ode Selection Adjust the color basically Refer to Color page 14 Custom mode Harameter Adjustment Adjust the hue and saturation of 6 colors Refer to 6 Colors page 15 Register Restore the monitor adjustment data Adjustment Data Name Register and read the color adjustment hitoviwww eizo com status to reflect to the monitor Refer to Register Delete Restore the monitor adjustment data page 16 7 From Monitor pull down menu select the monitor to adjust when two or more monitors are connected to the system e If some monitors are not displayed perform Manual Setting page 25 2 Select the FineContrast mode for color adjustment from the Mode Selection pull down menu If CAL mode is selected on a ColorE
Download Pdf Manuals
Related Search