Home

Land Rover TestBook User Manual - Eng

1. Load paper into the printer The paper feeder on your TestBook printer is designed to handle a stack of dry paper no more than 5mm high If too much paper is put in or if the paper is damp the feeder may jam Paper should therefore be stored in a warm dry place such as an office rather than in the workshop Any paper left in the feeder tray at the end of a working shift should be removed and put back into store until needed again If left out overnight it will absorb moisture from the air as the temperature falls Attach the two additional CD caddy holders these will be found in the small box at the bottom of the trolley box They snap into place below the two pre installed caddy holders line up the plastic tabs into the grooves and push each caddy holder firmly into place The holders should then be flush to one another in two rows of two You should now have a fully operational TestBook trolley unit that only requires the mains cord to be plugged into a mains supply socket in order to start work Please note however that the internal battery discussed in a later section is supplied in a discharged state To fully charge it you should leave TestBook plugged into the mains but with TestBook itself turned off overnight before starting to use it TROLLEY INSTALLATION GUIDE TESTBOOK 2 If you are using a TestBook Trolley this gives a convenient purpose designed location for your TestBook The Trolley is del
2. ivered to you as a virtually complete assembly you only need to fit the TestBook its printer the trolley door and you will be ready to begin using TestBook 11

Land Rover TestBook User Manual - Eng

Contents

Download Pdf Manuals

Related Search

Related Contents