Scan Mode
Contents
1. c Press up down arrow button to choose Delete Press right arrow button to select yes no to delete the file d Press up down arrow button to select Yes Press OK to save the setting The image is deleted INSTALLATION OF AMBER FILTER BOARD FAS BG LED BOX is equipped with an amber filter board for cyan light protection and gel cutting purposes Open the lid and install the filter board so the gel cutting task may be conducted 1 Open the lid cyan light will auto turn off 2 Lift the lid to its maximum open angle 3 Position the amber filter board with the hole for hanging on lid in front Figure 8 4 Place the amber filter board onto the filter board hanging tab so the filter board may hang as shown in Figure 9 5 When hanging on the lid make sure the two small rods on the filter board are placed closely against the lid 6 The installation is completed One may turn on cyan LEDs by Scan button for further gel cutting purpose Figure 9 Filter board hanging tab Amber Filter Board Small rod DISPLAY SCANS ON Monitor or Projector The display from the scanner can be displayed on a television rather than the built in scanner preview screen using the VGA port 1 Set the television to VGA mode see monitor documentation for details 2 Connect the included VGA cable to the video port on the monitor 3 Connect the other end of the cable to the VGA port on the back of the scanner2. 4 Video output from the scanner can now be seen on the connected monitor including the full menu interface Functional Menu When image display on screen in yellow border press OK button so the functional icon will show on the left upper corner A Function Descriptions l i He o n fo Scan Mode The object is able to be scanned in this mode LED Lighting Mode To select the white light application for White Epi White Back Light image scan respectively Note this mode is available only when white light application is selected m O Exposure Mode To adjust the exposure time frame in this mode Carb BW Color Switch Mode To scan display the image in B amp W B amp W invert mode Default setting monochrome black amp white iT Set Up Mode To set up the following parameters a LCD Dark Normal Bright b Display LCD VGA c Video Output 800x600 1024x768 d Filename Setup Filename e Save Format TIF JPG BMP JPG is default setting f Quick View 1 sec 2sec 3 sec off 2sec is default setting g Slide Show Cycle 2 sec 3sec 5 sec 10 sec 2sec is default setting h Power Save 1 min 3 min 5 min 10 min off 1 min is default setting i Language English Japanese j Date setup date yyyy mm dd k Time setup time hh mm ss Reset Yes No Reset all current settings back to factory default m About product name S W version F W version Update
3. off 2sec is default setting g Slide Show Cycle 2 sec 3sec 5 sec 10 sec 2sec is default setting 14 Setup Menu and related setting items cont d h Power Save 1 min 3 min 5 min 10 min off 1 min is default setting i Language English Japanese j Date setup date yyyy mm dd k Time setup time hh mm ss Reset Yes No Reset all current settings back to factory default m About product name S W version F W version Update FW CWD Version Function Descriptions II oO vy BAR it Play Mode o a When oi icon displays on top left corner of the screen press OK to get into functional options b When Scan Mode icon is highlighted press OK again to get into Play Mode c The Play Mode icon o will display on top left corner of screen The captured images can then be reviewed one by one by pressing right arrow button d Press Upper down arrow button the image can be zoomed in out and be removed upward downward and leftward rightward e Press OK twice to get back to Scan Mode It will take few seconds to complete the process 16 Auto Play Mode D a When in Play Mode o press OK to get into functional option list D b Press right arrow button to choose Auto Play Mode then press OK c The captured image will automatically display on LCD screen one by one d Press OK to get into f
4. sec 21 Scales Image Storage USB flash drive View Area 16 x 10 5cm Fixed Lens ll Lens and Filter Manual Driven 2 position Emission Filter 518nm Amber Filter Filter Turret lll Lighting Blue Light 510 nm cyan LED Light Epi White Light LED White Light White Back Light LED White Light Panel VI Interface Display Panel Output V General Info Power Dimension WxHxD Gel Tools Weight Certification Build in 2 7 TFT LCD 1 USB 2 0 port x2 Thermal printer and USB flash drive 2 VGA out 800x600 1024x768 AC Adaptor 12V 4 16A 207xX229x254mm 8 14 x 9 02 x 10 inch Amber View Shield Gel Tray 3 2Kg 7 05 Ib CE FCC User s Manual FAS BG LED BOX Made in Taiwan NIPPON Genetics Co Ltd Koraku Mori Bldg 18F 4 14 Koraku 1 Chome Bunkyo ku Tokyo 112 0004 Japan Phone 81 0 3 3813 0961 fax 81 0 3 3813 0962 e mail info genetics n co jp web htto www genetics n co jp
5. FW CWD Version Functional Menu B Function Descriptions II o D s FHR Play Mode To play the captured images To examine the captured image Press Upper down arrow button the image can be zoomed in out and be moved upward downward and leftward rightward lt 1 Auto Play Mode To automatically play the captured images one by one ra Edit Mode To edit the captured images rotate delete and flip Preview Mode To preview the captured images in a multi image thumbnail panel 1x1 2x2 3x3 i Set Up Mode Same as the Set Up Mode functions in Function Descriptions I 11 Function Descriptions I oe ai Scan Mode fo When i icon displays on top left corner of the screen the object is ready to be scanned LED Lighting Mode Hic i a When in Scan Mode press OK to get into functional option list b Press right arrow button to choose LED Lighting Mode c Press up or down arrow button to choose light source White Epi or White Back Light d Press OK to save the setting LED Lighting Mode Is only available when switching to white light application 1 White Back Light mode is to scan the SDS PAGE gel stained with coomassie blue and preserved ina transparent media ri Exposure Mode lt O a When icon displays on top left corner of the screen press OK to get into functional option list b Press right arro
6. User s Manual FAS BG LED BOX PACKAGE CONTENTS Scanner unit User s manual Upper lid A C power adapter 12V 4 16A DC Amber filter board included Black plastic board included Gel tray w o stopper included LCD display Up Down Left Right menu button SCANNER COMPONENTS USB 2 0 Port Front Figure 1 Cyan Light White Light selection switch Up Down Left Right menu button Fi USB 2 0 Port pan rani bukan Scan button Cyan Light White Light selection switch Power On Off Button LCD display Upper lid Power Button vw gt wv gt w gt vw o gt wv Back Figure 2 DC power USB 2 0 port VGA port DC power Inside Figure 3 Upper lid Lighting area Lid Sensor USB 2 0 port VGA Our Port Figure 2 Figure 3 s Lid Sensor SETUP ONAN RWNE Remove all tapes used to hold items in place for shipping Place FAS BG LED BOX unit on flat surface Connect power source connect AC power adapter to back of unit then plug into electrical outlet Push power button Insert USB flash drive The Menu Mode icon will be displayed on the top left side of the display Figure 4 Place gel tray directly on the surface of the Lighting area Figure 5 Adjust the image condition and scan Menu icon Lighting Area Figure 4 Figure 5 SCANNING FLUORESCENCE STAINING GEL 1 In Scanning Mode i lift the lid to open the scanne
7. g of Functional Descriptions section for details of turn on of White Epi or White Back Light application 5 Adjust the desired image quality through the Functional Menu if necessary Please check Functional Descriptions section for the details of all functions 6 Press SCAN button green LED will flash and CAPTURING will be displayed on the screen If thermal printer had connected with FAS BG LED BOX Printing Yes No will be displayed on the screen The scanned image will automatically be saved to USB flash drive Scanning of the blot is now complete White Back Light mode is to scan the SDS PAGE gel stained with coomassie blue and preserved in a transparent media BROWSE SCANNED IMAGES DELETE SCANNED IMAGES Examine Scanned Images a When Gi icon displays on top left corner of the screen press OK to get into functional options b When Scan Mode icon is highlighted press OK again to get into Play Mode c The Play Mode icon o will display on top left corner of screen The captured images can then be reviewed one by one by pressing right arrow button d Press Upper down arrow button the image can be zoomed in out and be removed upward downward and leftward rightward Delete Scanned Images a When viewing the image that needs to be deleted press OK to get into Function Descriptions Il b Press right arrow button to choose Jf Edit Mode
8. r 2 Slide the black plastic board into the groove of the white backlight to block the white light on the lid Figure 7 3 Close the scanner lid Slide the Light Selection Switch on the front side of White backlight the scanner to choose cyan light source for scanning Stained gel 5 Set and adjust the desired image quality through the Functional Menu if necessary Please check Functional Descriptions section for the details of all functions 6 Press SCAN button green LED will flash and CAPTURING will be displayed on the screen If thermal printer had connected with FAS BG LED BOX Printing Yes No will be displayed on the screen The scanned image will automatically save to USB flash drive Black plastic board Figure 7 Slide the black plastic board to avoid the background light for fluorescent stained gel scanning Scanning of the gel sample is now complete itis suggested to slide the black plastic board to block the white backlight on the lid for fluorescent stained gel scanning SCANNING WESTERN BLOT COLORIMETRIC STAINED GEL 1 In Scanning Mode i lift the lid to open scanner 2 Place the sample to the center of the viewing area Close the lid 3 Slide the Light Selection Switch on the front side of the scanner to select the white light source for stained gel scanning 4 Set White Epi or White Back Light item through Functional Menu Please check LED Lightin
9. unctional option list again 17 Edit Mode s a a a When in Play Mode o press OK to get into functional option list D b Press right arrow button to choose Edit Mode s c Press down arrow button to get into Edit Menu Rotate Delete and select the desired setting item d Press right arrow button to get into setting mode Rotate Right 90 Delete No Left 90 Yes 180 Flip Horizontal Flip Vertical e Press up and down arrow button to select the desired setting Press OK to save the setting f Repeat step e for delete mode setting or press OK again to return to Play Mode 18 Preview Mode B28 ES a When in Play Mode press OK to get into functional option list DD Egje b Press right arrow button to choose Preview Mode H c Press down arrow button to get into Preview Menu 1 X 1 2 X 2 3 X 3 and select the desired setting item Preview Mode 1X1 Display 1 image at a time 2X2 Display 4 images at atime 3X3 Display 9 images at a time d Press OK button to save the setting e The captured images will display on the screen based on the selected preview format setting Set Up Mode WY Same as the Set Up Mode described in Function Descriptions I on page 11 19 Hardware Specifications I Image Capturing Unit Sensor CMOS Sensor Resolution 9M Pixels Exposure Time 0 2 10 1
10. w button to choose Exposure Mode c Press up or down arrow button to choose the desired exposure level When the desired exposure level is selected press OK to get back to Scan mode BW Color Switch Mode a When Gi icon displays on top left corner of the screen press OK to get into functional option list b Press right arrow button to choose BW Color Switch Mode Press up or down arrow button to choose to select the desired display mode B amp W B amp W invert d Press OK again to return to Scan Mode The default setting of the scanner is Black amp White 13 Set Up Mode WY a When o icon displays on top left corner of the screen press OK to get into functional option list 7 b Press right arrow button to choose Set Up Mode C Press down arrow button to get into Setup Menu and select the desired setting item d Press right arrow button to get into setting mode Then press up and down arrow button to select the desired setting Press OK to save the setting e Press down arrow button to select other setting mode or press OK again to return to Scan Mode Setup Menu and related setting items a LCD Dark Normal Bright b Display LCD VGA c Video Output 800x600 1024x768d d Filename Setup Filename e Save Format TIF JPG BMP JPG is default setting f Quick View 1 sec 2sec 3 sec
Download Pdf Manuals
Related Search