H2O IR - MCM Electronics
Contents
1. User Instructions 6 15 2015 ADJ Products LLC all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ADJ Products LLC logo and identifying product names and numbers herein are trademarks of ADJ Products LLC Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ADJ Products LLC brands and product names are trademarks or registered trademarks of their respective companies ADJ Products LLC and all affiliated companies hereby dis claim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe unsufficient and negligent as sembly installation rigging and operation of this product Europe Energy Saving Notice Energy Saving Matters EuP 2009 125 EC Saving electric energy is a key to help protecting the enviroment Please turn off all electrical products when they are not in use To avoid power consumption in idle mode disconnect all electrical equipment from po2. See below To control the fixture you must aim the remote at the front of the fixture and be no more then 30 feet away STAND BY Pressing this button will blackout the fixture FULL ON This button is invalid for the fixture FADE GOBO Press this button to run or stop the effect wheel DIMMER and DIMMER These buttons adjust the output in tensity STROBE This button is invalid for the fixture COLOR Press this button to rotate or stop the color wheel 1 9 These buttons are invalid for this fixture SOUND ON amp OFF These buttons are invalid for this fixture SHOW 0 This button is invalid for this fixture H20 IR Photometric Chart 43 1900 905 485 280 143 LUX 34 2320 930 505 290 186 n m E E E es S E S a es LF CH a ee ee ee O ql UM ST Distance m 0 1 0 2 0 3 0 4 0 5 0 ADJ Products LLC www adj com H20 IR Instruction Manual Page 6 H20 IR 43 Degree Lens Install The install of the 43 Degree lens is a pretty easy process Please be very carefull when doing this install Unscrew and remove the focus lens Using your thumb gently push the lens outward until it pops out When the lens pops out the pic ture to the left is what you should see Remove the lens and retainer ring Flip the focus lens barrel over and insert the lens Carefully insert the retainer ring Please do this very carefully Make sure retainer ring is in correctly
3. 6 month limited warranty e L E D Products 2 year 730 days Limited Warranty excluding motors PCB boards and power supplies which have a 1 year 365 day Limited Warranty batteries which have a 180 day limited war ranty Only the L E D s carry a 2 year warranty excluding StarTec Series which a carries a 1 Year Limited Warranty e ADJ DMX Controllers 2 Year 730 Days Limited Warranty excluding faders and tact switches ADJ Products LLC www adj com H20 IR Instruction Manual Page 9 H20 IR Specifications MODEL H20 IR VOLTAGE 120V 60Hz or 230V 60Hz LED 1X 12W LED POWER CONSUMPTION 23 8W DIMENSIONS 9 25 L x 9 W x 7 25 H 236 x 229 x 187mm WEIGHT 7 7 Lbs 3 5 Kgs FUSE 1 Amp WORKING POSITION Any Safe Position BEAM ANGLE 34 Degrees or 43 Degrees COLORS 5 Colors White amp Split Color WARRANTY 2 Years 730 Days Auto Sensing Voltage This fixture contains a automatic volt age switch which will auto sense the voltage when it is plugged into the power source Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice ADJ Products LLC www adj com H20 IR Instruction Manual Page 10 ADJ Products LLC 6122 S Eastern Ave Los Angeles CA 90040 USA Tel 323 582 2650 Fax 323 725 6100 Web www adj com E mail info americandj com A D J Supply Europe B V Junostraat 2 6468 E
4. be written down on a piece of paper and included in the shipping container If the unit is under warranty you must pro vide a copy of your proof of purchase invoice You may obtain a R A number by contacting customer support at 800 322 6337 H20 IR The unit should be mounted using a mounting clamp not provided affixing it to the mounting bracket that is provided with the unit Always ensure that the unit is firmly fixed to avoid vibration and slip ping while operating Always ensure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times the unit s weight Also always use a safety cable that can hold 12 times the weight of the unit when installing the fixture The equipment must be installed by a professional and it must be installed in a place where it is out of the reach of people s grasp Warranty Registration Installation ADJ Products LLC www adj com H20 IR Instruction Manual Page 3 H20 IR Safety Precautions To reduce the risk of electrical shock or fire do not expose this unit rain or moisture Do not spill water or other liquids into or on to your unit Do not attempt to operate this unit if the power cord has been frayed or broken Do not attempt to remove or break off the ground prong from the electrical cord This prong is used to reduce the risk of electrical shock and fire in case of an internal short Disconnect from main power before making any
5. W Kerkrade Netherlands service adjgroup eu www adj eu Tel 31 45 546 85 00 Fax 31 45 546 85 99 Follow Us On HOM facebook com americandj twitter com americandj youtube com adjlighting
6. e product If any accessories are shipped with the product ADJ Products LLC shall have no liability whatsoever for loss of or damage to any such accessories nor for the safe return thereof C This warranty is void if the serial number has been altered or removed if the product is modified in any manner which ADJ Products LLC concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the ADJ Products LLC factory unless prior written authorization was issued to purchaser by ADJ Products LLC if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not include maintnance cleaning or periodic check up During the period specified above ADJ Products LLC will replace defective parts at its expense with new or refurbished parts and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of ADJ Products LLC under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of ADJ Products LLC All products covered by this warranty were manufactured after August 15 2012 and bear indentifying marks to that effect E ADJ Products LLC reserves the right to make changes in design and or improvements upon its products without any obligat
7. flesh against the lens Now you can screw the focus lens back into the H20 IR ADJ Products LLC www adj com H20 IR Instruction Manual Page 7 H20 IR Fuse Replacement Fuse Replacement Locate and remove the unit s power cord Once the cord has been removed located the fuse holder located inside the power socket Insert a flat head screw driver into the power socket and gently pry out the fuse holder Remove the bad fuse and replace with a new one The fuse holder has a built in socket for a spare fuse be sure not to confuse the spare fuse with active fuse Warning If after replacing the fuse you continue to blow fuses STOP using the unit Contact customer support for further instructions Con tinuing to use the unit may cause serious damage H20 IR Cleaning Fixture Cleaning Due to fog residue smoke and dust cleaning the internal and external lenses should be carried out periodically to opti mize light output 1 Use normal glass cleaner and a soft cloth to wipe down the out side casing 2 Clean the external optics with glass cleaner and a soft cloth every 20 days 3 Always be sure to dry all parts completely before plugging the unit back in Cleaning frequency depends on the environment in which the fixture operates l e smoke fog residue dust dew In heavy use we recom mend cleaning on a monthly basis Periodic cleaning will ensure lon gevity and crisp beam output H20 IR Trouble Shooting Listed belo
8. ion to include these changes in any products theretofore manufactured No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by ADJ Products LLC in connection with this product including warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall ADJ Products LLC be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product This warranty is the only written warranty applicable to ADJ Products LLC Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published MANUFACTURER S LIMITED WARRANTY PERIODS e Lighting Products 1 year 365 days Limited Warranty Such as Special Effect Lighting Intelligent Lighting UV lighting Strobes Fog Machines Bubble Machines Mirror Balls Par Cans Trussing Lighting Stands etc excluding LED and lamps e Laser Products 1 Year 365 Days Limited Warranty excluding laser diodes which have a
9. line visit http parts americandj com Warning To prevent or reduce the risk of electrical shock or fire do not expose this unit to rain or moisture Caution There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty In the unlikely event your unit may require service please contact ADJ Please recycle the shipping cartoon when ever possible ADJ Products LLC www adj com H20 IR Instruction Manual Page 2 H20 IR To optimize the performance of this product please read these operating instructions carefully to familiarize yourself with the basic operations of this unit These instructions contain important safety information regarding the use and maintenance of this unit Please keep this manual with the unit for future reference General Instructions H20 IR Includes Built In Hanging Yoke 5 Colors Plus White e Color Mixing 34 Degree Lens amp Optional 43 Degree Lens e ADJ UC IR Compatible Sold Separately Features H20 IR The H2O IR carries a two year 730 days limited warranty Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A num ber must also
10. roducts LLC www adj com H20 IR Instruction Manual Page 4 H20 IR Operating Instructions Operation This fixture is designed to operate as a stand alone unit and does not require a controller of any type The H2O IR was created to meet the demands of theatrical groups and production groups The desire was to create a low cost unit with an incredible effect without any strong flashing lights or special fog needs This unit comes with five built in colors that can be used to create a vari ety of unique effects This fixture is ready to be plugged in right out of the box When the unit is plugged into a matching power supply the lamp will strike and the unit s two internal effect wheels will immedi ately begin to turn On the rear of the unit there is a toggle switch that is used to control the internal color wheel When toggle switch is one position the color wheel will automatically and continuously scroll through the color wheel When the color wheel toggle switch is in the opposite position the color wheel will lock in place You can create a more dramatic effect by using split color combinations by stopping the wheel any where between two adjacent colors Focusing Lens The lens can be focused by turning it clockwise or counter clockwise to focus the lens to your desire ADJ Products LLC www adj com H20 IR Instruction Manual Page 5 H20 IR ADJ UC IR Control The UC IR infrared remote gives you control of various functions
11. type of connection Do not remove the cover under any conditions There are no user serviceable parts inside Never operate this unit when it s cover is removed Never plug this unit in to a dimmer pack Always be sure to mount this unit in an area that will allow proper ventilation Allow about 6 15cm between this device and a wall Do not attempt to operate this unit if it becomes damaged This unit is intended for indoor use only use of this product out doors voids all warranties During long periods of non use disconnect the unit s main power Always mount this unit in safe and stable matter Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to the point they exit from the unit e Cleaning The fixture should be cleaned only as recommended by the manufacturer See page 14 for cleaning details e Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances inclu ding amplifiers that produce heat The fixture should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged B Objects have fallen or liquid has been spilled into the appliance C The appliance has been exposed to rain or water D The appliance does not appear to operate normally or exhibits a marked change in performance ADJ P
12. w is a problem that you may encounter with a solution Trouble Shooting No light output from the unit 1 Be sure the fuse has not blown The fuse is located on the rear panel inside the power socket See Fuse Replacement ADJ Products LLC www adj com H20 IR Instruction Manual Page 8 H20 IR Warranty MANUFACTURER S LIMITED WARRANTY A ADJ Products LLC hereby warrants to the original purchaser ADJ Products LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase see specific warranty period on reverse This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service you must obtain a Return Authorization number RA before sending back the product please contact ADJ Products LLC Service Department at 800 322 6337 Send the product only to the ADJ Products LLC factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty ADJ Products LLC will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in it s original package No accessories should be shipped with th
13. wer when not in use Thank you H20 IR Introduction Introduction Thank you for purchasing the H20 IR by ADJ Products LLC The H2O IR is an improvement of the very popular H2O LED This new unit has better optics and brighter LED output producing vibrant colors It can also be used with the ADJ UC IR sold separately This unit is suitable for theaters studios retail stores and other similar locations Unpacking Every H20 IR has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your units for any damage and be sure all accessories necessary to operate the system have arrived intact In the event damage has been found or parts are missing please contact our toll free customer support number for fur ther instructions Please do not return the system to your dealer with out first contacting customer support Customer Support ADJ Products LLC provides a toll free customer support line to pro vide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www adj com for any comments or suggestions Ser vice Hours are Monday through Friday 8 00 a m to 4 30 p m Pacific Standard Time Voice 800 322 6337 Fax 823 582 2941 E mail support americandj com To purchase parts on
Download Pdf Manuals
Related Search