J97272 blazar diamond handbook
Contents
1. Laser Safety Notes YOU MUST READ THIS LASER SAFETY INFORMATION Laser light is many thousands of times more concentrated than light from any other kind of light source and as so it poses a real danger to the sight This concentration of light can cause instant eye injuries primarily by burning the light sensitive portion at the back of the eye called the retina Even if you cannot feel heat from a laser beam it can still potentially injure or blind you or your audience Even very small amounts of laser light are potentially hazardous even at long distances Laser eye injuries can happen quicker than you can blink e Entertainment products split the laser beam into hundreds of smaller laser beams that are radiated out at high speed There is a misconception that an individual laser beam is safe for eye exposure This is not the case This product produces high levels of laser power Classified as Class 3B before it splits into multiple beams defined as Class 3R levels Many of the individual beams are potentially hazardous to the eyes and should never be directed into an audience at any time e Do not assume that because the laser light is moving it is safe It isn t and because these beams are being moved by a mechanical device it is possible for that device to stop moving and then direct the laser beam constantly at an individual Since eye injuries can occur instantly it is critical to prevent the possibility of any direct ey2. non abrasive cloth Do not use solvents or liquids to clean the product Mains Warnings e Always make sure that the mains voltage you intend to use is within the operating range of the product e Always unplug this product from the mains supply before moving cleaning etc e Make sure you replace the fuse with another of the same type and rating e This product will be irrevocably damaged and the warranty invalidated if connected to a power pack or other dimmer e Make sure the mains cable is not crushed or damaged e Never disconnect the mains lead by pulling or tugging on the cable e This appliance must be earthed Do not remove the earth connection in the plug or any other location it is essential for user safety Owner Handbook Blazar Diamond Lanta Lighting 2012 Terms Apply All trademarks are the property of their respective owners E amp OE All specifications and details are correct at time of print Revision 1 e Unplug the product from the mains during lightning storms or periods of mains fluctuations If the product is going to be unused for long periods unplug from the mains e There are no user serviceable parts inside the unit Do not open any covers or attempt to modify or repair the unit This will invalidate your warranty and may lead to damage or malfunction to the product and may create a hazardous situation and endanger life Physical Warnings e Always secure the product to a fastening device usi
3. 199 Adjust Wave Speed 200 255 Adjust Wave Amplitude 0 16 White 17 33 Red 34 50 Green 51 67 Blue 68 84 Yellow 85 101 Purple 02 118 Cyan 12 Colours 19 135 Red Green Blue amp White 4 Segemented 36 152 Blue Yellow Purple amp Cyan 4 Segment 53 169 White Red Green Blue Yellow Purple amp Cyan 7 Segment 70 186 White Red Green Blue 4 Colour Flow 87 203 Blue Yellow Purple amp Cyan 4 Colour Flow 204 237 Blue Yellow Purple amp Cyan 4 Colour Flow 238 255 Sound Activated Colour Change 0 63 ormal Display 13 Display Mode 64 127 Lightspot Display 128 191 Segmented Display 192 255 Dot Display Owner Handbook Blazar Diamond Lanta Lighting 2012 Terms Apply All trademarks are the property of their respective owners E amp OE All specifications and details are correct at time of print Revision 1
4. 221 Auto Mode 222 255 DMX Mode 2 Graphics Folder Selection 9295 ae a ai 0 10 No Strobe 3 Strobe File Selection 11 199 Auto Strobe 200 255 Sound Controlled Strobe 0 125 Manually Adjust Position 126 185 Auto Motion from Left to Right 4 X Move 186 225 Auto Jump from Left to Right 226 245 Auto Jumps 246 255 Audio Jumps 0 125 Manually Adjust Position 126 185 Auto Motion from Left to Right 5 Y Move 186 225 Auto Jump from Left to Right 226 245 Auto Jumps 246 255 Audio Jumps 0 10 N A 11 100 Manually Adjust the Size 6 Zoom 101 150 Enlarge 151 200 Narrow 201 255 Circular Movement 0 10 N A 7 Encircle X Axis Rotation 11 110 Manual Adjustment 111 255 Auto Rotation 0 10 N A 8 Encircle Y Axis Rotation 11 110 Manual Adjustment 111 255 Auto Rotation Owner Handbook Blazar Diamond Lanta Lighting 2012 Terms Apply All trademarks are the property of their respective owners E amp OE All specifications and details are correct at time of print Revision 1 Channel DMX Value Operating Mode 0 10 N A ae Cenie Axs 1 110 Manual Adjustment 11 255 Auto Rotation 0 10 N A 1 74 Manually Adjust Gradual Draw 75 104 Auto Adjust Draw increase 10 Gradual Draw 05 144 Auto Adjust Draw decrease 45 184 Auto Circular Draw 85 224 End to End Circular increase 225 255 End to End Circular decrease 0 9 N A 11 Wave 10
5. a 0 a L IGHTIg olglo elolel J wan 3lazar Diamond B 1W ILDA DMX Full Colour laser can Lanta Blazar Diamond BEFORE YOU BEGIN It is important that you carefully examine the packaging to ensure the product has not been damaged during shipping If you are satisfied the packaging appears undamaged carefully unpack the product Please keep all of the packing materials in case you need to transport the device pass it on to a new owner in the future or return it for some reason Please examine the product and accessories to ensure they have arrived with you in good condition and show no sign of damage If you suspect the product may be damaged DO NOT USE IT Please notify the sender immediately for advice not the manufacturer Essential Safety Notes Please read the following notes carefully because they include important safety information about the installation operation and maintenance of this product General e Read all instructions in this User Manual and on the product carefully BEFORE operating this device e Keep this User Manual for future reference and pass it on to any other user or future owner e This product is for indoor use only Under no circumstances must it be used outdoors e To prevent risk of fire or shock do not expose this product to rain or moisture e Make sure there are no flammable materials close to the unit during operation e Clean the product with a clean and dry
6. are the property of their respective owners E amp OE All specifications and details are correct at time of print Revision 1 Operation of the Lanta Blazar Diamond CCAA O INDOOR USE ONLY DMX OUT ILDAIN E o amp CE oct el ILDA OUT MODE DOWN Mi MAX o Q SD MMC DMX IN 85 265VAC 50 60H2 Q 1 23 4 5 6 7 89 10 11 12 13 14 15 1 Digital Display 2 MODE Mode switch button press the button to switch to another mode 3 SD MMC card 4 DOWN key page down in ILDA amp PRG mode 5 UP key page up in the PRG amp ILDA mode 6 DIR key In PRG amp ILDA mode change the working folder In any mode pressing more than a second saves the current work status such as mode working folders work files Microphone Receive music audio Sound sensitivity knob 9 Zoom function Customise the size of your image ILDA OUT ILDA output interface ILDA IN ILDA input interface IN DMX signal input OUT DMX signal output F3AL 250V AC three pin socket POWER ON OFF o N NSAONDNO Owner Handbook Blazar Diamond Lanta Lighting 2012 Terms Apply All trademarks are the property of their respective owners E amp OE All specifications and details are correct at time of print Revision 1 MODES Prg Mode Playlist mode play PRG file the second line shows the current play list name
7. ct at time of print Revision 1 Product Quality amp Compliance Products from Lanta Lighting meet all required safety standards in force at the time of manufacture and are fully compliant with them Manufacturer Warranty e This Manufacturer Warranty is valid in the UK only e Lanta Lighting warrants that this product is free from workmanship defects and material failure during normal use and operation for a period of 12 months from first use or from original date of sale whichever is the earliest providing all of the terms indicated in the warranty section have been fully complied with e Expressly excluded is our liability for any directly connected or indirectly connected item or items or any consequential loss associated with the failure of the product howsoever caused e lf the product has been opened modified tampered with incorrectly connected used inappropriately or in conflict with the instructions herein or the product model or serial number has been damaged removed tampered with obliterated or made partly unreadable by any person or persons the Manufacturer Warranty is irrevocably null and void e No extension adaption alteration or modification to the terms of this Manufacturer Warranty will be permitted unless expressly authorised in writing excluding email and fax by a Director of Lanta Lighting Warranty is transferrable during the Warranty period For Further Information about Lanta Lighting Our websit
8. e can be found at www lantalighting com and is available for the benefit of customers worldwide Please consult for information advice and support on this and other high quality products from Lanta Owner Handbook Blazar Diamond Lanta Lighting 2012 Terms Apply All trademarks are the property of their respective owners E amp OE All specifications and details are correct at time of print Revision 1 About Lanta Lighting Based in the UK Lanta are committed to providing high quality products at cost effective prices to the professional lighting market Since the first product was launched in 2006 Lanta has established a reputation for reliability common sense design and customer support that has become the envy of others All Lanta products are specifically designed for UK operation and are optimized for 240V AC 50Hz UK mains power The Lanta Lighting range includes Professional Lighting Focusing on the use of LED technology Lanta offer distinctive lighting effects for install and mobile applications From washes to floods spots to projectors LED technology now outperforms traditional lights while at the same time requiring significantly lower power and generating far less unwanted heat Performance Lasers Recent advances have reduced the costs of Lasers made them more portable and brought improved performance and reliability With step and animation lasers in multi and single colour formats for mobile DJs and sta
9. e exposure e It is illegal to aim a Class 3R laser into an area where people could be exposed even below people s eye level e Always install a laser effect to ensure that the entire laser light radiation is at least 3 meters above the floor on which people can stand It is very important to test the laser before any public use e Do not use if any defect is detected such as if the product emits only one or two laser beams rather than the expected quantities as this could indicate damage to the product and could allow emission of higher laser levels above Class 3R e Do not point lasers at any reflective surfaces such as windows mirrors and metal truss or other reflective fixtures as even laser reflections can be hazardous e The operation of a class 3R laser show is only allowed if the show is controlled by a skilled and well trained operator familiar with the data included in this manual e The law is updated from time to time and it is the users sole responsibility to understand the legal obligations and responsibilities in force at the time and location of use We recommend visiting the Government Health amp Safety website http www hse gov uk or search for Controlling the radiation safety of display laser installations for further information Owner Handbook Blazar Diamond Lanta Lighting 2012 Terms Apply All trademarks are the property of their respective owners E amp OE All specifications and details are corre
10. ng a safety chain e If the product appears to be malfunctioning or operating in an unexpected manner stop using the unit immediately and contact your supplier e Never lift move or carry the product by any other means other than the case as a whole or handle if provided Laser Warnings e Lasers are hazardous devices Permanent eye injury and blindness is possible if lasers are used incorrectly e Avoid direct eye contact with laser light e Never intentionally expose your eyes or others to direct laser light e This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes e Itis illegal and dangerous to shine this laser into audience areas where the audience or other personnel could get direct laser beams or bright reflections into their eyes e It is illegal to shine any laser at aircraft e Never leave this device running unattended Non Interlocked Housing Warning e This unit contains hazardous voltages moving parts and high power laser emitters e Do not open the laser housing to avoid potential exposure to unsafe levels of laser radiation e The laser power levels accessible if the unit is opened can cause instant blindness skin burns and fires Owner Handbook Blazar Diamond Lanta Lighting 2012 Terms Apply All trademarks are the property of their respective owners E amp OE All specifications and details are correct at time of print Revision 1
11. ort up to 20 folders each folder can store up to 256 ILDA files amp 10 PRG files DMX Mode It is possible to operate the Lanta Blazar Diamond from a remote location by using either a DMX controller or a PC or laptop with a DMX interface Lanta products use a 3 pin XLR style connector and usually have an input and output DMX connector This allows multiple lighting products to be daisy chained together to build a display controlled by just one cable back to the DMX controller NOTE In larger installations there may be limitations regarding the maximum length of DMX cables and the maximum number of devices that can be used in one daisy chain or node NOTE It is often desirable to terminate the last device on the node to minimize noise and interference Interference on a DMX network can make some lighting products to behave erratically this is most noticeable with moving head or other motorized products This is not a fault with the lighting product Owner Handbook Blazar Diamond Lanta Lighting 2012 Terms Apply All trademarks are the property of their respective owners E amp OE All specifications and details are correct at time of print Revision 1 Please see your DMX controller handbook for further details Channel DMX Value Operating Mode 0 36 shut Off 37 110 PRG Mode PS 111 147 ILDA Mode 148 184 Sound Mode 185
12. press UP and DOWN to change the playlist press the DIR key to change the current working folder ILDA Mode ILDA playback mode shows a single ILDA file file extension ILD not case sensitive the second line displays the current playback ILDA file name press UP and DOWN to change the ILDA file press the DIR key to change the current working folder Audio mode Sound mode shows the audio controlled internal program press UP and DOWN to change audio programs Auto Mode Automatic mode Plays internal automated programs Dmx Mode Control your fixture from using a DMX unit Slave Mode Master slave controlled by master unit Phase Set Phase settings press UP and DOWN to change the phase SD CARD SETUP The SD card comes loaded with a selection of standard dynamic animations that can be accessed via the laser in ILDA PRG mode The software allows the user to create and modify the SD it will NOT provide ILDA control 1 The system only supports a FAT32 file system if using a new SD Card format it to FAT32 first 2 This system supports short file names only file names including the folder name are up to an 8 bit file name and 3 extensions File names and extensions can consist of letters numbers and underscores however cannot exceed more than 8 bit e g SHOW_SP1 3 Your SD card needs to be a dedicated card DO NOT store other files onto the SD Card Your SD Card can supp
13. tic installs Lanta promise Lasers that won t burn a hole in your pocket Atmospheric Effects When you need special atmospherics effects Lanta have everything from bubble machines to snow machines hazers and foggers There s also a range of fluids and consumables specially designed to get the best from the range Control Gear Lightweight and portable Lanta Control Gear is robust enough to survive life on the road and smart enough to control DMX kit whatever the venue Visit us at www lantalighting com for more details Owner Handbook Blazar Diamond Lanta Lighting 2012 Terms Apply All trademarks are the property of their respective owners E amp OE All specifications and details are correct at time of print Revision 1 Features of the Lanta Blazar Diamond The Lanta Blazar Diamond is an RGB 1W ILDA DMX full colour laser An ideal product for fixed installations and portable use A range of features can be DMX controlled from any of the Lanta DMX controllers or equivalent products or sound to light Laser Power Red 300mW Green 200mW Blue 500MW Scan Angle 157 Control Sound Auto ILDA DMX 13 channels Control Connections 3 pin Female XLR socket 3 pin Male XLR socket ILDA In Out SD MMC card slot Power Requirement 240 Volt AC 50 60Hz Dimensions 330 x 370 x 125mm Weight 7 1kg Owner Handbook Blazar Diamond Lanta Lighting 2012 Terms Apply All trademarks
Download Pdf Manuals
Related Search