Home

CMS User Manual

1. Local Alarm Config box set Alarm Holding Time Post alarm record time Alarm processing function and User define vil In the Log List Maintain box set the parameters for alarm and operator logs vill In the Other Config box user can do settings for serial port and time ix User can set control center time by manually or by selecting Synchronize with PC time x The PC Restart Config box allows setting parameters for restarting the PC automatically If activated the user will be able to input login username and password of the PC and the frequency and time for restarting the PC 4 3 2 2 Local Schedule Configuration Schedule recording means recording as per a fixed schedule In local Schedule Config interface users can set weekly schedules for each channel The user can set time periods for each day of a week Configuration Steps Week Schedule Configuration i On Local Configuration interface select Local Schedule Config tab and it will display Local Schedule Config interface li Select a camera from the device list to configure the schedule and click ES button iii Select a day of the week and then drag the mouse to select a time zone User can create multiple time zones for a particular day 1 Z 3 4 5 5 T 3 a 10 141 12 13 14 15 16 17 18 19 20 21 22 23 49 Nh Notice Ruler means 24 hours in a day The least time frame that can be selected is 15 minute
2. Add Sibling Nodes User can add E Maps under the same parent map as Sibling Configuration Steps i Inthe Map config interface right click on an existing map li Select Add Sibling Node and then a dialogue of Add Map will pop up iii Input name of the map iv Inthe Path box click E button and the Open dialogue will pop up v Select the path to save the E Map and click Open button to confirm the path vi Click Confirm button to add map in the map control center successfully Add Sub Nodes A sub node can be added to an existing E Map Configuration Steps i In the Map Config interface right click on an existing map li Select Add Son Node and Add Map dialogue will pop up iii Input the name of the map iv In the path box click GS button and Open dialogue will pop up v Select the path to save E Map and click Open button to confirm the path vi Click Confirm button to add map in the map Control Center Modify Map Names User can modify E Map names Configuration Steps i Right click on a map and select Modify Node Name li Modify the name of the map and click to save the modifications Delete Sub Nodes A user can also delete Sub Nodes Configuration Steps i Right click on an E Map and select Delete li A confirmation box will pop up Confirm to delete NY Notice Deleting a Map would automatically delete all sub nodes S
3. CMS User Manual For H 264 Digital Video Recorder All rights reserved INTOdUCHON ii A Id ut cue 1 AAA me E nn E E E E E 1 2 1 System Redurre MeN PAP nn N a aneannseiecectes E E E 1 2 2 Computer Hardware Require menk arasodes a a a a 1 2 3 ANSIOSO e o S 2 2 4 Uninstalling Ahe Se O 3 EOI AE das 4 3 1 A aaa i a eoluadd Mela a aa a aa Ea 4 3 2 asa tds 6 FUNGHONS amp Op ratioNS ii A ci 6 4 1 O EAA RE nen E E E S ETN 6 4 1 1 Loca Unicas 6 4 1 2 Minimizes cs A OO 6 4 1 3 A A da 6 4 1 4 aaa 8 4 2 O O Aa E sas tu atace nana aay caataweatc ea anna ee Sh E A E A a uates mand AE 8 4 2 1 ZAC OM GUANO sea dea teo Lo 11 4 3 SY SLSM COMMU ON ese oo 12 4 3 1 Device Nf ats 0 2 gemeeencenmre ere eee Err RECR RRC E oa en re 12 4 3 2 local MGalailelcciile qe tere ee terre eer ee eee nr emer Teer ere rn tern ree ee ce eres ee Tee ee ee 15 4 3 3 SEN GON MOUPAN OMe Sa oo 17 4 3 4 Map COUNT orabseauaavacsan near cnc av A RAN 17 4 3 5 US Managerni a sE N a EEN E NT Na NN NE oe AA E A aA oe Pee 19 4 3 6 EOG OY a a a a a a aa a a a GaAs 20 4 3 7 EXPO e pOr Local CONN oleo A N N aa add A 20 4 4 ER ET S PRA A E E A A E E E A A N ma anita E A T S 20 4 4 1 GRange ICON c aunn a e A RA E O A EN 20 4 4 2 Delete CANIS Ia aces gees A A AA 21 4 4 3 Map Alar na e aa a a NA A a a A rn ee 21 4 5 Mn NO 21 4 5 1 video Play ACK A A 21 4 5 2 VideO BACKUP ss ais ana aE E a 23 Use Method for NATAL a a a E aas 24 TROUDIESROOUUING PERe EE E E AE A E E E E
4. System Configuration Configuration E Map User Manager Log Query and Decoder Card Function List Device Manager Local Configuration Server Configuration Map Config User Manager Log Query Export amp Import Local Config 4 3 1 Device Manager User can add regions groups and devices to manage all DVRs in the network Once the regions groups and devices are added they would be displayed in Device List Function List Add Region Add Group Dwell Setup Add Device Modify Delete 4 3 1 1 Add region User may set regions A region is used to indicate the location of a particular device Configuration Steps l i Click Device Manager u in system configuration menu It will display Device Manager interface Click ra iL button It will pop up Add Region dialog box Input the region name in Region textbox Digital Video Recorder CMS User Manual lil Click OK button It will display the added region in Device List Notice In order to add a sub region user first has to select the parent region and then add the sub region By default a new region is added under Global region 4 3 1 2 Add Group Channel Group is used to create a group of cameras Configuration Steps Li i Click IO button in Device Manager interface to pop up Add Group dialog box li Input group name in Group Name textbox lil Click OK button to create the group Once the group is added it will be
5. Verify button to pop up a dialog box Yerify passwo User Name Input the password to handle the alarm event Alarm event A Device name Alarm type Time Status Werify Cloze name Sensor Alarm 2011 11 03 16 50 24 After the event is verified please click Close button and then verify password again to input remarks Digital Video Recorder CMS User Manual Ln Remarks Remarks Mas char 200 Device name Cloze File linker Then click OK button 4 1 4 System The system tab displays the Camera Display List which is used to display the added devices User may Click Device List or Camera Group page to switch to display mode Fig 4 2 refers to the DVR aligned according to the device list User may drag device from the Device List to the operation area for the GUI setup Fig 4 3 displays the DVR aligned according to the camera list User may drag the group to the operation area to watch all cameras of this group SYSTEM s Group 0 el H CAMO CC CAMO it CAMO sce O CAMO gt q AMT ii O omni 2 Camo Caron O CAMO Device List e gee Channel Group Fig 4 2 Device List Fig 4 3 Camera Group Please refer to section 4 3 1 for adding regions group or devices etc SE NY Notice Before switching the display mode user needs to click button first to turn off live display Preview The Live section of the interface provides toolbars for viewing the differ
6. 16211 66 DAA 13271651169 ae 1216411563 WR 121681174 DA 121621182 DAR 1321651155 DAR 132 tE TT WR 1216411145 DA 122162 11 145 DAFO 1216511147 naka a a A 12 16211 221 whak 11n 5 25 255 0 ood de ee 20 fe 000 0 25 208 258 0 204 295 255 0 fo diet Oo 20 209 290 0 25252380 P ood aoe el ak Poe oO 8 28 38 0 ono 255 255 0 25 258 295 0 TSE TBE 11 1 16165111 142164 11 1 142168 11 1 1755 11 1 15021655 11 1 112162 11 1 192168 11 1 12168 11 1 132168111 112168 11 1 142162 11 1 12758 11 1 1500165 31 1216241 1216231 1160 116 gE 30060 49 A E E 034 7658 1 90 GaSe Ase 0 WIRES TAH CAE S01 0034 ETIA Sa Pe Se 01 23 00 22 ae Se MI EPO I CAE 201455 Giese AA ED MBE STOKES HO 2D Obs MEDIAS PS MIDEN will display on desktop Double click the Deme Types Fireya vermorn Budd kama IP Tool icon and an Click OK button and start the IP Tool Refer to the picture below The device can be searched on net If it can t be searched please check the accession of PC and device gt IP Tool If no any devices found please make sure that you don t run ControlCenter software Device name name IP Address 192 168 11 45 255 255 255 0 l Subnet Mask Gateway 192 168 11 1 9008 Data Port MAC 00 18 4E 30 EE 0A Device Type IP Camera Firmware version Build 1 1 2 30806 kernel 20090609 DevVer 1 1 When upgrading the program and kernel the IP
7. Y Snap picture number 5 el IPG v Title Device amp Channel Nan Record Contig Partition Free Space Total Size Facies ecard Record partition CA 24 28 G 37 56 G DA 4453 58 59 G E 43 46 G 58 59 G M Fs 62 78 G 78 12G Local Alarm Config Alarm Holding Time 30 Seconds v Post alarm time S 1 Minute v Alarm processing functior Sensor amp Motion alarm v User def name video loss F Alarm outt Log List Maintain Alarm log list save Half a Month v Operator log save One Week v Show Alarm Event list Other Config Serial Port NULL v BaudRate 4800 Y Time Synchronize with PC time PC Restart Config User Name o Per day Days CI PC Auto Restart E Password Restart Time Fig 4 10 Local Basic Configuration Digital Video Recorder CMS User Manual In the Local Basic Configuration interface user can configure parameters for live image display recording local alarm log list and PC restart The user can also view the version of the software Configuration Steps i Inthe System Config menu click Local Config icon li The Local Config screen would be displayed iii Select Local Basic Configuration tab iv Inthe Live Config box set values for Dwell Time Snap picture number and format as well as Title v Inthe Record Config box user can enable or disable the record recycle and select the default partition for saving the recorded files vi Inthe
8. address of PC and device should be at the same network segment If the network segment is different user should change the IP address by selecting the device and right clicking network setup 24 Digital Video Recorder CMS User Manual name 192 168 11 45 255 255 255 0 192 168 11 1 9008 00 18 4E 30 EE 04 IP Camera 1 1 2 90806 20090609 1 1 192 168 11 48 PARABRPARN 192 168 11 1 9008 00 18 4E 30 60 49 IP Camera 30801 18822365 11 name 192 168 11 53 browse with IE 168 11 1 9008 00 18 4E 30 FF 53 IP Camera 1 1 2 90806 20090609 1 1 DYR 4 192 168 11 64 network setup 168 11 1 2000 00 34 78 58 1F 9D DYRA 2 6 6 beta3 20090717 20080912 1 2 DYR 192 168 11 66 Update Software 168 11 1 2000 00 18 4E 20 2E 21 DYRA 2 6 6 beta3 20090710 20080912 1 2 DYR 192 168 11 68 168 11 1 2000 00 18 4E 51 23 44 DYR 2 6 6 beta3 20090710 20080912 1 2 Update Kernel 1 1 name 192 168 11 69 168 11 1 9008 00 18 4E 30 01 3B IP Camera 1 1 2 90806 20090609 Modify IP address dialog box will appear like below E IF 1932 168 11 de Subnet Mask 255 255 25 0 1932 168 11 1 Gateway User Name admin Tip Please check if password i correct when ddress setup fails Modify IP address and click OK button to exit the dialog box IP Tool will display the new IP address Select the device and right click Update software as shown below Update Software IF 192 168 11 48 Fort User Name Password I Update File ents
9. from the map t Notice The above mentioned steps must be made after a user has added E map and camera in the map configuration interface 4 4 3 Map Alarm Map alarm refers to a visual alarm in the E Map Once the camera is it would blink when in an alarm condition However this will involve linking the camera with the alarm event in the Local Config The schedule for the alarm type should be set in Server Config Configuration Steps i Enter into E Map interface li Select a map from the map tree iii Double click on the blinking camera to view the live images iv Click Exit button to exit the display of live images If a user selects Auto preview when alarm item in the map configuration interface the live image will automatically pop up when in an alarm condition Only 16 alarm pictures are allowed to pop up If a user selects Auto switch alarm map item in the map configuration interface the alarm map will be displayed when you enter into the E map interface User can right click on the map alarm display area for the following operations Return to parent map return to parent map from a sub map Full Screen for a full screen mode it can be displayed on the primary monitor or the secondary monitor Exit Full screen click Exit Full screen to exit from full screen mode 4 5 Video Search Click Video Search tab from the main taskbar to access the interface The main functions of video s
10. to a maximum of 9 channel mode Dwell means to display live images from different cameras in a sequence according to sequence of the DVR in the Camera Group The images may be displayed as a single channel or in a grid fashion from different cameras The Dwell icon feature will only be activated when the current display mode is not able to display the all the cameras listed under a particular camera group Dwell Group button Notice Dwell Group means to view the images of a group of cameras This is activated only if the Dwell Setup is done in System Config f used the interface would dwell between the image groups as per the setup done in System Config Digital Video Recorder CMS User Manual Pre Group Next Group button The Pre Group Next Group buttons are used to toggle between the channels of a group when the set display mode is not able to display all the channels of the group Setup steps Enter into System Config interface add devices on the left window first then add eii groups under Channel group column and fainlly add channels for each group Click icon select groups to dwell and then set up the time to dwell Switch to Preview interface gt Channel Group double click or drag the channel group to the right window to preview all images of channels Select screen mode less than 64 screen modes Now user can see all images of channels in this group through Pre Group Next Group button Manual alarm
11. A A E E E E E E E 27 Digital Video Recorder CMS User Manual Table of Contents Digital Video Recorder CMS User Manual Preface Central Management Software is a typical client management program providing a common platform to centralize all devices to attain a single unified system This greatly improves the efficiency of control and operation for all digital video recorders IP cameras etc through the network This manual will help you to familiarize with the software and master its operation methods Here we will take DVR connection for example The users can use this CMS to control monitor and manage multiple DVRs remotely Digital Video Recorder CMS User Manual 1 Introduction Central Management Software is a client application designed specially for embedded digital video recorders network video servers IP cameras and software compressed cards for remote centralized management of multiple devices In the video surveillance system the administrator can control video input devices and configure cameras PTZ view live images record take backups etc It possesses three main functions preview the live site system configuration and video search Covered in section 4 2 Installation 2 1 System Requirement Supported Operating System Windows XP Windows XP SP2 or latest Directx 9 0c or higher Windows 2000 Windows 2000 SP4 Directx 9 0c or higher Windows 2003 Windows 2003 server Directx 9 0c or higher Windows Vist
12. Polk os Top replay Ba baldas checks Het Tig etal isa dinei ode ok Barros and pe aria obja Fig 2 2 Choose the Installation Destination d The default destination folder for installation is C Program Files user can use Browse button to change the destination path Once the path is selected click Next to enter the next step Digital Video Recorder CMS User Manual Selec Program E odio Pit i ee ee da Li di rara GP ile ora Fears eii dan ll Cie Peed conan Erazo Coral Erea e Click Next to start the installation jotta Cede ri Par eam Filas La et i ad Cee Dini Fra ui ae Tea Fig 2 5 Setup Complete f The installation is completed 2 4 Uninstalling the Software There are three methods to uninstall the software 1 User can uninstall the software from Add or Remove programs 2 User can remove the software by using Uninstall icon from the windows menu Start gt Programs gt ControlCenter gt Uninstall 3 The program can also be removed by running the software setup and then opting for Remove option Digital Video Recorder CMS User Manual Welcome Modify repair or remove the program Welcome to the ControlCenter Setup Maintenance program Thie program lets you modify the current installation Click one of the options below Select new program components to add or select currently installed components to remove Reinstall all program component
13. a Windows Vista Directx 10 0c or higher Windows 7 Windows 7 SP2 Directx 10 0c or higher Supported Browser Microsoft Internet Explorer v6 0 IE 6 0 with most updated service pack Microsoft Internet Explorer v7 0 IE 7 0 with most updated service pack 2 2 Computer Hardware Requirement Recommended PC Specifications 4 channels ttem Specification S Memory Recommended PC Specifications 8 channels tem Specification Recommended PC Specifications 16 channels tem Specitication HDD 250GB Digital Video Recorder CMS User Manual NY Notice The mentioned specifications are provided considering CIF real time resolution The AMD chip hyper 3800 and X64 series are not tested For real time live view with CIF resolution max 25 channels can be played concurrently For real time view with D1 resolution max 6 channels can be played concurrently 2 3 Installation Process a We recommend that the anti virus software is disabled before initiating the installation In addition the setting of your IE browser must be enabled to download activeX components b Run the Setup exe from software CD and the following menu will pop up Aldo as d Cir dr ita Um pogo ll rola Corolle or pra ica 1 HA A all a reckon page bala ues ae eu eo Fig 2 1 Welcome Screen c Click Next to enter the next step Dhscad Desin li n Leraian Esiri hidis piee Tep i ares nll bles E ei a ee a e
14. a group list select the group and click button It will pop up Modify Group Info dialog box Input new group name in Group Name textbox Click OK button to modify the group name iii Modify Device In device list select the device and click button It will pop up Modify Device Info dialog box 14 Digital Video Recorder CMS User Manual Input new device name in Device Name textbox Click OK button to modify the device name User can also modify the username and password for the device iv Modify Channel P Input new channel name in Channel Name textbox In device list select group name and click button It will pop up Modify Channel Info dialog box Click OK button to modify channel name User can also select the network stream for the channel using the dropdown box Master Second stream 4 3 1 6 Delete Users can delete regions groups devices and channels Steps i Select the region the group the device or the channel to be deleted li Click Mm button and a confirmation box will pop up ili Click Yes button to delete the item 4 3 2 Local Configuration Click Local Configuration to enter the submenu This interface has 3 tabs Local Basic Configuration Local Schedule Configuration Local Alarm Configuration 4 3 2 1 Local Basic Configuration Local Basic Config Live Config Dwell Time 10 Seconds
15. and SettingsadminDesktop 1 1 2 090801 7 Erowze f Update Software Click Update start upgrading and the progress bar will display as shown below When upgrading doesn t disconnect PC to device make sure power is on Update Software IF Fort User Name Password Update File CA Document and 5 25 Digital Video Recorder CMS User Manual When upgrade is finished a massage box will pop up like below Update Software IF 192 168 11 48 Fort User Hame Password indais Fie CAD ktops1 1 2 0908014T Update Software Cancel Click OK button Exit the update dialog box and the device will restart automatically Select the device Right click Update kernel and a dialog box will appear as below name 192 168 11 45 255 255 255 0 _ 192 168 11 1 3008 00 18 AE 30 EE 0A IP Camera 1 1 2 90806 20090609 11 ie A e a008 IP Camera 90801 18822365 name 192 168 11 53 9008 00 18 AE 30 FF 53 IP Camera 1 1 2 90806 20090609 1 1 DVR4 192 168 11 64 network setup 2000 00 34 78 58 1F 9D DVR 2 6 6 beta3 20090717 20080912 1 2 DVR 192 168 11 66 Update Software 2168 11 1 2000 00 19 4E 20 2E 21 DVR 2 6 6 beta3 20090710 20080912 1 2 DVR 192 168 11 68 Ie 168 111 2000 00 18 4E 51 23 44 DVR 2 6 6 beta3 2009071020080912 1 2 name 192 168 11 69 eh el 9008 00 18 AE 30 01 3B IP Camera 1 1 2 90806 20090609 1 1 Update Kernel IP 192 168 11 45 Fort 3008 User Name admin U
16. button You shall self define it first in the local basic config tab Enter into System Config gt Local Config gt Local Basic Config tab check the user define box in the field of Local alarm config input the alarm name and check the alarm out box Go back to the Live interface and the manual alarm button will be seen Click this button to allow manual alarm Users can right click on the live preview picture for the following operations Turn off the live To turn off live picture display from current channel Start Manual Record To start recording for the current channel If the preview is stopped then the recording of the channel would also stop Stop Manual Record Stop recording for the current channel Enable Audio Enable audio for the current channel Full screen This displays the image in full screen mode When in the full screen mode double click or right click to exit full screen mode User can choose to output the signal on a secondary monitor by selecting DISPLAY2 When output is displayed on the secondary monitor the user can continue with other activities on primary monitor 2012 03 07 10 06 36 Fig 4 4 Camera Preview 10 Digital Video Recorder CMS User Manual Save To LE Documents and Settings blu Documents My Pictures 2 One Picture per Page Mult Picture per Page Printer Setup A i Fig 4 5 Snap Dialog Box 4 2 1 PTZ Configuration PTZ camera can be controlled
17. displayed in Device List 4 3 1 3 Dwell Setup Dwell Setup allows setting dwell function for channel groups Configuration Steps Y i Inthe Device Manager interface click 7 button It will pop up Dwell setup dialog box Refer to the picture below 30 Seconds a 2 Minutes Fig 4 8 Dwell Setup ii After selecting groups user can set the dwell time for each group options 5 10 20 30 60 seconds or 2 minutes Su A lll In the Live interface click Dwell icon to dwell Refer to the picture below SEC AMOS DO tamg 01 03 2004 17 01 26 Seraor16 Alsen 245 2009 11 23 17432 Serace S Alsea 26 2009 11 23 174326 Serao 3 Alum 246 2009 1123 17 43 26 Seraor12 Alsen 245 2009 11 23 17 43 26 Sernor1 Alum 246 2009 11 23 17 43 26 Sermor10 Alx 245 2009 11 23 17 43 26 w gt Fig 4 9 Live Dwell 13 Digital Video Recorder CMS User Manual 4 3 1 4 Add Device A region or a group should be created before adding a device DVR User should select a region or group to add the DVR Below is an example of adding a DVR to a region i In Device Manager interface select the region in Device List and click lt gt button It will pop up Add Device dialog box li Click Search Device button and it will pop up Device Search dialog box The search tool would search and display the DVRs available on the network iii Double click the DVR in device list box to select the DVR and to go back to Add De
18. e for a 1 minute precision The scale range 0 60 denotes minutes of an hour 4 5 2 Video Backup Backup Ma Remote backup Select Time Record Type ee O By Time StartTime 2008 7 15 15 55 22 A PU S NS Es 2 By Event End Time 2008 8 144 15 55 22 Motion Sensor Select Ch Search Backup Backup Path CA Program Files ControlCenterBackupDiata Ey kia 4 Event Type Device Name Channel Name Start Time End Time Fig 4 15 Remote Backup User can backup files for a date range based on time or events There are two types of backups local and remote backup The former is to take the backup of local recordings files residing on the computer and the latter Remote Backup is to take backup from the remote DVR Backup by Time To backup record files by time user needs to set the Start time End Time and select Channels i On Video Search toolbar click Backup li Select By Time option to backup the recorded files based on date and time iii Select the required date and time for the record period ro aS iv Click button to select the channels v Click OK button to go back to Backup Interface Es Backup vi Click button to begin searching and backing up the recorded files Ne Notice The user can define the backup path as required Backup by Event For taking backups based on events user needs to set Start Time End Time and Record Type and th
19. earch are video Playback and Backup 4 5 1 Video Playback Supports Local Playback and Remote Playback Playback Remote Playback AA Select device Record Type Select Date Select Ch Search A SSS e Fig 4 14 Remote Playback User can search and playback video files of different channels for different dates User can select a maximum of 16 channels for simultaneous playback This system supports local playback and remote playback The local playback refers to playing 21 Digital Video Recorder CMS User Manual recorded files which have been saved locally i e the computer The remote playback refers to playing the recorded files from the DVR Although these two types play recorded files from different paths they have the same settings and control operations Here we take remote playback for example Please refer GUI objects for the playbacks 4 Meanings Play button Once searched select the recorded file and click this button to play record files Pause button While playing click this button to stop playing To continue playing use the Play button Stop button When in play or pause mode click this button to stop playing Playing Speed button When playing click this button and select playing speed with the drop down menu Available options 1 4X 1 2X 1X 2X and 4X S F Next Frame button When in pause mode adjust the required cha
20. en select Channels i On Video Search toolbar click Backup li Select By Event to backup the recorded files based on events iii Select Date and Time iv Select the required events in Record Type box Schedule Manual Motion Sensor 23 Vi Vil viii IX Digital Video Recorder CMS User Manual g Lee Click Click OK button to go back to Backup Interface button to select the channels Click we button to search the recorded files Select the files required to be backed up from the listed files Es Backup Click button to backup the files NW Notice The user can define the backup path as required 5 Use Method for IP Tool NY Notice Do not power off when updating First install the CMS software and the IP Tool icon IF Tool information dialog box will pop up as below Deme Ferre IP Address Subral Mark Tener Dista Pot MAL Hirisa 11641123 Stas 0000 008 OAAE WO IF Carma 11 2 hae 132 1631145 SO 182168111 3008 OA DEE DA IF Carma 11 2 DA 132 The 3 SF Pa 2S 2 0 132 1565231 200 125155 7855 re DA T p Eal ATRIO 12 1611173 AO Wee 27 ORAE HA DWA 64 DW FM 11643 108 AO 1216031 2000 OBESA CVA pR 121663134 HABRA 1216831 2000 Ses Tesi DA 2 Obata nae 132 TE Ss n rE 5 1216531 3008 OP TASS 50 01 85 IF Craii 11 2 tithe 1215312509 AO 1821 1160 MESS SSA jap SVR CTA A AA A AA Caren 11 2 ASEO AS PES 11 48 nine 121651153 DA FLA 12161154 DA 12
21. ent channels and controlling PTZ cameras Local View In the operation area user can view live images select automatic dwell take snapshots close all previews etc The toolbar buttons are described in the following table Digital Video Recorder CMS User Manual Single Picture Preview button Click this button to watch camera in single picture preview mode 4 Picture Preview button Click this button to display in 4 picture preview mode 9 Picture Preview button Click this button to display in 9 picture preview mode 36 Picture Preview button Click this button to display in 36 picture preview mode 6 picture Click this button to display in 6 picture mode 8 picture Click this button to display in 8 picture mode 13 picture Click this button to display in 13 picture mode 49 picture Click this button to display in 49 picture mode 64 picture Click this button to display in 64 picture mode 100 picture Click this button to display in 100 picture mode 256 picture Click this button to display in 256 picture mode Audio button Click this button to turn on the audio signal Snapshot button Click this button to take snapshot of the selected camera A maximum of 10 pictures can be taken in one go Click Snap button to pop up a dialog Close All Preview button Click this button to turn off the live video Before switching display modes user must turn off the live images Dwell button This can be set from a single channel mode
22. et camera Users can set a camera in the E Map as per the actual map of the area Configuration Steps i Inthe Map Config interface select the map to add camera li Select a camera from the device list and drag it to the E Map on a suitable location Notice Once the setup is complete the user can enter into the E Map interface to watch live pictures and map alarm Please refer to Chapter 4 4 E Map for more details 18 Digital Video Recorder CMS User Manual 4 3 5 User Manager An administrator can add several users and set the access rights for each user To add users to operate the CMS please enter Into System Configuration gt User Manager interface Function List Add user Modify passwords Delete Users 4 3 5 1 Add User Configuration Steps i In System Config men click User Manager button li Click Add User es button and the dialogue of Add User will pop up iii Input user name and password in the text boxes iv Click Confirm button to add user successfully v Set authorization for the added user such as PTZ local playback and backup local record E map and so on 4 3 5 2 Modify Password An administrator can reset the password of a user to the default password However in order to change the password a user would need to login from his her account and then modify the password from User Manager The following will introduce the steps to modify the password f
23. from the Control Center User can move the dome up down right and left stop rotating adjust rotation speed iris Zoom focus the dome set the presets and cruise lines etc 4 2 2 1 Dome Control From the PTZ Configuration toolbar the user can control rotation and speed of the dome Function buttons of the Dome Control are described in the table below wi rotate up w rotate down d rotate left P rotate right E stop 11 4 3 The System Config tab provides an interface for system configuration This includes Device Manager Local Configuration Server Digital Video Recorder CMS User Manual In the device list box right click a certain channel a shortcut menu will be shown as follows Stream Enable the master stream This machine supports master stream and second stream Master stream has higher frame rate max 25FPS for every channel but it needs higher network bandwidth Second stream has EI lower frame rate max 6FPS for every channel and it requires lower network bandwidth Therefore Second siream user can select the stream according to their bandwidth Turn off the live To turn off live picture display from current channel Start Manual Record Select a channel and click Start Manual Record This will start recording the 3 gt auci ANNL channel Click Stop Manual Record to stop recording Enable audio Click this to activate the audio for the channel Fig 4 6 Right Key Sub Menu
24. hannel for the query vi Select the required channels and Control Center Log as per the requirement vii Once selected click y button and the interface will search the information as per the set parameters and display the same on the screen 4 3 7 Export amp Import Local Config User can export or import local configuration The following steps are an example Configuration Steps al i Inthe System Config menu click Export amp Import Local Config El icon to access the Export 4 Import Local Config interface li Click icon to choose the path to save the export file or to import the configuration file lil Click Export or Import button to export or import the configuration file iv After finishing the above operation click Exit button 44 E Map E Map is used to stimulate an area under surveillance using pictures and maps 4 4 1 Change Icon Configuration Steps ay E t i Click di button to enter into E Map interface li Select a camera on the map right click and choose Change Icon iii Change Icon dialogue box will popup Select an icon and click OK to change the icon of the camera 20 Digital Video Recorder CMS User Manual 4 4 2 Delete Camera Configuration Steps i Click sli button to enter into E Map interface li Select a camera on the map right click and choose Delete iii Click Yes on the confirmation box to delete the camera
25. nlock button Indicates that the Operation Interface is in Unlock state Indicates that the Operation Interface is in Lock state When current operation interface is in Lock state the user would need to enter the password to unlock in order to use the Control Center The user can lock the interface by clicking the lock icon 4 1 2 Minimize amp Maximize Click to maximize Control Center window Click to minimize Control Center window or re size the Control Center to original size 4 1 3 Alarm Display In the alarm display interface user can view information pertaining to the alarms It includes Alarm Type Device Name Camera Number and Alarm Time Alarm Display List is shown in Fig 4 1 below Digital Video Recorder CMS User Manual x Alarm type Device name Channel NO Time A Stop Motion Alarm DRA LAME 2011 11 04 10 31 39 Stop Motion Alarm DR LAM 2011 11 04 10 31 39 Stop Motion Alarm OWA LAME 2011 11 04 10 31 38 Stop Motion Alarm DR LAM 5 2011 11 04 10 31 38 Stop Motion Alarm DF CLAMS 2011 11 04 10 31 38 Fig 4 1 Alarm Display List When sensor alarm is triggered a blue square will pop up and twinkle am The digital number in this square means the amount of alarm event Double click this icon to pop up the detail information of these alarm events as shown below Alarm event Device name Alarm type Time name Senzor Alarm 2011 11 03 16 50 24 Select one alarm event and click
26. nnel to single 1p ae s channel display mode and click this button to play frame by frame Playing Scale Marker 4 Once a recorded file has been searched a user can use this scale on the timeline for a precise time to playback Right click on the marker pointer to amplify or contract the time scale Ag Start of backup stamp button Select it to start stamping the record of a channel TART for backup End of backup stamp button Select it to end the backup stamp Erase backup stamp button Select it to clear up its backup stamp Backup button Select it to backup the record during the period of start to end O of backup stamp Configuration Steps Vi Vil In the System Config menu click Record Playback icon Select the Record Type from available options Schedule Manual Motion Sensor carte button select the date for the required record Click YN Click Ao button to select the channels Click y button to search Once searched the record file will be displayed on the right hand side Drag playing scale marker for the required timeline and click 4 pointer to amplify the time scale e Click P button or drag marker to play the recorded file 22 Digital Video Recorder CMS User Manual Y Notice The default precision of time scale is 15 minutes and the range of scale is 0 24 which denotes 24 hours of a day Click 4 to amplify scal
27. nnels using alarm inputs From the device list select the device and configure the Alarm Input Sensor and the trigger mode This can be set to raise a PC Audio Alarm or and record channels 4 3 3 Server Configuration The customer can configure a DVR using the Server Configuration interface Please refer to DVR s manual as configuring the DVR through CMS is similar to the manual configuration 4 3 4 Map Configuration A user can upload maps of the area associate different cameras with different regions of the map area and set alarms This provides a GUI which helps the user to relate it to the actual site locations In the System Configuration click Map Config to access the interface In Map Configuration users can add or delete e maps modify map names Function List Add Maps Add Sibling Nodes Add Sub Nodes Modify Map Names Delete Sub Nodes Set Camera Add Maps User can add several E Maps Configuration Steps i In the System Config menu click Map Config button and then right click on the Map tree to access the sub menu li From the sub menu select Add Map and enter the name of the map in the textbox iii Inthe Path box click a button and the Open dialogue box will pop up iv Select the path of E Map and click Open button to confirm path 17 Digital Video Recorder CMS User Manual v Click Confirm button to add E Map in Control Center
28. nt Display Mode 1024 x 768 32 bit 75H2 VDO nja Monitor Plug and Play Monitor DDI Version 9 or higher DirectX Features DirectDraw Acceleration Enabled Drect3D Acceleration Enabled Test Direct3D AGP Texture Acceleration Enabled Notes No problems found Totest DirectDraw functionality dick the Test DirectDraw button above Totest Direct3D Functionalty click the Test Direct3D button above Help Next Page Save All Information Fig 6 1 DirectX Diagnostic Tool under Windows XP Click Display tab to check the VGA driver information If the Device Information and the Driver Information is correct make sure that the DirectDraw Acceleration and Direct3D Acceleration is Enabled 2 Install the VGA driver in case it is not installed T Notice The default state of DirectX acceleration of Windows2003 Server and Vista system is disabled Thus the user would need to enable this function A Hardware Acceleration Right click on the Desktop gt Properties gt Settings gt Advanced gt Troubleshoot Drag the scroll bar of the hardware to the Troubleshoot interface and press OK The screen may go blank for minute B DirectX Acceleration Click Start and input dxdiag command into the Run column and press enter The DirectX Diagnostic Tool interface will pop up Refer to Fig 6 2 Enable DirectDraw Direct3D and AGP Texture on the Display interface hj jS at EC System Dis
29. pdate File Enter into Update Kernel interface dialog box input admin in the User Name text box and input 123456 in the Password text box Click Brower to select the Update file mboot8180 8180 Click Update button to start updating When upgrading doesn t disconnect PC to device make sure power is on The update progress bar will display like below Update Kernel IP Port User Mame Password Update File When update is finished a message box will pop up After a while the device will restart automatically 26 Digital Video Recorder CMS User Manual 6 Troubleshooting Solutions for installing CMS system in Windows Server 2003 Windows 2007 Window XP and Vista In case the VGA driver is not installed correctly the CMS software screen will appear to be incomplete The screen may also flash Below are the steps 1 Click Start button enter the dxdiag command into the Run column and press Enter button The DirectX Diagnostic Tool interface will pop up Refer to Fig 6 1 DirectX Diagnostic Tool ed System Direct lt Fies Display Sound Music Input Network More Help Device Drivers Name ATI Radeon X1200 Series Main Driver ati2dveg dl Manufacturer ATI Technologies Inc version 6 14 0010 6925 English Chip Type ATI Radeon X1200 Series 0x791E Date 4 27 2009 20 41 00 DAC Type Internal DAC 400MHz WHOL Logo d nfa Approx Total Memory 320 0 MB Miri VDD ati2mtag sys Curre
30. play Scund Scund2 Sound 3 Input Device Drivers Nam ATI Padecr HD 3600 Seres Nzin Diver adumd64 cl atcxo64 dil atundag a Manufacturer ATI Tedmooges Inc Version 3 24 3010 0635 Zxgheh Chip Typa ATI display adapzer 9 9598 Dave 2009 7 15 9 49 25 DAC Typa Intema DAC 400MH2 WHOL Leco d 1 a Approx Tozal Memory SCE M3 DDI Version 3Ex Current Cieplay Mode 1280 x 1924 32 bt 60Hz Monizcr Gener c Non gt P Moritor DirectX Features DiectD aw Accelerator Enabled DirectdD Accel aticr Enebled AGP Texture Accelerator Enabled Notes Hoproblems found sb TNT A Fig 6 2 DirectX Diagnostic Tool in Windows Vista OS 27
31. r the Control Center The Control Center Interface is shown below in Fig 3 3 q EDVR_5_217 Es O a i Mill did F Lt 1 led 2012 03 07 O 10 30 31 MU 3 YGA 25tps II 4 OVGA dips m i E aca H miei Pe Selec Prese v Select Cuise v Alarm type Device name Channel MO Video Loss EDYA_B 217 CAM 4 2012 03 07 10 01 41 Video Loss EDVA_6 217 CAMS 201 2 03 07 10 01 41 Video Loss EDVA_6 217 CAM 201 2 03 07 10 01 41 Video Loss EDVA_6 217 CAM 201 2 03 07 10 01 41 b Device List Ig ii REIT ae Fig 3 3 Control Center Interface Digital Video Recorder CMS User Manual 3 2 Exit There are two ways to exit control center normally Exit 1 Click button and then a confirm dialogue will pop up If confirmed the application would be exited 2 The user can click ma button to exit 4 Functions amp Operations This chapter is divided into 5 parts for the ease of understanding the following features 1 Basic Functions Preview System Configuration E Map Video Search Backup a a w N In this chapter we will divide five parts to instruct the functions and specific operations of this software User can enter the control center to monitor through the Internet to set parameters to enable the record to playback the recorded files to backup and so on 4 1 Basic Functions After entering the Control Center user can operate the following functions 4 1 1 Lock amp Unlock EY Lock amp U
32. rom user login Configuration Steps for modifying a user password from the user login i Login from the user s account PA li Inthe User Manager interface click modify _ button and the dialogue box of modify password will pop up Mew Password Confirm User Name Password Fig 4 11 Local Basic Config iii Input current password new password and confirm the same in the respective fields iv Click OK to change the password To reset a password of a user from an administrator account select the user from the user list click Change Password E7 button and confirm to reset the password to default value 19 Digital Video Recorder CMS User Manual 4 3 5 3 Delete Users The administrator can delete the users Configuration Steps i Inthe User Manager interface select the user to be deleted ii Click Delete G3 button and confirm to delete the user 4 3 6 Log Query A user can check logs pertaining to alarms and CMS operation Th following steps are an example of log query Configuration Steps G i Inthe System Config menu click Log Query LA icon to access the Log Query interface li Select Log Type as Alarm iii Select an alarm type from the alarm dropdown box iv Select the date and time for the records to be checked Notice User can query the data for one date at a time v Click NE icon to select a particular c
33. s Holiday Schedule Configuration User can also set certain dates as holidays and configure the time zone for the same i Select the camera from the device list ii Add a date in Holiday iii Click 4 button and use the mouse to set the schedule for the holiday Local Alarm Configuration A user can configure the CMS for recording based on a motion detection sensor alarm or video loss alarm i Inthe Local Configuration interface select Local Alarm Config tab li Select a channel from the device list 16 Digital Video Recorder CMS User Manual iii Select the Alarm Type t Notice In order to select sensor based recording alarm select the device from the device list and the sensors would be displayed in the Alarm type box iv Once an alarm type has been selected the user can trigger PC Audio Alarm Channel Recording or link it to E Map applicable to motion and video loss alarm only t Notice Alarm Trigger Local Sound Alarm E Map Alarm and Trigger Channel Alarm gt A particular alarm can be set to trigger a local sound alarm on the CMS Sound alarm can be triggered by sensor alarm motion detection or video loss E Map Alarm refers to triggering an alarm on the E Map Once an alarm has been linked to an E Map the selected channel camera would appear in alarm state in the E Map For further details please refer to section 4 3 4 Set Camera The user can also trigger recording of cha
34. s installed by the previous setup C Remove A Remove all installed components Hest Cancel 3 Login amp Exit 3 1 Login After setting up the Network Video Surveillance System and installing the Control Center program user needs to login to the Control Center for configuring devices Steps for logging in are described below Double click icon on the desktop it will pop up Create SYSTEM password dialog box Refer to Fig 3 1 Create SYSTEM password Mew Password Po Confirm please input email address password would be sent to this account in case password forgotten To Email Po test pour account settings Figure 3 1 Create SYSTEM password The default username is SYSTEM User can create an alohanumeric password max password length is 32 characters Click on the options button to expand the window An administrator can register an email for receiving an auto generated email with the password in case the password is lost In order to retrieve the password a PC would have to be connected to internet Digital Video Recorder CMS User Manual Click OK button to enter the Login interface Refer to Fig 3 2 and input the password in the password text box If the user doesn t remember the password he she can press Get System Password button to have the password mailed to the preconfigured email address UserName SYSTEM Password Fig 3 2 Login Interface Click OK button to ente
35. vice dialog box to add the device iv Select IP of the DVR in IP Address dropdown list v Input username and password of the DVR in User Name and Password fields vi Input the data port of the DVR vii Click OK button and the added DVR will now be listed in the Device List NY Notice If the DVR is in LAN user may use the default port 9008 If the DVR is in WAN then the user would need to mention the port number for every DVR If the DVR is in WAN user would need to modify port number in Server Configuration gt Net Configuration Refer to Network Setup of the DVR manual Please refer to the following instructions for adding device I D This icon denotes region or group a This icon denotes a device Y This icon denotes channel li Once a device has been added users can add the channels of the device to the relative channel group by selecting the channel group in Channel Group box and clicking button User will have to turn off the live view first and then add the channel to the group iii Channels of every added device would be listed below the device name 4 3 1 5 Modify User can modify region group device and channel names Steps i Modify Region In device list select the region and click H button It will pop up Modify Region Info dialog box Input new region name in Region textbox Click OK button to modify the region name ii Modify Group Pd In camer

CMS User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents