Home

ID CARD READER

image

Contents

1. B Now punch the card which need to be removed Everytime when the card is removed successfully there will be 2 short indicating sound of D IDI and unlock red indicator Ld3 will flash one time which means the confirmation of removing this card Now red indicator will go on flashing which means next card can be removed now When all cards are removed punch the management removing card to go back to normal working status And the card reader will recollate sequence of cards after that there will be 3 long indicating sound of DI DI DI which means the cards are removed successfully and indicator green light will turn off then the system will come back to normal working status Notice If the wrong user s card is punched to be removed the system will be with 3 short indicating sound of DI DI DI now next card can be going on removed The interval time of punching card should be not more than 30 seconds otherwise it will go back to normal working status 2 ID CARD READER 3 USER S MANUAL READER INSTRUCTION MUNUAL BUILT IN DOOR STATION OF 2003 SYSTEM Note Connect to NO and G for electric lock unlock when powered and connect to NC and G unlock when no powered LD1 ID COIL IC COIL FETI u i e EE EHEHE E Lock 3 i d J12 J6 Eesui3 EN pac vy Ee 123 EEEE EN
2. NEN E EEE n m igi m 1 G D UL VCC 12VG KNO C NC LALB Door Station _ Power Exit Button es THE SETTING OF UNLOCK TYPE 1 This system can set unlock type by operating J6 pin A Short connect 2 and 3 of J6 if electric lock connected unlock when powered B No connection among 1 2 3 of J6 if electromagnetic lock or mechanical lock connected unlock when no power but the lock has to get power from external power supply THE SETTING OF UNLOCK TIME This system can set unlock time by operating J2 and J3 and there are 4 kinds of unlock time available for choice as following J2 J3 UNLOCK TIME 2 3 Short Connected 2 3 Short Connected 500mS 1 2 Short Connected 2 3 Short Connected 3S 2 3 Short Connected 1 2 Short Connected 7S 1 2 Short Connected 1 2 Short Connected 10S ID CARD READER 4 USER S MANUAL
3. SUMMARY OF ID CARD READER With big cards capacity up to 1000 pieces and stable card unlock function this ID card reader can release the lock as an intelligent and qualified card access BRIEF INTRODUCTION OF ID CARD READER 1 Front Part Picture ID CARD READER LD1 fb con IC COIL LD2 T T a on ue i Gesui3 3 Gea ue pac v Gah 123 HEHEHE HBHHEHHEHEHESE EEE T TL ipi Ti I G D UL VCC 12V G KNO C NC LALB Qu co 7 OQ mM UF OO ae 20 OZXPSESQ0 e368 TEF FPE m mowaCPC zo gt z On A z Ce 2c Br Fr s A 18 O J 22 2 ipa oy os8s Connect to LSAS 2003 Door Bus line connector Station of alone card reader LD1 Red Power Indicator LD2 Green Status Indicator LD3 Red Unlock Indicator it will flash when card punched by user 2 Pins Introduction Pin Function Operation Setting Short connect 1 2 to set the management card J1 management card and short connect 2 3 to standard working status 12 13 Setting unlocking time Check 7th part J6 Setting unlock type Check 6th part ID CARD READER 1 USER S MANUAL MUNUAL OPERATION OF ID CARD READER Everytime when card was added or removed the card reader will collate sequence of cards again and the time of collating sequence will depend on quantity of cards and every 5 seconds there will be a sound of DI 1 Set up Management Card Add or Remove Manag
4. ement Card The detailed procedure is as following A Power off the card reader and short connect pins 1 and 2 of J1 by socket cap B Power on the card reader then it will send out indicating sound of DI DI then red LD1 indicator flashing now it enters into setting of management card C Punch the first card and the correct indicating sound is a long sound of DI meanwhile unlock red indicator of LD3 will flash one time which means the success of setting first management of adding card Now this card is management card Punch the second card and the correct indicating sound is a long sound of DI meanwhile unlock red indicator of LD3 will flash one time which means the success of setting first management of removing card If second card is wrong or with same number of first card there will be with wrong indicating sound of three short DI DI DI and now the second management card can be set again E After two card are successfully set and now if the third card is punched there will be 3 short indicating sound of DI DI DI anyway it will not affect the cards which were set already F After management cards are set remove socket cap 1 and 2 of J1 and put them to 2 and 3 pins Now the system will be with indicating sound of DI DI and red indicator of LD3 will become on all the way which means the system has come back to normal work status and setting of management cards is finished 5 2 Adding U
5. sers Cards A When card reader is at normal working status punch the management adding card and now there will be 3 long indicating sound of DI DI DI and green indicator LD2 will turn on which means the system enters into status of adding users card B Now punch the cards required and everytime when each user s card is added successfully there will be with a long sound of DI and unlock indicator LD3 will flash one time which means next user s card can be added ID CARD READER 2 USER S MANUAL C After all users cards are added successfully punch the management adding card to exit the status of adding users cards Now the card reader will collate sequence After it there will be 3 long indicating sound of DI DI DI which means success of adding cards and green indicator LD2 turn off to go back normal working status Notice Each card can be only punched for one time otherwise there will be with 3 short wrong indicating sound of DI DI DI and now user s card can be added again Every interval time of adding user s card can t be more than 30 seconds otherwise the system will go back to normal working status 3 Removing Users s Cards A When the system is at normal working status punch the management removing card Now there will be 3 long indicating sound of DI DI DI and indicator green light of Ld2 will flash all the time which means it can remove the users cards now

Download Pdf Manuals

image

Related Search

Related Contents

USER MANUAL TREF GB  Versão para impressão - Xerox Support and Drivers    M420X/M420XV - NEC Corporation (Thailand)    販売終了のお知らせ WRX7000/700シリーズ  

Copyright © All rights reserved.
Failed to retrieve file