CM4400/CM4450, EM4400/EM4450 Ceiling/Wall
Contents
1. Method of return shipment shall be the same or equal to the method by which the item was received by Pelco RETURNS In order to expedite parts returned to the factory for repair or credit please call the factory at 800 289 9100 or 559 292 1981 to obtain an authorization number CA number if returned for credit and RA number if returned for repair All merchandise returned for credit may be subject to a 2096 restocking and refurbishing charge Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid Ship to the appropriate address below If you are located within the continental U S Alaska Hawaii or Puerto Rico send goods to Service Department Pelco 3500 Pelco Way Clovis CA 93612 5699 If you are located outside the continental U S Alaska Hawaii or Puerto Rico and are instructed to return goods to the USA you may do one of the following If the goods are to be sent by a COURIER SERVICE send the goods to Pelco 3500 Pelco Way Clovis CA 93612 5699 USA If the goods are to be sent by a FREIGHT FORWARDER send the goods to Pelco c o Expeditors 473 Eccles Avenue South San Francisco CA 94080 USA Phone 650 737 1700 Fax 650 737 0933 Removed agency logos from cover and updated specifications updated Warranty and Return information Copyright 2004 Pelco All rights reserved PELLO Worldwide Headquarters 3500 Pelco Way Cl2. surface The product and or manual may bear the following marks A This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit Please thoroughly familiarize yourself with the information in this manual prior to installation and operation C244M C 8 04 Description The 4400 wall mount and the CM4400 ceiling mount feature an adjustable tilt table and are designed for use with small camera enclosures These mounts are designed to hold loads of up to 15 pounds 6 75 kg The EM4450 wall mount and the CM4450 ceiling mount are designed with an adjustable swivel head to handle camera loads up to 7 pounds 3 15 kg 4 C244M C 8 04 Installation To install the EM CM 4400 4450 light duty mounts perform the following steps dl Drill holes in the mounting surface using the mount as a template or refer to Figure 1 for mounting dimensions Where required drill a 1 2 inch minimum diameter hole for cable feedthrough When applicable feed the camera power supply cable and coax through the mount arm and out the 1 2 inch diameter hole in the arm Extra access may be gained by removing the black plastic cap from the end of the arm Be sure to feed an adequate quantity of cable through for camera hook up Attach the mount securely using appropriate fasteners If you install the mount outdoors on a wall rain water could leak through the holes for the mounting bolts a
3. INSTALLATION OPERATION CM4400 CM4450 27 EM4400 EM4450 Ceiling Wall Mounts 1A C244M C 8 04 Contents UC PME 3 Description NORTE TECHN 4 pats le ees enacts cease ae mabe 5 Camera Enclosuire AttachMents aee etur tle EDDA ERE RR CM 5 EMA400 CM4AG Ors TTM 5 Bn HH 5 6 List of Illustrations 1 Mounting Dimensions 2 enne enm Ree ber du ie de aus cob 5 2 CM4400 CM4450 Dimension IR 3 e e e e e e e e 6 3 EM4400 EM4450 Dimension Ihe REI IMPER DUET Id RE RERUM Dd pb Shi 6 2 C244M C 8 04 Warnings Prior to installation and use of this product the following WARNINGS should be observed 2 Installation and servicing should only be done by qualified service personnel and conform to all local codes Only use replacement parts recommended by Pelco Installation shall be done in accordance with all local and national electrical and mechanical codes utilizing only approved materials Use only installation methods and materials capable of supporting four times the maximum specified load Use stainless steel hardware to fasten the mount to outdoor surfaces To prevent damage from water leakage when installing a mount outdoors on a roof or wall apply sealant around the bolt holes between the mount and mounting
4. UNTING PLATE DIMENSIONS Figure 1 Mounting Dimensions Specifications Pan Adjustment 25 x 44 SLOT Unlimited 360 0 50 1 27 Tilt Adjustment 90 uae 112 Locking Method o NG w Ed t CM EM4400 1 4 20 hex head bolts 3X Y Y CM EM4450 Set screw secures swivel assembly os ito al 200 M 19 22 2 54 5 08 Enclosure Camera 5 13 13 03 Mounting CM EM4400 Two 1 4 20 hex head screws provided CM EM4450 1 4 20 threaded stud and nut Maximum Load CM EM4400 15 Ib 6 75 kg CM EM4450 7 10 3 15 kg 25 40 Construction Steel Finish Gray polyester powder coat cu Dimensions See Figures 2 and 3 2 68 ME 6 81 Unit Weight E CM4400 3 62 Ib 1 64 kg CM4450 1 35 Ib 0 61 kg t a 1 EM4400 2 7016 1 22 kg 15 24 med EM4450 2 34 Ib 1 06 kg CM4450 Design and product specifications subject to change without notice NOTE VALUES IN PARENTHESES ARE CENTIMETERS ALL OTHERS ARE INCHES Figure 2 CM4400 CM4450 Dimension Drawing B 50 1 27 A FN E SOL rl 2 00 E cH m QM 508 gt 252 ES 2 68 A bi 50 a p 829 1 00 4400 2 54 10 00 25 40 EM4450 NOTE VALUES IN PARENTHESES ARE CENTIMETERS ALL OTHERS ARE INCHES Figure 3 EM4400 EM4450 Dimension Drawing C244M C 8 04 PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace without charge any merchandis
5. e proved defective in material or workmanship for a period of one year after the date of shipment Exceptions to this warranty are as noted below Five years on the following fixed camera models CC3701H 2 CC3701H 2X CC3751H 2 CC3651H 2X MC3651H 2 and CC3651H 2X hree years on all other fixed camera models including Camclosure Integrated Camera Systems and Genex Series multiplexers server and keyboard Two years on all standard motorized or fixed focal length lenses Two years on Legacy CM6700 CM6800 CM8500 CM9500 CM9740 CM9760 Matrix DF5 and DF8 Series Fixed Dome products Two years on Spectra Esprit and PS20 Scanners including when used in continuous motion applications Two years on Esprit and WW5700 series window wiper excluding wiper blades Eighteen months on DX Series digital video recorders and NVR300 series network video recorder One year except video heads on video cassette recorders VCRs Video heads will be covered for a period of six months Six months on all pan and tilts scanners or preset lenses used in continuous motion applications that is preset scan tour and auto scan modes Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment All goods requiring warranty repair shall be sent freight prepaid to Pelco Clovis California Repairs made necessary by reason of misuse alteration normal wear or accident are not covered under this warra
6. nd damage the wall This could be a problem only if the mounting bolts go completely through the wall To prevent water damage seal the bolt holes with an appropriate sealant Apply the sealant around the bolt holes between the mount and the mounting surface o NOTE The two fasteners that secure the mount to the mounting surface are not supplied CAUTION Make certain that the mounting surface is able to support the full load of the mount enclosure and camera CAMERA ENCLOSURE ATTACHMENT EM4400 CM4400 Attach the camera or enclosure camera assembly using one or both of the 1 4 20 x 500 hex head screws provided 2 Loosen the hex head bolts securing the tilt table assembly and adjust for the proper pan and tilt angles Tighten all hardware access to the pan adjustment screw is gained by removing the black plastic end cap 3 Connect camera power and coax cable Reference the appropriate enclosure manual as required for further installation EM4450 CM4450 1 Attach the camera or enclosure camera assembly to the 1 4 3 00 ij 20 threaded stud on the swivel head and tighten the nut nsi against the camera 2 Loosen the set screw on the swivel assembly if necessary with the Allen wrench that is provided Position the camera enclosure in the desired position and tighten the set screw 3 Connect camera power and coax cable C244M C 8 04 FEED THRU 281 71 DIA 2X MOUNTING TEMPLATE MO
7. nty Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products Pelco s liability for any claim whether based on breach of contract negligence infringement of any rights of any party or product liability relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products In no event will Pelco be liable for any special incidental or consequential damages including loss of use loss of profit and claims of third parties however caused whether by the negligence of Pelco or otherwise The above warranty provides the Dealer with specific legal rights The Dealer may also have additional rights which are subject to variation from state to state REVISION HISTORY Manual Date Comments C244M C 8 04 Pelco the Pelco logo Spectra Genex Esprit Camclosure and Legacy are registered trademarks of Pelco If a warranty repair is required the Dealer must contact Pelco at 800 289 9100 or 559 292 1981 to obtain a Repair Authorization number RA and provide the following information 1 Model and serial number 2 Date of shipment number Sales Order number or Pelco invoice number 3 Details of the defect or problem If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above please include a written explanation with the product when returned
8. ovis California 93612 USA USA amp Canada Tel 800 289 9100 Fax 800 289 9150 International Tel 1 559 292 1981 Fax 1 559 348 1120 www pelco com 1509001 United States Canada United Kingdom The Netherlands Singapore Spain Scandinavia France Middle East
Download Pdf Manuals
Related Search