User`s Manual - Northern Tool + Equipment
Contents
1. peewee frown 2 homem ee jx o efa fue pa o raa 1 ee ee pe 1 he fofa falam fa hmmm o fufas a oa mpe ai fopamom o hme fa peoe fam fs for a2. prication ltem 109089 24 Gallon Air Operated Oil Drainer User s Manual Assembly and Operation Instructions MADE IN CHINA For technical questions and replacement parts please call 1 800 556 7885 Thank you very much for choosing a NORTHERN TOOL amp EQUIPMENT CO Product For future reference please complete the owner s record below Model Purchase Date Save the receipt warranty and these instructions It is important that you read the entire instruction sheet to become familiar with this product before you begin using it This machine is designed for certain applications only Northern Tool amp Equipment strongly recommends that this machine is not modified and or used for any application other than that for which it was designed If you have any questions relative to a particular application DO NOT use the machine until you have first contacted Northern Tool amp Equipment to determine if it can or should be performed on the product Before using this product please read the following instructions carefully WARNING Do not extract caustic or flammable products Do not expose the reservoir to any source of heat While extracting high temperature oils keep hands and face protected Only use the device for the purpose for which it has been designed Do not modify any component of the equipment Only use original spare parts Our technical office is at your full disposal for any information you may need AS
3. SEMBLY Fig 1 Insert the handle B into its seat and secure it with the screws provided position the tool tray A Fig 2 Attach ball valve C to the drain basin and tighten it with a suitable wrench Fig 3 Connect the assembled group the reservoir tank by tightening ring nut D using a suitable wrench and screw with handwheel E Fig 4 Attach the hose with the ball valve and adapter F on the base of the units tank OPERATION Fig 5 To raise and lower the catch basin loosen handwheel E by turning it counter clockwise tighten with handwheel E by turning it clockwise after reaching desired height CAUTION Never fill the reservoir over the maximum level indicated by the gauge that is located on the side of the reservoir EMPTYING IMPPORTAN Fig 6 Make sure that valve C is closed Make sure that screw E is tightened Attach the end of the drain hose to a suitable waste oil container Open ball valve G Connect compressed air 7PSI to quick couple M and open the ball valve H After the fluids have been transferred from the unit s reservoir tank close ball valve G The unit is equipped with a safety valve that has been factory calibrated at 14PSI lt gt H M D hss RA ie es a Parts List re ener on ne encom owe oon Jo msm she ahem ohms peewee fs a fweasas Deea i ee rbmasmo 1 Pe faces
Download Pdf Manuals
Related Search