Home

User`s Manual - Get Dash Cam

image

Contents

1. EEA This video will not be overwritten until the memory card is formatted Note A quick press less than one second of the power button I while recording changes the Dash Cam from day mode to night mode the following icon will display on the top of the display screen when in night mode Note Pressing the up button B while recording will zoom the camera in up to 4x digital zoom Press the down button M to zoom out Note The menu button oO has no function while the camera is recording B Still Photo mode A still photo camera icon will appear in the top left of the screen Memory card must be inserted After the device is powered on press the OK button to stop recording Once recording has been stopped press the mode button once to enter still photo mode the Dash Cam cannot change modes while the camera is recording Note To capture a photo in still photo mode press the OK button a Note A quick press less than one second of the power button MJ while in still photo mode changes the Dash Cam from day mode to night mode the following icon will display on the top of the display screen when in night mode Note Pressing the up button B while in still photo mode will zoom the camera in up to 4x digital zoom Press the down button M to zoom out C Preview mode A film negative icon will display in the top left of the screen To view video memory card must be inserted After the device is powered on press
2. DASH CAM User s Manual Model 4SK106 Thank you for choosing The Original Dash Cam This manual offers detailed information on how to operate the dash cam including how to operate the device matters that need your attention and technical specifications Please read carefully before use Function introduction LCD screen Micro memory card IR Sensors Bracket hole MICROPHONE RESET Included with your Pony Dash Cam Pony Dash Cam 12v Car Charger Mini USB Cable Micro memory card Suction Cup Windshield Mount Dash Mounting Disc Operating Your Device 1 Charging A Using the built in rechargeable lithium battery Charging options 1 Connect the Dash Cam to the car charger 2 Connect the Dash Cam to your computer using the USB cable When charging through the car charger the battery display in the bottom right of the screen will flash indicating that the unit is charging A red light will illuminate on the left side of the Dash Cam whenever the camera is charging o Note For first charge a minimum of 6 hours is recommended B Dash Cam connected to the 12v car charger When the 12v car charger is plugged into your vehicle s 12v outlet and the Dash Cam is connected after starting the car the device automatically turns on and enters video mode it will begin to record The device will continue recording while charging When the car is turned off the device k
3. e Japanese Russian Korean 4 Light Frequency 50 Hz 60 Hz Set to 60 Hz for North America x Screen Saver 1 Minute 3 Minutes 5 Minutes Off Image Rotate On Off Flips the screen for recording on windshield or dashboard Format Cancel OK Default Setting Cancel OK Resets your Dash Cam to factory default settings ey Firmware Version Displays the software version number Note Use the OK button to navigate between month day year and time Once the correct time and date are displayed press the MENU button ll to activate Note When screen saver is on the Dash Cam s display screen will shut off after the chosen time of inactivity 1 3 5 minutes the Dash Cam will continue recording To turn the screen back on simply press any button N ote CAUTION performing a format of the memory card will erase ALL data on the card included locked files WARNING THIS DEVICE SHOULD NOT BE ADJUSTED BY THE DRIVER WHILE DRIVING IN THE EVENT OF AN ACCIDENT DEVICE MAY DISLODGE AND BECOME UNSAFE FOR PASSENGERS Notice 1 Please insert memory card before recording 2 The Original Dash Cam supports memory cards up to 32GB 3 Please attach unit by applying firm pressure to mount before mounting on surface 4 When the lithium battery is depleted the Dash Cam screen shows Batteries depleted The camera will shut down automatically after 20 seconds and save the files automatically 5 If you need to r
4. eeps working and will turn off five seconds later saving the recorded files automatically if your vehicle s 12v outlet stays active when the car is turned off it is recommended to unplug your Dash Cam before leaving your car Alternatively you can choose to turn the camera off using the power button 2 the files will be automatically saved Note The Dash Cam is designed to be plugged in continually while driving leaving the unit plugged in for long periods of time will not harm the camera 2 Functions introduction This camera has three modes Video mode Still Photo mode Playback mode To switch between modes when the camera is NOT recording press the MODE button A Video mode a video camcorder icon will display in the top left of the screen wa Memory card must be inserted After pressing and holding the power button or connecting the Dash Cam to the car charger the camera turns on and enters video mode The Dash Cam will automatically begin recording To stop recording press the OK button l To turn off the device press and hold the power button a Whether you stop recording using the OK button or you simply power down the Dash Cam using the power button your video will be stored Note Pressing the OK button in video mode starts and stops recording Note Pressing the mode button while the Dash Cam is recording will lock and store the current video the top of the screen will display this lock key icon
5. eset the Dash Cam press the RESET button for 3 seconds 6 For questions or technical support visit 4Sight at www GetDashCam com
6. hoose the highlighted setting by pressing OK J Video Settings Resolution 1080FHD 1920x1080 1080P 1440x1080 720P 1280x720 WVGA 848x480 VGA 640x480 QVGA 320x240 Loop Recording Off 1 Minute 3 Minutes 5 Minutes EV Exposure Value 2 0 5 3 4 3 1 2 3 1 3 0 1 3 2 3 1 0 4 3 5 3 2 0 Motion Detection On Off Audio On Off Date Stamp On Off EG Sensor 2G 4G 8G Off Button Sound On Off Higher resolution has higher picture quality but also takes more memory to store files When this option is turned on the camera will record in for example 3 minute video clips when the memory card is full the camera will then overwrite the oldest video file and store the newest allowing you to continue recording while never having to change the memory card The Dash Cam s G Sensor Gravity Sensor locks and stores video on sudden impact so it will not be overwritten by the camera s loop recording function This menu setting adjusts the sensitivity of this sensor with 2G being the most sensitive and 8G being the least Still Settings 8 Timer Single 2s Timer 5s Timer 10s Timer Resolution 12M 4032x3024 10M 3648x2736 8M 3264x2448 5M 2592x1944 3M 2048x1536 2MHD 1920x1080 VGA 640x480 1 3M 1280x960 Sequence On Off Quality Fine Normal Economy kal Sharpness Strong Normal Soft White balance Auto Daylight Cloudy Tungste
7. n Fluorescent 58 Color Color B amp W Sepia EV Exposure Value 2 0 5 3 4 3 1 0 2 3 1 3 0 0 1 3 2 3 1 0 4 3 5 3 2 0 Bg ISO Auto 100 200 400 Anti Shaking On Off 7 Quick Review Off 2 seconds 5 seconds Date Stamp Off Date Date and Time Note When sequence is turned On one press of the OK button will take a sequence of three pictures Note When turned on quick review allows you to quickly review the picture you have just taken for the chosen amount of time Playback Settings Delete Delete Current Delete all Protect Lock One Unlock One Lock All Unlock All Note Choosing Delete Current will delete the file that was on screen when entering the playback settings menu Choosing Delete all will delete all unlocked files on the memory card Note Locked videos cannot be deleted until they are unlocked with one exception formatting the memory card will erase all files on the memory card including locked videos Setup Menu In addition to the mode settings pages from any mode you can access the Setup Menu by pressing the MENU button El twice camera must NOT be recording to access menus Set Date Time Using the UP and DOWN buttons M set the correct time and date O Auto Power Off Off 2 Minutes 5 Minutes 10 Minutes ra K Language English French German Italian Spanish Simplified Chinese Traditional Chines
8. the OK button to stop recording Press the MODE button il twice to enter into Preview mode You can scroll through previews by pressing the UP and DOWN buttons Hf B In the top right of the display screen the file name is displayed When the file you wish to playback is displayed on screen press the OK button to begin playing the OK button will play and pause the current video To fast forward a video use the DOWN button up to 8x fast forward speed To rewind a video use the UP button a up to 8x rewind speed Note When playing a video the video time will display in the top left of the display screen below the file name Note Once a video is playing the menu button E becomes inactive Stop the video playback by pressing the mode button and the menu button will reactivate Note If the file displays the lock icon on the top of the screen the current video is locked it can only be deleted by formatting the memory card 3 Settings Menu functions Each of the Dash Cam s three modes has its own settings menu Video Settings Still Settings Playback Settings To access the settings menus from any mode be sure the camera is NOT recording To enter Video settings press the MENU button El from video mode To access Still settings navigate to Still Photo mode and press the MENU button ll To access Playback settings navigate to Playback mode and press the MENU button Ill Navigate the menus by using the UP and DOWN buttons B c

Download Pdf Manuals

image

Related Search

Related Contents

  Milwaukee 58-03-0475 User's Manual    ペツル 取扱説明書 レーザーソニック  gripone pro 2  Sweex SA727  Manual de usuario terminal operadora 5420  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.