Home
Owners Manual - QRS Music Technologies
Contents
1. TRACK NO INDEX PGM NO MIN SEC REPEAT MEMORY PLAY REPEAT MEMORY MUSI KIP wai gt Your CD Plaver with Left and Right Channel outputs Wireless Transmitter Receiver V Channel Cat No 50088 I The Transmitter plugs into the Left channel output of your CD Player and transmits the piano signal to the receiver which is mounted under the piano QRS Pianomation 2000CD Serial QRS Music Inc P N 75390 2011 Seward Avenue Naples FL 34109 Power Rating 90 240VAC 15 VA max LINE OUT LINEMIN LEFT ami LIEFT MIDI OUT TERMS MIDI IN MIDI THRU EXT IR TO PROCESSOR BOARD SENSOR Right Channel PAN POWER 90 TO 240 VAC 15VA max The self amplified speaker Cat No 71040 is mounted on one of the beams under the piano It is connected by a standard RCA audio cable The power cord from the speaker is plugged into the Pianomation power supply The 2000CD must be connected to the Pianomation Processor cat No 60108 This is done with a DB15 User Box Cable Cat No 811460 The Processor is mounted on the one of the beams under the piano Optional External IR Sensor Cat No 70394 This can be mounted any where on the piano to make it more convenient for you to use your remote to control the 2000CD It plugs in like a phone jack 799 Wireless
2. Z000C Z000CD OWNER S MANUAL Item 75390 75395 Manual 75395 Rev 1 01 tT QRS Pianomation 2000C QRS Music Technologies Inc 2002 ORS Music Center QRS Business Center See piano rolls manufactured Stop by any time to see and hear the Ask for a demonstration of Pianomation MIDI vibrant sounds of Pianomation MIDI Two tours daily at 10 a m and 2 p m Our Naples Florida location 15 devoted to the Monday through Friday year round We are development of automated record and playback closed weekends and the days surrounding systems that can be installed in virtually any major holidays Any doubts as to open acoustic piano the various options are on dates can be resolved by letter or phone display at this location ORS Music Technologies Inc QRS Pianomation Center 1026 Niagara Street 2011 Seward Avenue Buffalo NY 14213 2099 Naples FL 34109 1 716 885 4600 1 239 597 5888 1 716 885 7510 Fax 1 239 597 3936 Fax Story amp Clark Pianos r West Coast Facility See pianos manufactured Stop by any time to see and hear the Ask for a demonstration of Pianomation MIDI vibrant sounds of Pianomation MIDI QRS is the only manufacturer of Roll Player Pianos in the world In addition to producing player pianos Story amp Clark also manufactures a line of console pianos and pianos equipped with Pianomation MIDI systems Tours are available You will see every phase of ma
3. Plug the audio cable into the tape out of the AMI Wireless Transmitter Receiver Cat No 50088 step 4 Plug the audio cable into the Left channel in on the 2000CD The self amplified speaker Cat No 71040 is mounted on one of the beams under the piano It is connected by a standard RCA audio cable The power cord from the speaker 15 plugged into the Pianomation power supply 18 The 2000CD must be connected to the Pianomation Processor cat No 60108 This is done with a DB15 User Box Cable Cat No 811460 The Processor is mounted on the one of the beams under the piano Optional External IR Sensor Cat No 70394 This can be mounted any where on the piano to make it more convenient for you to use your remote to control the 2000CD It plugs in like a phone jack This cord provides power to the 2000CD and the Pianomation System It must be plugged into the extension cord provided DO NOT PLUG IT INTO THE POWER SUPPLY Adding an external sound module or a microphone mixing with the background music to broadcast through the home or establishment Background Music plugs into the mixer input MIDI OUT MIDI IN Amplifier AUXIN AUXIN O O O Sound Module Output or QRS Pianomation 2000CD Serial 5 CAUTION QRS Music Inc P N 75390 DO NOT OPEN A 2011 Seward Avenue Naples FL 34109 Power Rating 90 240VAC 15 VA max AC POWER ANTE
4. Piano Hookup with dual wireless 17 2000CD Piano Hookup with wireless from your 18 How to mic the piano for whole house distribution 19 ORS PlayerJACCOSSOFIOS a uuu u o 20 23 Pianomation Wiring Dia gram 24 Hepu yumuu End eua Saee us 29 Pianomation Piano Information 26 Welcome Congratulations on choosing the 2000C 2000CD one of our award winning player piano systems The 2000C 2000CD retrofit kit was designed to turn an acoustic piano into a state of the art player piano The system can be installed into almost any grand or upright piano new or old Overview 2000C 2000CD ensures that your piano will retain its original beauty and sound The moment you insert a special CD into the almost invisible controller 2000C 2000CD brings your piano magically alive Enjoying piano music at its best is as close as the touch of a button The easy to use remote control gives you the convenience you are accustomed to with your audio devices Familiar controls like Play Stop Preset Volume and Track Select make this sophisticated system as easy to operate as your CD player 2000C 2000CD equipped player piano captures all the musical expressions of the original performing artist Then 2000C 2000CD goes further providing dazzling accompanimen
5. Tech Pianomation Tech Serial number of Pianomation Serial number control box 26 Index Accessories 20 23 Analog MIDI Input 9 13 AUX Input 9 13 Basic Operation 8 14 Bass 7 8 Batteries 7 Concert Volume 12 Connecting External Devices 16 19 How to insert and remove CDs 12 IR Sensor 11 14 LED Display 11 Line Out 9 13 Master Volume 7 MIDI IN OUT 9 13 14 Mute Piano Mute 7 8 Next Track 7 12 Orchestra Balance 7 Orchestra Bass 7 Orchestra Treble 7 Pause 7 11 Play 7 11 Power Adapter Cord 10 14 Power ON OFF 7 8 11 Previous Track 7 12 Index Random Play 7 11 Remote Control 7 Repeat Play 7 Safety Instructions 35 6 Stop 7 11 Source Select 7 11 Table Of Contents 3 Track Selection 7 12 Treble 7 8 Troubleshooting 25 Volume 7 8 12 Warranty 15 27 d pm ANOMA TION QRS Music Technologies Inc 2011 Seward Ave Naples FL 34109 239 597 5888 239 597 3936 Fax www qrsmusic com Copyright 2002 QRS Music Technologies Inc All rights reserved
6. Transmitter Receiver Channel Cat No 50089 The Transmitter plugs into the right channel output of your CD Player and transmits the background music to the receiver which is mounted under the piano The Receiver plugs into the Right channel input on the 2000CD This cord provides power to the 2000CD and the Pianomation System It must be plugged into the extension cord provided DO NOT PLUG IT INTO THE POWER SUPPLY 17 Basic 2000CD Piano Hookup W Wireless Transmission From Your Computer This hookup is used if you want to use a computer to operate your Pianomation System from another room It will transmit the piano signal to the piano wirelessly Parts required Cat No 50088 Transmitter Receivers Cat No 50060 AMI Cat No 50105 Female Midi Game Cable LINE OUT LINE IN LEFT ami LEFT RIGHT Step 1 Step 2 Plug cable Into Plug male MIDI Sound Card connector Into MIDI IN on the AMI MIDI Game Cable Cat No 50105 QRS Pianomation 2000CD Serial QRS Music Inc P N 75390 2011 Seward Avenue Naples FL 34109 Power Rating 90 240VAC 15 VA max MIDI OUT MIDI THRU MIDI IN TO PROCESSOR BOARD AMI Cat No 50060 PE aS AC POWER 90 TO 240 VAC 15VA max EXT IR SENSOR Step 3
7. audiologist The product should be located so that its location or position does not interfere with its proper ventilation This product should only be located away from heat sources such as radiators heat registers or other products that produce heat The product should only be connected to the type of power supply described in the operating instructions or as marked on the product This product may be equipped with a polarized line plug one blade wider than the other This 1s a safety feature If you are unable to insert the plug into the outlet contact an electrician to replace your obsolete outlet Do not defeat the safety purpose of the plug The power supply cord of the product should be unplugged from the outlet when left unused for a long period of time Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings The product should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged or B Objects have fallen or liquid has been spilled into the product or C The product has been exposed to rain or D The product does not appear to operate normally or exhibits a marked change in performance or E The product has been dropped or the enclosure damaged Do not attempt to service the product beyond that described the user maintenance instructions All other servicing should be referred to qualified service per
8. check that the volume control of the speaker is set at about of full clockwise rotation Increase the volume setting to at least half volume Contact the dealer and arrange to have 2000C 2000CD technician recalibrate your player using a specially designed Calibration Box 2000C 2000CD can play two types of player piano CD formats Usually the player is able to automatically detect which type has been loaded Some CDs may fool the auto detection process most often because of the presence of dirt or scratches on the CD A squeal like noise 15 the result When this happens it Is necessary to manually select the correct CD format referred to as C1 or C2 on the display of the Serenade Press the CD source button repeatedly to select the alternate CD source Lightly press a stout wire such as a straightened paper clip into the hole in the front of the drive door The drive door will unlatch and the CD can be removed If problem persists call service Check that the CD playing surface 15 clean and free of scratches Use CD cleaner if necessary Check that the CD drive is clean free of dust dirt lint hair etc Use a CD drive cleaner if necessary Check that there are rubber grommets between the piano keybed and the 2000C 2000CD mounting brackets if not call service Pianomation Piano Information Date Type of piano Make of piano Finish of piano serial number of piano Piano purchased from Piano Tuner
9. firmly plugged into the jack on the back of the 2000C 2000CD labeled DC 12 V Make sure the power switch on the power strip mounted on the underside of the piano grand pianos is in the ON position Make sure you aim the remote at the front of the 2000C 2000CD when you press the POWER button Replace batteries in the remote with two AAA alkaline batteries Press the PLAY button Current track is displayed and right period flashes Press the VOLUME UP button on the remote control several times until the display reads U7 If piano begins to play adjust volume to the desired level Make sure the CD SOURCE has been selected Press the CD button on the remote until C1 or C2 is displayed Switch the 2000C 2000CD OFF Make sure that the solenoid system cord is connected to the back of the 2000C 2000CD at the connector labeled TO PROCESSOR Make sure the remote is pointed towards the front of the 2000C 2000CD when pressing the buttons Replace batteries in the remote with two AAA alkaline batteries Press the BALANCE UP button on the remote until the display shows b7 or higher Switch the Serenade CD OFF Make sure the speaker audio cable is plugged into the OUT L jack on the back of the Serenade CD Make sure the CD you are playing has orchestration See Software Catalog for description Switch the 2000C 2000CD OFF Make sure the speaker is plugged into the power strip and the speaker power switch is turned on Also
10. local authorized distributor or contact ORS Music Technologies Inc 2011 Seward Ave Naples FL 34109 CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL INSTRUCTIONS PERTAINING TO A RISK OF FIRE ELECTRIC SHOCK OR INJURY TO PERSONS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product GROUNDING INSTRUCTIONS This product must be grounded If it should malfunction or breakdown grounding provides a path of least resistance for electric current to reduce the risk of electric shock This product is equipped with a cord having an equipment grounding conductor and a grounding plug The plug must be plugged into an appropriate outlet that 15 properly installed and grounded in accordance with all local codes and ordinances DANGER Improper connection of the equipment grounding conductor can result in a risk of electric shock Check with a qualified electrician or serviceman if
11. push buttons When you are playing QRS compact discs the audio will be heard in emulated stereo taking advantage of the stereo configuration NOTE When using standard music discs through the 2000 depending on the actual music you may notice the very beginning of the first song of the disc being clipped off This is especially true for very slow fade ins This 15 because the onboard computer does not know what signal 1s coming in until it actually sees it This possible muting 1s normal and helps assure that when the 2000C is being driven with standard QRS MIDI discs you won t hear a burst of the MIDI data at the beginning of the song 1 Right channel line input Connect to the right channel output of your CD player VCR etc 2 Left AMI channel line input Connect to the left channel output of your CD player VCR etc 3 Right channel output Connect to the right channel input of your powered speaker or stereo amplifier receiver This connection would be used as a single mono speaker 4 Left Channel output Connect to channel input of your powered speaker or stereo amplifier receiver This connection would be used as a single mono speaker 5 MIDI OUT port Connect to the MIDI input of any standard MIDI device The MIDI source for the port is derived from the left LINE IN AMI signal 6 MIDIIN port Connect to the MIDI output of any standard MIDI device When driving the Pianomation by means of the MIDI IN port
12. system such as a home entertainment system or powered speakers The signal at these connectors is dual mono when playing a QRS Pianomation disc and true stereo when playing a standard music CD or when receiving a non QRS signal from an external source Whatever the input source the 2000CD applies volume and tone control to these outputs LINE IN AMI LEFT This connector provides a means of receiving an AMI signal from an external source such as a or remotely located CD player When an external source 15 received at this connector and is recognized as an AMI signal the 2000CD automatically switches its LINE OUTPUT 2 amp 3 to dual mono This allows both left and right speakers a system to produce sound without the need for a manual source selector When the signal 15 a standard music source not containing an AMI signal the LINE OUTPUT 2 amp 3 automatically switches to true stereo LINE IN RIGHT This connector 1s used for the right channel of an external source This input does not detect for AMI signal but only provides a way of bringing in the right channel music of a QRS CD or standard music CD NOTE For the LINE INPUT to be functional you must select IN from the Fl menu or press STOP then TRACK on the front panel MIDI OUT is a standard MIDI output to drive external devices Its source 1s either the internal CD or LEFT AMI LINE INPUT MIDI IN is a standard MIDI input Use this input to drive the Pianomation syst
13. you are in doubt as to whether the product is properly grounded Do not modify the plug provided with the product If it will not fit the outlet have a proper outlet installed by a qualified electrician Important Safety Instructions This instrument is capable of producing extremely high volume levels Adjust the MASTER VOLUME to the softest position before turning on or playing the piano Gradually adjust the volume to suit your taste by adjusting the MASTER VOLUME while playing the instrument You can damage your hearing by playing this instrument too loud When using this instrument at high volume levels such as public performance use appropriate ear protection WARNING When using electric products basic precautions should always be followed l 2 10 11 12 including the following Read all instructions before using the product To reduce the risk of injury close supervision 1s necessary when a product 15 used near children Do not use this product near water for example near a bathtub washbowl kitchen sink m a wet basement near a swimming pool or the like This product either alone or in combination with an amplifier and headphones or speakers may be capable of producing sound levels that could cause permanent hearing loss Do not operate for a long period of time at a high volume level or at a level that is uncomfortable If you experience any hearing loss or ringing in the ears you should consult an
14. D Player to send the audio background music to the piano s speaker 4 IR Sensor Cat No 70394 USE The IR sensor can be located anywhere on the piano to extend the use of the remote control to different parts of the room 5 Pedal Solenoid Cat No 70130 USE Raises and lowers the damper tray 6 Sostenuto Cable Trap work Push Type Cat No 70895 Pull Type Cat No 70896 Steinway Type Cat No 70897 USE To make the sostenuto functional 2 order call 1 800 247 6557 QRS Player Accessories 1 Remote control Cat No 71398 USE Controls the Serenade CD NOLLVINONVId 2 Opto Isolator Cat No 70411 USE This unit is used for home hookups when the CD player is connected to the QRS Player System with a hard wire setup Used in the case where a hard wire setup results in sporadic play eliminating grounding issues 3 Smart Switch Cat No 78000 978 USE This device will automatically switch from several ARS ws different sources i e CD player VCR PC Will also switch between audio CDs and Pianomation CDs STEREO INB INA SMART SWITCH 4 Barcus Berry Piano Mic Cat No 70046 USE Picks up the piano sound off the soundboard Used for amplifying the piano orchestrated music through a stereo 5 Piano Audio Mixer Cat No 70530 USE Balances the background music with the piano music for amplifying the piano sound through a stereo 6 PianoTunes Cat N
15. N MIDI THRU 90 TO 240 VAC 15VA max EXT IR SENSOR The self amplified speaker Cat No 71040 is mounted on one of the beams under the piano It is connected by a standard RCA audio cable The power cord from the speaker is plugged into the Pianomation power supply The 2000CD must be Optional External IR This cord provides connected to the Sensor power to the Pianomation Processor Cat No 70394 2000CD and the cat No 60108 This is This can be mounted any System done with a DB15 User where on the piano to It must be plugged Box Cable Cat No make it more convenient into the extension 811460 The Processor is for you to use your cord provided mounted on the one of the remote to control the DO NOT PLUG IT beams under the piano 2000CD It plugs in INTO THE like a phone jack POWER SUPPLY Cables Required 6 Ft Male RCA to Male RCA cable User Box Cable 16 Basic 2000CD Piano Hookup W Dual Wireless This hookup is used if you want to use an external CD Player to operate your Pianomation System It will transmit the piano signal and the background music to the piano wirelessly Parts required Cat No 50088 amp 50089 Transmitters and Receivers A Smart Switch Cat No 78000 be used with a multi disc player if you want to mix normal CDs with Pianomation CDs This requires no button pushing to eliminate the piano signal from the speakers
16. NNA MIDI THRU 90 TO 240 VAC 15VA max EXT IR SENSOR The self amplified speaker Cat No 71040 is mounted on one of the beams under the piano It is connected by a standard RCA audio cable The power cord from the speaker is plugged into the Pianomation power supply The 2000CD must be Optional External IR connected to the Sensor Pianomation Processor Cat No 70394 cat No 60108 This is This can be mounted any done with a DB15 User where on the piano to Box Cable Cat No make it more convenient 811460 The Processor for you to use your is mounted on the one of remote to control the the beams under the piano 2000CD It plugs in like a phone jack CD IN O O Audio Output plugs into the audio Input of the mixer Piano Mic output This cord provides power to the 2000CD and the Pianomation System It must be plugged into the extension cord provided DO NOT PLUG IT INTO THE POWER SUPPLY 19 QRS Player Accessories 1 Self Powered Speaker Cat No 71040 USE This speaker mounts under the piano and amplifies the orchestrated music Mounting Bracket included 2 Wireless Transmitter Receiver Cat No 50088 or 50288 USE This unit is used for home hookups using the customer s CD Player to send the MIDI signal to the piano 3 Wireless Transmitter Receiver Cat No 50089 or 50289 USE This unit is used for home hookups using the customer s C
17. ally used to connect PCs Floppy disk players to QRS Player System or Directly to the Pianomation MIDI Processor 2 order call 1 800 247 6557 QRS Player Accessories 1 Orchestrated Cable Pack Cat No 70207 USE This pack is used for home hookups It allows the customer to select between audio CDs and QRS CDs on their stereo amplifier 2 Audio Cables Male to Male RCA 3ft Cat No 70133 6ft Cat No 70131 12ft Cat No 70134 20ft Cat No 70135 USE For connecting CD Video amp DVD Players to The QRS Player System 3 Audio cables Twin Male RCA to RCA Cat No 70209 USE For connecting CD Video amp DVD Players to QRS Player System This is for both left and right channels 4 Audio Cable Splitter 1 Male to 2 Females Cat No 70213 USE For splitting the outputs of the CD Video amp DVD players 5 Mini Stereo cable to Left amp Right Male RCA Cat No 70367 USE Plugs into a portable CD player and splits the cable into left amp right male RCA connectors 6 RCA Barrel Connector Cat No 70166 USE Joins 2 male audio cables together 7 MIDI Barrel Connector Cat No 70158 USE Joins 2 MIDI cables together USE This pack is used for home hookups It allows the customer to select between audio CDs and QRS CDs on their stereo amplifier To order call 1 800 247 6557 lagram D iring Pianomation W QRS Pianomation Wiring Diagram Driver Board Driver Board Driv
18. ay is pressed 19 PLAY 20 Transpose music Not Available Qv R S PIANOMATION MIDI 21 Tempo control for the speed of the song Not Avallable 22 Increases audio volume only 23 Increases piano and audio volume 24 Decreases audio volume 25 Decreases piano and audio volume Balance Program Display reads Pr To set program press desired track numbers then Play To Pressed 1 time Balances between left and right for stereo audio CD not Pianomation CD Use with any up and down volume key for panning left right F1 Control Pressed 2 times Pressed 1 time Recognizes the 2000CD player Displays Pressed 2 times Recognizes an auxiliary CD changer Displays Ln Pressed 3 times Recognizes an auxiliary CD changer with a wireless receiver Displays rF Display reads d4 Indicates no delay between audio amp piano play Note For speakers that are far from piano adjustment will be required To adjust the synchronization of audio amp piano play use the track selection numbers 0 to 3 decreases delay time 5 to 9 increases delay time Press 3 times then press any Volume UP arrow For recommended concert level playback 2000C Front Panel Description QRS Pianomation 2000C o Power O IR Sensor 11 2 3 4 2 0 T 6 9 TIP When adjusting parameters briefly tap the buttons to make changes one increment at a time Pressing and holding a button will step through its enti
19. em from an external MIDI source such as a computer NOTE This input 15 always active Using this input at the same time the 2000CD is receiving signal from its internal CD or an external source 15 not recommended 13 10 11 12 2000CD Back Panel Description ee LINE OUT LINE IN LEFT ami LEFT QRS Pianomation 2000CD Serial QRS Music Inc P N 75390 2011 Seward Avenue Naples FL 34109 Power Rating 90 240VAC 15 VA max AC POWER ANTENNA MIDI OUT 90 TO 240 VAC 15VA max EXT IR MIDI IN MIDI THRU SENSOR 91011 12 MIDI THRU is a duplicate of the MIDI being received at the MIDI IN connector ANTENNA For future use TO PROCESSOR BOARD This DB 15 connector is connected to the Pianomation processor NOTE DO NOT CONNECT THIS TO ANY OTHER DEVICE AS DAMAGE TO THE UNIT WILL OCCUR IN This indicator light should be lit whenever the 2000CD is playing from its internal CD or when it is receiving AMI signal at its LEFT AMI LINE IN This light is helpful in troubleshooting problems such as defective audio cables CDs external CD players etc ER This indicator should remain off during normal use of the Pianomation system The ER light does not indicate any conditions with the 2000CD When this light indicates a condition with the Pianomation system itself See Pianomation user manual for error descriptions EXT IR SENSOR This port makes it possible to locate t
20. er Board DOnver Board Onver Board Onver Board 70122 70122 70122 70122 70122 70126 OPTIONAL ss a 9s 88 Note C ppp EINEN Bass Reverse Nola Driver Signal amp Power Cable for upright installations Note Driver Power Cable 80 Note 811437 88 Note 811495 Note Driver Signal Cable for 80 nota 70139 or 88 note amp 11496 system Power Supply QRS Processor Test amp Weer Conil Pable Cm BOI Ca Wo El 1438 T r sius mim re a BERES HEEE es VER 2 Supply Cable Cai No 311434 r3 Li BATCHED OUTLET Processor Board a 60100 User Box Cable 70329 DB15 to DB15 Dom Une I I JDE oe User Box PRT Chere ary Fe ue 2 S 70390 75390 cr MEG ma Pi 70395 75395 nn Power Cord Wall Cult DG Adaptor Power Cord 70214 from User box ae AT if Power Strip da Pedal Solenold g 4 70130 24 Troubleshooting Helpful Hints If you have difficulty operating your 2000C 20000 thoroughly read the Owner s Guide If you cannot locate and solve the problem it is sug gested that all accessible cables be checked for proper and tight connections If one CD does not function properly you should try another CD to see if the problem is related to the CD that you a
21. er or QRS tech support for instructions EXT IR SENSOR This port provides you with the ability to add an optional remote control sensor This 1s convient when you want to hide the 2000C under the piano while retaining remote control functionality Power Inlet This is where the low voltage end of the AC adaptor plugs in NOTE Use only the power adaptor provided by QRS An adaptor with the incorrect characteristics could result in damage to your system NOTES 10 2000CD Front Panel Description QRS Pianomation2000CD ON OFF LO J b PIANO AUDIO STOP LAY VOLUME J VOLUME RACK 123 456 7 8 9 Overview The keypad 15 used for entering commands to the system of the main functions can be accessed from this keypad These functions are repeated on the handheld remote control See the remote control manual for a description of remote control functions The Display Area provides the following information to the user Standby indicator lights when power is off When power is turned on the two digit display lights up and standby light goes out The two segment LED displays how many tracks are on a disc which track is currently playing or a mode and value when an adjust mode is active such as Bass Treble Volume etc Included at the bottom corner of each display segment is a LED dot The left most segment dot blinks when the 2000CD 1s receiving IR signal from the remote control and the right most segment dot b
22. he 2000CD in a hidden position and still maintain line of sight operation from the hand held remote control AC POWER Connect the 2000CD to your 120 VAC wall outlet with the provided power cable only This power inlet is compatible with line voltage ranging from 90 to 240 50 or 60hz This wide input range makes international usage trouble free 14 Warranty Limited Warranty 2000C 2000CD Limited Warranty QRS Music Technologies Inc Manufacturer warrants 2000C 2000CD products to be free of manufacturing defects in material or workmanship as described below If your 2000C 2000CD product should prove defective in material or workmanship within two 2 years from the date of purchase manufacturer will provide replacement parts without charge upon verification and presentation of satisfactory proof of purchase Manufacturer will provide or arrange for service labor to correct defects in workmanship for a period of one 1 year at no cost This warranty does not apply to defects resulting from abuse neglect accident improper repair modification or unreasonable use of the unit resulting in cracked or broken case parts or units damaged by excessive heat or humidity This warranty also does not cover routine tuning or adjustments required because of normal use and wear or damage caused by any repair or service by anyone other than a 2000C 2000CD dealer This warranty and the extent of the responsibility of
23. hen connecting this product to accessories and or another product use only high quality shielded cables Cables supplied with this product MUST be used Follow all installation instructions Failure to follow instructions could void your FCC authorization to use this product in the United States of America NOTE This product has been tested and found to comply with the requirements listed in the FCC Regulations Part 15 for Class digital devices Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices This equipment generates uses radio frequencies and 1f not installed and used according to the instructions found in the Installation Manual may cause interference harmful to the operation of other electronic devices Compliance with FCC regulations does not guar antee that interference will not occur in all installations If this product is found to be the source of interference which can be determined by turning the unit OFF and ON please try to eliminate the problem by using one of the following measures e Relocate either this product or the device that is being affected by the interference e Utilize power outlets that are on different circuits circuit breaker or fuse or install AC line filters If these corrective measures do not produce satisfactory results please contact the
24. king a piano Our newest location in Las Vegas NV services the west coast for all their Pianomation needs In addition to a Pianomation warehouse and installation facility there is a piano outlet showcasing the entire Story amp Clark piano Please call ahead for reservations line Story amp Clark Pianos QRS West Coast Center 269 Quaker Drive 6410 Sunset Corporate Drive Seneca PA 16346 Las Vegas NV 89120 1 814 676 6683 1 702 947 5888 1 814 676 9340 1 702 947 3936 Fax www qrsmusic com Table of Contents Table OL CONi sumy Zn amana W mh eas dede asnan asas 3 Well Ore tu EIE 4 B ond TEM 4 Choosing a Good Location 4 Proca HONS 4 WY 2 Important Safety Instructions 6 Remote Control Features 7 2000C Front Panel Description 9 2000C Back Panel Description 9 10 2000CD Front Panel Description 11 12 2000CD Back Panel Description 13 14 NN Hl nbpas EE 15 2000CD Piano Hookup 16 2000CD
25. links when the CD 1 being played indicating the drive 1s active Also included in the display area 1s the IR Sensor There is no light associated with this sensor but be aware not to cover or block this area as it will inhibit the remote control function 1 The Standby Light is Ht when the system is off It will turn off when the ON OFF button is pressed to turn the Pianomation system ON 2 POWER When in standby mode pressing this button will power the Pianomation system ON When the Pianomation system is ON pressing this button will shut system off and the standby light will turn on 3 STOP Stops the compact disc when playing from the internal CD drive 4 RAN Use this button to enter random play mode The CD will play once through the disc in a random order Pressing STOP will cancel the random play mode 5 PLAY When in stop mode pressing this button will start playing track one of the CD Pressing the Play button when the disc 15 playing will enter the PAUSE mode Press play one more time to start the disc playing When in PAUSE the two digit display flashes every second to indicate that the unit is paused 11 2000CD Front Panel Description QRS Pianomation2000CD ON OFF o gt STOP PLAY 0010 TRACK PIANO VOLUME UP and DOWN Pressing these buttons will raise and lower the piano volume respectively Pressing both buttons simultaneously will reset the piano to its optimum pe
26. make sure that the device connected to the LINE IN ports are not active This will prevent 2 songs from playing at the same time 7 MIDI THRU port Connect to the MIDI IN port of the 2000C 8 TO PROCESSOR BOARD port This DB 15 connector is the port that connects to your Pianomation processor Under circumstances should this connector be interfaced with any other device 9 IN This light is used to confirm that there is AMI signal present at the LEFT AMT line in jack This indicator is very useful for basic system trouble shooting 10 ER This light indicates a condition has occurred within the Pianomation system It is normal for this light to turn on initially after powering the system on The ER light should turn off within 3 seconds after turning the system on 11 12 2000C Back Panel Description EXT IR POWER RIGHT LEFT AMI RIGHT LEFT OOO cu TU 13 5VDC E a u LINE OUT MIDI oun nun THRU TO PROCESSOR BOARD 1 2 3 4 5 6 7 8 91011 12 NOTE It is normal for this ER light to remain on when the power 1s turned off as well as when the 2000C 1s powered on without being connected to the Pianomation processor TIP If the piano system will not play check to make sure this light is not flashing If it is flashing a condition has occurred in the Pianomation system Unplug the system from the AC outlet wait 2 minutes and reconnect Power up the system and if the condition occurs again call your deal
27. mode This is the Infrared Sensor that picks up your remote control commands To avoid problems with the remote control function do not block this window Special function Piano Sync piano to orchestration synchronization can be varied 50 milliseconds to compensate for large separations in piano and speaker placement This adjustment 1s not recommended for normal system configurations because misadjustment of sync will cause deterioration of the overall sound quality To enter sync mode press the PIANO DOWN and the MASTER UP buttons simultaneously The red power LED will turn off indicating you have entered sync mode While in the sync mode use the PIANO UP and PIANO DOWN buttons to make adjustments TIP While in sync mode pressing the PIANO UP and PIANO DOWN buttons simultaneously will set the sync back to the default settings 8 2000C Back Panel Description EXT IR BUM RIGHT LEFT AMI RIGHT LEFT EM C C C LINE IN LINE OUT MIDI Wu TO PROCESSOR BOARD 1 2 3 4 5 6 7 8 91011 12 NOTE SURE POWER ENTIRE SYSTEM IS TURNED OFF BEFORE CONNECTING OR DISCONNECTING ANY OF THESE CABLES TIP Your 2000C has been designed to recognize the difference between ORS MIDI signal and a standard music signal at the line input jacks This means if your system is configured for stereo sound you will be able to enjoy your standard compact disc library in true stereo without having to
28. o 78500 USE Does your MIDI player piano play too loud PianoTunes will give you the volume control of a stereo Consists of Mute Rail and Sound Module Speaker required To order call 1 800 247 6557 QRS Player Accessories 1 CD Keyboard Player Cat No 70381 USE This allows QRS CDs to be played on non Pianomation CD KEYBOARD PLAYER COMPACT DISC MIDI PLAYER systems i e MIDI keyboards Disklavier Pianodisc cu 2 Analog to MIDI Interface Cat No 50060 USE To make your own Pianomation CDs or used for transmitting MIDI wirelessly from a computer MIDI Interface required 3 Macintosh MIDI Interface Cat No 50096 t USE Connects to a Macintosh printer or modem port and H A mies Y provides MIDI IN and MIDI OUT capabilities E 4 PC Windows MIDI Interface Cat No 50123 USE Connects to the USB of a PC and provides MIDI IN and MIDI OUT capabilities 5 Sound Card MIDI Cable Male Cat No 50105 USE Connects to the joy stick port of your PCs sound card and gives you the capability of MIDI IN and OUT 6 Sound Card MIDI Cable Female Cat No 50115 USE Connects to the joy stick port of your PCs sound card and gives you the capability of MIDI IN and OUT MIDI cable required 7 MIDI Cables 1 ft Cat No 70150 3 ft Cat No 70151 5 ft Cat No 70371 10 ft Cat No 70152 20 ft Cat No 70153 50 ft Cat No 70154 100 ft Cat No 70155 USE Gener
29. rcumstances shall manufacturer be liable for any special incidental or consequential loss or damage Some states do not allow limitations on how long an implied warranty lasts or the exclusion of limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you also may have other rights which vary from state to state This warranty 15 the only one you will receive and no other warranty is made to you Manufacturer does not authorize any person to modify either orally or in writing the terms of this warranty To obtain warranty service for your 2000C 2000CD product 1 Contact the 2000C 2000CD dealer from whom you purchased the product or the nearest authorized dealer 2 Ifno dealer is near you call Manufacturer at 239 597 5888 3 Do notattempt to repair or disassemble product yourself Do not ship product without prior written authorization from the Manufacturer 4 Do not dispose of this warranty after it expires In the event your product requires service these instructions should be helpful in enabling you to obtain proper service 15 Basic 2000CD Piano Hookup LINE OUT LINE IN LEFT ami LEFT AMI OUT MIDI OUT QRS Pianomation 2000CD Serial CAUTION QRS Music Inc P N 75390 DO NOT OPEN 2011 Seward Avenue Naples FL 34109 Power Rating 90 240VAC 15 VA max AC POWER ANTENNA MIDI I
30. re attempting to play Next see if any of the symptoms listed below apply to your situation Some symptoms apply only to the 2000CD If not you may call your local dealer or QRS Music Technologies Inc at 239 597 5888 IMPORTANT CAUTION Take precautions when working close to high performance audio equipment because very high sound pressure levels can be unexpectedly produced Temporary or even permanent hearing damage may result Turn the power off whenever you are checking connections or control positions in under or close to the player system Any testing adjustments or service not described herein must be referred to a qualified service technician 2000C 2000CD will not power on from the power button on the front of the unit or the remote 2000C 2000CD will power on from the power button on the front of the unit but NOT from the remote 2000C 2000CD display functions but piano keys will not move and there 15 no sound from the speaker after a CD is inserted into the player 2000C 2000CD will not respond to the remote or does so intermittently Piano keys move but there is NO SOUND from the speaker the background orchestration 15 not present Some piano notes will not play properly The speaker produces an irritating squeal during play CD will not eject CD play skips or is erratic Make sure the power cord is plugged into a functioning AC receptacle Make sure the power supply connector is
31. re range rapidly Pressing this button will power the entire system ON or OFF 2 Usethe MUTE button to silence both the piano and the orchestration 3 Pressing the PIANO VOLUME UP button will increase the volume of the piano 4 Pressing the PIANO VOLUME DOWN button will decrease the volume of the piano TIP Pressing both buttons simultaneously will return the piano to the default level 5 The MASTER VOLUME UP button increases the volume of the piano and orchestration 6 The MASTER VOLUME DOWN button decreases the volume of the piano and orchestration TIP Pressing both simultaneously will return all levels to their default volume 7 Use the AUDIO VOLUME UP button to increase the volume of the orchestration 8 Use the AUDIO VOLUME DOWN button to decrease the volume of the orchestration TIP Pressing both of these buttons simultaneously will return the orchestration to its default value 9 Press the TREBLE button and use the AUDIO VOLUME UP or DOWN button to boost or cut the high end frequencies of orchestration 10 Press the BASS button and the AUDIO VOLUME UP or DOWN button to boost or cut the low frequencies of the orchestration TIP Press the TREBLE and BASS buttons simultaneously to return to their default value 11 This red LED indicates power ON and when entering TREBLE or BASS mode will turn off indicating that you have entered the BASS or TREBLE adjust
32. rformance setting AUDIO VOLUME UP and DOWN Pressing these buttons will raise and lower the audio volume respectively Pressing both buttons simultaneously will reset the audio to its optimum performance setting NOTE To make small adjustments quickly tap the buttons Holding the buttons down for any length of time will scan through the volume range rapidly TRACK UP and TRACK DOWN Pressing these buttons will skip through each track of the CD respectively NOTE To select one track at a time quickly tap the buttons Holding the buttons down for any length of time will scan through the discs tracks rapidly EJECT This button will open and close the CD tray 12 2000CD Back Panel Description QRS Pianomation 2000CD Serial CAUTION QRS Music Inc P N 75390 DO NOT OPEN A 2011 Seward Avenue Naples FL 34109 Power Rating 90 240VAC 15 VA max LINE OUT LINE IN AC POWER LEFT ami LEFT MIDI OUT MIDI IN MIDI THRU ANTERNS 90 TO 240 VAC 15VA max EXT IR SENSOR 12 3 4 5 6 7 8 9 10 II 12 AMI OUT This RCA connector provides access to the AMI signal The AMI Is the encoded MIDI information that makes the piano play Use this connection to interface with a wireless transmitter QRS coin op equipment or recording equipment This signal is output at a nominal level of 150mv LINE OUT LEFT and RIGHT This pair of RCA connectors provides standard line level signal to feed an amplifier speaker
33. sonnel SAVE THESE INSTRUCTIONS Remote Control Features 1 Mutes audio and piano tracks The Pianomationm 2000CD will remember all the settings after you turn the system off If the power cord is unplugged Displays Mu then track number and plugged back again the system will power up with the To select Track 1 9 3 To select Track 10 or 20 press 10 or 20 then 0 4 Allows you to program a sequence of tracks to play See right column Program 3 Return to beginning of track or to previous track l i d 13 6 Starts play To quit random play press STOP 7 STOP gt 2 gt gt 8 Adjusts audio bass and treble 9 0 FEE Press once then use volume UP arrows 14 9 See left column Balance 3 PGM TRK TRK RPT 15 10 Increases piano volume 4 EN 16 11 See right column 5 RND STOP PLAY PAUSE 17 12 Decreases piano volume 6 18 13 Turns complete system ON OFF BASS TREBLE TEMPO TRANS 19 14 To select Track 21 through 29 Sw 09 20 To select track 21 press this button BAL VOLUME UP 21 20 then 1 i 22 15 select Track 11 through 19 select Track 15 press this button C 24 10 then 5 25 16 Repeat This will repeat the whole CD 17 Move to beginning of next track 18 PAUSE Track number flashes until Pause or Pl
34. the Manufacturer hereunder are subject to the following conditions and limitations This warranty is non transferable and extends only in favor of the original owner and shall be valid only if the product is purchased from an authorized 2000C 2000CD dealer and remains in the possession of the original owner It is the owner s responsibility to establish the date and place of purchase This warranty is void if the serial number has been altered or removed if the product is modified in any manner which Manufacturer concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than a 2000C 2000CD dealer or if the product is damaged because of improper operation and or maintenance in accordance with the owner s manual Manufacturer reserves the right to make changes in design and or improvements upon its products without obligation to include these changes in any products previously manufactured Except to the extent prohibited by applicable law all implied warranties made by Manufacturer in connection with this product are limited in duration to the applicable warranty period set forth before and no warranties whether expressed or implied including warranties of MERCHANTABILITY or fitness for particular purposes shall apply to this product after said has expired The consumer s sole remedy shall be such replacement of defective parts as 15 expressly provided above and under no ci
35. ts recorded by orchestras and bands Many of the CDs have vocal tracks recorded by noted artists The expansive CD library will satisfy your every musical wish Choosing a Good Location To prevent excessive internal heat buildup in the electronic components place the piano in a location with sufficient air circulation Do not install the piano Near heat sources such as radiators or hot air ducts e Indirect sunlight e In places where excessive dust mechanical vibrations or shocks exist Precautions Operate the unit only on 120 Volts AC 60 Hz Unplug the unit from the wall outlet if it is not going to be used for an extended period NOTE If the unit is plugged into AC power source it 1 still energized even when the switch 15 off Mail in your registration Please take a few moments right now to fill in and mail the Registration Card Doing so will entitle you to full warranty protection and enables us to better serve you Review all safety information Please review all care and safety information included in this manual This includes information provided as part of compliance with UL and FCC standards Warnings FCC INFORMATION IMPORTANT NOTICE DO NOT MODIFY THIS UNIT This product when installed as indicated in the Installation Manual meets FCC requirements Modifications not expressly approved by QRS Music Technologies Inc may void your authority granted by the FCC to use this product IMPORTANT W
Download Pdf Manuals
Related Search
Related Contents
électrochirurgie 公民館だより (1499kbyte) JVC KW-NT510HDT Specification Sheet User Manual - Gill Instruments BPM-60 & BPMD-60 取扱説明書 ハンドシャワー here - Artel Generatore d`aria calda a basamento serie PK The Hp Scanjet 5530 Photosmart Scanner Scans Up To 24 ARGO CLIMA caldaia wally 24 SE Copyright © All rights reserved.
Failed to retrieve file