008532_M_Inst P&S.FH11
Contents
1. Remote control E 15 V from external power suply OPTION A OPTION B USB MP3 Player Line IN input by RCA NOTE To prevent radiofrequency interference is strongly recommended keeping a distance of at least 1 m between modules with the same reference number Please avoid grouping modules PLAY amp SOUND series products References Note 41513 Wall radio 2 2 W stereo with FM RDS and mains voltage from 115 to 230 V 50 60 Hz If its necessary to amplify the output power of the 41517 sound unit we recommend using the following power amplifiers 41514 Remote control for the new PLAY amp SOUND ref 41517 41018 and 41019 products E17G D 20 W mono at 4 Q or 10 10 W stereo at 2 Q 41515 Bluetooth sound unit with AUX TV and PIN inputs 2 2 W 115 230 V 40425 30 W mono at 8 Q or 15 15 W stereo at 4 Q 41517 Master sound amplifier 6 6 W with bluetooth FM RDS multiroom and AUX IN signals on ballast format 40430 100 W mono at 2 Q or 50 50 W stereo at 4 Q or 25 25 W stereo at 4 Q at the same time that 50 W at 2 Q for 41518 Auxiliary module for 41513 Wall Radio with line in Input USB memory player headphones output and bluetooth mono subwoofers Note Remember that in addition to operating only in Bluetooth mode to get maximum performance with FM multiroom clock alarm and INPUT we recommend to acguire the remote control 41514 The sound unit must be connected to a mains voltage betw2. A 41513 41518 115 230 V 15 50 60 Hz m PLAY amp SOUND series products References Note 41513 Wall radio 2 2 W stereo with FM RDS and mains voltage from 115 to 230 V 50 60 Hz If its necessary to amplify the output power of the 41513 sound unit we recommend using the following power amplifiers 41514 Remote control for the new PLAY amp SOUND ref 41517 41018 and 41019 products 03001 3 3 Wat 4Q 41515 Bluetooth sound unit with AUX TV and PIN inputs 2 2 W 115 230 V E17G D 20 W mono at 4 Q or 10 10 W stereo at 2 2 41517 Master sound amplifier 6 6 W with bluetooth FM RDS multiroom and AUX IN signals on ballast format 40425 30 W mono at 8 Q or 15 15 W stereo at 4 Q 41518 Auxiliary module for 41513 Wall Radio with line in Input USB memory player headphones output and bluetooth 40430 100 W mono at 2 Q or 50 50 W stereo at 4 Q or 25425 W stereo at 4 Q at the same time that 50 W at 2 Q for mono subwoofers COR D S AIR RADIO s7 ome gt Bluetooth HIGH QUALITY SOUND multiroom e Ss play amp sound instruction manual 41517 Technical specifications Power supply 115 230 V 50 60 Hz Bluetooth profile V 2 0 Clase II A2DP amp AVRCP 1 3 Mechanical format Electrical ballast Consumption max 200 mA 115 V 100 mA 230 V Max power output 6 6 WRMS 12 12 WPEAK max 4 Q min Size cutting 65 mm Consumption stand by 0 3 W INPUT 3 V RMS 7 V Weight
3. Milam leiielp Wala E sound WALL RADIO AIR RADIO 41515 41517 41513 41018 41020 41019 41518 41514 ai WALL RADIO 9 sa Bluetooth HIGH QUALITY SOUND play amp sound en instruction manual Technical specifications Display Multicolor led Sensitivity inputs AUX and TV 500 mVRMS Max power 2 2 WRMS audio Main power input 115 230 V 50 60 Hz Sensitivity input PIN 3 V RMS 7 V Housing g60 mm box Consumption max 7W Input impedance 10 KQ Dimensions mm 45x 45x52 Consumption stand by 0 2 W Loudspeaker impedance min 16 16 Q Wiring diagram Impedance Impedance 4Q 4Q NOTE This example shows the stage 40425 connection but also can be connected with HRR 7 models 03001 E17G D and 40430 If you choose the power stage E17G D it is necessary to use the 45 as negative or ground connection L Left Impedance 16 Q Impedance 169 R Right The configuration with power stages scan be made with speakers in parallel Ee RR or without speakers at the output of the sound unit 40515 Audio coaxial cable TV Rullen eir o b 0 6 SSe PIN input rom audio calls channel 1 C AMSEEB HEA or MILLENNIUM
4. 1x0 75 m Consumption stand by 0 3 W Mechanical format Electrical ballast Quality HQ Size cutting mm 973 FM Band 87 5 108 MHz Size cutting mm 965 Sensitivity 21W 1m 83 dBspL Dimensions mm 90 x 55 Bluetooth profile V 2 0 Clase Il A2DP amp AVRCP 1 3 Weight Kg 0 162 Frequency response 6 dB 150 16000 Hz Max power output 6 6 Wams 12 12 WPEAK max 4 Q min Dimensions mm 170 x 48 x 50 Wiring diagram 115 230 V 90 60 Hz is e E 2 ic ejt 28 Ja EB 6 i TAC a 0 2 6 z lz LI Es mto 42 le e I IE s I i I l OPTIONAL Multiroom service only with more 41517 and minimum one remote control 41514 TO OTHER ROOMS max 15 modules ref 41517 Final assembly DALAL AL ILLIA ALAA IG AML GS g73 mm Let 15 to 50 mm thickness ceiling PLAY amp SOUND series products References Note 41513 Wall radio 2 2 W stereo with FM RDS and mains voltage from 115 to 230 V 50 60 Hz If its necessary to amplify the output power of the 41517 sound unit we recommend using the following power amplifiers 41514 Remote control for the new PLAY amp SOUND ref 41517 41018 and 41019 products 03001 313 Wat 4Q 41515 Bluetooth sound unit with AUX TV and PIN inputs 2 2 W 115 230 V E17G D 20 W mono at 4 Q or 10 10 W stereo at 2 Q 41517 Master sound amplifier 6 6 W wi
5. 2 2 41517 Master sound amplifier 6 6 W with bluetooth FM RDS multiroom and AUX IN signals on ballast format 40425 30 W mono at 8 Q or 15 15 W stereo at 4 Q 41518 Auxiliary module for 41513 Wall Radio with line in Input USB memory player headphones output and bluetooth 40430 100 W mono at 2 Q or 50 50 W stereo at 4 Q or 25425 W stereo at 4 Q at the same time that 50 W at 2 Q for mono subwoofers agi WALL RADIO 3 om Bluetooth HIGH QUALITY SOUND play sound en instruction manual Technical specifications Main power input From 41513 module Audio input impedance 10 KQ Headphones output nominal level 300 mV Consumption max 175 mA Audio input nominal level 2100 mV Housing 60 mm box File formats MP3 WAV Bluetooth profile V 2 0 Clase II A2DP amp AVRCP 1 3 Dimensions mm 45x 45x52 USB maximum output current 100 mA Headphones output impedance 16 32 Q min Wiring diagram L Left Impedance 16 Q Impedance 169 R Right External coaxial antenna OPTIONAL ANT GND L L R R Enter SETTINGS menu to select it aa 1508 ss Soft _008418S1 0 8 Bluetooth Friendly name EGI 41518 0008 PIN 0000 SPK 16Q 2W 115 230 V 15 Imax 143 60 mA INPUT 43 n i 51000831303238 MAC CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN play amp sound l 41518 play amp sound
6. Kg 0 162 FMband 87 5 108 MHz Impedance INPUT 10 KQ Dimensions mm 170 x 48 x 50 Wiring diagram Basic example only with Bluetoothe Multiroom example with remote control 41514 auxiliary input SINGLE HALL OR ROOM ONLY WITH BLUETOOTH MODE SOUND IN FALSE CEILING BLUETOOTH FM RDS MULTIROOM AND AUDIO INPUT MODE FUNCTION IN FALSE CEILING FOR HALL OR ROOM TO OTHER ROOMS me More rooms N max 15 modules ref 41517 230 V 115 V 15 50 60 Hz User bluetooth device smartphones tablets and PC laptops OPTION 1 External FM coaxial antenna Z Distance from bluetooth device from 1 to 30 m depending on the environment 200002002 lt ar OPTION 2 Min 4 Q per channel 6 6 W 230 V 115 V External FM wire antenna 11590 50 60 Hz IZE YF 75 cm max c Epa Sa Va S Distance from bluetooth device S from 1 to 30 m depending on the environment e X e S ol V D S LH CS R i RF distance for remotes control from 1 to 30 m depending on the environment Min 4 Q per channel 6 6 W 5 2 E S User bluetooth device a Ss smartphones tablets and PC laptops 2
7. module for 41513 Wall Radio with line in Input USB memory player headphones output and bluetooth 40430 100 W mono at 2 Q or 50 50 W stereo at 4 Q or 25425 W stereo at 4 Q at the same time that 50 W at 2 Q for mono subwoofers AIR RADIO O o Bluetooth STEREO multiroom play sound en instruction manual 41018 Loudspeaker Technical specifications 41517 Technical specifications Power supply 115 230 V 50 60 Hz INPUT 3V RMS 7 V Max power RMS 7 W Cover angle 4 KHz 100 6 dB Consumption max 200 mA 115 V 100 mA 230 V Impedance INPUT 10KQ Impedance 4Q Parallel speaker cable 1x3m 1x0 75m Consumption stand by 0 3 W Mechanical format Electrical ballast Quality HQ Size cutting mm 995 FM Band 87 5 108 MHz Size cutting mm 65 Sensitivity 1W 1m 86 dBsPL Dimensions mm g112 x 45 Bluetooth profile V 2 0 Clase Il A2DP amp AVRCP 1 3 Weight Kg 0 162 Frequency response 6 dB 90 15000 Hz Max power output 6 6 Wams 12 12 WPEAK max 4 Q min Dimensions mm 170 x 48 x 50 Wiring diagram 115 230 V 90 60 Hz Ts gt rec gI ce 58 10 c EB e fo n g a ue az Es Es 38 el 512 z j amp OPTIONAL Multiroom service only with more 41517 and minimum one remote control 41514 TO OTHER ROOMS lt ore ROOMS max 15 modules ref 41517 Final assembly op MLLE T
8. user can control volume level from the device We suggest leaving the volume of 41517 module at maximum level This way maximum performance can be obtained and the control is more comfortable Volume Link Reset key LINK key has three functions 1 Every short press on LINK key reduces preset volume in 6 dB steps up to 68 dB and then it goes to maximum level again 2 Additionally a short press on LINK key makes the module visible for Zigbee devices so that it can be linked with a 41514 remote control 3 A long press more than 6s produces a RESET of the module preset volume is set to maximum Friendly Name and PIN code return to the value printed on the labels Operation in full functionality mode Bluetooth FM RDS aux input amp multiroom using EGi remote control First connection 41517 master module works in Bluetooth only mode when powered It is necessary to link it to one or more 41514 remote controls to get full functionality FM RDS multiroom aux INPUT clock alarm sleep and equalizer Access to LINK internal key on the back side of 41517 Linkin
9. ING Please don t lose the labels so that the Friendly Name and the PIN code are always available Turning ON The module remains in stand by state until it is connected to a Bluetooth device When connected it goes to ON state audio output is activated volume is adjusted to its preset value and equalizer is set to achieve optimum performance Since then volume control and music selection will be controlled from the linked Bluetooth device NOTE Disconnection causes are manual command from the device or lost of coverage When disconnected module goes to stand by state audio output is disabled and the module is visible connectable again In other words it can be linked to a new Bluetooth device or connected to a known device one that has been linked previously Access to LINK internal key on the back side of 41517 O lt LINK Preset volume adjustment Preset volume is factory set at maximum level However it can be changed and limited by means of LINK key which is located on the back side of 41517 module Every short press on LINK key reduces preset volume in 6 dB steps up to 68 dB and then it goes to maximum level again Once adjusted preset volume is stored and is value is kept even in case of power failure It can be adjusted again or be reset to factory set value maximum by pressing LINK key for 6 seconds or more WARNING Keep in mind that a RESET can modify other parameters NOTE In Bluetooth mode the
10. L LLL LLL EPIL E 295 mm gt 10 mm O PLAY amp SOUND series products References Note 41513 Wall radio 2 2 W stereo with FM RDS and mains voltage from 115 to 230 V 50 60 Hz If its necessary to amplify the output power of the 41517 sound unit we recommend using the following power amplifiers 41514 Remote control for the new PLAY amp SOUND ref 41517 41018 and 41019 products 03001 313 Wat 4Q 41515 Bluetooth sound unit with AUX TV and PIN inputs 2 2 W 115 230 V E17G D 20 W mono at 4 Q or 10 10 W stereo at 2 Q 41517 Master sound amplifier 6 6 W with bluetooth FM RDS multiroom and AUX IN signals on ballast format 40425 30 W mono at 8 O or 15 15 W stereo at 4 Q 41518 Auxiliary module for 41513 Wall Radio with line in Input USB memory player headphones output and bluetooth 40430 100 W mono at 2 Q or 50 50 W stereo at 4 Q or 25425 W stereo at 4 Q at the same time that 50 W at 2 Q for mono subwoofers AIR RADIO ros O w Bluetooth STEREO multiroom play amp sound en instruction manual 2 Loudspeaker Technical specifications 41517 Technical specifications Power supply 115 230 V 50 60 Hz INPUT 3 V RMS 7 V Max power RMS 2W Cover angle 2 4 KHz 150 6 dB Consumption max 200 mA 115 V 100 mA 230 V Impedance INPUT 10 KQ Impedance 16 Q Parallel speaker cable 1x3 m
11. audio output OUT ss eli 41515 1520 N87 160 2 2W Made in Spain Pi Analog TV audio output from jack to C Y neay ehe headphones or SCART connector EE 115 230 V 15 50 60 Hz PLAY amp SOUND series products References Note 41513 Wall radio 2 2 W stereo with FM RDS and mains voltage from 115 to 230 V 50 60 Hz If its necessary to amplify the output power of the 41515 sound unit we recommend using the following power amplifiers 41514 Remote control for the new PLAY amp SOUND ref 41517 41018 and 41019 products 03001 313 Wat 4Q 41515 Bluetooth sound unit with AUX TV and PIN inputs 2 2 W 115 230 V E17G D 20 W mono at 4 Q or 10 10 W stereo at 2 2 41517 Master sound amplifier 6 6 W with bluetooth FM RDS multiroom and AUX IN signals on ballast format 40425 30 W mono at 8 O or 15 15 W stereo at 4 Q 41518 Auxiliary module for 41513 Wall Radio with line in Input USB memory player headphones output and bluetooth 40430 100 W mono at 2 Q or 50 50 W stereo at 4 Q or 25425 W stereo at 4 Q at the same time that 50 W at 2 Q for mono subwoofers play sound en instruction manual 41513 41020 41513 41020 CORP S QDSTEREO Bluetooth USB MP3 HIGH QUALITY SOUND Technical specifications Display LCD graphic FM band Supply voltage 115 230 V 50 60 Hz Speakers impedance Power consumption max 143 mA 115 V 60 mA 230 V Housing Stand
12. by power max 0 2 W 0 6 W with 41518 module Dimensions mm Wiring diagram 87 5 108 0 MHz 16 Q 2 2 W audio power 260 mm box 45 x 45 x 52 Impedance 4Q Impedance 4Q NOTE In this example 40425 power amplifier is used Nevertheless 03001 E17G D and 40430 models can be connected In this configuration speakers or power amplifiers can be used Coaxial external antenna In case E17G D power amplifier is chosen 45 should be used as GND a L Left ee ne Impedance 15 50 60 Hz p 4 a I Impedance 160 R Right OPTIONAL E Enter SETTINGS menu to select it iu SPK 1602 W Fei play amp sound 11572302215 41518 play sound Connect to 41513 only i 41513 fai SR aa 115 230 V y 15 50 60 Hz PLAY amp SOUND series products References Note 41513 Wall radio 2 2 W stereo with FM RDS and mains voltage from 115 to 230 V 50 60 Hz If its necessary to amplify the output power of the 41513 sound unit we recommend using the following power amplifiers 41514 Remote control for the new PLAY amp SOUND ref 41517 41018 and 41019 products 03001 3 3 Wat 4Q 41515 Bluetooth sound unit with AUX TV and PIN inputs 2 2 W 115 230 V E17G D 20 W mono at 4 Q or 10 10 W stereo at
13. een 115 and 230 V 50 60Hz prior to being used Because these devices communicate by radio frequency depending on the environment interference and objects communication can be altered There is not any LED indicator so it is necessary to connect at least one speaker better two in order to check the unit is working properly External audio amplifiers i e E17G D 40425 amp 40430 can be attached to the audio output To do so connect 41517 terminals L R amp 4 GND to the audio amplifier input terminals L R amp GND respectively Operation in Bluetooth mode only without remote control First connection 41517 master module works in Bluetooth mode only when powered for the first time or after a blackout Initial state is stand by the module is visible to any Bluetooth device and can be paired with it Module Friendly Name is EGi 41517 xxxx This name will appear on the Bluetooth device screen when searching EGi is the brand 41517 is the product reference and xxxx stands for the last four digits of the serial number Every module has a unique Friendly Name so the user can know which module is connecting to Friendly Name is printed on two labels one is attached to the enclosure and the other one is left loose into the packaging Pin code linking A 4 digit random password PIN code is printed on the labels It must be keyed in during linking process Once linked and connected the module will start to sound WARN
14. g to a 41514 remote control Master module can be controlled by one or more 41514 remote controls so that several people can control it A 41514 remote control can handle up to five 41517 modules A 41517 module can be handled by up to fifteen 41514 remote controls Communication between 41517 modules and 41514 remote controls is performed by Zigbee It is a radiofrequency communications protocol e To link the devices please press LINK key on the back side of 41517 module so it becomes visible for Zigbee devices Next press the two upper right o keys on the 41514 remote control at the same time LINK TO A NEW RECEIVER It will appear LINKING on the screen When linking process ends it will appear LINKED TO A NEW RECEIVER e There is another way to link together 41514 and 41517 it uses the PIN code printed on the labels of 41517 Press PIN on 41514 Then key in PIN code and press OK It will appear LINKING on the screen When linking process ends it will appear LINKED TO A NEW RECEIVER Once linked to a remote control or more Bluetooth can only be activated from a 41514 remote control In case of power failure the module will go to Bluetooth only mode but it will change automatically to a full functionality mode when any command from a linked 41514 remote control is received For detailed information about full functionality mode FM multiroom input clock alarm sleep and Bluetooth please read the 41514 remote contr
15. ol user manual Troubleshooting Problem Possible solution a Module doesn t work at all Check that the sound unit is powered A voltage between 115 and 230 V 50 60Hz must be applied to L and N terminals e The module can be linked to a Bluetooth device Check that the speakers are properly connected to but there is no sound L L y R R outputs Verify the absence of short circuits and check that the speakers line impedance is above 4 ohms Make sure that a Bluetooth device is connected and set volume level to maximum a f the module is linked to a 41514 remote control When LINK key is pressed in full functionality pressing the LINK key switches off the sound mode 41517 module goes to stand by state to allow a new link to a different remote control That is the reason for the music to switch off After that pressing any key on the 41514 regains control over the module a Module is powered but it is not visible for e Itis probable that the module is being controlled Bluetooth devices and do not responds to a by another 41514 remote control previously linked 41514 remote control Check all remote controls in the installation AIR RADIO lt 3 oz Bluetooth GDSTEREO multiroom play amp sound en instruction manual L alalle E e eeel Power supply 31 5 V AAA bateries Weight Kg 0 122 RF band 2 4 GHz Zigbee RF Dimensions mm 52 x 125 x 19 Display LCD graphic Multiroom link
16. th bluetooth FM RDS multiroom and AUX IN signals on ballast format 40425 30 W mono at 8 O or 15 15 W stereo at 4 Q 41518 Auxiliary module for 41513 Wall Radio with line in Input USB memory player headphones output and bluetooth 40430 100 W mono at 2 Q or 50 50 W stereo at 4 Q or 25425 W stereo at 4 Q at the same time that 50 W at 2 Q for mono subwoofers play sound WALL RADIO AIR RADIO national Avda Almozara 9 50003 Zaragoza ESPANA Tel 976 40 53 53 Fax 976 40 53 54 http www egiaudio com e mail info egiaudio com export Av Almozara 79 50003 Saragossa SPAIN Tel 34 976 40 53 56 Fax 34 976 40 53 54 http www egiaudio com e mail export egiaudio com Electroacustica General lb rica S A A AO fs x X ms CE 10 2015 008532
17. up limits MAXIMUM MULTIROOM LINK UP OF 41517 MASTER MODULES THROUGH ONE 41514 REMOTE CONTROL 41514 Remote control JA D SJN 5 ef CUMS di L N E 9 41517 41517 Master module with Zigbee RF link up 900 Essa ane Sar 41514 15 remote controls maximum PLAY amp SOUND series products References Note 41513 Wall radio 2 2 W stereo with FM RDS and mains voltage from 115 to 230 V 50 60 Hz If its necessary to amplify the output power of the 41517 sound unit we recommend using the following power amplifiers 41514 Remote control for the new PLAY amp SOUND ref 41517 41018 and 41019 products 03001 313 Wat 4Q 41515 Bluetooth sound unit with AUX TV and PIN inputs 2 2 W 115 230 V E17G D 20 W mono at 4 Q or 10 10 W stereo at 2 Q 41517 Master sound amplifier 6 6 W with bluetooth FM RDS multiroom and AUX IN signals on ballast format 40425 30 W mono at 8 O or 15 15 W stereo at 4 Q 41518 Auxiliary
Download Pdf Manuals
Related Search