E-2 - Bradd.us
Contents
1. o o o CL LEVEL ouT CAB SIM DC 9V 12V OUT DRIVE PREAMP OUT Q oe Q 3 2 9 N AMT E2 Legend Amps two channel guitar preamp Safety instructions WARNING Inside the device there are no parts that are user serviceable Repairs to the machine may only be performed by qualified personnel WARNING To avoid failure the device should not be exposed to rain or moisture inside the device must not be exposed to water or other liquid Do not place near filled with liquids such as vases etc Please read the instruction manual carefully Keep the manual Heed all warnings Follow all instructions To clean the unit use a dry cloth first unplug the appliance and unplug it from the power adapter Do not install near any heat sources or expose to direct sunlight 6 Place the power cord so that it can not be stepped on and avoid its contact with sharp corners etc In that case if the plug or socket adapter is used to disconnect the unit from the network they must be easily accessible 7 Only use attachments and accessories recommended by manufacturer 8 Unplug the AC adapter when using the AC adapter during a thunderstorm 9 When not in use for a long time remove the battery from the device case 10 All work associated with the repair of the device must be performed by qualified service personnel 11 WARNING These service instructions are for use2. by qualified personnel Do not carry out any repair work not described in the instruction manual Repairs must be performed by qualified eh pi personnel IMPORTANT NOTICE Violation following instructions can cause damage to your DEVICE DAMAGE ARISING will void your warranty gt When transporting or storing the product in the freezing temperatures before turning on leave the device at room temperature in its original packaging within 2 hours no less gt To connect the preamp to other devices use only the cables intended for such connections gt Do not use other cables such as acoustic etc Before you start To ensure the safe transportation of the device was carefully packed at the factory However if the box is damaged inspect the unit immediately for signs of damage gt If you see damage do not sent directly to the address of the manufacturer but notify your dealer and the shipping company otherwise you will lose the right to compensation www amitelectronics com 1 ANIT esecsronce 1i VI l Electronics Only use attachments and accessories recommended by manufacturer Arrangement of contacts in a low voltage socket of the adapter PacnonoXKeHne KOHTAKTOB Ha HUSKOBONMbTHOM pa3sbeme ceTesoro agantTepa DC _ e Connecting the preamp to the power adapter gt The connection is made only after all the audio connections gt Before connecting the preamp to the power adapter make sure
3. ckage includes following products 1 Guitar preamp 1pc 2 Users manual 1pc 3 Cardboard box 1pc 4 Warranty Card 1pc Introduction In E2 preamp reproduced the main features of Engl Engl amps has become a particular feature of a modern sound Convex and at the same time German rigorous form four wicked its fullest stage preamp General characteristics Two channel preamps effects series LA 2 are designed to produce a clean and overdriven guitar sound with various schemes organization guitar tract The basic concept of the series your sound in your pocket In a series of LA 2 used the original schematics developed by specialists of AMT and you always get a low voltage 9V power supply and a low current consumption of the bright and rich sound in the style of the original tube overdrive A distinctive feature of the 2 series is three exits for the implementation of the basic organization schemes channels Connect directly to the power amplifier loaded on guitar speaker www amtelectronics com 1 e Connection to the clean channel guitar combo amp or guitar Connect directly to a mixing console All three outputs can be used simultaneously fully carrying out its functions and without exerting any influence on each other When connected to power amp and mixer LA 2 is a switchable two channel preamp between clean and overdrive channels using footswitch CLEAN channel universal for all models in the series an
4. d has the character of the sound in the style of classic Fender amps When operating the LA 2 in the effect of using clean channel external amplifier or combo you must consider that the resulting sound is largely determined or used combo amp While the effect of the series using the gentle active bypass which reduces the need to minimize the length of the cords as much as possible while maintaining the original sound of the instrument while effect switched off CONTROL PANEL Preamps series LA 2 are easy to handle and have a small number of controls Channels is determined by the sensitivity of the position controller OD GAIN for the drive channel and click Clean Mid Boost for the clean channel Different models have different series of drive overall sensitivity of the channel corresponding to the sensitivity of the emulated overdrive Regulators TREBLE MIDDLE BASS are adjustable upper middle and lower frequencies of Drive channel When operating as an effect control OD GAIN switch and Clean Mid Boost do not effect on the sound passing through the bypass The output level is determined by the positionregulators OD LEVEL for the drive channel and control CL LEVEL for the clean channel which is in the position for 13 hours a standard level of 10dB Output level at maximum control position reaches 8 dB so use this position only if you want to overload the input circuit of your combo or additional output amplifier overload Atte
5. ntion Pre amplifier AMT Legend Amps as well as any high end devices demands for power supply We strongly recommend the use power supply for this series or battery voltage 6F22 Krone 9V or an adapter that meets the requirements for the quality recommended AC DC Adapter SAOSDC 9V 1 11 A or AC DC Adapter SA12DC 12V 1 25 A Technical characteristics INPUT Impedance 1 0MOhm Nominal sensitivity 20dB OUTPUT Output Impedance 10kOhm The output level 10dB OUTPUT CAB SIM Output Impedance 10kOhm The output level 10dB Power Battery 6F22 Voltage DC 9V Current consumption Approx 6mA Power adapter option Recommended Voltage Dimensions Weight Dimension NETTO Weight NETTO without battery Dimension GROSS Weight GROSS without battery AC DC Adapter SAO9DC 9V 1 11A AC DC Adapter SA12DC 12V 1 25A DC 9V nnn DC 12V 111x58x73mm 0 23kg Approx 125x83x103mm Approx 0 33kg www amtelectronics com 2 ANIT scons VI l Electronics www amtelectronics com 2
6. that the case connection cable and plug the AC adapter are not damaged no cuts cracks dents etc and are in good condition gt To connect the preamp to the AC adapter insert the low voltage connector adapter into the jack on the right panel of the preamp and then plug the adapter into the wall outlet Disconnecting the preamp from the power adapter gt To disconnect the preamp from the AC adapter disconnect the AC adapter from the power outlet and then disconnect the low voltage connector from the socket on the right hand panel of the preamp gt To prevent damage during storage and transport use the original packaging gt Do not let children play with the packaging gt Please dispose of all packaging materials in an environmentally friendly way gt To avoid overheating of the device is provided with sufficient ventilation do not cover it and do not place near heating radiators etc gt Operation near powerful radio transmitters and high frequency sources can lead to a marked deterioration in sound quality In this case increase the distance between the sensor and the transmitter and use shielded cables for all connections WARNING Please note that high volume can damage your hearing and or damage to the dynamic head of your speaker system Before switching on the unit turn knobs Volume to the left counter clockwise Always make sure that volume is moderated What s in the package The pa
Download Pdf Manuals
Related Search