NEW ELEGANCE
Contents
1. Control 2Gr 510 mm 710 mm 600 mm 124 mm Display control 2Gr 510 mm 710 mm 600 mm 124 mm 77 DIMENSION SKETCH iN Elegance Pulser 2Gr with grinder 670 mm 710 mm 600 mm 124 mm Control 2Gr with grinder 670 mm 710 mm 600 mm 124 mm Display control 2Gr with grinder 670 mm 710 mm 600 mm 124 mm Control 3 4Gr 670 mm 990 mm 600 mm 124 mm Display control 3 4Gr 670 mm 990 mm 600 mm 124 mm TRANSPORT New Elegance The machine is shipped in a custom designed carton which utilizes model specific polystyrene cushions to protect it from damage The machine s carton features standardized handling symbols to explain proper shipping and storage methods The machine must remain in a horizontal position during the transport Do not store or handle the machine except on its feet During transport protect the carton and machine from impact drops crushing shocks moisture and exposure to extreme temperature Upon receipt and delivery ensure that the machine is in the exact condition described in the enclosed documentation and that all accessories are included Missing items should be reported to the manufacturer or dealer immedi2. Ensure that the drainage tube is not twisted and that it is below the level of the drain cup Boiler pressure is directly controlled by water temperature fig 01 This machine is fitted with a pressure gauge that displays the boiler pressure if the machine is equipped with a digital display it will also indicate water temperature C Relationship between boiler pressure and temperature 125 120 115 110 BAR 0 7 0 8 0 9 l L I 1 2 CI Standard operating pressure and temperature Open the machine s water supply valve Turn on the main power switch a Press a drink button at the control panel on each T group wait until water comes out continuously from each of them This ensures that the heat exchangers in the machine are being correctly filled Open the steam lever to release the air trapped in the boiler m The red lamp indicates that the boiler is heating The lamp switches off automatically when the machine reaches operating temperature Main power switch The machine is now ready to use EXPORAR 21 li INSTALLATION Il The portarilter sets Filter basket locking spring Filter basket Porta filter spring slot Porta filter and filter basket for single espresso 7g Porta filter Porta filter amp filter basket for double espresso 14g Align the porta filter s two flanges with Insert the porta filt
3. 2Ph 230Vac 3Ph 230Vac 3Ph 230Vac INSTALLATION Water connection 00 Connecting the machine to the domestic water supply must be performed by a qualified person Purge at least 20 liters of water from the domestic water supply before connecting the machine to it to flush out any debris that may be in the plumbing sytem that would otherwise accumulate inside the boilers The domestic plumbing system should be fitted with a brass 3 8 NPT male pipe fitting and an in line shut off valve Connect the 180cm water inlet hose included with the machine to the domestic water supply and tighten the line fittings with a wrench to 15 ft Ibs 20N m Only use safe drinking water with a hardness rating between 5 fH and 8 fH French hardness degrees or 20 to 32 ppm parts per million as calcium If the hardness value is below this limit corrosion of hydraulic components is likely If the value is higher lime scaling inside the boiler will occur In both cases the proper function of the machine and quality and taste of the coffee will be negatively affected If necessary connect the machine to a water softener to reduce water hardness using the flexible 55cm hose included in the accessory box Connect one end of the corrugated drain tube to the drain cup in the machine connect the other end to the plumbing drainage system in the installation area A Important Only use the hoses supplied with the machine Never reuse damaged hoses
4. a If boiler filling time exceeds the programmed time 2 minutes all of the Drink buttons lights will flash and the machine will be disabled To re enable it turn the machine off and on again at the power switch m If the electronic control panel does not receive a pulse from the flow meter coffee too fine or flow meter fault within 5 seconds of pressing one of the espresso buttons the light for the dose selected will start to flash To disable it press the dose button again Asan additional safety all dose settings have a maximum dispensing time of 5 minutes TROUBLESHOOTING New Elegance The following checks can be carried out by users once the machine has been turned off and disconnected from the power supply For all other non specified machine faults disconnect the machine from the power supply and immediately contact authorised and qualified service personnel The plug is not correctly inserted into the power socket Check that the plug is correctly inserted and that the power socket is operational The machine does not start up The circuit breaker and or differential are disconnected Check that they are connected The cable and or plug are damaged Call service personnel to replace them The steam wand does not dispense steam The steam wand is clogged by milk Clean the wand and if necessary remove the nozzle and unclog it using a pin or needle Water is found underneath the ma
5. 60 Hz 2770W Machine model Take Away EAED C32B 22AB 220 240V IN ia 50 60 Hz 2770W Steam wand l unit Hot water outlet I unit Temperature control Regulated bv pressure switch Temperature control bv group No Programmed via displav No Dispensing svstem for tall cups Optional Energy saving mode No Height width depth mm 520 470 610 630 470 610 Boiler volume L 6 220 240V IN 220 240V IN Power supply see machine model info 50 60 Hz 2770W 50 60Hz 3125W Power supply optional 110V IN Water connection Female 3 8 thread Machine weight kg 35 45 47 00 40 45 Steam boiler operating pressure Between 0 8 and 1 2 bar TECHNICAL SPECIFICATIONS New Elegance Control 2GR Machine model Standard EBED C32B 12AB 220 240V IN 50 60 Hz 2650W EBFE D13B 12AB 380 415V 2N 50 60 Hz 3350W EBEE D32B I2AB 220 240V IN 50 60 Hz 3350W New Elegance Machine model Take Away EBED C32B 22AB 220 240V IN 50 60 Hz 2650W EBEE DI2B 22AB 220 240V IN 50 60 Hz 3350W EBEE D41B 22AB 220 240V IN 50 60 Hz 3350W Steam wand I units Hot water outlet l unit Temperature control PID regulation Yes Temperature control by group Programmed via display No Dispensing system for tall cups Optional Energy saving mode Yes Height width depth mm 52
6. AD EXPOBAR S A Take special care to avoid scalding when 60666 L Hece LI performing this cleaning operation as the hot water used to clean the gasket will spill over the sides of the porta filter A WARNINGI Do not fully tighten the porta filter If fully tightened high pressure water may spray out and cause scalding or serious injury Cleaning the shower plate Remove the porta filter from the group head Clean the shower plate and group gasket with a soft brush to remove any coffee A N Remove coffee residue with a food safe brush res Shower plate CLEANING AND MAINTENANCE et I O SARA EXPOBAR i tnt X O E ZL Important a Always remove and insert the porta filters Do not place wet cups directly on the gently Never use excessive force to try to cup shelf Allowing water to drip into the close the porta filter If the porta filter does machine can cause mechanical and electrical not turn and lock into place without excessive damage force this usually indicates that there is too much coffee in the filter basket STORAGE AND DISPOSAL Before storage be sure to Perform all weekly and periodic cleaning procedures described in this manual see pages 16 20 Disconnect an
7. change the auto on off time increase decrease the values hours using the short espresso and Long Espresso buttons whilst the values are flashing When the desired value is reached press the 2 Short Espressos button 2S to accept it Set the values for the minutes in the same way and amp Note gt By default this setting is set as On indicating that the function is disabled Changing the value to anything other than enables the function To leave this function disabled press the 2 Short Espressos button whilst the value selected is hits ORO LI Vllax an ue time is flashing serene the NI ressing the short espresso an ong Espresso uttons Off hh mm B L L ee When the desired value is fig 10 Reached press the 2 Short Espressos button EB to accept it creion The minutes values will start flashing Set these values in the same way as Day described above 6 and amp After accepting the time the next menu will be displayed fig I If auto on off is enabled it will also be possible to set a day on which the machine will not be turned on automatically This option will not be displayed if auto on off is disabled To set the day off see fig Increase decrease the values by pressing the short espresso and Long Espresso buttons When the desired value is reached press the 2 Short Espressos button 2S to accept it Note D By default this setting is se
8. during operation to avoid scalding or serious burns CLEANING AND MAINTENANCE A Important a To keep the machine looking and working like new you should always follow the cleaning and care instructions provided in this manual a Always turn off the main power switch when cleaning the exterior of the machine a All external surfaces should be cleaned with a damp lint free cloth that will not scratch the machine Do not use aggressive cleaning detergents solvents or degreasers These can damage the surfaces and plastic and rubber parts and leave unwanted residue A Important Each day or 8 hours after dispensing the last coffee the following cleaning tasks should be performed to maintain the quality and performance of the water system Porta filter Brew one espresso with the filter empty around one minute to flush it out dispose of this water Steam Wand Position the wand over the drip tray and open the steam lever for one minute to flush the wand Hot Water Outlet Place a container under the water outlet and open the lever for 20 seconds dispose of this water Rinse each of the brewing groups shower plates and porta filters with hot water for 15 seconds Clean the external surfaces of the machine with a damp cloth paying special attention to the stainless steel parts Clean the steam wand and the water tap Be sure that the nozzles are not clogged or partially blocked with milk or other residue If it s
9. machines without display control Note In machines equipped with a display electronic pre infusion may have to be enabled disabled from the service programming menu PROGRAMMING Il Programming the coffee dosage 111 Use the following steps to program the espresso brew dosages for each Brewing Group and Drink Button each button can be programmed for a different dosing time if desired I Place a Porta filter filled with fresh espresso grounds in the Brewing Group 2 On machines not equipped with a displav press the Continuous Dispensing button SS for 4 seconds On machines equipped with a display hold down the Continuous Dispensing button for 8 seconds The Continuous Dispensing button light will flash On machines equipped with a display all of the Drink buttons lights will be turned on 3 Within 30 seconds press the Drink Button to be reprogrammed All of the button lights will turn off except for the Continuous button and the one being programmed Water will begin to flow and espresso will begin dispensing 4 Allow the beverage to dispense until the desired drink volume is reached then press the Drink Button that is being programmed to stop the water flow This dosage time will now be stored as the default for that Drink Button 5 Repeat Steps l 4 for all Drink Buttons to be reprogrammed If you only need to reprogram one of the dispensing options follow the steps above and program just that buttonn All of the other dispe
10. 0 470 610 520 710 610 670 710 600 Boiler volume I 6 11 5 Power supply see machine model info see machine model info see machine model info 220 240V IN 50 60 Hz 3600 W Power supply optional LIOV IN 380V 3N 4500 W 50 60 Hz Water connection Female 3 8 thread Machine weight kg 55 50 55 50 Steam boiler operating pressure Between 0 8 and 1 2 bar Ambient noise lt 70 db MINI 2GR l unit l unit l unit 2GR fs l unit l unit l unit TECHNICAL SPECIFICATIONS New Elegance Display Control EBEE D41B 12AB Machine model Standard 220 240V IN 50 60 Hz 3200W EBEE D41B 22AB Machine model Take Away 220 240V IN 50 60 Hz 3200W Steam wand 2 units Hot water outlet l unit Temperature control PID regulation Temperature control bv group Yes Programmed via display Yes Dispensing system for tall cups Optional Energy saving mode Yes Height width depth mm 520 710 610 510 990 600 Boiler volume I 17 5 17 5 see machine 380V 2F N 4000 W Power supply faedal inta 50 60 Hz 380V 3F N 6000 W i V 3N 4500 W 50 60 H Power supply optional 380V 3 500 W 5 z RE Water connection Female 3 8 thread Machine weight kg 73 45 81 40 Steam boiler operating pressure Between 0 8 and 2 bar Ambient noise lt
11. 70 db OVERVIEW OF COMPONENTS Front view of the machine Steam tap Drink buttons Hot water tap Brewing group Hot water outlet Steam wand Porta filter Boiler pressure gauge Heater element lamp OVERVIEW OF COMPONENTS Front view of the machine Switch of right brewer Steam tap Hot water tap Hot water Boiler pressure gauge Brewing group Porta filter outlet Steam wand Heater element lamp OVERVIEW OF COMPONENTS Front view of the machine New Elegance Grinder Drink Hot water Steam tap buttons tap YN i EXPOBAR ON OFF Brewing group Hot water switch outlet Steam wand Porta filter Boiler pressure gauge OVERVIEW OF COMPONENTS Front view of the machine Drink buttons Drink buttons for left brewer for right brewer Hot water Switch of Steam tap tap left brewer T Switch of Steam tap right brewer Boiler pressure gauge a AIKE EX POBAR Steam wand Hot water Brewing group outlet Porta filter Heater element lamp Steam wand Power switch OVERVIEW OF C
12. NEW ELEGANCE USER MANUAL UM_EN Date 150106 Original instruction CONTENT RST NEED ec ai fet Pa te 2 SYMBOL DESCRIPTION Notification intensity levels GENERAL Introduction General instructions Warnings Precautions Intended use TECHNICAL SPECIFICATIONS New Elegance IGR Accesories New Elegance Control 2GR Accesories New Elegance Display Control PACCESOMIES issssccccisssiscsssassecssctestassesiosteascsstssaciseloosb E RE EEE E E E 9 OVERVIEW OF COMPONENTS New Elegance MINI Control IGR New Elegance MINI Pulser 2GR New Elegance MINI Control IGR with Grinder New Elegance Control 2GR New Elegance Control 2GR with Grinder New Elegance Comerolll 3GR iss an se ea e A deanna peta tienen aeons DIMENSION SKETCH New Elegance MINI IGR New Elegance MINI 2GR New Elegance MINI IGR with Grinder New Elegance Control GR suaren naaa arara ar a aeS TN Rn New Elegance 2GR with Grinder New Elegance 3GR a TRAN OE AORAR 19 INSTALLATI N ricopre oa EEEE EEEN EEEE 19 Packaging Delivery inspection Positioning Electrical installation Connection types Water COMNECKION isasssssscsinzcnsisenssescssasaoseassbessecsssesastonsscntdesesadsesinscnaaueisabecedsol sabbesusei sbicssssodanssdaasuidbcsesdevsasceslanossandelausbecastionts 2 CONTENT Pressurerand temperatu o issir G 21 Starting the machine The porta filter sets Insertir the por
13. OMPONENTS Front view of the machine ON OFF Grinder switch Steam tap Boiler Drink Hot water pressure buttons tap gauge kd j RS ES pan VIA POBANR ese Fes Brewing Steam wand group Hot water outlet Porta filter Power switch OVERVIEW OF COMPONENTS Front view of the machine Boiler pressure gauge Drink buttons Steam tap i Steam tap Hot water tap ON OFF switch S o Z0 TO m o e le EXPOBAR Power switch Hot water outlet Heater kd element Steam wand Porta filter Brewing group lamp 5i DIMENSION SKETCH MINI control IGR 510 mm 500 mm 600 mm 74mm MINI pulser IGR 510 mm 500 mm 600 mm 74mm MINI control 2GR 510 mm 500 mm 600 mm 74 mm MINI pulser 2GR 510 mm 500 mm 600 mm 74 mm f 16 DIMENSION SKETCH MINI control IGR with grinder MINI pulser IGR with grinder 690 mm 500 mm 600 mm 74 mm
14. R SERVICE Please contact your dealer Your dealer Crem INTERNATIONAL www creminternational com Address of CREM international Shanghai Building 5 No 521 551 KangYi Road Pudong New Area Shanghai China Address of CREM international Spain C Comer n 4 Pol Ind Alcodar Gandia Valencia Spain MADE IN SPAIN
15. THE DISPLAY Machines equipped with a display include the following additional functions Automatic daily on off timer stand by function Clock settings current time and date Promotional display Number of coffees infusions dispensed Digital boiler temperature display and control PID technology boiler temperature control Programming and settings help system Visual water softener regeneration alarm Display language selector TEA if it is activated OK c CONTINUOUS BREWING ON STANDBY PROGRAMMING MENU XXXOC hh mm The coffee machine has 3 possible statuses SELECT DOSES s On fig 04 The machine is operational and ready to make coffee This is the usual machine status after turning on the power switch see fig 04 OFF hh mm Stand by The power switch is on but the display shows OFF see fig 05 fig 05 This means that the machine is in energy saving mode This mode is only entered whilst the machine is on To enter this mode press the Continuous dispensing button A and without releasing it simultaneously press the 2 Short Espressos button amp To exit this mode and turn the machine back on press the 2 Short Espressos button 2 again Off The coffee machine is turned off at the power switch PROGRAMMING USING THE DISPLAY Doses setting Select within 30s fig 06 Set clock fig 07 With the machine on press the Continuous Dispensing button E on
16. ately Damage caused during transport should be reported to the shipping agent and the machine s distributor immediately Packaging materials are potentially dangerous and should be kept away from children The carton and all packing materials are recyclable and should be returned to a recycling center for disposal INSTALLATION MIN 10 cm Install the machine on a level sturdy and water resistant surface approximately lOcm above floor level for ease of access and usage Adjust the feet to ensure that it dispenses coffee evenly to all cups Ensure enough free space is available above gt 30cm and behind P 10cm the machine to ensure easy cleaning and maintenance and adequate ventilation Do not install the machine if it is wet or damp Allow it to dry completely and ask a service technician to ensure that none of the electrical components have been affected Note Q Leave an air gap of approximatelv 30cm above the machine and 10Ocm behind it to ensure adequate ventilation INSTALLATION Electrical installation The machine should only be connected to the power supply by qualified personnel The following safety instructions should be obeyed at all times Ensure that the electrical requirements stated on the TECHNICAL SPECIFICATIONS pages 7 8 match the specifications of the power supply at the outlet Ensure that the domestic electrical supply where the machine is being installed is rated fo
17. chine The drainage tube is blocked Clean the drainage tube Coffee not dispensed at right temperature Heat exchanger outlet pipes clogged by limescale Brewing groups do not dispense water Water system is clogged by limescale 90 of faults are due to limescaling inside the coffee machine due to not softening the water To avoid these faults maintain the water softener regularly Coffee dispensing is very fast The coffee grinding is too coarse Adjust the coffee grinding setting Coffee dispensing is very slow The coffee grinding is too fine Adjust the coffee grinding setting 36 For the warranty to be valid the conditions for maintenance must have been followed according to our instructions proper precautions have been taken and warranty claim has been issued without delay The affected equipment shall not be used while awaiting service if there is any risk that the damage or defect could worsen The warranty shall not cover consumable supplies such as glassware or normal maintenance such as cleaning of filters Additionally damages of an external nature such as contaminants in the water limescaling incorrect voltage or power surges and water supply issues such as pressure changes or service disconnection are not covered by this warranty The warranty will not cover damages or defects caused by incorrect handling or operation of the appliance FO
18. d roll up the power cord this should be performed by a qualified person Disconnect the machine s water inlet hose from the domestic water supply and drain the boilers this should be performed by a qualified person Clean the drip tray and exterior of the machine to remove any coffee or other residue Cover re pack the machine in its original carton and store it in a dry place where it will not be exposed to extreme temperatures or humidity When returning the machine to service after long term storage perform all weekly and periodic cleaning procedures before use Disconnect and roll up the power cord this should be performed by a qualified person Disconnect the machine s water inlet hose from the domestic water supply and drain the boilers this should be performed by a qualified person m Pack up and ship deliver the machine to a certified recycling center Ss 29 1 PROGRAMMING Il Buttons functions 1 Here is some of the additional functions that the electronics offers Volume control of four different espresso drinks per brewing group Time controlled hot water dispensing if available Automatic filling and level control of the boiler Automatic switch off of the heating element if not enough water System supervision through alarms RS 232 serial interface with reader for connecting control panel and computer Automatic cleaning of the brew groups The control panel is by default progra
19. dren shall not play with the appliance Cleaning and user maintenance shall not be made by children without supervision Do not use the machine if the power cable or plug is damaged or the machine has been dropped Contact a service technician for repairs or to ensure that it is safe for use Do not blockthe vents with rags or other objects Do not insert foreign objects into the vents Check the drain regularly to make sure that waste water is empting properly The coffee machine has been designed and manufactured to make espresso coffee and other hot drinks e g steaming and frothing milk Do not use it for any other purpose The machine is intended to be used by trained personnel for preparing foodstuffs This machine is not intended for use in industrial kitchens domestic kitchens or similar locations The manufacturer will not be held liable for damage to persons or property due to incorrect improper or negligent use by non professional personnel To ensure optimal performance install the machine in a location where these parameters will not be exceeded Maximum permissible inlet water pressure 600 KPa 6 Bar Minimum permissible inlet water pressure 200 KPa 2 Bar Maximum inlet water temperature 40 C Ambient temperature is between 10 C min and 40 C max TECHNICAL SPECIFICATIONS New Elegance IGR New Elegance Machine model Standard EAED C32B 12AB 220 240V IN 50
20. e installed on a water resistant work surface that is capable of adequately supporting the machine s weight Place the machine in a location accessible only to personnel trained to operate it Keep all hazardous packaging materials such as plastic bags styrofoam and staples out of reach of children Plug the machine into a properly installed earth grounded electrical outlet with line voltage that matches the specifications for the machine Ensure that the power supply voltage does not fluctuate by more than 6 Position the power cable so that users cannot trip over it Keep the power cable away from sharp edges and heat sources Children should never be allowed to play with the machine This appliance is not suitable for installation in an area where a pressure washer may be used Do not use the machine outdoors where it would be exposed to severe weather or extreme temperatures If the power cable is damaged it may only be replaced by the manufacturer or its aproved service technician Do not remove or disable any of the mechanical electrical or thermal protection safety equipment sl GENERAL In case of emergency e g the machine catches fire or becomes unusually hot or noisy disconnect the power immediately and turn off the water supply If the machine is not going to be used for an exended period of time disconnect the power When disconnecting the power pull the plug rather than the cable When pac
21. er and rotate it counterclockwise the two slots in the group housing until the handle is apporximately perpendicular to the face of the coffee machine Correct position 5 degrees Porta filter not fully inserted Group gasket is worn out please replace OPERATION A Important Always keep the porta filter inserted in the group to keep it warm This is important to maintain an optimal temperature when the espresso is dispensing A Unlock and remove the porta filter A Fill the filter basket with from the group head espresso grind coffee amount will differ depending on filter basket size For best results use only freshly ground espresso beans A Press the coffee with the A Insert the filled porta filter into Place the cup s under the coffee tamper the group head and lock it into the porta filter outlet s correct position A WARNING Never try to open the porta filter while the machine is in operation The pressurised hot water could cause scalding or serious injury After dispensing has finished wait at least 3 seconds before removing the porta filter A Select the desired option from the drink buttons OPERATION A Place the steam wand over the drip tray and A Immerse the steam wand and termperature open the steam lever for a few seconds to sensor into the milk pitcher
22. ked for storage store the machine in a dry place with an ambient temperature above 5 C Boxes may be stacked up to three New Elegance units high of the same model Do not place other heavy items on top of the box If the machine is likely to be exposed to temperatures below 0 C during handling and transport make sure that service personnel empty the boiler and water system The machine s boiler and water system is empty when delivered from the factory To ensure fault free machine operation only use manufacturer approved replacement parts and accessories Before performing maintenance and or moving the machine disconnect the machine from the power supply and wait for it to cool down Do not place any liquids on the machine This appliance must not be cleaned with a pressure washer Never immerse the machine plug or power cable in water as there is a risk of electric shock Do not touch the machine s hot surfaces or dispensing equipment Do not touch the machine if your hands or feet are wet Do not operate the machine if any part except the dispensing equipment is wet Place the machine out of reach of children This appliance can be used by children from age 8 and above and prsons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Chil
23. making sure the allow condensed water to be ejected Close the wand tip is submerged steam lever when only steam comes out A Press the button again to begin steaming or frothing the milk A Once the milk reaches the Do not remove the milk pitcher while steaming programmed temperature the steaming will stop automatically A WARNING and the pitcher can be removed Do not allow the steam wand to extend out of the milk when the milk is being steamed or frothed it may cause serious burns and injuries After the process is finished position the steam wand over the drip tray and press the steam button once allowing steam to flow for a few seconds to eject any milk remaining in the wand Press the button agian to stop the steam and then wipe down the outside of the steam wand with a damp cloth to prevent nozzle blockage and to keep it clean Leaving milk in or on the wand will affect the taste of later drinks OPERATION Hot water dispensing 100000 i L pee tll EXPOBAR G E Jppbe VAN ka ii EXPORAD ki A Place a jug or similar under the hot water outlet Open the hot water tap Once the machine has dispensed the desired amount of water close the hot water tap WARNING Never expose hands and fingers directly under the hot water outlet
24. mmed with 4 standard drinks these can be reprogrammed as you wish and a continuous selection The first four keys l short espresso Long Espresso 2 short espresso 2 Long Espresso brew the programmed volume and then stop automatically the fifth key brews continuously until user stops it by pressing button again TEA if it is activated e e Gs CONTINUOUS BREWING IShort ILong 2 Short espresso 2Long PROGRAMMING MENU espresso espresso Auto cleaning espresso The Continuous Dispensing button performs 3 different functions depending on length of time pressed Machines equipped with displav Under second Enables automatic water or steam dosing only on machines without manual taps m Between and 8 seconds Enables Continuous Dispensing press again to disable Over 8 seconds Access coffee dose programming menu see below Machines not equipped with display m Under 4 seconds Enables Continuous Dispensing press again to disable Over 4 seconds Access coffee dose programming menu see below To activate these functions turn off the machine at the power switch then while holding down the required button on the left hand Drink buttons turn the machine back on LI I Short Espresso Enable electronic pre infusion LI Long Espresso Disable electronic pre infusion LI 9 2 Short Espressos Perform auto cleaning n 68 2 Long Espressos Turn on off flashing of button lights only for 2GR and 3GR
25. necessary to remove them for cleaning be careful not to deform or damage any of the components during removal Clean the dip tray and the stainless steel insert grid under running water with a brush m Clean the drain cup by slowly pouring one liter of warm water into it to dissolve and remove the coffee residue that accumulates inside the drain cup and hose m Clean the brewing group and porta filter with professional cleaning powder page 21 CLEANING AND MAINTENANCE Unlock and remove the porta filter from the group head a Place the blind gasket in the filter basket Fill the blind basket with cleaning powder for espresso coffee machines Lock the porta filter into the group head Activate the auto cleaning program When the machine is in idle mode simultaneously press the Continuous Q and l Short Espresso buttons After cleaning starts release the buttons and the machine will automatically repeat the cleaning cycle 5 times until cleaning is completed A WARNINGI Never try to open the porta filter while the machine is in operation The pressurised hot water could cause scalding or serious injury After cleaning has finished wait about 3 seconds before removing the porta filter A Important When the cleaning process is finished remove the porta filter and run water through the group again to rinse out any residue Repeat the cleaning process this time without cleaning powder to remove any remaining residue Store
26. nsing options will remain unchanged default settings A Important Use a porta filter filled with fresh espresso grounds for every new brewing dosage that is programmed gt Note Programming any of the options on the left side bank of Drink Buttons when viewing the machine from the front automatically programs the dosages on all of the other corresponding Drink Buttons for the other Brewing Group s Always program the left side buttons first then program the other Drink Buttons to the right afterward to store their specific dosages lt gt Note For safety and water conservation all brewing settings have a maximum dispensing time of 5 minutes Press the Continuous button LQ for 8 seconds all the lights in the keypad will light up and Continuous button will flash the display will read Doses Programming Select 30s Immerse the steam wand in the milk to be steamed or frothed m Press the Steam button The programmed temperature will appear on the digital display When the liquid reaches the desired temperature press the Steam button again to stop steaming The new temperature is now stored Note The electronic temperature probe is designed to automatically stop the steam when the programmed temperature is reached Steaming times with the Turbo Steamer will vary depending on the volume and temperature of the liquid being steamed or frothed but final temperature will be the same 31 F PROGRAMMING USING
27. r and able to provide the power required by the machine Insufficient power supply wiring grounding or insulation can result in overheating and possibility of fire The coffee machine must be connected to an earth grounded electrical outet that complies with the regulations in force in the country of installation Ensure that a circuit breaker engineered for the power consumption of the machine is installed to protect the domestic electrical supply as specified on the ratings plate located under the drip tray Do not connect the machine to the domestic power supply via extension cords plug adapters or shared outlets The manufacturer will not be held liable for damage to persons animals or property resulting from incorrect installation of the coffee machine A DANGER If the power cable or plug is damaged it must be replaced by the manufacturer distributor or its approved service technician in order to avoid RISK OF SERIOUS INJURY OR DEATH Connect the machine according to the specification on the ratings plate located under the drip tray Machine 230Vac Ph N Supply Machine 230Vac Ph N Supply Machine 125Vac Ph N Supply 230Vac Ph N 2Ph 230Vac 125Vac PhEN Blue 6 NEUTRAL PHASE Blue O NEUTRAL Supply cable Machine 2Ph N Suppl Machine 2Ph N Supply Machine 380Vac 3Ph Suppl pply PPI 230Vac PhtN 2Ph 380VactN 3Ph 380VactN Supply cable Machine 2Ph N Supply Machine 2Ph N Supply Machine 230Vac 3Ph Supply
28. t as On indicating that the function is disabled Changing the value to anything other than enables the function To leave this function disabled press the 2 Short Espressos button amp whilst the value selected is To access the counters menu go to the start of the second menu level Counters see fig 07 Briefly press the Continuous Dispensing button SS to display the fig 12 counters option see fig 12 The machine has the following 4 counters Litres volume of water dispensed by the machine indicator used for descaler maintenance cycles Service number of coffees dispensed indicator used for servicing Number of coffees infusions dispensed a Number of coffees dispensed per button MESSAGES AND ALARMS Flow meter Gr X Time out alarm Boiler filling up Probe unconnect Service 999999999 Change filter 999999999 Fault in flow meter X Flow fault detected in counter X Check that the machine is receiving water Temperature sensor fault Service the machine To disable the alarm and reset the counter Turn off the machine Simultaneously press and hold down the Short Espresso and Long Espresso buttons Turn on the machine Regenerate the filter To disable the alarm and reset the counter Turn off the machine Simultaneously press and hold down the 2 Short Espressos 69 and 2 Long Espressos 69 buttons Turn on the machine
29. ta fil er Mto the GOUP uias sense lbesscasgcbsenhssedesunbeebescassndsohaatsndesbivebusenansteiteoseays 22 OPERA TO N A Espresso brewing Steaming and frothing milk with the turbo steamer Hot water dispensing CLEANING AND MAINTENANCE Machine cleaning Dailv cleaning schedule Weekly cleaning schedule Cleaning the brewing group and porta filter Cleaning the gasket and shower plate sss scccsssssssssscescsssassszessssossnssseusesovensssocoscnasadiessasedssstedsabsuniventestonssnosessssassenassdonecosnsie STORAGE FIND DISPOSAL ii ei iii pana a eden Additional handling of the machine Long term storage Machine disposal amd recycling sssssssssscsscissscnsssssssssscassscsasssseasssossesscansusasbesasstosctsssedsesisecascescossvevosssesnossensdesspsauseaasersbenssntte PROGRAMMING Buttons functions Additonal button functions Programming the turbo steamer temperature Programming the coffee dosage sismos aiidas e seei rrsan eisa oioi EEEa ar EE EEIN PROGRAMMING USING THEDISPLA Y sdissitiapaucnnaesiauiamcinauiiiocausinsionnues 32 Machine status Accessing the second menu level Setting the clock hours minutes and day Auto On Off ssesseeeesenzanzena Counters MESSAGES AND ALARM S rrano E ANCAR HERH 35 TROUBLESHOOTING sorana NNA EEN ATAN ER 36 SYMBOL DESCRIPTION Notification intensity levels 0000000000 There are four different levels of notification intensity
30. the Left hand drink buttons and hold it down for over 8 seconds until the dose programming menu is displayed All the drink buttons lights will be turned on and the Continuous Dispensing button light will flash The display will be as shown in fig 06 Hold down the Continuous Dispensing button G until the menu displays the set clock option see fig 07 This provides access to the second menu level Clock adjust hh mm Day fig 08 To set the clock press the 2 Short Espressos button 2S whilst the Set clock message is displayed The hours values will start flashing Increase decrease the values by pressing the Short Espresso and Long Espresso buttons see fig 08 With the desired value is reached accept it the pressing the 2 Short Espressos button 2S The minutes digits will now start flashing Increase decrease the values by pressing the Short Espresso and Long Espresso buttons With the desired value is reached accept it the pressing the 2 Short Espressos button 2S A Set the day of the week in the same way l and 69 After setting the values pressing the 2 Short Espressos button 69 accesses the Auto On Off menu PROGRAMMING USING THE DISPLAY Auto Ono Auto On Off After accepting the changes made in the set clock menu pressing the 2 Short Espressos button fee accesses the coffee machine s auto on off On hh mm programming menu see fig 09 To
31. the blind gasket in a convenient location for future use Note lt gt Rinse the group and porta filter with hot water using only the blind gasket and hot water no cleaning powder each day Clean the group and porta filter with cleaning powder once a week Note Only use professional cleaning powder designed specifically for espresso machines It s avalible from the distributor CLEANING AND MAINTENANCE Cleaning the gasket While making espresso coffee grounds will naturally accumalate on the group s sealing surface Allowing an excessive amount of grounds to build up can prevent the the porta filter from properly sealing to the group head In extreme cases such as leaving a used porta filter in the group head for several days water can even become blocked from passing through the shower plate To prevent these problems perform the following cleaning procedures daily Install the blind basket into the porta filter without cleaning powder Place the porta filter loosely in the group head do not close it fully Press the Continuous button a Perform an opening closing motion with the porta filter in place without closing it fully Water will flow over and around the porta filter passinging through the closing surface and washing out any coffee residue Be very careful to_avoid splashes as this water is very hot and can cause burns Press the Continuous button again to stop the water flow 7
32. tion use and maintenance Do not attempt to remove covers or safety shields to access the interior of this machine or make repairs Repairs should be made by an authorised technician or service centre Owners are liable for ensuring that users have been properly trained to operate the machine and understand the potential risks involved The owner or installer will be liable for all non authorised modification of the machine Non authorised alteration or modification of the machine will immediately void the manufacturer s warranty This manual references the machine at the time of sale The commercial availability of subsequent versions including modifications upgrades or adaptations does not oblige the manufacturer to apply any changes to this machine nor is it obliged to update the documentation supplied The manufacturer reserves the right to withdraw currently available manuals whenever deemed appropriate and reasonable Periodically some updates and changes may be required for this machine In this event a technician will be responsible for ensuring the change is made in accord with manufacturer s specifications Note The manufacturer is not liable for damage to persons or property resulting from failure to follow the instructions and warnings listed below when installing and using this machine Install the machine in a horizontal position and away from heat sources and flammable objects This machine should only b
33. within this manual as identified by signal words DANGER WARNING IMPORTANT and NOTE The level of risk and imporance of the notification is determined by the following definitions Always observe the warnings to ensure safety and prevent potential injury and product damage A A A Important Alerts against unsafe practices Observe Important notifications to ensure food safety prevent possible minor personal injury or damage to the machine WARNING Indicates a potentially hazardous situation which if the WARNING is ignored could result in serious injury or even death DANGER INDICATES A IMMINENTLY HAZARDOUS SITUATION WHICH IF NOT AVOIDED WILL LIKELY RESULT IN SERIOUS INJURY AND EVEN DEATH Note Gives additional information which may be helpful during the operation routine maintenance and cleaning of the machine GENERAL New Elegance Thank you for choosing a New Elegance espresso machine We hope you enjoy it Read the user manual before using the machine This manual contains important instructions on intended and safe use of the coffee machine Keep this manual close to hand for future reference If damaged or lost request a copy from the manufacturer Machine installation and certain maintenance operations should only be performed by qualified service personnel All safety instructions and warnings contained in this manual should be observed at all times to ensure safe installa
Download Pdf Manuals
Related Search