ANSPOWS01 Manual
Contents
1. observe the procedures outlined in this manual Distributed by DE S Answer RC Itd Unit 14 Peel Ind Est Bury BL9 OLU UK www answer re com 2 22. INSTRUCTION MANUAL POWER SWITCH Thank you very much for your trust in the products of Answer RC Please read this user manual carefully before using this product to avoid any problems in advance Please also pay attention to the technical data and limits of this product INTRODUCTION Answer RC introduces the POWER SWITCH a tiny MCU controlled on off switch for your radio controlled model A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double side tape Two kinds of bottom covers are included user can change the bottom cover The switch also features a LiPo mode by turning this on the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis charging This of course can be turn off if you have other safeguards in place or using NiIMH NiCad battery Beside that the power switch informs you about the remaining capacity and conditions of your battery pack SWITCH ON OFF SETUP 1 NiIMH NiCad Battery Pack For switching on please press and hold the button for one second The PWR LED will turn on For switching off please press and hold the button until all LEDs turn off The PWR LED also shows you the remaining battery capacity when switched on SWITCH ON SWITCH OFF
3. Press and hold the button for one second Press and hold the button until all LEDs turn off Green 80 100 Orange 60 79 Red 20 59 Red Blinking lt 20 1 2 2 LiPo Battery Pack For switching on please press and hold the button for more than three second The PWR LED and LIPO LED will turn on For switching off please press and hold the button until all LEDs turn off The PWR LED also shows you the remaining battery capacity when switched on SWITCH ON SWITCH OFF Press and hold the button for moradhan three second Press and hold the button until all LEDs turn off Green 80 100 Orange 60 79 Red 20 59 Red Blinking lt 20 SPECIFICATIONS Input Voltage 4 12V Low Voltage Protection 6 2V LiPo Max Current 10 Amp Operating temperature 0 50 C Battery Mode 1 NiHM NiCad 2 LiPo Weight lt 7g With Transponder Mount Without Transponder Mount WARRANTY AND SERVICE We guarantee this product to be free of manufacturing and assembly defects for a period of one year from the time of purchase The warranty only applies to material or operational defects which are present at the time of purchase During that period we will repair or replace free of service charge for products deemed defective due to those causes You will be required to produce proof of purchase invoice or receipt This warranty is not valid for any damage or subsequent damage arising as a result of misuse modification or as a result of failure to
Download Pdf Manuals
Related Search