S1500 user`s manual v1.1
Contents
1. Warnings mM Never leave the power supply unattended when it turn on If any malfunction is observed please turn off the power supply as fast as possible mM Keep away the power supply from dust damp rain heat direct sunshine and vibration Do not drop it mM The power supply should be set up on non inflammable and non conductive surface Never place on a car seat carpet or similar E Keep all the inflammable volatile materials well away from operating area E Do not attempt to charge any types of battery including below Lead acid battery or VRLA NIMH NICd battery pack Li ion and lithium polymer battery Warranty and Service S www chargery com page total amp CHARGERY 1500 High efficiency wide input voltage PFC programmable Power supply 90V 265VAC input 10V 25VDC output CHARGERY 60Amps 1500W max Chargery Power Co Ltd as manufacture of R C model power warrants 1500 power supply to be free of defects in material and workmanship This warranty is effective for 24 months from date of purchase If within the warranty period the customer is not satisfied with the products performance resulting from a manufacturing defect the accessory will be replaced or repaired This warranty does not cover the damage due to wear misuse incompetent handling or using of incorrect accessories CHARGERY power Chargery Power Co LTD Tel 86 0 755 2643 6165 fax 86 0 755 2641 2865 Email jasonwang3a 163 c2. 1500 PFC programmable Power supply High efficiency wide input voltage 90V 265VAC Input CHARGERY 10V 25V DC Output 60Amps 1500W max Thanks for your purchasing the intelligent and powerful power supply Read the ENTIRE instruction manual to become familiar with the features functions of the device before operating Feel free to send an email to jasonwang3a 163 com_ or call at 86 755 2643 6165 should you have any questions and suggestions Wh 7 Jason Wang 2013 Chargery Power Co Ltd 06 18 2013 V1 1 Add Room 6 303 Langginyu Chuangye Road NanShan 518054 ShenZhen China Tel 86 755 2643 6165 Fax 86 755 2641 2865 Email Jasonwang3a 163 com 1500 High efficiency wide input voltage PFC programmable Power supply 90V 265VAC input 10V 25VDC output _C ARGERY O GOAS 1500W max Features S1500 is a high efficiency wide input voltage PFC power supply the device can output 1500W at AC9OV 265V in a smaller size Many creative technology help to realize up to 94 of efficiency and the internal temperature is still under 80 C The following are some new features Application CHARGERY Intelligent control output voltage and current by microprocessor 100 calibration before delivery 1 voltage and current accuracy Active PFC smaller AC input current less interference and Conform to European Commission Regulation no 278 2009 and Energy Star Version 2 0 AC 90 265V worldwide operation nee
3. value blink then change the value with the DEC or INC buttons The new value will be confirmed and saved by pressing the Start Enter button again www chargery com page 3 total 8 CHARGERY 1500 High efficiency wide input voltage PFC programmable Power supply 90V 265VAC input 10V 25VDC output CHARGERY 60Amps 1500W max Press DEC or INC buttons alternate different items and press STOP SET to quit the setup menu Setup the maximal output current range from 5A 60A step 1A default 60A The maximal current can protect your charger or loads from damaging Setup the Temperature unit C or F default C Setup the working mode of fan Options Long life Normal and Low noise Long Life means the fan will start at lower temp to extend the unit life Low Noise means the fan start at higher temp it will cause a low noise at light load Normal is default setup the fan start at middle temp level The beeper sounds for each button press to confirm your action A beeper sounds at various times during operation to alert the user to mode changes These sounds can be ON or OFF This menu sets the back light time of LCD screen backlight Options 1MIN SMIN 10MIN 20MIN and Always on default SMIN At default 5min LCD back light will be off to save the power press any button can turn on the back light Note E All parameters will be remembered by the 1500 till next change m After increase setup voltage if actual
4. 20VAC and 100 of load Output E Voltage 10 25V programmed M Voltage accuracy 1 E Ripple voltage 150mV E Current O 60A 62A MAX Protection mM Over voltage protection 25 5V max M Over current protection 62A max E Over load protection 1550W max E Over temperature protection 90 C max E Short circuit protection on output Mechanical Characteristics M Size 252 145 68 L W H mm or 9 9 5 7 2 7 L W H inch E Weight 2 3Kg without input cable E Input power cable AWG14 wire 1 5m length E Output DC connector 3 pairs 4mm gold banana female connector each connector for up to 20A maximal current www chargery com page D total amp CHARGERY 1500 High efficiency wide input voltage PFC programmable Power supply 90V 265VAC input 10V 25VDC output CHARGERY 60Amps 1500W max One 4 5mm gold male connector XT90 for up to 60A Packaging Information S1500 base unit 1pcs Power cable 1pcs Manual 1pcs XT 90 female connector with AWG10 silicon glue wire 1pcs The XT 90 Female connector used to connection of 1500 and your charger or other loads at 60A Optional Accessory The following adapter wire XT90 female to EC5 female length 100mm AWG10 is for Cellpro PowerLab 8 1344W charge power and iCharger 4010DUO 2000W charge power Then S1500 can power the chargers perfectly and get the maximal charge power safety and reliably To Charger To 1500 Error
5. Information When the following error events trigged the beeper will sound for 10 seconds and error information will flash you can press STOP SET to turn off the beeper and flash www chargery com page 6 total 8 CHARGERY High efficiency wide input voltage PFC programmable Power supply 90V 265VAC input 10V 25VDC output _C ARGERY Amps 1500W max Over voltage Output voltage over 10 of setup value for 2 On power off page the setup voltage and seconds 1500 turn off automatically and turn on over voltage displayed in turn manually Overcurrent Output current over 10 of setup for 2 seconds On power off page the setup current and S1500 turn off automatically and turn on manually over current displayed in turn The heat sink temperature over 90 C for 2 On power off page the internal Over temperature seconds S1500 turn off automatically and turn on temperature and over temperature automatically displayed in turn Shorteircuit Output voltage is under 10V for 2 seconds and 3 On power off page the setup voltage and times repeatedly S1500 turn off automatically and short circuit displayed in turn turn on manually Related parts MODEL DESCRIPTION COMMENTS S400 High efficiency wide input voltage PFC power supply 6 15V 25A 400W output 6 S600 High efficiency wide input voltage PFC power supply 15V 40A 600W output 1200 High efficiency wide input voltage PFC power supply 12 24V 50A 1200W output
6. d not any alternative switcher worldwide safe operation Low power consumption less than 1W at idle mode and standby mode Up to 94 of convert efficiency Programmable output voltage from 10 to 25V Programmable output current from 5 to 60A 1 8 TFT color LCD display output Voltage current power and internal temperature on time Over current over voltage over load over temperature and short circuit protection Short circuit protection on output safer and more reliable 2 Intelligent cooling fans turned on upon the temperature automatically 4 outputs can do more chargers simultaneously 3 pairs 4 0mm gold connector up to 20A each output one 4 5mm gold connector XT 90 up to 60A ZVS ZCS and Synchronous Rectification assure the highest efficiency High power density 652W Kg Start at no load or full load Approved by CE 24 months warranty Home application 10 25V DC charger balance charger for RC mode www chargery com page 2 totalS 1500 High efficiency wide input voltage PFC programmable Power supply 90V 265VAC input 10V 25VDC output 60Amps 1500W max CHARGERY mM E bike E scooter battery charger Operation 1 Connect 1500 to AC 110 220V outlet by the special heavy power cable if use other brand cable please note the wire AWG must be AWG14 at least 2 2 seconds later default output voltage 12V and maximal output current can be displayed actual power and internal temperature is also display
7. ed but S1500 is at idle mode power off to save power consumption as the following picture 1 Confirm the voltage and current is suitable for your charger and other load then press START ENTER button turn on 1500 the LCD will display actual output voltage current output power and internal temperature as the following picture 2 Power OFF Power ON Actual power Setup voltage Actual voltage Setup current Actual current Internal temperature gt 7 A START Fi Ms i i 2 t a P j Fi hs I Pa d P i he SET DEC INC ENTER Picture 1 Idle mode Picture 2 work mode If the voltage is NOT suitable for your charger or other load press INC or DEC button setup the voltage It is easy to adjust as same as a potential meter and need not confirm the change because the voltage will be updated with your operation Finish the voltage setup the device can remember the new value till next change You can also change the voltage at any time whether power on Temp Unit or power off status an gt bong life i i Key B If need change the maximal current or other items please eee Fin Operate according to the following steps 3 Press STOP SET button for 2 seconds can enter into Program Setup menu The LCD displays the following information in Picture 3 Program setup sequence and you can change the value When you want to alter a parameter value press the Start Enter button to the
8. om Homepage www chargery com CE Z www chargery com page 8 total amp CHARGERY
9. voltage doesn t increase please enter into program setup menu and then increase the maximal current limitation Mm After increase maximal current imitation if actual current limitation doesn t increase please increase setup voltage value mM You can setup all parameters on power on and power off status at any time Voltage can be setup press DEC or INC button directly but other items must be enter into the setup menu and then change it E At any time you can press the STOP SET button turn off the power supply 1500 will work in idle mode to save power consumption till disconnect the 1500 to the AC outlet Generally you needn t disconnect S1500F from AC outlet because the S1500 consume under 1W power at idle mode When you need power your load such as charger etc what you do is press the START ENTER button www chargery com page 4 total 8 CHARGERY 1500 High efficiency wide input voltage PFC programmable Power supply 90V 265VAC input 10V 25VDC output 60Amps 1500W max CHARGERY again Environment Requirements E Ambient Temperature 10 45 C E Ambient Humidity 5 95 E Storage Temp 20 C 70 C O E Storage Humidity 30 90 asies bat Input M Rated Voltage AC110 220V Voltage allowed AC90 265V Rated Freq 50 60Hz Freq Allowed 47 63Hz Max Current 18A 90V 7 5A 220V Efficiency 94 at 65 load and 220Vac input Active PFC PF gt 0 99 at 9OVAC and 100 of load PF gt 0 97 at 2
Download Pdf Manuals
Related Search