WARNING Indicates a hazardous situation
Contents
1. 117105 9 1 3 8 800 100 57 31 27 21025 ce GB ODER PO GDROGDEDED ODED CMG RD CE RO UA GE 06 12 Whirlpool Registered trademark TM Trademark of Whirlpool USA Copyright Whirlpool Europe s r l 2014 All rights reserved http www whirlpool eu2. IMPORTANT SAFETY INSTRUCTIONS These instructions shall also be available on website www whirlpool eu VOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT This manual and the appliance itself provide important safety messages to be read and always observed This isthe danger symbol regarding safety warning of potential risks to users and others All safety messages will be preceded by the danger symbol and the following words DANGER Indicates a hazardous situation which if not avoided will result in serious injury AA ASIN Indicates a hazardous situation which if not avoided could cause serious injury All messages relevant to safety specify the potential risk to which they refer and indicate how to reduce the risk of injury damage and electric shocks due to incorrect use of the appliance Make sure to comply the following Use protective gloves to perform all unpacking and installation operations The appliance must be disconnected from the power supply before carrying out any installation operation Installation and maintenance must be carried out by a specialised technician in compliance with the manufacturer s instructions and the local safety regulations in force Do not repair or replace any part of the appliance unless specifically stated in the user manual The appliance must be earthed The power cable must be long enough for connecting the appliance fitted in the cabinet
3. INDUCTION o 5 4 Flexi cook Where present this function allows the cooking zone to be used as two separate zones or as a single extra large zone Itis perfect for oval rectangular and elongated pans with maximum base dimensions of 38x23 cm or more than one standard pan in the same time In order to activate the flexicook function switch on the hob press simultaneously the 2 selecting buttons of the zones as shown in the picture below the two cooking zone displays show level 0 both dots next to the level number are lit indicating that the Flexi cook is activated 7 TIMER Or D T ii _ INDUCTION le u ao co _ To change the power level from 1 to max 9 or P press the buttons To deactivate the Flexi cook function press simultaneously the 2 selecting buttons of the zones To switch off the zones instantly hold one of the zone selection button for 3 seconds O The message no pot H y Will appear on the display of the zone that is not able to detect any pot because of missing pot or misplaced or not suitable for induction hob This message remains active for 60 seconds in this time you can add or slide pots within the flexicook area as you prefer After 60 seconds if no pan is placed on the zone the system stops searching pots on that zone the symbol U remains visible on the display to remind thatthe zone is disab
4. lt O 4 4 Y l 2 RS 7 4 RIE MA Ro s T g L2 s 52 LS 19 I E ia 8 di p 2 2 2 Important Based on the wiring diagram see figure either keep or remove the metal jumpers between the screws on the terminal block 11 12 and 1 2 If the cable is provided see the connection instructions attached to the cable Make sure all six screws on the terminal block are tightened after connecting the cables Example of jumper present left or removed right See the wiring diagram for details the jumpers can be between 11 12 and between N1 N2 TE N i Connect the l earth wire to the terminal with the symbol This wire must be longer than the other wires 1 Remove the terminal block cover A undoing the screw and inserting the cover in the terminal block hinge 2 Insert the power cable in the cable clamp and connect the wires to the terminal block as indicated in the connection diagram located near it 3 Secure the power cable with the cable clamp 4 Close the cover and screw it on the terminal block with the previously removed screw Each time the power is
5. Overheated oils and fats catch fire easily Pay attention when cooking food products rich in fat and oil separator panel not supplied must be installed the compartment under the appliance f the surface is cracked switch off the appliance to avoid the possibility of electric shock only for appliances with glass surface The appliance is not intended to be operated by means of an external timer or separate remote control system Unattended cooking on a hob with fat or oil can be dangerous and may result in fire NEVER try to extinguish a fire with water but switch off the appliance and then cover flame e g with a lid or a fire blanket Danger of fire do not store items on the cooking surfaces not use steam cleaners Metallic objects such as knives forks spoons and lids should not be placed on the hob surface since they can get hot After use switch off the hob element by its control and do not rely on the pan detector only for induction appliances SAFEGUARDING THE ENVIRONMENT Disposal of packing The packing material is 100 recyclable and marked with the recycling symbol The various parts of the packing must not be dispersed in the environment but disposed of in compliance with local regulations Disposal This appliance is marked in conformity with European Directive 2012 19 EU on Waste Electrical and Electronic Equipment WEEE By ensuring that this appliance is correctly disposed
6. connected the hob performs an automatic check for a few seconds If the hob already has a power cable follow the instructions attached to the cable Connect the appliance to the power supply by means of a multipole switch with minimum contact gap of 3mm INSTRUCTIONS FOR USE E Control Panel Description Control panel Power management step 1 On Off Timer Control panel lock Special function Power management step 1 Power management step 2 LY 2 TIMER O INDUCTION Cooking zone controls and corresponding display EN9 Switching the hob ON OFF To switch the hob on press the 1 button for approx 2 seconds until the cooking zone displays light up To switch off press the same button until the displays switch off All the cooking zones are deactivated If the hob has been in use the residual heat indicator remains lit until the cooking zones have cooled down If within 10 seconds of switching on no function is selected the hob switches off automatically Switching on and adjusting cooking zones Powerindicator display Li Selected cooking zone indication Cooking zone positioning Place the pot on the cooking zone switching the hob on activate the required cooking zone by pressing the corresponding button 0 appears on the display It is possible to select the required power level fro
7. of the user can help prevent potentially negative consequences for the environment and the health of people The symbol A on the appliance or the accompanying documentation indicates that this product should not be treated as domestic waste but must be taken to an appropriate collection point for recycling WEEE Energy saving tips For optimum results it is advisable to Use pots and pans with bottom width equal to that of the cooking zone Only use flat bottomed pots and pans When possible keep pot lids on during cooking Use a pressure cooker to to save even more energy and time Place the pot in the middle of the cooking zone marked on the hob DECLARATION OF CONFORMITY C This appliance has been designed manufactured and marketed in conformity with the safety requirements of Low Voltage Directive 2006 95 EC replacing 73 23 EEC as amended and protection requirements of Directive 2004 108 EC This appliance meets the eco design requirements of European Regulation N 66 2014 in conformity to the European standard EN 60350 2 BEFORE USE IMPORTANT The cooking zones will not switch on if pots are not the right size Only use pots bearing the symbol INDUCTION SYSTEM Figure opposite Place the pot on the required cooking zone before switching the hob on EN7 EXISTING POTS AND PANS Ichi EE Use a magnet to check ifthe pot is suitable for the induction hob pots and pans are unsuitable if not magneticall
8. positioned or not of the correct dimensions for your induction hob the message no pot will appear in the display see figure at side If no pot is detected within 60 seconds the hob switches off Fast boil function Booster This function only present on some cooking zones makes it possible to exploit the hob s maximum power for example to bring water to the boil very quickly To activate the function press the button until appears on the display After 10 minutes use of the booster function the appliance automatically sets the zone to level 9 Power management Function where it is available Thanks to the Power management function the user can set the maximum power the hob can reach as required This setting is possible at any time and is maintained until the next change By setting the required maximum power the hob automatically adjusts distribution in the various cooking zones ensuring that this limit is never exceeded with the advantage of also being able to manage all the zones simultaneously but without overload problems 4 maximum power levels are available and showed on display 2 5 4 0 6 0 7 2 kW 7 2 kW is considered as max power of cooktop At the time of purchase the hob is set to maximum power After plugging the appliance into the electrical socket in the first 60 seconds it is possible to set the required power level by running the following points Control pan
9. 7 27 35 45 54 63 73 83 92 101 110 120 129 137 146 156 167 177 186 Instructions for use Bedienungsanleitung Mode d emploi Instruc es de utilizac o O nyisc xp on lt Uputstvo za upotrebu Navodila za uporabo Uputama za uporabu Lietosanas noradijumi Naudojimo instrukcijos Kasutusjuhend Instrukcja obstugi N vod k pouzit N vod na pouz vanie Haszn lati tmutat Instructiuni de utilizare leas Jeri y Page Seite Page P gina Strana Stran Stranica Lappuse Puslapis Lehek lg Strona Strana Strana Oldal Pagina a da a 19 28 37 46 56 64 74 85 93 102 111 121 130 139 148 158 168 178 187 Min 6 5 mm 8 mm 0 560 mm Min 50 mm er ae 0 583 2 mm 11 5 0 490 2 mm SS R 11 5mm 6 mm R Min 6 5 mm 8 Min 6 5 mm 0 8 mm 750 mm fin 2 2 Min 50 mm 0 773 mm R 11 5 mm Min 50 mm 0 490 2 mm 513 7 ASES A 11 5 7 m R Min 6 5 mm oy The 8
10. Gebrauchsanweisung Brugsanvisning Instructions for use Bruksanvisning Mode d emploi K ytt ohje Gebruiksaanwijzing Manual de utiliza o Istruzioni per l uso Instrucciones para el uso u a O nyies xp ons N vod k pouzit Instrukcje uzytkowania Navod pouzitie Hasznalati utasitas Instructiuni de utilizare Whirlpool SENSING THE DIFFERENCE Whirlpool SENSING THE DIFFERENCE 210 mm Timer Whirlpool _ _ 145 mm 210 mm oF Whirlpool ENGLISH DEUTSCH FRANCAIS PORTUGU S lt 5 SLOVENSKO HRVAT LATVIESU LIETUVI EESTI POLSKI ESKY SLOVENSKY MAGYAR YKPAIHELIb Ay al Installation Installation Installation Instalacao Eykatdotaon Montaza Namestitev Montaza Uzstadisana Paigaldamine Instalacja Instalace Instal cia zembe helyez s Instalarea Qs ji Seite Page P gina zeNida Strana Stran Stranica Lappuse Puslapis Lehek lg Strona Strana Strana Oldal Pagina e da a 1
11. el Display Press for approximately 3 seconds both Power management button step 1 Press the Power Management button step 2 to confirm the previous The display shows step Press to set the chosen level The light comes on together with the in use amongst the different lights for the individual cooking zones options available Press the Power The display shows the set level which flashes Management button step for approximately 2 seconds after which the 4 to confirm the previous hob emits an acoustic signal and then turns step itself off it is now ready for use In case of an error when setting the power the symbol appears in the middle and an acoustic signal sounds for about 5 seconds this case repeat the configuration procedure from the beginning Ifthe error occurs again contact the After Sales Service During normal use if the user tries to increase the maximum available power level when reached the level of the zone in use flashes twice and an acoustic signal sounds To obtain a higher power in that zone it is necessary to manually decrease the power level of one or more already active cooking zones EN11 Activation deactivation of the acoustic signal After switching the hob on press and hold the of the first cooking zone and the external button on the right simultaneously for at least five seconds as shown below b 2 TIMER Ww Ww gt O gr
12. g the corresponding zone button first and then the button O Keep Warm Lu This function automatically sets a power level that keeps just cooked food hot and serving dishes warm with induction suitable accessory Press the key A appears on the display and the indicator light turns on To deactivate the function simply press button EN10 Simmering l After bringing to the boil press the key and the hob will automatically set the correct power level to keep the pot simmering A appears on the display the indicator light lights up To deactivate the function simply press button Melting This function maintains a permanently low temperature in the cooking zone After positioning the pot accessory on the chosen cooking zone switch on the hob and select the cooking zone Press the key A appears on the display and the indicator light turns on To deactivate the function simply press button Residual heat indicator The hob is fitted with a residual heat indicator for each cooking zone These indicators alert the user when cooking zones are still hot Ifthe display shows H the cooking zone is still hot If the residual heat indicator of a given cooking zone is lit that zone can be used for example to keep dish warm or to melt butter When the cooking zone cools down the display goes off Incorrect or missing pot indicator Y If you are using a pot that is not suitable not correctly
13. heat indicated by an H power NOTE When making quick cook foods that require perfect heat distribution e g pancakes on the 28 cm double cooking zone where present use pans no greater than 24 cm in diameter For delicate cooking for example melting chocolate or butter use the smaller diameter single zones Low power EN14 pon c p n 21024 117105 9 1 8 800 100 57 31 27 21025 400010765073 21024 BA 01601 42 44 0 800 501 15 00 27 21025 21024
14. led To reactivate the Flexicook function press one of the 2 respective buttons _ co The Flexi cook function is also able to detect when a pot is moved from one zone to the other one within the flexi cook area keeping the same power level of the zone where the pan originally was placed see the example in the figure below if the pot is moved from the front heater to the rear heater the power level will be shown on the display corresponding to the zone where the pot is placed It is also possible to operate the Flexi cook area as two independent cooking zones using the corresponding button of the single zone Place the pot in the center of the single zone and adjust the power level with the slide touchscreen O Important make sure to place the pans centered on the cooking zone in the way to cover the center of the single cooking zone In case of big pot oval rectangular and elongated pans make sure to place the pans centered on the cooking zone Examples of good pot placement and bad pot placement al al FLEXI FLEX EN12 CLEANING use steam cleaners AN WARNING Before cleaning make sure the cooking zones are switched off and that the residual heat indicator H is not displayed IMPORTANT Do not use abrasive sponges or scouring pads Their use could eventually ruin the glass After each use clean the hob when it is cool to remove any deposits and stains due to food re
15. ly increasing the temperature of food to fast boiling in the case of water or rapidly heating cooking liquids Frying boiling Ideal for browning starting to cook frying deep frozen products fast boiling Browning saut ing boiling Ideal for saut ing maintaining a lively boil cooking and grilling for a short period of time 6 7 4 5 grilling 5 10 minutes Browning cooking stewing Ideal for saut ing maintaining a light boil cooking and grilling for a medium period of time saut ing grilling 10 20 minutes preheating accessories High power Cooking stewing saut ing grilling i Ideal for long cooking recipes rice sauces roasts fish with liquids e g water wines broth milk Medium power 3 4 Cooking simmering creaming pasta Ideal for stewing maintaining a gentle boil cooking for a long period of time Creaming pasta thickening creaming Ideal for long cooking recipes less than a litre in volume rice sauces roasts fish with liquids e g water wines broth milk Ideal for softening butter gently melting chocolate thawing small products and keeping just cooked Melting defrosting keeping food warm e g sauces soups minestrone food warm creaming Ideal for keeping just cooked food warm for creaming risottos and for keeping serving dishes warm with induction suitable accessory Support surface Hob in stand by or off mode possible end of cooking residual
16. m min 0 to max 9 or booster if available To increase the power level push the button To decrease the power level push the button Deactivation of cooking zones To switch off the cooking zone press the corresponding and button for more than 3 seconds The cooking zone switches off and if still hot the letter appears on the zone display Control panel lock This function locks the controls to prevent accidental activation of the hob To activate the control panel lock switch the hob on and press the Timer button for three seconds an acoustic signal and a luminous indicator near the padlock symbol signal activation The control panel is locked except for the switching off function To deactivate the control lock repeat the activation procedure The luminous dot goes off and the hob is active again The presence of water liquid spilled from pots or any objects resting on the button below the symbol can accidentally activate or deactivate the control panel lock Timer TIMER The timer can be used to set the cooking time for a maximum of 99 minutes 1 hour and 39 minutes for all the cooking zones Select the cooking zone to be used with the timer press the timer and a beep signals the function see figure The display shows 00 and the LED indication comes on The Timer value can be decreased and increased by keeping the slider function and buttons pressed When the set
17. ms made of several layers of material or uneven bottoms These noises vary depending on the pots and pans used and the amount of food they contain and are not indicative of a defect of any kind In addition the induction hob is equipped with an internal cooling system to control the temperature of electronic parts as a result during operation and for several minutes after the hob has been switched off the noise of the cooling fan will be audible This is perfectly normal and indeed essential for proper functioning of the appliance AFTER SALES SERVICE Before contacting the After sales Service 1 See if you can solve the problem yourself with the help of the Troubleshooting guide 2 Switch the appliance off and then on again it to see if the problem has been eliminated If the problem persists after the above checks contact the nearest After Sales Service Always specify a brief description of the fault the product type and exact model the Service number the number after the word Service on the rating plate located under the appliance on the metal plate your full address your telephone number SER 0000 000 00000 If any repairs are required contact an authorised After Sales Service Centre to ensure the use of original spare parts and correct repairs Spare parts are available for 10 years EN13 POWER LEVEL TABLE Power level Type of cooking Level use indicating cooking experience and habits N Ideal for rapid
18. siduals Sugar or foods with a high sugar content damage the hob and must be immediately removed Salt sugar and sand could scratch the glass surface Use a soft cloth absorbent kitchen paper or a specific hob cleaner follow the Manufacturer s instructions TROUBLESHOOTING GUIDE Read and follow the instructions given in the section Instructions for use Check that the electricity supply has not been shut off Dry the hob thoroughly after cleaning it If when the hob is switched on alphanumeric codes appear on the display consult the following table for instructions If the hob cannot be switched off after using it disconnect it from the power supply ERROR CODE DESCRIPTION POSSIBLE CAUSES ERROR ELIMINATION The control panel switches off 81 82 because of excessively high temperatures The internal temperature of electronic Wait for the hob to cool down parts is too high before using it again The sensor detects a discrepancy Disconnect the hob from the F42 or F43 The connection voltage is wrong between the appliance voltage and mains and check the electrical that of the mains supply connection F12 F21 F25 F36 7 F40 F47 F56 F58 F60 Call the After Sales Service and specify the error code NOISES MADE BY THE HOB Induction hobs can make whistling or crackling sounds during normal operation these actually come from the pots and pans as a result of the characteristics of the bottoms for example botto
19. sture which could damage them In the case of flush mounted installation call the After Sales Service to request assembly of screws kit 4801 211 00112 To remove the hob use a screwdriver not provided to prise off the perimeter clips on the underside of the appliance ELECTRICAL CONNECTION Disconnect the appliance from the power supply AN WARNING Installation must be carried out by qualified personnel who know the current safety and installation regulations The manufacturer declines all liability for injury to persons or animals and for damage to property resulting from failure to observe the regulations provided in this chapter The power cable must be long enough to allow the hob to be removed from the worktop Make sure the voltage specified on the dataplate located on the bottom of the appliance is the same as that of the home EN8 Connection to the terminal block For the electrical connection use an HO5RR F or HO5V2V2 F cable as specified in the table below Es 1 PILI TILA 2 R R 5x1 5 mm 4x1 5 mm AERO A ES 5 gt pls YA LIND ln2 380 415V2N 220 240 V 3 Belgium only 380 415 V 2N Holland only
20. time has elapsed an acoustic signal sounds and the cooking zone switches off automatically To deactivate the timer keep the Timer button pressed for at least 3 seconds To set the timer for another zone repeat the above steps The timer display always shows the timer for the selected zone or the shortest timer To modify or deactivate the timer press the cooking zone selection button for the timer in question Control panel warnings Special functions If available Some models have special functions EcoBooster With the hob turned on select the cooking zone with the Eco Booster symbol inside it 2 To enable disable the function press the button The EcoBooster function allows the water to be brought to the boil and kept boiling avoiding spilling with a reduction of energy consumption To optimize this control and ensure the best energy saving it is advisable to use a pot with bottom width similar to that of the selected cooking zone The quality of the pot used the presence or absence of the lid or salt can affect the performance of the function 2 to 3 liters of water preferably at room temperature is recommended and it is advisable not to use the lid In any case it is advisable to keep a check on the boiling conditions and the amount of residual water Automatic function The function automatically sets a power level suitable for maintaining a low boil Activate this function after bringing to the boil pressin
21. to the power supply For installation to comply with the current safety regulations an omnipolar switch with minimum contact gap of 3mm is required not use multi sockets or extension cords not pull the appliancess power cable electrical parts must not be accessible to the user after installation The appliance is designed solely for domestic use for cooking food No other use is permitted e g heating rooms The Manufacturer declines any liability for inappropriate use or incorrect setting of the controls The appliance and its accessible parts become hot during use Care should be taken to avoid touching heating elements Very young 0 3 years and young children 3 8 years shall be kept away unless continuously supervised Children from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge can use this appliance only if they are supervised or have been given instructions on safe appliance use and if they understand the hazards involved Children shall not play with the appliance Cleaning and user maintenance shall not be made by children without supervision EN6 not touch the appliance heating elements during and after use Do not allow the appliance to come into contact with cloths or other flammable materials until all the components have cooled down completely not place flammable materials on or near the appliance
22. y detectable Make sure pots have a smooth bottom otherwise they could scratch the hob Check dishes Never place hot pots or pans on the surface of the hob s control panel This could result in damage RECOMMENDED POT BOTTOM WIDTHS N 17 min 28 cm max I2cmmin 18 max gt 15 cm min 21 cm max 10 cm min 14 5 max Flexi cook INSTALLATION After unpacking the product check for any damage during transport In case of problems contact the dealer or the After Sales Service For built in dimensions and installation instruction see the pictures in page 2 PREPARING THE CABINET FOR FITTING AN WARNING Install a separator panel under the hob The lower part of the product must not be accessible after installation Do not fit the separator panel if an undertop oven is installed min 5 mm 20 min 5 mm The distance between the underside of the appliance and the separator panel must respect the dimensions given in the figure In order to ensure the correct operation of the product do not obstruct the minimum required clearance between the hob and the top of the unit min 5 mm If an undertop oven is installed make sure the oven is equipped with a cooling system Do not install the hob above a dishwasher or washing machine so that the electronic circuits do not come into contact with steam or moi
Download Pdf Manuals
Related Search