Home

Operating Instructions

1. ERE Multi screen buttons Click the desired multi screen 1 4 or 5 8 button to display images on a multi screen EE image type buttons Click the desired button to change the image type to be displayed The selected button will turn green GEE image capture size buttons These buttons will be displayed only when a JPEG image is displayed Click the desired button to dis play image with the desired image capture size The selected button will turn green Internet 6 cy ev ZOOM buttons 2 Click the desire button to zoom in out the displayed image To return the zoomed image to the original size click the 1 button E3 o es Brightness buttons 2 Adjust the brightness of images D AUX buttons 2 Click the desired button to open close the AUX con necior 9 Camera name The set camera name will be displayed Alarm occurrence indication button 2 This button will be displayed and will blink when an alarm occurred When the button is clicked the but ton will disappear When Latch is selected for Alarm output setup the alarm output connector will be reset by clicking this button page 30 p 42 Audio button 3 Click this button to turn on off audio One shot button this button to take a picture a still picture The picture will be displayed on a newly opened window 4 Time and date Current time will be displayed in the set date time display fo
2. Server setup Network setup 7 Server setup button Maintenance Network setup button Help Maintenance button Time amp date setup Time display M zco Links 2005 01 01 0 00 Status display area SD memory card 2005 01 slao 00 w o0 oo 2 Main area Done Help button Live button Click this button to display the Live page gt GS Basic setup button Click this button to display the Basic setup page The basic settings such as time and date and cam era name and the settings relating to the NTP serv er and the SD memory card can be configured on the Basic setup page Refer to page 19 for further information GES Camera setup button Click this button to display the Camera setup page The settings relating to image from the camera such as image quality and brightness and the settings relating to audio can be configured on the Camera setup page Refer to page 22 for further informa tion D Multi screen setup button Click this button to display the Multi screen setup page The cameras to be used for the multi screen display can be registered on the Multi screen setup page Refer to page 27 for further information Internet QEGEE Alarm setup button Click this button to display the Alarm setup page The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence the alarm
3. FTP tab of the Network setup page Format the SD memory card only by clicking the Execute button on the setup menu Otherwise the following functions using the SD memory card may not work properly with this camera e Save obtain images when failed to transmit to the FTP server using the FTP periodic transmis sion function e Save obtain the system logs It is recommended to use Panasonic s SD memory card Otherwise the camera may not work properly or performance deterioration may be caused It is impossible to access the SD memory card in the process of formatting All data saved on the SD memory card will be delet ed when the SD memory card is formatted Do not turn the power of the camera off in the process of formatting After formatting the SD memory card available size may be smaller than the total size since the default directory is automatically created in the SD memory card 21 22 Configure the settings relating to images and audio Camera setup The settings relating images and audio such as brightness and image quality of JPEG MPEG 4 can configured on this page The Camera setup page has 3 tabs of the JPEG MPEG 4 tab the Camera tab and the Audio tab Configure the settings relating to JPEG image JPEG MPEG 4 Click the JPEG MPEG 4 tab on the Camera setup page page 16 Configure the settings such as Refresh interval JPEG Image capture size and Image quality on this page Ref
4. To designate time click and select the desired dow hour and minute 4 WV NP244 Network Camera Microsoft Internet Explorer When not designating time check the checkbox of 24 6 Uad coo Eco im Address http 192 168 0 10fadminjindex html 2005 01 01 0 00 h O u rs Network Camera WV NP244 WV NP244 A we Schedule setup Mon OTue Owed CJThu Ofri O am a 24hours 06 00 Mon OTue p Schedule 2 Setup menu v 24 hours 0 00 py 00 Wed Thu Fri Mon OTue Click the SET button after completing the settings ae z ver Ow DF Ds Camera setup The result will be displayed at the bottom of the win d OW Multi screen setup Authentication setup Server setup Z WY NP244 Network Camera Microsoft Internet Explorer File Edit View Favorites Tools Help Q sxx lt f gt a EA Z Search Sie Favorites A3 B B E Bry Address http 192 168 0 10 adminfindex html v gt Kes Links gt WV NP244 2005 01 01 0 00 A Maintenance Network Camera WV NP244 Help Live Internet MMon O24hnours Done Setup menu Owed Othu Ofri O Basic setup Schedule 3 24 hours 00 00 00 00 v Camera setup Mult screen setup Alarm setup Authentication setup Server setup Internet 44 Maintenance of the camera M
5. 2 eS E 33 Addre 192 168 0 10 vejindex html a Mgao ins WV NP244 ZOOM OREA Brightness F oven J aose Done Internet Step 3 Click the OK button after entering the user name and the password Connect to 192 168 0 10 EE 9 security dir User name Password Remember my password Click this button to display the setup menu Refer to the next page for further information about this menu 24 WY NP244 Network Camera Micros oft Internet Explorer File Edit View Favorites Tools Help ay Q gt x a Search She Favorites A 2 EA a 3 Address a http 192 168 0 10fadminfindex hea E EJs m WV NP244 Live Camera setup Mult screen setup Alarm setup Authentication setup Server setup Network setup Maintenance Help WV NP244 2005 01 01 0 00 Basic SD memory card WV NP244 a setup i ON Internet 15 How to operate the setup menu A WY NP244 Network Camera Microsoft Internet Explorer E aa im fee e e Ta When completing the setting items in field A click Q sxx amp a O Search she Favorites amp B Re El 3 ae ES _ the SET button below field A A 1 The edited set _ ting items in field A will not be applied unless the SET button below field A A 1 is clicked l o a oe os In the same manner above click the SET button a below field B B
6. Western 6550 Katella Ave Cypress CA 90630 2005 Matsushita Electric Industrial Co Ltd All Rights Reserved Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 Canada 905 624 5010 http Awww panasonic ca Panasonic Sales Company Division of Panasonic Puerto Rico Inc San Gabriel Industrial Park 65th Infantry Ave KM 9 5 Carolina P R 00985 809 750 4300 N1105 1125 3TROO4165BAA Printed in Japan
7. page page 28 Transmit an image onto a server automatically An alarm image can be transmitted at an alarm occurrence to the server designated in advance The settings required to transmit alarm image to a server can be configured on the Alarm tab of the Alarm setup page amp page 28 and the FTP tab of the Server setup page page 38 Notify of alarm occurrences by e mail Alarm mail alarm occurrence notification can be sent at an alarm occurrence to the e mail addresses registered in advance Up to 4 addresses can be registered as recipients of the alarm mail An alarm image can be transmitted at an alarm occurrence to the server designated in advance The settings for alarm mail can be configured on the Notification tab of the Alarm setup page page 33 and the Mail tab of the Server setup page page 37 Notify of alarm occurrences to the designated IP addresses Panasonic alarm protocol This function is available only when Panasonic device such as the network disk recorder is connected to the sys tem When ON is selected for Panasonic alarm protocol the connected Panasonic device will be notified that the camera is in the alarm state The settings for Panasonic alarm protocol can be configured on the Notification tab of the Alarm setup page page 33 Transmit Images onto an FTP Server Images can be transmitted to an FTP server By configuring the following settings transmission of images capt
8. Click the Network tab on the Network setup page page 16 The following information is required to configure the network settings Contact the network administrator or your Internet service provider e IP address e Net mask e Default gateway when using the gateway server router e HTTP port Number e Primary DNS Secondary DNS when using DNS lt Unavailable IP addresses gt i gt Ko 2005 01 01 0 00 A 0 FTP 7 a u 0 255 7 n xxx 0 209 127 0 0 1 Class D address 224 0 0 0 239 255 255 255 ae Class E address 240 0 0 0 255 255 255 255 ama cs aser Net mask O O When not using the DHCP function enter the net mask of the camera Default 255 255 255 0 es nom Default gateway When not using the DHCP function enter the default gateway of the camera DHCP Default 192 168 0 1 Select ON or OFF to determine whether or not to use the DHCP function lt Unavailable IP addresses for the default gate Default OFF way gt IP address 4 When not using the DHCP function enter the IP i n P address of the camera Do not enter the IP address man ar ee already in use for the PCs and the other network cam 107 0 A eras Default 192 168 0 10 Class D address 224 0 0 0 239 255 255 255 Class E address 240 0 0 0 255 255 255 255 39 40 HTTP port Assign the port numbers independently The following port numbers are unavailable since th
9. SD memory card tab on the Basic setup page page 16 The settings relating to the SD memory card can be configured on this page File Edit View Favorites Tools Help il aii as BT Back gt x a Ay P Search ste Favorites amp sa a i 3 Address hi ini E About SD memory card Select Use or Not use to determine whether or not to use the SD memory card Important e Before removing the SD memory card from the cam era it is necessary to select Not use first e After inserting the SD memory card it is necessary to select Use to use the SD memory card Information about SD memory card Available size and the total size of the SD memory card will be displayed Depending on the state of the SD memory card the size indications will differ as follows Indication Description No SD memory card is inserted Failed to obtain available size due to error etc The SD card memory is unfor matted or locked etc kkkkkkkk KB KB Note When the available size reached 0 KB images will not be saved on the SD memory card It is recom mended to check the available size of the SD card memory periodically Format To format the SD memory card click the Execute but ton Important Before formatting the SD memory card it is neces sary to select Use for About SD memory card on the SD memory card tab of the Basic setup page and OFF for FTP periodic transmission on the
10. and date year month day hour minute second Serial number Number of characters for the camera location 1 32 characters Transmission interval Select a transmission interval for the alarm image FTP transmission from the following 0 1 fps 0 2 fps 0 33 fps 0 5 fps 1 fps Default 1 fps Number of images Select the number of images to be transmitted from the following 10 pics 20 pics 30 pics 50 pics 100 pics 200 pics 300 pics 500 pics 1000 pics 2000 pics 3000 pics 5000 pics Default 100 pics Recording duration Approximate time to be taken to save the set number of images with the set transmission interval will be dis played Image capture size Select QVGA or VGA for the image capture size of images to be transmitted to the FTP server or of an image to be attached to the alarm mail Default VGA 29 30 Configure the settings relating to the alarm out connector Alarm output setup Click the Alarm tab on the Alarm setup page page 16 The settings relating to the alarm out connector can be configured on this page Refer to pages 29 and 30 for further information about the settings relating to the alarm image and the alarm out connector A WV NP244 Network Camera Microsoft Internet xplorer File Edit Vie il Ei E View Favorites Tools Help Q ax amp x a EA 2 Search She Favorites gA lt E eS ee 3 01 01 2005 0 00 a To FTP setup OON OFF Transmiss
11. be displayed Step 2 Enter the user name whose access level is 1 Administrator and its password Log in the camera Note The default user name with the access level 1 Administrator and its password are as follows User Name admin Password 12345 Step 3 Move the current directory to drive B and obtain images Notes e When logging in the camera the current directory will be drive D Images on the SD memory card can be found in the FTP directory under drive B Move to the FTP directory and obtain images lt Directory structure of drive B gt Directory Directory Directory year month day hour minute 050101 An image failed to transmit by the FTP 3 periodic transmission function 050102 Example img_05010101230000 jpg T The image will be saved here lt Destination of logs to be saved Example To obtain the image img_05010101230000 jpg using the Windows command prompt 1 Enter c gt ftp 192 168 0 10 and press the Enter key FTP connection will be established with 192 168 0 10 2 Log in by entering the user name and the password 3 Enter fto gt cd B FTP 050101 0123 and press the Enter key The current directory will be B FTP 050101 0123 4 Enter ftp gt bin and press the Enter key The transfer mode will be set to the binary mode 5 Enter ftp gt get img 05010101230000 jpg and press the Enter key The image will be obtained 6 Log out by entering ftp
12. gt bye and press the Enter key e It is possible to delete images on the SD memory card using the Windows command prompt etc 13 14 About the Network Security of the Camera Equipped security functions The following security functions are featured in this camera Access restrictions by the host authentication and the user authentication It is possible to restrict users from accessing the camera by setting the host authentication and or the user authentication to on 1 gt pages 35 and 36 2 Access restrictions by changing the HTTP port It is possible to prevent illegal access such as port scanning etc by changing the HTTP port number page 40 Note When failed to pass the user authentication authentication error using the same IP address PC for 8 times within 5 minutes access to the camera will be denied for a while Display the Setup Menu and Configure the Settings of the Camera using a PC The settings of the camera can be configured on the setup menu The setup menu is operable by only users whose access level is 1 Administrator How to display the setup menu Step 1 Display the Live page amp page 4 Step 2 Click the Setup button on the Live page The window with the user name and password entry fields will be displayed A WV NP244 Network Camera Microsoft Internet Explorer File Edit View Favorites Tools Help ay EE k oy gt x a Ay gt Search She Favorites
13. may be diminished even though delay time will be longer Select the interval according to the network environ ment Authentication Select an access level for audio transmission from the following Refer to page 36 for further information about the access level Level 1only Level 2 or higher All users Default All users Note Images and audio will not be synchronized Configure the multi screen settings Multi screen setup The cameras to be used for the multi screen display can be registered on this page Refer to page 16 for descriptions of how to display Multi screen setup page iv Eco 2005 01 01 0 00 A Camera 1 i D Ed SET IP address Enter the IP address or the host name of the camera to be used for the multi screen 4 cameras can be regis tered as a group and up to 2 groups 8 cameras can be registered When the HTTP port number for the camera had been changed enter as follows IP address of the camera port number for example 192 168 0 10 8080 Number of characters for the IP address 1 128 characters Note When using the host name it is necessary to con figure the DNS settings page 40 Camera title The entered camera title will be displayed on a multi screen Number of characters for the camera title 0 20 characters 2 28 Configure the alarm settings Alarm setup The settings relating to alarm occurrences such as settings f
14. occurrence notification and the VMD area settings can be configured on the Alarm setup page Refer to page 28 for further information Authentication setup button Click this button to display the Authentication setup page The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be configured on the Authentication setup page Refer to page 35 for further informa tion D Server setup button Click this button to display the Server setup page The settings relating to the mail server and the FTP server to which the camera accesses can be config ured on the Server setup page Refer to page 37 for further information 17 Network setup button Click this button to display the Network setup page The network settings and the settings relating to DDNS Dynamic DNS SNMP Simple Network management Protocol and FTP File Transfer Protocol can be configured on the Network setup page Refer to page 39 for further information EL maintenance button Click this button to display the Maintenance page System log check firmware upgrade and initializa tion of the setup menu can be performed on the Maintenance page Refer to page 45 for further information PS Help button Click this button to display the Help page 1 Status display area The name of the camera whose settings currently being configured and date and time will be dis played 2 M
15. the camera after http for example http 192 168 0 10 81 e Configure the web browser to not use the proxy server Step 3 Press the Enter key on the keyboard Click this button to display the Live page File Edit View Favorites Tools Help Q Back D a Search K Favorites amp fl S S 3 Addres ttp 192 168 0 10flivesindex html v Go Links Netw ork Carr era WV NP244 Notes e When ON is selected for User Authentication the authentication window will be displayed before dis playing live images for the user name and password entries The default user name and password are as follows User Name admin Password 12345 To enhance the security change the password for the user admin It is recommended to change this password periodically When Unicast is selected for Transmission type page 23 up to 8 users can access the camera concurrently Depending on the set values for Total bit rate and Max bit rate per 1 client the maxi mum concurrent access number may be less than 8 users When 8 users have been concurrently accessing already the access limit message will be displayed for users who accessed subsequently When ON is selected for MPEG 4 transmission page 23 MPEG 4 image will be displayed When OFF is select JPEG image will be dis played It is possible to display JPEG image even when ON is selected for MPEG 4 transmission In this case the ref
16. to be used to receive the com mand alarm Available port number 1 65535 Default 8181 Configure the settings relating to the alarm image Alarm image setup Click the Alarm tab on the Alarm setup page page 16 The settings relating to the alarm image to be transmitted to the FTP server can be configured on this page The alarm image will be transmitted to the FTP server To transmit alarm images to the FTP server it is necessary to configure the settings in advance page 38 Refer to pages 29 and 30 for further information about the settings relating to the alarm image and the alarm out connector Important Depending on the network line speed or the network traffic images may not be transmitted at the exact designated interval or period File Edit View Favorites Tools Help Q px zi W x a 2 Search She Favorites amp Ar Se G 3 3 Address http min index htmil Alarm image FTP transmission Select ON or OFF to determine whether or not to transmit the alarm image to the FTP server Default OFF Directory Enter the directory name where the alarm images are to be saved For example enter ALARM to designate the directory ALARM under the FTP root directory Number of characters for the directory name 0 256 characters File name Enter the file name used for the alarm image to be transmitted to the FTP server The file name will be as follows Entered file name Time
17. white balance adjustment method from the following AUTO Adjusts the white balance automatically HOLD Fixes to the white balance applied when the SET button is clicked Default AUTO Aperture level 9 steps 4 4 are available for aperture level sharp ness 4 is the softest and 4 is the sharpest Default 0 Flicker less mode Select ON or OFF to determine whether or not to use the flicker less mode Normally select OFF When using the camera under fluorescent lamps and flickers appear select ON Default OFF Sensitivity up Select the sensitivity from the following OFF Does not use the sensitivity adjustment x2 Adjusts the sensitivity up to x2 automatically x4 Adjusts the sensitivity up to x4 automatically x8 Adjusts the sensitivity up to x8 automatically x16 Adjusts the sensitivity up to x16 automatically Default OFF Important When the sensitivity is incremented the refresh interval may be longer Backlight compensation BLC Select ON or OFF to determine whether or not to compensate backlight ON Compensates backlight Suitable when the subject has backlight OFF Does not compensate backlight Suitable when the subject has light in the front Default OFF Light control ALC ELC Select ALC or ELC for light control according to the lens in use ALC Select this when an auto iris lens DC is in use ELC Select this when a fixed iris l
18. 1 when completing the setting items in field B ink Access LED ONn OOFF Alarm setup Authentication setup Server setup Network setup Maintenance Help Done Internet Step 1 Click the desired button in the frame on the left of the window to display the respective setup menu When there are tabs at the top of the setup page dis played in the frame on the right of the window click the desired tab to display and configure the setting items relating to the name of the tab Step 2 Complete each setting item displayed in the frame on the right of the window Step 3 After completing each setting item click the SET but ton to apply them Important When there are two SET buttons or REG but tons or more on the page click the respective but ton to the edited setting item lt Example gt 16 About the operation window 4 WV NP244 Network Camera Microsoft Internet Explorer File Edit View Favorites Tools Help Q sex Q x B A K Search JE Favortes g2 B ee Address http 4 192 168 0 10 admin index html Network Camera WV_NP24 WV NP244 1 Live button Live ESG Camera title 2 Basic setup button Setup menu Time amp date 3 Camera setup button Camera setup 4 Multi screen setup button n Linkf Access LED Alarm setup 5 Alarm setup button Authentication setup 6 Authentication setup button
19. 8 Configure the settings relating to the FTP server FTP Click the FTP tab on the Server setup page page 16 The settings relating to the FTP server used to transmit the alarm images can be configured on this page FTP server address Enter the IP address or the host name of the FTP serv er Number of characters for the FTP server address 1 128 characters Important When entering the host name for FTP server address it is necessary to configure the DNS set tings on the Network tab of the Network setup page page 40 User name Enter the user name login name to access the FTP server Number of characters for the user name 1 32 char acters Password Enter the password to access the FTP server Number of characters for the password 0 32 char acters Control port Enter a control port number to be used for the FTP serv er Available port number 1 65535 Default 21 FTP mode Select Passive or Active for the FTP mode Normally select Passive When failed to establish the connection select Active Default Passive Configuring the network settings Network setup The network settings and the settings relating to DDNS Dynamic DNS and SNMP Simple Network management Protocol can be configured on this page The Network setup page has 3 tabs of the Network tab the DDNS tab the SNMP tab and the FTP tab Configure the network settings Network
20. Configure the settings relating to the user authentication User Click the User tab on the Authentication setup page page 16 The settings relating to the user authentication can be configured on this page Up to 16 users can be registered See Access level O O BO Se he eee sarai Select the access level of the host from the following OS SE Link 2005 01 01 0 00 1 Administrator Allowed all available operations of the camera 2 Camera control Allowed to display images from the camera and to control the camera The camera set r ting configuration is unavailable 3 Live only Only displaying live images is available Access 1 Administrator 2 Camera contro 3 Live only The camera setting configuration and camera con trol are unavailable Default 3 Live only ia FEA Note By clicking of User name check the registered user can be selected and the selected user s infor User authentication mation can be checked Select ON or OFF to determine whether or not to The registered user will be displayed with the access authenticate the user level Example admin 1 Default OFF To delete the registered user click the DEL button after selecting the user to be deleted User name Enter a user name Important Number of characters for the user name 1 32 char If all users whose access level is 1 Administrator acters is deleted it will be impossible to configure the set Defa
21. Help Z WY NP244 Network Camera Microsoft Internet Explorer File Edit Yiew Favorites Tools Help aw Q x Q x a O r Search Sie Favortes amp B Q 2 E 3 Q px Q x a O j Search Sip Favorites B d E 33 Address http 192 168 0 10 adminjindex html v SE Links Address http 192 168 0 10 admin index html SE Links i 2005 01101 0 00 WV_NP244 2005101101 0 00 A Network Camera WV NP244 WV NP244 Live Omon OTue Owed OTh Ofri O E 3 7 Sch Live JMon O 24hours 06 00 Schedule Mon OTue at CIFri l 24 hours Setup menu Thu IEN s Mon OTue Owed Othu Cri Basic setup Schedule 3 w J F 24 hours 00 00 x 00 i 00 v Schedule 2 Setup menu Wed OThu CIFri Basic setup Schedule 3 3 gt 24 hours 00 iM 00 00 wp 00 Camera setup Camera setup Mult screen setup Mult screen setup Alarm setup Alarm setup 0 00 Authentication setup Authentication setup Server setup Server setup Internet Done Internet Step 1 Step 1 Check the check box of the desired day of the week Uncheck the check box of the set day of the week The selected day of the week will be validated for the schedule Step 2 Click the SET button after completing the settings Step 2 The result will be displayed at the bottom of the win
22. NTP succeeded Description e The designated IP address of the DDNS may be incorrect Check if the DDNS set tings are configured correctly e The DDNS server may be down Ask the network administrator Entered user name or password may be incorrect Check if the DDNS settings are configured correctly IP address update error occurred in the DDNS server Ask the network administrator An error occurred in the DDNS function Check if the DDNS settings are configured correctly Description e The IP address of the server may be incorrect Check if the IP address of the server is configured correctly e The NTP server may be down Ask the network administrator e The designated IP address of the NTP server may be incorrect Check if the NTP server settings are configured correctly e The NTP server may be down Ask the network administrator Time correction succeeded 49 Troubleshooting Before asking for repairs check the symptoms with the following table Contact your dealer if a problem cannot be solved even after checking and trying the solution or if the problem is not described below Cees ee e Is the LAN cable category 5 is firmly connected to Operating the network connector on the rear of the camera instructions book e Is the link LED right by the network connector lit When it is not lit connection to a LAN may not be Operating established or a network may be not working correct instructions
23. Panasonic Network camera Operating Instructions Model No WV N P244 Lens is option Before attempting to connect or operate this product please read these instructions carefully and save this manual for future use CONTENTS OTAGO asic noida ea hoai ne yest ich vost harcd E A atheism aaa E 3 About these operating instructions cccccccccceeeeeeeseeeeeeeeaseeeeesaeeeeeesseeeeeeeseeeeessaeeees 3 Trademarks and registered trademarks cccecccccseeeeeeceeeeceeecaeeeeeeeseeeeeessesseeessaaeeees 3 Monitor Images On a PC isrcadiee Sekt acti dc a a 4 Monitor images from a single camera cccccceececcaeeeeeaeeeeceeueeeeseeeessaeeeesenseesaeeeesseeeeeas 4 Monitor images from Multiple cameras ccecccccseceecceeeeceeeeeeeseecseeeeeeeeeeeeeeeeensgeeens 9 AGHOM alan Alani OCCUMCNCE sis dni 25th dois ane ois stn a E aA a e 10 TLransmitlmages Onto an FIP SENEI aversion ecient a cael N ee es 11 Transmit an alarm image at an alarm occurrence Alarm image FTP transmission 11 Transmit images at a designated interval or period FTP periodic transmission 11 Save images on the SD memory card when failed to transmit images by the FTP periodic transmission function cccccccseeeeeeceeeeeeeeeeeeeeeeceeeeceesaeeeeeessaaeeeeeeseeeeeeas 12 About the Network Security Of the Camera cceeccccccceeseeeeeeeeeeseeeeeeeeeseeeaeeeeeeessaeeeeees 14 Equipped security TUMGCHONS crise cereieteccats Meare
24. The designated IP address of the DNS Connot connect to SMTP server may be incorrect Check if the DNS set tings are configured correctly e The DNS server may be down Ask the network administrator Connot connect to SMTP server The IP address of the server may be Other error Error indications relating to FTP Category FTP server error Connection error Internal error 48 Content Connection error to DNS server Connot connect to FTP server File transfer error Passive mode error Log out failed Directory change failed User name and password isn t correct Other error incorrect Check if the IP address of the server is configured correctly e The SMTP server may be down Ask the network administrator An error occurred in the mail function Check if the mail settings are configured correctly Description The FTP server or DNS server may be down e The FTP server settings may be incor rect e The settings relating to the indicated item may be incorrect The FTP server settings may be incorrect Error indications relating to DDNS Category Content Connection error Cannot connect to DDNS server User name or password isn t correct IP address updated failed Internal error Other error Error indications relating to NTP Category Content Connection error Cannot connect to NTP server Internal error Other error Time adjustment Succeeded in the update NTP synchronizing with
25. address is between 192 168 0 0 192 168 0 255 can access the camera with the access level 2 Camera control When the IP address already in use is entered and the REG button is clicked the respective host infor mation will be overwritten Access level Select the access level of the host from the following 1 Administrator 2 Camera control 3 Live only Refer to page 35 for further information about the access level Default 3 Live only Note e By clicking V of Host check the registered host can be selected and the selected host s IP address can be checked The registered IP address will be displayed with the access level Example 192 168 0 21 1 To delete the registered host click the DEL button after selecting the IP address to be deleted Configure the settings of the servers Server setup The settings relating to the mail server and the FTP server can be configured on this page The Server setup page has 2 tabs of the Mail tab and the FTP tab Configure the settings relating to the mail server Mail Click the Mail tab on the Server setup page page 16 The settings relating to the mail server used to send the alarm mail can be configured on this page File Edit View Favorites Tools Help Q ex amp x a Ay yp Search she Favorites CE s he a 33 Adc infi ERE 2005 01 01 0 00 O POP before SMTP OSMTP SMTP server address Enter the IP address or the hos
26. ages and audio will be transmitted to the designated IP address Available address 224 0 0 0 239 255 255 255 Default 239 192 0 20 23 24 Multicast port Enter the multicast port number used to transmit MPEG 4 images from the camera Available port number 1024 50000 Only even num bers are available Default 37004 Multicast TTL Enter the multicast TTL value Available value 1 254 Default 16 Important e Depending on the PC in use for monitoring the mul ticast port number may be already in use In this case it may be impossible to monitor images Change the multicast port number e When transmitting MPEG 4 image via a network the transmitted image sometimes may not be displayed In this case refer to the network administrator e When two network interface cards or more are installed on the PC in use the network interface card s not used for receiving images should be invalidated when displaying MPEG 4 images using the multicast port Configure the camera settings such as image quality and brightness etc Camera Click the Camera tab on the Camera setup page page 16 The following are descriptions of how to configure the settings relating to images such as brightness etc a Eds ins 2005 01 01 0 00 amera Brightness 17 steps 8 8 are available for brightness 8 is the darkest and 8 is the brightest Default 0 White balance Select the
27. ain area Pages of each setup menu will be displayed There are tabs for some setup menus Configure the basic settings of the camera Basic setup The basic settings such as time and date and camera name and the settings relating to the NTP server and the SD memory card can be configured on the Basic setup page The Basic setup page has 3 tabs of the Basic tab the NTP tab and the SD memory card tab Configure the basic settings Basic Click the Basic tab on the Basic setup page page 16 The settings such as the camera name time and date etc can be configured on this page Date time display format Select a date time display format When 04 01 2005 13 10 00 is set for Time and date setup after selecting 24 hours for Time display time and date will be displayed as follows respectively DD MM YYYY 01 04 2005 13 10 MM DD YYYY 04 01 2005 13 10 DD Mmm YYYY 01 Apr 2005 13 10 YYYY MM DD 2005 04 01 13 10 Mmm DD YYYY Apr 01 2005 13 10 Camera title Default MM DD YYYY Enter the title of the camera Click the SET button after entering the title of the camera The entered title will be Daylight saving Summertime displayed in the status display area Select ON or OFF to determine whether or not to Number of characters for the camera title 0 20 apply daylight saving time Select ON or OFF to characters determine whether or not to apply daylight saving time Default WV NP244 ON Applies s
28. aintenance System log check firmware upgrade and initialization of the setup menu can be performed on this page The Maintenance page has 3 tabs of the System log tab the Upgrade tab and the Initialization tab Check the system log System log Click the System log tab of the Maintenance page page 16 Up to 4000 system logs can be saved on the SD memory card when the SD memory card is inserted after selecting Use for About the SD memory card on the SD memory card tab page 21 When Not use is selected for About the SD memory card up to 100 system logs can be saved on the built in memory of the camera When the saved system logs reached the maximum number the older system logs will be overwritten by the newer logs In this case the oldest log is the first to be overwritten The system logs will be displayed in 100 logs each When using the SD memory card the logs will be saved even when the power of the camera is turned off When not using the SD memory card the logs will be deleted when the power of the camera is turned off E Eao Links 2005 01101 0 00 Time amp date Time and date at the error occurrence will be displayed Error message The descriptions about the error will be displayed Refer to page 48 for further information about the sys tem logs 45 Upgrade the firmware Upgrade Click the Upgrade tab of the Maintenance page page 16 The current firmware can
29. be checked and upgraded to the latest version on this page Contact the dealer for further information about the firmware upgrade _ yB Links 2005 01 01 0 00 WV NP244 00 80 45 0D 12 34 L Browse Reset to the default settings after completing the upgrade Except the network settings ODo not reset the settings after completing the upgrade It wil take for around 4 minutes with resetting the settings or for around 3 minutes without resetting the settings to complete the upgrade Please wait for a while Please do not operate the browser in the process of the upgrade Model No MAC address Firmware version IPL version Information of each item will be displayed How to upgrade the firmware Step 1 Contact the dealer and download the latest firmware onto a PC Step 2 Click the Browse button and designate the down loaded firmware Step 3 Click the radio button respective to the desired option to determine whether or not to initialize the settings after the firmware upgrade Note Read the readme file provided with the firmware first and determine whether or not to initialize the settings after the firmware upgrade 46 Step 4 Click the Upgrade button The confirmation window will be displayed When Do not reset the settings after completing the upgrade was selected the confirmation window will not be displayed Important e Upgrade the firmwa
30. button is clicked the button will turn into the button and audio will not be heard When this button is clicked the button will turn into the button and audio will be heard The Audio button will be displayed only when ON is selected for Mic mode on the setup menu page 26 When this button is clicked a new window will open and the still picture one shot displayed on the Live page will be dis played on it To save this picture on a PC right click on the image and select Save on the displayed pop up menu Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi screen Images from up to 4 cameras can be displayed simultaneously To display images on a multi screen it is necessary to register cameras in advance 4 cameras can be registered as a group and up to 2 groups 8 cameras can be registered page 27 Important e Select OFF for both the user authentication and the host authentication of the camera to be registered pages 35 and 36 e Only JPEG images can be displayed on a multi screen Audio will not be heard Step 1 Click the Multi screen button Images from the registered cameras will be displayed on a 4 split screen To display images on a single screen click the the 1 button or Live button 2 Click a camera name Live images from the camera corresponding to the clicked camera name will be displayed on the Live page of the newly open
31. e Is the power of the camera on Check if the power of the camera is turned on e Is the viewer software installed on a PC Install the viewer software on a PC e Is the lens cap detached Check if the lens cap is detached e Aren t there dusts or dirt on the lens Check if there are dust or dirt on the lens e Is the focus adjusted correctly Check if the focus is adjusted correctly e Depending on the version of your browser there might be difficulties refreshing the picture and operat ing the camera It is recommended to use Internet Explorer 6 0 SP2 e Depending on the traffic of the network or the concen tration of access to the camera there might be diffi culties displaying the camera picture Click the reload button of the browser to request the camera picture to be refreshed Reference pages Operating instructions book Operating instructions book Operating instructions book Operating instructions book 51 92 When displaying MPEG4 images on two browser win dows or more images from two cameras or more are displayed in sequence on a single browser window Reference Cause solution pages e This may occur due to the display adapter and driver combination When this occurred update the driver of the display adapter to the latest version first If updating the driver does not solve the problem adjust the hardware acceleration as follows 1 Right click on the desktop and s
32. e file to be trans mitted and select the naming option from the following With time and date File name will be Entered file name Time and date year month day hour minute second Serial number Without time and date File name will be the charac ters entered for File name only When Without time and date is selected the file will be overwritten each time a file is transmitted newly Number of characters for the file name 1 32 char acters Default blank Interval Select the interval for the FTP periodic transmission from the following 1 sec 2 sec 3 sec 4 sec 5 sec 6 sec 10 sec 15 sec 20 sec 30 sec 1 min 2 min 3 min 4 min 5 min 6 min 10 min 15 min 20 min 30 min 1 hour 1 5 hours 2 hours 3 hours 4 hours 6 hours 12 hours 24 hours Default 1 sec Image capture size Select QVGA or VGA for the image capture size of the images to be transmitted by the FTP periodic trans mission Default VGA 43 Configure the schedule settings of the FTP periodic transmission Schedule setup Click the FTP tab on the Network setup page page 16 The schedule settings of the FTP periodic transmission can be configured on this page Refer to page 43 for further information about the settings relating to the FTP periodic transmission How to configure the schedule settings How to delete the set schedule Z WV NP244 Network Camera Microsoft Internet Explorer Rad File Edit View Favorites Tools
33. eas can be set on this page When a motion is detected in the set area the alarm action will be performed Set the VMD areas Step 1 Set the video motion detection area by dragging the mouse on the screen When the All areas button is clicked the whole area will become the VMD area and 1 White will be automatically applied to Area The designated area will become the VMD area and the outline will be displayed When 2 4 VMD areas are set each area will be numbered in order The areas will be identified by the respective outline colors A WV NP244 Network Camera Microso i File Edit View Favorites Tools Help Kae O d a G Psn grons O B Sa BS ss http 192 168 0 10 admin index html E co ft Internet Explorer ay WV NP244 Mult screen setup Authentication setup Server setup Network setup Maintenance Help Done Internet Step 2 Select ON or OFF for Status of each VMD area When the SET button is clicked after selecting OFF the outline will become the broken line and no alarm action will be performed even when a motion is detected In the area Z WY NP244 Network Camera Microso Eile Edit View Favorites Tools Help Q ax P x a O gt Search Sip Favorites amp B 2 E 3 Address a http 192 168 0 10 admin index html Go WV NP244 01 01 2005 0 00 ft Internet Explorer Network Camera WV NP244 Live Alarm VMD area Set
34. ed window x Go Links 2005 01 01 0 00 Downloading picture http 192 168 0 11 cgi bin camera resolution 320 10 Action at an Alarm Occurrence The alarm action will be performed when the following alarm occur Alarm type Terminal alarm When connecting an alarm device such as a sensor to the alarm connector on the rear of the camera the alarm action will be performed when the connected alarm device activated VMD alarm When a motion is detected in the set VMD area the alarm action will be performed VMD stands for Video Motion Detection Command alarm When received Panasonic alarm protocol from the connected device via a network the alarm action will be performed Action at an Alarm Occurrence Display the Alarm occurrence indication button on the Live page page 7 The Alarm occurrence indication button will be displayed on the Live page at an alarm occurrence Note The Alarm occurrence indication button will be refreshed in 30 seconds intervals For this reason it may take a maximum of 30 seconds until the Alarm occurrence indication button is displayed on the Live page at an alarm occurrence Notify of alarm occurrences to the device connected to the alarm connector It is possible to output signals from the alarm connector on the rear of the camera and sound the buzzer when an alarm occurs The settings for the alarm output can be configured on the Alarm tab of the Alarm setup
35. ed on a multi screen by registering cameras on the setup menu page 9 The letters MPEG 4 on the button will turn green and MPEG 4 image will be displayed When OFF is selected for MPEG 4 transmission on the setup menu the MPEG 4 button will not be displayed page 23 The letters JPEG on the button will turn green and JPEG image will be displayed The letters VGA on the button will turn green and images will be displayed in VGA size The letters QVGA on the button will turn green and images will be displayed in QVGA size The image capture size can be changed only when display ing JPEG image The zoomed image will return to the original size Image dis played in the original size cannot be zoomed out The zoomed image will return to the original size The displayed image will be zoomed in The displayed image will be darker Image will be displayed with the default brightness 0 page 25 The displayed image will be brighter The AUX connector will open The AUX connector will close Operation Acknowledge alarm occur rences 2 Turn on off audio 3 Display a still picture one shot Description This button will be displayed and will blink when an alarm occurred When the button is clicked the button will disap pear When Latch is selected for Alarm output setup the alarm output connector will be reset by clicking this button page 30 When this
36. elect Properties from the displayed pop up menu 2 Select Settings from Display Properties and then click the Advanced button 3 Click the Troubleshoot tab and disable the DirectDraw acceleration by adjusting the level of Hardware acceleration General Adapter Monitor Troubleshoot Color Management al Are you having probleme with your graphics hardware These settings can help vou troubleshoot dizplay related problems Hardware acceleration Manually control the level of acceleration and performance supplied by your graphics hardware Use the Display Troubles rho assist you in making the change Hardware acceleration None Full Disable all DirectDraw and Direct3D accelerations as well as all cursor and advanced drawing accelerations Use this setting to corect severe problems with Directs accelerated applications Enable write combining When using a PC on which Windows XP Service Pack2 SP2 is installed The following may occur during operation when using a PC on which Windows XP Service Pack2 SP2 is installed Follow the instructions below when the following occurred By performing the following solutions other applications and the security level may not be affected The Information Bar expressed in the following symptom and solutions will be displayed just below the address bar only when there is information to communicate Z index Microsoft Internet Explorer File Edit V
37. ens is in use Default ALC Important e When ELC is selected ON for Flicker less mode will be unavailable e DC video servo type lenses are not supported e When ON is selected for Flicker less mode sen sitivity may be decremented 20 26 Configure the settings relating to audio Audio Click the Audio tab on the Camera setup page page 16 The settings relating to audio can be configured on this page File Edit View Favorites Tools Help i C3 bp Q sxx amp a EA gt Search She Favorites kS Se es 33 Address http 1 inji E Mic mode Select ON or OFF to determine whether to turn on or off audio on a PC ON Transmits audio from the camera to the PC Audio can be heard with images on the PC Images and audio will not be synchronized OFF Does not transmit audio from the camera to the PC Therefore no settings and controls relating audio will be invalidated Default ON Audio bit rate Select 16 kbps or 32 kbps for audio bit rate Default 32 kbps Audio sensitivity Select the sensitivity of the built in microphone of the camera from the following Low Middle High Default Middle Transmission interval Select an interval for audio transmission from the follow ings 20 msec 40 msec 80 msec 160 msec Default 40 msec Note When a shorter interval is selected delay time will be shorter When a longer interval is selected audio interruption
38. er to page 23 for further information about the settings relating to MPEG 4 images Refresh interval JPEG Select an interval to refresh the displayed JPEG image from the following 0 1 fos 0 2 fos 0 33 fos 0 5 fos 1 fos 2 fps 3 fps 5 fps 6 fps 10 fps 15 fps 30 fps Default 5 fps Note When ON is selected for MPEG 4 transmission the refresh intervals may be longer than the set value when the setting value with an asterisk on the right is selected Image capture size Select QVGA or VGA for the image capture size of MPEG 4 images Default VGA Image quality Select image quality for JPEG images from the follow ing O Super fine 1 Fine 2 3 4 5 Normal 6 7 8 9 Low Default 5 Normal Configure the settings relating to MPEG 4 image JPEG MPEG 4 Click the JPEG MPEG 4 tab on the Camera setup page page 16 Configure the settings such as Refresh interval MPEG 4 Image capture size and Image quality on this page Refer to page 22 for further information about the settings relating to JPEG images MPEG 4 transmission Select ON or OFF to determine whether or not to transmit MPEG 4 images ON Transmits MPEG 4 images OFF Does not transmit MPEG 4 images Default ON Note When ON is selected for MPEG 4 transmission displaying rather of MPEG 4 image or JPEG image will be available However the refresh interval JPEG may be longer than the set value when d
39. ey are already in use Available port number 1 65535 Default 80 lt Port numbers already in use gt 20 21 23 25 42 53 67 68 69 110 123 161 162 995 10669 10670 DNS Select AUTO or MANUAL to determine whether or not to use the DNS When MANUAL is selected it is necessary to configure the settings for the DNS When using the DHCP function it is possible to obtain the DNS address automatically by selecting AUTO Refer to the network administrator for further information about the settings Default MANUAL Primary DNS Secondary DNS When MANUAL is selected for DNS enter the IP address of the DNS Refer to the network administrator about the IP address of the DNS Line speed Select the line speed for data transmission from the fol lowings It is recommended to use with the default set ting AUTO AUTO 100 MF Mbps full duplex 100 MH Mbps half duplex 10 MF Mbps full duplex 10 MH Mbps half duplex Default AUTO FTP access Select Allow or Forbid to determine whether to allow or forbid the FTP access Default Allow Total bit rate Select the total bit rate for data transmission from the followings 64 kbps 128 kops 256 kbps 512 kbps 1024 kbps 1536 kbps 2048 kbps 3072 kbps 4096 kbps Unlimited Default Unlimited Notes e When selecting 64 kbps select OFF for Mic mode on the Audio tab page 26 e When 64 kbps is selected it is impossible to car
40. g to DDNS can be configured on this page When accessing the camera via the Internet from the network environment of which the global IP address is obtained using DHCP the DDNS function is necessary When using the DDNS function it is possible to access with Host name registered in the DDNS server nmdns net To use the DDNS function it is necessary to connect to the dedicated DDNS server Refer to the web site for further information about the DDNS Refer to the Readme file about the web site It is necessary to configure the host name user name and password registered in the DDNS server 24 WV NP 244 Network Camera Microsoft Internet Explorer DDNS the DDNS function Default OFF Host name acters Select ON or OFF to determine whether or not to use Enter the host name to be used Number of characters for the host name 1 64 char 41 42 User name Enter the user name login name to access the DDNS server Number of characters for the user name 1 32 char acters Password Enter the password to access the DDNS server Number of characters for the password 0 32 char acters Access interval Select the interval to access the DDNS server to check the IP address and the host name from the following 1 min 10 min 30 min 1 hour 6 hours 24 hours Default 1 hour Configure the settings relating to SNMP SNMP Click the SNMP tab on the Network setup page page 16 The sett
41. he FTP server in advance page 38 Refer to page 44 for descriptions of how to configure schedules of image transmission Important e Depending on the network line speed or the network traffic images may not be transmitted at the exact designat ed interval or period e When ON is selected for both of the alarm image FTP transmission function and the FTP periodic transmission function the alarm image FTP transmission function will be given priority over the FTP periodic transmission function For this reason images may not be transmitted at the exact designated interval or period if alarms occur frequently Note Images failed to transmit by the FTP periodic transmission can be saved automatically on the SD memory card page 21 Address http 192 168 0 10 adminjindex html Eco ink a 2005 01 01 0 00 A FTP periodic transmission Select ON or OFF to determine whether or not to transmit images using the FTP periodic transmission function When ON is selected it is necessary to configure the settings of the FTP server page 38 Default OFF Directory Enter the directory name where the images are to be saved For example enter img to designate the directory img under the FTP root directory Number of characters for the directory name 0 256 characters Default blank File name Enter the file name name of the imag
42. iew Favorites Tools Help ae x a e p Search e Favorites 04 gt ee 38 Address 2 http 192 168 0 100 Eco Links S Pop up blocked To see this pop up or additional options click here x lt q Information Bar Reference Symptom Solutions pages The following message is Click the information bar and select Always Allow Pop displayed on the information ups from This Site The disalog window saying Allow bar pop ups from this site will be displayed Click the Yes Pop up blocked To see button this pop up or additional options click here Click Internet Options on the Tools menu of Internet Explorer and then click the Security tab Then click the Custom Level button to open the Security Setting window Under Miscellaneous select Enable for Allow script initiated windows without size or position constraints Click the OK button The Warning window will be displayed Click the Yes button Unnecessary status bar or scroll bar is displayed on the pop up window 93 Panasonic System Solutions Company Unit Company of Panasonic Corporation of North America Security Systems www panasonic com security For customer support call 1 877 733 3689 Executive Office Three Panasonic Way 2H 2 Secaucus New Jersey 07094 Zone Office Eastern Three Panasonic Way Secaucus New Jersey 07094 Central 1707 N Randal Road Elgin IL 60123 Southern 1225 Northbrook Parkway Suwanee GA 30024
43. ings relating to SNMP can be configured on this page It is possible to check the status of the camera by connecting to the SNMP manager When using the SNMP function contact the network administrator Community name Enter the community name to be monitored Number of characters for the community name 0 32 characters Default blank Important When using the SNMP function it is necessary to enter the community name When no community name is entered the SNMP function will not work Camera title Enter a camera title to be used to manage the camera with the SNMP function Number of characters for the camera title 0 32 characters Default blank Camera location Enter the name of the location where the camera is installed Number of characters for the camera location 0 32 characters Default blank Contact Destination address or phone number of manager Enter the mail address or the phone number of the SNMP manager Number of characters for the destination address or the phone number of manager 0 255 characters Default blank Configure the settings relating to the FTP periodic transmission FTP periodic transmission Click the FTP tab on the Network setup page page 16 The settings relating to the periodic transmission of images to an FTP server can be configured on this page To transmit images to an FTP server periodically it is necessary to configure the settings of t
44. ion interval Number of images Re vaa x OON atc Pulse Open Close sec cording duration 100sec OFF Alarm output setup Select ON or OFF to determine whether or not to output the alarm signals to the alarm out connector when an alarm is detected Default OFF External terminal output setup Select Latch or Pulse for the alarm out connector at an alarm occurrence Latch When an alarm is detected alarm output con nector will be in the state selected for Alarm output until the Alarm reset button is clicked Pulse When an alarm is detected alarm output con nector will be in the opposite state to the Alarm out put setting for the period set for Pulse width Default Latch Alarm Output Select Open or Close to determine whether to open or close the alarm output connector when output the alarm signals Open The alarm out connector will open when output the alarm signals Normally close Close The alarm out connector will close when output the alarm signals Normally open Default Open Note When Open is selected the alarm signal will be output for around 20 seconds when the power of the camera is turned on Pulse width When Pulse is selected for Alarm output select an pulse width Available pulse width 1 120 sec Default 1 sec Set the VMD areas VMD area Click the VMD area tab on the Alarm setup page page 16 The video motion detection ar
45. is playing JPEG images Max bit rate per 1 client Select a MPEG 4 bit rate per a client from the following 64 kbps 128 kbps 256 kbps 512 kbps 1024 kbps 1536 kbps 2048 kbps 3072 kbps 4096 kbps Default 2048 kbps Note The MPEG 4 bit rate is synchronized with Total bit rate on the Network tab of Network setup page page 39 For this reason the bit rate may be lower than the value when the setting value with an asterisk on the right is selected Image capture size Select QVGA or VGA for the image capture size of MPEG 4 images Default VGA Image quality Select image quality of MPEG 4 images from the follow ing Fine Normal Low Default Normal Refresh interval MPEG 4 Select an interval 1 5 seconds to refresh the dis played MPEG 4 images If using under the network environment with frequent error occurrences shorten the refresh interval for MPEG 4 to diminish image distortions However the refresh interval MPEG 4 may be longer than the set value when displaying JPEG images Default 3 sec Transmission type Select a MPEG 4 transmission type from the following Unicast Up to 8 users can access a single camera concurrently Multicast No concurrent access limitation for a cam era Note Refer to page 4 for further information about the maximum concurrent access number Default Unicast Multicast address Enter the multicast IP address Im
46. l can be configured on this page To notify of an alarm occurrence by e mail it is necessary to configure the settings of the mail server page 37 Mail body Enter the mail body Number of characters for the mail body 0 200 char acters E mail notification Select ON or OFF to determine whether or not to notify of an alarm occurrence by e mail at an alarm occurrence Default OFF Attach image Select ON or OFF to determine whether or not to attach an image to the mail to be sent Default OFF Note The settings for Image capture size of Alarm image setup on the Alarm tab page 29 will be applied to the size of the image to be attached Address Enter the destination mail address Up to 4 destination addresses can be registered To notify by e mail check the Notification setup check box respective to the desired address To delete the registered address click the DEL button respective to the desired address Number of characters for the destination mail address 3 128 characters Mail subject Enter the mail subject Number of characters for the mail subject 0 50 characters 33 Configure the settings relating to Panasonic alarm protocol Panasonic alarm protocol Click the Notification tab on the Alarm setup page page 16 The settings relating to Panasonic alarm protocol can be configured on this page e File Edit View Fa
47. ly Check if the cables have any contact failure or if book the wiring is correct or not e Are the set IP addresses valid 36 39 e Are you accessing the wrong IP address Check the connection as follows With the Windows command prompt gt ping IP address set for the camera When the WV NP244 replies the camera is function ing normally If not restart the WV NP244 and proceed as follows 1 Change the IP address by using the Panasonic IP Setup software 2 Initialize the camera by pressing the INITIAL SET button on the rear of the camera The IP address will return to the default setting 192 168 0 10 Cannot access from the browser Is the same IP address provided to other devices Are there contradictions between the address and the network subnet to be accessed lt When the camera and the PC are connected in the same subnet gt Are the IP addresses of the camera and the PC set in a common subnet Or is Use Proxy Server for the settings of the browser checked When accessing the camera in the same subnet it is recommended to enter the address of the camera in the Don t Use Proxy For These Addresses box lt When the camera and the PC are connected in the different subnet gt Is the IP address of the default gateway set for the camera correct Cannot access from the browser No image is displayed Images are displayed blurry The image is not being refreshed Cause solution
48. ools Help x gt r 2 Q sxx Q x B A 2 Search JE Favorites amp BS Se A 3 Address a https 1 i 2005101101 0 00 O Synchronization with NTP 1 65535 Time adjustment Select the time adjustment method from the following Time adjusted by the selected method will be used as the standard time of the camera Manual setup Time set on the Basic tab on the Basic setup page will be used as the standard time of the camera Synchronization with NTP server Time automatically adjusted by synchronizing with NTP server will be used as the standard time of the camera Default Manual setup NTP server address Enter the IP address or the host name of the NTP serv er Number of characters for the NTP server address 1 128 characters Default blank Important When entering the host name for NTP server address it is necessary to configure the DNS set tings on the Network tab of the Network setup page page 39 NTP port Enter a port number to be used for the NTP server Available port number 1 65535 Default 123 Synchronization interval Select an interval 1 24 hours in 1 hour intervals of synchronization with the NTP server Default 1 hour Time zone Select a time zone according to the location where the camera Is in use Default GMT Greenwich Mean Time Dublin Edinburgh Lisbon London Configure the settings relating to SD memory card SD memory card Click the
49. or the alarm action at an alarm occurrence the alarm occurrence notification and the VMD area settings can be configured on this page The Alarm setup page has 3 tabs of the Alarm tab the VMD area tab and the Notification tab Configure the settings relating to the alarm action Alarm Click the Alarm tab on the Alarm setup page page 16 The settings relating to the alarm action can be configured on this page Refer to pages 29 and 30 for further infor mation about the settings relating to the alarm image and the alarm out connector A WY NP244 Network Camera Microsoft Internet xplorer File Edit View il Eil Ec Vi Favorites Tools Hel Q sxx Q x E EA Search She Favorites g lt D 2 Ta 3 Address http 192 168 0 10 adminjindex html WV NP244 FTP transmission Terminal alarm Select ON or OFF to determine whether or not to receive the terminal alarm Default OFF VMD alarm Select ON or OFF to determine whether or not to perform the alarm action using the VMD function Refer to page 31 for descriptions of how to set the VMD areas Default OFF Command alarm Select ON or OFF to determine whether or not to receive the command alarm The command alarm is the function that notifies of Panasonic protocol alarm from the other cameras When ON is selected alarm actions will be performed between multiple cameras Default OFF Originating port number Select a port number
50. re using a PC in the same sub net as of the camera s e Follow the instruction of the dealer when upgrading the firmware e Use the designated file extension img for the firmware upgrade e The name of the firmware to be used for upgrade should be firmware img e Do not turn the power of the camera off in the process of upgrade e Do not operate the web browser including adjusting the window size in the process of upgrade e The following network settings will not be initialized when upgrade the firmware after selecting Reset to the default setting after completing the upgrade Except the network settings IP address net mask default gateway HTTP port ON OFF settings for DHCP AUTO MANUAL set tings for DNS DNS primary and secondary address line speed total bit rate Initialize restart the camera Initialization Click the Initialization tab of the Maintenance page page 16 Initialization of the setup data and HTML files of the camera and restarting of the camera can be performed on this page Z Go 2005 01 01 0 00 Initialize setup data Click the Execute button to reset the settings to the default settings However the network settings will not be reset It is impossible to operate the camera for around 1 minute after the initialization Initialize HTML data Click the Execute button to reset the HTML files to the default settings It is impossible to operate the camera for a
51. resh interval will be limited lt Refresh interval JPEG gt When ON is selected for MPEG 4 transmission JPEG VGA 5 fps JPEG QVGA 10 fps When OFF is selected for MPEG 4 transmission JPEG QVGA or QVGA 30 fps The refresh interval may be longer depending on a network environment PC spec photographic sub ject access traffic etc Important When displaying multiple MPEG 4 images on a PC images may not be displayed depending on the per formance of the PC Refer to the following page for further information about the Live page About the Live page Camera name Z WV NP244 Network Camera Microsoft Internet Explorer File Edit View Favorites Tools Help Q sax amp a A JO search Shere orites L B o Ee Network Camera WV NP244 WV NP244 1 Live button 2 Setup button 3 Multi screen buttons man ge age type MPEG 4 4 Image type buttons Image capture size buttons Sse Zoom buttons a Brightness buttons AUX buttons mery amn Alarm occurrence indication button i Audio button fe x 2 One shot button ER See EEE v Ejco Links gt I Ed E 2005101101 0 00 3 Time and date Main area Done Mm La ive button Click this button to display the Live page Refer to page 7 for descriptions of how to operate the Live page GE Setup button 1 Click this button to display the setup menu fa AG l
52. rmat page 19 Main area 4 2 3 Images from the camera will be displayed in this area Operable by only users whose access level is 1 Administrator Operable by only users whose access level is 1 Administrator or 2 Camera control when ON is selected for User authentication page 35 The access level to operate this button can be changed by the settings of Authentication on the Audio tab page 26 Refer to page 35 for further information about the access level Available operations when live images are displayed 1 Operable by only users whose access level is 1 Administrator 2 Operable by only users whose access level is 1 Administrator or 2 Camera control when ON is selected for User authentication page 35 3 The access level to operate this button can be changed by the settings of Authentication on the Audio tab page 26 Refer to page 35 for further information about the access level Operation Display the setup menu 1 Display images on a multi screen Display MPEG 4 image Display JPEG image Change the image capture size Image resolution Zoom in out of image 2 Change brightness 2 Open close the AUX con nector 2 Description The letters Setup on the button will turn green and the setup menu will be displayed To return to the Live page click the Live button Images from multiple cameras can be display
53. round 1 minute after the initialization Initialize setup data and HTML data Click the Execute button to reset the settings and the HTML files to the default settings However the network settings will not be reset It is impossible to operate the camera for around 1 minute after the initialization Restart Click the Execute button to restart the camera The camera will be inoperable for around 1 minute after the restart just as when the power is turned on Note Turn on the power of the camera while holding down the INITIAL SET button of the camera and wait around 5 seconds without releasing the INITIAL SET button Wait around 30 seconds after releasing the button The settings including the network settings will be initialized 4 About the Displayed System Log Error indications relating to SMTP Category POPS server error SMTP server error Internal error Content Authentication error Cannot connect to POP3 server Authentication error Connection error to DNS server Description Entered user name or password may be incorrect Check if the mail settings are con figured correctly e The IP address of the server may be incorrect Check if the IP address of the server is configured correctly e The POP3 server may be down Ask the network administrator Entered user name or password may be incorrect Check if the mail settings are con figured correctly Connection error to DNS server
54. ry out the live transmission of JPEG images and the FTP periodic transmission simultaneously Notes e The port forwarding function changes a global IP address to a private IP address and Static IP masquerade and Network Address Translation NAT have this function This function is to be set in a router e To access the camera via the Internet by connecting the camera to a broadband router it is necessary to assign a respective port number for each camera and address translation by using the port forwarding function For fur ther information refer to the operating instructions of the broadband router in use Enter Global IP address colon port number in the Address box of the browser via the Internet VVV XXX YVY ZZZ 82 VVV XXX YVY ZZZ 81 Global address for the WAN VVWV XXX YVY ZZZ O 5 S 5 gt gt 5 S Internet WAN LEN Cable modem xDSL modem daks router Private address SIUPEUUUOUUG for the LAN A VV XXX yYyy ZZZ Address translation using the port forwarding function vVVV XXX yyy Zzz 82 gt 192 168 0 2 82 L a Private address 192 168 0 2 Port number 82 Address translation using the port forwarding function VVV XXX YYy ZZZ 81 gt 192 168 0 1 82 TH Private address 192 168 0 1 Port number 81 Configure the settings relating to DDNS DDNS Click the DDNS tab on the Network setup page amp page 16 The settings relatin
55. t name of the SMTP server used to send e mails Number of characters for the SMTP server address 1 128 characters POP server address When POP before SMTP is selected for Authentica tion enter the IP address or the host name of the POP server Number of characters for the POP server address 1 128 characters Important When entering the host name for POP server address it is necessary to configure the DNS set tings on the Network tab of the Network setup page page 40 Authentication Select the authentication method to send e mails from the following None It is unnecessary to clear any authentication to send e mails POP before SMTP It is necessary to clear the POP server authentication first to use the SMTP server to send e mails SMTP It is necessary to clear the SMTP server authen tication to send e mails Default None Note When you don t know the authentication method to send e mails refer to the network administrator User name Enter the user name to access the server Number of characters for the user name 1 32 char acters Password Enter the password to access the server Number of characters for the password 0 32 char acters Sender s mail address Enter the mail address of a sender Entered mail address will be displayed in the From sender line of the sent mails Number of characters for the sender s mail address 3 128 characters 3 3
56. tain descriptions of how to operate this product using a PC via a network and of how to configure the settings Refer to the operating instructions book for descriptions of how to install this product and of how to connect to a network Adobe Reader is required to read these operating instructions PDF When the Adobe Reader is not installed on the PC download the latest Adobe Reader from the Adobe web site and install it Trademarks and registered trademarks e Adobe Adobe logos and Acrobat are registered trademarks of Adobe Systems Incorporated in the U S and or other countries e SD logo is a trademark e Other names of companies and products contained in these operating instructions may be trademarks or regis tered trademarks of their respective owners Monitor Images on a PC The following are descriptions of how to monitor images from the camera on a PC Monitor images from a single camera Step 1 Start up the web browser Step 2 Enter the IP address designated using the Panasonic IP setup software in the address box of the browser Example http 192 168 0 10 Panasonic Global gt what is the color of mystery get a chance to win a x Swiss bank account and Panasonic products play now Copyright 2005 Panasonic Corporation of North America All rights reserved Important e When the HTTP port number is changed from 80 to 81 enter the IP address of
57. tcnecnetracinl a Me tacaieie 14 Display the Setup Menu and Configure the Settings of the Camera using a PC 15 FIOW 10 GlSPlay the SCTUD Menu iv scihivadaadidin cousaidvarstannited Snanshaevetdaniivinkualhds kehiaidumscenciiens 15 How to operate the setup MENU saira 16 Configure the basic settings of the camera Basic setup cccccseeeeeeeeeeeeeeeeeeeees 19 Configure the settings relating to images and audio Camera Setup c cseeees 22 Configure the multi screen settings Multi screen Setup cccecsseseeeeeeeeeeeeeeeeeeees 27 Configure the alarm settings Alarm setup cccccccseeecceeceeeeeeeeeeeeaeeeseeeeeeeeeaeeeeeees 28 Configure the settings relating to the authentication Authentication setup 35 Configure the settings of the servers Server setup cccccseeececeeeeeeeeeeeeeeeeseeeeees 37 Configuring the network settings Network setup ccccccesseeeeeeeeseeeeeeeeeeeseeeeeeeess 39 Maintenance of the camera Maintenance cccccseececcseeeeeeeeeeeseeeeeseeeeeseeeeesseeeeeas 45 About the Displayed System Log neir meeen eaii ania a aN aaia iie 48 TrOuDIESNOOUNG arrena T ee ee re 50 Preface About these operating instructions There are 2 sets of operating instructions for the WV NP244 as follows e Operating Instructions book e Operating Instructions PDF these operating instructions These operating instructions con
58. ult blank tings Password Retype password Enter the password Number of characters for the password 4 32 char acters Default blank Note When the user name already in use is entered and the REG button is clicked the respective user infor mation will be overwritten 35 36 Configure the settings relating to the host authentication Host Click the Host tab on the Authentication setup page page 16 The settings to restrict PCs IP address to access the camera can be configured on this page File Edit View Favorites Tools Help Q sxx Q a P Search JIE Favorites g s ee a 33 Address http f1 infi E Host authentication Select ON or OFF to determine whether or not to authenticate the host Default OFF Important Before configuring the host authentication it is nec essary to register IP addresses of the PCs to be allowed to access the camera and determine their access levels If ON is selected for Host authenti cation before registering the hosts IP addresses it will be impossible to access the camera IP address Enter the IP address of the PC to be allowed to access the camera Host name is unavailable for the IP address Notes When IP address subnet mask is entered it is pos sible to restrict PCs in each subnet For example when 192 168 0 1 24 is entered and 2 Camera control is selected for the access level the PCs whose IP
59. ummer time An asterisk will be dis played on the left side of the displayed time and Time and date setup date Enter the current time and date When 12 hours is OFF Does not apply summer time selected for Time display AM or PM can be select Default OFF ed Available range 01 01 2005 0 00 00 12 31 2035 Link Access LED 23 99 59 59 Select ON or OFF to determine whether or not to Default 01 01 2005 0 00 00 light the link LED the access LED of the network con nector and the SD memory card error LED Time display Select ON to check the network status by lighting the Select 12 hours or 24 hours Enter the current hour LEDs Select OFE to turn off the LEDs at all times reflecting this setting when entering the current time and However the power indicator will light even when OFF date for Time and date setup is selected Default 24 hours Default ON 19 20 Notes e Link LED This LED will light when communication with the connected device is available e Access LED This LED will light when accessing to a network e SD memory card error LED This LED will light when it is impossible to write data on the SD memo ry card Configure the settings relating to the NTP server NTP Click the NTP tab on the Basic setup page page 16 The settings relating to the NTP server such as the NTP server address port number etc can be configured on this page File Edit View Favorites T
60. up menu Basic setup Camera setup HH mepe ae g X Multi screen setup Authentication setup 1 white I 2 Blue 4 Red Middle Server setup Network setup Maintenance Help Done Internet Step 3 Select the detection sensitivity from the following The selected detection sensitivity will be applied to all the VMD areas High Middle Low Default Middle Step 4 Click the SET button after completing the settings Important The setting will not be applied unless the SET but ton is clicked 31 Delete the set VMD area Step 1 Click the Delete button respective to the area to be deleted The outline of the area will disappear y WV NP244 Network Camera Microsoft Internet Explorer gt File Edit Yiew Favorites Tools Help Q sxx X x El A J gt search Sie Favorites B tb E 3 Address http 192 168 0 10 adminfindex html xj gt Go Network Camera WV NP244 WV NP244 Live Camera setup Mult screen setup Authentication setup Server setup Network setup Maintenance Help Done Internet Step 2 Click the SET button The deletion will be completed Important The deletion will not be completed unless the SET button is clicked 32 Configure the settings relating to the mail notification Notification Click the Notification tab on the Alarm setup page page 16 The settings relating to the alarm mai
61. ured at an alarm occurrence or captured at a designated interval to an FTP server will become available Important When using this function set the user name and password to restrict users who can log into the FTP server Transmit an alarm image at an alarm occurrence Alarm image FTP transmission An alarm image can be transmitted at an alarm occurrence to the FTP server To transmit alarm images to an FTP server it is necessary to configure the settings in advance The settings for the FTP server can be configured on the FTP tab of the Server setup page page 38 The alarm image FTP transmission function can be turned on off on the Alarm tab of the Alarm setup page page 28 Note Depending on the network traffic number of the transmitted images may not reach the set number of images to be transmitted Transmit images at a designated interval or period FTP periodic transmission Images can be transmitted at a designated interval or period To transmit images at a designate interval or period it is necessary to configure the settings in advance The settings for the FTP server can be configured on the FTP tab of the Server setup page page 38 On the FTP tab of the Network setup page the FTP periodic transmission function can be turned on off and the settings relating to schedules periods can be configured page 43 Notes e Depending on the network line speed or the network traffic images ma
62. vorites Tools Help Q x amp x a O P Search JE Favorites amp 2B a E 33 Address http 192 168 0 10fadmingindex ht E p 7 l w Go rv y 2005 01 01 0 00 OON OFF i 1 655385 F ololog D F z S a x S m i r sll f E E E E m F Panasonic alarm protocol Select ON or OFF to determine whether or not to notify of an alarm occurrence by Panasonic alarm proto col when an alarm is detected Default OFF Destination port Select a destination port of the Panasonic alarm proto col from the following Available port number 1 65535 Default 1818 Retry times Select a retry time of Panasonic alarm protocol Available retry times 1 30 Default 2 IP address Enter the destination IP address of the Panasonic alarm protocol from the following Host name is unavailable for the destination IP address Up to 8 destination address es can be registered To notify by Panasonic alarm protocol check the Notification setup checkbox respective to the desired IP address To delete the registered IP address click the DEL button respective to the desired IP address Configure the settings relating to the authentication Authentication setup The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be con figured on this page The Authentication setup page has 2 tabs of the User tab and the Host tab
63. y not be transmitted at the exact designat ed interval or period e When ON is selected for both of the alarm image FTP transmission function and the FTP periodic transmission function the alarm image FTP transmission function will be given priority over the FTP periodic transmission function For this reason images may not be transmitted at the exact designated interval or period if alarms occur frequently 11 12 Save images on the SD memory card when failed to transmit images by the FTP periodic transmission function Images failed to transmit by the FTP periodic transmission can be saved automatically on the SD memory card To obtain the images saved on the SD memory card use the Windows command prompt or FTP client software The obtained images can be browsed on a PC Important We make no guarantee for any damages of files on the SD memory card incurred by malfunction or error occur rence in files saved on the SD memory card regardless of what the cause may be Save images on the SD memory card By configuring the following settings saving images which had been failed to transmit to the FTP server using the FTP periodic transmission function will become available About SD memory card Use page 21 File name With time and date page 43 Obtain images on the SD memory card Step 1 Access the camera using the Windows command prompt or FTP client software The window with the user name and password entry fields will

Operating Instructions

Contents

Download Pdf Manuals

Related Search

Related Contents