FULLCHAIR® POSITION CHAIR EGRESS SIDE EXIT ASSIST
Contents
1. button located on head end siderail until the indicator light turns green The surface will begin to inflate under the patient Once the patient reaches their ideal egress position assist the patient with bed exit TO DEACTIVATE Press the Side Exit Assist control on the head end siderail BOOST POSITIONING SYSTEM The Boost Positioning System assists with the movement of the patient to the head end of the bed TO ACTIVATE Press and hold the Boost control on the siderail The bed will transition to the Trendelenburg position If the bed has an air system the mattress will go into Max Inflate for 30 minutes Release the Boost control when the desired position is reached Reposition the patient as needed TIP To return to the flat position press and hold the Bed Flat control If the bed has an air system press the Normal control for the surface Hill Rom reserves the right to make changes without notice in design specifications and models The only warranty Hill Rom makes is the express written warranty extended on the sale or rental of its products 2014 Hill Rom Services Inc ALL RIGHTS RESERVED 185826 rev2 03 NOV 2014 ENG US www hill rom com USA 800 445 3730 CANADA 800 267 2337 CONTINUOUS LATERAL ROTATION THERAPY Rotation Full Moderate Minimum Rotation provides side to side Continuous Lateral Rotation Therapy CLRT to aid in the prevention and treatment of pulmonary complica2. E Press the Surface tab on the GCI Press the Normal control ZERO NEW PATIENT New Patient NA New Patient TO ACTIVATE Make sure the patient is not in bed Put bed in required position Press the Scale control on the GCI Press Zero PRESS NEW PATIENT Erases Scale History Zeroes the scale Returns surface to Normal mode Turns off RemindMe reminders PRESS ZERO Does not erase Scale History Zeroes to scale Enhancing outcomes for patients and their caregivers PATIENT COMFORT Adjust the firmness of the surface to meet the comfort levels of the patient TO ACTIVATE Press the Surface tab Press the Patient Comfort tab Use the Comfort Adjustment controls to change the pressure in the head seat and heal section of the mattress To increase the pressure press the Up arrow To decrease the pressure press the Down arrow USING THE SCALE NON OIML r Scale Last Weight BMI NIA Height NIA 0 0 Ib Initial Weigh Patient History TO ZERO THE SCALE Make sure the patient is not in the bed Press the Scale tab Press Zero the Bed and follow on screen instructions TO WEIGH THE PATIENT Make sure the patient is in the center of the bed Press the Scale tab Press Weigh Patient and follow on screen instructions You will be prompted to put the bed into the recommended position Green screen indicates recommended position is achieved Press Contin
3. Progressa Bed Tips FULLCHAIR POSITION TO ACTIVATE Set the brake Press and hold the Chair button on the siderail or caregiver pendant to go into the FullChair position The patient deck will slightly recline backwards as the seat and lumbar sections on the mattress slightly deflate If the footboard is installed when the articulation stops and a tone sounds the bed has reached the FullChair position NOTE If the footboard is not installed the bed will proceed into Chair Egress CHAIR EGRESS TO ACTIVATE Set the brake Recommend removal of footboard at this point Press and hold the Chair button on the siderail or caregiver pendant to go into the FullChair position If the footboard is installed the bed has reached the FullChair position when the articulation stops and a tone sounds NOTE If the footboard is not installed the bed will proceed into the chair egress position Required removal of footboard at this point Press and hold the Chair button until the bed lowers completely Seat Deflate will activate to lower the patient Bed will beep 3 times indicating the surface is deflated Hold Chair again to proceed to Chair Egress position The bed tilts and then the knee lowers OPTIONAL EGRESS ASSISTANCE Hold Chair again to inflate back section for egress assist SIDE EXIT ASSIST TO ACTIVATE Raise or lower the bed so the patient s feet will be flat on the floor Press the Side Exit Assist
4. e turn assist Once turn assist is initiated you may lower a siderail to facilitate patient care The bed will alarm as a safety precaution TO ACTIVATE Select the Surface tab on home screen Select the Right Turn Assist tab patient s right Confirmation On the home screen the Right Turn Assist icon will be highlighted when active TO DEACTIVATE Select the Surface tab on home screen Select the Normal control FOR COMPLETE INSTRUCTIONS ON HOW TO OPERATE THE PROGRESSA BED SEE USER S MANUAL BED EXIT ALARM The bed exit alarm will notify the caregiver of activities including Out of Bed patient s weight shifts significantly off the frame of the bed Exiting patient moves away from the center of the bed towards an egress point Position patient moves toward either siderail or moves away from the head section such as sitting up in bed TO ACTIVATE Ensure patient is centered on the bed and aligned with the hip indicator Select the Alarms tab Select the Bed Exit tab Select Position Exiting or Out of Bed If you change your selection the GCI will arm The home screen will then display Bed Exit On and highlight icon SLEEP MODE Sleep Mode is used to reduce frequency of air system adjustments for patients who are sensitive to air surface movements After 8 hours the Normal mode reactivates TO ACTIVATE Press the Surface tab on the GCI Press the Sleep Mode control TO DEACTIVAT
5. tions related to immobility TO ACTIVATE Select Pulmonary Therapy control on the GCI Select Rotation For pre set options select Full Moderate or Minimum For custom option select Custom Set rotation direction rotation percentage and duration Select either Yes or No on rotation training mode Select Start PERCUSSION amp VIBRATION Percussion amp Vibration helps loosen secretions in the lungs and helps move lung secretions for easier removal TO ACTIVATE Select the Pulmonary Therapy control on the GCI Select P amp V For pre set options select High Medium or Low For custom option select Custom Set Percussion intensity Set Vibration intensity frequency and duration Select Start MAX INFLATE Maximizes the firmness of the primary section of the patient surface The bed will stay in Max Inflate for 30 minutes before returning to normal standard state TO ACTIVATE On the home screen select the Surface tab Select Max Inflate Confirmation On the home screen the Max Inflate icon will be highlighted when activated TO DEACTIVATE Select the Surface tab on the home screen Select Normal Select the Max Inflate button on the upper side rail control TURN ASSIST RIGHT fet Home Assists caregiver in turning the patient for linen changes dressing changes bed panning back care and other nursing procedures Siderails must be in the up position to activat
6. ue Note You can weigh the patient if the bed is not in recommended position You will be prompted to remove all items hanging on the bed frame Once patient is weighed press Accept to move on or Re weigh to redo the weighing process PATIENT HISTORY TO VIEW PATIENT HISTORY Press the Preference tab on the GCI Press History Select the desired history to display Head Angle Time spent with the head of bed more than 30 or 45 since 12am Bed Exit Time spent with the Bed Exit alarm ON Scale Weight increase or decrease in 24 hour periods Rotation The maximum number of cycle hour the patient has rotated and Hrs Mins in rotation in 24 hours P amp V The number of treatments provided per 24 hour period OPTI REST Time spent in OPTI REST mode since 12am Chair Time spent in Chair position since 12am WEIGHT HISTORY TO VIEW THE WEIGHT HISTORY Press Scale tab Press History tab Icons will provide information based on Initial weight Weight taken in recommended position Weight taken in non recommended position
Download Pdf Manuals
Related Search