Home

User Manual

image

Contents

1. The Bluetooth function of the device is not enabled Refer to the user manual of the device for how to enable the function The adapter is already connected with another Bluetooth enabled device Disconnect that device and then try again The paired device connects and disconnects constantly The Bluetooth reception is poor Move the device closer to the Bluetooth adapter or remove any obstacle between the device and the adapter For some devices the Bluetooth connection may be deactivated automatically as a power saving feature This does not indicate any malfunction of the system 6 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user s authority to operate the equipment Notice for the USA This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be d
2. 0 EA033 Philips Input 100 240 V 50 60 Hz 0 15 A Output 9 V 0 33 A Operation Power Consumption lt 3W Dimensions Main Unit WxHxD 74x28 x 72 mm Weight Main Unit 0 04 kg EN 6 5 Troubleshooting e Never remove the casing of this device Warning To keep the warranty valid never try to repair the system yourself If you encounter problems when using this device check the following points before requesting service If the problem remains unsolved go to the Philips Web page www philips com support When you contact Philips make sure that the device is nearby and the model number and serial number are available No power ake sure that the AC power adapter is connected properly ake sure that there is power at the AC outlet No sound from your Hi Fi system Check if the Hi Fi system is connected to power ake sure that the system is connected with the Bluetooth adapter properly ake sure that the Bluetooth wireless connection is successful Adjust the volume of your system and Bluetooth device ake sure that the Hi Fi system is in Audio in or line in mode About Bluetooth device The audio quality is poor after connection with a Bluetooth enabled device The Bluetooth reception is poor Move the device closer to the Bluetooth adaptor or remove any obstacle between the device and the adaptor EN Cannot connect with the device
3. Always there to help you Register your product and get support at www philips com welcome haere AEA2000 UeStION ontact Bhilips User Manual PHILIPS Contents 1 Important Important Safety Instructions 2 Your Bluetooth Adapter 4 Introduction 4 What s in the box 4 3 Play 4 Connect audio cables 4 Connect power 5 Enter pairing mode 5 Play from Bluetooth enabled devices 5 4 Product information 6 Specifications 6 5 Troubleshooting 7 About Bluetooth device 7 6 Notice 8 Disposal of your old product 8 EN 1 Important Important Safety Instructions O Read these instructions Q Keep these instructions GB Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer a Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combinat
4. erence that may cause undesired operation Disposal of your old product Your product is designed and manufactured with high quality materials and components which can be recycled and reused lever dispose of your product with other household waste Please inform yourself about he local rules on the separate collection of electrical and electronic products and batteries The correct disposal of these products helps prevent potentially negative consequences on he environment and human health Please visit www recycle philips com for additional information on a recycling center in your area Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of EN 8 packaging materials exhausted batteries and old equipment 2012 Koninklijke Philips Electronics N V Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly Philips Consumer Lifestyle A division of Philip
5. etermined by turning the equipment off and on the user is encouraged o try to correct the interference by one or more of the following measures e Relocate the receiving antenna e Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Warning e Changes or modifications made to this equipment not expressly approved by Philips many void the FCC authorization to operate this equipment This equipment complies with FCC s and IC s RF radiation exposure limits set forth for an uncontrolled environment The antenna s used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter Installers must ensure that 20cm separation distance will be maintained between the device excluding its handset and users This Class B digital apparatus complies with Canadian ICES 003 This device complies with Industry Canada license exempt RSS standard s The set complies with the FCC Rules Part 15 Operation is subject to the following two conditions e This device may not cause harmful interference and e This device must accept any interference received including interf
6. ion to avoid injury from tip over IN O Unplug this apparatus during lightning storms or when unused for long periods of time 3 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Apparatus shall not be exposed to dripping or splashing 45 Do not place any sources of danger on the apparatus e g liquid filled objects lighted candles This product may contain lead and mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronic Industries Alliance www eiae org D Where the plug of the Direct Plug in Adapter is used as the disconnect device the disconnect device shall remain readily operable Warning e Never remove the casing of this apparatus e Never place this apparatus on other electrical equipment e Ensure that you always have easy access to the power cord plug or adaptor to disconnect the apparatus from the power 2 Your Bluetooth Adapter Introduction By connecting the Bluetooth adapter to your Hi Fi speaker system you can enjoy audio from your Bluetooth enabled device on you
7. onnection If necessary enter default password 0000 Ly f connection is successful the Bluetooth indicator becomes solid blue 3 Play audio on your device L gt Audio streams from your device to your Hi Fi system Note e If your Bluetooth device has been paired with AEA2000 before you just need to find out PhilipsBT on your Bluetooth menu then start the connection e This Bluetooth adaptor can memorize up to 8 previously paired devices To disconnect the Bluetooth enabled device e Press again e Tap PhilipsBT on the Bluetooth menu again e Deactivate Bluetooth function on your device or e Move the device beyond the communication range To connect another Bluetooth device 1 Disconnect the previously connected device 2 Pair with your selected Bluetooth device To clear pairing history in the Bluetooth adapter Press and hold for 7 seconds L gt The Bluetooth indicator stays in solid blue for 2 seconds then returns to the previous status 4 Product information Note e Product information is subject to change without prior notice Specifications Amplifier Output Voltage 1000 mV RMS Signal to Noise Ratio gt 62 dBA Total Harmonic Distortion lt 2 Bluetooth Standard Bluetooth Standard Version 2 1 EDR 2 402 2 480 GHz Range 10m Free space Frequency Band General information AC Power Model ASO30 09
8. r Hi Fi system through Bluetooth wireless connection What s in the box Check and identify the contents of your package e Main unit e AC power adaptor e RCA audio cable User manual 3 Play Always follow the instructions in this chapter in sequence Connect audio cables There are two ways to connect the Bluetooth adaptor to your Hi Fi system Select one fit for the Hi Fi system Option 1 Fig A OIO Ol AUDIO IN a OIC a K LINE OUT li EN 4 Connect power EI Caution e Risk of product damage Make sure that the power supply voltage matches the voltage printed on the bottom of the unit e Risk of electric shock Hold the plug securely when unplugging the device e The type plate is located on the bottom of the Bluetooth adaptor Connect the power adaptor to e the DC IN socket at the back of the Bluetooth adapter e the wall outlet Enter pairing mode When connected to power the Bluetooth adaptor goes to Bluetooth pairing mode automatically e If your Bluetooth device has not been paired with the Bluetooth adapter before you need pair with the Bluetooth adapter first then play audio on the device See the section Play from Bluetooth enabled devices e If your Bluetooth device has been paired with the Bluetooth adapter before pre
9. s Electronics North America Corporation PO Box 10313 Stamford CT 06904 Phone 1 888 PHILIPS 744 5477 Meet Philips at the Internet http www philips com welcome PHILIPS Specifications are subject to change without notice 2012 Koninklijke Philips Electronics N V All rights reserved AEA2000_37_UM_V1 1
10. ss 3 L gt The Bluetooth adapter attempts to connect the previously connected Bluetooth device If it fails the adapter returns to the pairing mode Tip e Ifthe Bluetooth adapter fails to pair with a Bluetooth device the Bluetooth adapter exits the pairing mode in 2 minutes and the LED light becomes dim You can press to return to pairing mode LED Description indications Solid blue The Bluetooth adapter and your Bluetooth enabled device are connected Flashing The Bluetooth adapter is waiting blue o be paired with a Bluetooth enabled device Dim light The Bluetooth adapter is neither in connection with a Bluetooth device nor in the pairing mode Play from Bluetooth enabled devices e The effective operating range between the Bluetooth adapter and the paired device is approximately 10 meters 30 feet e Keep this Bluetooth adapter away from other electronic devices that may cause interference e Compatibility with all Bluetooth devices is not guaranteed e Make sure that the Bluetooth adapter is connected to the powered Hi Fi system correctly e Make sure that your Hi Fi system is in Audio in or line in mode 1 On your Bluetooth device turn on Bluetooth function and search for Bluetooth devices refer to the device s user manual 2 When PhilipsBT Philips Bluetooth adapter is displayed on your device select it to start pairing and c

Download Pdf Manuals

image

Related Search

Related Contents

Canon SX150IS - closebr.com.br  Samsung Galaxy S Advance NFC Uživatelská přiručka  Taylor AC-1250-BL User's Manual  Real Flame 3750E-O Instructions / Assembly  Blaupunkt Las Vegas DVD35 User Guide Manual  SPI-HD3 取扱説明書  BL-NavLV Quick Start Guide  Belleza  GROHE K7  Rock Rail Running Boards for Ford F  

Copyright © All rights reserved.
Failed to retrieve file