User Manual
Contents
1. any claim of any kind including claims based on warranty express or implied contract negligence strict liability or any other legal theories will be exclusively the repair or replacement of the appliance This liability will not include and the purchaser specifically renounces any right to recover special incidental consequential or other damages of any kind including but not limited to injuries to persons damage to property loss of profits or anticipated loss of the use of this appliance If any provision of this warranty is unenforceable under the law of any jurisdiction that provision only will be inapplicable there and the remainder of the warranty will remain unaffected The maximum exclusion or limitation allowed by law will be substituted for the unenforceable provision How to Obtain Warranty Service First direct your claim to the Anets Inc Authorized Service and Parts Distributor closest to you giving complete model serial and code numbers voltage gas type and description of the problem Proof of the date of installation and or the sales slip may also be required If this procedure fails to be satisfactory write the National Service Manager Anets Inc P O Box 501 Concord NH 03302 0501 USA This warranty gives you certain specific legal rights you may have other rights which vary from state to state Anets Inc P O Box 501 Jct I 89 amp I 93 Concord NH 03302 0501 509 Route 3A Bow NH 03304 USA Tel 603 225 6682. any pressure testing of the gas supply system at test pressures equal to or less than 2 psig 3 45 kPa c For grills utilizing the optional stand with casters the grill installation shall be made with a connector that complies with the Standard for connectors for Movable Gas Appliances ANSI Z21 69 latest edition or CAN CGA 6 16 latest edition and a quick disconnect device that complies with the Standard for Quick Disconnect Devices for Use with Gas Fuel ANSI Z21 41 or CAN CGA 1 6 9 latest edition Restrict the movement ofa grill on a caster equippped stand by using a limiting device for example a cable attached both to the grill and to a fixture attached to the site structure to avoid depending on the connector and the quick disconnect device or its associated piping to limit grill movement d The regulator supplied with the unit should be installed in the inlet gas supply line with the arrow on the regulator pointing in the direction of the gas flow e Install this grill on anon combustible cabinet or stand with its back and sides at least 6 away from any combustible wall A WARNING Install this grill under a ventilation hood that conducts combustion products outside the building Venting must comply with ANSI NFPA 96 latest edition f Install this grill in a location where adequate combustion and ventilation air is available Keep the area directly in front of the grill open for adequate air flow to the burner
3. feet reduce this rating 4 for each 1000 feet above sea level Gas Supply Inlet Pipe must be 4 NPT National Pipe Thread standard gas line The gas supply inlet line should be as straight as possible fewest bends or elbows to obtain the highest available gas pressure at the appliance NOTE Using a flexible inlet line permits variation in the gas supply line location both horizontally and vertically Anets grills are only for use with the type of gas specified on the spec plate Ifa grill requires modification to use a gas other than that which is identified on the grill spec plate contact your Anets representative or call 1 603 225 6684 4 L20 346 Rev 3 CODE REQUIREMENTS IMPORTANT Read the Code Requirements and the Installation Requirements and Instructions carefully before starting the installation Contact ANETS 1 603 225 6684 ifany problems or questions arise The grill installation must conform with local codes or in the absence of local codes with the National Fuel Gas Code ANSI Z223 1 latest edition the Natural Gas Installation Code CAN CGA B149 1 latest edition or the Propane Gas Installation Code CAN CGA B 149 2 latest edition as applicable including a Disconnect the grill at its individual shutoff valve from the gas supply piping system during any pressure testing of the gas supply system at test pressures in excess of 2 psig 3 45 kPa b Isolate the grill from the gas supply piping system during
4. salt as required on any dry spots that appear during this seasoning process 3 After 1 hour at 250 F advance the thermostat setting to 300 F Continue use of salt and oil for about 1 hour at 300 F At the end of 1 hour at 300 F a light tan uniform coating should be present on the top surface of the grill plate Ifit has not developed continue seasoning process as above at 350 F until coating is formed Note On manually operated grills keep the grill on low setting during entire seasoning process Following initial Conditioning of the grill plate the thermostats may be set to the desired temperature CHROME GRILL Conditioning Instructions SGC Models ONLY 1 Spread a coating of cooking oil evenly over the surface of the grill Set the thermostats to 350 F and allow to heat for 1 hour 2 Using the scraper provided remove any carbonized material before cooking GRILL SHUT DOWN PROCEDURE 1 To turn the grill off turn the gas control valve to the Pilot position To extinguish the pilot burners turn to the Off position 2 If burner flames are accidentally extinguished or the safety shutoff valves closes due to pilot failure turn all valves off Allow the unit to vent for at least 5 minutes before attempting to re light g L20 346 Rev 3 DAILY CLEANING PROCEDURE Standard Grill Cleaning Instruction MG amp SG Models Only Clean grill plate often to prevent sticking and poor quality of product Sc
5. 4 Fax 603 228 5231 www ANETS com L14 022 R1 Printed in U S A In the event of problems with or questions about your order please contact the Anets factory at 603 225 6684 World Wide Website Address www anets com In the event of problems with or questions about your equipment please contact the Anets Authorized Service and Parts representative ASAP covering your area or contact Anets at the number listed to the left MAILING ADDRESS P O BOX 501 CONCORD NH 03302 0501 SHIPPING ADDRESS 10 FERRY STREET CONCORD NH 03301 L20 346 Rev3
6. ANETS INC PO Box 501 Concord NH 03302 0501 Tel 603 225 6684 Fax 603 225 8497 Models MG Manual Grills SG Standard Grills SGC Chrome Grills Installation User Operation amp ee a ma Maintenance GoldenGRILL Manual DANGER Improper installation adjustment alteration service or maintenance can cause property damage injury or death Read the installation operating and maintenance instructions thoroughly before installing or servicing this equipment FOR YOUR SAFETY DO NOT store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance A WARNING After installation of this equipment immediately contact your local gas supplier to obtain information about what action to take whenever any person smells gas Post this information in a prominent location Keep this Manual in a Convenient Location for Reference CERTIFIED D The Anets GoldenLine Quality Equipment For The Restaurant Supermarket and Bakery Industries L20 346 Rev 3 L20 346 Rev3 2 CONTENTS Shipping Container Inspection x oiscssacdcssvupdansasbevderwsivenieeriiesanweienns 3 Grill Gas Supply Specifications ccceccceecseesseceeeceeeeeeeeeeeeeeaeens 4 Code Requirements 5550555 25 tanatesacrditthecartrtaeancneeernaedemiciameeans 5 Installation Requirements fosssussisvisisssauucssunddarventoish exautesissienoninendinins 6 Gas Connection Instructions ec
7. NCE INSTRUCTIONS NOTE Regular maintenance is strongly recommended to keep the grill operating properly Once each month before beginning grill operation check the flue behind the backsplash panel to ensure that it is clear and free of obstructions enabling exhaust combustion gases to flow freely toward the ventila tion hood area DO NOT allow the flue to become excessively dirty NEVER allow the flue to be blocked Monthly observe the condition of the ventilation hood Ifit shows evidence of a great deal of greasy residue remove clean the residue to allow free flow of ventilation air taking care not to knock any residue into grill flue L20 346 Rev3 9 GRILL TROUBLESHOOTING GUIDE All service repairs or part replacement must be performed by a qualified Service Agency PROBLEM Pilot piezo electric pushbutton igniter does not light the pilot flame Pilot flame does not stay lit 10 L20 346 Rev3 Check if igniter is generating a spark Check for loose spark wire or igniter nut Check position of electrode 3 16 from pilot burner tip Check for dirty sooty electrode Retry igniter Observe if pilot flame is wavering being blown about by a draft Observe if pilot flame is too small to heat thermocouple Check for dirty sooty pilot burner Check thermocouple output voltage Check gas supply pressure with all other equipment operating 6 WC for natural gas
8. OOTING GUIDE Continued PROBLEM CAUSE meme Continued Grill plate is cold Burners not firing Grill plate is not hot enough Black soot accumu lation on burners on under side of grill plate 12 L20 346 Rev3 Check gas supply pressure with all other equipment operating 6 WC for natural gas and 11 WC for propane minimum Observe if main burners are firing Check that thermostat control setting is at desired setting Check gas supply pressure with all other equipment operating 6 WC for natural gas and 11 WC for propane minimum Check for fans or excessive air flow over grill surface Check for dirty sooty pilot burner Observe if grill plate temperature is acceptable Check if pressure regulator is installed in supply line Adjust pressure regulator setting by turning the adjusting slot counter clockwise under the slotted cap 5 Increase if needed proceed to test 6 6 Yes Okay No Replace thermostat Yes Proceed to test 2 No Increase setting Skip to test 5 Above Proceed to test 3 Below Increase gas supply pressure Skip to test 5 Yes Block or turn off air supply Skip to test 5 No P proceed to test 4 Yes Clean pilot burner Proceed to test 5 No proceed to test 5 Yes Okay No Replace thermostat Yes Proceed to test 2 No Install regulator supplied with unit Proce
9. and 11 WC for propane minimum Observe pilot flame TEST REMEDY 1 Yes Skip to test 3 No Proceed with test 2 Yes Tighten skip to 5 No Proceed with test 3 Yes Skip to test 4 No Reposition electrode and skip to test 5 Yes Clean skip to test 5 No Proceed with test 5 Lights Okay Doesn t light Replace igniter mechanism Yes Block or redirect the draft to keep the flame burning steadily Skip to test 6 No Proceed with test 2 Yes Adjust the pilot valve part of gas control valve to increase the flame size un screw and retain the slotted threaded cover turn the pilot valve adjustment screw two turns counter clockwise re install the threaded cover Skip to test 6 No Proceed with test 3 Yes Clean Skip to test 6 No Proceed with test 4 More than 10 millivolts proceed with test 5 Less than 10 millivolts replace thermocouple skip to test 6 Increase if needed proceed with test 6 Stays lit Okay Does not stay lit Replace gas control valve GRILL TROUBLESHOOTING GUIDE Continued PROBLEM Main burners do not ignite Over temperature or main burners do not stop burning Grill plate is cold Burners not firing CAUSE REMEDY 1 Check that gas control valve is set to l ON Check that pilots are burning Increase temperature setting on thermo
10. cesceseeseeeteeeeeeeecesecneeeeeeneeeeees 6 Grill Operating Instructions aq saveiacsastiacstsenddeesnieeanteedeerciomnencans T Lighting Proced r ii csaxisndsxadcdssiavonaiuntcansbseiermebivesssnituserasndians 7 Grill Preparation For USE ccscicuccsssavssnnesessasadencccieussacdaunteqeoseumnavaniaars 8 Manual amp Standard Grill Preparation cccccceesseeeteeeeeeeeeee 8 Chrome Grill Preparation cccccccessceeseeeeeeseeceeeeeteeeeeeenaeees 8 Shutdown Procedure scsivsscgsissenatiieweiesnagniiensuenianienawwen 8 Daily Cleaning Procedure xcs scsssauscesssidaucusnceddcasentusacasunaacesawaviaaiavsuceas 9 Chrome Grill Cleaning Instructions ccccesseceteeeeeeeeeeeteees 9 Manual amp Standard Grill Cleaning Instructions c ee 9 Monthly Maintenance Instructions cccceeceeeseeeseeeeeceeeeeeeeeeseees 9 Grill Troubleshooting Guide cic cscissstearictsasatasieeundordsaialetaaravis 10 12 Gall Warranty 22 arccceicesten sa cuansucuasasaseucatescsntansciountuoseawivassenuenaseseeee 13 DANGER Read these specifications Code Requirements Installation Requirements Instal lation Instructions and Operating Instructions very carefully Failure to follow the Instructions could cause the grill to malfunction A grill malfunction can result in property damage serious bodily injury or death SHIPPING CONTAINER INSPECTION 1 Carefully examine the shipping container for external damage When damage i
11. e end user Gold Line Fryers In addition to the above general warranty for its standard fryers and cookers the Company warrants to the original user any stainless steel fry tank or cooking vessel to be free from defects for a period of 1 year parts and labor and 10 year Frypot or cooking vessel Part only from the date of manufacture Labor and freight shall be the responsibility of the end user Pasta Cooker In addition to the above general warranty for its standard fryers and cookers the Company warrants to the original user any stainless steel fry tank or cooking vessel to be free from defects for a period of one 1 year parts and labor and 5 years Frypot or cooking vessel part only after year one from the date of manufacture Labor and freight shall be the responsibility of the end user Limitations to Fry Tank and Cooking Vessel Warranty After the expiration of the general warranty period any additional warranty on fry tanks or cooking vessels shall only obligate the Company to repair or replace at its option any fry tank or cooking vessel which it determines to be defective Claims under this item shall be supported by a statement detailing the defect and the Company may require the return of the fry tank or cooking vessel claimed to be defective Labor and freight shall be the responsibility of the end user How to Keep Your Warranty in Force Make sure any shipping damages are reported immediately Damages of this nature are the responsibility o
12. ed to test 2 ORIGINAL EQUIPMENT LIMITED WARRANTY General Warranty Anets Inc warrants to the original user of its commercial cooking appliances and related equipment that said appliances and related equipment will be free from defects in material and workmanship under normal use for a period of one 1 year from the date of installation with appropriate documentation to a maximum of fifteen 15 months from the date of manufacture subject to the following additions exceptions exclusions and limitations What is covered This warranty is limited to the repair or replacement at the Company s option without charge of any part found to be defective within the warranty period and reasonable expenses incurred for freight and material for the installation of such part in addition the Company s obligation shall be limited to reimbursement for normal labor on such parts Anets Inc agrees to pay the Authorized Service and Parts Distributor for any labor and material required to repair or replace at the Company s option any part which may fail due to defects in material or workmanship during the above general warranty period Silver Line Fryers In addition to the above general warranty for its economy fryers and cookers the Company warrants to the original user any mild Stainless steel fry tank or cooking vessel to be free from defects for a period of one 1 year from the date of manufacture Labor and freight shall be the responsibility of th
13. f the carrier and must be reported by the receiver Install the unit properly This is the responsibility of the installer and the procedures are outlined in the manual Do not install it in a home or residence Maintain it properly This is the responsibility of the user of the appliance and the procedures are outlined in the manual Adjustments such as calibration leveling tightening of fasteners or plumbing or electrical connections normally associated with initial installation These procedures are outlined in the manual and are NOT covered by warranty If it is damaged due to flood fire or other acts of God this is not covered under this warranty Use it for what it is intended If it is used for a purpose other than for which it was intended or designed resulting damages are not covered under the warranty Make sure that it has the correct voltage gas supply and or good quality water If a failure is due to poor water quality harsh chemical action erratic voltage or gas supplies these damages are not covered under the warranty Do not materially alter or modify from the condition in which it left the factory Do not obliterate remove or alter the serial number rating plate Use only Genuine OEM parts from Anets Inc or its Authorized Parts and Service Distributors Repairs are not covered by the warranty If any other failure occurs which is not attributable to a defect in materials or workmanship it is not covered This warranty
14. of the grill A WARNING DO NOT use a flame to check for leaks 4 Open the gas supply line valve handle in line with line direction then confirm that all gas supply joints and couplings are free of leaks using soap suds or a leak check solution after the grill is in its desired location 5 Refer to Grill Operating Instructions to begin using your ANETS Grill 6 L20 346 R3 GRILL OPERATING INSTRUCTIONS CAUTION DO NOT operate this grill during an interruption of gas service Turn all grill controls to OFF including the gas control valve knobs then close the gas supply line valve When notified that the gas service has resumed perform the Lighting Procedure descibed below A DANGER A DANGER NEVER operate this grill when its flue is Avoid moving the grill while it remains blocked or when the ventilation hood is not HOT Let the grill cool before moving it on because the combustion products can for service cleaning or maintenance to accumulate and cause serious injury or avoid burns death A Schedule regular cleanings of the grill to ensure long term satisfactory operation Refer to the Daily Cleaning Procedure later in this manual B Before servicing and maintenance allow the grill to cool ALWAYS shut off gas to the grill while working on it to prevent personal injury C Contact the factory 1 603 225 6684 for warranty service authorization Always notify the factory the next business day about after h
15. ours warranty service Contact your local restaurant equipment service agency for other service repairs or maintenance activities as necessary LIGHTING PROCEDURE 1 Push in and turn gas control know to OFF Wait 5 minutes for any possible accumulation of gas in combustion area to escape 2 Turn the gas control know to PILOT Push the knob in and depress the spark ignitor several times to ignite the pilot 3 Continue to hold the knob in for 30 seconds Ifthe pilot goes out when the knob is released repeat steps 1 2 and 3 4 Repeat this procedure for all the pilots present 5 Turn the safety shutoff to ON and then set the thermostat or manual burner valve if so equipped L20 346 R3 7 GRILL PREPARATION FOR USE MANUAL AND STANDARD GRILLS ONLY DO NOT USE FOR CHROME GRILL Conditioning Instructions MG amp SG Models ONLY 1 Upon examination of your grill you will notice that the grill plate is covered with a protective grease To remove this grease turn grill thermostats to about 250 F setting or low setting on manually operated grills As the grill plate warms up carefully wipe the rust preventative grease off of the grill plate and side and rear splash plates with a soft cloth 2 When cleaning has been completed apply a film of cooking oil to the grill plate with a small amount of salt Allow plate to season for about 1 hour at 250 F while rubbing oil and salt into the grill surface Add oil and
16. rape the grill plate regularly with a spatula or scraper to remove all surface grease and food particles 3 Forthorough cleaning use a grill brick or grill screen to remove carbon build up on grill plate Do not use any abrasive or caustic cleaners or pads on the exterior surface of the unit Use only cleaners and polishes recommended for stainless steel Note It may be necessary to season grill again after this cleaning 4 Toclean grease drawer slowly and carefully remove from cabinet Cautiously pour contents into container wash out grease drawer Wipe dry and reinstall into grill cabinet NO Chrome Grill Cleaning Instructions SGC Models IMPORTANT Do not use any abrasive or caustic cleaners or pads on chrome grills SIMPLE 3 STEP PROCESS Scrape Scrub Shine 1 Scrape with the razor scraper provided Make sure razor edge is exposed The blade is turned inward during shipping for safety protection 2 Scrub with the palmyra cleaning brush provided and cool water 3 Shine only ifnecessary with Bon Ami cleanser water anda soft cloth Note It maybe necessary to condition grill again after this cleaning 4 Toclean grease drawer slowly and carefully remove from cabinet Cautiously pour contents into container wash out grease drawer Wipe dry and reinstall into grill cabinet DO NOT use a grill brick or grill screen or any caustic cleansers as this will damage the chrome surface MONTHLY MAINTENA
17. s DO NOT obstruct the flow of combustion and ventilation air g Keep the grill area free and clear from combustibles and debris L20 346 R3 5 INSTALLATION REQUIREMENTS install the grill in accordance with the preceding Code Requirements as well as the following Installation Requirements 1 DO NOT install this grill in a mobile home trailer or recreational vehicle 2 Install this grill ina location that allows it to be moved away from other adjacent appliances for cleaning and maintenance NOTE Ifthe grill is installed among a row of appliances with its only convenient movement forward sufficient room must be available in front of the grill to permit its separation from adjacent appliances for cleaning and maintenance CAUTION Hood make up air MUST NOT flow in a manner that restricts or impedes the natural flow of combustion or ventilation air 3 Confirm that the air from the ventilation hood flowing near the grill after installation is NOT blowing on the rear of the unit to prevent affecting the burner flames and possibly causing damage to plastic parts GAS CONNECTION INSTRUCTIONS Installing your ANETS Grill requires the following procedure 1 Ensure that all the gas control valve knobs on the grill are turned to the OFF position 2 Ensure that the gas supply inlet line valve is closed handle crosswise to the line direction 3 Connect the 4 gas supply line to the gas line regulator in the rear
18. s noted notify the delivery carrier immediately Save all packing materials for damage claim examination 2 Ifno external damage is noted remove the shipping container from the grill and examine the grill carefully for damage Place the grill in a safe location if damage is noted so that the freight damage claims adjuster can examine the grill Models Covered By This Manual MG Manual Gas Grills SG Standard Gas Grills SGC Chrome Gas Grills Standard Accessories furnished in the shipping carton with this grill include Models MG amp SG Models SGC Pressure Regulator Pressure Regulator Scraper amp Extra Blades Brush Cleaner NOTE A Parts List for each Anets Grill is among the items shipped with each grill If an additional copy of this list is needed please contact the factory as directed on the back cover L20 346 R3 3 GRILL GAS SUPPLY SPECIFICATIONS Please make sure that your desired grill location has gas supply factors that are suitable for this product kk MANIFOLD PRESSURE 37 W C 10 W C SUPPLY PRESSURE 11 W C minimum Measured at tap on back side of gas manifold _ WW Inches Water Column _ Measure supply pressure ahead of pressure regulator when all other gas powered equipment is operating Refer to the specification plate on the grill to identify the BTUH input for your specific model IMPORTANT NOTE BTU Hr Ratings are based on sea level operation For sites above 2000
19. specifically excludes parts which wear or would be replaced under normal usage including but not limited to electric lamps fuses interior or exterior finishes o rings and gaskets Limits to the Warranty Outside the United States of America and Canada this warranty is limited to the replacement of parts and Anets Inc will not bear any other expense be it labor mileage freight or travel If any oral statements have been made regarding the appliance these statements do not constitute warranties and are not part of the contract of sale This limited warranty constitutes the complete final and exclusive statement with regard to warranties THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES WHETHER WRITTEN ORAL OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR WARRANTY AGAINST LATENT DEFECTS Limitations of Liability In the event of a warranty or other claim the sole obligation of Anets Inc will be the repair or replacement at the Company s option of the appliance or the component part This repair or replacement will be at the expense of Anets Inc except as limited by this warranty statement Any repair or replacement under this warranty does not constitute an extension in time to the original warranty Parts covered under this warranty will be repaired or replaced at the Company s option with new or functionally operative parts The liability of Anets Inc on
20. stat control Check gas supply pressure with all other equipment operating 6 WC for natural gas and 11 WC for propane minimum Observe if main burners ignite Turn thermostat control to OFF Observe if main burners go off Turn gas control valve knob to OFF Observe if main burners go off Reset thermostat control to desired setting Observe if main burners go off when temperature is reached Check that gas supply is turned on Check for lit pilot Check that gas control valve is in ON position Check that thermostat control is at desired setting 1 Yes Proceed to test 2 No Turn to ON and skip to test 5 Yes Proceed to test 3 No Follow lighting instructions on page 7 Skip to test 5 Proceed to test 4 Increase if needed proceed to test 5 Yes Okay No Replace gas control valve Yes Skip to test 3 No Proceed with test 2 Yes Proceed with test 3 No Replace gas control valve Yes Okay No Replace thermostat Yes Proceed to test 2 No Turn on follow Lighting Instructions on page 7 Skip to test 4 Yes Proceed to test 3 No Follow Lighting Instructions on page 7 Skip to test 6 Yes Proceed to test 4 No Turn to ON Skip to test 6 Yes Proceed to test 5 No Increase setting Proceed to test 5 L20 346 Rev3 11 GRILL TROUBLESH
Download Pdf Manuals
Related Search