Abridged user`s manual - Vt.vtp
Contents
1. Click tabs B into their corresponding slots If you have DSL high speed Internet service a DSL filter not included is required The DSL filter must be plugged into the telephone wall jack Slide downward 3 Set date and time 1 Press MENU gt press V A to scroll to Set date time gt press SELECT 2 Use the dialing keys 0 9 to enter the month MM date DD and year YY gt Press SELECT 3 Use the dialing keys 0 9 to enter the hour HH and minute MM 4 Press V A to select AM or PM gt press SELECT to save your setting You can press CANCEL to go back to the previous field and make correction En 7 You can set the ringer volume level to one of four levels or turn the ringer off When the ringer is off R appears on the screen Press AVOLUMEY to adjust the ringer volume when the telephone is not in use OR 1 Press MENU gt press V A to scroll to Ringer volume gt press SELECT 2 Press V A or AVOLUMEY to sample each volume level 3 Press SELECT to confirm 5 Set language 1 Press MENU gt press W A to scroll to Language gt press SELECT 2 Press W A to choose from English Fran ais or Espanol gt press SELECT 3 Press SELECT again to confirm 6 Set contrast Adjust the screen brightness to a comfortable level from 1 to 4 1 Press MENU gt press V A to2. more information about DSL filters e Do not install this phone near a microwave oven or on the same electrical outlet You may experience decreased performance while the microwave oven is operating e If you plug your phone in with a modem or a surge protector plug the phone or modem surge protector into a different location If this does not solve the problem relocate your phone or modem farther apart from one another or use a different surge protector e If other phones in your home are having the same problem contact your telephone service provider charges may apply My caller ID isn t working e Caller ID is a subscription service You must subscribe to this service from your telephone service provider for this feature to work on your phone e The call may not be calling from an area that supports caller ID e Both your and your caller s telephone service providers must use caller ID compatible equipment e If you subscribe to high speed Internet service DSL digital subscriber line through your telephone line you must install a DSL filter between the telephone line cord and the telephone wall jack The filter prevents noise and caller ID problems resulting from DSL interference Please contact your DSL service provider for more information about DSL filters System does not receive caller ID when on a call e Make sure you subscribe to caller ID with call waiting features from your telephone service provider Cal
3. practical you will be notified as soon as possible You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC Your telephone service provider may make changes in its facilities equipment operation or procedures that could affect the proper functioning of this product The telephone service provider is required to notify you if such changes are planned 5 Hearing aid compatibility If this product is equipped with a corded or cordless handset it is hearing aid compatible 25 FCC and ACTA information 6 Programming testing of emergency numbers If this product has memory dialing locations you may choose to store police fire department and emergency medical service telephone numbers in these locations If you do please keep three things in mind a We recommend that you also write the telephone number on the directory card if applicable so that you can still dial the emergency number manually if the memory dialing feature doesn t work b This feature is provided only as a convenience and the manufacturer assumes no responsibility for customer reliance upon the memory feature c Testing the emergency telephone numbers you have stored is not recommended However if you do make a call to an emergency number e You must remain on the line and briefly explain the reason for the call before hanging up e Programming testing
4. 27 Limited warranty The AT amp T brand is used under license any repair replacement or warranty service and all questions about this product should be directed to In the United States of America visit www telephones att com or call 1 800 222 3111 in canada call 1 866 288 4268 1 What does this limited warranty cover The manufacturer of this AT amp T branded product warrants to the holder of a valid proof of purchase CONSUMER or you that the product and all accessories provided in the sales package PRODUCT are free from defects in material and workmanship pursuant to the following terms and conditions when installed and used normally and in accordance with the PRODUCT operating instructions This limited warranty extends only to the CONSUMER for products purchased and used in the United States of America and Canada 2 What will be done if the PRODUCT is not free from defects in materials and workmanship during the limited warranty period materially defective PRODUCT During the limited warranty period the manufacturer s authorized service representative repairs or replaces at the manufacturer s option without charge a materially defective PRODUCT If the manufacturer repairs the PRODUCT they may use new or refurbished replacement parts If the manufacturer chooses to replace the PRODUCT they may replace it with a new or refurbished PRODUCT of the same or similar design The manufacturer r
5. AKER to call To edit a directory entry 1 When the desired directory appears gt press SELECT 2 Edit the number gt press SELECT 3 Edit the name gt press SELECT To delete a directory entry 1 When the desired directory appears gt press DELETE X 2 The screen displays Delete contact gt press SELECT or DELETE X Speed dial This telephone has 10 speed dial memory locations 0 9 where you can store telephone numbers you wish to dial more quickly To store a speed dial entry 1 Press SPEED DIAL gt press V A to choose the desired speed dial location 0 9 gt press SELECT 2 Press SELECT again gt enter the telephone number using dialing keys 3 Press SELECT gt enter the name using dialing keys gt press SELECT To dial a speed dial entry When the telephone is in idle mode press and hold the dialing keys 0 9 to dial the corresponding speed dial number To delete a speed dial entry 1 Press SPEED DIAL gt press W A to choose the desired speed dial location 0 9 2 Press DELETE X gt press SELECT Call waiting e Press FLASH to put your current call on hold and take the new call e Press FLASH at any time to switch back and forth between calls Caller ID The telephone stores caller ID information about the last 50 incoming calls The handset displays XX missed calls when you have incoming calls that have not been answered To review the caller ID history 1 Press CALL L
6. Abridged user s manual CL4940 Big button big display telephone answering system with caller ID call waiting Ear mime To This abridged user s manual provides you with basic installation and use instructions Please refer to the online user s manual for a full set of installation and operation instructions at www telephones att com manuals Before using this AT amp T product please read Important safety information on page 22 of this abridged user s manual Parts checklist Your package contains e Telephone base with power adapter installed e Handset e Wall mount bracket e Coiled handset cord e Telephone line cord e Abridged user s manual Basic steps to set up amp operate your phone Basic installation Install telephone base Wall mount installation optional Common settings Set date and time Set ringer volume Set language 6 Set contrast Set dial mode Set area code Common operations 9 Directory Speed dial Call waiting Caller ID Answering system Install telephone base If you have DSL high speed Internet service a DSL filter not included is required The DSL filter must be plugged into the telephone wall jack Insert tab A and tabs B into the corresponding grooves Insert tab A into its corresponding slot
7. OGY gt press V A to scroll through the entries 2 Press CANCEL to exit To dial a caller ID entry Press V A to browse gt lift the handset or press 49SPEAKER to call To delete call records Delete a single call record Press DELETE X to delete the shown entry Delete all call records 1 Press MENU gt press V A to scroll to Caller ID log gt press SELECT 2 Press V A to select Del all calls gt press SELECT 3 When the screen shows Delete all calls press SELECT to confirm 10 The built in answering system must be turned on to answer and record messages Turn the answering system on or off Press ANS ON on the telephone base to turn the answering system on or off Message playback Press PLAY STOPP H to listen to the messages Record own announcement You can use the preset announcement to answer calls or replace it with your own recorded announcement 1 Press MENU twice to select Answering Sys gt press W A to scroll to Announcement gt press SELECT gt press V A to Record new gt press SELECT 2 After the tone speak towards the base MIC to record your annoucement 3 Press 5 when done Set number of rings You can set the answering system to answer an incoming call after 2 3 4 5 6 or 7 rings or select toll saver 2 4 answer a call after 2 rings when you have new messages or after 4 rings when there are no new messages or toll saver 4 6 answer a call after 4 rings when you have n
8. Telephones San Antonio TX 78219 Printed in China Issue 2 0 AT amp T 12 14
9. cord e If changing the telephone line cord does not help the wall jack or the wiring to this wall jack may be defective Try using a different wall jack in your home to connect your CL4940 telephone or contact your telephone service provider charges may apply I cannot dial out Try all the suggestions as mentioned above Make sure you have a dial tone before dialing Eliminate any background noise Noise from a television radio or other appliance may cause the phone to not dial out properly If you cannot eliminate the background noise first try muting the telephone before dialing or dialing from another room with less background noise If other phones in your home are having the same problem contact your telephone service provider charges may apply hear other calls while using my phone Disconnect the telephone from the telephone jack and plug in a different telephone If you still hear other calls call your telephone service provider System announces Time and day not set You need to set the system clock 17 Troubleshooting I get noise or static when use the telephone base e If you subscribe to high speed Internet service DSL digital subscriber line through your telephone line you must install a DSL filter between the telephone line cord and the telephone wall jack The filter prevents noise and caller ID problems as a result of DSL interference Please contact your DSL service provider for
10. d by use with non AT amp T accessories or e PRODUCT whose warranty quality stickers PRODUCT serial number plates or electronic serial numbers have been removed altered or rendered illegible or e PRODUCT purchased used serviced or shipped for repair from outside the United States of America or Canada or used for commercial or institutional purposes including but not limited to products used for rental purposes or e PRODUCT returned without a valid proof of purchase see item 6 or e Charges for installation or setup adjustment of customer controls and installation or repair of systems outside the unit 28 Limited warranty 5 How do you get warranty service To obtain warranty service in the United States of America visit www telephones att com or call 1 800 222 3111 in Canada please dia 1 866 288 4268 NOTE Before calling for service please review the user s manual A check of the PRODUCT controls and features might save you a service call Except as provided by applicable law you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT s to the service location The manufacturer will return repaired or replaced PRODUCT under this limited warranty Transportation delivery or handling charges are prepaid The manufacturer assumes no risk for damage or loss of the PRODUCT in transit If the PRODUCT fail
11. es 17 20 If you cannot solve the problem or if the product is damaged refer to Limited warranty on pages 28 29 Do not open this product except as may be directed in your user s manual Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks e If this product has a three prong grounding plug or a polarized plug with one wide prong it might not fit in outlets that are not polarized Do not defeat the purpose of these plugs If they do not fit in your outlet the outlet should be replaced by an electrician A CAUTION Use only the power adapter provided with this product To obtain a replacement visit our website at www telephones att com or call 1 800 222 3111 in Canada dial 1 866 288 4268 Especially about corded telephones e Electrical power The telephone base must be connected to a working electrical outlet The electrical outlet should not be controlled by a wall switch Calls cannot be made from the handset if the telephone base is unplugged switched off or if the electrical power is interrupted e Power adapter The power adapter is intended to be correctly oriented in a vertical or floor mount position The prongs are not designed to hold the plug in place if it is plugged into a ceiling under the table or cabinet outlet SAVE THESE INSTRUCTIONS 22 For C UL compliance In compliance with the bilingual requirements for safety caution and warning markings of Canadia
12. etains the defective parts modules or equipment Repair or replacement of the PRODUCT at the manufacturer s option is your exclusive remedy The manufacturer returns the repaired or replacement products to you in working condition You should expect the repair or replacement to take approximately 30 days 3 How long is the limited warranty period The limited warranty period for the PRODUCT extends for ONE 1 YEAR from the date of purchase If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty this limited warranty also applies to repaired or replacement PRODUCT for a period of either a 90 days from the date the repaired or replacement PRODUCT is shipped to you or b the time remaining on the original one year limited warranty whichever is longer 4 What is not covered by this limited warranty This limited warranty does not cover e PRODUCT that has been subjected to misuse accident shipping or other physical damage improper installation abnormal operation or handling neglect inundation fire water or other liquid intrusion or e PRODUCT that has been damaged due to repair alteration or modification by anyone other than an authorized service representative of the manufacturer or e PRODUCT to the extent that the problem experienced is caused by signal conditions network reliability or cable or antenna systems or e PRODUCT to the extent that the problem is cause
13. ew messages or after 6 rings when there are no new messages The toll saver feature allows you to check for new messages and avoid paying long distance charges when calling from out of your local area 1 Press MENU twice to select Answering Sys gt press V A to scroll to of rings gt press SELECT 2 Press V A to scroll to 2 3 4 5 6 7 Toll saver 2 4 or Toll saver 4 6 gt press SELECT NOTE Refer to pages 14 16 for advanced answering system operations 11 Telephone operation Press to display the caller ID history Press to scroll down Press to move the cursor to the left Press to enter the main menu Press to confirm selection Press to enter the directory Press to scroll up Press to move the cursor to the right Press to cancel an operation back up to the previous menu or exit the menu display Press and hold to reset the missed calls and new message alert Press to display the last number dialed While using the handset or speakerphone press to dial the last number dialed While entering numbers press to insert a three second dialing pause While storing numbers in the speed dial memory or directory press to copy the last number dialed Press to delete the displayed entry e Press to delete digits or characters when entering numbers or names 12 Telephone operation Press in idle mode to display the speed dial list Press to change the audio quality to best su
14. it your hearing Press AUDIO ASSIST to make the sound louder and clearer while on a call During a call press to answer an incoming call if you subscribe to a call waiting service provided by your telephone service provider While on a call press to adjust the listening volume While in idle mode press to adjust the base ringer volume Press to turn the speakerphone on or off During a call press to mute the handset or speakerphone Press again to resume your conversation Press to switch to tone dialing temporarily during a call if you have pulse service Audio Assist is a registered trademark of Advanced American Telephones 13 Answering system operation This built in answering system must be turned on to answer and record messages Press to repeat the message currently playing Press twice to play the previous message Press in idle mode to record a memo Press to start or stop message playback Press to skip a message during message playback Press to turn the answering system on or off Press to delete the playing message or announcement Press twice in idle mode to delete all Call screening If the answering system and call screening are on the announcement and the incoming message are broadcast at the telephone when a call is answered by the answering system By default the call screening is set to On To change the setting 1 Press MENU twice to choose A
15. ler ID features works only if both you and the caller are in areas offering caller ID service and if both telephone service providers use compatible equipment Incomplete messages e If a caller leaves a very long message part of it may be lost when the system disconnects the call after the recordings exceed the maximum recording time e If the caller pauses for longer than three seconds the system stops recording and disconnects the call 18 Troubleshooting e If the system s memory becomes full during a message the system stops recording and disconnects the call e If the caller s voice is very soft the system may stop recording and disconnect the call Difficulty hearing messages e Press AVOLUME or m EQUALIZER to increase the telephone speaker volume System does not answer after the correct number of rings e Make sure that the answering system is on ANS ON W light on the telephone should be on e If toll saver is activated the number of rings changes to two or four when you have new messages stored e If the memory is full or the system is off the system will answer after 10 rings e In some cases the answering system is affected by the ringing system used by your telephone service provider e If there is a fax machine connected to the same telephone line try disconnecting the fax machine If that solves the problem consult your fax machine documentation for information on compatibility with answering sy
16. might also have other rights that vary from state to state or province to province Limitations Implied warranties including those of fitness for a particular purpose and merchantability an unwritten warranty that the PRODUCT is fit for ordinary use are limited to one year from date of purchase Some states provinces do not allow limitations on how long an implied warranty lasts so the above limitation might not apply to you In no event shall the manufacturer be liable for any indirect special incidental consequential or similar damages including but not limited to lost profits or revenue inability to use the PRODUCT or other associated equipment the cost of substitute equipment and claims by third parties resulting from the use of this PRODUCT Some states provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion might not apply to you Please retain your original sales receipt as proof of purchase 29 Technical specifications Operating temperature 32 F 122 F o c 50 C Power adapter input AC120V 60Hz Power adapter output AC9V 300mA REN 1 2B 30 www telephones att com Audio Assist and Message Guard are registered trademarks of Advanced American Telephones 2014 Advanced American Telephones All Rights Reserved AT amp T and the AT amp T logo are trademarks of AT amp T Intellectual Property licensed to Advanced American
17. n Federal and Provincial Territorial statutes and regulations the French version of Important safety information is included Mesures de s curit importantes Ce symbole vous alertera d informations importantes ou d instructions d entretien pouvant appara tre dans ce guide d utilisation Respectez toujours les mesures de s curit et de s curit de base lorsque vous utilisez ce produit afin de r duire les risques de blessures d incendie ou d lectrocution Information relative La s curit e Veuillez lire et comprendre toutes les instructions de ce guide d utilisation Relectez toutes les inscriptions apparaissant sur le produit e vitez d utiliser Le t l phone pendant un orage Il pourrait y avoir un faible risque d lectrocution e N utilisez pas un t l phone pr s d une fuite de gaz Dans certaines circonstances une flamm che pourrait se produire lorsque l adaptateur est branch une prise de courant Ceci est un v nement fr quent associ avec la fermeture d un circuit lectrique L utilisateur ne devrait pas brancher un t l phone dans une prise de courant si le t l phone se trouve dans un environnement comportant une concentration de gaz inflammables ou ignifuges a moins de se trouver dans un endroit ou la ventilation est ad quate Une flamm che dans de tels environnements pourrait provoquer une explosion De tels environnements peuvent comprendre les endroits o de l oxyg ne a des fins m dicale
18. nswering sys 2 Press W A to select Call screening gt press SELECT 3 Press V A to choose On or Off 4 Press SELECT to save the setting 14 Answering system operation Call intercept While screening a call you can stop recording and speak to the caller by pressing 4 SPEAKER or lifting the handset Message alert You can hear the telephone beeps every 15 seconds when there are new messages if the message alert is set to On To change the setting 1 Press MENU twice to choose Answering sys 2 Press W A to select Message alert gt press SELECT 3 Press W A to choose On or Off 4 Press SELECT to save the setting Remote access You can access the answering system remotely from any touch tone telephone The preset remote access code is 500 To change the remote access code 1 Press MENU twice to select Answering system 2 Press W A to scroll to Remote code gt press SELECT 3 Use the dialing keys to enter a three digit number 4 Press SELECT to save the setting To remotely reach your answering system 1 Dial your telephone number from any touch tone telephone 2 When the answering system answers enter the three digit remote access code 15 Answering system operation 3 You can also enter the following remote commands Remote commands Press to repeat the current message during message playback Press to play the previous message during day and time playback Press twice to play
19. of emergency numbers should be performed during off peak hours such as in the early morning or late evening when the emergency services tend to be less busy 26 Part 15 of FCC rules Some telephone equipment generates uses and can radiate radio frequency energy and if not installed and used properly may cause interference to radio and television reception This product has been tested and found to meet the standards for a class B digital device as specified in Part 15 of the FCC rules These specifications are designed to provide reasonable protection against such interference in a residential installation However there is no guarantee that interference will not occur in a particular installation If this product causes interference to radio VCR or television reception when it is in use you might correct the interference with any one or all of these measures e Where it can be done safely reorient the receiving radio VCR or television antenna e To the extent possible relocate the radio VCR television or other receiver with respect to the telephone equipment e If this telephone product runs on AC power plug your product into an AC outlet that s not on the same circuit as one used by your radio VCR or television e Consult a dealer or an experienced radio TV technician for help Modifications to this product not expressly approved by the manufacturer could void the user s authority to operate the equipment
20. ronic parts so you must treat it with care e Avoid rough treatment e Place the handset down gently e Save the original packing materials to protect your telephone if you ever need to ship it Avoid water e The telephone can be damaged if it gets wet Do not use the handset in the rain or handle it with wet hands Do not install the telephone base near a sink bathtub or shower Electrical storms e Electrical storms can sometimes cause power surges harmful to electronic equipment For your own safety take caution when using electric appliances during storms Cleaning your telephone e Your telephone has a durable plastic casing that should retain its luster for many years Clean it only with a soft cloth slightly dampened with water or mild soap e Do not use excess water or cleaning solvents of any kind Remember that electrical appliances can cause serious injury if used when you are wet or standing in water If the telephone base should fall into water DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL Pull the unit out by the unplugged cords 21 Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user s manual Always follow basic safety precautions when using this product to reduce the risk of injury fire or electric shock Safety information e Read and understand all instructions in
21. s Commission FCC rules If the equipment was approved after that date it complies with the Part 68 rules and with the Technical Requirements for Connection of Equipment to the Telephone Network adopted by the Administrative Council for Terminal Attachments ACTA We are required to provide you with the following information 1 Product identifier and REN information The label on the back or bottom of this equipment contains among other things an identifier indicating product approval and the Ringer Equivalence Number REN This information must be provided to your telephone service provider upon request For equipment approved prior to July 23 2001 the product identifier is preceded by the phrase FCC Reg No and the REN is listed separately For equipment approved after that date the product identifier is preceded by US and a colon and the REN is encoded in the product identifier without a decimal point as the sixth and seventh characters following the colon For example the product identifier US AAAEQ03T123XYZ indicates the REN would be 0 3 The REN is used to determine how many devices you can connect to your telephone line and still have them ring when you are called In most but not all areas the sum of all RENS should be five 5 0 or less You might want to contact your telephone service provider for more information 2 Connection and use with the nationwide telephone network The plug and jack used to connect
22. s est utilis sans ventilation ad quate des endroits o se trouvent des gaz industriels dissolvants de nettoyage des vapeurs de gazoline etc une fuite de gaz naturel etc e N utilisez pas ce produit pr s de l eau ou lorsque vous tes mouill s Par exemple ne l utilisez pas dans des sous sols humides ou sous la douche ou pr s d une piscine d un bain d un vier de cuisine ou d une cuve de lavage N utilisez pas de liquides ou de vaporisateurs a rosol de nettoyage Si Le produit entre en contact avec du liquide d branchez imm diatement le fil t l phonique ou le cordon d alimentation Ne rebranchez pas le produit avant qu il soit compl tement sec e Installez cet appareil dans un endroit prot g o personne ne peut tr bucher sur les cordons d alimentation ou la ligne t l phonique Prot gez les cables contre les dommages ou l abrasion e Si le produit ne fonctionne pas correctement consultez la section D pannage Troubleshooting des pages 17 20 de ce guide d utilisation Si vous ne pouvez pas r gler le probl me ou si le produit est endommag consultez la section Garantie limit e Limited warranty des pages 28 29 N ouvrez pas ce produit sauf tel qu indiqu dans le guide d utilisation L ouverture du produit ou le remontage inad quat pourrait vous exposer des tensions dangereuses ou autres dangers e Cet appareil est dot d une fiche trois broches de mise la terre ou une fiche polaris e avec
23. scroll to LCD contrast gt press SELECT 2 Press W A to choose from 1 2 3 or 4 3 Press SELECT to confirm Set dial mode The dial mode is preset to touch tone dialing If you have pulse rotary service you must change the dial mode to pulse dialing before using the telephone 1 Press MENU gt press V A to scroll to Dial mode gt press SELECT 2 Press W A to choose from Touch tone or Pulse 3 Press SELECT to save your setting You can set one home area code and four local area codes 1 Press MENU gt press V A to scroll to Caller ID log gt press SELECT 2 Press W A to scroll to Set area code gt press SELECT 3 Press V A to scroll to Home area code or Local area 1 4 gt press SELECT 4 Enter the three digit area code using the dialing keys then press SELECT to save your setting gt ESS This telephone has a directory where you can store up to 25 telephone numbers and names Numbers can be up to 24 digits and names can be up to 15 characters To add a directory entry 1 Press MENU gt press V A to scroll to Directory gt press SELECT 2 Press W A to highlight Add contact gt press SELECT 3 Enter the telephone number using dialing keys gt press SELECT 4 Enter the name using dialing keys gt press SELECT To review and dial a directory entry 1 Press DIRECTORY 2 Press W A to browse through the directory gt lift the handset or press OSPE
24. stems System does not respond to remote commands e Make sure to enter your remote access code correctly e Make sure you are calling from a touch tone phone When you dial a number you should hear tones If you hear clicks the phone is not a touch tone telephone and cannot activate the answering system e The answering system may not detect the remote access code while your announcement is playing Try waiting until the announcement is over before entering the code e There may be interference on the phone line you are using Press dialing keys firmly System does not record messages e Make sure the answering system is on ANS ON 6 light on the telephone should be on e Make sure the memory of the answering system is not full e If there is a fax machine connected to the same telephone line try disconnecting the fax machine If that solves the problem consult your fax machine documentation for information on compatibility with answering systems 19 Troubleshooting Outgoing announcement is not clear When you record your announcement make sure you speak in a normal tone of voice about nine inches from the telephone Make sure there is no background noise TV music etc while recording I subscribe to a nontraditional telephone service that uses my computer to establish connections and my telephone doesn t work Make sure your computer is powered on Make sure your Internet connection is working properly Make
25. sure that the software is installed and running for your nontraditional telephone service Make sure to plug your USB telephone adapter into a dedicated USB port on your computer Do not plug it into a multiple port USB hub USB splitter that is not powered In a few rare instances the USB port on your computer may not have enough power Try using a USB hub with its own external power supply If you are using a firewall it may prevent access to your nontraditional telephone service provider Contact your service provider for more information I ve set my LCD language to Spanish or French and don t know how to change it back to English Do the following in the order listed to reset the LCD language back to English 1 Press CANCEL repeatedly to ensure that the telephone is in idle mode 2 Press MENU SELECT once 3 Press CALL LOGY five times then press MENU SELECT 4 Press CALL LOGY or DIRECTORY A to highlight English 5 Press MENU SELECT twice You hear a confirmation tone Common cure for electronic equipment If the telephone does not seem to be responding normally do the following in the order listed 1 Disconnect the power to the telephone 2 Wait a few minutes 3 Connect power to the telephone 4 Wait for the telephone to reestablish its connection Allow up to one minute for this to take place 20 Maintenance Taking care of your telephone e Your corded telephone contains sophisticated elect
26. the previous message during message playback Press to stop message playback Press to skip to the next message during playback Press to play the announcement Press to record a new announcement Press to turn the answering system on or off 4 Hang up to end the call Message Guard The answering system protects the recorded messages from being lost in the event of a power failure Message Guard is a registered trademark of Advanced American Telephones 16 Troubleshooting If you have difficulty with your telephone please try the following suggestions For Customer Service visit our website at www telephones att com or call 1 800 222 3111 In Canada dial 1 866 288 4268 My telephone doesn t work at all Make sure the power cord is securely plugged in Make sure you plug the telephone line cord securely and firmly into the telephone and the telephone wall jack Reset the telephone Unplug the electrical power Wait for approximately 15 seconds then plug it back in Allow up to one minute for the telephone to reset The display shows No line cannot get a dial tone Try all the suggestions as mentioned above If the previous suggestions do not work disconnect the telephone line cord from your telephone and connect the telephone line cord to another telephone e If there is no dial tone on that other telephone either your telephone line cord may be defective Install a new telephone line
27. the user s manual Observe all markings on the product e Avoid using a telephone during a thunderstorm There might be a slight chance of electric shock from lightning e Do not use a telephone in the vicinity of a gas leak Under certain circumstances a spark may be created when the adapter is plugged into the power outlet This is a common event associated with the closing of any electrical circuit The user should not plug the phone into a power outlet if the phone is located in an environment containing concentrations of flammable or flame supporting gases unless there is adequate ventilation A spark in such an environment could create a fire or explosion Such environments might include medical use of oxygen without adequate ventilation industrial gases cleaning solvents gasoline vapors etc a leak of natural gas etc e Do not use this product near water or when you are wet For example do not use it in a wet basement or shower or next to a swimming pool bathtub kitchen sink or laundry tub Do not use liquids or aerosol sprays for cleaning If the product comes in contact with any liquids unplug any line or power cord immediately Do not plug the product back in until it has dried thoroughly e Install this product in a protected location where no one can trip over any line or power cords Protect cords from damage or abrasion e If this product does not operate normally read Troubleshooting in this user s manual on pag
28. this equipment to the premises wiring and the telephone network must comply with the applicable Part 68 rules and technical requirements adopted by ACTA A compliant telephone cord and modular plug is provided with this product It is designed to be connected to a compatible modular wall jack that is also compliant An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines see installation instructions in the user s manual This equipment may not be used with coin telephone lines or with party lines If you have specially wired alarm dialing equipment connected to your telephone line ensure the connection of this equipment does not disable your alarm equipment If you have questions about what will disable the alarm equipment consult your telephone service provider or qualified installer 3 Repair instructions If this equipment is malfunctioning it must be unplugged from the modular wall jack until the problem has been corrected Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents For repair procedures follow the instructions outlined under the limited warranty 4 Rights of the telephone service provider If this equipment is causing harm to the telephone network the telephone service provider may temporarily discontinue your telephone service The telephone service provider is required to notify you before interrupting service If advance notice is not
29. une lame plus large elle risque de ne pas s ins rer dans une prise de courant non polaris e Ne tentez pas d outrepasser les broches Si la fiche ne s ins re pas dans votre prise de courant celle ci doit tre remplac e par un lectricien MISE EN GARDE N utilisez seulement l adaptateur inclus avec ce produit Pour obtenir une pi ce de rechange visitez notre site Web au www telephones att com ou composez le 1 800 222 3111 au Canada composez le 1 866 288 4268 23 For C UL compliance Sp cifiquement en rapport avec les t l phones avec fil e Alimentation lectrique La base de ce t l phone sans fil doit tre branch e une prise de courant lectrique fonctionnelle La prise lectrique ne doit pas tre contr l e par un interrupteur mural Les appels ne peuvent pas tre effectu s partir du socle du t l phone socle du casque d coute n est pas branch e si elle est hors fonction ou si le courant lectrique est coup e Adaptateur de courant L adaptateur de courant est con u pour tre orient verticalement ou install sur le plancher Les broches ne sont pas con ues pour se maintenir en place si la fiche est branch e dans une prise de courant au plafond sous la table ou sous une armoire CONSERVEZ CES INSTRUCTIONS 24 FCC and ACTA information If this equipment was approved for connection to the telephone network prior to July 23 2001 it complies with Part 68 of the Federal Communication
30. ure is not covered by this limited warranty or proof of purchase does not meet the terms of this limited warranty the manufacturer notifies you and requests that you authorize the cost of repair prior to any further repair activity You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this limited warranty 6 What must you return with the PRODUCT to get warranty service You must a Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty and b Include a valid proof of purchase sales receipt identifying the PRODUCT purchased PRODUCT model and the date of purchase or receipt and c Provide your name complete and correct mailing address and telephone number 7 Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT amp T branded PRODUCT It supersedes all other written or oral communications related to this PRODUCT The manufacturer provides no other warranties for this PRODUCT The warranty exclusively describes all of the manufacturer s responsibilities regarding the PRODUCT There are no other express warranties No one is authorized to make modifications to this limited warranty and you should not rely on any such modification State Provincial Law Rights This warranty gives you specific legal rights and you
Download Pdf Manuals
Related Search