Getinge AER Range - Approved Business
Contents
1. GELINGE GETINGE GROU GETINGE AER RANGE A SAFER WAY TO REPROCESS ENDOSCOPES Always with you ENDOSCOPE REPROCESSING FAST AND ERROR PROOF As the use of endoscopes increases so does the risk of infections linked to endoscope reprocessing This is indeed an area where zero tolerance towards cross contamination must be maintained And at Getinge we are convinced that there s only one way to do this Think SYSTEM not PRODUCT The Japanese word poka yoke stands for a concept aiming at making errors impossible When we designed our new range of AERs Automated Endoscope Reprocessors we applied poka yoke thinking We built it into the product and into the workflow around the products We applied a system approach in the way that we always do at Getinge the way of thinking that has made us the world leader in disinfection and sterilisation The Getinge range of AERs consists of two error proofing machines the Getinge ED FLOW AER and the Getinge POKA YOKE AER Both of them are unique And both of them represent a breakthrough for a more all embracing approach to infection control in endoscope reprocessing SAFER FASTER MORE VERSATILE AND EASIER TO USE Here are some of the main features and benefits The fastest and most efficient cycles No other AER can run such an extensive program confor ming to national and interna tional regulations in such a short time just 22 minutes Hands2. AER and is made of composite conceal wiring cables etc material 7 Connector holder system 8 Printer holder The printer holder gives easy access to Also mounted on the wall rail the connector holder transfers clean connec print outs once the process is finished tors back to the dirty side for storage Mounted on the wall rail and re use The connectors are safely and hygienically transferred in a practical Available for POKA YOKE only disposable plastic bag 3 Waste trolley For general waste such as gloves brushes etc this trolley is positioned under the pre treatment unit for easy access Foot pedal opening 6 Chart holder Mounted on the wall rail the swivel chart holder keeps instruction leaflets close at hand connection charts user instructions etc N 9 Clean table The clean table serves as a worktop for assembly of processed flexible endo scopes Made of composite material 23 24 EASY INSTALLATION AND COST SAVING SERVICE SOLUTIONS The Getinge AERs are designed to be very easy to install and service Putting them in place and connecting to water drain and electricity is GET i i GETING GAUP quick and easy When it comes to the Getinge POKA YOKE AER the choice of unloading mode can be made at installation by selecting in the software either same side unloading or opposite side unloading This setting can also be easily changed later for example if a new
3. AERs identify the endoscope and display help for the operator on the screen Also each tube for the connection of internal channels has a different colour to ease the connection Customised and skillfully engineered endoscope connection kits are available for usual endoscope models AER Endoscope manufacture UNE Endo cope dal bro he FB 15P Endosco lel EN Endoscope family GP Poka Yoke Recipe no GETINGE POKA YOKE 04 GETINGE POKA YOKE AER Endoscope manufacture Olympus ndoscope model duodenoscope TJF 240 Endoscope family GPY OLY I Poka Yoke Recipe no 18 5 Air GPY WA 02 mn 6 Auxilliary Channel GPY AX 03 L LeakTest GPY L 03 o HandlePlug LFC S 01 B The rotating nozzles deliver the washing disinfection and rinse fluids at a high pressure in the chamber and on the exterior of the endoscope Every endoscope channel is individually connected to one of the six available snap on connections in order to clean and disinfect the internal channels of the endoscope A LED panel gives you information about the cycle status at a glance i z y f F Di 4 T A The POKA YOKE AER features a unique design holder that makes it easier to load the endoscope By putting some space between the bottom of the chamber and the endoscope the holder also ensures that the disinfectant comes in contact with all external surfaces of the scope The endoscope is loaded
4. Excellence for endoscope reprocessing in Toulouse France This site has been manufacturing AERs as well as related accessories and equipment since 1993 A new assembly line for the AERs has been built according to lean manuacturing principles Proven scientifically tested technology The Getinge AERs include proven scientifically tested technology on endoscope channel irrigation systems alarms regulation and monitoring of cycle parameters chemical combination efficacy compatibility and much more Getinge POKA YOKE AER and Getinge ED FLOW AER conform to the following norms amongst others e European Machine directive 2006142 EC and Medical Device directives 93 42 CE e EN ISO 15883 1 standards e EN ISO 15883 4 standards e DGS 138 Guide CTIN 11 2003 France The resuits of tie tabs performed in RITO SGTAMANDE Sberatory Marseilles and the data provided Ey phe en wa eo director manufacturer tere Getimpe Paka Vor compii data ganire pha z ETRAGT POMCA WOAT AIR GI TIaMgGE Sqtware version 1 iting the THC det and far APT AION POXA VONT distnfectent i omien with al requirements of EN ISO MESA 00 rl SCH FD erg oO Cama di a eres Lio ur e ll PS kp the Endoscope compatibility testing An independent laboratory endocopy specialist con ducted an extensive testing of endoscope compatibility where endoscope materials and parts were exposed to the maximum dosing of disinfectant possible in the Getinge AERs and s
5. Verification Library which measures each channel separately and warns if there is the slightest deviation compared to predefined values This is something that other AERs do not offer And it is priceless for those who appreciate peace of mind when it comes to patient safety It works like this 1 The AER compares the measured pressure to pre defined values that have been determined through our partnership with the main manufacturers of endoscopes in order to assure that the cleaning and disinfection of each channel is correctly performed 2 During operation the AER automatically compares the flow of each channel of each endoscope with the known reference values If there is a deviation in the flow rate during the cycle the AER notices it and warns the user by means of an alarm message This way you know that continuous safety is always assured The CVL functions as a quality assurance letting you feel confident that everything works as It should on a day to day basis CVL availability is dependent on the endoscope design gt Normal pressure Everything works correctly and the flow is normal gt O High pressure CVL warns The pressure is high but the flow through the channel is very low Possible cause obstruction due to bio film build up or damage D Low pressure CVL warns The pressure is very low still the water and chemicals seems to flow totally unhindered Possible cause the endoscope is
6. free operation both on loading and unloading sides means that you do not have to touch any panels or buttons with dirty hands Open the AER with the foot pedal let the RFID choose the right cycle and the AER starts automa tically Optimum traceability is built in Thanks to RFID tags information on operators and endoscopes is automatically stored and printed along with the cycle data And the Getinge software helps to manage all data SETINGE Unique handling of chemicals The Aperlan POKA YOKE Agent A amp Agent B disinfectant containers can only be placed in one way the right one The machine will also pierce and inject them so there is no operator exposure whatsoever Two separate chambers the Getinge ED FLOW AER is the world s first true pass through AER with two asynchronous chambers so you can have a faster smarter more versatile and more efficient flow of flexible endoscopes through your reprocessing department The pass through design of the Getinge ED FLOW AER allows a true physical barrier between soiled and clean sides Each chamber has two doors one for loading and the other for unloading the endoscopes 26 minutes when a second wash phase is required France The unique lid of the Getinge POKA YOKE AER lets you have a dirty to clean workflow even if your reprocessing room is small This is important in reducing cross contamination risks To secure maximum i
7. into the Getinge ED FLOW AER on a loading tray You can prepare the endoscope on the tray on a work surface and then easily carry it over to the AER gt The ED FLOW AER features communication windows over each door to allow visual contact between people on both sides The interlocking doors of Getinge ED FLOW AER and Getinge POKA YOKE AER ensure that the endoscope cannot be unloaded on the clean side unless a complete process has been successfully carried out It is very easy to connect the channels to the swinging arm connections module of Getinge ED FLOW AER And when unloading from the other side you just swing the module towards you for easy access to the connectors 15 16 A SAFER WAY TO HANDLE DETERGENTS NO EXPOSURE AT ALL We made our AERs extra easy to use in everyday work And we ve also simplified changing detergent and disinfectant containers We have made it easier and much safer We made it impossible to make errors and minimised any exposure to chemicals High efficiency detergent Both Getinge ED FLOW AER and Getinge POKA YOKE AER use the detergent Getinge Poka Yoke DLC which is an alkaline type detergent with well documented efficiency for protein and biofilm removal The 3 litre containers last for 60 cycles APERLAN for best disinfection efficacy The disinfectant used by both Getinge ED FLOW AER and Getinge POKA YOKE AER is the peracetic acid based APERLAN POKA YOKE delivered in two
8. not connected As decontamination in an AER is a terminal final process prior to use on a patient you have to be absolutely sure that the disinfection has been 100 successful Thanks to the CVL system you can rest assured 13 14 EASY TO USE WITH ALL ENDOSCOPES CONNECTOR DATABASE ON THE WEB The Getinge Infection Control Group knows a thing or two about safe reprocessing Being the world leader in disinfection and sterilisation it is even tempting to claim that we know more about it than anyone So both you and the manufacturer of your endo scopes can rest assured whatever the type or brand a Getinge AER is tested to provide full compatibility and efficacy Extensive testing of different endoscopes Both Getinge ED FLOW AER and Getinge POKA YOKE AER are developed for and extensively tested with different types and brands of flexible endoscopes They handle scopes for amongst others upper and lower Gl endoscopy cystoscopy hysteroscopy bronchos copy and rhinolaringoscopy May vary from country to country Tested according to local regulations GETINGE POKA YOKE AER Customer ENT 11101 RP GPY STO Pr a ai LA 4 hn tte Lo oor LeakTest GPY L 01 GPY SU 01 GPY B 03 GPY W 01 GPY A 01 Auxilliary Channel GPY AX AX 01 HandlePlu 9 GPY L 02 o HandlePlug LFC S 05 Easy to connect any type of endoscopes previously identified The Getinge
9. plus an extra one for complete removal of detergent before disinfection Disinfection phase The standard program features a 5 minutes minimum contact time perfor med at 37 C Triple rinses The final rinse uses 0 1 um filtered water to guarantee the disinfected status of the endoscope Programmable thermal self disinfection program The self disinfection program uses thermal disinfection to reduce risk of contamination By pre setting the program for automatic start you know that the AER is ready for use for example in the morning when you arrive Should the endoscope passes the automatic initial leak test a continuous air overpressure is maintained to protect the endoscope s internal components 14 minutes when only one chamber running 16 minutes when 2 chambers running UNIQUE EXTRA SAFETY THANKS TO THE CHANNEL IRRIGATION SYSTEM Endoscopes are not like other medical instruments Disinfecting them is more complicated due to the complexity of the different internal channels How do you assure that these channels the inside of which no one will ever see have been completely high level disinfected and are 100 safe to use on the next patient after each reprocessing cycle How can you be completely sure that each channel is 100 functional and that there is no obstruction due to bio film build up threatening the scope s perfomance There is only one way The unique CVL system Channel irrigation
10. Ao 3000 Machine disinfection chemical Y Y Y User manual J Should the endoscope pass the automatic initial leak test a continuous air overpres sure is maintained to protect the endoscope s internal components TECHNICAL DATA GETINGE POKA YOKE AER GETINGE POKA YOKE AER GENERAL FEATURES Number of endoscopes 1 Blue tinted glass lid can open to both sides Y Full compliance with EN ISO 15883 1 Y Full compliance with EN ISO 15883 4 Y SPRAYING 8 CVL SYSTEM 4 rotating nozzles 360 Y 6 internal channel connections colour coded Y CVL system J MACHINE DISINFECTION Thermal disinfection cycle Y Chemical self disinfection Y ENDOSCOPE DISINFECTION CYCLES Permanent leak tests Y Max number of channel irrigation tests during full cycle 4 Working temperature ore Automatic mixing of disinfectant inside machine J Standard time of contact with disinfectant 5 min Adjustable final air blowing time Y CONSUMABLES Disinfectant Aperlan Poka Yoke Agent A 5 kg box of 2 containers Aperlan Poka Yoke Agent B 5 kg box of 2 containers Detergent Getinge Poka Yoke DLC 3 litres box of 4 containers Should the endoscope passes the automatic initial leak test a continuous air overpressure is maintained to protect the endoscope s internal components CONNECTION OF UTILITIES 230V 1ph 10 26A ph 400V Sph n 10 8A ph Electrical connections consumption Water supply To national guidelines and
11. START AND UNLOAD WITHOUT TOUCHING Just open it with the pedal and let the radio frequency sensor register the user and endoscope ID and automatically launch the right cycle Hands free operation it s smart smooth and failsafe Infection control is about seeing the whole picture and as far as possible ensuring the risk of human errors is eliminated For example how can you avoid the situation where a nurse touches a handle panel start button or barcode reader after holding a dirty endoscope leaving micro organisms waiting to be picked up when unloading the clean endoscope The answer is hands free operation The first part is basic a foot pedal After the manual pre cleaning the operator presses the pedal to open the AER No need to touch any handles or buttons After successful decontamination the door can only be opened with the pedal on the clean side Then the best part RFID identification and automatic start When the operator has placed the endoscope into the AER its RFID tag is automatically identified by the machine s RFID antenna RFID Radio Frequency Identification The operator also has a RFID tag for automatic user identification When the foot pedal is pressed the AER will close the lid door and automatically choose the right cycle for that endoscope based on the RFID tag information and start Smooth simple and failsafe This procedure has several benefits Firstly it is easy and saves ti
12. erform high numbers of procedures The all the latest standards to give you peace of mind ED FLOW offers excellent capacity with its two separate chambers and short cycles and for larger reprocessing Built into the wall departments it is of course also possible to install several Getinge ED FLOW AER is a true pass through solution that Getinge ED FLOW AERs in a row is the AER can be built into a wall to create a true physical With the world s first true pass through AER with two barrier between soiled and clean sides Loading and unloading separate asynchronous chambers you get a faster more in different rooms is definitely the preferred solution wherever versatile and more efficient flow of flexible endoscopes possible in order to minimize the risk of cross contamination 18 Unique asynchronous chambers With double chambers operating independently you get a better workflow and greater flexibility Just load the soiled endoscope into one of the chambers as soon as it is ready for decontamination When the next one arrives you can load it directly into the second chamber without having to wait for the first endoscope s cycle to finish and start the reprocessing Unlike some other one chamber AERs you don t have to wait until you have two scopes to reprocess before launching the cycle System approach Getinge ED FLOW AER has a very small footprint a depth of only 40 cm on each side when fitted into a wall and can be
13. erm commitment and global presence Getinge Always with you GETINGE GROUP is a leading global provider of products and systems that contribute to quality enhancement and cost efficiency within healthcare and life sciences We operate under the three brands of ArjoHuntleigh GETINGE and MAQUET ArjoHuntleigh focuses on patient mobility and wound management solutions GETINGE provides solutions for infection control within healthcare and contamination prevention within life sciences MAQUET specializes in solutions therapies and products for surgical interventions interventional cardiology and intensive care 1922 ENG 2011 11 G teborgstryckeriet We reserve the right to make technical and construction changes
14. hat you get with an AER from Getinge Data Capturing in the endoscope reprocessing unit With T DOC EndoCycle you can document and capture essential process parameters such as endoscope ID User ID selected AER machine number program type and detergent disinfectant exposure T DOC EndoCycle also provides first level traceability by linking Patient ID and or to the disinfection process In this way the history of your endoscopes is documented Complete control of your endoscopes with total traceability T DOC EndoTrace offers you enhanced endoscope repro cessing enabling you to handle all aspects of endoscope reprocessing management You are ensured total traceability as T DOC registers endoscopes and button valves throughout their life span and links them to all processes actions and people they encoun ter Thereby you always have a documented record that the correct processes and procedures were followed In addition you always know where your endoscopes are when you need them Automatic data collection with RFID tags Using RFID tags both endoscope and operator are automatically identified so the correct ID information is collected The AER control system records cycle number date endoscope ID type of cycle user ID cycle start and stop time 12 AN EXTENSIVE PROGRAM COMPLETED IN ONLY 22 MINUTES The standard program for the Getinge AERs features continuous leak tests four flow tests and three f
15. howed no deterioration Endoscope connection We have developped the appropriate connection kits for the main endoscopes of the major manufacturers Our kit are certified MEDICAL DEVICE CLASS Scientific efficacy testing These tests were also performed by an independent laboratory The tests included e Biocidal activity of the APERLAN POKA YOKE e Bactericidal fungicidal mycobactericidal virucidal sporicidal according to EN or ISO standards on disinfectants Bactericidal and sporicidal activity of the disinfectant according to EN ISO 15883 4 standards Cleaning efficacy tests according to ISO 15883 4 Endoscope disinfection cycle efficacy tests according to EN ISO 15883 4 standards Self disinfection cycle efficacy tests according to EN ISO 15883 4 standards including water treatment unit Applies to EN ISO 15883 1 amp 15883 4 please check conformity to local requirements Please contact your local getinge dealer to check availability of the required kit 25 26 TECHNICAL DATA GETINGE ED FLOW AER GETINGE 1100mm GETINGE ED FLOW AER GENERAL FEATURES Number of endoscopes 2 endoscopes in 2 separate chambers Glass doors true pass through for building into a wall Y Full compliance with EN ISO 15883 1 Y Full compliance with EN ISO 15883 4 Y SPRAYING 8 CVL SYSTEM 4 rotating nozzles 360 per chamber 6 internal channel connections colour coded Y CVL sys
16. inal rinses It s been designed to meet all regulations including the ones in countries where demands have increased following the emergence of prion diseases No other machine can complete so many phases in such a short time As a result the Getinge AERs will complete a cycle fully validated in accordance with the EN ISO 15883 1 and EN ISO 15883 4 standards in only 22 minutes This means for example that the ED FLOW will process as many as 6 scopes in just over an hour On top of this you can save time thanks to the smart ergonomic design of the AERs Loading scopes is very easy and connecting them is really fast All the time you have a good overview of the chamber which contributes further to a smooth and simple workflow STANDARD CYCLE DESCRIPTION INITIAL LEAK TEST FLUSHING WASHING AND RINSING RINSING DISINFECTION FINAL RINSING PURGE WITH AIR Extensive rinses Initial flush phase Removes any pretreat ment chemical and removes gross contamination Special program for clean endoscopes saves time A shorter 14 minutes disinfection cycle is available for processed endoscopes that have been stored too long to use without renewed reprocessing To be used according to local regulations 26 minutes when a second wash phase is required France Wash phase Ensures that all proteins are removed Optional 2nd washing and rinsing phase can be programmed Every wash phase is followed by a rinse
17. me for the operator No data to be entered just load the endoscope and press the pedal Secondly it reduces the risk of human errors Only the correct cycle for that particular endoscope can be used The AER cannot be started or unloaded without storing the correct user information Thirdly it reduces the risk of cross contamination No buttons to touch to open or close the lid select a cycle enter user information start the AER or unload the clean endoscope It couldn t be simpler or safer 10 DATA CAPTURING AND TOTAL TRACEABILITY TAKE COMMAND OF YOUR ENDOSCOPES As a clinic or department using endoscopes the responsibility is normally yours to ensure that important procedure data is captured and documented Therefore you ll need an AER with a fail safe traceability system Ideally an AER captures and stores data automatically and therefore eliminates risks of human error With a Getinge AER you can select from two endoscope reprocessing solutions or a combination of the two depending on your requirements T DOC EndoCycle offers data capturing from Getinge AER machines while T DOC EndoTrace gives you total traceability throughout the production cycle With a combination of T DOC EndoCycle and T DOC Endol race you thus have the optimal solution to take command of your endoscopes An AER that helps you ensure traceability of your endoscopes and you can focus on providing quality care while spending less time on paperwork Exactly w
18. nfection control one must consider the whole workflow That is why we offer not only an endoscope reprocessor but a complete reprocessing system MODERN INFECTION CONTROL THERE S ALWAYS TWO SIDES TO IT Modern infection control is based on the barrier principle a clear separation of dirty and clean areas Both Getinge ED FLOW AER and Getinge POKA YOKE AER offer such a separation but in different ways Getinge ED FLOW AER a true pass through solution The Getinge ED FLOW AER is a true barrier system intended to be built in a wall in order to separate the dirty and the clean areas with a physical barrier Interlocking doors ensure that only scopes that have run through a complete and approved cycle can be unloaded through the door on the clean side If an error during the process is discovered the AER will only open up on the dirty side The two way lid design of the Getinge POKA YOKE AER helps to separate dirty and clean areas reducing the risk of cross contami nation Getinge POKA YOKE AER a two way lid solution In smaller endoscopy clinics building the AER into a wall may not be a viable solution The Getinge POKA YOKE AER solves the problem by featuring a lid that allows loading and unloading from opposite sides Manual pre treatment is performed on the dirty side drying and storage on the clean side In this way disinfected endoscopes never have to be handled in the same area as dirty ones LOAD
19. positioned in many ways in the reprocessing department In order to ensure the best possible hygienic workflow we have also developed a range of accessories to create a complete reprocessing system GETINGE POKA YOKE AER A SYSTEM APPROACH OFFERING UNIQUE BENEFITS FOR SMALLER CLINICS Getinge POKA YOKE AER is the ideal solution for Manual pre treatment in a dedicated part of the room smaller endoscopy clinics Here there is often not enough After the initial manual cleaning and flushing of channels has space to build a machine into a wall in order to separate been performed in the procedure room the endoscope is dirty and clean areas Thanks to the smart lid opening to brought into the reprocessing room Here there is a the opposite side for unloading the Getinge POKA YOKE dedicated area for continued manual cleaning on one side of AER allows a soiled to clean workflow even in a small the Getinge POKA YOKE Equipment in this area includes room sinks spray guns automated water tap preparation area shelf for brushes waste bin etc 20 The AER as a semi divider of the room Ideally the AER is placed away from the wall by a special wall mounted work bench to function as a semi divider in the room However there are several options for positioning it that enable a hygienic workflow see examples on the right Shelves for endoscope connectors and adaptors and a stand for a flipchart are examples of accessories that a
20. re conveniently close to the AER There are various ways of positioning the Getinge POKA YOKE in the reprocessing room Drying and storage on the clean side When the reprocessing cycle is completed the endoscope is unloaded on the clean side In this area you need a storage cabinet for sterile goods a printer for process data a wall mounted work bench for final assembly of the endoscope and an endoscope storage cabinet For details on all accessories see the following pages 21 22 ACCESSORIES FOR THE BEST POSSIBLE WORKFLOW Getinge offers everything you need to ensure the best possible hygienic workflow in your reprocessing department From endoscope connector kits to furniture for a smooth workflow Here are examples of accessories available For more information please visit www getinge com i y a r gt zE e 1 Pre treatment unit 2 Chemical storage trolley For manual pre treatment of endo For storage of 2 2 disinfectant scopes before the process Made of containers and 3 DLC detergent composite material containers The trolley is also lockable to the pre treatment unit for safe storage 5 Wall rail Made of sturdy extruded aluminium 4 U shaped transfer table for the Getinge POKA YOKE AER Helps to serve as a barrier between the the wall rail serves as a multi purpose dirty and clean sides Follows the holder Can be used to contain shape of the Getinge POKA YOKE
21. reprocessing room layout allows the dirty to clean workflow that was not possible at installation Allthe training support you may need We offer operator training to ensure that the AER can be optimally utilized to its full potential To prevent breakdowns and minimize the risk of undesired downtime training is also available for your technician at the unit The training sessions can be held either at your facility or at the Lancer Getinge Academy Preventive maintenance and validation packages We also offer a range of preventive maintenance service contracts as well as validation and training packages which can be tailored to your own requirements e Installation to agreed services e Commissioning e Installation amp Operational Testing IOT validation to the EN ISO 15883 1 and EN ISO 15883 4 standards e Performance Qualification PQ validation testing to the EN ISO 15883 1 and EN ISO 15883 4 standards e Servicing and service contracts e Routine test to the EN ISO 15883 1 and EN ISO 15883 4 standards avallability of services to be checked locally CONFORMS TO ALL NORMS AND STANDARDS AND THOROUGHLY TESTED IN EVERY WAY Our Centre of Excellence for endoscope reprocessing in Toulouse France Manufactured to the highest standards Thorough experience and well established expertise are prerequisites for reliable production of AERs The Getinge ED FLOW AER and the Getinge POKA YOKE AER are manufactured at our Centre of
22. requirements Minimum softened water lt 7 DH Incoming water filter 0 1 um Y Water consumption per cycle phase 3 25 litres HEPA filter for incoming air Y Net weight 150 kgs CONTROL VALIDATION TRACEABILITY Industrial PLC system Programmable Logic Controller Y Printer Program for identification of endoscopes and CVL identification RFID identification of endoscope RFID identification of user Automatic dosing of detergent Automatic dosing of disinfectant Independent cycle parameters monitoring system Cycle documentation system Ethernet IP address for Remote S NENNT N o S INCLUDED FOC ON DELIVERY Endoscope RFID tags 3 pcs User RFID tags 2 pes Machine disinfection tag Ao 600 Y Machine disinfection tag Ao 3000 Y Machine disinfection chemical Y User manual Z 27 Getinge Infection Control AB P O Box 69 SE 305 05 Getinge SWEDEN Phone 46 10 335 00 00 info getinge com GETINGE GETINGE GROUP www getinge com COMPLETE SOLUTIONS FOR INFECTION CONTROL Getinge is the world s leading provider of solutions for effective cleaning disinfection and sterilization in the healthcare and life science sectors We are dedicated to helping our customers provide better care at a lower cost We do this by offering well thought through and customized solutions This means that we are with our customers all the way from architectural planning and education to traceability and support with complete solutions long t
23. separate 5 kg containers Agent and Agent B The two agents are mixed inside of the machine and last for about 80 cycles APERLAN POKA YOKE Agent A amp Agent B is used as single shot i e it is not recycled reused Disinfectant containers can only be placed in one way the right way Since the bottles of Agent A and B have different shapes they can only be positioned in the place allocated for them No room for human errors The containers do not have to be opened The bottles of Agent A and B are pierced inside the AER This means that the operator will not be exposed to any possible health hazardous chemicals Safer for the operator and no chemical fumes in the repro cessing room Warning when container levels are low The level of detergent and disinfectant is constantly monitored by the control system and can be displayed on the operator screen The system warns if levels are low no risk of running out of chemicals during a cycle The AERs feature a built in storage space for the detergent and the disinfectant containers The large double door makes it easy to access the containers and replace them GETINGE ED FLOW THE WORLD S FIRST AER WITH TWO ASYNCHRONOUS CHAMBERS Getinge ED FLOW AER is the perfect solution for larger through your reprocessing department Into the bargain endoscopy departments where you may have 10 endoscopes you get outstanding infection control and compliance with or more and p
24. tem Y MACHINE DISINFECTION Thermal disinfection cycle Chemical self disinfection Y ENDOSCOPE DISINFECTION CYCLES Permanent leak tests Max number of channel irrigation tests during full cycle 4 Working temperature SCG Automatic mixing of disinfectant inside machine J Standard time of contact with disinfectant 5 min Adjustable final air blowing time Y Disinfectant Aperlan Poka Yoke Agent A 5 kg box of 2 containers Aperlan Poka Yoke Agent B 5 kg box of 2 containers Detergent Getinge Poka Yoke DLC 3 litres box of 4 containers 1969mm GETINGE NGE lt 1220mm a CONNECTION OF UTILITIES Electrical connections consumption 400V 3PH N 10 16A ph Water supply To national guidelines and requirements Minimum softened water lt 7 DH Compressed air 5 to 7 bars Incoming water filter 0 1 um Y Water consumption per cycle phase 3 25 litres HEPA filter for incoming air Y Net weight 397 kg CONTROL VALIDATION TRACEABILITY Industrial PLC system Programmable Logic Controller Y Printer Y Program for identification of endoscopes and CVL identification Y RFID identification of endoscope Y RFID identification of user Y Automatic dosing of detergent Y Automatic dosing of disinfectant Y Independent cycle parameters monitoring system Y Cycle documentation system Y Ethernet IP address Y INCLUDED FOC ON DELIVERY Endoscope RFID tags 3 pcs User RFID tags 2 pes Machine disinfection tag Ao 600 Machine disinfection tag
Download Pdf Manuals
Related Search