Owners Manual
Contents
1. empty the tank or the tank is incorrectly posi tioned 3 Press the ON Stand by button Dehumidifying Mode The display will show on the left side the room humidity level ex faa 53 and on the right side the display will show the degree of humidity you want to reach ex 58 8 Press the or button to set the desired humidity level 30 means a dry environment 80 a humid environment Press the S to select the fan speed MIN MAX If you select MAX the appliance will Operate to the maximum speed If you select MIN the appliance will operate to the minimum speed and the noise levels will be reduced Press button to display the Temperature on the LCD display On the left side the display will show first the F and then the temperature in C After few seconds the display will automatically show the humidity level When the appliance reaches the humidity set point the appliance will automatically stop working but the fan will work at the minimum speed As soon as the humidity increases above the set point the appliance will automatically resume dehumidification operation Continuous Dehumidifying Function In order to operate the continuous dehumidifying function press button untill the display will show With this function the appliance will operate con tinuosly TIMER How to program the delayed start function From the OFF Position 1 Wit2. increase by 1 hour increments 5 Pump button only in some models When you press the Pump button the display will show PUMP If the display shows PUMP blinking it means that the pump is not operating correctly button TIMER button 6 Timer button If you press the TIMER button the display will show the hours after which you want the applian ce to switch OFF or ON Once the timer is set the user can no longer adjust the RH Display Meaning of the codes or symbols which may be displayed Indicates that the appliance is in standby mode amp Tank warning symbol If the water tank is full improperly positioned or missing the tank warning light will start blinking An alarm will sound until the tank is either emp tied or correctly positioned into place D Defrosting indicator symbol With an ambient temperature of less than 59 F 15 C the appliance performs defrosting cycles While the appliance is defrosting the defrosting symbol comes on and remains on until defrosting is completed This symbol will also be displayed if the unit is switched on immediately after being turned off The unit requires 3 minutes before it can function again www sylvane com 1 800 934 9194 MODE SELECTION 1 Plug the appliance into a an outlet 2 the display will show to indicate that the appliance is in stand by and ready for use If the display shows D it s necessary to
3. and disposal must be carried out by qualified personnel only R410A GWP 1975 e The materials used for packaging can be recy cled You are therefore recommended to dispose of them in special differentiated waste collection containers e Do not use the appliance outdoors e Do not use the appliance in laundry rooms Instructions Read these instructions carefully before installing andor using the appliance Keep these instructions If the appliance is transferred to other owners they should also be given these instructions e Failure to respect the instructions may result in injury or damage to the appliance The manufacturer is not liable for damage deriving from failure to follow these instruc tions Electrical connections Before plugging the appliance into the outlet check that e The outlet power supply corresponds to the working voltage indicated on the rating plate e The power outlet and electrical circuit are adequate for the appliance e The power outlet matches the plug If this is not the case have the plug replaced by a qua lified electrician e The outlet is properly grounded INSTALLATION Position the appliance in the room to be dehumi dified A free space of at least 2 ft 61 cm must be left at the front of the dehumidifier so as not to block the air outlet For efficient ventilation a space of about 2 4 in 5 10 cm should be left at the back of the appliance The condensate can be drained
4. the unit 9 Pump tube to be used at the front of the unit 10 Connecter for PUMP draining first remove stopper 11 Wheels www sylvane com 1 800 934 9194 INTRODUCTION Thank you for choosing a De Longhi product Take a couple of minutes to read these instruc tions This will avoid danger or damage to the appliance Symbols used in these instructions These symbols draw your attention to important warnings It is vital to respect these warnings Failure to do so may result in electric shock serious injury burns fire or damage to the appliance A Danger Failure to observe this warning may result in life threatening injury by electric shock AN Important Failure to observe this warning may result in injury or damage to the appliance g This symbol draws your attention to important recommendations and informatio Problems and repairs In the event of problems first try and resolve them by reading the information given in the Troubleshooting section on page 9 If the appliance requires repair always contact a Center authorized by the manufacturer Always insist on original spare parts Repairs car ried out by unauthorized personnel may be dan gerous and invalidate the guarantee IMPORTANT SAFEGUARDS Fundamental safety warnings A Danger This is an electrical appliance it is therefore important to respect the following safety warnings e Do not touch the appliance with wet hand
5. I is displayed Symbol PUMP is displayed CAUSE The filter is blocked The temperature or humidity in the room are too low The room is too big for the dehumidifying power of the appliance Too many sources of humidity in the room pots of boiling water etc The humidy set point is too high The safety device has tripped The tank is missing The tank is full The tank is incorrectly positioned The temperature in the room is very low One of the sensors on the appliance is faulty The condensation discharge pump is missing GB SOLUTION Clean the filter In certain conditions it is nor mal for the appliance not to dehumidify in certain cases it is recommended to heat the environment Decrease the humidity set point Wait for 3 minutes to pass Replace the tank Empty the tank Position the tank correctly Increase room temperature Call the Service Centre Check the hose is correctly positioned Disconnect and reconnect the plug www sylvane com 1 800 934 9194 This warranty applies to all home appliances with De Longhi or Kenwood brand names FOR CONTIGUOUS UNITED STATES ONLY Limited Warranty We warrant each De Longhi appliance to be free from defects in material and work manship From the purchase date our obligation under this warranty is to provide one 1 year free parts and labor on the entire appliance with an additional four 4 years fre
6. anada Please contact our toll free hotline at 1 888 335 6644 or log onto our website at www delonghi com Other couniries Please visit www delonghi com
7. e on any part of the sealed system consisting of the compressor evaporator con denser and factory connected refrigerant tubing Labor and all other parts during the additional four 4 year warranty are to be paid by the owner All appliances in need of repair are to be shipped to an authorized De Longhi service center at the owner s expense and De Longhi will then incur the return shipping costs After the first five 5 years of ownership all expenses all parts labor and shipping are to be paid by the owner of the unit This warranty shall apply only if the appliance is used in accordance with the factory directions that accompany it and on an Alternating Current AC cir cuit This warranty is in lieu of all other warranties and representations expressed or implied and all other obligations or liabilities on our part We do not authorize any other person or company to assume for us any liability in connection with the sale or use of our appliance This warranty shall not apply to any appliance that has been repaired or altered outside our factory nor shall it apply to any appliance that has been subjected to misuse negligence or accidents If repairs become necessary see contact information below U S Residents Please contact our toll free hotline at 1 800 322 3848 or log onto our website at www delonghi com For all accessories soare parts or replacement parts please contact our parts division at 1 800 865 6330 Residents of C
8. h the unit in the stand by position press the button On the right side the display will show and the number of hours after which the appliance will start operating 2 Use the and button to set the desired hours Wait few seconds to set the set appliance The symbol and the remai ning time will remain on the display 3 When the selected time is reached the appliance will start working How to Program the delayed stop function From the ON Position 1 With the unit in the ON position press the button On the right side the display will show and the number of hours after which the appliance will stop operating 2 Use the and button to set the desired hours Wait few seconds to set the appliance The symbol and the remaining time will remain on the display 3 When the selected time is reached the appliance will stop working How to modify or disactivate the timer If you wish to modify the set value press once the timer button and pess then buttons and If you wish to disactivate the timer press the timer button twice www sylvane com 1 800 934 9194 CLEANING AND MAINTENANCE Always unplug the appliance from the power out let before performing any cleaning or maintenan ce operations For safety reasons never wash the dehumidifier using a jet of water Cleaning the cabinet e Clean the appliance using a damp cloth then dry with a dry cloth e Do not use petrol alcohol o
9. in one of the fol lowing ways A Draining into the tank The condensate can be drained directly into the tank The tank can be easily removed fig 1 When the tank is full remove fig 1 and empty it into a sink When finished replace it properly NOTE The tank must be positioned porperly for the unit to function If you hear the intermittent sound of the beep it means the tank is not in the proper position B Continuous external draining If the appliance is to be operated for long periods but you are unable to empty the tank regularly you are recommended to use continuous drai ning www sylvane com 1 800 934 9194 fig 1 1 Remove the continuous drain cap 1 by turning it counterclockwise then remove the rubber stopper from the spout 2 fig 2 a fig 2 2 Insert the drain cap 1 in the condensate drain hose 8 till the end fig 3 then screw the cap into the spout fig 4 By fig 3 3 Make sure the end of the hose is no higher than the spout Fig 3 or water could remain in the tank Make sure there are no kinks in the hose Fig 5 Keep the rubber stopper to close the spout fig 5 C Continuous draining using the pump only on pump models The patented heavy duty pump system allows water removal of up to 13 ft 4m in height If you want the water to flow directly to a drain connect the condensation discharge tube supplied 9 to the co
10. ledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Always supervise children Make sure they do not play with the appliance www sylvane com 1 800 934 9194 SAVE THESE INSTRUCTIONS THIS PRODUCT IS FOR HOUSEHOLD ONLY Appropriate use The appliance is designed and produced for domestic use only Use this appliance only as described in this instruction manual As with all electrical equipment the instructions aim to cover as many eventualities as possible However caution and common sense should be applied when operating and installing this applian ce General safeguards e Do not install the appliance in rooms contai ning gas oil or sulphur Do not install near sources of heat e Do not use the appliance on sloping surfaces e Keep the appliance at least 2 ft 61cm away from flammable substances alcohol etc or pressurised containers e g aerosol cans e Do not rest heavy or hot objects on top of the appliance e Always transport the appliance upright NOT on its side Remember to drain the condensate tank befo re moving the appliance If the appliance was transported on its side you must wait at least 6 hours before using it 24 hrs is recommended ENVIRONMENTAL INFORMATION This unit contains fluorinated greenhouse gases cove red by the Kyoto Protocol Avoid perforating the refrigerant circuit of the appliance Maintenance
11. nnection pipe located on the lower front part of the unit unit you will first need to remove the stopper labeled PUMP fig 6 Select the dehumidifying function and press the PUMP button Note With the condensation discharge hose missing and the pump switched ON the display will show the symbol PUMP blinking To eliminate this problem e Check the hose is correctly positioned e Disconnect and reconnect the plug www sylvane com 1 800 934 9194 CONTROL PANEL Display Decrease humidity level increase button humidity level temperature Fan speed button F C button only on some models Description of buttons 1 ON Standby button d ON Standby button 2 Fan button Press this button to select the Fan Speed MIN or MAX 3 Thermometer button Temporarily displays the temperature measured in the room by the appliance If you press the button once you will see the room temperature in F for a few seconds then in C for a few seconds then the display will return to the current level of humidity in the room If you press the button multiple times it will cycle through these displays faster Note Temperatures displayed are indicative only 4 Humidity increase decrease buttons These buttons are used to adjust the desired humidity level with 5 increments they are also used to set the timer From 0 10 the hours increase by 30 min and from 10 24 the hours
12. r solvents to clean the appliance e Do not spray liquid insecticide or similar pro ducts as they may deform the plastic Cleaning the air filter If the filter is dirty air circulation is compromised and the efficiency of the dehumidifying and air purifying functions decreases It is therefore good practice to clean the filter at regular intervals The frequency depends on the duration and conditions of operation If the unit is used constantly or systematically you are recommended to clean the filter once a week To remove the filter pull it down as shown in figu If the appliance is not used for long periods e After unplugging the appliance from the power outlet empty the tank e Clean and reposition the filter e Cover the appliance with a plastic bag to pro tect it from dust TECHNICAL SPECIFICATIONS See rating plate Power supply voltage Absorbed power Maximum power input Freeze protection device Yes Hygrometer Yes Fan speeds 2 Air filter Yes Operating limits temperature 41 F 89 6 F 5 C 32 C relative humidity 30 90 www sylvane com 1 800 934 9194 TROUBLESHOOTING Check the following points before calling your local authorised Service Centre PROBLEMS The appliance is operating in dehumidifying mode but the humidity does not decrease The appliance does not work for 3 minutes after start up amp is displayed D is displayed EZ PE
13. s e Do not touch the plug with wet hands e Make sure the outlet used is always accessi ble enabling you to unplug the appliance when necessary e Always unplug the appliance using the plug itself Never pull the cable as it might be damaged e To disconnect the appliance completely from the electricity supply you must unplug it from the outlet e If the appliance malfunctions do not attempt to repair it yourself Turn the appliance off unplug from the outlet socket and contact a Service Center e Do not move the appliance by pulling the power cable e It is dangerous to modify or alter the charac teristics of the appliance in any way e Ifthe power cable is damaged it must be repla ced by the manufacturer or an authorized tech nical service center in order to avoid all risk e Do not use extension cords e The appliance must be installed in accordance with the rules on household appliances in force in the country concerned e This appliance is not intended for use for water damage restoration of commercial hou sehold properties e The appliance must be connected to a pro perly grounded outlet Have your electrical circuit checked by a qualified electrician AN Danger Keep packaging materials plastic bags polystyrene foam out of reach of children Danger The appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and know
14. www sylvane com 1 800 934 9194 SOME NOTIONS ON HUMIDITY Air always contains a certain amount of water in the form of vapour This determines the level of humidity in an atmosphere The capacity of the air to hold water vapour increases with temperature This is why in our homes as soon as the tempe rature decreases the vapour contained in the air condenses as is evident on the colder surfaces in the room such as the windows walls etc The purpose of a dehumidifier is to remove the excess moisture from the air avoiding the dama ge caused by condensation ee Control panel Water level viewing window Condensate collection tank Handles Air intake grille Dust filter Air outlet grille So Ole oN Experts have established that the optimum envi ronmental conditions for our well being and for the home are obtained between 40 and 60 relative humidity Lower relative humidity can be achieved with higher room temperatures For lower room temperatures the achievable relative humidity will be on the higher side closer to 60 Therefore with lower room temperatures you are recommended to heat the room even minimally This considerably increases the dehumidifying power of the appliance With heating the condensation formed by the water vapour on windows and other cold surfa ces evaporates into the air to be collected by the dehumidifier 8 Drain hose to be used at the back of
Download Pdf Manuals
Related Search