Home

Intelli-Time® Alarm Clock

1. is pressed Troubleshooting Clock is too dark e Reset the unit by pressing the reset button located on the bottom of the clock This will reset the alarm to the original factory settings Time and date will need to be entered after a reset hard to read or doesn t work If your AcuRite product does not operate properly after trying the troubleshooting steps visit www AcuRite com or call 877 221 1252 for assistance Care amp Maintenance Clock Care Clean with a soft damp cloth Do not use caustic cleaners or abrasives Keep away from dust dirt and moisture Clean ventilation ports regularly with a gentle puff of air Replace Intelli Time Clock Battery Intelli Time technology is powered by a pre installed coin cell battery that stores the time and date settings The battery has a shelf life of several years To replace the Intelli Time battery 1 Locate the coin cell battery compartment door on the back of the display unit Unscrew and remove the compartment cover 2 Insert 1 x CR2032 coin cell battery into the battery compartment as shown Install battery with positive terminal facing OUT 3 Screw in the battery cover WARNING THIS PRODUCT CONTAINS A BUTTON CELL BATTERY IF SWALLOWED IT COULD CAUSE SEVERE INJURY OR DEATH IN JUST 2 HOURS SEEK MEDICAL ATTENTION IMMEDIATELY IF INGESTED POISON POISON Specifications FCC Information This device complies with part 15 of FCC rule
2. AK LJ gt 2 ITE Instruction Manual Intelli Time Alarm Clock model 13019W2 CONTENTS Unpacking Instructions 2 Troubleshooting 066 5 Package Contents 2 Care amp Maintenance 6 Product Registration 2 Replace Intelli Time Battery 6 Features amp Benefits 3 Specifications cessere 6 Clock Setup meea A FCC Information 4 6 Intelli Time Clock 5 A Customer Support 6 7 Set the Time amp Date Ae Warany 2608 cats perenne 7 Using the Alarm Clock 5 Questions Contact Customer Support at 877 221 1252 or visit www AcuRite com SAVE THIS MANUAL FOR FUTURE REFERENCE ACUDIeITE Congratulations on your new AcuRite product To ensure the best possible product performance please read this manual in its entirety and retain it for future reference Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product Locate the tab and peel off to remove Package Contents 1 Alarm clock 2 Instruction Manual IMPORTANT oreert warranty service PRODUCT REGISTRATION to receive year warranty protection www AcuRite com Register a Product eer omine SUPPORT wel etre pE TIP HES Features amp Benefits 7 3 6 5 4 1 ALARM ON OFF Button 6 SNOOZE Button 11 TIME ZONE Switch 2 ALA
3. RM SET Button 7 Button 12 Dimmer HI LO Switch 3 Button 8 TIME SET Button 13 Intelli Timeo Battery 4 ALARM ON kon 9 DST ON OFF Switch Compartment 5 PM Indicator 10 RESET Button 14 VOLUME HI LO Switch Full reset to factory defaults 9 10 1 14 13 12 Clock Setup Plug the power cord into power outlet Intelli Time Clock Intelli Time clock and calendar are pre programmed fo the correct time and date and update automatically for Daylight Savings Time All you need to do is select your time zone using the TIME ZONE switch Set the Time amp Date Choose the correct time zone HAST AKST PST MST CST EST AST using the TIME ZONE switch on the bottom of the clock Choose Daylight Savings Time ON or OFF using the DST switch on the bottom of the clock If you live in an area that observes Daylight Savings Time DST should be set to ON even if it is not currently Daylight Savings Time Press and hold the TIME SET button for 3 seconds to enter the SET MODE Once in the SET MODE the preference you are currently in will blink on the clock To save your adjustments press and release the TIME SET button to adjust the next preference The preference order is as follows CLOCK HOUR Please note PM Indicator light CLOCK MINUTE CALENDAR YEAR CALENDAR MONTH CALENDAR DATE You will automatically exit SET MODE if no buttons are pressed for 30 seconds Enter SET MODE any time by pressing and hold
4. acturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user authority to operate the equipment This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions Tis device may not cause ae na and 2 This device must accept any interference received including interference that may cause undesired operation of the device 6 Customer Support AcuRite customer support is committed to providing you with best in class service For assistance please have the model number of this product available and contact us in any of the following ways O 877 221 1252 info chaney inst com 24 7 support at www AcURIte com gt Installation Videos gt Instruction Manuals gt Replacement Parts IMPORTANT PRODUCT REGISTRATION Register online to receive year warranty protection www AcRite com Limited One Year Warranty At AcuRite we proudly uphold our commitment to quality technology Chaney Instrument Co warrants that all products it manufactures to be of good material and workmanship and to be free of defects when properly installed and operated for a period of one year from the date of purchase We recommend that you visit us at www AcuRite com for the fastest way to register your product However product registration does not eliminate the need to retain your o
5. he implied warranty of merchantability and the implied warranty of fitness for a particular purpose Chaney expressly disclaims all liability for special consequential or incidental damages whether arising in tort or by contract from any breach of this warranty Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you Chaney further disclaims all liability from personal injury relating to its products to the extent permitted by law By acceptance of any of Chaney s products the purchaser assumes all liability for the consequences arising from their use or misuse No person firm or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products Furthermore no person firm or corporation is authorized to modify or waive the terms of this paragraph and the preceding paragraph unless done in writing and signed by a duly authorized agent of Chaney This warranty gives you specific legal rights and you may also have other rights which vary from state to state For in warranty claims Chaney Instrument Co 965 Wells St Lake Geneva WI 53147 7 AC UDIT E Weather Temperature Weather Kitchen Clocks Stations amp Humidity Alert Radio Thermometers amp Timers Its more than accurate It S ACUO RITE AcuRite offers an extensive assortment of precision instruments designed to provide y
6. ing TIME SET button for 3 seconds Dimmer HI LO Optimize the display brightness for the location with the HI LO Dimmer switch located on the back of the clock Volume HI LO Optimize the alarm volume for the location with the Volume HI LO switch located on the back of the clock OPERATION Using the Alarm Clock Set the Alarm Time To set alarm time press the ALARM SET button once to review alarm time Press the ALARM SET button again to enter ALARM SET MODE To adjust the currently selected flashing item press and release the or buttons press and HOLD to fast adjust To save your adjustments press and release the ALARM SET button to adjust the next preference The preference set order is as follows ALARM CLOCK HOUR Please note PM Indicator light ALARM CLOCK MINUTE You will automatically exit ALARM SET MODE if no buttons are pressed for 30 seconds Enter ALARM SET MODE at any time by pressing the ALARM SET button twice Alarm Clock ON or OFF function To Turn Alarm on Press the ALARM ON OFF button until the ALARM ON icon appears on the screen To Turn Alarm off Press the ALARM ON OFF button until the ALARM ON icon disappears from the screen Alarm Clock SNOOZE function When the alarm is sounding activate the 9 minute SNOOZE function by pressing the SNOOZE button on the top of the alarm clock SNOOZE function remains active until ALARM ON OFF button
7. ou with information you can depend on to Plan your day with confidence www AcuRite com Chaney Instrument Co All rights reserved AcuRite is a registered trademark of the Chaney Instrument Co Lake Geneva WI 53147 All other trademarks and Printed in China copyrights are the property of their respective owners AcuRite uses patented 13019W2 INST 112613 technology Visit www AcuRite com patents for details
8. riginal proof of purchase in order to obtain warranty benefits Chaney Instrument Co warrants that all products it manufactures to be of good material and workmanship and to be free of defects when properly installed and operated for a period of one year from the date of purchase Remedy for breach of this warranty is limited to repair or replacement of the defective item s Any product which under normal use and service is proven to breach the warranty contained herein within ONE YEAR from date of sale will upon examination by Chaney and at its sole option be repaired or replaced by Chaney Transportation costs and charges for returned goods shall be paid for by the purchaser Chaney hereby disclaims all responsibility for such transportation costs and charges This gt Register your Product gt Support User Forum gt Submit Feedback amp Ideas PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE support gt Register a Product warranty will not be breached and Chaney will give no credit for products it manufactures which have received normal wear and tear been damaged including by acts of nature tampered abused improperly installed damaged in shipping or repaired or altered by others than authorized representatives of Chaney The above described warranty is expressly in lieu of all other warranties express or implied and all other warranties are hereby expressly disclaimed including without limitation t
9. s Operation is subject to the following two conditions 1 This device may NOT cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation WARNING Changes or modifications to this unit not a approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful AE Ra in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruc tions may cause harmful interference to radio communications However There is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help NOTE The manuf

Intelli-Time® Alarm Clock

Contents

Download Pdf Manuals

Related Search

Related Contents

Intelli-Time&reg; Alarm Clock

Contents

Download Pdf Manuals

Related Search

Related Contents

Intelli-Time® Alarm Clock