Home

Alber Viamobil V25 User Manual

1. ll E il b Viamo DE Gebrauchsanweisung User manual GB US FR utilisation Instructions d TR Kullanma talimati IT N EI Ben Ou a N zl E m N 5 Ben Ka DK Brugsvejledning NL Gebruiksaanwijzing NO Bruksanvisning SE Instruktionsbok oa Kayttoohjeet Service Center Deutschland Montag bis Donnerstag von 8 00 18 00 Uhr Freitags von 8 00 16 00 Uhr erreichbar unter Telefon 0800 9096 250 geb hrenfrei alber R Das viamobil ist klassifiziert als Ger t Typ B Contents 1 Introduction 2 6 Control unit 25 1 1 Important safety notes please observe carefully at all times 2 6 1 Display symbols 25 1 2 Proper use of the viamobil 2 6 2 Capacity indication on the control unit display 25 1 3 Permissible operating conditions locations of operation 3 6 3 Display of the selected maximum speed 26 1 4 Standard scope of delivery 3 6 4 Warnings 26 1 5 Optional accessories 3 6 5 Error indicators 27 1 6 The main elements at a glance 4 7 Anti tippers optional accessories 29 2 Start up and driving mode 5 7 1 Installing the Alber anti tippers 29 2 1 Attaching the viamobil to the wheelchair 6 7 2 Removing the Alber anti tippers 29 2 2 Inserting the quickpins 7 2 3 Removing the quickpins 7 8 Additional push handles optional accessories 30 2 4 Inserting the batt
2. fully recharged batteries ambient temperature around 20 C smooth travel etc We expect that the estimated service life of this product is five years on average provided the product is used as intended and serviced in accordance with all instructions specified in the operating manual The service life can be extended by handling servicing main taining and using the product with care and if there are no technical limitations that arise from further developments in science and technology However the service life may also be shortened significantly by excessive or improper use The service life required by the applicable standards shall not be deemed an additional guarantee well as the applicable sections of standard DIN EN 12184 The viamobil conforms to the requirements laid down in the European Medical Device Directive 93 42 EEC as We reserve the right to modify the design and technology of our products to incorporate the latest developments Automatic charger For technical information and user instructions please refer to the separate operating manual of the battery charger System label Ulrich Alber Gmbh Vor dem Weissen Stein 21 Typ Type 72461 Albstadt ie C X Systemnr System No V25112108 Baujahr Year of Manufacture 2012 Max Pers Gewicht Max occ weight 160 kg Betriebsspannung Operating Voltage 36 V Max Geschwindigkeit Max Speed 5 5 km h Motor Nennleistung rated Power 150 W III sereret
3. Alber GmbH for operation with the device The viamobil must only be operated under the following conditions e Full compliance with the information instructions and recommendations contained in this operating manual e The device is operated by a person who has been instructed in its use e No technical modifications have been made to the device by the user or by any third party e While the viamobil is in use the arms of the person sitting in the wheelchair must not project over the armrests of the wheelchair A trained operator is a person who has been instructed in the operation of the viamobil and in related tasks and who has been made aware of the possible hazards associated with the improper use of the device The instruction session is provided by the authorised dealer or by an agent of Ulrich Alber GmbH The operation of the viamobil by non instructed or unqualified persons is strictly prohib ited The viamobil must not be used for transportation tasks that contravene the intended use of the device This applies in particular to any types of load transport such as the transport of household objects by means of a wheelchair plus viamobil The use of the viamobil for any of the following purposes is deemed improper by Ulrich Alber GmbH e Use or operation of the device that contravenes the instructions and recommendations in this operating manual e Exceedance of the technical limits laid down in this operating manual e Technical modificatio
4. Before using the viamobil to drive up or down a slope practice the operation of the add on drive on level ground The viamobil must only be attached to wheelchairs that have been approved by Ulrich Alber GmbH for operation with the add on drive The bracket holding the viamobil in place may only be installed and modified by Ulrich Alber GmbH an Alber agent or your author ised specialist dealer When using the viamobil always strictly adhere to the operating instructions of the wheelchair The viamobil must only be operated by the attendant As there is a risk that the wheelchair may topple over when driving on slopes the device must not be used as a self drive device The attendant must at all times be in a position to prevent the wheelchair and its passenger from tipping over Please note that the wheelchair may tip over forward or backward We strongly recommend equipping the wheelchair with anti tippers When climbing slopes of more than 8 the use of anti tippers installed in pairs is mandatory The parking brakes of the wheelchair to which the viamobil is attached must be positioned in such a way that they can be easily operated by the attendant while pushing the wheelchair The drive wheel of the viamobil is a tubeless full rubber tyre Before setting the wheelchair in motion check the condition of the wheel The tyre tread pattern must still be adequate If the rubber tread pattern shows any cracks the viamobil must no longer be used
5. RR Before starting the charging process read and follow all instructions and warning notices included with the charg The viamobil must not be used with battery packs other than the battery pack supplied by Alber Other types of batteries may burst and cause injuries or material damage Do not charge the battery pack in the presence or vicinity of flammable liquids or gases Keep the battery pack away from fire Never place the battery pack on your legs If your legs are wet you are in particular danger of conducting current and sustain inju ries Do not expose the viamobil and the inserted battery pack to moisture of any kind during charging water rain water snow etc Never complete the charging process in rooms where moisture may affect the viamobil and the battery pack housed in the device In the unlikely event of the battery pack overheating or catching on fire you must ensure that the battery pack does not come into contact with water or other liquids The only suitable extinguishing agent that is recommended by the cell manufacturers is sand Never charge the battery pack if temperatures are under O C or above 40 C If you attempt a charging process outside of this tem perature range the battery pack s automatic control will abort the charging process automatically Your viamobil uses power in all operating modes Avoid fully discharging the battery pack as this could cause damage to the batter ies We recommend recharging th
6. access Observe the safety and warning notices regarding the battery pack provided in chapters 5 4 and 5 5 4 4 Removing the viamobil from the wheelchair Apply the parking brake of the wheelchair so that the wheelchair cannot roll away e Hold the viamobil by its carrying handle 5 e Pull the quickpins 34 out of the forks 33 see also chapter 2 3 e Swivel the viamobil out of the holder on the wheelchair and down to the ground Pull the viamobil out from underneath the wheelchair Store the viamobil in a clean and dry location where it is safe from damage and unauthorised access 5 Battery pack The battery pack can normally remain attached to the viamobil If wheelchair and via mobil are transported as luggage by such means of transport as cars buses rail planes etc the battery pack can be removed to facilitate the transport of the viamobil Please observe the information in chapter 5 6 Information on how to insert and remove the battery pack are included in the previous chapters 2 4 and 4 3 5 1 Charging the battery pack e The battery pack may only be charged in a dry room at temperatures between 0 and 40 degrees centigrade e If you want to charge the battery pack that is still inserted in the viamobil you must first pull the plug of the control unit 21 from the socket 11 see chapter 4 1 e Ifthe battery pack has already been removed from the viamobil you will not have to make any additional prepar
7. following the instructions given in chapter 2 8 The display 16 shows the set values when the viamobil is switched on when the speed is changed for a few seconds indication 41 The set speed is not displayed kilometres per hour but in relation to the maximum The lowest speed is 20 of the highest possible speed and indicated as 01 while the maximum speed is indicated as 99 Display indication Description What to do 2 The driving lever was pressed hard Release the driving lever before actuating it again to resume driving enough to trip the safety switch which stops the viamobil in the event of potentially incorrect use 10 The driving lever was pulled while Do not actuate the driving lever until the viamobil is switched on the viamobil was in the process of being switched on 40 Temperature in the drive unit too Slow down and avoid driving up steep slopes and or ensure that the high weight of the person using the device is not too high Switch off the drive unit and allow it to cool down 80 Temperature in the battery too high Slow down and avoid driving up steep slopes and or ensure that the weight of the person using the device is not too high Switch off the drive unit and allow it to cool down 81 Battery overvoltage Driving downhill at too rapid a pace and with a completely charged battery generates too much voltage Reduce your speed 82 Battery undervoltage The battery
8. is empty Stop driving and recharge the battery 83 Overcurrent Driving downhill at too rapid a pace and with a completely charged battery generates too much current Reduce your speed 85 Battery s useful life The battery has reached the end of its useful life and should be replaced 93 The ON OFF switch was pressed dur Avoid pressing the ON OFF switch during travel as this will trigger ing travel emergency brake application To resume driving afterwards you must briefly let go of the driving lever 6 5 Error indicators The viamobil has a variety of error indicators They are shown as a numeric code 41 next to a flashing warning symbol 40 on the display The following errors can be corrected by the person driving the viamobil Cc bo ou o Display indication What to do 1 Switch the viamobil off and then on again Remove the battery check the contacts on battery and drive unit for dirt and refit the battery If this does not correct the error the device needs to be repaired 2 Switch the viamobil off and then on again Check the plug of the control unit for foreign objects e g metal chips If this does not correct the error the device needs to be repaired 3 Switch the viamobil off and then on again Check the contacts on the battery and the plug of the control unit for foreign objects If this does not correct the error the device needs to be repaired 10 A repair i
9. process or place any objects on top of the device e Set up the charger in the upright position on a level surface e Never connect the terminals of the charging plug with any metal objects e Ensure that the plug is firmly inserted in the socket e Never touch the plug if your hands are wet e Do not use the plug of the charger and or the mains plug if they are wet or dirty Before inserting it clean the plug using a dry cloth e After the charging process is completed first disconnect the plug of the charger from the socket and then disconnect the charging plug from the battery pack 6 Control unit 36 All drive functions of the viamobil are controlled by the control unit and described in the previous chapters 37 6 1 Display symbols The following indications mean 36 indication of the residual capacity stored in the battery pack 37 indication driving direction forward chapter 2 7 38 Vinnie WR NG en n 38 indication driving direction reverse chapter 2 7 39 anti theft protection chapter 3 4 41 selected maximum speed chapter 2 8 In the event of an error 41 40 39 40 warning sign error 41 indication of the error code chapter 6 4 6 2 Capacity indication on the control unit display If the viamobil is switched on the capacity remaining in the battery pack is indicated both on the battery pack see chapter 5 2 and the display 16 of the
10. provided in chapters 5 4 and 5 5 OOOOO p clo Cum O 43 5 2 Capacity indication on the battery pack display If the viamobil is switched on the remaining capacity is indicated both on the control unit see chapter 6 2 and the display 10 of the battery pack The indicators do not go out until the viamobil is switched off If the battery pack is removed from the viamobil the capacity indication can also be enabled by pressing the info button 43 The indication will go out after a few sec onds The information provided in the table below refers exclusively to the indication shown on the display 10 of the battery pack The following indications mean 5 LEDs are lit 4 LEDs are lit Battery pack is charged to 100 Battery pack is charged to 80 Avoid high speeds when driving down slopes as the current feedback in the wheels may lead to overvolt age in the battery pack and force the 00006 00 0000 wheel to shut down 3 LEDs are lit Battery pack is charged to 60 1 LED is lit Battery pack is charged to 20 Charge the battery pack befo
11. quickpin cannot be inserted into or removed from ES the fork without pushing in the releasing device 35 If it can be inserted or removed without pushing in the releasing device the quickpin is defective and must be replaced without delay If one or both quickpins are defective or not properly locked in the forks do not attempt to use the viamobil 2 4 Inserting the battery pack You can insert the battery pack when the viamobil is safely connected to the wheel chair as described in the previous chapter e Make sure the electrical connections on the viamobil and the battery pack are clean and do not contain any metal particles If you detect such particles use a dry and clean cloth to remove them e Hold the battery pack by its releasing device 12 e Place the battery pack slightly slanted onto the holder of the viamobil as shown in the diagram e Release the battery pack It will automatically slide forward and engage by magnetic force Protect the battery pack against humidity moisture heat and extreme cold 22 2 5 Attaching the control unit Two holders 22 have been fitted to the push handles of your wheelchair which are used for the installation of the control unit 13 and one push handle If the control unit 13 and the push handle have not yet been attached proceed as described below e Insert the control unit 13 into the holder 22 of the wheelchair e Fol
12. 15 C to 25 C If storing the viamobil for a prolonged period do not rest the device on its drive wheel 7 as the device may otherwise start to wobble over time If stored exclusively the battery pack should be connected to the supplied battery charger at a 3 month interval to be fully recharged This ensures that your viamobil is working properly even after prolonged storage After the battery pack has been charged disconnect the charger from the power mains The batteries consist of lithium ion batteries If stored and handled correctly they are leak proof and do not require any mainte nance apart from regular recharging If storing it for an extended period switch on the viamobil once a month and move the wheelchair a few metres forward and back to prevent seizing of the brake and similar damage 10 Safety and hazard information To ensure safe operation and use of your viamobil strictly adhere to the following instructions 10 1 Safety instructions Before using the device Before a user can take a seat in the wheelchair the brakes on the wheelchair must be applied and the viamobil must be switched off in order to prevent the wheelchair from rolling away If you discover that a feature of the viamobil does not work as described in this operating manual you must not continue to use the device Contact your specialist dealer or an agent of Ulrich Alber GmbH to have the error corrected Never use the viamobil as a footboard
13. 2 1 Warranty for defects 37 5 2 Capacity indication on the battery pack display 21 12 2 Guarantee of durability 37 5 3 Temperature indicator 21 12 3 Liability 38 5 4 Safety and warning notices regarding the battery pack 22 5 5 Safety and warning notices on how to store the 13 Technical data 39 battery pack 22 5 6 Safety and warning notices on how to transport and ship the battery pack 23 5 7 Safety and warning notices regarding the charger 24 26 0001 4 99 04 As of 2013 08 20 1 Introduction 1 1 Important safety notes please observe carefully at all times The viamobil is a push and braking aid to be used exclusively by the person accompanying the wheelchair user The viamobil must under no circumstances be used as an electric drive system by the wheelchair user alone For safety reasons the viamobil must only be operated by persons who have been instructed in its handling are physically and mentally in a position to operate the device properly and according to the given operating conditions and situations The viamobil must not be operated by patients who are visually or acoustically impaired Instruction in the handling and operation of the device is included in the scope of delivery Please contact your specialist dealer or an Alber agent to arrange for a training session The instruction is free of charge If you feel a little unsure how to handle the viamobil please contact your authorised dealer or Ulrich Alber GmbH agen
14. A new wheel can only be purchased by your authorised dealer as a spare part from Ulrich Alber GmbH Ensure that the air pressure in the wheelchair tyres corresponds to that prescribed by the wheelchair manufacturer Both parameters directly affect the performance of the parking brakes The viamobil should be inspected and serviced every 2 years by Ulrich Alber GmbH an Alber agent or your authorised specialist dealer see chapter 12 5 When using the viamobil observe the following When starting the device always turn the rotary switch 17 that is used for selecting the speed to the position with the lowest speed and then gradually increase the speed to the desired walking speed The maximum permissible angle of inclination is 11 5 per cent at a maximum payload of 160 kg Greater slopes or inclines require that the operator be in a position to prevent the wheelchair from tipping over in any direction at all times Under no circumstance must you exceed the maximum permissible slope specified by the wheelchair manufacturer while driving up and down slopes and inclines Before driving down a slope readjust the speed using the rotary switch 17 to ensure that it is not greater than the walking speed of the attendant Never drive up and down slopes with the drive wheel 7 unhitched unless there is an emergency Never approach stairs precipices or steep slopes at maximum speed While the viamobil is switched on each actuation of the drivin
15. Alber agent in such cases i The display of a numeric error code that deviates from the ones listed above indicates a mechanical or electronic DU Before pressing the ON OFF switch you must secure the wheelchair by applying the parking brake 7 Anti tippers optional accessories As your wheelchair may already be equipped with anti tippers Alber anti tippers are offered as optional accessories only The use of original anti tippers is subject to the instructions and safety information that apply to their use and are provided by the manufacturer 7 1 Installing the Alber anti tippers Slide the anti tippers 28 into the holders 8 on the left and the right of the via mobil as shown in the diagram For this purpose you must press the release button 29 and if necessary slightly rotate the anti tipper up and down to lock it into the correct holder position Check if the anti tippers are seated correctly in the holder 8 It must no longer be possible to remove them without pressing the release button 29 7 2 Removing the Alber anti tippers Press the release button 29 and pull the anti tipper from the holder 8 Store the anti tippers in a safe location where the toothed section 30 cannot become damaged with anti tippers as they greatly enhance safety when driving on RR We strongly recommend equipping the viamobil or the wheelchair level ground When climbing slopes of more th
16. Service Center Tel 0800 9096 250 or by downloading it at www alber de If your battery pack is defective take it personally to your specialist dealer or Alber agent as shipping lithium ion batteries by postal service or other carriers is subject to strict rules and regulations We again recommend that you contact your specialist dealer or Alber agent Discuss transport with your specialist dealer or Alber agent prior to shipping Make sure to keep the packaging container of the battery pack in case you need to transport it 5 7 Safety and warning notices regarding the charger Before starting the charging process read and follow all instructions and warning notices included with the charg er and the warning and safety notices below e Use only the charger included by Alber to charge the battery pack of your viamobil The charging process ends automatically when the battery pack is fully charged This avoids overcharging e Never use the charger to charge battery packs other than the supplied battery pack e When the charging process is complete disconnect the charger from the mains socket first before disconnecting it from the battery pack e Never use a charger that is not supplied by Alber e Do not expose the charger to moisture of any kind during charging water rain water snow etc e Be aware of condensation If the charger is brought from a cold into a warm room condensation may occur on and in the device In this c
17. ain wear parts To ensure that the drive force and the braking force of your viamobil are transferred properly the tyres must have an adequate tread pat tern Disinfection instructions e Rub off all surfaces on the viamobil and its components using a moist not wet cloth e Please note that neither the viamobil nor its components may be blasted off with a steam blaster or similar equipment Apply the disinfect to all surfaces of the viamobil and its components e Let the disinfectant soak following the instructions provided by the manufacturer e Remove the disinfectant by wiping it off or as prescribed by the manufacturer rare cases experience that visible residue remains and sometimes pressure marks are left behind on carpets or floors if they are in contact with the tyre which vary with the respective use of floor detergents or impregnating agents We do not assume any liability in such cases We generally recommend that you store the device on hard wearing floors and for prolonged storage on a protective mat or cardboard pad an When storing the viamobil for an extended period you may in viamobil e g irregular rolling slipping wheels contact your u Should you observe a deterioration of the drive behaviour of your authorised specialist dealer or Alber agent to check the tyres All service and repair work on the viamobil must be carried out by the manufacturer an Alber agent or an authorised specialist dealer If
18. an 8 the use of anti tippers installed in pairs is mandatory Please note that certain wheelchair models must always be equipped with Alber anti tippers following the Alber bracket list This requirement is based on the results of combined tests 8 Additional push handles optional accessories Additional push handles are offered as optional accessories If they are retrofitted to an already existing viamobil the holder 49 must be attached first at Alber or at your specialist dealer 8 1 Installing the additional push handles Slip the tube 47 over the holder 49 Screw the tube 47 and the holder 49 to the lower knob 48 Loosen the height adjustment knob 46 and slide the inner tube 45 to the desired height Ensure that both handles are set to the same height Tighten the height adjustment knob 46 properly Attach the control unit 13 and the handle 50 to the additional push handles When doing so proceed as described in chapter 2 5 8 2 Removing the additional push handles If necessary remove the control unit 13 and the handle 50 from the additional push handles see also chapter 4 2 Loosen the lower knob 48 Pull the tube 47 from its holder 49 Store the additional push handles in a clean and safe location 9 Transport and storage 9 1 Using the viamobil as a vehicle seat in combination with a wheelchair Using a wheelchair as a vehicle seat with the viamobil at
19. approx 1 sec ond e The drive wheel 7 lifts off the ground and the arrow symbol 37 shown in the adjacent diagram flashes on the display When the wheel is fully off the ground all indications shown on the display 16 the green light of the ON OFF switch 14 and the capacity indication 42 on the battery pack will go out Never switch off the viamobil when parked at an incline Switching off the viamobil will lift its drive wheel off the ground robbing the device of its brake force If switching the device off at an incline cannot be avoided you must engage the manual brakes on the wheelchair before switching off the viamobil When experiencing a technical fault the viamobil will shut down automatically In this case too the drive wheel remains on the ground at first before lifting off the ground when the system restarts Consequently the manual brakes on the wheelchair must be applied to prevent the wheelchair from rolling away Before switching off the viamobil always apply the manual brakes on the wheelchair to prevent the wheelchair from rolling away 4 Removing the viamobil from the wheelchair Normally the viamobil is permanently attached to the wheelchair Proceed as follows if detaching the viamobil becomes necessary for example to allow for the transport of KG NL lt the device l 4 1 Disconnecting the control unit N D N Apply the brakes on the wheelchair to prevent the wheelcha
20. arious environmental conditions and in particular during downhill travel with the battery pack fully charged the increased feedback of energy that is intended to protect the battery pack will reduce the speed automatically This is indi cated to the driver by a flashing battery symbol on the display In extreme cases this may cause the system to shut down automatically which in turn will bring the viamobil to an immediate standstill This is indicated on the dis play 16 of the control unit by error code 81 41 and the adjacent info symbol 40 In addition the device will sound a 3 second audible signal To resume driving you should travel uphill in order to consume energy If you are required to drive uphill immediately for instance because of the location of your home you should not fully charge the battery pack of your viamobil This pro cess is completed automatically when you drive downhill due to energy feedback Ce Dr LIT 3 6 Traversing obstacles Use special caution when negotiating obstacles such as kerbs You can traverse obstacles both when driving forward and backward Higher obstacles make it necessary to lift up or push down the wheelchair by its push handles instead of using the control unit or the additional handle on the viamobil You do not have to switch off the viamobil for this purpose The height of some obstacles you nee
21. ase refrain from using the charger until all condensation has dissipated Please note that it may take several hours for conden sation to disappear e Never complete the charging process in rooms where moisture may affect the charger e Never carry the charger by its power cable or the charger cables e Never tug at the power cable to disconnect the charger from the mains socket e Never subject cable and plug to any pressure Overstretching or bending the cable pinching a cable between a wall and a window frame or placing heavy objects on a cable or a plug may result in electric shock or fire e Lay the power cable and the attached charging cable in such a way that nobody can step on it or trip over it and that cable and charger are protected against any other harmful effects or stress Do not operate the charger if the power cable the charging cable or the plugs attached to the cables are damaged Damaged parts must be replaced immediately by a specialist dealer who has been authorised by Alber e Do not use or disassemble the charger when it has received a hard blow or was dropped or damaged in another way Take the dam aged charger to a specialist dealer who has been authorised by Alber to perform repairs e The charger must not be used by children e The charger is designed to operate only with mains alternating voltage of 100 V 240 V e Never attempt to disassemble or modify the charger e Do not cover the charger during the charging
22. ations e Insert the plug of the automatic charger 26 into the socket 11 of the battery pack The connection is locked automatically by a magnetic closure e Complete the charging process following the information contained in the operating manual that is included with the charger The display 10 of the battery pack indi cates the charge status based on the table below Make sure the plug of the control unit 21 and the socket 11 are clean and do not contain any metal particles If you detect such particles use a dry and clean cloth to remove them For details see chapter 12 2 Indication on the display of the battery pack during charging 1 LED red flashes One LED flashes 1 LED is lit Battery pack is charged to less than The battery pack is charged to 20 between 20 and 40 740000 One LED flashes 2 LEDs are lit The battery pack is charged to between 40 and 60 One LED flashes 3 LEDs are lit The battery pack is charged to between 60 and 80 0080 O00 400 One LED flashes 4 LEDs are lit 5 LEDs is lit The battery pack is charged to Batte
23. attery pack as this could cause damage to the batteries We recommend recharging the battery pack immediately after every use To charge the battery pack use only the mains charger supplied with your viamobil The charging process ends automatically when the battery pack is fully charged This avoids overcharging For detailed instructions regarding the battery pack see also chapter 5 11 2 Cleaning and disinfection instructions When cleaning the device never use cleaning benzine thinner acetone or similar agents Instead use only conventional household cleaning agents and disinfectants isopropyl alcohol e Clean the control unit the push handle and the battery pack only with a moist not wet cloth e Clean the bracket attached to the wheelchair with a moist not wet cloth e Regularly clean the drive wheel using a dry brush or compressed air cleaner Check all electrical connections charger socket control unit connection 11 plug of the control unit 21 and the charging plug 26 for possible contamination before assembling them The magnetic force generated by the components may cause metal particles such as chips or similar objects to settle on the surfaces of the components which may result in a short circuit Clean the components using a clean and dry but never wet or moist cloth Your viamobil is a low maintenance device With the exception of the tyres the add on drive does not cont
24. control unit The indicator does not go out until the viamobil is switched off The information provided in the table below refers exclusively to the indication shown on the display 16 of the control unit The following indications mean 5 bars 4 bars o i 9 i 9 Battery pack is charged to 100 Yo mmm Battery pack is charged to 80 a Avoid high speeds when driving EEN YT Saaz down slopes as the current feedback in the wheels may lead to overvolt age in the battery pack and force the wheel to shut down 3 bars 2 bars Battery pack is charged to 60 Battery pack is charged to 40 ss We strongly recommend that you do i not cover expansive distances without previously charging the battery pack 1 bar Di 1 bar flashes Battery pack is charged to 20 Battery pack is charged to 10 you Charge the battery pack before using should not use the device the device mu Charge the battery pack before using the device speed 41 table below May LC A N 41 40 6 4 Warnings The viamobil can issue a variety of warnings They are shown as a number 41 next to a flashing warning symbol 40 on the dis play 16 of the control unit In addition the device will sound an audible signal Possible error messages and instructions on how to eliminate errors are listed in the 6 3 Display of the selected maximum speed You can set the maximum speed you wish to reach
25. d down the locking wheel 20 by 90 degrees e Turn the locking wheel 20 clockwise until the control unit 13 is seated firmly in the holder 22 e Insert the plug of the control unit 21 into the socket 11 on the battery pack The connection is secured automatically and conveniently by magnetic force Make sure the plug of the control unit 21 and the socket 11 are clean and do not contain any metal particles If you detect such particles use a dry and clean cloth to remove them For details see chapter 12 2 2 6 Switching on the viamobil To switch on the viamobil press and hold the ON OFF button 14 for approx 1 second The button lights up green the drive wheel 7 is extended until it reaches the floor and an arrow symbol 38 starts flashing on the display Once the wheel is fully extended the display 16 indicates the selected direction of travel see chapter 2 7 and the charge status of the battery pack see chapter 5 2 In addition the selected speed see chapter 2 8 is indicated on the display for a few seconds When switching on the viamobil make sure your leg is not under neath the extended wheel Risk of crushing injuries on the display 16 For an overview of all possible indications see chapter 5 2 TI The charge status of the battery pack is also constantly indicated 2 7 Selecting the direction of travel You can use the ergonomically shaped dri
26. d to traverse may no longer make it possible to push the viamobil as the drive wheel may no longer be in contact with the ground depending on the wheelchair s angle of inclination In such cases approach the obsta cle at a 20 degree angle rather than at a right angle Approach every obstacle at a slow pace and brake in good time before you reach it Make absolutely sure not to approach the obstacle at maximum speed prevent the wheels to bump into the obstacle and never attempt to traverse the obstacle at maximum speed Such driving manoeuvres may especially damage the front wheels of the wheelchair or in extreme cases cause them to break off When traversing obstacles see chapter 3 6 do not lift up or push down the wheelchair by means of the control unit or the additional handle Similarly do not tilt the wheelchair by pressing down on the battery pack with your foot 3 7 Manually engaging disengaging the drive wheel Emergency release If your viamobil can no longer be operated for instance due to a drained battery pack the device will switch off automatically In this case the display will show code 41 next to the info symbol see also chapter 6 5 The residual energy remaining in the battery pack is usually sufficient to switch the viamobil on and off again which will automatically retract the drive wheel 7 If this is not possible you can manually disengage the drive wheel by fol
27. e battery pack immediately after every use To charge the battery pack use only the Alber charger supplied with your viamobil The charging process ends automatically when the battery pack is fully charged This avoids overcharging When the charging process is complete disconnect the charger from the mains socket first before disconnecting it from the battery pack Use the battery pack only for the purposes specified in the operating manual Never attempt to dismantle or modify the battery pack Never connect the terminals of the battery pack with any metal objects Do not immerse the battery pack in water This may lead to irreversible damage The useful life of the battery pack depends among other things on its storage location Consequently never leave the battery pack whether the battery pack is installed in or has been removed from the viamobil in hot locations for prolonged periods In particu lar use the boot of a car parked in the sun only for transport rather than as a storage location 5 5 Safety and warning notices on how to store the battery pack Use the included cardboard box for storing the battery pack Protect the battery pack immediately after you removed it from the viamobil Never allow any moisture or foreign particles e g metal fragments small nails or other conductive metals to penetrate the battery pack Do not expose the battery pack to moisture of any kind during charging water rain water snow etc Be
28. ery pack 7 8 1 Installing the additional push handles 30 2 5 Attaching the control unit 8 8 2 Removing the additional push handles 30 2 6 Switching on the viamobil 9 2 7 Selecting the direction of travel 9 9 Transport and storage 31 2 8 Selecting the speed 10 9 1 Using the viamobil as a vehicle seat in combination with a wheelchair 31 3 Driving mode 10 9 2 Safety note regarding transport of the viamobil 31 3 1 Starting to drive 10 9 3 Safety instruction on how to hold the viamobil 32 3 2 Safety circuit 11 9 4 Safety note regarding the electrical connections 32 3 3 Automatic brake engagement 11 9 5 Storage 33 3 4 Anti theft protection 12 3 5 Downhill travel with the battery pack fully charged 12 10 Safety and hazard information 33 3 6 Traversing obstacles 13 10 1 Safety instructions 33 3 7 Manually engaging disengaging the drive wheel 10 2 Obstacles 34 Emergency release 14 10 3 Danger areas and hazardous situations 35 3 8 Switching off the viamobil 15 11 Maintenance care and disposal 35 4 Removing the viamobil from the wheelchair 16 11 1 Charging the battery pack 35 4 1 Disconnecting the control unit 16 11 2 Cleaning and disinfection instructions 36 4 2 Removing the viamobil from the wheelchair 17 11 3 Disposal 37 4 3 Detaching the battery pack 18 11 4 Re use 37 4 4 Removing the viamobil from the wheelchair 18 11 5 Maintenance 37 5 Battery pack 19 12 Warranty and liability 37 5 1 Charging the battery pack 19 1
29. fore storing it charge the battery pack and check its charge status every 3 months Store the battery pack in a cool and dry location where it is safe from damage and unauthorised access Before shipping or transporting a damaged battery pack you must consult your specialist dealer or the Alber Service Center Instructions on how to handle a damaged or defective battery pack If damaged or defective the battery pack must be singled out and checked Contact your specialist dealer to learn about the proper procedure that must be used for returns and repairs The defective damaged battery pack must not be used or opened under any circumstances Battery pack data Lithium ion cells gt 100 Wh Dangerous goods class 9 5 6 Safety and warning notices on how to transport and ship the battery pack The battery pack of the viamobil is composed of lithium ion cells Transport and ship ping of the battery pack are therefore subject to all applicable statutory requirements which must be strictly observed For instance a defective battery pack must never be transported by plane or carried as luggage As transport regulations may change annually we strongly recommend that you consult your travel operator airline or shipping line before your set out on your trip in order to learn about the currently applicable regulations In this context our transport certificate may be helpful You can obtain this certificate by calling our Alber
30. g lever 19 is converted into a drive command It is therefore imperative that inadvertent actuation is prevented When stopping or waiting in potentially dangerous positions e g while waiting at a traffic light in front of slopes or ramps of any type switch off the viamobil and do not touch the driving lever 19 Ensure that children do not touch the driving lever 19 or set the viamobil in motion Do not attach any objects shopping bags etc directly to or near the control unit Such objects may actuate the driving lever 19 which could result in inadvertent drive pulses Do not attach any objects shopping bags etc to the additional push handles as they may actuate the driving lever 19 which could result in inadvertent drive pulses When driving on pavements keep a safe distance preferably the width of the wheelchair from the kerb To drive over kerbs you can drive forward or backward without having to switch off the viamobil Lift the wheelchair by its handles and not by the handle on the control unit or the additional handle When driving over kerbs observe the maximum climbing height specified by the wheelchair manufacturer Avoid using the wheelchair on soft ground e g loose chipping sand mud snow ice or deep puddles Never leave the viamobil unattended even if it is switched off However if this cannot be avoided you can activate anti theft pro tection see chapter 3 4 During prolonged trips the drive sy
31. he viamobil is re used its safety must be checked The brackets with which the viamobil is attached to the wheelchair can be easily and quickly removed by the authorised dealer or Alber agent and mounted on another Before re using the viamobil clean it as described in chapter 12 2 and disinfect the control unit and the housing of the battery pack To do this use a product based on isopropyl alcohol that is suitable for wiping disinfection The product must have an alcohol concen tration of 70 Observe the use instructions of the product 11 5 Maintenance Lawmakers have laid out the execution of safety inspections in the Medical Devices Operator Ordinance MPBetreibV Safety inspections hereinafter referred to as STK are intended to verify the operation and safety of the product uncover any defects and if necessary initiate steps repairs that will restore the product to proper working order Section 6 of the MPBetreibV stipulates that the manufacturer has to specify an interval at which this STK is to be performed and which must not exceed 2 years with regard to the products listed in appendix 1 Based on our market observations an interval of 2 years has proven reasonable for products used as mobility aids that are used under normal operating conditions This guideline value of 2 years may vary with the product s respective degree of utilisation and the behaviour of the user Checking the degree of utilisation and the user behaviour is the res
32. ir from moving inadvert Q ently e Switch off the viamobil see chapter 3 8 e Pull the plug of the control unit 21 from the socket 11 on the battery pack as shown in the diagram while the viamobil is switched on the drive wheel will lock up Con sequently the viamobil must always be switched off before the plug 21 can be pulled Zb If the plug of the control unit 21 is pulled from the battery pack the cable of the control unit This may cause the plug to snap back HH Do not disconnect the control unit from the viamobil by pulling on and hit you 4 2 Removing the viamobil from the wheelchair e Turn the knob 20 counter clockwise by approximately 3 rotations e Fold up the knob 20 by 90 degrees e Pull the control unit out of its holder 22 on the wheelchair e Store the control unit in a location where it is safe from damage and unauthorised access e Proceed in the same manner when removing the push handle that is located on the other side of the wheelchair ooo SS 4 3 Detaching the battery pack e Reach into the locking mechanism 12 of the battery pack as shown in the draw ing e Pull the battery pack up and off the viamobil e Store the battery pack in a cool and dry location where it is safe from damage and unauthorised
33. l during transport or move it manually Wy Actuating the releasing device 12 disconnects the battery pack 9 4 Safety note regarding the electrical connections The electrical connections e of the battery pack 9 e of the viamobil rear e of the charger socket 11 e of the charging plug 26 e and of the plug 21 on the control unit contain magnetic components Ensure that all components are stored in a safe and first and foremost clean loca tion during transport or storage Metal fragments metal chips or any other small parts must not enter the electrical connections under any circumstances Before being assembled the electrical connections should be cleaned with com pressed air to prevent any present contamination by metal particles such as chips or similar objects from causing a short circuit 9 5 Storage To store the viamobil place it on a surface that is easy to clean Experience shows that certain tyres e g bicycle tyres can leave behind residue on some plastic floors for instance PVC floors that cannot be removed The viamobil is also equipped with such commonly used tyres If you are unsure in this regard we recommend that you use cardboard as padding Ulrich Alber GmbH denies all liability for any damage caused to floors If you wish to store the viamobil for a prolonged period of time you must keep the device and in particular the battery pack in a dry environment preferably at room temperature
34. l for preselecting the speed 17 Driving direction switch 18 Driving lever 19 Locking wheel 20 Plug 21 Holder on the wheelchair 22 Key for anti theft protection 23 Automatic charger Automatic charger housing 24 LED display 25 Charging plug 26 Mains plug 27 Anti tippers Anti tipper complete 28 Release button 29 Toothed section 30 On the wheelchair Lower holder 31 Upper holder 32 Fork of the upper holder 33 Quickpin 34 Quickpin releasing device 35 32 2 Start up and driving mode The viamobil is supplied to you ready for operation This means that e special brackets 31 and 32 to which the viamobil is attached have been mount ed on either side of the wheelchair e the viamobil has been fitted to the wheelchair e the viamobil control unit 13 has been mounted on the push handles of the wheel chair or the additional push handles of the viamobil which are available as optional accessories e and if necessary anti tippers have been attached to the wheelchair or the viamobil see chapter 7 for more information Your viamobil is thus ready for operation and can be started and operated by follow ing the instructions in the chapters contained in this operating manual and the instruc tions given in the free instruction session of your authorised dealer or an agent of Ulrich Alber GmbH The installation of the brackets 31 and 32 on the wheelchair and all necessary adjustments
35. l in the car we recommend tying the individual compo nents with suitable straps to the vehicle Please note that it is the responsibility of the owner to ensure that all components are prop erly secured and that Ulrich Alber GmbH shall not be held liable for any damage caused by unsecured parts The individual components of the viamobil must never be stored unless they are properly secured Please check whether there are specific regulations regarding the transport of the viamobil or its components in your jurisdiction and strictly adhere to these regulations Accidents of any kind and their resulting consequences as well as damage to the wheelchair or the viamobil that e resulted from non compliance with these instructions e occurred due to non compliance with the laws and regulations in the country of use e and can be attributed to the use of impermissible or unsuitable safety systems shall not be deemed as situations for which Ulrich Alber GmbH and their agents are liable 9 3 Safety instruction on how to hold the viamobil Moving the viamobil manually or holding it during transport requires that the battery pack be removed see chapter 4 3 Once this has been done you can hold the viamobil by its carrying handle 5 as shown in the adjacent diagram from the viamobil Therefore never hold the viamobil by the releasing device 12 of the inserted battery pack regardless of whether you hold the viamobi
36. lightly drain the battery If this does not correct the error the device needs to be repaired 72 Check the status of the handle of the emergency release 6 see chapter 3 7 the grip has to be engaged Remove the battery check the contacts on battery and drive unit for dirt and refit the battery Then turn the viamobil off and back on If the error cannot be corrected in this way then repairs must be made 80 Switch the viamobil off and wait until the battery has cooled off If this does not correct the error the device needs to be repaired Continued on the next page Display indication What to do 81 Switch the viamobil off and then on again Drive for a while along a level route or if possible uphill to drain the battery 82 Switch the viamobil off and then on again Charge the battery 83 Switch the viamobil off and then on again Drive for a while along a level route or if possible uphill to drain the battery 88 90 Switch the viamobil off and then on again If this does not correct the error the device needs to be repaired 91 Switch the viamobil off and then on again Check the contacts on the battery and the drive unit If this does not correct the error the device needs to be repaired 92 Switch the viamobil off and then on again If this does not correct the error the device needs to be repaired fault of the viamobil Contact your authorised specialist dealer or
37. lopes or inclines require that the operator be in a position to prevent the wheelchair from tipping over in any direc tion at all times The basic safety requirements include proper tyre profiles correct wheelchair tyre pressure firm ground and a maximum load of 160 kg on the wheelchair When driving along bends turning the wheelchair or driving uphill or downhill the centre of gravity of the wheelchair may be shifted so that there is a risk that the wheelchair may tip over to the side Therefore proceed with extreme caution and reduce the speed of the add on drive Special caution is required when crossing main roads crossroads and level railway crossings Never push the wheelchair at a small angle over rails as the wheels could be jammed in the rails Proceed with special caution when driving over ramps or lifting platforms of vehicles Before lifting or lowering the wheelchair on the ramp or lifting platform switch off the viamobil Do not actuate the driving lever 19 Apply the hand brakes of the wheelchair This prevents the wheelchair from rolling away for example by inadvert ent drive commands If the ground is wet the tyres adhesion may be poor so that there is a risk of slipping Adjust your driving behaviour accordingly H The viamobil supports slopes and inclines of up to 18 11 Maintenance care and disposal 11 1 Charging the battery pack Your viamobil uses power in all operating modes Avoid fully discharging the b
38. lowing the instructions below Pull the handle of the releasing device 6 which is located on the right side of the drive wheel outward while turning it in any direction by approx 90 The coupling has now been released see fig A the drive wheel can be moved manually and the wheelchair can be pushed Recharge the battery pack see chapter 5 1 You must re engage the wheel before putting the viamobil back into operation Turn the handle of the releasing device 6 in any direction until it locks back into the drive wheel Check if the drive wheel is properly locked in place it must no longer be possible to turn it manually If the drive wheel has been locked correctly see fig B the viamobil can be oper ated again as normal Before disengaging the drive wheel 7 you must tighten the manual brakes on the wheelchair in particular at an incline in order to prevent the wheelchair from rolling away If the drive wheel 7 is still engaged when the viamobil is switched on the display will show error code 72 Engage the drive wheel If the error message 70 appears on the display then the drive wheel 7 is still disengaged Engage the drive wheel 3 8 Switching off the viamobil When you are finished driving you should switch off the viamobil not least in order to conserve the power stored in the battery pack e To switch off the viamobil press and hold the ON OFF switch 14 for
39. missioned in contravention to the instructions in this operating manual the viamobil has been operated with insufficient battery charge the viamobil has been repaired or otherwise modified by a person not authorised to carry out such work third party parts have been attached to the viamobil parts of the viamobil have been removed 13 Technical data Drive unit Range Speed Slope Maximum weight of user Motor power rating Size length width height System number year of production Battery pack Batteries Rated operating capacity Operating temperature Weight of components Battery pack Drive unit Control unit Automatic charger Total weight Protection class of all components max 20 km Continuously adjustable to max 5 5 km h forward travel or max 2 7 km h reverse travel up to 18 incline slope Maximum safe incline slope according to DIN EN12184 2009 15 8 at a load of 100 kg and 11 5 at a load of 160 kg 160 kg 150 Watt 320 mm x 287 mm x 273 mm without additional push handles without anti tippers see information on the type plate attached to the drive unit Li Ion 6 6 Ah 36 Volt Ambient temperature range approx 25 C to 50 C 2 4 kg 10 3 kg 0 6 kg 0 5 kg 13 8 kg IPx4 protected against splash water The range depends on the terrain and the prevailing driving conditions The specified maximum range is valid for optimum travel conditions level terrain
40. ns to the device e Attachment and or use of parts and accessories that have not been supplied or approved by Ulrich Alber GmbH Damage resulting from e using the device improperly or e use by a person who has not been instructed in the handling of the device shall not be deemed by Ulrich Alber GmbH as part of the company s liability While the viamobil is in use the person sitting in the wheelchair must remain still Please note that their specific condition may cause some patients to move in an uncoordinated manner Stop using the device in these cases until the patient has settled down The person operating the device should be capable at all times to react to such sudden movements of the person being conveyed It is therefore up to the person operating the viamobil to decide whether a person can be safely transported on the device Before using the device carefully read all safety and hazard information contained in the individual chapters of this operating manual 1 3 Permissible operating conditions locations of operation The viamobil must only be used at ambient temperatures between 25 C and 50 C Observe the permissible operating conditions of the wheelchair to which the viamobil is attached see wheelchair manual Any limits regarding the operation of the wheelchair e g maximum climbing capability maximum permissible height of obstacles max load etc must also be observed during the use of the viamobil Avoid using the
41. ome loose see chapter 9 3 e Slide the lower bolt 1 of the viamobil into the lower holder 31 on the wheelchair until it reaches the stop e Once the lower bolt 1 of the viamobil is fully seated in the lower holder 31 slightly lift up the viamobil When doing so make sure the upper bolt 3 on the viamobil is inserted in the fork 33 of the upper holder e Close the forks 33 on both sides with the quickpin 34 as soon as the upper bolt 3 of the viamobil is seated in the fork 33 see also chapter 2 2 The drive wheel 7 of the viamobil is now approx 15 mm above the ground to allow the wheelchair to be moved manually if necessary and without the need to make use of the viamobil 12 2 2 Inserting the quickpins Hold the quickpin 34 between your index and middle finger as shown in the dia gram e Push in the releasing device 35 at the centre of the quickpin using your thumb e Insert the quickpin through the upper bracket fully into the fork 33 until it reach es the stop e Release the releasing device 35 The quickpin now locks the fork so that the upper bolt of the viamobil cannot become dislodged 2 3 Removing the quickpins e Hold the quickpin 34 between your index and middle finger e Push in the releasing device 35 at the centre of the quickpin using your thumb e Pull the quickpin from the fork 33 of the upper bracket 7 Ensure that the
42. ponsibility of the operator In any case we strongly recommend that you clarify beforehand to what extent the cost of the STK is covered by your health insurance provider especially with regard to any existing contracts 12 Warranty and liability 12 1 Warranty for defects Ulrich Alber GmbH guarantees that the viamobil is free of defects at the time of delivery The warranty expires 24 months after the date of delivery of the viamobil 12 2 Guarantee of durability Ulrich Alber GmbH grants a 24 month guarantee of durability for your viamobil The guarantee of durability shall not apply to e Devices whose serial numbers have been tampered with or removed e Wear parts such as brakes tyres and control elements e Defects caused by normal wear incorrect handling including non compliance with the instructions in this operating manual acci dents reckless damage damage caused by fire water force majeure and other events that are outside the control of Ulrich Alber GmbH e Parts that may need to be serviced or replaced as part of normal use e g tyre change Device inspection without detection of a fault or defect 12 3 Liability Ulrich Alber GmbH as the manufacturer of the viamobil shall not be liable in cases where the viamobil is handled or operated incorrectly the viamobil has not been serviced at the prescribed 2 year intervals by an authorised specialist dealer Alber agent or Ulrich Alber GmbH the viamobil has been com
43. re using the device OOOOOI0 RH 000080 2 LEDs are Lit Battery pack is charged to 40 We strongly recommend that you do not cover expansive distances without previously charging the battery pack 000 1 LED red flashes Battery pack is charged to 10 you should not use the device Charge the battery pack before using the device 740000 5 3 Temperature indicator Operating temperature If the operating temperature of the viamobil drops below or exceeds the permissible limits ambient temperature approx 25 C to 50 C the viamobil will shut down automatically The display of the control unit shows an error code see chapter 6 5 and a red LED 44 flashes next to the temperature symbol on the display of the battery pack Charging temperature If the charging temperature drops below or exceeds the permissible limits 0 to a maximum of 40 centigrade the charging process will be aborted automatically This is indicated by the above mentioned LED 44 which appears next to the temperature symbol on the display of the battery pack 5 4 Safety and warning notices regarding the battery pack er and the warning and safety notices below
44. ry pack is charged to 100 between 80 and 100 0000 00000 Follow the safety and warning notices provided on the following page If an error occurs during the charging process all LEDs will flash at a slow interval Check if all criteria e g ambient temperature properly connected charging plug etc for the charging process have been met in accordance with this operating manual and the operat ing manual that is included with the charger Do not leave the charger connected to the mains socket any longer than necessary When the charging process is complete disconnect the charger from the mains socket first before disconnecting it from the battery pack If the battery pack and the viamobil are connected to the wheelchair during charging apply the parking brake of the wheelchair so that it cannot roll away Before using the device always check the charge status of the bat tery pack The battery pack should be fully charged prior to use in order to prevent the device from stopping inadvertently due to a drained battery pack The battery pack may only be charged in a dry room at temperatures between 0 and 40 degrees centigrade Please observe the instructions in the operating manual enclosed with the charger Observe the additional information on the battery pack
45. s necessary 11 12 14 and 15 Switch the viamobil off and then on again Check if the control unit is affected by magnetic fields and elimi nate any such magnetic fields If this does not correct the error the device needs to be repaired 13 20 40 41 Switch the viamobil off and then on again If this does not correct the error the device needs to be repaired 42 The drive unit overheated Let it cool off so that you can resume driving 43 44 Switch the viamobil off and then on again Avoid overloading the drive unit which may be caused for instance by driving up too steep an incline 52 53 Switch the viamobil off and then on again Check the contacts on the battery and the drive unit If this does not correct the error the device needs to be repaired 66 The emergency release was activated Using the device is no longer possible in this case Deactivate the emergency release see chapter 3 7 If this does not correct the error the device needs to be repaired 67 Switch the viamobil off and then on again If this does not correct the error the device needs to be repaired 70 Check the status of the handle of the emergency release 6 see chapter 3 7 the grip has to be engaged Then turn the viamobil off and back on If the error cannot be corrected in this way then repairs must be made 71 Switch the drive off and then on again Drive for a while along a level route or if possible uphill to s
46. s stopped at an incline The brake is disen gaged automatically when the driving lever 19 is actuated The display will only show the direction of travel 37 and the charge status of the battery pack 36 instead of any particular indicators When stopped at an incline the wheelchair must also always be secured with the brakes on the wheelchair 39 16 Cc B OI 41 40 3 4 Anti theft protection To prevent it from being misused the viamobil is equipped with an anti theft device The device can only be activated disabled when the viamobil is switched on Activating anti theft protection e Place the key 23 directly onto the sensor field of the control unit that is marked with a key symbol 15 e All indications shown on the display 16 go out while the key symbol 39 remains visible e The anti theft device is now activated e Switching off the viamobil see chapter 3 8 does not affect the activation of the anti theft device i e anti theft protection will be enabled when the device is switched back on Disabling anti theft protection e Place the key 23 directly onto the sensor field of the control unit that is marked with a key symbol 15 e The display 16 stops showing the key symbol and shows the set direction of travel 37 or 38 and the charge status of the battery pack 36 instead 3 5 Downhill travel with the battery pack fully charged As a result of v
47. shinweis Beachom When in need of repairs include the system number noted on the type plate The type plate is located in the area below the battery pack which you can remove from the via mobil as described in chapter 4 3 Follow safety hints This operating manual is available for download on our website at www alber de If you require a version that is written in a larger font contact our Alber Service Center Thre Alber Vertretung Your Alber representative Votre repr sentation Alber Sizin Alber Temsilci Su representaci n Alber Din Alber representant Din Alber agenturene Uw distributeur Alber Deres Alber repraesentation alber Ulrich Alber GmbH Vor dem Wei en Stein 21 72461 Albstadt Tailfingen Telefon 49 0 7432 2006 0 Telefax 49 0 7432 2006 299 info alber de www alber de www alber de Ulrich Alber Albstadt
48. stem of the viamobil may become hot Do not touch the drive system immediately after a long trip e g to place the viamobil in the car etc Take care not to store the viamobil in places that are exposed to direct sunlight The degree to which the components of the viamo bil may heat up varies with the intensity of their exposure to the sun The performance of the viamobil can be affected by electromagnetic fields that are produced for example by mobile phones There fore switch off the add on drive if a mobile phone is used in the vicinity of the wheelchair Conversely the viamobil may interfere with other electrical equipment such as anti shoplifting barriers in department stores Observe the following when finished using the viamobil Before a user can leave the wheelchair the brakes on the wheelchair must be applied and the viamobil must be switched off in order to prevent the wheelchair from rolling away When not in use the viamobil must be switched off to prevent inadvertent triggering of drive pulses when the driving lever 19 is touched and prevent the battery from discharging completely Apply the manual brakes on the wheelchair Park the wheelchair and the viamobil only in dry and safe places Never allow moisture to enter the viamobil or the battery pack and the control unit Recharge the battery pack of your viamobil as soon as possible after each trip 10 2 Obstacles You can traverse obstacles such as kerbs both when dri
49. t come 36 3 2 Safety circuit Avoiding sudden obstacles or dangerous situations requires an immediate stop of the viamobil which is triggered by a safety circuit e Press the driving lever 19 all the way and past its regular resistance e The viamobil will stop immediately e The display shows the code 02 and a flashing info symbol 40 In addition the device will sound an audible signal e Releasing the driving lever 19 will turn off all indications and the audible signal e The viamobil will then be standing still e To resume driving press the driving lever 19 again the driving lever 19 If the safety circuit is triggered by pressing the driving lever 19 in a dangerous situation the viamobil will come to an immediate and abrupt standstill This may cause the wheelchair user to fall out of the wheelchair especially if the device is stopped at maximum speed or during possibly too rapid downhill travel We therefore recommend that the user drive with care and wear a lap belt Also follow the instructions given in chapter 3 5 TI The regular way to bring the viamobil to a standstill is by releasing 3 3 Automatic brake engagement If the viamobil is switched on and the driving lever 19 is not actuated within 30 seconds the electromagnetic brake will engage automatically This prevents the wheel chair from rolling away in particular if it i
50. t for advice While operating the viamobil observe the specifications of the wheelchair manufacturer e g maximum slope air pressure of tyres etc and strictly adhere to the operating instructions of the wheelchair Never exceed any of the specified limit values Before using a mobile phone or similar device always secure the wheelchair on level ground and switch off the viamobil Avoid strong electromagnetic fields for example near large electric motors as they may interfere with the viamobil In rare cases the operation of the viamobil may interfere with other electrical devices such as anti shoplifting barriers in department stores Therefore do not start the viamobil before you have been properly instructed in its operation by an authorised specialist dealer or an agent of Ulrich Alber GmbH 1 2 Proper use of the viamobil The viamobil is an add on drive attached to a manually operated wheelchair to assist the attendant of a wheelchair user in pushing the wheelchair It thus enables people to take long drives without tiring as the effort for pushing and braking is greatly reduced The electric motor of the viamobil makes it easy to push the wheelchair up a slope When travelling down a slope the viamobil reduces the speed to the set level which makes operation of the wheelchair safer even on steep slopes It is forbidden to make any technical modifications to the device Do not attach any parts other than accessories approved by Ulrich
51. tached is prohibited If the vehicle is equipped with a lifting platform or similar equipment exercise extreme caution when driving the wheelchair including the viamobil onto the platform Drive slowly and carefully Do not make any sudden abrupt or jerky movements Look in the direction of travel and avoid any distractions When moved inside the vehicle the wheelchair user must be switched to a regular seat in the vehicle where he is protected by the vehi cle s safety system e g air bags and side impact protection While the viamobil can remain attached to the wheelchair during travel its battery pack must be removed and stored in a safe place Ulrich Alber GmbH shall not be liable for any accidents and their consequences or damage to the wheelchair the viamobil or any other objects and installations that result from non compliance with these requirements and instructions 9 2 Safety note regarding transport of the viamobil While the viamobil can remain attached to the wheelchair during transport its battery pack must be removed Control unit and battery pack must not remain connected during transport When removing the viamobil from the wheelchair make sure to secure the device and all of its components battery pack control unit additional push handles and anti tippers in such a way during transport inside a vehicle that they do not pose a risk to the driver or the passengers in the event of a sudden brake manoeuvre To secure the viamobi
52. to decrease the speed The set maximum speed can be adjusted continuously from 1 1 km h to 5 5 km h and 0 5 km h to 2 7 km h for travelling forward and backward respectively while the device is standing still or in motion While being adjusted the speed set value in relation to the maximum speed see also chapter 6 3 is shown on the display 16 for a few seconds We recommend that drivers who use the viamobil for the first time start at a low final speed in order to become adequately familiar Di with the viamobil s driving characteristics Refrain from making your first driving attempts in narrow areas such as hallways 3 Driving mode 3 1 Starting to drive When you have made all the settings described in the previous chapters you can start using the device The driving lever 19 acts like the accelerator pedal on your car e Pressing lightly on the driving lever 19 causes the viamobil to slowly move in the set direction of travel s Ifyou depress the driving lever 19 all the way until you feel noticeable resistance the viamobil will move in the set direction of travel and at the maximum speed you selected see chapter 2 8 e When you release the driving lever 19 the viamobil will come to a standstill to an immediate standstill but keep moving in the direction of travel for a short distance Therefore stop in time before you run into an obstacle ay When the driving lever 19 is released the viamobil will no
53. to the viamobil must be carried out by Ulrich Alber GmbH its agents or your authorised specialist dealer Regularly check the brackets 31 and 32 to ensure that they are firmly screwed to the wheelchair If a screw connection has become loose contact your specialist dealer or Alber agent to have it retightened It may be necessary to readjust the device Alber provides brackets of various designs single part or multiple part brackets The bracket shown in the figures of this operating manual may therefore deviate from that attached to your bracket Follow the operating and safety instructions as well as the hazard information contained in this operating manual before putting your viamobil into operation 2 1 Attaching the viamobil to the wheelchair e Make sure that both manual drive wheels have been properly attached to the wheel chair e Apply the parking brake of the wheelchair so that it cannot roll away e Remove the quickpins 34 if they are seated in both forks 33 see chapter 2 3 e Remove the battery pack 9 from the viamobil e Use the carrying handle 5 to slide the viamobil under the wheelchair as shown in the diagram With the battery pack inserted Do not grab the releasing device 12 of the battery pack to slide or lift the viamobil as this may cause the battery pack to c
54. ving direction switch 18 to set the direction of travel e Slide the driving direction switch 18 forward diagram A the viamobil will move forward when you actuate the driving lever 19 e Slide the driving direction switch 18 back diagram B the viamobil will move backward when you actuate the driving lever 19 e If the driving direction switch 18 is adjusted when the device is standing still the viamobil will immediately move in the set direction when the driving lever 19 is actuated e If the driving direction switch 18 is adjusted during travel the viamobil will stop automatically and switch the direction of travel as soon as the device is standing still You will then have to release the driving lever 19 before pressing it again This is necessary for the device to move in the indicated direction e The set direction of travel is indicated on the display 16 by an arrow see chapter 6 1 en OO 41 2 8 Selecting the speed You can use the adjustment wheel 17 to set the maximum speed you want to reach before and during travel When starting the device always turn the adjustment wheel 17 to the position with the lowest speed and then gradually increase the speed to the desired walking speed e Turn the adjustment wheel 17 in the direction of travel to increase the speed e Turn the adjustment wheel 17 against the direction of travel
55. ving forward and backward You do not have to switch off the viamobil for this purpose Lift the wheelchair by its handles and not by the handle on the control unit or the additional handle When driving over kerbs observe the maximum climbing height specified by the wheelchair manufacturer 10 3 Danger areas and hazardous situations The attendant operating the viamobil must decide in each case whether it is safe to use the add on drive for the intended trip based on issues such as driving experience and physical strength Before undertaking a trip check the viamobil wheels for damage and proper inflation Also check the battery charge level the proper operation of the control elements and the manual brakes on the wheelchair These safety checks and the experience of the attendant operating the viamobil are of particular importance in connection with the operation of the add on drive in or near the following danger areas e narrow footpaths steep slopes e g ramps narrow paths along slopes mountain paths e narrow and or steep inclined paths along main roads or near precipices e paths covered with leaves snow or ice e ramps and lifting platforms of vehicles Use extreme caution when driving along quay walls berths and marinas paths and areas near water bridges and dykes without railings Never drive too closely to bodies of water The maximum permissible angle of inclination is 11 5 per cent at a maximum payload of 160 kg Greater s
56. wheelchair on soft ground e g loose chipping sand mud snow ice or deep puddles Observe the safety and hazard information provided in the individual chapters of the operating manual 1 4 Standard scope of delivery Drive unit e Control unit e Automatic charger e Battery pack e Operating instructions 1 5 Optional accessories er Anti tippers e Additional push handles We recommend using only original accessories supplied by Ulrich Alber GmbH The viamobil is designed in such a way that best performance is achieved when using Alber original accessories Ulrich Alber GmbH shall not be liable for damage to the product or accidents e g fire caused by a malfunction of non original accessories or spare parts e g fire due to explosion of the battery pack leaks etc The warranty does not cover repairs for damage caused by the malfunction of non original accessories Ulrich Alber GmbH will however carry out such repairs for you at a charge 1 6 The main elements at a glance please fold out overview drawing in document cover Drive unit Lower bolt 1 Mount 2 Upper bolt 3 Push handle holder 4 Carrying handle 5 Releasing device 6 Drive wheel 7 Holder for anti tippers 8 Battery pack Battery pack housing 9 Battery pack display 10 Automatic charger control unit connection 11 Releasing device 12 Control unit Control unit housing 13 ON OFF button 14 Sensor field anti theft protection 15 Display 16 Adjustment whee
57. you encounter any problems with your viamobil contact your authorised specialist dealer or Alber agent 11 3 Disposal This device its battery pack and accessories are durable products They may however contain substances that are hazardous to the environment if the parts are disposed of in locations e g landfills that are not designed for the disposal of such materials according to the applicable statutory regulations The product is labelled in accordance with European Directive 2002 96 EC WEEE Directive with a crossed out rubbish bin symbol reminding you that it must be recycled EES Please take care of the environment and return the product at the end of its service life to your local recycling centre As this product is not covered by the regulations of the WEEE Directive in all European countries please inform yourself of the applica ble waste disposal regulations in your country In Germany the product is for instance classified as a transport vehicle and thus not covered by the Electrical and Electronic Equipment Act implementing the WEEE Directive Alternatively return the product to your authorised specialist dealer or Alber agent for proper and safe disposal 11 4 Re use If your viamobil has been provided to you by your health insurance company and you do not need it any longer please contact your health insurer Alber agent or authorised specialist dealer Your viamobil can then be given to somebody else Before t

Alber Viamobil V25 User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents