User Manual
Contents
1. SpectroL ED INTRODUCTION Thank you for choosing a Genaray SpectroLED Studio Light The SpectroL ED Studio light features a sturdy metal housing and produces bright consistent professional quality light in a compact form The Studio series LED lights are available in 500 LED and 1012 LED versions Each version comes in two variations Daylight and Bi Color The Daylight version generates a 5600 daylight balanced light and includes a tungsten filter to balance the light to 3200 K The Bi Color version has a variable color temperature that allows you to choose a color temperature from 3200 K to 5600 K Each light has a built in dimmer and touch screen control LED lights produce very little heat so the SpectroL ED can be used for extended periods without overheating The SpectroL ED Studio light is a superb modern fixture that will help you raise your lighting solutions to a higher level 2 SpectroLED STUDIO LIGHT USER MANUAL genaral KEY FEATURES Powerful lightweight 900 LED or 1012 LED fixture Daylight version produces 5600 K light and includes a tungsten filter for 3200 K light Bi Color version has adjustable color temperature from 3200 K to 5600 Convenient touch screen controls Daylight version has dimming from 100 to 0 Bi Color version has dimming from 100 to 10 Wireless remote control included genarau Removable mounting knuckle can be positioned for horizontal or ve2. 27 ye e SpectroLED STUDIO LIGHT USER MANUAL oriented down towards the four metal mounts on the fixture The magnets hold it securely in place You can remove it quickly by sliding it off the magnetized areas The 3200 K tungsten filter that s included with the Daylight version of the light also has magnetized mounts at each corner and operates in the same way as the diffusion filter The barndoors can be opened and closed independently to prevent light from scattering to unwanted areas or to precisely control where the light strikes genarauy The two horizontal barndoors contain gel clips You can modify the light with a color or diffusion gel not included Mount a gel by pressing down on the spring loaded clips then sliding one edge of your gel under them and releasing the clip The gel will be held firmly in place You attach the other side of the gel on the opposite door in the same way STORING THE LIGHT When you re finished using the light push the power switch to the Off position Remove the power cord from the fixture by pressing the release button on the top of the connector and pulling the cord out of the fixture Allow a few minutes for the fixture to cool down and then close the barndoors to protect the fixture during transport and storage Always keep the barndoors closed when the light is not in use SpectroLED STUDIO LIGHT USER MANUAL genarauy PRODUCT SPECIFICATIO
3. 0 K On the Daylight version the color temperature is displayed 56009 K but it cannot be changed SpectroLED STUDIO LIGHT USER MANUAL genarauy REMOTE CONTROL A wireless remote control is included with each Studio light It can control both the Daylight and Bi Color light fixtures as well as multiple fixtures at once You can use the remote to increase or decrease light output adjust color temperature Bi Color version only change light output in increments of 2596 Daylight versions only and turn the power on or off GROUPING AND SYNCHRONIZING LIGHTS In order to use the remote it first has to be synchronized to the fixture To sync make sure that the desired fixture is powered on and within range of the remote approximately 65 feet or 20 meters Press and hold the A and D buttons on the remote at the same time The fixture genarauy will emit a long beep indicating a successful synchronization You could also synchronize multiple SpectroL ED fixtures to a single remote allowing you to control all synced lights in tandem Syncing multiple lights works the same as syncing a single one with the desired fixtures powered on press and hold the and D buttons on the remote Note that while syncing all fixtures that are powered on and within range will be synced To sync some lights to one remote and some to another first power on the first group sync them the
4. NS LED Count 1012 Dimensions HxWxL 13 58 x 13 58 x 2 75 345 x 345 x 70 LED Count 1012 Dimensions HxWxL 13 58 x 13 58 x 2 75 345 x 345 x 70 mm SpectroLED STUDIO LIGHT USER MANUAL genarauy LED Count 500 Dimensions HxWxL 7 48 x 13 58 x 2 75 190 x 345 x 70 mm genarauy LED Count 500 Dimensions 7 48 x 13 58 2 75 190 345 x 70 mm SpectroLED STUDIO LIGHT USER MANUAL 19 ONE YEAR LIMITED WARRANTY Genaray provides a limited warranty the original purchaser that this product 15 free from defects in materials and workmanshipunder normal consumer use for a period of one 1 year from the original purchase date or thirty 30 days after replacement whichever occurs later Genaray s responsibility with respect to this limited warranty shall be limited solely to repair or replacement at Genaray s discretion of any product that fails during normal consumer use Inoperability of the product or part s shall be determined by Genaray If the product has been discontinued we reserve the right to replace it with a model of equivalent quality and function To obtain warranty coverage contact Genaray to obtain a return merchandise authorization number and return the defective product to Genaray along with the RMA number and proof of purchase Shipment of the defective product is at the purchaser s own risk This warranty does not cover dam
5. age or defect caused by misuse neglect accident alteration abuse improper installation or maintenance EXCEPT AS PROVIDED HEREIN GENARAY MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE This warranty provides you with specific legal rights and you may also have additional rights that vary from state to state Copyright 2013 Genaray www genaray com gt Geli WAY
6. arts provided by the manufacturer Make sure the item is intact and that there are no missing parts All photos are for illustrative purposes only SpectroLED STUDIO LIGHT USER MANUAL 5 PRODUCT OVERVIEW E Barndoors Magnetic Filter Diffuser Mounts a Mounting Knuckle 6 SpectroLED STUDIO LIGHT USER MANUAL genaral SP S 500 Filters SP S 1000 Filters Wireless Remote Control HEN E E e Magnetic Diffusion Locking Flange Filter Large Locking Wheel Eng Magnetic Tungsten Tightening Knob Ratchet Handle Filter generauy SpectroLED STUDIO LIGHT USER MANUAL 7 Carry Tilt Handle PRODUCT OVERVIEW Lcd Touch Screen 4 Pin Power Jack Fuse Bay Gel Clips Battery Plate Mounting Holes Switch 8 SpectroLED STUDIO LIGHT USER MANUAL Carry Tilt Handle Battery Plate Mounting Holes 4 Lcd Touch Screen p E Fuse Bay Gel Clips E BH CAE Power Switch SpectroLED STUDIO LIGHT USER MANUAL PRODUCT OVERVIEW MOUNTING THE LIGHT The removable mounting knuckle has a ratchet handle for quick tightening and loosening It can be placed anywhere along any of the four sides of the fixture giving you precise control over placement of the light To use the mounting knuckle insert the locking flange into the enlarged section of the mounting groove that s alo
7. f the light will not respond to any command from the remote control The remote can be used to power the light on or off The remote control uses radio waves so line of sight positioning of the light is not required SpectroLED STUDIO LIGHT USER MANUAL genarauy battery use a small Phillips head Synchronize A D hold D hold screwdriver to remove the screw on Dimmer up A A the back Lift up the back plate and swap out the old battery for a new one Replace the back and securely tighten Color temperature C the screw in place Always dispose of Sa the old battery properly Dimmer down B B Color temperature D down Power On Off D Audio Confirmation A B A B Beep On Off Dimmer 25 Down This function allows for quick power adjustments With the first press of the C button the dimmer will jump to 10096 Each subsequent press will dim the light by 25 It will cycle from 100 then to 75 50 25 and back up to 100 generagy SpectroLED STUDIO LIGHT USER MANUAL 15 MODIFYING THE LIGHT OUTPUT The light from this Studio fixture can be controlled and changed according to the effect you want Barndoors and filters can shape the light or change the color or contrast for precisely the look you want The included diffusion filter has magnetized mounts at each corner It can be easily placed on the fixture by simply positioning it with the magnets TC 27 27
8. ght and the touch screen will illuminate The angled locking 4 pin power connector prevents accidental disconnection of the cable The two included cable management straps can be used to attach the adapter and adapter cable to a light stand The SpectroLED can also operate using a Sony V Type or Anton Bauer Gold battery with an appropriate optional battery plate available separately from Genaray Battery plate mounting holes are located on the back of the fixture Instructions for mounting a battery plate are included with the battery plate SpectroLED STUDIO LIGHT USER MANUAL 11 TOUCH SCREEN CONTROL A touch screen on the back of the fixture gives you convenient control of dimming for the Daylight and the Bi Color versions and of color temperature for the Bi Color version Simple arrow controls are easy to read and easy to use The fixture comes with a protective film covering the touch screen Please remove this protective film before using the light On the touch screen there are two sections the Dimmer and the Color Temperature The Dimmer section arrows are used to change the light output from 100 to 0 for the Daylight version or 10096 to 1096 for the Bi Color version light output can be changed in 196 increments The second section is for Color Temperature On the Bi Color version you can use the arrows to change the color temperature in 100 degree increments from 3200 K to 560
9. n turn them off Then power the second group on and sync those to the other remote When all lights are turned on again each will respond to the correct remote SpectroLED STUDIO LIGHT USER MANUAL 13 Note Since the remote controls the Daylight and Bi Color fixtures differently it is not recommended to sync a single remote to both types of lights Rather use at least two separate remotes in a setup incorporating both Daylight and Bi Color lights To remove a light from a group or to assign a different remote to an existing light you will have to re sync the desired light to a new remote First turn off any lights that you do not wish to change Then follow the usual steps for syncing a new remote turn on only the fixture you wish to change and press and hold the A and B buttons on the remote The light is now synced to the new remote and all associations with the previous remote or group is removed USING THE REMOTE There are four buttons on the remote control All of the functions of the remote are activated by either pressing one button or by pressing two buttons at the same time Each time a remote operation has been successfully executed a red LED on the remote will illuminate and the light fixture receiving the command will emit a beep This beep can be disabled if desired In order to use the remote control the power switch on the light fixture must be in the On position If the switch is set to Of
10. ng each side of the fixture Slide the knuckle to the position you desire and securely lock the large locking wheel With the light mounted on a light stand you can tilt the fixture 180 by loosening the ratchet handle using the tilt handle to position the light and then tightening the ratchet handle You can remove the mounting knuckle from the fixture by loosening the large locking wheel Slde the knuckle to the enlarged section at one end of the groove and remove the locking flange SpectroLED STUDIO LIGHT USER MANUAL genarauy POWERING THE LIGHT The Studio light operates on any 120 220 VAC circuit using the included adapter A built in fuse Located between the power switch and the power connector on the back of the fixture provides overcurrent protection for electric circuits and two spare fuses are included To change the fuse use a small screwdriver to turn the cover of the fuse bay counterclockwise while pressing in Remove the old fuse insert a new fuse into the bay and replace the cover Use a screwdriver to turn the cover clockwise while pressing in To operate the light open the barndoors be sure the power button is Off and plug the power cord into a 120 or 220 VAC circuit Then align the pins in the connector so that the release button is on the top of the genarauy connector and plug it into the power socket on the back of the light Press the power switch to the On position and the li
11. rtical placement Includes easily removable diffuser with advanced light dispersion characteristics Built in barndoors have a hammered silver finish that reflects and intensifies light Built in gel clips on barndoors allow precise light modification with color or diffusion gels Can be powered by Sony V Type or Anton Bauer Cold batteries using optional battery plates SpectroLED STUDIO LIGHT USER MANUAL CONTENTS INCLUDE Genaray SpectroLED Studio fixture Two cable straps 500 1012 LEDs AC power cord and adapter Removable adjustable mounting knuckle with ratchet lock User manual Carry case with shoulder strap Wireless remote control One Year Limited Warranty Diffusion filter Tungsten filter Daylight version only 4 SpectroLED STUDIO LIGHT USER MANUAL generay PRECAUTIONS 2 0 Please read and follow these instructions and keep this manual in a safe place Keep this unit away from water and all flammable gases or liquids Make sure the unit is powered off when plugging it into a power source Use only the correct recommended voltage Do not attempt to disassemble or repair the equipment doing so will void the warranty and Genaray will not be responsible for any damage genarauy Handle the unit with care Do not stare directly at the lights when they are powered on Clean the unit with a soft dry cloth Keep this unit away from children Use only p
Download Pdf Manuals
Related Search