Concise User Manual
Contents
1. YO OY OY YOY Speakers J g E E Ool bO GO EAR Loi LR y e _CRIPR IDEOOUT AUDIOOUT VIDEOOUT A DIOOUT AUDIOOUT COMPONENT VIDEO OUT ae with an AUDIO IN a amplifier Si amp aso fon i VCRI DVD player AWARNING P Do not disassemble or modify the projector and accessories gt Be careful not to damage the cables and do not use damaged cables ACAUTION P Turn off all devices and unplug their power cords prior to connecting them to projector Connecting a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction or damage to the device and the projector gt Use appropriate accessory or designated cables Ask your dealer about non accessory cables which may be required a specific length or a ferrite core by the regulations For cables with a core only at one end connect the end with the core to the projector gt Make sure that devices are connected to the correct ports An incorrect connection may result in malfunction or damage to the device and the projector NOTICE P Use the cables with straight plugs not L shaped ones as the input ports of the projecto2. in the CD and run through the suggested checks If this does not resolve the problem please consult your dealer or service company They will tell you what warranty condition is applied Please check the following web address where you may find the latest information for this projector http www dukane com av NOTE The information in this manual is subject to change without notice e The manufacturer assumes no responsibility for any errors that may appear in this manual e The reproduction transfer or copy of all or any part of this document is not permitted without express written consent Trademark acknowledgment e Mac Macintosh and Mac OS are registered trademarks of Apple Inc e Pentium is a registered trademark of Intel Corp e Adobe and Acrobat Reader are registered trademarks of Adobe Systems Incorporated e Microsoft and Internet explorer Windows Windows NT Windows Vista are registered trademarks of Microsoft Corporation e PowerPC is a registered trademark of International Business Machines Corporation All other trademarks are the properties of their respective owners ENGLISH E
3. 800 225 1741 This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help ENGLISH a INSTRUCTIONS TO USERS This equipment complies with the requirements of the FCC Fed
4. open or remove any portion of the product unless the manuals direct it For internal maintenance leave it to your dealer or their service personnel gt Use only the accessories specified or recommended by the manufacturer gt Modify neither the projector nor accessories gt Let neither any things nor any liquids enter to the inside of the product gt Do not wet the product gt Apply neither a shock nor pressure to this product Do not place the product on an unstable place such as the uneven surface or the leaned table Do not place the product unstably Place the projector so that it does not protrude from the surface where the projector is placed on Remove all the attachments including the power cord and cables from the projector when carrying the projector gt Do not look into the lens and the openings on the projector while the lamp is on gt Do not approach the lamp cover and the exhaust vents while the projection lamp is on Also after the lamp goes out do not approach them for a while since too hot Regulatory notices About Electro Magnetic Interference In CANADA This Class B digital apparatus complies with Canadian ICES 003 In the US and other places where the FCC regulations are applicable Declaration of Conformity Trade name HITACHI Model Number CP D10 Responsible Party Hitachi Home Electronics America Inc Address 900 Hitachi way Chula Vista CA 91914 3556 U S A Telephone Number 1
5. short circuit solder or disassemble a battery e Do not place a battery in a fire or water Keep batteries in a dark cool and dry place e If you observe battery leakage wipe out the leakage and then replace a battery If the leakage adheres to your body or clothes rinse well with water immediately e Obey the local laws on disposing the battery 5 ENGLISH E Arrangement Refer to the illustrations and tables below to determine screen size and projection distance The values shown in the table are calculated for a full size screen 1024 x 768 Screen size diagonal Projection distance 8 ED 2 Screen height e On a horizontal surface e Suspended from the ceiling diagonal Projection distance Screen height Screen height i 41 0385 15 1 757 69 e Keep a space of 30 cm or more between the sides of the projector and other objects such as walls e For the case of installation in a special state such as ceiling mount the specified mounting accessories Q116 and service may be required Before installing the projector consult your dealer about your installation e The screen position may shift after installation if the projector is suspended from the ceiling or other location due to the flexibility of the plastic projector body If readjustment is necessary consult with your dealer or service personnel e The projected image position and or focus may change during warm up approx 30 minutes after the lamp is tur
6. 33MHz Memory 32MB or more Macintosh OS Mac OS 10 2 or later CPU PowerPC Memory 32MB or more CD ROM drive 4x CD ROM drive Display 256 color 640x480 dots resolution Applications Microsoft Internet Explorer 4 0 and Adobe Acrobat Reader 4 0 or later E How to use the CD 1 Insert CD into PC s CD ROM drive ENGLISH Windows In a while Web browser automatically starts Start up window comes up Macintosh 1 Double click on the Projectors icon appeared on the desktop screen 2 When main htm file is clicked Web browser will start and Initial window will appear 2 Click the model name of your projector first and then click language you want from the displayed list The User s manual detailed will open ACAUTION P Only use the CD ROM in a computer CD drive The CD ROM is designed for PC use only NEVER INSERT THE CD ROM INTOA NON COMPUTER CD PLAYER Inserting the CD ROM into an incompatible CD drive may produce a loud noise which in turn MAY RESULT IN EAR AND SPEAKER DAMAGE e After using CD ROM please put it into CD case and keep it Please keep the CD neither in direct sunlight nor in a high temperature and high humidity environment NOTE The information in the CD ROM is subject to change without notice e No responsibility is taken for any obstacle and defect to hardware and software of your PC as a result of the use of the CD ROM e All or Any part of the information in the CD R
7. Dukane Projector 8110H User s Manual concise Thank you for purchasing this projector Please read through this manual before using this product in order to use safely and utilize well the product AWARNING P Before using this product be sure to read all manuals for this product See the Using the CD manual L15 to read the manuals in the CD After reading them store them in a safe place for future reference gt Heed all the warnings and cautions in the manuals or on the product gt Follow all the instructions in the manuals or on the product NOTE In this manual unless any comments are accompanied the manuals means all the documents provided with this product and the product means this projector and all the accessories came with the projector Contents co co Firstof alleen 2 Connecting power supply 8 Entries and graphical symbols explanation 2 Turning on the powet eee 8 Important safety instruction ccccceeeeeee 2 Adjusting the projector s elevator 9 Regulatory notices ccccccssecees 3 Displaying the picture 10 About Electro Magnetic Interference 3 Turning off the power 000 11 About Waste Electrical and Electronic Equipment 4 Replacing the lamp ccccccceees 12 Contents of package 5 Cleaning and replacing the air filter 14 Loading batterie
8. OM must not be copied reproduced or republished without notice to our company 15 Specifications Item Specification Product name Liquid crystal projector Liquid Crystal Panel 786 432 pixels 1024 horizontal x 768 vertical Lens F2 14 f 6 8mm Lamp 180W UHB AC 100 120V 2 8A AC220 240V 1 4A 260 W 35 C Operating Size 333 W x 103 H x 303 D mm Not a a e protruding parts Please refer to the following figure Weight mass approx lapprox 3 5kg sss Computer input port Audio input output port COMPUTER IN1 AUDIO IN1 Stereo mini x1 D sub 15 pin mini x1 AUDIO IN2 Stereo mini x1 COMPUTER IN2 AUDIO IN3 R L D sub 15 pin mini x1 AUDIO OUT R L Ports Computer output port Others MONITOR OUT CONTROL D sub 15 pin mini x1 Video input port mini DIN 4 pin x1 Lamp 456 8110H Filter set UX35971 Mounting accessary HAS AW100 Bracket for ceiling mount HAS 204L Fixing adaptor for low ceilings Optional parts HAS 304H Fixing adaptor for high ceilings Laser remote control RC R008 Cable cover CCAW100 For more information please consult your dealer Troubleshooting Warranty and after service If an abnormal operation such as smoke strange odor or excessive sound should occur stop using the projector immediately Otherwise if a problem occurs with the projector first refer to the Troubleshooting of the Operating Guide
9. amp will light up and the POWER indicator will begin blinking in green When the power is completely on the indicator will stop blinking and light in steady green INPUT STAN DBY ON Olo o i OF Os OS Gioi O Bie OIO OF g o OOO AWARNING PA strong light is emitted when the projector s power is on Do not look into the lens of the projector or look inside of the projector through any of the projector s openings NOTE Please power on the projector prior to the connected devices e The projector has the DIRECT POWER ON function which can make the projector automatically turn on For more information please see the Operating Guide in the CD Adjusting the projector s elevator When the place to put the projector is slightly uneven to the left or right use the elevator feet to place the projector horizontally Using the feet can also tilt the projector in order to project at a suitable angle to the screen elevating the front side of the projector within 3 degrees This projector has 2 elevator feet and 2 elevator buttons An elevator foot is adjustable while pushing the elevator button on the same side as it 1 Holding the projector push the elevator buttons to loose the elevator feet ENGLISH Position the front side of the projector to the desired height Release the elevator buttons in order to lock the elevator feet After making sure that the elevator feet a
10. buttons then press the cursor or the ENTER the RESET button A dialog will appear 3 Press the cursor button to select the OK on the dialog It performs resetting the filter time AWARNING P Before taking care of the air filter make sure the power cable is not plugged in then allow the projector to cool sufficiently gt Use only the air filter of the specified type Do not use the projector without the air filter or the filter cover It could result in a fire or malfunction to the projector gt Clean the air filter periodically If the air filter becomes clogged by dust or the like internal temperatures rise and could cause a fire a burn or malfunction to the projector Stitched side NOTE Please reset the filter time only when you have cleaned or replaced the air filter for a suitable indication about the air filter e The projector may display the message such as the CHECK THE AIR FLOW or turn off the projector to prevent the internal heat level rising Using the CD manual The other manuals for this product are written into the included CD ROM titled User s Manual detailed Before using the CD ROM please read the following ea to ensure the proper use E System requirements The system for using the CD ROM requires the following Windows OS Microsoft Windows 98 Windows 98SE Windows NT 4 0 Windows Me Windows 2000 Windows XP or later CPU Pentium processor 1
11. em with the new ones To prepare the new filters make contact with your dealer and tell the following type number Type number UX35971 Filter unit When you replace the lamp please replace the air filter An air filter of specified type will come together with a replacement lamp for this projector Turn the projector off and unplug the power cord Allow the projector to sufficiently cool down Use a vacuum cleaner on and around the filter cover Pick and pull up the filter cover knobs to take it off Use a vacuum cleaner for the filter vent of the projector Take the fine meshed filter out while holding the filter Filter ae Pace cover It is recommended to leave the coarse meshed filter in the filter cover as it is Use a vacuum cleaner on both sides of the fine meshed filter while holding it so it will not be sucked in Use a vacuum cleaner for the inside of the filter cover i to clean up the coarse meshed filter If the filters are damaged Filter unit or heavily soiled replace them with new ones Filter cover Or Se Put the fine meshed filter on the coarse meshed one turning its stitched side up N Put the filter unit back into the projector 9 Turn the projector on and reset the filter time using the FILTER Filter TIME item in the EASY MENU course tnestiod 1 Press the MENU button to display a menu Filter fine meshed 2 Point at the FILTER TIME using the A cursor
12. eral Communication Commission equipment provided that the following conditions are met Some cables have to be used with the core set Use the accessory cable or a designated type cable for the connection For cables that have a core only at one end connect the core to the projector CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 01CP D10_CO_ENG_5th indd 3 2009 07 16 17 00 33 Regulatory notices continued About Waste Electrical and Electronic Equipment F The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002 96 EC WEEE The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste but use the return and collection systems available If the batteries or accumulators included with this equipment display the chemical symbol Hg Cd or Pb then it means that the battery has a heavy metal content of more than 0 0005 Mercury or more than 0 002 Cadmium or more than 0 004 Lead Contents of package Your projector should come with the items shown below Check that all the items are included Require of your dealer immediately if any items are missing 1 Remote control with the two AA batteries 2 Power cord 3 Computer cable 4 Lens cover and Strap 5 6 i OHO Os of Ss Qo
13. fter use since it is too hot gt Remove the power cord for complete separation The power outlet should be close to the projector and easily accessible NOTE Please power off the projector after any connected devices are powered off e This projector has the AUTO POWER OFF function that can make the projector turn off automatically For more information please see the Operating Guide in the CD ENGLISH E Replacing the lamp A lamp has finite product life Using the lamp for long periods of time could cause the pictures darker or the color tone poor Note that each lamp has a different lifetime and some may burst or burn out soon after you start using them Preparation of a new lamp and early replacement are recommended To prepare a new lamp make contact with your dealer and tell the lamp type number Type number 456 8110H 1 Turn the projector off and unplug the power cord lamp cover Allow the projector to cool for at least 45 minutes 2 Prepare a new lamp If the projector is mounted on a ceiling or if the lamp has broken also ask the dealer to replace the lamp In case of replacement by yourself follow the following procedure 3 Loosen the screw marked by arrow of the lamp cover and then slide and lift the lamp cover to the side to remove it 4 Loosen the 2 screws marked by arrow of the lamp and slowly pick up the lamp by the handles Never loosen any other screws 5 Insert the new lam
14. lo Ol OOO T fe User s manuals Book x1 CD x1 Security label NOTE Keep the original packing materials for future reshipment Be sure to use the original packing materials when moving the projector Use special caution for the lens Loading batteries into the remote control Please insert the batteries into the remote control before using it If the remote control starts to malfunction try to replace the batteries If you will not use the remote control for long period remove the batteries from the remote control and store them in a safe place 1 Holding the hook part of the battery cover remove it 2 Align and insert the two AA batteries HITACHI MAXELL Part No LR6 or R6P according to their plus and minus terminals as indicated in the remote control 3 Replace the battery cover in the direction of the arrow and snap it back into place AWARNING P Always handle the batteries with care and use them only as directed Improper use may result in battery explosion cracking or leakage which could result in fire injury and or pollution of the surrounding environment e Be sure to use only the batteries specified Do not use batteries of different types at the same time Do not mix a new battery with used one e Make sure the plus and minus terminals are correctly aligned when loading a battery e Keep a battery away from children and pets e Do not recharge
15. ned on or when the ambient conditions change Readjust the image position and or focus as necessary AWARNING P Install the projector in a stable horizontal position gt Place the projector in a cool place and ensure that there is sufficient ventilation Do not place the projector where the air from an air conditioner or similar unit will blow on it directly gt Do not place the projector anyplace where it may get wet gt Use only the mounting accessories the manufacturer specified and leave installing and removing the projector with the mounting accessories to the service personnel gt Read and keep the user s manual of the mounting accessories used ACAUTION P Avoid placing the projector in smoky humid or dusty place gt Position the projector to prevent light from directly hitting the projector s remote sensor NOTE The projector may make a rattling sound when tilted moved or shaken since a flap to control the air flow inside of the projector has moved Be aware that this is not a failure or malfunction Connecting your devices Be sure to read the manuals for devices before connecting them to the projector Make sure that all the devices are suitable to be connected with this product and prepare the cables required to connect Please refer to the following illustrations to connect them PC Monitor RGB OUT RS 232C RGB IN RGB OUT AUDIO OUT AUDIO OUT
16. p and retighten firmly the 2 screws of the lamp that are loosened in the previous process to lock it in place 6 While putting the interlocking parts of the lamp cover and the projector together slide the lamp cover back in place Then firmly fasten the screw of the lamp cover Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu Press the MENU button to display a menu Point at the ADVANCED MENU in the menu using the A Y cursor buttons then press the cursor or the ENTER button 3 Point at the OPTION in the left column of the menu using the A cursor buttons then press the cursor or the ENTER button 4 Point at the LAMP TIME using the A cursor buttons then press the gt cursor or the ENTER the RESET button A dialog will appear 5 Press the gt cursor button to select the OK on the dialog It performs resetting the lamp time ACAUTION PDo not touch any inner space of the projector while the lamp is taken out NOTE Please reset the lamp time only when you have replaced the lamp for a suitable indication about the lamp 12 N N Replacing the lamp continued HIGH VOLTAGE A HIGH TEMPERATURE HIGH PRESSURE AWARNING P The projector uses a high pressure mercury glass lamp The lamp can break with a loud bang or burn out if jolted or scratched handled while hot or worn over time Note that each lamp has a different life
17. pt the appointed marked by an arrow screws e Do not open the lamp cover while the projector is suspended from a ceiling This is dangerous since if the lamp s bulb has broken the shards will fall out when the cover is opened In addition working in high places is dangerous so ask your local dealer to have the lamp replaced even if the bulb is not broken e Do not use the projector with the lamp cover removed At the lamp replacing make sure that the screws are screwed in firmly Loose screws could result in damage or injury e Use only the lamp of the specified type e If the lamp breaks soon after the first time it is used it is possible that there are electrical problems elsewhere besides the lamp If this happens consult your local dealer or a service representative e Handle with care jolting or scratching could cause the lamp bulb to burst during use e Using the lamp for long periods of time could cause it dark not to light up or to burst When the pictures appear dark or when the color tone is poor please replace the lamp as soon as possible Do not use old used lamps this is a cause of breakage 13 ENGLISH a Cleaning and replacing the air filter The air filter has two kinds of filters inside Please check and clean the air filter periodically When the indicators or a message prompts you to clean the air filter comply with it as soon as possible If the filters are damaged or heavily soiled replace th
18. r are recessed NOTE The COMPUTER IN1 2 port can support a component signal also The specific adapter or the specific cable is required for a component video input to the projector ENGLISH ie Connecting power supply 1 Put the connector of the power cord into the AC IN AC inlet of the projector 2 Firmly plug the power cord s plug into the outlet In a couple of seconds after the power supply connection the POWER indicator will light up in steady orange Please remember that when the DIRECT POWER ON function activated the connection of the power supply make the projector turn on AC IN Power cord AWARNING P Please use extra caution when connecting the power cord as incorrect or faulty connections may result in fire and or electrical shock e Only use the power cord that came with the projector If it is damaged consult your dealer to get a new one e Only plug the power cord into an outlet whose voltage is matched to the power cord The power outlet should be close to the projector and easily accessible Remove the power cord for complete separation e Never modify the power cord Turning on the power Make sure that the power cord is firmly STANDBYION button and correctly connected to the projector POWER indicator and the outlet Make sure that the POWER indicator is steady orange Then remove the lens cover 3 Press the STANDBY ON button on the projector or the remote control The projection l
19. re locked put the projector down gently If necessary the elevator feet can be manually twisted to make more precise adjustments Hold the projector when twisting the feet a oS w To loose an elevator foot push the elevator button on the same side as it To finely adjust twist the foot ACAUTION PDo not handle the elevator buttons without holding the projector since the projector may drop down gt Do not tilt the projector other than elevating its front within 3 degrees using the adjuster feet A tilt of the projector exceeding the restriction could cause malfunction or shortening the lifetime of consumables or the projector itself Displaying the picture Activate your signal source Turn the signal source on and make it send the signal to the projector Use the VOLUME VOLUME buttons to adjust the volume To have the projector silent press the MUTE button on the remote control 3 Press the INPUT button on the projector Each time you press the button the projector switches its input port in turn You can also use the remote control to select an input signal Press the VIDEO button for selecting an input signal from the S VIDEO or VIDEO port or the COMPUTER button for selecting an input signal from the COMPUTER IN1 or the COMPUTER IN2 port Press the ASPECT button on the remote control Each time you press the button the projector switches the mode for aspect ratio in turn 5 Use the foc
20. s Using the CD manual oucicecccsicaseceee 15 into the remote control D DPSCMICAVOMS s cdnocecsescsccececanaseceantenenn 16 Arrangement 6 Troubleshooting Connecting your devices T7 Warranty and after service 17 ENGLISH E First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows for safety purpose Please know their meanings beforehand and heed them AWARNING This entry warns of a risk of serious personal injury or even death ACAUTION This entry warns of a risk of personal injury or physical damage NOTICE This entry notices of fear of causing trouble Important safety instruction The followings are important instructions for safely using the product Be sure to follow them always when handling the product The manufacturer assumes no responsibility for any damage caused by mishandling that is beyond normal usage defined in these manuals of this projector AWARNING P Never use the product in or after an abnormality ex giving off smoke smelling strange took a liquid or an object inside broken etc If an abnormality should occur unplug the projector urgently gt Situate the product away from children and pets gt Do not use the product when there is fear of a thunderbolt gt Unplug the projector from the power outlet if the projector is not used for the time being gt Do not
21. time and some may burst or burn out soon after you start using them In addition when the bulb bursts it is possible for shards of glass to fly into the lamp housing and for gas containing mercury to escape from the projector s vent holes gt About disposal of a lamp This product contains a mercury lamp do not put it in a trash Dispose of it in accordance with environmental laws e For lamp recycling go to www lamprecycle org in the US e For product disposal consult your local government agency or www eiae org in the US or www epsc ca in Canada For more information ask your dealer Disconnect the plug from the power outlet e If the lamp should break it will make a loud bang when it does unplug the power cord from the outlet and make sure to request a replacement lamp from your local dealer Note that shards of glass could damage the projector s internals or cause injury during handling so please do not try to clean the projector or replace the lamp yourself e If the lamp should break it will make a loud bang when it does ventilate the room well and make sure not to breathe the gas that comes out of the projector vents or get it in your eyes or mouth e Before replacing the lamp turn the projector off and unplug the power cord then wait at least 45 minutes for the lamp to cool sufficiently Handling the lamp while hot can cause burns as well as damaging the lamp e Never unscrew exce
22. us ring to focus the picture ACAUTION P If you wish to have a blank screen while the projector s lamp is on use one of methods below Use the BLANK function see the Operating Guide Taking any other action may cause the damage on the projector INPUT button VOLUME button VOLUME button MUTE button DBY ON INPUT MEN DI VIDEO button COMPUTER button ASPECT button NOTE The ASPECT button does not work when no proper signal is inputted e For the details of how to adjust the picture please see the Operating Guide in the CD Turning off the power Press the STANDBYION button on the EE ea peA projector or the remote control z Ol The message Power off will appear on p A the screen for about 5 seconds 2 Press the STANDBY ON button again while the message appears The projector lamp will go off and the POWER indicator will begin blinking in orange Then the POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete Attach the lens cover after the POWER indicator turns in steady orange Do not turn the projector on for about 10 minutes or more after turning it off Turning the projector on again too soon could shorten the lifetime of some consumable parts of the projector 10i He 010010 le S Gi vO Oj AWARNING P Do not touch around the lamp cover and the exhaust vents during use or just a
Download Pdf Manuals
Related Search