Home

iConnect Client v3.1 Installation Manual

1. To Remove Folder b The Folder dialog will open Make the changes for the folder Folder X Hame Columns M Message Id V Open Table When Iconnect Starts I Document Id M Sender IV Recipient N M Document Type I Reference Message Id I Timestamp M Status IT Filename Cancel SCN iConnect Client v3 1 Installation Manual 13 of 105 c Click Okto save the changes for the folder Folder X Name My Folder Columns V Message ld T Document Id M Sender MV Recipient M Document Type l Reference Message Id l Timestamp M Status T Filename MV Open Table When connect Starts Cancel 3 How to delete an existing Folder User created folders can be deleted However the folder must be empty before it can be removed a Right click on the folder that will be deleted Select Remove Folder Folders 23N yo EMC Folder Acknowledgment Inbox Outt dd Folder Sen Edit Folder b Click OK to confirm the deletion of the folder 2 Are you sure you want to delete folder My Folder Cancel B Message Table Panel The messages in each folder can be seen on the Message Table panel To open a Message Table panel click on the folder to open from the Folder panel A Message Table panel will appear with a tab labeled with the same name of the folder a Folders 53 a My Folder 2 a E Fol
2. Save in E Desktop gt ff ec Eee My Documents My Computer History My Network Places ha Desktop PN My Documents My Computer ao we File name otientLog_0231_part2 log see My Network ES Save as type log X Cancel SCN iConnect Client v3 1 Installation Manual 100 of 105 VII Appendix Notes on Proxy Server Setup The iConnect Client System is a stand alone Java application that is capable of sending and receiving messages to from a secured web server iConnect Client is dependent on the environment settings in the Java Virtual Machine or JVM and by default the JVM is configured for a proxy server access By using the Connection Settings dialog window the JVM is configured for proxy server access The JVM only supports Hypertext Transfer Protocol over Secure Socket Layer or HTTPS proxy settings using the Host IP Address and Port parameters Proxy server authentication is done with Java s http proxy settings which include a username password Host and Port parameters In the case of the iConnect Client System the web server is accessed through an https connection If the computer used is behind a firewall the proxy server must handle HTTPS requests to visit a secure Web site on the Internet However there is one significant difference between a proxy server processing HTTP requests and HTTPS requests For HTTP requests the proxy server is able to parse the communication content and
3. Export Message is a task that exports the content of a message into a file using the parameters set for this task This task only applies to message found in the Inbox folder of the iConnect Client with RECEIVED status a Right click on Export Message from the Task dialog and select Add New Export Task from the popup menu Apply Updates Send Message b An Export Message Task dialog will open Export Message Task X Document Type x Export As id csv FILE Destination Directory E I Overwrite Existing File Carcel _ SCN iConnect Client v3 1 Installation Manual 54 of 105 c Enter the type of message to be exported on the Document Type field Installed XML document types can be selected from the list by clicking the button Export Message Task X Destination Directory E M Overwrite Existing File Carcel _ d Select the type of file where the content of the messages will be exported to These types are as follows CSV FILE export content of the XML document message as a comma separated value file XML FILE export content of the XML document message as an extensible markup language file HTML FILE export content of the XML document message using a stylesheet FILE export the content of the message as is Export Message Task X Document Type ORDERS ver 1 0 z THTML FILE w XML FILE FILE oo O
4. Lock Current Settings Iv ela When IConnect Start I Minimize To System Tray cancel _ b Click the Ok button to save the changes made Lock Current Settings IV Minimize When IConnect Start I Minimize To System Tray Ok A Cancel K 4 How to set the iConnect Client to minimize to the system tray The iConnect Client has the option to set itself minimized to the system tray to cut down memory usage of the application when it is minimized a Mark the Minimized To System Tray checkbox on the Connect Preference dialog IConnect Preferences X Lock Current Settings I Minimize When IConnect Start Iv ol To System Tray iS cmo b Click the Ok button to save the changes made Lock Current Settings Minimize When IConnect Start MV Minimize To System Tray Cancel SCN iConnect Client v3 1 Installation Manual 88 of 105 When minimized the iConnect Client can be accessed through the icon on the system tray The same menus under the Action menu of the iConnect Client is available from the icon by right clicking on it Se ee es Restore Send And Receive Receive Send Import Message Find Message Start Scheduler Hack Settings SNS Sous Exit Receive Send Import Message s vr Find Message 5 Start Scheduler t iy alae Senings Exit i 9 2 11 50 V How to update the iConnect Client The iConnect Cli
5. Click Option Find on the menu bar of the Log Viewer dialog i 31 10 54 59 INFO Loading Loc 4 31 10 54 59 INFO Loading Me Log Files 07 31 10 55 19 INFO Loading Mo 07 31 10 55 19 INFO Loading Rec one Pal NTA AN CO AN RIO aadi clientLog 0403_part3 SCN iConnect Client v3 1 Installation Manual 98 of 105 b Enter the text to search within the opened log file Find ERROR MV Ignore Case Close c Mark the Zgnore Case check box if the search is not case sensitive Find ERROR AS oe d Click the Find button to start the search This will search from the present location of the cursor up to the end of the log file Find ERRORI V Ignore Case e Click the Close button to end the search Find ERROR IV Ignore Case Close k 3 How to save a log file a Open the log file that will be saved then click Fife Save As on the menu bar of the Log Viewer dialog File Option Iper Log Files clientLog 0403 parts clientLog_0403_part2 07 31 10 55 19 INFO Loading clientLog_0403_part 07 31 10 55 1 g INFO Loading S 07 31 10 55 19 INFO Loading 07 31 10 55 19 INFO Loading D SCN iConnect Client v3 1 Installation Manual 99 of 105 b A file dialog will open Select the directory and filename to save the log file Click the Save button of the file dialog to save the log file Save As 2 x
6. Destination Directory HTML FILE FILE M Overwrite Existing File Corcel _ The iConnect Client will automatically export the content of the message as FILE for non XML documents Content of the messages exported as FILE will be saved using its original file name On the other hand contents of the messages exported as CSV XML or HTML FILE will be saved using a generated file name based on the details of the message Refer to How to set up Export XML File Name Templates on section IV F 3 for details on generating file names SCN iConnect Client v3 1 Installation Manual 55 of 105 f Set the directory to save the exported content Click on the button to open the Directory List dialog Directory List X On the Directory List dialog click the Add button Directory List X Ok Cancel g The Directory dialog will open Click on the screenshot of browse button and select the directory from the list Click OK to confirm the selected directory H My Computer a E 3 Floppy 4 E canes kad B aa Documents and Settings E De Program Files Oo RECYCLER ee Ka HARISA Ae A Folder exported Make New Folder A Cancel i 2 h Exported files can be segregated based on the file name the content of the message will be exported to Enter the directory pattern that will be used for creating subdirectories for the exported files Refer to File
7. HTML File Name ADINVC ver 1 0 XML 1 sender sender last_index_off sender length 1 lt if mes of Test Templates lt Hlist data as row gt lt list row as item gt lt Hif item_index 0 gt lt H ORDERS ver 1 0 ML RETANN ver 1 0 CSV RETANN ver 1 0 HTML RETANN ver 1 0 ML 4 Revert To Default CSV Format Revert To Default Test Templates cancel The default file name template for the document type ORDERS version 1 0 with a CSV file type will generate this file name senderGin_2005 08 27T23 00 51 7149Z scn1 scn ph ORDERS csv Click Ok to save the changes on the template Exporter XML Template Settings x ADINYC ver 1 0 CSV ADINYC ver 1 0 HTML File Name A 1 sender sender last_index_off sender length 1 lt if mes NYC ver 1 0 RS ver 1 DI lt ML RDE 0 CSV ur 19 Ye y l ORDERS ver 1 0 HTML ORDERS ver 1 0 ML RETANN ver 1 0 CSV RETANN ver 1 0 HTML Revert To Default Test Templates RETANN ver 1 0 ML 4 Howto set up Export CSV Generator Template The CSV template defines how the CSV file will be generated for this type of message Only CSV file types have these templates Knowledge of Freemarker http freemarker sourceforge net is needed when editing the templates Click the Settings Export XML Template from the menu bar to open the Export XML Template Settings dialog eF SCN iConnect Client Oliv
8. INFO Load EEN 04 03 20 31 40 INFO Load clientLog_0403_part K 04 03 20 31 40 INFO Load clientLog_0403_part1 04 03 20 31 40 INFO Load 04 03 20 31 40 INFO Load 04 03 20 31 40 INFO Load 04 03 20 31 40 INFO Load 04 03 20 31 40 INFO Load 04 03 20 31 41 WARNING java io FileN otF oundE xcepti at ph net iconnect xmlAb SCN iConnect Client v3 1 Installation Manual 97 of 105 If the log file is not found within the logs directory of the iConnect Client click Fite Open on the menu bar of the Log Viewer dialog Open Ctrl 0 Sr Log Files Ey 04 03 20 31 40 INFO Loz mA clientLog 0403 part3 aa a ama NA AN AM IRIE aa A file dialog will open Locate and select the log file to open Click the Open button of the file dialog to open the log file Open Log File 2 x Look in a old logs ae clientLog_0231_part2 log File name cientLog_0231 _part2 log Open N My Network P Files of type log X ance Log files can be updated by clicking Option Refresh on the menu bar of the Log Viewer dialog File Option Find 54 59 INFO Loading Lo Fiefesh ES 54 59 INFO Loading Me k Log Files 07 31 10 55 19 INFO Loading Mc meg 07 31 10 55 19 INFO Loading Re 07 31 10 55 19 INFO Loading Sc clientLog_0403_part1 107 31 10 55 19 INFO Loading Sc E 07 31 10 55 19 INFO Loading Se 07 31 10 519 INFO nadinn Ne 2 Howto find a text ina log file a
9. Olivers prepackage PLUGIN DOWNLOADED Update Description Size 834 kb Priority PLUGIN Status DOWNLOADED Date Downloaded 3 Apr 2006 08 14 PM Olivers configurations including ExecuteTask and ReplicateSettings components 5 The selected patches will be installed before the iConnect Client starts A dialog will open to show the progress of the installation Details of the installation process are saved in the file patcher log in the directory where the iConnect Client is installed Close i Remove From List Import Update L Installing 1 of 1 Cancel 6 The iConnect Client will start after the installation has completed All patches that have been successfully installed will be removed from the list of patches to be installed How to view installed components in the iConnect Client The iConnect Client keeps a record of all the components and patches installed Click Help Applied Updates on the menu bar of the iConnect Client to view all patches installed ect Client Olivers Super Store Settings View Help Download Updates View Installed Updates knowledgment stem Advisory ish SCN iConnect Client v3 1 Installation Manual 94 of 105 This dialog will open View Installed Updates X Sel Name Priority Status L Ad Invoice ADINVC v1 0 PLUGIN APPLIED C Olivers prepackage PLUGIN APPLIED _ Purchase Or
10. Phone Number Retry p Delay seconds p Timeout minutes p 4 LAN Proxy Settings Ok Cancel 1 How to set up the Dial up Connection Dial up accounts can be set up in the iConnect Client These accounts will be used whenever the iConnect requires an internet connection The program will automatically initiate the dial up connection and disconnect it when the program is finished using the internet connection SCN iConnect Client v3 1 Installation Manual 38 of 105 a To add a dial up account click the Add button in the Connection dialog Connection a a Move Up Dial up Entry E PL rite RIAI ee HOU SEn anes Misa marssieyeh ony Berrini WSer Agent SCN iConnect Client v3 1 Installation Manual 39 of 105 c Enter the following details of the dial up account Entry Name Enter a name for this dial up account Phone Number Enter the phone number of the dial up account User Name Enter the user name of the dial up account Password Enter the password of the dial up account Dial up Entry x Entry Name Tinternet ISP Phone Number 4523333 User Name tgek21 yh isp Password eres T Enable proxy settings Gey Women UsenAgent JiConnect Client 3 1 1 X Corcel d Ifthe dial up connection requires connecting through a proxy select the Enable Proxy Settings checkbox to configure the required proxy connect
11. SCN iConnect Client v3 1 Installation Manual 43 of 105 d Click the Ok button to save the details of the proxy connection CM Enable proxy settings Proxy URL 92168 0101 000 Proxy Port aa 2C t i lt 2 3B Proxy User Name juse sts lt S C C Proxy Password ican Proxy Domain PC User Agent 3 How to set the Connection Timeout The connection timeout is the amount of time before the iConnect Client disconnects from the server after it has been idle or waiting for a response from the server The connection timeout can be set on the Timeout field in minutes Connection Ea Enty Name Phone Number Internet ISP 4523333 Internet ISP2 4539999 Edit a a pe piran Add Remove Move Up Retry Jog Delay seconds os imeout minutes or LAN Proxy Settings iN cancel C How to set up the Contact List The Contact List in the iConnect Client contains a list of entities that exchanges messages with the user The iConnect Client uses this information to display the names of the entity instead of their party Ids The Contact List may also contain lists of internal codes for the entity to easily identify the recipient of a file when importing non XML documents Click Tools Contact List from the menu bar to open the Contact List dialog WF SCN iConnect Client Olivers Action Tools Settings View Help Scheduler h O Inbox My
12. System Advisory contains messages received from the server that has a document type of System Advisory Trash contains messages that have been deleted 1 How to create a new Folder New folders can be created if the user sees the need for it a Right click on the folder that will be the parent of the new folder Select Add Folder Folders x 7 O System Advisory O Trash b A Folder dialog will open Enter the name for the new folder Name My Folder N ka Columns 7 Message Id T Document Id Sender l Recipient T Document Type Reference Message Id Timestamp Status IT Filename l Open Table When Iconnect Starts cancel _ SCN iConnect Client v3 1 Installation Manual 11 of 105 c Select the columns that will be present when viewing the content of the folder d The new folder can be automatically opened when the iConnect Client has started by marking the Open Table When Iconnect Starts checkbox e k a i SCN iConnect Client v3 1 Installation Manual 12 of 105 The example above will produce this output gt Folders 33 Folder Acknowledgment Inbox 2 How to edit an existing Folder Existing folders can be edited except for the folder s name a Right click on the folder that will be edited Select Edit Folder D Folders 23 E Folder Acknowledgment O Inbox
13. g Click the Ok button to save the changes Identity Entry X Party ID http wwww gs ph org party 4805305730269 Company Name Olivers Super Store Key Store Import Export View Password p pre Change Generate New Keystore I Ask For Password When IConnect Starts Cancel 3 How to export an existing Keystore It is important to keep a back up of the Keystore for security reasons and to prevent the hassle of creating a new Keystore SCN iConnect Client v3 1 Installation Manual 34 of 105 a On the Identity Entry dialog click the Export button for the Keystore field Party ID http wuww gs ph org party 4805305730269 Company Name Olivers Super Store ka Password ema Generate New Keystore I Ask For Password When IConnect Starts Ok Cancel b A file dialog will open Select the location and name of the file that will be used to save the Keystore Click the Save button to export the Keystore into the selected file Select key store file 2 x Save in a keys x e ae EA A History amp Deskto PN tama My Documents My Computer SAGI File name olivers key ks My Network P Save as type k 4 How to change the Keystore Password The Keystore password may be changed if the user sees the need for it However this change will only take effect on the Keystore that is imported in the iConnect Client This change will not affect the othe
14. Client v3 1 Connect Client c oj m g Ks _ ban a a gt lt w om Ug T A amp Accessories 2 I Administrative Tools gt gt E Startup 3 X Adobe Reader 7 0 BD Outlook Express T iConnect Client fri Log Viewer JB Uninstall iConnect Client SCN iConnect Client v3 1 Installation Manual 9 of 105 The iConnect Client splash screen will open Recycle Bin Oe iit iConnect Client y 3 k ff Trash 08 02 12 38 16 INFO Loading DeleteMessageTask 08 02 12 38 16 INFO Loading ExportMessageTask 08 02 12 38 16 INFO Loading ConnectionGui 08 02 12 38 17 INFO Loading Patcher SCN iConnect Client v3 1 Installation Manual 10 of 105 III What is the iConnect Client interface The iConnect Client consists of the Folder panel Message Table panel and the Realtime Logger panel Folder Panel The Folder panel shows all the folders in the iConnect Client By default the iConnect Client has the following folders which contain messages based on their status and document type Acknowledgment contains messages received from the server that has a document type of Acknowledgement or Error Inbox contains messages received from the server that do not have the document type of Acknowledgement Error or System Advisory Outbox contains created messages that are ready to be sent to the server Sent contains messages that have been sent to the server
15. Client v3 1 d O iConnect Client Be iConnect Client k Log Viewer 5 Uninstall Connect Client be Settings Search C 2 Y a 2 a Qo lt wh D The Log Viewer can also be opened through the iConnect Client Click Tools Log Viewer on the menu bar of the iConnect Client SCN iConnect Client v3 1 Installation Manual 96 of 105 SCN iConnect Client Test Client Action Tools Settings View Help GS Fo TEDE I utbox Message Ic D Inbox O Outbox Sent O System Advisory O Trash DK This is the Log Viewer dialog amp Log Viewer O x File Option Folders Log Files 1 Howto open a log file Select the folder that contains the log file that will be opened from the upper left side of the Log Viewer dialog Only the folders under the logs directory in the iConnect Client are listed here Log Files clientLog_0403_part3 clientLog_0403_part2 clientLog_0403_part1 A list of log files that are found in the selected folder will appear at the lower left side of the Log Viewer dialog Select the file that will be opened 04 03 20 31 16 INFO Load 04 03 20 31 37 INFO Load 2006 08 04 03 20 31 37 INFO Load 04 03 20 31 37 INFO Load 04 03 20 31 38 INFO Load 04 03 20 31 38 INFO Load 04 03 20 31 38 INFO Load 04 03 20 31 38 INFO Load 04 03 20 31 38 INFO Load 04 03 20 31 38 INFO Load Log Files 04 03 20 31 40
16. Inbox Receive Message Send Message Cancel f The sequence of the task will be in the same order of the execution of tasks Click the 41 or buttons to move the selected tasks up or down the list respectively Create Task Group x Group Name fSend And Receive Tasks Import Message REPORT Send Message I Stop Running When An Error Has Occurred Cancel _ g The Task Group can be interrupted when an error has occurred within a task avoid this by marking the Stop Running When An Error Has Occurred checkbox Create Task Group X Group Name Send And Receive Tasks Import Message REPORT Send Message Receive Me ss s age Export Message ORDERS ver 1 0 KEE Vv el Running When An Error Has Occurred A cmo SCN iConnect Client v3 1 Installation Manual 68 of 105 h Click Okto create the new Task Group Create Task Group X Group Name Send And Receive Tasks Import Message REPORT eF SCN iConnect Client Olivers Sup iew Help Import Message Find Message Start Scheduler Wrlack Settings Exit The Send And Receive Task Group will do the following tasks in this order Import Message REPORT Send Message Receive Message and finally Export Message ORDERS ver 1 0 This Task Group will stop if an error happens during the execution of the said tasks 2 How to edit an existing Task Group Existing Task Gr
17. L Execute Task PLUGIN DOWNLOADED Update Description Remove From List Install Close Import Update X SCN iConnect Client v3 1 Installation Manual 91 of 105 3 A file dialog will open Locate and select the update file to import Look In CA instan 7 cos le ca leel G Olivers conf patch File Name lOlivers conf patch Files of Type iConnect Client Update Files v ree 4 Click the Open button to import the selected file Look In install ca Ex co eE C Olivers conf patch File Name Olivers canf patch Files of Type iConnect Client Update Files k A je The selected file will be copied to the patches directory where the iConnect Client is installed It will also appear on the list of updates that is available for installing Select Updates to Install X Update Description Size 834 kb Priority PLUGIN Status DOWNLOADED Date Downloaded 3 Apr 2006 08 14 PM Olivers configurations including ExecuteTask and ReplicateSettings components Remove From List Import Update Install Close SCN iConnect Client v3 1 Installation Manual 92 of 105 D How to install an update Click Help Install Updates from the menu bar of the iConnect Client t Client Olivers Super Store jettings View Help D kA ALLET E
18. Name Patterns in section VII B for details and examples on file name patterns Import Message Task report c 3 txt SCN iConnect Client v3 1 Installation Manual 48 of 105 e Choose the location of the files to be imported on the Source Directory field by clicking on the button Import Message Task report d 3 txt REPORT N ER f When a file has been imported it will be moved to the directories listed on the Archive Directory field Set the directories to save imported files Click on the button to open the Directory List dialog Directory List Move Uo Move Vor SCN iConnect Client v3 1 Installation Manual 49 of 105 h The Directory dialog will open Click on the button and select the directory from the list Click OK to confirm the selected directory Select Ki X Select target directory Direc E 4 My Computer dB 3 Floppy A H a System C ES exported OnE 3 HES Program Files Lee Folder import Make New Folder Cey Cancel i Imported files can be segregated based on their file name Enter the directory pattern that will be used for creating subdirectories for the imported files Refer to File Name Patterns in section VII B for details and examples on filename patterns Leave it blank to
19. Name Patterns in section VII B for details and examples on filename patterns Leave it blank to save the content of the message in the selected directory Directoy C expoted 0 Patter HENK I cre SCN iConnect Client v3 1 Installation Manual 56 of 105 i Continue to add more directories if the content of the messages needs to be extracted into multiple directories The sequence of the directories will be the same sequence that will be used when exporting the content of the messages Click the Move Up or Move Down to move the selected directories up or down the list respectively Add Edit Remove Move Up dt1 3 Cancel j Click Ok to confirm the list of directories that will be used to export the content of the messages Directory List x df1 3 ieee Edit Remove Move Up Cancel k Overwrite the file if it exists by selecting the Overwrite Existing File checkbox When not selected OLD x where x is a sequence number will be appended to the filename of the older file Export Message Task X Document Type i ORDERS ver 1 0 7 Export As csv FILE Destination Directory C exported d 1 3 J C exported backup E Nie Existing File Ok Cancel SCN iConnect Client v3 1 Installation Manual 57 of 105 Click the Ok button to save the details of the new Export Message Task Expor
20. SCN iConnect Client v3 1 Installation Manual 51 of 105 m Click Okto confirm on the selected recipients Select recipient s Select Al Remove Al Creators Manufacturing O Warehousing Company inc n Overwrite the file if it exists by selecting the Overwrite Existing File checkbox When not selected OLD x where x is a sequence number will be appended to the filename of the older file Import Message Task REPORT report d 3 txt C import report d 3 tet o Click the Ok button to save the details for the new Import Message Task Import Message Task REPORT report d 3 txt C import report d 3 tet Creators Manufacturing SCN iConnect Client v3 1 Installation Manual 52 of 105 p The new Import Message Task will be listed in the lists of tasks under Import Message The details of the created task can be viewed and edited by selecting it Apply Updates Delete Message Document Ippe z RE PORT Export Message El Import Message File Name Pattern Jreport d 3 txt Move Mess Source Director C import a Receive Message Send Message Archive Directory C import report d 3 txt eal Recipient s Creators Manufacturing BI MV Overwrite Existing File Cancel _ This is what will happen when this Import Message Task is executed The Import Message REPORT will create messages of type REPORT
21. Task dialog will open Source Folder i es Target Folder z J Units F fo Timestamp Difference p I Move Unread Messages c Choose the location of the messages that will be moved Folders may be selected from the list by clicking the button on the Source Folder field Move Message Task X Source Folder Folder Inbog Falder fi n hn kod Folder My Folder Folder Outbox 1Folder Sent Folder System Advisor Timestamp Difference lo Move Unread Messages Cancel d Choose the destination of the messages Folders may be selected from the list by clicking the button on the Target Folder field Move Message Task X Source Folder Folder Inbox bd Target Folder Falder Jhd ul Falder Folder Outbox Folder Sent Folder System Advisory Folder Trash e Units Timestamp Difference I Move Unread Messages cence e Choose the time place value to consider for the age of the message to move The place value can be in Minutes Hours Days or Months Move Message Task X Source Folder Folder Inbox ba Target Folder Folder My Folder i coca SCN iConnect Client v3 1 Installation Manual 60 of 105 f Enter the age of the message to move on the Timestamp Difference field This is the difference between the time this task was executed as against the timestamp of the message M
22. Templates z he Server M Identity iConnect Preferences O System Advisory O Trash b This is the Export XML Template Settings dialog All installed XML documents are listed on the left side of the dialog Exporter XML Template Settings X ADINYC ver 1 0 CSV ADINYC ver 1 0 HTML ADINYC ver 1 0 KML ORDERS ver 1 0 CS ORDERS ver 1 0 HTML ORDERS ver 1 0 ML RETANN ver 1 0 CSV RETANN ver 1 0 HTML RETANN ver 1 0 ML Cancel _ SCN iConnect Client v3 1 Installation Manual 75 of 105 c The File Name template uses the following data model names to generate the file name messageld the message Id of the message documented the document Id of the message sender the party Id of the sender of the message recipient the party Id of the recipient of the message type name the name of the document type used by the message type format the format of the document type used by the message type version the version of the document type used by the message filename the file name of the content of the message where it was originally imported from d Select the document type that will be edited from the list on the left side of the Export XML Template Settings dialog Exporter XML Template Settings X ADINYC ver 1 0 CSV ADINYC ver 1 0 HTML File Name ADINYC ver 1 0 XML ORDERS ver 1 0 CSV 1 sender sender last_index_off sender length 1 lt if me
23. a month old to Folder Trash 5 How to set up Task for Apply Update Apply Update is a task that installs the content of the message into the iConnect Client This task will automatically restart the iConnect Client to install the update It is recommended that Apply Update Tasks are executed after the other tasks have finished For details on how to make an update file refer to How to create an Update File in section V A a Right click on Apply Updates from the Task dialog and select Add New Apply Updates Task from the popup menu ORDERS ver 1 0 E Import Message REPORT apply update task Move Message Inbox Receive Message Send Message SCN iConnect Client v3 1 Installation Manual 64 of 105 An Apply Update Task dialog will open Apply Update Task X Document Type l oee Enter the type of message to be exported on the Document Type field Apply Update Task X Document Type fICONNECT_SETTINGS Carcel Click the OK button to save the details for the new Apply Update Task Apply Update Task X Document Type fICONNECT_SETTINGS Cancel The new Apply Updates Task will be listed in the lists of tasks under Apply Updates The details of the created task can be viewed by selecting it E Apply Updates ICONNECT_SETTINGS Document ipe ICONNECT SETTINGS E Delete Message X 7 My Folder Export Message ORDERS ver 1 0 El Import Message
24. aes 71 Ze HOWTOS UP EXPO A MLM pp er icn A a dab vetesch sein NE 73 3 Howto setup Export XML File Name Templates ssescesch inode Gaim cetenndiaeienr a aed Se 75 4 How tosetup Export CSV Generator Template sisinieriiiine en wes tai eee ta eee eal 77 53 gt How toset up a Stylesheet for an XML Document seven sotwnstterancnsennaiedeaniten ieia a EEEE ie 79 SCN iConnect Client v3 1 Installation Manual 2 of 105 Ge HOWTO SET UP THE SCHEDULER aanrennen a on Miahnieveataathadvadenoteedaasieteaes 80 Ts How t oschedule a Task Grou iro ola iste hal ie ial nada lasnle ate hae tala ins Ate uae aunt ba tse kale seine add ees canes Lak 80 De Howlostarn Ihe ScheduleT arein A A 84 Be HOWTO SLOP ANC iS CHOCO yet tra eared aE E tats E E detalitiamed sities 85 H HOWTOUSE THE IC ONNECT PREFERENCE cacon te 8 ccaklege cee eee hoe A ee ee hae eae 85 te Howto Tock the Seuines OF NCIC ONNCCL Chent ies ricaccsises ccted sh eae aaunlaled a estes shi Sanu a a a 86 2 Howto unlock he setlings of the 1COnneCl CleONl vais richie rors eee alee a ae eee ee 8 amp 7 3 Howto set the iConnect Client to Start minimized 6c ccc ccc cccccccccccuccuccucceccecuccuceucuecuecuccuceecuecuceuscusensencnes SS 4 How to set the iConnect Client to minimize to the system try ccccccccccceccceeesessetteeeeeecesseeaseesaasaaaeeeeeeeeees 8S V HOW TO UPDATE THE ICONNECT CLIENT esesesesesesecscscoscseseseseseseososososcsososeseseseseoeseososososesosessosososeseso
25. at least a day old to Folder My Folder 4 Howto set up Task for Delete Message Delete Message is a task that moves a message to the Trash folder in the iConnect Client The message is permanently deleted if the message is in the Trash folder Messages are deleted based on the age of the message a Right click on Delete Message from the Task dialog and select Add New Delete Message Task from the popup menu delete message task Move Message Inbox Receive Message Send Message b A Delete Message Task dialog will open Delete Message Task X Folder O Units 7 Timestamp Difference lo I Delete Unread Messages Corcel SCN iConnect Client v3 1 Installation Manual 62 of 105 c Choose the location of the messages that will be deleted Folders may be selected from the list by clicking the button on the Folder field Delete Message Task x Folder y Folder pg cider iiy Foider Folder Outbox Folder Sent Folder System Advisory Folder Trash Tl Delete Unread Messages Timestamp Difference Corcel _ d Choose the time place value to consider for the age of the message to delete The place value may be in Minutes Hours Days or Months Delete Message Task X Folder Folder My Folder 7 I Delete Unread Messagi EMUS coca e Enter the age of the message to delete on the Timestamp D
26. data3 row2 data4 f Click Ok to save the changes on the template Exporter XML Template Settings x ADINYC ver 1 0 CSV ADINVC ver 1 0 HTML FileName 1 sender sender last_index_of sender length 1 lt if mes ADINYC ver 1 0 XML ORDERS ver 1 0 CS ORDERS ver 1 0 HTML ORDERS ver 1 0 ML Hf RETANN ver 1 0 CSV RETANN ver 1 0 HTML Revert To Default Test Templates RETANN ver 1 0 ML CSV Format lt tlist data as row gt lt tlist row as item gt lt tif item_index O gt lt H oil Revert To Default Test Templates Cancel 5 How to set up a Stylesheet for an XML Document Most XML document types have a default stylesheet installed in the iConnect Client Other stylesheets that are made specifically for an entity can be installed as a separate update file Check the list of updates that are available for download or call SCN Technical Support Group Refer to How to Update the 1Connect Client in section V for details on downloading and installing update files SCN iConnect Client v3 1 Installation Manual 79 of 105 G How to set up the Scheduler The Scheduler automates the activities of the iConnect Client by enabling Task Groups to be executed automatically on a specified date and time All events during the scheduled activity can be monitored in the Realtime Logger panel Users can still do other operations while the scheduler is active To open the Scheduler dialog click T
27. iConnect Client System thru the Apply Update Task This plugin requires the Core componenty1 0 or higher Client v1 0 or higher and Patcher v1 0 or higher installed in the iConnect Client System Download Close nh es SCN iConnect Client v3 1 Installation Manual 90 of 105 A message will be posted on the Realtime Logger panel when a patch has been downloaded All downloaded patches will be saved in the patches directory where the iConnect Client is installed Realtime Logger 52 03 24 11 11 27 Received 3 message s 03 24 11 11 46 INFO Deleting message s from Folder 03 24 11 11 46 INFO Message 2006 07 05T09 02 41 788SZ scnl scn ph moved t 03 24 11 11 46 INFO Message 2006 08 02T06 03 59 1359Z scnl scn ph moved tr 03 24 11 11 46 INFO Message 2006 08 02T0O 27 06 8549Z scnl scn ph moved t 03 24 11 11 46 g C How to import an update Update files that have been acquired other than downloading from the server can be imported into the iConnect Client for installation 1 Click Help Install Updates from the menu bar of the iConnect Client t Client Olivers Super Store jettings View Help Do eae iets e L Install Updates sowledgment x older 10 em Advisory h 2 A window will open containing the list of patches that is available for installing Click the Import Update button Select Updates to Install X Sel Name _ Priority Status
28. is applicable for defining details for Message Id Document Id Reference Message Id Document Type and Filename This filter matches the given value based on the chosen mode of comparison e Equal target has exactly the same as the given value e Not Equal target is not the same as the given value e Like target contains the given value Find Message Filter X Message Id ied C Equals C Not Equals Like Value 2006 01 27 Cancel List match This filter is applicable for defining details for Folder Sender Recipient and Status This filter searches the selected value for the detail Find Message Filter X Sender 7 Value ERE Creators Manufacturing Test Client Warehousing Company inc E sel Cancel h Timestamp match This filter limits the search to the timestamp within the given date and time The filter may be set to search before or after the given date and time Find Message Filter X Timestamp C Before After Date ram dd yyyy or 40142006 Time hh mm 02 00 PM Read match This filter limits the search for either read or unread messages Cancel Find Message Filter X Read x Read Messages Only C Not Read Messages Only Cancel SCN iConnect Client v3 1 Installation Manual 26 of 105 d After setting all the filters for the search select the columns that will be displayed
29. njure Install Updates qoWwledgment x older 10 em Advisory h 2 A window will open containing the list of patches that is available for installing Click on a patch to view a description of the patch Select Updates to Install X Sel Name Priority Status Execute Task PLUGIN DOWNLOADED v Olivers prepackage PLUGIN DOWNLOADED Update Description Size 834 kb Priority PLUGIN Status DOWNLOADED Date Downloaded 3 Apr 2006 08 14 PM Olivers configurations including ExecuteTask and ReplicateSettings components Remove From List Import Update Install 3 Select the patches that will be installed by marking the checkbox of the patch Select Updates to Install X p Name Priority Status Execute Task PLUGIN DOWNLOADED iv fOlivers prepackage PLUGIN DOWNLOADED gt a Update Description Size 834 kb Priority PLUGIN Status DOWNLOADED Date Downloaded 3 Apr 2006 08 14 PM Olivers configurations including ExecuteTask and ReplicateSettings components Remove From List Import Update Install Close SCN iConnect Client v3 1 Installation Manual 93 of 105 4 Click the Insta button to install selected patches This will require the iConnect Client to restart Select Updates to Install X Sel Name __ Priority Status C Execute Task PLUGIN DOWNLOADED
30. the message Exported 1 message s The following are the definitions of each type of log Debug This log contains detailed information of the current process Logs in this level will be most helpful for troubleshooting possible error or tracking down activities of the program This level can only be seen in the Log Viewer Info This log contains informative messages that states current status of the current process Warning This log contains messages to warn potentially erroneous process Error This log contains the details of the error Usually these messages are followed by a description and the location of the module where the error has occurred All log files are found in the logs directory where the iConnect Client application is installed All log files are sorted in months and follows a file naming format of clientLog_mmdd_partx log where mmis month dd is date and x is a sequence number How to use the Log Viewer Log files can be viewed through the Log Viewer The Log Viewer checks for possible tampering of the log file for authenticity and completeness The Log Viewer can be opened by clicking Log Viewer icon found in the Start Menu Click Start All Programs Connect Client v3 1 Log Viewer N Accessories gt Administrative Tools gt Ew le _4 Documents n Startup Adobe Reader 7 0 re a Outlook Express p ca Remote Assistance G Windows Media Player Help and Support fH iConmect
31. 4803337760571 File Edit View Favorites Tools Help da Back gt gt i Seach C Folders Address C C exported 4803337760571 Go h 48033377605 gt a ee a f objects 0 bytes j My Computer And second in C exported backup Old files will be will be renamed if the file name already exists File Edit View Favorites Tools Help Back gt 2 Z Search C3 Folders Address C exported backup Go i 48033377605 71_2006 01 2 7703 12 58 12 34Z scni sc in ph ORDERS csv OLD 1 2 abject s 0 bytes Ej My Computer Status of exported messages will change from RECEIVED to EXPORTED Exported messages will also be marked as read 2006 08 0270 IO Outbox O Inbox X N _ Messageld Sender Recipient Document Type Timestamp Status Creators Manuf Olivers Super ORDERS 02 4ug 2 03 5 EXPORTED 3 Howto set up Task for Move Message Move Message is a task that transfers a message to another folder in the iConnect Client Messages are moved based on the age of the message d Right click on Move Message from the Task dialog and select Add New Move Message Task from the popup menu Apply Updates Delete Message Export Message ORDERS ver 1 0 Import Message REPORT SCN iConnect Client v3 1 Installation Manual 59 of 105 b A Move Message
32. 89 As JHOWETO CREATE AN UPDATE FILE sterisoscvecedeecterosbeeie xeconionnedyaea ea hosm A E datas 89 B HOWTO DOWNLOAD AN UPDATE FROM THE SERVER csceccsceccececcscccsceccececcsceceecececcscscscsescesescesescesceseceecess 89 C HOW TOUMPORT AN UPDATE ois scicceco obec or tens ecntia E a neere tomas etna towed Perec beri aena eases aaensadencones 91 D HOWTO INSTALEANTPDATE tore ne a Coie a a E E a 93 E HOW TO VIEW INSTALLED COMPONENTS IN THE ICONNECT CLIENT ccceccscecccceccccecccecscscescscecescescecescecess 94 VI HOW TO KEEP TRACK OF THE ACTIVITIES OF THE ICONNE CT 22 cccccccccccceccccccces 95 As WHAT DO THE BOGS MEAN tinct atc reie Jain A ccs be tinal eta ae ates dad accu teal es FA Saataceeaieuewee es 95 Be JHOWTO USE THE LOG V TB WER vec caste cdtace sac lcaeb a cdeaces ha dente S enews duleaces cada ee AONE 96 Di OVE TOP Open a loo FILO aise tae pga a cece eta ate a a ace ea a te A tan Ms ea SP 97 2 LOW TO nante ANG LOO FUNC els dled acted Sateen asta ld acted sae aig ala ale aaa ade oe 98 T HOwWTOSa ve C100 SUO ra EA pian EA lee a ea ole 99 VII APPEND aior E T 101 As NOIFSON PROXY SERVER SE U a a n a a Aaaa 101 Be P NAE A aa AA 102 SCN iConnect Client v3 1 Installation Manual 3 of 105 I How to install the iConnect Client A What are the system requirements of the Connect Client For optimum running level the iConnect Client System is required to be installed in a computer with the
33. E Dretara ar a si susitia tana tismde stat uucu as Qaladnamianhsinndnavaiieiuacntuiaute 28 IV HOW TOSET UP THE ICONNECT CLIEN DB wiisccsesasieecticenedieneieslecse actin a aaa 28 A JELOMP TO SET UP THE IDENTITY cern A Sea taeuesas segep ie uucss oaemese yetadiete A O ENA 28 Be SHOW IOC CNET AIC NEW KC SIONS amekemea E a E R eee eees 29 Ze SLOW TO IM OTL AH CXISTING KEV TONO i crsesnt ceca ace Sachs ces ses arecluct ta inne deceit Gh ana ak eeesane dasleane Saeco eas ease 32 3 Howto expor GMVCNISTINIS RCV STORC iara ae fren oe canada saan Saree cee ee 34 A Howto cehangethe Keystore PASS WOT worse cece cen cons sassastens mrenteccen cats aa eee ees aa ee 35 5 How to enable the iConnect Client Password Protection cccccccccccccececceeeeetetee cece eee eeeeaeaeasaaeasaaaaaaaeeeeeeees 37 Pe HOWTO SE LUPE CONNECTION yete e a N sinh E N S N 38 1 How to setup the Dial up Connection cccccccccccccccccccccccccc cece cece cece cece cece cece cece beck EEE EEE E ELLE EEE E EEE E EEE E ELLE ELLE BEEBE 38 2 Howto set up the Local Area Network LAN Proxy Connection oeer 42 3 How IO Ser the Connection TMC OUT sak ssid seers seeala tri dae tacedaslac sok we seid NRS AE we Re oes 44 Ce JHOW DOSE UP THE CON FAC FIGS Ties cetas has teunsiaaidsraiea el isi avec low Memiiutandsnniss ie tali N 44 IDs SHOW TOSET UR ACT AS Kj icassisnresh santos inins a eoasseay june oa seausbauy N A 47 1 How to setup Task for Import Message ois coi catenin Sea ooin tain nite
34. Folder SCN iConnect Client v3 1 Installation Manual 44 of 105 This is the Contact List dialog Contact List a WIP Fl Kod ILS ie 1 Contact List hits FANN AEA warehousing Comper inc http www gs1 ph org party STGD Group enG We Contact Entry SCN iConnect Client v3 1 Installation Manual 45 of 105 Enter the following details for the new contact A contact must at least have a Party Id and Company Name defined in the Contact Entry dialog Party Id Enter the complete party Id of the new contact A party Id is composed of the party Id prefix usually http www gsiph org party and the GLN of the new contact Company Name Enter the name of the organization of the new contact Company Code Enter the internal codes associated to the new contact if there are any Multiple codes can be placed separated by a comma Business Type Enter the type of organization of the new contact Address Enter the address of the new contact City Town Enter the city or town of the new contact Province Enter the province of the new contact Country Enter the country of the new contact Telephone Number Enter the telephone number of the new contact Fax Number Enter the fax number of the new contact Mobile Number Enter the mobile number of the new contact Email Address Enter the email a
35. REPORT E Move Message Inbox Receive Message Send Message cancel _ This is what will happen when this Apply Updates Task is executed The Apply Updates ICONNECT_SETTINGS will export the patch file contained in the messages of type ICONNECT_SETTINGS found in the iConnect Client folder Folder Inbox with a status of RECEIVED as FILE into the patches directory where the iConnect Client is installed The iConnect Client will shut down and install the exported patch file The iConnect Client will reopen when the installation has completed SCN iConnect Client v3 1 Installation Manual 65 of 105 6 How to set up Send Message Task Send Message Task uploads all the messages found in the Outbox folder of the iConnect Client with a status of PREPARED No configuration is needed for this task 7 How to set up Receive Message Receive Message Task downloads Task all the messages from the server Messages of type Acknowledgement and Error will be stored in the Acknowledgement folder Messages of type System Advisory will be stored in the System Advisory folder Other messages will be stored in the Inbox folder of the iConnect Client All retrieved messages will have a status of RECEIVED No configuration is needed for this task How to set up a Task Group A Task Group is a list of tasks that were joined together to perform a single sequenced action The first few items u
36. SCII only p Lower A lower case alphabetic character a z p lt Upper An upper case alphabetic character A Z p ASCII All ASCITI x00 x7F SCN iConnect Client v3 1 Installation Manual 103 of 105 p Alpha An alphabetic character p Lower p Upper p Digit A decimal digit 0 9 p AlInum An alphanumeric character p Alpha p Digit p Punct Punctuation One of amp 4 lt gt _ p Graph A visible character p Alnum p Punct p Print J printable character p Graph p Blank A space or a tab t p Cntri M control character x00 x1F x7F p XDigit A hexadecimal digit 0 9a fA F p Space fA whitespace character t n x0B f r S _ Classes for Unicode blocks and categories p InGreek A character in the Greek block simple block p Lu An uppercase letter simple category p Sc A currency symbol P InGreek Any character except one in the Greek block negation p L amp amp p Lu Any letter except an uppercase letter subtraction Boundary matchers A fite beginning of a line The end of a line ab i fawodbonday o o eee SS B O MM non word boundary a fite beginning of the input G fite end of the previous match Z ite end of the input but for the final terminator if any z fite end of the input O y y l Greedy quantifiers Lx once or not at all w K zero or more times w i si one or more times X
37. SCN iConnect Client System version 3 1 User Manual for Windows Installation Aug 07 2006 SCN iConnect Client v3 1 Installation Manual 1 of 105 TABLE OF CONTENT L HOW TO INSTALL THE ICONNEC TE CLIENT poiesis os oa oN o i 4 A WHAT ARE THE SYSTEM REQUIREMENTS OF THE ICONNECT CLIENT ssssssssessesssrseessesserserssessessersersereseesserserserst 4 B HOWTOINSTALLGTHEICONNECT CLIENT anrniniioeai inen a E E TE E O EE S 4 C WHAT NEEDS TO BE SEF UP IN THE ICONNECT CLIENT sezseten aesdebae ards eee ENE EEE NEE EE EAS 8 Il WHAT IS THE ICONNECT CLIENT INTERFACE iisesssscssssscevesccdeassectucaseecaseasesccecevescedeesiecssaatesenecseseass 11 As FOLDER TANEC earners des eo dhs atte ts N aman tiisg nies ceed Dt N A 11 lo TOW TO CV CALC MCW FOLD o ene a T O O E T aie a a ls iat Nie tana ll 2 Howto editan ersin Folder aio teh sot asta E E EE E ahaa E E O 13 3 How todeleteanexistine POLAT iia ote a 529 at eal ie 3 ain cated E EEE E E A a Aae 14 Bo MESSAGE TABLE ANE Cintero inen n baby csenandesaieuniauscveasin E TA 14 lo HOwWTOTE eA MESAI C i Si Pa tes hs EE Ste Mec ea lat See Vict ETE e 3 Zi HOWO LIPO GO INC SSAC tat dal NE EEE E E N a EE 19 Se HOWO OPNAMES AOE araea N nE 23 d HOWTO NOV CLIN CSS IOC an E N aN act bedard th veie ci tulad dataset totale 24 Dec HOO Ae e a MCSSOCE a edst ted altel le ihe E A 24 Ge HA OW TO FINO IN CSS OO haha eo tea a Re Od hea acer a tale oe data sei ae ota hatin th tae 23 REALTIME LOGOER PAN
38. alog will open Enter a password that will be used to lock the settings The password must be at least six characters Change Password X Retype Password cmoa SCN iConnect Client v3 1 Installation Manual 86 of 105 d Confirm the password that was entered Change Password X mld Password z E e Click the OK button to save the password Change Password X ld Password x n New Password k pee Retype Password Cancel 2 How to unlock the settings of the 1Connect Client a To unlock the settings click Action Unlock Settings on the menu bar Action Tools Settings View Help Send And Receive Receive ds Import Message Find Message Unlock Settings O System Advisory O Trash c Click the OK button to unlock the settings Change Password X Old Password d pee Hew Password x n Retype Password j ant m SCN iConnect Client v3 1 Installation Manual 87 of 105 3 Howto set the iConnect Client to start minimized The iConnect Client has the option to minimize itself after it has finished initializing This reduces clutter on the user s desktop Enabling this and the Minimize To System Tray options will cut down the memory usage of the application a Mark the Minimized When IConnect Starts checkbox on the sConnect Preference dialog IConnect Preferences X
39. an be transformed from flat files like Comma Separated Value CSV to XML to formatted text XML Documents are additional components for the iConnect Client Refer to How to update the Connect Client on section V for more details on installing new components 1 Howto set up Import XML Mapper Data in CSV files are transformed into XML by matching the column numbers in the CSV to an XML Element or Attribute Default mapping configurations for the document types are already specified and may be changed if the user needs to a Click Settings Import XML Mapper on the menu bar to open the Import XML Mapper dialog a SCN iConnect Client Olivers Super Store Action Tools Settings View Help AER Import XML Mapper ir A S Folder Export XML Templates Message Id O 4c Connection Inl Server 1 Identity iConnect Preferences O System Advisory O Trash SCN iConnect Client v3 1 Installation Manual 71 of 105 b Select the Document Type to configure from the list on the left side of the dialog Import XML Mapper Settings ADINVC ver 1 0 ORDERS ver 1 0 RETANN ver 1 0 Elemert o tun A 8 orders buyer gln orders cancellfNotD eliveredBy date orders cancellfNotDeliveredBy time orders creationD ate orders deliveryD ate from date orders deliveryD ate from time orders deliveryD ate to date orders deliveryD ate to time orders deliveryLocation gln orders documentld orders lanquage orders notes or
40. anel The Realtime Logger panel contains details and time of the events that are happening in the iConnect Client A more comprehensive description of the events can be seen in the Log Viewer Refer to How to keep track of the activities of the iConnect in section VI for more details about the logs and their content E Realtime Logger l z9 11 46 24 IMF C Program Files iConnect Client v3 sourcerreport lz 4 O1 35 11 46 24 IMFO Tmported 2 message l DLl 29 08729 42 INFO Hoving messages from to Folder Inbox O1 29 08 29 44 INFO Hessage mored to Inbox l messages moved a IV How to set up the iConnect Client A How to set up the Identity The iConnect Client uses a global location number or GLN to uniquely identity an entity GLN can be obtained from GS1 Philippines formerly known as Philippine Article Numbering Council or PANC The iConnect Client also uses a public key infrastructure to secure the content of the messages through encryption The keys are registered to the user s GLN to make sure that only the owner of the GLN can use these keys All of this information is stored in a Keystore file The identity settings can be configured from the Identity Entry dialog This can be accessed by clicking Settings Identity from the menu bar iConnect Client Test Client Tools Settings View Help Tasks lers 52 Import XML Mapper Export XML Mapper Export XML Templates n 2 a Identi
41. arket ORDERS v1 0 stylesheet PLUGIN AVAILABLE C Execute Task PLUGIN Grocent ORDERS v1 0 stylesheet PLUGIN AVAILABLE X C GrocentPO v1 0 stylesheet PLUGIN AVAILABLE C Grocent RETANN v1 0 stylesheet PLUGIN AVAILABLE C Inventory Report INVRPT v1 0 PLUGIN AVAILABLE C Product Data PRODAT v1 0 PLUGIN AVAILABLE C Purchase Order PO 1 0 PLUGIN AVAILABLE Update Description Date Released 3 Aug 2006 11 04 AM task plugin that runs an external application Vindows executable EXE Windows batch file BAT or Linux shell script SH installed in the user s computer This plugin requires Core component v1 0 or higher and Client v1 0 or higher in the iConnect Client System 3 Select the patches that will be downloaded by marking the checkbox of the patch Select Updates to Download x Sakeh rororo aE Priory __Status O DI PO v1 0 stylesheet PLUGIN AVAILABLE C Despatch Advice DESADY v1 0 PLUGIN AVAILABLE C ver Department Store ORDERS v1 0 stylesheet PLUGIN AVAILABLE C ver Supermarket ORDERS v1 0 stylesheet PLUGIN AVAILABLE xecute Task PLUGIN AVAILABLE C Grocent ORDERS v1 0 stylesheet PLUGIN AVAILABLE C Grocent PO v1 0 stylesheet PLUGIN AVAILABLE C rocent RETANN v1 0 stylesheet PLUGIN AVAILABLE O ventory Report INVRPT v1 0 PLUGIN AVAILABLE C Product Data PRODAT v1 0 PLUGIN AVAILABLE Mpdate Description Status AVAILABLE Date Released 3 Aug 2006 11 04 AM Send out y
42. ce report0 23 tt es iConnect Client y3 source reportO 24 txt 4 gt Recipient s Creators Manufacturing S Loox Cancel The example above will produce this result D Outbox 2 9 Inbox Sender Documentid Recipient Document Type _ KA Test Client Creators Manufa REPORT PREPARED KA Test Client Creators Manufa REPORT PREPARED Import Message REPORT X i Import Message REPORT ay 2 File completed 1 Document completed SCN iConnect Client v3 1 Installation Manual 18 of 105 2 How to export a message a Select the messages that will be exported from the Message Table panel Right click on them then select Export Message from the popup menu D Outbox O Inbox 22 _ Messageld __ Sender__ Recipient__ Document Type Timestamp gal 2006 08 02T0 e E REPORT Export Message Delete Message Delete Open Message Enter Select All Ctrl A Properties b The Export Message dialog will open Select the type of file where the content of the messages will be exported to These types are as follows CSV FILE export content of the XML document message as a comma separated value file XML FILE export content of the XML document message as an extensible markup language file HTML FILE export content of the XML document message using a stylesheet FILE export the content of the message as is Export Message x PA er r b Destination Directo
43. containing files found in C import directory with a file name pattern of report case sensitive followed by three digits and file extension of txt case sensitive amp import fie Ci Vie Keer temo ee 2 J Back Ey if p Search gt Addes impt o H t Document feport023 tet Text D i OKB _ 1 objects 0 bytes The three digits in the file name will determine the recipient of the message The three digits will be matched to the lists of company codes defined in the Contact List The same message will also be created for Creators Manufacturing D Outbox x O Inbox Sender Recipient Document Type Status Filename 4 Olivers Super Store Warehousing Com REPORT PREPARED report023 txt amp 4 Olivers SuperStore Creators Manufact REPORT PREPARED report023 txt party anc org ph part i 1 i i SCN iConnect Client v3 1 Installation Manual 53 of 105 All imported files will be moved to the directory C import xxx xxx is the three digits found in the file name of the imported file The file will be overwritten if the file name already exists G 023 15 x File Edit View Favorites Tools cdl ae Q Back J v iT gt Search Address C C import 023 E fe report023 txt Text Document J OKB H objects D bytes 3 My Computer 2 How to set up Task for Export Message
44. cweslndiceva shin absdania tala nbiecentdiaeatssbancaeiaceteseieeds 47 2 How to set up Task for Export Message ich iderie Rito utGdiead he aioe Gnesi oucenitnde 54 3 Howto set up Task for Move Message ccccccceeccecee cect eee e cece cece cece acca aaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaeeeaeeeaeaaas 59 4 How to setup Task jor Delete Messe o s iia iiss csutsbive ative wtitgbdeduadlvcite aletsh ve atletinele txtiabinduadiuttacateihinnintetadtbredens 62 De OW 10 SCLUD Task fOr Appy Update yrei sira aE E tech otal IND cur then duct See tata 64 6 sHOWTOSCUUD SONA MeSSOCe TOS ites teased ih aia tert hota sh data shed it ae tht a setulae te A Tadtea 66 Te sIOWTOSCLUD RECEIVE MESS ACE TASK aisit s lode ds itata lot Adar teltuahedut aie et ila data t et Tate 66 EB HOWTO SET UPA CASK GROUP ouisersqisutt arsteliaunaqaubasantussunbaken aontsuainescatisiac used nus touneia E N 66 be HOWO COIS ane W Tk GOUD 3 tes a8 eset ih dette E E E a acl til ae tebsi ad Talala ne 67 2 Howtoedtanr es uno TASK GROUP Aiiicelrti hd banat eds there A dae tadata ote tied teeslet ih ae tena hee tadte 69 Se JOWTodelelean Lask GIOUD sona hea tif tal one ceed Be hen Ain Ta aha a ian Soa hah lala Scien Sle ee ta 70 4 Howtoredrrange theorder Of LOSI Groups spisser E Ulestisa nee Bacunpeinccena met iates 71 Fe HOWTOSETUPANAMEDOCUMEN T orenonadto one oe A A E O Gheeteahd ut 71 i Howloselupdmport AML Mapper coke ks e E mile tucks a aeeica matics his silee Chek a aaecicocntiuchieas ates
45. ddress of the new contact Website Enter the website of the new contact Contact Person Enter the contact person of the new contact 3 Click the Ok button to save the new contact Party ID i hittp www gst ph org party 4809551 477843 CompanyName 9 Companya O00 Company Code 0P023 003 Business Type Retailer O0 Address 55 Congressional Ave 000000 City Town Quezon Ciy Province Metro Mania O00000 Country Philippines O Telephone Number 3785445 nn ss sSSSSSSCSisSSCS Fax Number foresaag sS Mobile Number oss9785446 t lt swsSOSCSCSCiwsS Email Address companya yahoucom Website Jwwwcomparyacomph S S Contact Person Mark Chual Cancel 4 Click the OK button to save the update the contact list Party ID CompanyName CompanyCode Add http www gs1ph org party Creators Manufacturing http www panc org ph part Warehousing Company inc Eni http www gs1ph org party STGD Group http www gs1 ph org party Company A OPO23 003 Cancel SCN iConnect Client v3 1 Installation Manual 46 of 105 D How to set up a Task A task is an action that is preconfigured to create a more specific type of action A task can be an Apply Updates Task Delete Message Task Export Message Task Import Message Task Move Message Task Receive Message Task or a Send Message Task Other kinds of tasks may be available dependi
46. der Messageld Sender Recipient Document Type Status Acknowledgment O Inbox D SCN iConnect Client v3 1 Installation Manual 14 of 105 Message Table panels can be closed by clicking on the x on the right side of the tab The details of the message can be seen on the Message Table panel depending on what columns are selected to be displayed for a particular folder Refer to How to edit an existing Folder in section III A 2 for details on how to change the columns to be displayed for a folder The content of each columns are as follows Read a flag that indicates whether the message has been opened or exported Message Id an iConnect server generated ID to uniquely identify a particular message Document Id an internal ID of an XML document message generated by the user s system to uniquely identify the content of the message Sender the message correspondent Recipient the receiver of the message Document Type the type of message Reference Message Id the message ID of the message it is related to Timestamp the time the message was sent to the server Status the condition of the message which can be as follows PENDING newly created message that is ready to be sent SENT message that has been delivered to the iConnect server DELIVERED message that is ready to be picked up by the recipient RECEIVED message that is retrieved from the iConnect Server EXPORTED retrieved message where i
47. ders ORDERS v1 0 PLUGIN APPLIED C Return Announcement RETANN v1 0 PLUGIN APPLIED Update Description Reinstall Close Click Help About on the menu bar of the iConnect Client to view the components and their versions installed ettings View Help Download Updates Install Updates iowledgment i older Ox m Advisory 1 This dialog will open About iConnect Java Version Adinyc Xml Message Document Type 1 0 Connection Gui Component 1 0 0 Contact Gui Component 1 0 0 Core Component 3 1 1 Delete Message Task Component 1 0 0 Dialer Component 1 0 0 Export Message Task Component 1 0 0 Identity Gui Component 1 0 0 Import Message Task Component 1 0 0 Logger Component 1 0 0 Logger Gui Component 1 0 0 c Supply Chain Networks Inc Message Store Component 1 0 0 All Rights Reserved Message Store Gii 1 8 xi VI How to keep track of the activities of the iConnect A What do the logs mean All activities within the iConnect Client application are logged to monitor the actions being done This information can be very useful for tracking past actions and debugging erroneous processes Logs are written in this format mm dd HH MM ss LOG_LEVEL message SCN iConnect Client v3 1 Installation Manual 95 of 105 Example 03 30 13 18 51 INFO Exported 1 message s This means that on March 30 13 hours or 1pm 18 minutes 51 seconds an INFO log has been recorded with
48. ders number orders reference orders seller gln orders status orders type orders lineltems cancellfNotDeliveredBy date orders lineltems cancellfNotDeliveredBy time orders lineltems description orders lineltems itemld gtin orders lineltems lineltemNumber orders lineltems netPrice currency orders lineltems netPrice monetaryAmount orders lineltems netPrice number orders lineltems netPrice reference orders lineltems notes Cancel _ c Specify the column number where the XML Element or Attribute is located in the CSV file Set the column number to 0 for optional elements and attributes that will not be used so that these data will not be included in the generated XML message Import XML Mapper Settings ADINVC ver 1 0 ORDERS ver 1 0 RETANN ver 1 0 Elemet 0 Coot f g I orders buyer gln orders cancellfNotDeliveredBy date orders cancellfNotDeliveredBy time orders creationD ate orders deliveryD ate from date orders deliveryD ate from time orders deliveryD ate to date orders deliveryD ate to time orders deliveryLocation gln orders documentld orders lanquage orders notes orders number orders reference orders seller gln orders status orders type orders lineltems cancellfNotDeliveredBy date orders lineltems cancellfNotDeliveredBy time orders lineltems description orders lineltems itemld gtin orders lineltems lineltemN umber orders lineltems netPrice currency orders lineltems netPrice monetarAmount orde
49. details and examples on filename patterns Leave it blank to save the content of the message in the selected directory Directory X Directoy C expoted O m Oo Cancel SCN iConnect Client v3 1 Installation Manual 20 of 105 g Continue to add more directories if the content of the messages needs to be extracted into multiple directories The sequence of the directories will be the same sequence that will be used when exporting the content of the messages Click the Move Up or Move Down to move the selected directories up or down the list respectively Directory List iy a C Documents and Settings Administrator Desktop h Click Ok to confirm the list of directories that will be used to export the content of the messages Directory List Directoy sd Pattie C exported i Overwrite the file if it exists by marking the Overwrite Existing File checkbox When not selected OLD x where x is a sequence number will be appended to the filename of the older file Export Message z C exported el j Click Okto proceed with the exporting Export Message Pe SCN iConnect Client v3 1 Installation Manual 21 of 105 The example above will export the selected message as FILE in the directory C exported fi exported File Edit View Favorites Tools Hel
50. e exported into CSV files by matching the XML Element or Attributes to a column numbers in the CSV Default mapping configurations for all document types are already provided and may be changed if the user needs to a Click Settings Export XML Mapper on the menu bar to open the Export XML Mapper dialog SCN iConnect Client Olivers Super Store Action Tools Settings View Help Tasks ake D Folders Export XML Mapper pP app hs Connection Inl Server Identity iConnect Preferences O System Advisory O Trash SCN iConnect Client v3 1 Installation Manual 73 of 105 b Select the Document Type to configure from the list on the left side of the dialog Export XML Mapper Settings ADINVC ver 1 0 ORDERS ver 1 0 RETANN ver 1 0 orders buyer gln orders cancellfNotD eliveredBy date orders cancellfNotDeliveredBy time orders creationD ate orders deliveryD ate from date orders deliveryD ate from time orders deliveryD ate to date orders deliveryD ate to time orders deliveryLocation gln orders documentld orders lanquage orders notes orders number orders reference orders seller gln orders status orders type orders lineltems cancellfNotDeliveredBy date orders lineltems cancellfNotDeliveredBy time orders lineltems description orders lineltems itemld gtin orders lineltems lineltemNumber orders lineltems netPrice currency orders lineltems netPrice monetaryAmount orders linel
51. ect Client on your computer SCN iConnect Client v3 1 Installation Manual 7 of 105 9 To start the iConnect Client after the installation has completed mark the Launch Connect Client checkbox Click the Finish button to close the setup window Setup SCN iConnect Client gt 5 xf Completing the SCN iConnect Client Setup Wizard Setup has finished installing SCN iConnect Client on your computer The application may be launched by selecting the installed icons Click Finish to exit Setup I Launch iConnect Client C What needs to be set up in the Connect Client There are a few other things that need to be set up in the iConnect Client to run the application properly and according to the user s requirements 1 Identity The iConnect Client needs to be uniquely identified in the server to create send and receive messages Refer to How to set up the Identity in section IV A for more details Additional Components Some users may need additional components that are not included in the iConnect Client installer These components can be a task an XML document a stylesheet for an XML document a preconfigured setup or an update Refer to How to update the iConnect Client in section V for more details Connection Dial up accounts and proxy server settings may be needed to be configured in the iConnect Client Refer to How to set up the Connection in section IV B for more details Contac
52. ect Client v3 1 Installation Manual 102 of 105 Characters x she character x Ws The backslash character on Tite character with octal value 07 0 lt n lt 7 Onn Tte character with octal value 077 0 lt n lt 7 Omm Tte character with octal value 0Omnn 0 lt m lt 3 0 lt n lt 7 xhh Tre character with hexadecimal value 0x uhhhh Tte character with hexadecimal value Ox Ahh t The tab character u0009 n she newline line feed character u000A r she carriage return character u000D f she form feed character u000C a Thealert bell character u0007 e Tte escape character u001B cx Tte control character corresponding to x Character classes abc fa b or c simple class abc Any character except a b or c negation a zA Z h through z or A through Z inclusive range a d m p le through d or m through p a dm p union a z amp amp def a e or f intersection a z amp amp bc a through z except for b and c ad z subtraction a z amp amp m p l through z and not m through p a lq z subtraction O Predefined character classes O w character may or may not match line terminators ad fAdigt po 9 D A non digit p o 9 s AA whitespace character t n x0B f r SS gt A non whitespace character s a f word character a zA Z_0 9 w A non word character w S POSIX character classes US A
53. ent uses patch files to update the application Patch files have patch as their extension These files are also used to install new components or upgrades for the iConnect Client application Regularly check the list of available patches to ensure that the iConnect Client is always up to date A How to create an Update File There are some components created for the iConnect Client that can create patch files Call the SCN Technical Support or browse through the available updates that can be downloaded from the server How to download an update from the server All available components and upgrades can be downloaded from the iConnect server An internet connection is required to connect to the server The identity of the iConnect Client must also be configured to download updates 1 Click Help Download Updates from the menu bar of the iConnect Client Client Olivers Super Store ttings Vie Download Updates cj Lic aN View Installed Updates About wledgment Ider K n Advisory 2 A window will open containing the list of patches that is available for downloading Click on a patch to view a description of the update SCN iConnect Client v3 1 Installation Manual 89 of 105 Select Updates to Download Sel Name Priority Status C Despatch Advice DESADY v1 0 PLUGIN AVAILABLE C Ever Department Store ORDERS v1 0 stylesheet PLUGIN AVAILABLE C Ever Superm
54. ers Super Store Action Tools Settings View Help Tasks Import XML Mapper im Folders 53 Export XML Templates Server Identity iConnect Preferences O System Advisory O Trash SCN iConnect Client v3 1 Installation Manual 77 of 105 b This is the Export XML Template Settings dialog All installed XML documents are listed on the left side of the dialog Exporter XML Template Settings ADINVC ver 1 0 CSV ADINYC ver 1 0 HTML ADINVC ver 1 0 KML ORDERS ver 1 0 CSV ORDERS ver 1 0 HTML ORDERS ver 1 0 ML RETANN ver 1 0 CSV RETANN ver 1 0 HTML RETANN ver 1 0 ML Cancel _ c The template uses the following data model names to generate the CSV file data the name of the object that contains the content of the CSV file d Select the document type with the file type of CSV that will be edited from the list on the left side of the Export XML Template Settings dialog Exporter XML Template Settings X ADINVC ver 1 0 CSV ADINVC ver 1 0 HTML File Name ADINVC ver 1 0 ML 1 sendet sender last_index_of sender lenath 1 lt if mes ORDERS ver 1 0 HTML ORDERS ver 1 0 KML RETANN ver 1 0 CSV RETANN ver 1 0 HTML Revert To Default Test Templates RETANN ver 1 0 KML Revert To Default Test Templates cancel _ e After editing the template click the Test Templates button for the CSV Format field to check the template Exporter XML Temp
55. ertificate Ls Ok Cancel e To register the keys to the server submit the file containing the public key and the information of the newly generated key pair to iConnect Technical support Then a SCN iConnect Client v3 1 Installation Manual 30 of 105 public key certificate will be sent back after the public key has been registered Save it into the computer In the Identity Entry dialog click the Generate new Keystore button This will open the Identity Details dialog Click the Import Certificate button Identity Details X Party tdi gt Pipan asip ora party 4805305730269 Bompeny Name a Olivers Super Stre Wawe WhBuSsiness RETAILER Supermarket y AGEs 156 Congressional Ave Quezon City State i Mero Mania i ti s SC C S Bounty a P Generate New Key Pair Export Public Key Import Certificate Ok Cancel A file dialog will open Locate and select the public key certificate that was sent by the iConnect Technical Support This file has a cer file extension Click the Open button to import the selected public key certificate file Import certificate Riks Look in a keys e ex Ese go History a Desktop My Documents My Computer ao File name oiivers key cer NM My Network P Files of type cer ha Identity Details X Party 1 gt RAAN asip org party 4805305730263 Company Wane Olivers Super Store Nature whBu
56. exercise a lot more discretion on policing the traffic including the drop of connection at the appropriate time a proxy server always assumes HTTP connections are non persistent On the other hand the proxy server is able to decipher HTTPS connections because of encryption so it has no choice but to relay the data intact and cannot drop the connection unless the client and or the server desires to Another secret of HTTPS proxy connection is that the actual client server communication does not encrypt or involve SSL even though this type of connection is often called SSL Tunneling Again this is because the proxy server assumes that the subsequent communication is not readable TConnect Client uses SSL for sending and receiving confidential messages SSL does not support proxies in the way that clear text HTTP does in terms of protocol design since an SSL connection is end to end Only the original server on the remote end can do the necessary decryption and encryption for communication Contrast with plain HTTP which is easily handled by a server such as Squid or MS Proxy Server because it takes requests as a server and makes them as a client One possible approach to allow the iConnect Client System to connect to an HTTPS web server through a proxy server is to set per IP basis security policies Network Administrators do this by relaxing the security policies for accessing the iConnect web server at https www iconnect com ph and https ww
57. following specifications Pentium ITI 800MHz or a higher or equivalent CPU with least 256 MB RAM Any Windows Operating System that supports Java Runtime Environment JRE version 1 5 or higher Some examples of these are Windows 95 98 ME Windows NT 4 0 service pack 5 Windows 2000 Windows XP Minimum screen resolution is 600 x 800 Recommended screen resolution is 1024 x 768 for better viewing of the interface Minimum free hard drive space is about 200mb How to install the iConnect Client The iConnect Client v3 1 setup program is needed for the installation A copy of this program can be obtained from the iConnect download site at https www iconnect net ph downloads or can be requested by calling our technical support group This application requires Administrator rights to install the iConnect Client application 1 Double click the iConnect Client v3 1 setup program to begin the installation ee File Edit View Favorites Tools Help hl bi Q Back v P J search Folders K Address L Installer x iconnect setup 3 1 1 exe File and Folder Tasks te SCN area Clerk Setup Supply Chain Networks Inc Other Places N Details y f1 objects 23 2 MB g My Computer A SCN iConnect Client v3 1 Installation Manual 4 of 105 2 The setup window will open Click the Next button to continue 8 Setup SCN iConnect Client iol x Welcome to the SCN iConnect Client Set
58. for the search results At least one column should be selected Find Message x Find Message Filter Add Message Id like 2006 01 27 Sender equals Creators Manufacturing Timestamp after 01 01 2006 02 00 PM read messages only Message Id IV Sender M Document Type lV Timestamp T Filename Edit T Document Id IT Recipient Reference Message Id l Status IV Folder Cancel e Click OK to begin the search Find Message X Find Message Filter Message Id like 2006 01 27 Sender equals Creators Manufacturing Timestamp after 01 70172006 02 00 PM read messages only Columns M Messageld MV Sender M Document Type MV Timestamp T Filename dd __ Add Edit I Document Id I Recipient I Reference Message Id Status IV Folder Cancel The example above will search for messages with the following details Message Id must contain 2006 01 27 Sender must be Creators Manufacturing Timestamp must be after January 01 2006 02 00 PM Message must be marked read The messages that matched will be shown on a new Message Table panel im Outbox ID Inbox O Find 1 8N Bg 2006 01 27T03 12 SI Messageld Sender Document Type Timestamp Folder Creators Manufac REPORT 27 Jan 3 12 58 AM Folder Inbox SCN iConnect Client v3 1 Installation Manual 27 of 105 C Realtime Logger P
59. he message B 11 ADINVC iol x lt xml version 1 0 encoding ISO 8859 1 gt lt adinve status ORIGINAL reference BILLED documentId 00079697 creationDate 2006 05 01 gt lt buyer gt lt gin gt 4808831553438 lt gin gt lt buyer gt lt advertiser gt lt gln gt 4808453471138 lt gin gt lt advertiser gt lt seller gt lt gln gt 4801110234698 lt gin gt lt seller gt lt adAgency gt lt gin gt 4807998865333 lt qln gt lt fadagency gt lt serviceOrderld gt T VO6 UR 58 lt serviceOrderld gt lt media gt T lt media gt Print IS On the other hand opening a non XML document message will open its content using the associated program that is set in the computer based on the file name of message Messages that are opened will be marked as read SCN iConnect Client v3 1 Installation Manual 23 of 105 4 Howto move a message a Select the message that will be moved Right click on them and then click Move Message from the popup menu zak 2006 08 0270 Move Message Open Message Enter Select All Ctrl A Properties older My Folder older Uutbox Folder Sent a Folder System Advisory Folder Trash bi c Click OK to proceed with the moving of the selected messages Move Message X Target Folder PE The example above will move the selected message to Folder My Folder Outbox L Inbox L My Folder ooo eee a M4 2006 08 02T07 27 Creat
60. ifference field This is the difference between the time this task was executed as against the timestamp of the message Delete Message Task X Folder z Folder My Folder 7 Units j Months E Timestamp Difference 1 K T Delete Unread Messages x cmos f Select the Delete Unread Messages checkbox if messages that have been marked as UNREAD will also be removed Delete Message Task x Folder g Folder M y Folder 7 Units Months z Timestamp Difference fil a Ree Unread Messages cancel _ SCN iConnect Client v3 1 Installation Manual 63 of 105 g Click the Ok button to save the details for the new Delete Message Task Delete Message Task X Folder Folder My Folder Units Months X Timestamp Difference fi T Delete Unread Messages h The new Delete Message Task will be listed in the lists of tasks under Delete Message The details of the created task can be viewed and edited by selecting it Apply Updates Delete Message Falder ree Ty ee My Folder Export Message Units Months S ORDERS ver 1 0 E Import Message Timestamp Difference if REPORT Move Message T Delete Unread Messages Inbox Receive Message Send Message i This is what will happen when this Delete Message Task is executed The Delete Message My Folder will move all unread messages found in Folder My Folder that are at least
61. ion Dial up Entry x Entry Name Iintemet ISP Phone Number 4523333 User Name tgek2 1 yh isp Password eel Proxy URL a Proxy Pott Progy User Name OO Proxy Password Po Proxy Domain User Agent fiConnectClient 3 1 1 H cous Enter the following details of the proxy connection Proxy URL Enter the IP Address or the URL of the proxy server Proxy Port Enter the port of the proxy server Proxy User Name Enter the user name of the account that will be authenticated by the proxy server Proxy Password Enter the password of the account Proxy Domain Enter the domain of the proxy server User Agent Enter the name that will be used to identity the iConnect Client application to the proxy server SCN iConnect Client v3 1 Installation Manual 40 of 105 e Click the Ok button to save the details of the dial up account Dial up Entry tgek21 ph isp E minas igile PIAJ eee AOA marssiyeyek IAA onrett User Agent iConnect Client 3 1 1 f The sequence of the created dial up accounts will be followed when connecting through a dial up connection The order may be changed by clicking the Move Up or Move Down buttons to move the order of the selected dial up account Connection EntyName Phone Number jIntemetISP 8523333 Internet ISP2 Mave Wav SCN iConnect Client v3 1 Installation Manual 41 of 105 g The val
62. ist Select files to import i ES Look in a source e ex E orders223 xml orders225 xml File name My Network P SCN iConnect Client v3 1 Installation Manual 16 of 105 Click Open to confirm the selected files Select files to import 20 x Look in a source e e File name J reportOt 24 txt report01 23 txt z Leen Files of type xx 7 ancer y My Network eS Set the recipients for the new message Click the button to open the list of recipients Select Al Remove Al Add O Creators Manufacturing CO Warehousing Company inc Select the recipients for the new message New contacts can be added by clicking on the Add button Refer to How to set up the Contact List in section IV C for details on how to add new contact details Select All Remove All O Creators Manufacturing CO Warehousing Company inc SCN iConnect Client v3 1 Installation Manual 17 of 105 Click Ok to confirm the selected recipients Select recipient s X Select All Remove All Add Creators Manufacturing O Warehousing Company inc Cancel Take note that an XML document message already has a defined recipient in its content Having more than one recipient will create copies of the message for each of the recipients g Click OK to create the new message Import Message X Document Type REPORT 7 File s Jes iConnect Client v3 sour
63. l be used for the identity Company Name Enter the name of the organization who owns the GLN SCN iConnect Client v3 1 Installation Manual 29 of 105 Nature of Business Choose from the drop down list to classify the type of organization Address Enter the full address of the organization State Enter the state where the organization is located Country Enter the two letter code for the country the organization is located c Click Okto generate the new key pair using the provided information Party Id http w gs ph ora party 4805305730269 CompanyName Olivers SuperStore Nature Of Business RETAILER Supermarket O H Address 2 56 Congressional Ave Quezon Ciy 202 State 7 Metro Maria O00 Country p PHO Import Certificate d When the file dialog opens select the location and filename to save the public key and the information of the newly generated key pair This file will have a zip file extension Click the Save button to save the file with the chosen location and filename Save public key as Save in a keys ex Ese File name My Network P C p p ance Save as type 2 This file can be repeatedly exported by clicking on the Export Public Key button in the Identity Details dialog Identity Details X Party ld iompeny Name Nature GF Business Addre s Crate fount Generate New Key Pair Export Public Key Import C
64. late Settings X ADINYC ver 1 0 CSV ADINVC ver 1 0 HTML File Name ADINVC ver 1 0 XML 1 sender sender last_index_off sender length 1 lt if mes DERS ver 1 0 CSV ORDERS ver 1 0 HTML ORDERS ver 1 0 ML RETANN ver 1 0 CSV RETANN ver 1 0 HTML Revert To Default Test Templates RETANN ver 1 0 ML CSV Format lt tlist data as row gt lt tlist row as item gt lt tif item_index O gt lt H 4 gt he coca _ All tests use the following sample values for each of the data model data a list of list of items for each column SCN iConnect Client v3 1 Installation Manual 78 of 105 If unsure of the template change the template back to its default value by clicking the Revert to Default button for the CSV Format field Exporter XML Template Settings X ADINYC ver 1 0 CSV ADINYC ver 1 0 HTML File Name ADINVC ver 1 0 XML 1 sender sender last_index_off sender length 1 lt if mes ORDERS ver 1 0 HTML ORDERS ver 1 0 XML of RETANN ver 1 0 CS RETANN ver 1 0 HTML Revert To Default Test Templates RETANN ver 1 0 XML CSW Format felist data as row gt lt Hlist row as item gt lt Hif item_index O gt lt H Revert To Default N Test Templates cancel The default CSV template for the document type ORDERS version 1 0 will generate a file with this content row1 data1 row1 data2 row1 data3 row1 data4 row2 datal1 row2 data2 row2
65. ll not affect the copy that the iConnect Client has made Any changes that the iConnect Client made to its copy of the Keystore will also not affect the imported Keystore file SCN iConnect Client v3 1 Installation Manual 32 of 105 a On the Identity Entry dialog click the Zmport button for the Keystore field Identity Entry b A file dialog will open Locate and select the Keystore file that will be imported A Keystore file has a ks file extension Click the Open button to import the selected Keystore file Select key store file OIYVEIS KEY KS ey ory k kt oN istor eskto My Computer yao Re My Network P Ooo fe Se ZA C Identity Entry EW asswarar ReWpe kasswod i SCN iConnect Client v3 1 Installation Manual 33 of 105 e Click the OK button to continue Change Password X Dld Password pee Hew Password Ee o F Retype Password Cancel f The importing of the Keystore file is successful if the Party Id and Company Name fields of the Identity Entry dialog have changed into the information that is contained in the imported Keystore file Identity Entry X Party ID http Zann gs1ph org party 4805305730269 Company Name Olivers Super Store Key Store Import Export View Password peoo Change Generate New Keystore I Ask For Password When IConnect Starts Cancel
66. mponent 0 1 MB O Inventory Report ver 1 0 XML Document Type Component O Orders ver 1 0 XML Document Type Component 0 1 MB C Orders ver 1 0 Stylesheets F Abenson Orders ver 1 0 Stulesheet 0 1 MB xi Current selection requires at least 175 1 MB of disk space lt Back 5 Select the folder on where to install iConnect Client shortcuts in the Start Menu Click the Next button to continue i Setup SCN iConnect Client E x Select Start Menu Folder b Where should Setup place the program s shortcuts i Setup will create the program s shortcuts in the following Start Menu folder To continue click Next If you would like to select a different folder click Browse iConnect Client v3 1 Browse SCN iConnect Client v3 1 Installation Manual 6 of 105 6 Select other locations to install additional iConnect Client shortcuts PE Setup SCN iConnect Client fel ES Select Additional Tasks Which additional tasks should be performed 7 Review the installation configuration that was chosen To change the configurations click the Back button To continue with the installation click the Znmsta button saa Setup SCN iConnect Client Ready to Install Setup is now ready to begin installing SCN iConnect Client on your computer 8 Wait until the installation has been completed gE Setup SCN iConnect Client Installing Please wait while Setup installs SCN iConn
67. n X exactly ntimes xm at least 7 times Mnmy K at least 7 but not more than n times fe Reluctant quantifiers xX X once or not at all SCN iConnect Client v3 1 Installation Manual 104 of 105 xr YK zero or more times x K one or more times Xn X exactly ntimes Anoz K at least 7 times Mnamy K at least 7 but not more than n times a Possessive quantifiers x K once or not at all xe YK zero or more times i K one or more times XAn X exactly ntimes ane K at least n times Mnamy K at least 7 but not more than n times Cd Logical operators xy X followed by Y xy Either Xor Ooi asa capturing group Back references n Whatever the 7 capturing group matched Quotation Nothing but quotes the following character Nothing but quotes all characters until E Nothing but ends quoting started by Q Special constructs non capturing xy sx as a non capturing group idmsux idmsux __ Nothing but turns match flags on off idmsux idmsux X _ X as a non capturing group with the given flags on off x K via zero width positive lookahead ew K via zero width negative lookahead lt kK via zero width positive lookbehind e lt x via zero width negative lookbehind ey o K as an independent non capturing group SCN iConnect Client v3 1 Installation Manual 105 of 105
68. nder the Action menu are the created Task Groups It can be executed manually by selecting the task group from the menu bar Action name of Task Group It can also be automatically executed by assigning a schedule to the Task Group Refer to How to set up the Scheduler in section IV G for more details Click Tools Task Groups to open the Task Groups dialog a s lt SCN iConnect Client Actio gt Fok This is the Task Group dialog i i Log Viewer Scheduler T Schoen D Inbox O My Folder A gt Nuthne Task Group x Receive Send SCN iConnect Client v3 1 Installation Manual 66 of 105 1 Howto create a new Task Group a Click the Add button in the Task Group dialog Task Group b A Create Task Group dialog will open Create Task Group x n B o d o a c Enter a name for the new Task Group on the Group Name field Create Task Group Send nd Receive a Py E Create Task Group end nd Receive SCN iConnect Client v3 1 Installation Manual 67 of 105 e On the Select Task dialog mark the tasks that will be included in the new Task Group Click Ok to add the selected task to the list Select tasks X Select All Remove All C Apply Updates ICONNECT_SETTINGS Delete Message My Folder Export Message ORDERS ver 1 0 Import Message REPORT C Move Message
69. ng on the components that are installed in the iConnect Client Tasks can be executed by adding it into a Task Group Refer to How to set up a Task Group in section IV E for more details Click Settings Task from the menu bar to open the Task dialog D Folder Export XML Templates Export XML Mapper Ac Connection Inf Server Identity iConnect Preferences This is the 7ask dialog All available tasks are listed on the left side of the dialog Apply Updates Delete Message Export Message Import Message Move Message Receive Message Send Message apply update task cancel _ 1 How to set up Task for Import Message Import Message Task is a task that creates messages from the files that it will import using the parameters that were set for the task a Right click on Zmport Message from the Task dialog and select Add New Import Task from the popup menu Send Message Apply Updates SCN iConnect Client v3 1 Installation Manual 47 of 105 b An Import Message Task dialog will open Import Message Task c Enter the type of message to be created in the Document Type field Installed XML document types can be selected from the list by clicking the button Import Message Task d Enter the pattern of the file name that will be accepted for this type of message on the File Name Pattern field Refer to File
70. nt Olivers Super Store Action Tools Settings View Help Send And Receive Receive Send Import Message Stop Scheduler O System Advisory Trash The iConnect Client icon on the system tray will change to show that the scheduler is not running Saas Eg 2 7 36 PM H How to use the iConnect Preference Click Settings iConnect Preference from the menu bar to open the Connect Preference dialog i SCN iConnect Client Olivers Super Store Action Tools Settings View Help Folders 53 Tasks Import XML Mapper Export XML Mapper Export XML Templates Connection Server SCN iConnect Client v3 1 Installation Manual 85 of 105 This is the Connect Preference dialog Lock Current Settings I Minimize When IConnect Start IT Minimize To System Tray Carcel _ 1 How to lock the settings of the iConnect Client The iConnect Client has the option to disable the editing of its settings for security reasons To do this a Click the Lock Current Settings button in the Connect Preference dialog IConnect Preferences X Lock Current Settings X I Minimize When IConnect Start I Minimize To System Tray Carcel b Click the Ok button to save the changes made IConnect Preferences X Lock Current Settings I Minimize When IConnect Start J Minimize To System Tray Cancel c A password di
71. onthly Day Of The Month E E Ej E This can be any of the following Weekly The Task Group will be executed on the selected the days of the week This example will execute the Task Group from Mondays to Fridays SCN iConnect Client v3 1 Installation Manual 82 of 105 Monthly Day of the Week The Task Group will be executed on the selected day of the week within the selected week of the month Monthly Day OF The Week The First 7 Monday of the month A This example will execute the Task Group every first Mondays of the month Monthly Day of the Month The Task Group will be executed on the selected date Monthly Day Of The Month This example will execute the Task Group on the first day of the month g Click Okto create the new schedule using the specified parameters Scheduler Entry Task Group Send And Receive Z Start Time 09 00 AM End Time z 07 00 PM Interval minutes 015 Weekly Days Sunday IV Monday M Tuesday MV Wednesday M Thursday I Friday T Saturday Ok Cancel X SCN iConnect Client v3 1 Installation Manual 83 of 105 h The new schedule will be listed showing the Task Group and the date and time it is scheduled to run Scheduler X Next Schedule R Send nd Receive Tue 04 Apr 9 00 4M I Automatically Start Scheduler When IConnect Sta
72. ools Scheduler from the menu bar at SCN iConnect Client Olivers Super Store Action Tools Settings View Help Task Groups im Outbox Message O Outbox OG Sent O System Advisory O Trash This is the Scheduler dialog Automatically Start Scheduler When Connect Starts Ok Cancel 1 How to schedule a Task Group a On the Scheduler dialog click the Add button to create a new schedule This will open a Scheduler Entry dialog Scheduler X Newt Schedule eT Automatically Start Scheduler When Connect Starts Ok Cancel SCN iConnect Client v3 1 Installation Manual 80 of 105 b Choose the Task Group for the new schedule Scheduler Entry Send And Receive am Receive Send erid srid CLeiVve c Specify the time the Task Group will begin its schedule Scheduler Entry Send And Receive 03 00AM N d Specify the time the Task Group will end its schedule Scheduler Entry Send And Receive v 03 00 AM 07 00 PM Z SCN iConnect Client v3 1 Installation Manual 81 of 105 G f Specify the intervals between executions of the Task Group in minutes Scheduler Entry X Send nd Receive v 03 00 AM 07 00 PM Choose the type of days to schedule the Task Group Scheduler Entry X Send nd Receive 03 00 AM 07 00 PM Z rc weekly N weekly Monthly Day Of The Week M
73. ors Manufact Olivers Super Store REPORT RECEIVED Move Message i sas eae 5 How to delete a message a Select the message that will be deleted Right click on them and then click Delete Message from the popup menu shian TIes 02 ug 2 03 5 EXPORTED Seat Message Message Delete Select All Properties SCN iConnect Client v3 1 Installation Manual 24 of 105 b Click Okto confirm the deletion of the selected messages 2 Are you sure you want to delete the selected message s Cancel Deleted messages will be moved to the Trash folder Deleting messages in the Trash folder will permanently delete the message 6 How to find a message a On the menu bar click Action Find Message SCN iConnect Client Action Tools Settings i Receive Find Message b The Find Message dialog will open Find Message Filter Columns J Message ld T Document Id T Sender Recipient I Document Type Reference Message Id Timestamp T Status l Filename Folder Ok Cancel c Messages can be searched based on the details of the message Refer to Message Table Panel in section III B for the list and definitions of details of a message Narrow down the search by defining filters for the details of the messages Select the detail and set values for the filter The filters can be any of the following SCN iConnect Client v3 1 Installation Manual 25 of 105 String match This filter
74. oups can be edited except for the Task Groups name a Select the Task Group to change and click the Edit button in the Task Group dialog Task Group x Send nd Receive Move Down Cancel SCN iConnect Client v3 1 Installation Manual 69 of 105 b The Create Task Group dialog will open Make the changes for the Task Group Create Task Group TGUPINEMe i c Click Okto update the Task Group Create Task Group moup tiame Import Message REPORT Send Message Receive Message Export Message ORDERS ver 1 0 3 How to delete an Task Group a On the 7ask Group dialog select the Task Groups that will be deleted and click the Remove button SCN iConnect Client v3 1 Installation Manual 70 of 105 4 Howto rearrange the order of Task Groups The sequence of the Task Groups on the list will be the same sequence they will appear under the Action menu on the menu bar Click the Move Up or Move Down buttons to move the selected tasks up or down the list respectively Task Group X Receive Send cence _ This example will have this result wI SCN iConnect Client Olivers S gs View Help Find Message Start Scheduler O System Advisory O Trash F How to set up an XML Document Extensible Markup Language XML Documents are files that are based on a template called a schema XML Documents c
75. our current iConnect Client System settings to another iConnect Client System user This plugin compiles your present settings and send them as a message of type ICONNECT_SETTINGS o a recipient Export the message as a zipped file containing all the configurations or have it automatically installed in your iConnect Client System thru the Apply Update Task This plugin requires the Core componenty1 0 or higher Client v1 0 or higher and Patcher v1 0 or higher installed in the iConnect Client System Select Updates to Download X L CDIPO v1 0 stylesheet PLUGIN AVAILABLE C Despatch Advice DESADY v1 0 PLUGIN AVAILABLE C Ever Department Store ORDERS v1 0 stylesheet PLUGIN AVAILABLE C Ever Supermarket ORDERS v1 0 stylesheet PLUGIN AVAILABLE Execute Task PLUGIN AVAILABLE C Grocent ORDERS v1 0 stylesheet PLUGIN AVAILABLE C Grocent PO v1 0 stylesheet PLUGIN AVAILABLE C Grocent RETANN v1 0 stylesheet PLUGIN AVAILABLE C Inventory Report INVRPT v1 0 PLUGIN AVAILABLE C Product Data PRODAT v1 0 PLUGIN AVAILABLE Update Description a TB ET Priority PLUGIN Status AVAILABLE Date Released 3 Aug 2006 11 04 AM Send out your current iConnect Client System settings to another iConnect Client System user This plugin compiles your present settings and send them as a message of type ICONNECT_SETTINGS o a recipient Export the message as a zipped file containing all the configurations or have it automatically installed in your
76. ove Message Task X Source Folder Folder Inbox X Target Folder i Folder My Folder Units z Days v Timestamp Difference Ns Move Unread Messages omes g Select the Move Unread Messages checkbox if messages that have been marked as UNREAD will also be moved Move Message Task X Source Folder Folder Inbox ha Target Folder Folder My Folder m Unit P o Timestamp Difference fi Iv ee Unread Messages Ok Cancel h Click the OK button to save the details for the new Move Message Task Move Message Task xl Source Folder Folder Inbox Target Folder Folder My Folder iad Units pa o Timestamp Difference fi IV Move Unread Messages SCN iConnect Client v3 1 Installation Manual 61 of 105 i The new Move Message Task will be listed in the lists of tasks under Move Message The details of the created task can be viewed and edited by selecting it Apply Updates Delete Message Source Folder Folder Inbox Export Message ORDERS ver 1 0 Target Folder Folder MyFolder Import Message REPORT Units j Das gt H E Move Message Abo Timestamp Difference hf Receive Madsage Send Message IV Move Unread Messages Cancel _ This is what will happen when this Move Message Task is executed The Move Message Inbox will move all messages found in Folder Inbox that are
77. p G Back O r T A Search gt Folders E Address D exported 7 report042 txt Text Document 1KB 11 objects 313 bytes My Computer A The status of the exported message will change to EXPORTED This only happens when the message had a status of RECEIVED before it was exported Exported messages will be marked as read regardless of its previous status _ Messageld___ Sender__ Recipient__ Document Type Timestamp Status__ Fy 2006 08 0270 Creators Manuf Olivers Super REPORT 02 Aug 2 03 5 EXPORTED Export Message i Export Message 1 Export to Directory completed 1 Message completed SCN iConnect Client v3 1 Installation Manual 22 of 105 3 How to open a message a Select the message that will be opened Right click on them and click Open Message from the popup menu ee ae RECEIVED 02 Aug 3 2 TAL 2006 08 0270 Creators Manuf Avers Super Export Message Move EEA Peba Opening an XML document message will open a new window transformed into its HTML form on the condition that a stylesheet for that XML document exists Orders 2 Creation Date 2002 07 01 Reference PRICE LIST NUMBER Status ORIGINAL Type SIMPLE Number 8246951753 Language EN Buyer GLN 4807999000976 Seller GLN 4807999000976 Delivery Location GLN 4808888023421 If none is found the new window will contain the XML content of t
78. r copies of the Keystore that was previously made a On the Identity Entry dialog click the Change button for the Password field Identity Entry X Party ID http www gs1ph org party 4805305730269 Company Name Olivers Super Store Key Store Import Export View Password em ETA S Generate New Keystore I Ask For Password When IConnect Starts Cancel SCN iConnect Client v3 1 Installation Manual 35 of 105 b The Change Password dialog will open Change Password X Old Password s New Password g Retype Password c On the Old Password field enter the password of the existing Keystore Change Password X Old Password z pe New Password o Retype Password EE d On the New Password field enter the new password that will be used for the Keystore The new password should be at least six characters Change Password X Retype Password Canca e To confirm enter the new password again that will be used for the Keystore on the Retype Password field Change Password X Old Password x p New Password z perme as le x f Old Password x for New Password fre Retype Password ff SCN iConnect Client v3 1 Installation Manual 36 of 105 g Click the Ok button of the Identity Entry dialog to save the changes Party ID http Zann gs1ph org part
79. rs lineltems netPrice number orders lineltems netPrice reference orders lineltems notes cancel _ Be careful when specifying the column values to avoid parsing errors when importing CSV files Mandatory elements and attributes should always have a value and therefore not be left blank Refer to the data dictionary of the XML Document for more details about each elements and attributes SCN iConnect Client v3 1 Installation Manual 72 of 105 d Click Okto save the changes ADINVC ver 1 0 Element turin 2 ORDERS ver 1 0 orders buyer gln E RETANN ver 1 0 orders cancellfNotD eliveredBy date 15 orders cancellfNotDeliveredBy time 16 orders creationD ate 3 orders deliveryD ate from date 11 orders deliveryD ate from time 12 orders deliveryD ate to date 13 orders deliveryD ate to time 14 orders deliveryLocation gln 10 orders documentld 1 orders lanquage Fd orders notes 17 orders number 6 orders reference 5 orders seller gln 9 orders status 2 orders type 4 orders lineltems cancellfNotDeliveredBy date 27 orders lineltems cancellfNotDeliveredBy time 28 orders lineltems description 20 orders lineltems itemld gtin 19 orders lineltems lineltemNumber 18 orders lineltems netPrice currency 25 orders lineltems netPrice monetaryAmount 26 orders lineltems netPrice number 24 orders lineltems netPrice reference 23 orders lineltems notes 29 zi Cancel 2 How to set up Export XML Mapper Messages containing XML documents can b
80. rts Ok Cancel 2 How to start the Scheduler Click Action Start Scheduler on the menu bar to activate the scheduler eop SCN iConnect Client Olivers Super Store Action Tools Settings View Help Send And Receive Receive Send O System Advisory gt Trash The iConnect Client icon in the system tray will change to show that the scheduler has been started ap 49 7 36 PM Details of the created schedules will be listed on the Rea time Logger panel E Realtime Logger 8 04 03 07 36 01 04 03 07 36 01 INFO 04 03 07 36 01 INFO 04 03 07 36 01 INFO Message 006 08 02T06 00 24 5005Z scnl scn ph moved t Message 2006 08 02T06 03 56 0887Z scnl scn ph moved ti Message moved to My Folder Message moved to My Folder 04 03 07 36 06 04 03 07 36 06 Scheduler has started Send And Receive next schedule Tue 04 Apr 9 00 AM Scheduler is running SCN iConnect Client v3 1 Installation Manual 84 of 105 The iConnect Client can be configured to activate the Scheduler when it is opened by marking the Automatically Start Scheduler When IConnect Starts checkbox in the Scheduler dialog Scheduler X Next Schedule Add Edit Remove Send nd Receive Tue 04 Apr 9 00 4M Iv eile Start Scheduler When IConnect Starts Cancel 3 How to stop the Scheduler Click Action Stop Scheduler on the menu bar to deactivate the scheduler SCN iConnect Clie
81. ry KLAE HTML FILE FILE I Overwrite Existing File cancel _ The iConnect Client will automatically export the content of the message as FILE for non XML documents Content of the messages exported as FILE will be saved using its original file name On the other hand contents of the messages exported as CSV XML or HTML FILE will be saved using a generated file name based on the details of the message Refer to How to set up Export XML File Name Templates on section IV F 3 for details on generating file names c Set the directory to save the exported content Click on the button to open the Directory List dialog Directoy 0 Rate iOa E Ok Cancel SCN iConnect Client v3 1 Installation Manual 19 of 105 d Onthe Directory List dialog click Add button Directory List X Ok Cancel e The Directory dialog will open Click the button and select the directory from the list Click OK to confirm the selected directory Select target directory E My Computer eg 3 Floppy 4 El System C aD Documents and Settings Ei B exported B Program Files RECYCLER AE a A f Exported files can be segregated based on the file name the content of the message will be exported to Enter the directory pattern that will be used for creating subdirectories for the exported files Refer to File Name Patterns in section VII B for
82. s ORDERS ver 1 0 HTML ORDERS ver 1 0 KML of RETANN ver 1 0 CSV RETANN ver 1 0 HTML Revert To Default Test Templates RETANN ver 1 0 XML CSV Format felist data as row gt lt Hlist row as item gt lt Hif item_index O gt lt H oil Revert To Default Test Templates cancel e After editing the template click the Test Templates button for the File Name field to check the template Exporter XML Template Settings X ADINYC ver 1 0 CSV ADINVC ver 1 0 HTML FileName 1 sender sender last_index_of sender length 1 lt if mes ADINYC ver 1 0 XML ORDERS ver 1 0 CSV ORDERS ver 1 0 HTML ORDERS ver 1 0 XML RETANN ver 1 0 CSV RETANN ver 1 0 HTML RETANN ver 1 0 XML Revert To Default Test Templates cancel All tests use the following sample values for each of the data model messageld 2005 08 27T23 00 51 7149Z scn1 scn ph documented 1111 sender http www gs1ph party senderGIn recipient http www gsiph party recipientGin type name the name of the chosen document type type format FILE type version the version of the chosen document type filename filename dat SCN iConnect Client v3 1 Installation Manual 76 of 105 If unsure of the template change the template back to its default value by clicking the Revert to Default button for the File Name field Exporter XML Template Settings X ADINYC ver 1 0 CSV ADINYC ver 1 0
83. save the file in the selected directory Directory Director import O Pattern report cS tay Cancel j Continue to add more directories if the imported files need to be moved into multiple directories The sequence of the directories will be the same sequence that will be used when moving imported file Click the Move Up or Move Down to move the selected directories up or down the list respectively Add C import report d 3 txt C Documents and Settings 4dministrator Desktop PS Edit Remove Move Up Cancel _ SCN iConnect Client v3 1 Installation Manual 50 of 105 k Click Okto confirm the list of directories that will be used to move the imported file Directory List X C import report d 3 txt Set the recipients for this type of message Take note that an XML document message already has a defined recipient in its content Click on the button to open the list of recipients Select recipient s X Select All Remove All Add J Creators Manufacturing O Warehousing Company inc Ok Cancel Select the recipients for this type of message New contacts can be added by clicking on the Add button Refer to How to set up the Contact List in section IV C for details on how to add new contact details Select recipient s X Select All Remove All J Creators Manufacturing O Warehousing Company inc Ok Cancel
84. smess RETAILER Supermarket y Address 4 56 Congressional Ave Quezon Ciy State i Metro Mana ss s i C O O O C Eoun i Moc e ea a Generate New Key Pair Export Public Key SCN iConnect Client v3 1 Installation Manual 31 of 105 i After verifying the imported certificate a password dialog will open Enter the password that will be used to secure the Keystore The password must be at least six characters Change Password X Old Password __ New Password s pee Retype Password pe Carcel _ e j Click the OK button for the password dialog to continue Change Password X Old Password x A New Password pee Retype Password po Cancel k Click the OK button of the Identity Entry dialog to save the newly created Keystore Identity Entry x Party ID http www gs ph org party 4805305730269 Company Name Olivers Super Store Key Store Import Export View Password seen Change Generate New Keystore IV Ask For Password When IConnect Starts Cancel 2 How to import an existing Keystore There is no need to create a new Keystore if one already exists An existing Keystore file can be imported into the iConnect Client program to use the keys and information that it has When imported the iConnect Client will create its own copy of the Keystore This means that any changes made to the original file wi
85. t List A Contact List contains internal codes of an entity that are needed to determine the recipient of a non XML Document file Refer to How to set up the Contact List in section IV C for more details Tasks Tasks can simplify some common actions being done in the iConnect Client by predefining the values that are needed to perform specific actions Refer to How to set up a Task in section IV D for more details SCN iConnect Client v3 1 Installation Manual 8 of 105 6 Task Groups Tasks can only be executed after it has been assigned to a Task Group Task Groups can also be used to group together some task to execute a sequence of tasks by a single click Refer to How to set up a Task Group in section IV E for more details 7 XML Documents XML Document settings are needed to be configured if the user needs a more specific format and mapping configuration Refer to How to set up an XML Document in section IV F for more details 8 Scheduler A Task Group may be automatically executed by defining the time it will run Refer to How to set up the Scheduler in section IV G for more details II How to start the iConnect Client The iConnect Client can be started by double clicking the iConnect Client icon found in the desktop Recycle Bin ae Co fits iCoannect Client vit Ai start It can also be started by clicking the iConnect Client icon found in the Start Menu Click on Start All Programs iConnect
86. t Message Task X Document Type y ORDERS ver 1 0 Export As ICS FILE a Destination Directory C exported d 13 A C exported backup T Overwrite Existing File Cancel m The new Export Message Task will be listed in the lists of tasks under Export Message The details of the created task can be viewed and edited by selecting it Apply Updates Delete Message Document Ippe JORDERS ver 1 0 Export Message Export As csv FILE Import Message REPORT Destination Directory C exported d 1 3 E Move Message C exported backup Receive Message Send Message M Overwrite Existing File cancel _ This is what will happen when this Export Message Task is executed The Export Message ORDERS ver 1 0 will export the content of the messages of type ORDERS version 1 0 ORDERS XML 1 0 x found in the iConnect Client folder Folder Inbox with a status of RECEIVED as CSV files ID Outbox Inbox 3 Messageld Sender Recipient Document Type Timestamp Status M4 2006 08 0270 Creators Manuf Olivers Super ORDERS 02 4ug 2 03 5 RECEIVED SCN iConnect Client v3 1 Installation Manual 58 of 105 The files will be saved in two directories First in C exported xxxxxxxxxxxxx directory where XXXXXXXXXXXXX iS the thirteen digits found at the beginning of the file name of the file
87. tems netPrice number orders lineltems netPrice reference orders lineltems notes Cancel _ Elemert 0 tun 8 c Specify the column number where the XML Element or Attribute is located in the CSV file Set the column number to 0 for elements and attributes that will not be used so that these data will not be included in generated CSV file Export XML Mapper Settings ADINVC ver 1 0 ORDERS ver 1 0 RETANN ver 1 0 orders buyer gln orders cancellfNotDeliveredBy date orders cancellfNotDeliveredBy time orders creationD ate orders deliveryD ate from date orders deliveryD ate from time orders deliveryD ate to date orders deliveryD ate to time orders deliveryLocation gln orders documentld orders lanquage orders notes orders number orders reference orders seller gln orders status orders type orders lineltems cancellfNotDeliveredBy date orders lineltems cancellfNotDeliveredBy time orders lineltems description orders lineltems itemld gtin orders lineltems lineltemN umber orders lineltems netPrice currency orders lineltems netPrice monetaryAmount orders lineltems netPrice number orders lineltems netPrice reference orders lineltems notes Cancel _ SSS SS Elemert 0 Ctr E Be careful when specifying the column values to avoid parsing errors when exporting to CSV files Try not to assign similar column values to elements and attributes as this may cause unpredictable outputs SCN iConnect Client
88. ts content has already been extracted UNSENT message that failed to be sent to the iConnect server Filename the filename from where the content of the message was imported from Folder the folder of the message 1 How to create a message a On the menu bar click Action Import Message SCN iConnect Client Action Tools Settings View Receive i Import Message Start Scheduler Jnieck Setting Exit SCN iConnect Client v3 1 Installation Manual 15 of 105 b The Import Message dialog will open Select the document type of the new message from the list Refer to How to set up Task for Import Message in section IV D 1 for details on how to add document types for importing non XML document messages Import Message X Document Type ADINVC ver 1 0 i File s ORDERS ver 1 0 REPORT RETANN ver 1 0 coca _ c Set files to be imported Click the button to open the file dialog d Locate and select the file to be imported from the file dialog Multiple files can be selected Select files to import Ri Ea Look in a source e c EA e report0124 txt TES File name reportO1 24 txt report0123 txt Open My Network P fa he Files of type a 7 Cancel Hs When importing files for an XML Document only files Comma Separated Value csv and Extensible Markup Language xml files can be selected Choose the type of file to import from the Files of Type l
89. ty voce iConnect Preferences This is the Identity Entry dialog Party ID E Company Name o i Key Store Import Export View Password Stes Sl ee Change Generate New Keystore I Ask For Password When IConnect Starts Cancel SCN iConnect Client v3 1 Installation Manual 28 of 105 1 How to generate a new Keystore The Keystore file consists of the details of the identity a key pair private key and public key and a public key certificate To create a Keystore a private and public key must first be generated a On the Identity Entry dialog click the Generate New Keystore button Identity Entry X Party ID Company Name Key Store Import Export View Password a Change Generate New Keystore S I Ask For Password When IConnect Starts cmos b The Identity Details dialog will open Identity Details X Party Id http w gs ph org party Company Name Nature Of Business Address State Country All fields will appear disabled if a key pair has already been generated Click the Generate New Key Pair button to change the previously created key pair with a new one Identity Details X http Ww as ph ora party Generate New Key Pair Export Public Key Import Certificate ETER Ok Cancel Enter the following details for the new identity Party Id Enter the GLN that wil
90. ue on the Retry field is the number of seconds between retries Internet ISP 4523333 h The value on the Delay field is the number of times the iConnect Client will try to connect to a dial up account when it has encountered an error during connecting Connec tion 2 Howto set up the Local Area Network LAN Proxy Connection Some network passes through a proxy server to be able to connect to the internet SCN iConnect Client v3 1 Installation Manual 42 of 105 d Click the LAN Proxy Settings button on the Connection dialog to configure the required proxy connection Enty Name Phone Number Add Internet ISP 4523333 Internet ISP2 4539999 Edit Remove Move Up Move Down Retry lo Delay seconds p Timeout minutes lo J LAN Proxy Settings Ok Cancel The LAN Proxy Settings dialog will open T Enable proxy settings Pray Enter the following details of the proxy connection Proxy URL Enter the IP Address or the URL of the proxy server Proxy Port Enter the port of the proxy server Proxy User Name Enter the user name of the account that will be authenticated by the proxy server Proxy Password Enter the password of the account Proxy Domain Enter the domain of the proxy server User Agent Enter the name that will be used to identity the iConnect Client application to the proxy server
91. up Wizard This will install SCN iConnect Client 3 1 on your computer It is recommended that you close all other applications before continuing Click Next to continue or Cancel to exit Setup Ne cren 3 Select the folder on where to store the iConnect Client Enter the full path of the folder or click the Browse button to choose a folder Click the Mex button to continue i Setup SCN iConnect Client 4 S iol x Select Destination Location b Where should SCN iConnect Client be installed amp Gd Setup will install SCN iConnect Client into the following folder Tocontinue click Next If you would like to select a different folder click Browse C Program Files iConnect Client v3 Browse At least 172 9 MB of free disk space is required uk Cancel SCN iConnect Client v3 1 Installation Manual 5 of 105 4 Select the components of the iConnect Client to install Click the Next button to continue i Setup SCN iConnect Client Select Components Which components should be installed Select the components you want to install clear the components you do not want to install Click Next when you are ready to continue iConnect Client Program Files 74 5 MB 5 O Ad Billing Statement ver 1 0 XML Document Type Component 0 2 MB O Ad Invoice ver 1 0XML Document Type Component 0 3 MB CO Despatch Advice ver 1 0 XML Document Type Component 0 2 MB O Execute Task Co
92. v3 1 Installation Manual 74 of 105 d Click Okto save the changes ADINYC ver 1 0 ORDERS ver 1 0 i RETANN ver 1 0 orders cancellfNotD eliveredBy date 15 orders cancellfNotDeliveredBy time 16 orders creationD ate 3 orders deliveryD ate from date 11 orders deliveryD ate from time 12 orders deliveryD ate to date 13 orders deliveryD ate to time 14 orders deliveryLocation gln 10 orders documentld 1 orders lanquage Fd orders notes 17 orders number 6 orders reference 5 orders seller gln 9 orders status 2 orders type 4 orders lineltems cancellfNotDeliveredBy date 27 orders lineltems cancellfNotDeliveredBy time 28 orders lineltems description 20 orders lineltems itemld gtin 19 orders lineltems lineltemN umber 18 orders lineltems netPrice currency 25 orders lineltems netPrice monetaryAmount 26 orders lineltems netPrice number 24 orders lineltems netPrice reference 23 orders lineltems notes 29 x e Cancel 3 How to set up Export XML File Name Templates The File Name template defines how the file name will be generated for the selected type of message and file type Knowledge of Freemarker http freemarker sourceforge net is needed when editing the templates a Click the Settings Export XML Template from the menu bar to open the Export XML Template Settings dialog et SCN iConnect Client Olivers Super Store Action Tools Settings View Help Tasks Import XML Mapper D Folders 53 Export XML
93. w iconnect net ph SCN iConnect Client v3 1 Installation Manual 101 of 105 B File Name Patterns Below are file name patterns with their respective examples and the corresponding targeted value of the sample file E Filename Pattern Sample File Targeted Value PE P 2 Lunescacanaconac g DAZ File names starting with the letters RC followed by 2 digits denoted by d 2 followed by 4 digits denoted by d 4 and ends with a txt extension name are valid files for this pattern The 2 digits denoted by d 2 is its targeted value 2 File names starting with letters DLV followed by the letters SC followed by 4 digits denoted by d 4 followed by another 4 digits denoted by d 4 and ends with 2 digits denoted by d 2 are valid files for this pattern The letters SC followed by 4 digits denoted by SC d 4 is its targeted value 3 Filenames starting with letter D followed by 4 digits denoted by d 4 followed by another digit followed by a letter denoted by w and ends with a zip extension name are valid files for this pattern No value is targeted Note In the iConnect Client the targeted values are used as input values to a parameter For example when files are imported these values identify the recipient of the files by matching them against the company codes listed in the Contact List Below are other syntax and definitions of file name patterns SCN iConn
94. y 4805305730269 Company Name Olivers Super Store Key Store Import Export View Password few Change Generate New Keystore I Ask For Password When IConnect Starts How to enable the Connect Client Password Protection To add security to the iConnect Client a password may be prompted before the application will open This password is the same as the password used for the Keystore Select the Ask For Password When IConnect Starts checkbox in the Identity Entry dialog to enable this feature Identity Entry X Party ID http vww gs1 ph org party 48053057 30269 Company Name Olivers Super Store Key Store Import Export View Password few Change Generate New Keystore v al For Password When IConnect Starts Party td Company Name Password em Cancel SCN iConnect Client v3 1 Installation Manual 37 of 105 B How to set up the Connection The iConnect Client requires an internet connection to be able to send and receive messages from the server A dial up connection may be started if the iConnect Client did not detect an internet connection from the computer Click Settings Connection from the menu bar to open the Connection dialog 1 Tools Settings View Help Tasks ders 53 Import XML Mapper Export XML Mapper Connection Identity iConnect Preferences M System Advisory This is the Connection dialog Enty Name

iConnect Client v3.1 Installation Manual

Contents

Download Pdf Manuals

Related Search

Related Contents